a8e68085ed
declaration for the interface driver from "foo" to "if_foo" but leave the declaration for the miibus attached to the interface driver alone. This lets the internal module name be "if_foo" while still allowing the miibus instances to attach to "foo." This should allow ifconfig to autoload driver modules again without breaking the miibus attach.
1771 lines
38 KiB
C
1771 lines
38 KiB
C
/*
|
|
* Copyright (c) 1997, 1998, 1999
|
|
* Bill Paul <wpaul@ee.columbia.edu>. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Bill Paul.
|
|
* 4. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY Bill Paul AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL Bill Paul OR THE VOICES IN HIS HEAD
|
|
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF
|
|
* THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* ADMtek AL981 Comet and AN985 Centaur fast ethernet PCI NIC driver.
|
|
* Datasheets for the AL981 are available from http://www.admtek.com.tw.
|
|
*
|
|
* Written by Bill Paul <wpaul@ee.columbia.edu>
|
|
* Electrical Engineering Department
|
|
* Columbia University, New York City
|
|
*/
|
|
|
|
/*
|
|
* The ADMtek AL981 Comet is still another DEC 21x4x clone. It's
|
|
* a reasonably close copy of the tulip, except for the receiver filter
|
|
* programming. Where the DEC chip has a special setup frame that
|
|
* needs to be downloaded into the transmit DMA engine, the ADMtek chip
|
|
* has physical address and multicast address registers.
|
|
*
|
|
* The AN985 is an update to the AL981 which is mostly the same, except
|
|
* for the following things:
|
|
* - The AN985 uses a 99C66 EEPROM which requires a slightly different
|
|
* bit sequence to initiate a read.
|
|
* - The AN985 uses a serial MII interface instead of providing direct
|
|
* access to the PHY registers (it uses an internal PHY though).
|
|
* Although the datasheet for the AN985 is not yet available, you can
|
|
* use an AL981 datasheet as a reference for most of the chip functions,
|
|
* except for the MII interface which matches the DEC 21x4x specification
|
|
* (bits 16, 17, 18 and 19 in the serial I/O register control the MII).
|
|
*/
|
|
|
|
#include "bpf.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
|
|
#if NBPF > 0
|
|
#include <net/bpf.h>
|
|
#endif
|
|
|
|
#include <vm/vm.h> /* for vtophys */
|
|
#include <vm/pmap.h> /* for vtophys */
|
|
#include <machine/clock.h> /* for DELAY */
|
|
#include <machine/bus_pio.h>
|
|
#include <machine/bus_memio.h>
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <dev/mii/mii.h>
|
|
#include <dev/mii/miivar.h>
|
|
|
|
#include <pci/pcireg.h>
|
|
#include <pci/pcivar.h>
|
|
|
|
/* Enable workaround for small transmitter bug. */
|
|
#define AL_TX_STALL_WAR
|
|
|
|
#define AL_USEIOSPACE
|
|
|
|
#include <pci/if_alreg.h>
|
|
|
|
#include "miibus_if.h"
|
|
|
|
#ifndef lint
|
|
static const char rcsid[] =
|
|
"$FreeBSD$";
|
|
#endif
|
|
|
|
/*
|
|
* Various supported device vendors/types and their names.
|
|
*/
|
|
static struct al_type al_devs[] = {
|
|
{ AL_VENDORID, AL_DEVICEID_AL981, "ADMtek AL981 10/100BaseTX" },
|
|
{ AL_VENDORID, AL_DEVICEID_AN985, "ADMtek AN985 10/100BaseTX" },
|
|
{ 0, 0, NULL }
|
|
};
|
|
|
|
static int al_probe __P((device_t));
|
|
static int al_attach __P((device_t));
|
|
static int al_detach __P((device_t));
|
|
|
|
static int al_newbuf __P((struct al_softc *,
|
|
struct al_desc *,
|
|
struct mbuf *));
|
|
static int al_encap __P((struct al_softc *,
|
|
struct mbuf *, u_int32_t *));
|
|
|
|
static void al_rxeof __P((struct al_softc *));
|
|
static void al_txeof __P((struct al_softc *));
|
|
static void al_tick __P((void *));
|
|
static void al_intr __P((void *));
|
|
static void al_start __P((struct ifnet *));
|
|
static int al_ioctl __P((struct ifnet *, u_long, caddr_t));
|
|
static void al_init __P((void *));
|
|
static void al_stop __P((struct al_softc *));
|
|
static void al_watchdog __P((struct ifnet *));
|
|
static void al_shutdown __P((device_t));
|
|
static int al_ifmedia_upd __P((struct ifnet *));
|
|
static void al_ifmedia_sts __P((struct ifnet *, struct ifmediareq *));
|
|
|
|
static void al_delay __P((struct al_softc *));
|
|
static void al_eeprom_idle __P((struct al_softc *));
|
|
static void al_eeprom_putbyte __P((struct al_softc *, int));
|
|
static void al_eeprom_getword __P((struct al_softc *, int, u_int16_t *));
|
|
static void al_read_eeprom __P((struct al_softc *, caddr_t, int,
|
|
int, int));
|
|
|
|
static void al_mii_writebit __P((struct al_softc *, int));
|
|
static int al_mii_readbit __P((struct al_softc *));
|
|
static void al_mii_sync __P((struct al_softc *));
|
|
static void al_mii_send __P((struct al_softc *, u_int32_t, int));
|
|
static int al_mii_readreg __P((struct al_softc *, struct al_mii_frame *));
|
|
static int al_mii_writereg __P((struct al_softc *, struct al_mii_frame *));
|
|
|
|
static int al_miibus_readreg __P((device_t, int, int));
|
|
static int al_miibus_writereg __P((device_t, int, int, int));
|
|
static void al_miibus_statchg __P((device_t));
|
|
|
|
static u_int32_t al_calchash __P((caddr_t));
|
|
static void al_setmulti __P((struct al_softc *));
|
|
static void al_reset __P((struct al_softc *));
|
|
static int al_list_rx_init __P((struct al_softc *));
|
|
static int al_list_tx_init __P((struct al_softc *));
|
|
|
|
#ifdef AL_USEIOSPACE
|
|
#define AL_RES SYS_RES_IOPORT
|
|
#define AL_RID AL_PCI_LOIO
|
|
#else
|
|
#define AL_RES SYS_RES_MEMORY
|
|
#define AL_RID AL_PCI_LOMEM
|
|
#endif
|
|
|
|
static device_method_t al_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, al_probe),
|
|
DEVMETHOD(device_attach, al_attach),
|
|
DEVMETHOD(device_detach, al_detach),
|
|
DEVMETHOD(device_shutdown, al_shutdown),
|
|
|
|
/* bus interface */
|
|
DEVMETHOD(bus_print_child, bus_generic_print_child),
|
|
DEVMETHOD(bus_driver_added, bus_generic_driver_added),
|
|
|
|
/* MII interface */
|
|
DEVMETHOD(miibus_readreg, al_miibus_readreg),
|
|
DEVMETHOD(miibus_writereg, al_miibus_writereg),
|
|
DEVMETHOD(miibus_statchg, al_miibus_statchg),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t al_driver = {
|
|
"al",
|
|
al_methods,
|
|
sizeof(struct al_softc),
|
|
};
|
|
|
|
static devclass_t al_devclass;
|
|
|
|
DRIVER_MODULE(if_al, pci, al_driver, al_devclass, 0, 0);
|
|
DRIVER_MODULE(miibus, al, miibus_driver, miibus_devclass, 0, 0);
|
|
|
|
#define AL_SETBIT(sc, reg, x) \
|
|
CSR_WRITE_4(sc, reg, \
|
|
CSR_READ_4(sc, reg) | x)
|
|
|
|
#define AL_CLRBIT(sc, reg, x) \
|
|
CSR_WRITE_4(sc, reg, \
|
|
CSR_READ_4(sc, reg) & ~x)
|
|
|
|
#define SIO_SET(x) \
|
|
CSR_WRITE_4(sc, AL_SIO, \
|
|
CSR_READ_4(sc, AL_SIO) | x)
|
|
|
|
#define SIO_CLR(x) \
|
|
CSR_WRITE_4(sc, AL_SIO, \
|
|
CSR_READ_4(sc, AL_SIO) & ~x)
|
|
|
|
static void al_delay(sc)
|
|
struct al_softc *sc;
|
|
{
|
|
int idx;
|
|
|
|
for (idx = (300 / 33) + 1; idx > 0; idx--)
|
|
CSR_READ_4(sc, AL_BUSCTL);
|
|
}
|
|
|
|
static void al_eeprom_idle(sc)
|
|
struct al_softc *sc;
|
|
{
|
|
register int i;
|
|
|
|
CSR_WRITE_4(sc, AL_SIO, AL_SIO_EESEL);
|
|
al_delay(sc);
|
|
AL_SETBIT(sc, AL_SIO, AL_SIO_ROMCTL_READ);
|
|
al_delay(sc);
|
|
AL_SETBIT(sc, AL_SIO, AL_SIO_EE_CS);
|
|
al_delay(sc);
|
|
AL_SETBIT(sc, AL_SIO, AL_SIO_EE_CLK);
|
|
al_delay(sc);
|
|
|
|
for (i = 0; i < 25; i++) {
|
|
AL_CLRBIT(sc, AL_SIO, AL_SIO_EE_CLK);
|
|
al_delay(sc);
|
|
AL_SETBIT(sc, AL_SIO, AL_SIO_EE_CLK);
|
|
al_delay(sc);
|
|
}
|
|
|
|
AL_CLRBIT(sc, AL_SIO, AL_SIO_EE_CLK);
|
|
al_delay(sc);
|
|
AL_CLRBIT(sc, AL_SIO, AL_SIO_EE_CS);
|
|
al_delay(sc);
|
|
CSR_WRITE_4(sc, AL_SIO, 0x00000000);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Send a read command and address to the EEPROM, check for ACK.
|
|
*/
|
|
static void al_eeprom_putbyte(sc, addr)
|
|
struct al_softc *sc;
|
|
int addr;
|
|
{
|
|
register int d, i;
|
|
|
|
/*
|
|
* The AN985 has a 99C66 EEPROM on it instead of
|
|
* a 99C64. It uses a different bit sequence for
|
|
* specifying the "read" opcode.
|
|
*/
|
|
if (sc->al_did == AL_DEVICEID_AN985)
|
|
d = addr | (AL_EECMD_READ << 2);
|
|
else
|
|
d = addr | AL_EECMD_READ;
|
|
|
|
/*
|
|
* Feed in each bit and stobe the clock.
|
|
*/
|
|
for (i = 0x400; i; i >>= 1) {
|
|
if (d & i) {
|
|
SIO_SET(AL_SIO_EE_DATAIN);
|
|
} else {
|
|
SIO_CLR(AL_SIO_EE_DATAIN);
|
|
}
|
|
al_delay(sc);
|
|
SIO_SET(AL_SIO_EE_CLK);
|
|
al_delay(sc);
|
|
SIO_CLR(AL_SIO_EE_CLK);
|
|
al_delay(sc);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Read a word of data stored in the EEPROM at address 'addr.'
|
|
*/
|
|
static void al_eeprom_getword(sc, addr, dest)
|
|
struct al_softc *sc;
|
|
int addr;
|
|
u_int16_t *dest;
|
|
{
|
|
register int i;
|
|
u_int16_t word = 0;
|
|
|
|
/* Force EEPROM to idle state. */
|
|
al_eeprom_idle(sc);
|
|
|
|
/* Enter EEPROM access mode. */
|
|
CSR_WRITE_4(sc, AL_SIO, AL_SIO_EESEL);
|
|
al_delay(sc);
|
|
AL_SETBIT(sc, AL_SIO, AL_SIO_ROMCTL_READ);
|
|
al_delay(sc);
|
|
AL_SETBIT(sc, AL_SIO, AL_SIO_EE_CS);
|
|
al_delay(sc);
|
|
AL_CLRBIT(sc, AL_SIO, AL_SIO_EE_CLK);
|
|
al_delay(sc);
|
|
|
|
/*
|
|
* Send address of word we want to read.
|
|
*/
|
|
al_eeprom_putbyte(sc, addr);
|
|
|
|
/*
|
|
* Start reading bits from EEPROM.
|
|
*/
|
|
for (i = 0x8000; i; i >>= 1) {
|
|
SIO_SET(AL_SIO_EE_CLK);
|
|
al_delay(sc);
|
|
if (CSR_READ_4(sc, AL_SIO) & AL_SIO_EE_DATAOUT)
|
|
word |= i;
|
|
al_delay(sc);
|
|
SIO_CLR(AL_SIO_EE_CLK);
|
|
al_delay(sc);
|
|
}
|
|
|
|
/* Turn off EEPROM access mode. */
|
|
al_eeprom_idle(sc);
|
|
|
|
*dest = word;
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Read a sequence of words from the EEPROM.
|
|
*/
|
|
static void al_read_eeprom(sc, dest, off, cnt, swap)
|
|
struct al_softc *sc;
|
|
caddr_t dest;
|
|
int off;
|
|
int cnt;
|
|
int swap;
|
|
{
|
|
int i;
|
|
u_int16_t word = 0, *ptr;
|
|
|
|
for (i = 0; i < cnt; i++) {
|
|
al_eeprom_getword(sc, off + i, &word);
|
|
ptr = (u_int16_t *)(dest + (i * 2));
|
|
if (swap)
|
|
*ptr = ntohs(word);
|
|
else
|
|
*ptr = word;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Write a bit to the MII bus.
|
|
*/
|
|
static void al_mii_writebit(sc, bit)
|
|
struct al_softc *sc;
|
|
int bit;
|
|
{
|
|
if (bit)
|
|
CSR_WRITE_4(sc, AL_SIO, AL_SIO_ROMCTL_WRITE|AL_SIO_MII_DATAOUT);
|
|
else
|
|
CSR_WRITE_4(sc, AL_SIO, AL_SIO_ROMCTL_WRITE);
|
|
|
|
AL_SETBIT(sc, AL_SIO, AL_SIO_MII_CLK);
|
|
AL_CLRBIT(sc, AL_SIO, AL_SIO_MII_CLK);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Read a bit from the MII bus.
|
|
*/
|
|
static int al_mii_readbit(sc)
|
|
struct al_softc *sc;
|
|
{
|
|
CSR_WRITE_4(sc, AL_SIO, AL_SIO_ROMCTL_READ|AL_SIO_MII_DIR);
|
|
CSR_READ_4(sc, AL_SIO);
|
|
AL_SETBIT(sc, AL_SIO, AL_SIO_MII_CLK);
|
|
AL_CLRBIT(sc, AL_SIO, AL_SIO_MII_CLK);
|
|
if (CSR_READ_4(sc, AL_SIO) & AL_SIO_MII_DATAIN)
|
|
return(1);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Sync the PHYs by setting data bit and strobing the clock 32 times.
|
|
*/
|
|
static void al_mii_sync(sc)
|
|
struct al_softc *sc;
|
|
{
|
|
register int i;
|
|
|
|
CSR_WRITE_4(sc, AL_SIO, AL_SIO_ROMCTL_WRITE);
|
|
|
|
for (i = 0; i < 32; i++)
|
|
al_mii_writebit(sc, 1);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Clock a series of bits through the MII.
|
|
*/
|
|
static void al_mii_send(sc, bits, cnt)
|
|
struct al_softc *sc;
|
|
u_int32_t bits;
|
|
int cnt;
|
|
{
|
|
int i;
|
|
|
|
for (i = (0x1 << (cnt - 1)); i; i >>= 1)
|
|
al_mii_writebit(sc, bits & i);
|
|
}
|
|
|
|
/*
|
|
* Read an PHY register through the MII.
|
|
*/
|
|
static int al_mii_readreg(sc, frame)
|
|
struct al_softc *sc;
|
|
struct al_mii_frame *frame;
|
|
|
|
{
|
|
int i, ack, s;
|
|
|
|
s = splimp();
|
|
|
|
/*
|
|
* Set up frame for RX.
|
|
*/
|
|
frame->mii_stdelim = AL_MII_STARTDELIM;
|
|
frame->mii_opcode = AL_MII_READOP;
|
|
frame->mii_turnaround = 0;
|
|
frame->mii_data = 0;
|
|
|
|
/*
|
|
* Sync the PHYs.
|
|
*/
|
|
al_mii_sync(sc);
|
|
|
|
/*
|
|
* Send command/address info.
|
|
*/
|
|
al_mii_send(sc, frame->mii_stdelim, 2);
|
|
al_mii_send(sc, frame->mii_opcode, 2);
|
|
al_mii_send(sc, frame->mii_phyaddr, 5);
|
|
al_mii_send(sc, frame->mii_regaddr, 5);
|
|
|
|
#ifdef notdef
|
|
/* Idle bit */
|
|
al_mii_writebit(sc, 1);
|
|
al_mii_writebit(sc, 0);
|
|
#endif
|
|
|
|
/* Check for ack */
|
|
ack = al_mii_readbit(sc);
|
|
|
|
/*
|
|
* Now try reading data bits. If the ack failed, we still
|
|
* need to clock through 16 cycles to keep the PHY(s) in sync.
|
|
*/
|
|
if (ack) {
|
|
for(i = 0; i < 16; i++) {
|
|
al_mii_readbit(sc);
|
|
}
|
|
goto fail;
|
|
}
|
|
|
|
for (i = 0x8000; i; i >>= 1) {
|
|
if (!ack) {
|
|
if (al_mii_readbit(sc))
|
|
frame->mii_data |= i;
|
|
}
|
|
}
|
|
|
|
fail:
|
|
|
|
al_mii_writebit(sc, 0);
|
|
al_mii_writebit(sc, 0);
|
|
|
|
splx(s);
|
|
|
|
if (ack)
|
|
return(1);
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Write to a PHY register through the MII.
|
|
*/
|
|
static int al_mii_writereg(sc, frame)
|
|
struct al_softc *sc;
|
|
struct al_mii_frame *frame;
|
|
|
|
{
|
|
int s;
|
|
|
|
s = splimp();
|
|
/*
|
|
* Set up frame for TX.
|
|
*/
|
|
|
|
frame->mii_stdelim = AL_MII_STARTDELIM;
|
|
frame->mii_opcode = AL_MII_WRITEOP;
|
|
frame->mii_turnaround = AL_MII_TURNAROUND;
|
|
|
|
/*
|
|
* Sync the PHYs.
|
|
*/
|
|
al_mii_sync(sc);
|
|
|
|
al_mii_send(sc, frame->mii_stdelim, 2);
|
|
al_mii_send(sc, frame->mii_opcode, 2);
|
|
al_mii_send(sc, frame->mii_phyaddr, 5);
|
|
al_mii_send(sc, frame->mii_regaddr, 5);
|
|
al_mii_send(sc, frame->mii_turnaround, 2);
|
|
al_mii_send(sc, frame->mii_data, 16);
|
|
|
|
/* Idle bit. */
|
|
al_mii_writebit(sc, 0);
|
|
al_mii_writebit(sc, 0);
|
|
|
|
splx(s);
|
|
|
|
return(0);
|
|
}
|
|
|
|
static int al_miibus_readreg(dev, phy, reg)
|
|
device_t dev;
|
|
int phy, reg;
|
|
{
|
|
struct al_mii_frame frame;
|
|
u_int16_t rval = 0;
|
|
u_int16_t phy_reg = 0;
|
|
struct al_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
/*
|
|
* Note: both the AL981 and AN985 have internal PHYs,
|
|
* however the AL981 provides direct access to the PHY
|
|
* registers while the AN985 uses a serial MII interface.
|
|
* The AN985's MII interface is also buggy in that you
|
|
* can read from any MII address (0 to 31), but only address 1
|
|
* behaves normally. To deal with both cases, we pretend
|
|
* that the PHY is at MII address 1.
|
|
*/
|
|
if (phy != 1)
|
|
return(0);
|
|
|
|
if (sc->al_did == AL_DEVICEID_AN985) {
|
|
bzero((char *)&frame, sizeof(frame));
|
|
|
|
frame.mii_phyaddr = phy;
|
|
frame.mii_regaddr = reg;
|
|
al_mii_readreg(sc, &frame);
|
|
|
|
return(frame.mii_data);
|
|
}
|
|
|
|
switch(reg) {
|
|
case MII_BMCR:
|
|
phy_reg = AL_BMCR;
|
|
break;
|
|
case MII_BMSR:
|
|
phy_reg = AL_BMSR;
|
|
break;
|
|
case MII_PHYIDR1:
|
|
phy_reg = AL_VENID;
|
|
break;
|
|
case MII_PHYIDR2:
|
|
phy_reg = AL_DEVID;
|
|
break;
|
|
case MII_ANAR:
|
|
phy_reg = AL_ANAR;
|
|
break;
|
|
case MII_ANLPAR:
|
|
phy_reg = AL_LPAR;
|
|
break;
|
|
case MII_ANER:
|
|
phy_reg = AL_ANER;
|
|
break;
|
|
default:
|
|
printf("al%d: read: bad phy register %x\n",
|
|
sc->al_unit, reg);
|
|
return(0);
|
|
break;
|
|
}
|
|
|
|
rval = CSR_READ_4(sc, phy_reg) & 0x0000FFFF;
|
|
|
|
if (rval == 0xFFFF)
|
|
return(0);
|
|
|
|
return(rval);
|
|
}
|
|
|
|
static int al_miibus_writereg(dev, phy, reg, data)
|
|
device_t dev;
|
|
int phy, reg, data;
|
|
{
|
|
struct al_mii_frame frame;
|
|
struct al_softc *sc;
|
|
u_int16_t phy_reg = 0;
|
|
|
|
sc = device_get_softc(dev);
|
|
|
|
if (phy != 1)
|
|
return(0);
|
|
|
|
if (sc->al_did == AL_DEVICEID_AN985) {
|
|
bzero((char *)&frame, sizeof(frame));
|
|
|
|
frame.mii_phyaddr = phy;
|
|
frame.mii_regaddr = reg;
|
|
frame.mii_data = data;
|
|
|
|
al_mii_writereg(sc, &frame);
|
|
return(0);
|
|
}
|
|
|
|
switch(reg) {
|
|
case MII_BMCR:
|
|
phy_reg = AL_BMCR;
|
|
break;
|
|
case MII_BMSR:
|
|
phy_reg = AL_BMSR;
|
|
break;
|
|
case MII_PHYIDR1:
|
|
phy_reg = AL_VENID;
|
|
break;
|
|
case MII_PHYIDR2:
|
|
phy_reg = AL_DEVID;
|
|
break;
|
|
case MII_ANAR:
|
|
phy_reg = AL_ANAR;
|
|
break;
|
|
case MII_ANLPAR:
|
|
phy_reg = AL_LPAR;
|
|
break;
|
|
case MII_ANER:
|
|
phy_reg = AL_ANER;
|
|
break;
|
|
default:
|
|
printf("al%d: phy_write: bad phy register %x\n",
|
|
sc->al_unit, reg);
|
|
return(0);
|
|
break;
|
|
}
|
|
|
|
CSR_WRITE_4(sc, phy_reg, data);
|
|
|
|
return(0);
|
|
}
|
|
|
|
static void al_miibus_statchg(dev)
|
|
device_t dev;
|
|
{
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Calculate CRC of a multicast group address, return the lower 6 bits.
|
|
*/
|
|
static u_int32_t al_calchash(addr)
|
|
caddr_t addr;
|
|
{
|
|
u_int32_t crc, carry;
|
|
int i, j;
|
|
u_int8_t c;
|
|
|
|
/* Compute CRC for the address value. */
|
|
crc = 0xFFFFFFFF; /* initial value */
|
|
|
|
for (i = 0; i < 6; i++) {
|
|
c = *(addr + i);
|
|
for (j = 0; j < 8; j++) {
|
|
carry = ((crc & 0x80000000) ? 1 : 0) ^ (c & 0x01);
|
|
crc <<= 1;
|
|
c >>= 1;
|
|
if (carry)
|
|
crc = (crc ^ 0x04c11db6) | carry;
|
|
}
|
|
}
|
|
|
|
/* return the filter bit position */
|
|
return((crc >> 26) & 0x0000003F);
|
|
}
|
|
|
|
static void al_setmulti(sc)
|
|
struct al_softc *sc;
|
|
{
|
|
struct ifnet *ifp;
|
|
int h = 0;
|
|
u_int32_t hashes[2] = { 0, 0 };
|
|
struct ifmultiaddr *ifma;
|
|
u_int32_t rxfilt;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
rxfilt = CSR_READ_4(sc, AL_NETCFG);
|
|
|
|
if (ifp->if_flags & IFF_ALLMULTI || ifp->if_flags & IFF_PROMISC) {
|
|
rxfilt |= AL_NETCFG_RX_ALLMULTI;
|
|
CSR_WRITE_4(sc, AL_NETCFG, rxfilt);
|
|
return;
|
|
} else
|
|
rxfilt &= ~AL_NETCFG_RX_ALLMULTI;
|
|
|
|
/* first, zot all the existing hash bits */
|
|
CSR_WRITE_4(sc, AL_MAR0, 0);
|
|
CSR_WRITE_4(sc, AL_MAR1, 0);
|
|
|
|
/* now program new ones */
|
|
for (ifma = ifp->if_multiaddrs.lh_first; ifma != NULL;
|
|
ifma = ifma->ifma_link.le_next) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
h = al_calchash(LLADDR((struct sockaddr_dl *)ifma->ifma_addr));
|
|
if (h < 32)
|
|
hashes[0] |= (1 << h);
|
|
else
|
|
hashes[1] |= (1 << (h - 32));
|
|
}
|
|
|
|
CSR_WRITE_4(sc, AL_MAR0, hashes[0]);
|
|
CSR_WRITE_4(sc, AL_MAR1, hashes[1]);
|
|
CSR_WRITE_4(sc, AL_NETCFG, rxfilt);
|
|
|
|
return;
|
|
}
|
|
|
|
static void al_reset(sc)
|
|
struct al_softc *sc;
|
|
{
|
|
register int i;
|
|
|
|
AL_SETBIT(sc, AL_BUSCTL, AL_BUSCTL_RESET);
|
|
|
|
for (i = 0; i < AL_TIMEOUT; i++) {
|
|
DELAY(10);
|
|
if (!(CSR_READ_4(sc, AL_BUSCTL) & AL_BUSCTL_RESET))
|
|
break;
|
|
}
|
|
#ifdef notdef
|
|
if (i == AL_TIMEOUT)
|
|
printf("al%d: reset never completed!\n", sc->al_unit);
|
|
#endif
|
|
CSR_WRITE_4(sc, AL_BUSCTL, AL_BUSCTL_ARBITRATION);
|
|
|
|
/* Wait a little while for the chip to get its brains in order. */
|
|
DELAY(1000);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Probe for an ADMtek chip. Check the PCI vendor and device
|
|
* IDs against our list and return a device name if we find a match.
|
|
*/
|
|
static int al_probe(dev)
|
|
device_t dev;
|
|
{
|
|
struct al_type *t;
|
|
|
|
t = al_devs;
|
|
|
|
while(t->al_name != NULL) {
|
|
if ((pci_get_vendor(dev) == t->al_vid) &&
|
|
(pci_get_device(dev) == t->al_did)) {
|
|
device_set_desc(dev, t->al_name);
|
|
return(0);
|
|
}
|
|
t++;
|
|
}
|
|
|
|
return(ENXIO);
|
|
}
|
|
|
|
/*
|
|
* Attach the interface. Allocate softc structures, do ifmedia
|
|
* setup and ethernet/BPF attach.
|
|
*/
|
|
static int al_attach(dev)
|
|
device_t dev;
|
|
{
|
|
int s;
|
|
u_char eaddr[ETHER_ADDR_LEN];
|
|
u_int32_t command;
|
|
struct al_softc *sc;
|
|
struct ifnet *ifp;
|
|
int unit, error = 0, rid;
|
|
|
|
s = splimp();
|
|
|
|
sc = device_get_softc(dev);
|
|
unit = device_get_unit(dev);
|
|
bzero(sc, sizeof(struct al_softc));
|
|
sc->al_did = pci_get_device(dev);
|
|
|
|
/*
|
|
* Handle power management nonsense.
|
|
*/
|
|
|
|
command = pci_read_config(dev, AL_PCI_CAPID, 4) & 0x000000FF;
|
|
if (command == 0x01) {
|
|
|
|
command = pci_read_config(dev, AL_PCI_PWRMGMTCTRL, 4);
|
|
if (command & AL_PSTATE_MASK) {
|
|
u_int32_t iobase, membase, irq;
|
|
|
|
/* Save important PCI config data. */
|
|
iobase = pci_read_config(dev, AL_PCI_LOIO, 4);
|
|
membase = pci_read_config(dev, AL_PCI_LOMEM, 4);
|
|
irq = pci_read_config(dev, AL_PCI_INTLINE, 4);
|
|
|
|
/* Reset the power state. */
|
|
printf("al%d: chip is in D%d power mode "
|
|
"-- setting to D0\n", unit, command & AL_PSTATE_MASK);
|
|
command &= 0xFFFFFFFC;
|
|
pci_write_config(dev, AL_PCI_PWRMGMTCTRL, command, 4);
|
|
|
|
/* Restore PCI config data. */
|
|
pci_write_config(dev, AL_PCI_LOIO, iobase, 4);
|
|
pci_write_config(dev, AL_PCI_LOMEM, membase, 4);
|
|
pci_write_config(dev, AL_PCI_INTLINE, irq, 4);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Map control/status registers.
|
|
*/
|
|
command = pci_read_config(dev, PCI_COMMAND_STATUS_REG, 4);
|
|
command |= (PCIM_CMD_PORTEN|PCIM_CMD_MEMEN|PCIM_CMD_BUSMASTEREN);
|
|
pci_write_config(dev, PCI_COMMAND_STATUS_REG, command, 4);
|
|
command = pci_read_config(dev, PCI_COMMAND_STATUS_REG, 4);
|
|
|
|
#ifdef AL_USEIOSPACE
|
|
if (!(command & PCIM_CMD_PORTEN)) {
|
|
printf("al%d: failed to enable I/O ports!\n", unit);
|
|
error = ENXIO;;
|
|
goto fail;
|
|
}
|
|
#else
|
|
if (!(command & PCIM_CMD_MEMEN)) {
|
|
printf("al%d: failed to enable memory mapping!\n", unit);
|
|
error = ENXIO;;
|
|
goto fail;
|
|
}
|
|
#endif
|
|
|
|
rid = AL_RID;
|
|
sc->al_res = bus_alloc_resource(dev, AL_RES, &rid,
|
|
0, ~0, 1, RF_ACTIVE);
|
|
|
|
if (sc->al_res == NULL) {
|
|
printf("al%d: couldn't map ports/memory\n", unit);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
sc->al_btag = rman_get_bustag(sc->al_res);
|
|
sc->al_bhandle = rman_get_bushandle(sc->al_res);
|
|
|
|
/* Allocate interrupt */
|
|
rid = 0;
|
|
sc->al_irq = bus_alloc_resource(dev, SYS_RES_IRQ, &rid, 0, ~0, 1,
|
|
RF_SHAREABLE | RF_ACTIVE);
|
|
|
|
if (sc->al_irq == NULL) {
|
|
printf("al%d: couldn't map interrupt\n", unit);
|
|
bus_release_resource(dev, AL_RES, AL_RID, sc->al_res);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
error = bus_setup_intr(dev, sc->al_irq, INTR_TYPE_NET,
|
|
al_intr, sc, &sc->al_intrhand);
|
|
|
|
if (error) {
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->al_res);
|
|
bus_release_resource(dev, AL_RES, AL_RID, sc->al_res);
|
|
printf("al%d: couldn't set up irq\n", unit);
|
|
goto fail;
|
|
}
|
|
|
|
/* Save the cache line size. */
|
|
sc->al_cachesize = pci_read_config(dev, AL_PCI_CACHELEN, 4) & 0xFF;
|
|
|
|
/* Reset the adapter. */
|
|
al_reset(sc);
|
|
|
|
/*
|
|
* Get station address from the EEPROM.
|
|
*/
|
|
al_read_eeprom(sc, (caddr_t)&eaddr, AL_EE_NODEADDR, 3, 0);
|
|
|
|
/*
|
|
* An ADMtek chip was detected. Inform the world.
|
|
*/
|
|
printf("al%d: Ethernet address: %6D\n", unit, eaddr, ":");
|
|
|
|
sc->al_unit = unit;
|
|
callout_handle_init(&sc->al_stat_ch);
|
|
bcopy(eaddr, (char *)&sc->arpcom.ac_enaddr, ETHER_ADDR_LEN);
|
|
|
|
sc->al_ldata = contigmalloc(sizeof(struct al_list_data), M_DEVBUF,
|
|
M_NOWAIT, 0x100000, 0xffffffff, PAGE_SIZE, 0);
|
|
|
|
if (sc->al_ldata == NULL) {
|
|
printf("al%d: no memory for list buffers!\n", unit);
|
|
bus_teardown_intr(dev, sc->al_irq, sc->al_intrhand);
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->al_irq);
|
|
bus_release_resource(dev, AL_RES, AL_RID, sc->al_res);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
bzero(sc->al_ldata, sizeof(struct al_list_data));
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
ifp->if_softc = sc;
|
|
ifp->if_unit = unit;
|
|
ifp->if_name = "al";
|
|
ifp->if_mtu = ETHERMTU;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = al_ioctl;
|
|
ifp->if_output = ether_output;
|
|
ifp->if_start = al_start;
|
|
ifp->if_watchdog = al_watchdog;
|
|
ifp->if_init = al_init;
|
|
ifp->if_baudrate = 10000000;
|
|
ifp->if_snd.ifq_maxlen = AL_TX_LIST_CNT - 1;
|
|
|
|
/*
|
|
* Do MII setup.
|
|
*/
|
|
if (mii_phy_probe(dev, &sc->al_miibus,
|
|
al_ifmedia_upd, al_ifmedia_sts)) {
|
|
printf("al%d: MII without any PHY!\n", sc->al_unit);
|
|
bus_teardown_intr(dev, sc->al_irq, sc->al_intrhand);
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->al_irq);
|
|
bus_release_resource(dev, AL_RES, AL_RID, sc->al_res);
|
|
error = ENXIO;
|
|
goto fail;
|
|
}
|
|
|
|
/*
|
|
* Call MI attach routines.
|
|
*/
|
|
if_attach(ifp);
|
|
ether_ifattach(ifp);
|
|
|
|
#if NBPF > 0
|
|
bpfattach(ifp, DLT_EN10MB, sizeof(struct ether_header));
|
|
#endif
|
|
|
|
fail:
|
|
splx(s);
|
|
return(error);
|
|
}
|
|
|
|
static int al_detach(dev)
|
|
device_t dev;
|
|
{
|
|
struct al_softc *sc;
|
|
struct ifnet *ifp;
|
|
int s;
|
|
|
|
s = splimp();
|
|
|
|
sc = device_get_softc(dev);
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
al_reset(sc);
|
|
al_stop(sc);
|
|
if_detach(ifp);
|
|
|
|
bus_generic_detach(dev);
|
|
device_delete_child(dev, sc->al_miibus);
|
|
|
|
bus_teardown_intr(dev, sc->al_irq, sc->al_intrhand);
|
|
bus_release_resource(dev, SYS_RES_IRQ, 0, sc->al_irq);
|
|
bus_release_resource(dev, AL_RES, AL_RID, sc->al_res);
|
|
|
|
contigfree(sc->al_ldata, sizeof(struct al_list_data), M_DEVBUF);
|
|
|
|
splx(s);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Initialize the transmit descriptors.
|
|
*/
|
|
static int al_list_tx_init(sc)
|
|
struct al_softc *sc;
|
|
{
|
|
struct al_chain_data *cd;
|
|
struct al_list_data *ld;
|
|
int i;
|
|
|
|
cd = &sc->al_cdata;
|
|
ld = sc->al_ldata;
|
|
for (i = 0; i < AL_TX_LIST_CNT; i++) {
|
|
if (i == (AL_TX_LIST_CNT - 1)) {
|
|
ld->al_tx_list[i].al_nextdesc =
|
|
&ld->al_tx_list[0];
|
|
ld->al_tx_list[i].al_next =
|
|
vtophys(&ld->al_tx_list[0]);
|
|
} else {
|
|
ld->al_tx_list[i].al_nextdesc =
|
|
&ld->al_tx_list[i + 1];
|
|
ld->al_tx_list[i].al_next =
|
|
vtophys(&ld->al_tx_list[i + 1]);
|
|
}
|
|
ld->al_tx_list[i].al_mbuf = NULL;
|
|
ld->al_tx_list[i].al_data = 0;
|
|
ld->al_tx_list[i].al_ctl = 0;
|
|
}
|
|
|
|
cd->al_tx_prod = cd->al_tx_cons = cd->al_tx_cnt = 0;
|
|
|
|
return(0);
|
|
}
|
|
|
|
|
|
/*
|
|
* Initialize the RX descriptors and allocate mbufs for them. Note that
|
|
* we arrange the descriptors in a closed ring, so that the last descriptor
|
|
* points back to the first.
|
|
*/
|
|
static int al_list_rx_init(sc)
|
|
struct al_softc *sc;
|
|
{
|
|
struct al_chain_data *cd;
|
|
struct al_list_data *ld;
|
|
int i;
|
|
|
|
cd = &sc->al_cdata;
|
|
ld = sc->al_ldata;
|
|
|
|
for (i = 0; i < AL_RX_LIST_CNT; i++) {
|
|
if (al_newbuf(sc, &ld->al_rx_list[i], NULL) == ENOBUFS)
|
|
return(ENOBUFS);
|
|
if (i == (AL_RX_LIST_CNT - 1)) {
|
|
ld->al_rx_list[i].al_nextdesc =
|
|
&ld->al_rx_list[0];
|
|
ld->al_rx_list[i].al_next =
|
|
vtophys(&ld->al_rx_list[0]);
|
|
} else {
|
|
ld->al_rx_list[i].al_nextdesc =
|
|
&ld->al_rx_list[i + 1];
|
|
ld->al_rx_list[i].al_next =
|
|
vtophys(&ld->al_rx_list[i + 1]);
|
|
}
|
|
}
|
|
|
|
cd->al_rx_prod = 0;
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Initialize an RX descriptor and attach an MBUF cluster.
|
|
*/
|
|
static int al_newbuf(sc, c, m)
|
|
struct al_softc *sc;
|
|
struct al_desc *c;
|
|
struct mbuf *m;
|
|
{
|
|
struct mbuf *m_new = NULL;
|
|
|
|
if (m == NULL) {
|
|
MGETHDR(m_new, M_DONTWAIT, MT_DATA);
|
|
if (m_new == NULL) {
|
|
printf("al%d: no memory for rx list "
|
|
"-- packet dropped!\n", sc->al_unit);
|
|
return(ENOBUFS);
|
|
}
|
|
|
|
MCLGET(m_new, M_DONTWAIT);
|
|
if (!(m_new->m_flags & M_EXT)) {
|
|
printf("al%d: no memory for rx list "
|
|
"-- packet dropped!\n", sc->al_unit);
|
|
m_freem(m_new);
|
|
return(ENOBUFS);
|
|
}
|
|
m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
|
|
} else {
|
|
m_new = m;
|
|
m_new->m_len = m_new->m_pkthdr.len = MCLBYTES;
|
|
m_new->m_data = m_new->m_ext.ext_buf;
|
|
}
|
|
|
|
m_adj(m_new, sizeof(u_int64_t));
|
|
|
|
c->al_mbuf = m_new;
|
|
c->al_data = vtophys(mtod(m_new, caddr_t));
|
|
c->al_ctl = AL_RXCTL_RLINK | AL_RXLEN;
|
|
c->al_status = AL_RXSTAT_OWN;
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* A frame has been uploaded: pass the resulting mbuf chain up to
|
|
* the higher level protocols.
|
|
*/
|
|
static void al_rxeof(sc)
|
|
struct al_softc *sc;
|
|
{
|
|
struct ether_header *eh;
|
|
struct mbuf *m;
|
|
struct ifnet *ifp;
|
|
struct al_desc *cur_rx;
|
|
int i, total_len = 0;
|
|
u_int32_t rxstat;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
i = sc->al_cdata.al_rx_prod;
|
|
|
|
while(!(sc->al_ldata->al_rx_list[i].al_status & AL_RXSTAT_OWN)) {
|
|
struct mbuf *m0 = NULL;
|
|
|
|
cur_rx = &sc->al_ldata->al_rx_list[i];
|
|
rxstat = cur_rx->al_status;
|
|
m = cur_rx->al_mbuf;
|
|
cur_rx->al_mbuf = NULL;
|
|
total_len = AL_RXBYTES(rxstat);
|
|
AL_INC(i, AL_RX_LIST_CNT);
|
|
|
|
/*
|
|
* If an error occurs, update stats, clear the
|
|
* status word and leave the mbuf cluster in place:
|
|
* it should simply get re-used next time this descriptor
|
|
* comes up in the ring.
|
|
*/
|
|
if (rxstat & AL_RXSTAT_RXERR) {
|
|
ifp->if_ierrors++;
|
|
if (rxstat & AL_RXSTAT_COLLSEEN)
|
|
ifp->if_collisions++;
|
|
al_newbuf(sc, cur_rx, m);
|
|
al_init(sc);
|
|
return;
|
|
}
|
|
|
|
/* No errors; receive the packet. */
|
|
total_len -= ETHER_CRC_LEN;
|
|
|
|
m0 = m_devget(mtod(m, char *) - ETHER_ALIGN,
|
|
total_len + ETHER_ALIGN, 0, ifp, NULL);
|
|
al_newbuf(sc, cur_rx, m);
|
|
if (m0 == NULL) {
|
|
ifp->if_ierrors++;
|
|
continue;
|
|
}
|
|
m_adj(m0, ETHER_ALIGN);
|
|
m = m0;
|
|
|
|
ifp->if_ipackets++;
|
|
eh = mtod(m, struct ether_header *);
|
|
#if NBPF > 0
|
|
/*
|
|
* Handle BPF listeners. Let the BPF user see the packet, but
|
|
* don't pass it up to the ether_input() layer unless it's
|
|
* a broadcast packet, multicast packet, matches our ethernet
|
|
* address or the interface is in promiscuous mode.
|
|
*/
|
|
if (ifp->if_bpf) {
|
|
bpf_mtap(ifp, m);
|
|
if (ifp->if_flags & IFF_PROMISC &&
|
|
(bcmp(eh->ether_dhost, sc->arpcom.ac_enaddr,
|
|
ETHER_ADDR_LEN) &&
|
|
(eh->ether_dhost[0] & 1) == 0)) {
|
|
m_freem(m);
|
|
continue;
|
|
}
|
|
}
|
|
#endif
|
|
/* Remove header from mbuf and pass it on. */
|
|
m_adj(m, sizeof(struct ether_header));
|
|
ether_input(ifp, eh, m);
|
|
}
|
|
|
|
sc->al_cdata.al_rx_prod = i;
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* A frame was downloaded to the chip. It's safe for us to clean up
|
|
* the list buffers.
|
|
*/
|
|
|
|
static void al_txeof(sc)
|
|
struct al_softc *sc;
|
|
{
|
|
struct al_desc *cur_tx = NULL;
|
|
struct ifnet *ifp;
|
|
u_int32_t idx;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
/* Clear the timeout timer. */
|
|
ifp->if_timer = 0;
|
|
|
|
/*
|
|
* Go through our tx list and free mbufs for those
|
|
* frames that have been transmitted.
|
|
*/
|
|
idx = sc->al_cdata.al_tx_cons;
|
|
while(idx != sc->al_cdata.al_tx_prod) {
|
|
u_int32_t txstat;
|
|
|
|
cur_tx = &sc->al_ldata->al_tx_list[idx];
|
|
txstat = cur_tx->al_status;
|
|
|
|
if (txstat & AL_TXSTAT_OWN)
|
|
break;
|
|
|
|
if (!(cur_tx->al_ctl & AL_TXCTL_LASTFRAG)) {
|
|
sc->al_cdata.al_tx_cnt--;
|
|
AL_INC(idx, AL_TX_LIST_CNT);
|
|
continue;
|
|
}
|
|
|
|
if (txstat & AL_TXSTAT_ERRSUM) {
|
|
ifp->if_oerrors++;
|
|
if (txstat & AL_TXSTAT_EXCESSCOLL)
|
|
ifp->if_collisions++;
|
|
if (txstat & AL_TXSTAT_LATECOLL)
|
|
ifp->if_collisions++;
|
|
al_init(sc);
|
|
return;
|
|
}
|
|
|
|
ifp->if_collisions += (txstat & AL_TXSTAT_COLLCNT) >> 3;
|
|
|
|
ifp->if_opackets++;
|
|
if (cur_tx->al_mbuf != NULL) {
|
|
m_freem(cur_tx->al_mbuf);
|
|
cur_tx->al_mbuf = NULL;
|
|
}
|
|
|
|
sc->al_cdata.al_tx_cnt--;
|
|
AL_INC(idx, AL_TX_LIST_CNT);
|
|
ifp->if_timer = 0;
|
|
}
|
|
|
|
sc->al_cdata.al_tx_cons = idx;
|
|
|
|
if (cur_tx != NULL)
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
|
|
return;
|
|
}
|
|
|
|
static void al_tick(xsc)
|
|
void *xsc;
|
|
{
|
|
struct al_softc *sc;
|
|
struct mii_data *mii;
|
|
int s;
|
|
|
|
s = splimp();
|
|
|
|
sc = xsc;
|
|
mii = device_get_softc(sc->al_miibus);
|
|
mii_tick(mii);
|
|
|
|
sc->al_stat_ch = timeout(al_tick, sc, hz);
|
|
|
|
splx(s);
|
|
|
|
return;
|
|
};
|
|
|
|
static void al_intr(arg)
|
|
void *arg;
|
|
{
|
|
struct al_softc *sc;
|
|
struct ifnet *ifp;
|
|
u_int32_t status;
|
|
|
|
|
|
sc = arg;
|
|
ifp = &sc->arpcom.ac_if;
|
|
|
|
/* Supress unwanted interrupts */
|
|
if (!(ifp->if_flags & IFF_UP)) {
|
|
al_stop(sc);
|
|
return;
|
|
}
|
|
|
|
/* Disable interrupts. */
|
|
CSR_WRITE_4(sc, AL_IMR, 0x00000000);
|
|
|
|
for (;;) {
|
|
status = CSR_READ_4(sc, AL_ISR);
|
|
if (status)
|
|
CSR_WRITE_4(sc, AL_ISR, status);
|
|
|
|
if ((status & AL_INTRS) == 0)
|
|
break;
|
|
|
|
if ((status & AL_ISR_TX_OK) ||
|
|
(status & AL_ISR_TX_NOBUF))
|
|
al_txeof(sc);
|
|
|
|
if (status & AL_ISR_TX_IDLE) {
|
|
al_txeof(sc);
|
|
if (sc->al_cdata.al_tx_cnt) {
|
|
AL_SETBIT(sc, AL_NETCFG, AL_NETCFG_TX_ON);
|
|
CSR_WRITE_4(sc, AL_TXSTART, 0xFFFFFFFF);
|
|
}
|
|
}
|
|
|
|
if (status & AL_ISR_TX_UNDERRUN) {
|
|
u_int32_t cfg;
|
|
cfg = CSR_READ_4(sc, AL_NETCFG);
|
|
if ((cfg & AL_NETCFG_TX_THRESH) == AL_TXTHRESH_160BYTES)
|
|
AL_SETBIT(sc, AL_NETCFG, AL_NETCFG_STORENFWD);
|
|
else
|
|
CSR_WRITE_4(sc, AL_NETCFG, cfg + 0x4000);
|
|
}
|
|
|
|
if (status & AL_ISR_RX_OK)
|
|
al_rxeof(sc);
|
|
|
|
if ((status & AL_ISR_RX_WATDOGTIMEO) ||
|
|
(status & AL_ISR_RX_IDLE) ||
|
|
(status & AL_ISR_RX_NOBUF)) {
|
|
al_rxeof(sc);
|
|
al_init(sc);
|
|
}
|
|
|
|
if (status & AL_ISR_BUS_ERR) {
|
|
al_reset(sc);
|
|
al_init(sc);
|
|
}
|
|
}
|
|
|
|
/* Re-enable interrupts. */
|
|
CSR_WRITE_4(sc, AL_IMR, AL_INTRS);
|
|
|
|
if (ifp->if_snd.ifq_head != NULL) {
|
|
al_start(ifp);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Encapsulate an mbuf chain in a descriptor by coupling the mbuf data
|
|
* pointers to the fragment pointers.
|
|
*/
|
|
static int al_encap(sc, m_head, txidx)
|
|
struct al_softc *sc;
|
|
struct mbuf *m_head;
|
|
u_int32_t *txidx;
|
|
{
|
|
struct al_desc *f = NULL;
|
|
struct mbuf *m;
|
|
int frag, cur, cnt = 0;
|
|
|
|
/*
|
|
* Start packing the mbufs in this chain into
|
|
* the fragment pointers. Stop when we run out
|
|
* of fragments or hit the end of the mbuf chain.
|
|
*/
|
|
m = m_head;
|
|
cur = frag = *txidx;
|
|
|
|
for (m = m_head; m != NULL; m = m->m_next) {
|
|
if (m->m_len != 0) {
|
|
#ifdef AL_TX_STALL_WAR
|
|
/*
|
|
* Work around some strange behavior in the Comet. For
|
|
* some reason, the transmitter will sometimes wedge if
|
|
* we queue up a descriptor chain that wraps from the end
|
|
* of the transmit list back to the beginning. If we reach
|
|
* the end of the list and still have more packets to queue,
|
|
* don't queue them now: end the transmit session here and
|
|
* then wait until it finishes before sending the other
|
|
* packets.
|
|
*/
|
|
if (*txidx != sc->al_cdata.al_tx_prod &&
|
|
frag == (AL_TX_LIST_CNT - 1))
|
|
return(ENOBUFS);
|
|
#endif
|
|
if ((AL_TX_LIST_CNT -
|
|
(sc->al_cdata.al_tx_cnt + cnt)) < 2)
|
|
return(ENOBUFS);
|
|
f = &sc->al_ldata->al_tx_list[frag];
|
|
f->al_ctl = AL_TXCTL_TLINK | m->m_len;
|
|
if (cnt == 0) {
|
|
f->al_status = 0;
|
|
f->al_ctl |= AL_TXCTL_FIRSTFRAG;
|
|
} else
|
|
f->al_status = AL_TXSTAT_OWN;
|
|
f->al_data = vtophys(mtod(m, vm_offset_t));
|
|
cur = frag;
|
|
AL_INC(frag, AL_TX_LIST_CNT);
|
|
cnt++;
|
|
}
|
|
}
|
|
|
|
if (m != NULL)
|
|
return(ENOBUFS);
|
|
|
|
sc->al_ldata->al_tx_list[cur].al_mbuf = m_head;
|
|
sc->al_ldata->al_tx_list[cur].al_ctl |=
|
|
AL_TXCTL_LASTFRAG|AL_TXCTL_FINT;
|
|
sc->al_ldata->al_tx_list[*txidx].al_status |= AL_TXSTAT_OWN;
|
|
sc->al_cdata.al_tx_cnt += cnt;
|
|
*txidx = frag;
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Main transmit routine. To avoid having to do mbuf copies, we put pointers
|
|
* to the mbuf data regions directly in the transmit lists. We also save a
|
|
* copy of the pointers since the transmit list fragment pointers are
|
|
* physical addresses.
|
|
*/
|
|
|
|
static void al_start(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct al_softc *sc;
|
|
struct mbuf *m_head = NULL;
|
|
u_int32_t idx;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
if (ifp->if_flags & IFF_OACTIVE)
|
|
return;
|
|
|
|
idx = sc->al_cdata.al_tx_prod;
|
|
|
|
while(sc->al_ldata->al_tx_list[idx].al_mbuf == NULL) {
|
|
IF_DEQUEUE(&ifp->if_snd, m_head);
|
|
if (m_head == NULL)
|
|
break;
|
|
|
|
if (al_encap(sc, m_head, &idx)) {
|
|
IF_PREPEND(&ifp->if_snd, m_head);
|
|
ifp->if_flags |= IFF_OACTIVE;
|
|
break;
|
|
}
|
|
|
|
#if NBPF > 0
|
|
/*
|
|
* If there's a BPF listener, bounce a copy of this frame
|
|
* to him.
|
|
*/
|
|
if (ifp->if_bpf)
|
|
bpf_mtap(ifp, m_head);
|
|
#endif
|
|
}
|
|
|
|
/* Transmit */
|
|
sc->al_cdata.al_tx_prod = idx;
|
|
CSR_WRITE_4(sc, AL_TXSTART, 0xFFFFFFFF);
|
|
|
|
/*
|
|
* Set a timeout in case the chip goes out to lunch.
|
|
*/
|
|
ifp->if_timer = 5;
|
|
|
|
return;
|
|
}
|
|
|
|
static void al_init(xsc)
|
|
void *xsc;
|
|
{
|
|
struct al_softc *sc = xsc;
|
|
struct ifnet *ifp = &sc->arpcom.ac_if;
|
|
struct mii_data *mii;
|
|
int s;
|
|
|
|
s = splimp();
|
|
|
|
mii = device_get_softc(sc->al_miibus);
|
|
|
|
/*
|
|
* Cancel pending I/O and free all RX/TX buffers.
|
|
*/
|
|
al_stop(sc);
|
|
al_reset(sc);
|
|
|
|
/*
|
|
* Set cache alignment and burst length.
|
|
*/
|
|
CSR_WRITE_4(sc, AL_BUSCTL, AL_BUSCTL_ARBITRATION);
|
|
AL_SETBIT(sc, AL_BUSCTL, AL_BURSTLEN_16LONG);
|
|
switch(sc->al_cachesize) {
|
|
case 32:
|
|
AL_SETBIT(sc, AL_BUSCTL, AL_CACHEALIGN_32LONG);
|
|
break;
|
|
case 16:
|
|
AL_SETBIT(sc, AL_BUSCTL, AL_CACHEALIGN_16LONG);
|
|
break;
|
|
case 8:
|
|
AL_SETBIT(sc, AL_BUSCTL, AL_CACHEALIGN_8LONG);
|
|
break;
|
|
case 0:
|
|
default:
|
|
AL_SETBIT(sc, AL_BUSCTL, AL_CACHEALIGN_NONE);
|
|
break;
|
|
}
|
|
|
|
AL_CLRBIT(sc, AL_NETCFG, AL_NETCFG_HEARTBEAT);
|
|
AL_CLRBIT(sc, AL_NETCFG, AL_NETCFG_STORENFWD);
|
|
|
|
AL_CLRBIT(sc, AL_NETCFG, AL_NETCFG_TX_THRESH);
|
|
|
|
if (IFM_SUBTYPE(sc->ifmedia.ifm_media) == IFM_10_T)
|
|
AL_SETBIT(sc, AL_NETCFG, AL_TXTHRESH_160BYTES);
|
|
else
|
|
AL_SETBIT(sc, AL_NETCFG, AL_TXTHRESH_72BYTES);
|
|
|
|
/* Init our MAC address */
|
|
CSR_WRITE_4(sc, AL_PAR0, *(u_int32_t *)(&sc->arpcom.ac_enaddr[0]));
|
|
CSR_WRITE_4(sc, AL_PAR1, *(u_int32_t *)(&sc->arpcom.ac_enaddr[4]));
|
|
|
|
/* Init circular RX list. */
|
|
if (al_list_rx_init(sc) == ENOBUFS) {
|
|
printf("al%d: initialization failed: no "
|
|
"memory for rx buffers\n", sc->al_unit);
|
|
al_stop(sc);
|
|
(void)splx(s);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Init tx descriptors.
|
|
*/
|
|
al_list_tx_init(sc);
|
|
|
|
/* If we want promiscuous mode, set the allframes bit. */
|
|
if (ifp->if_flags & IFF_PROMISC) {
|
|
AL_SETBIT(sc, AL_NETCFG, AL_NETCFG_RX_PROMISC);
|
|
} else {
|
|
AL_CLRBIT(sc, AL_NETCFG, AL_NETCFG_RX_PROMISC);
|
|
}
|
|
|
|
/*
|
|
* Load the multicast filter.
|
|
*/
|
|
al_setmulti(sc);
|
|
|
|
/*
|
|
* Load the address of the RX list.
|
|
*/
|
|
CSR_WRITE_4(sc, AL_RXADDR, vtophys(&sc->al_ldata->al_rx_list[0]));
|
|
CSR_WRITE_4(sc, AL_TXADDR, vtophys(&sc->al_ldata->al_tx_list[0]));
|
|
|
|
/*
|
|
* Enable interrupts.
|
|
*/
|
|
CSR_WRITE_4(sc, AL_IMR, AL_INTRS);
|
|
CSR_WRITE_4(sc, AL_ISR, 0xFFFFFFFF);
|
|
|
|
/* Enable receiver and transmitter. */
|
|
AL_SETBIT(sc, AL_NETCFG, AL_NETCFG_TX_ON|AL_NETCFG_RX_ON);
|
|
CSR_WRITE_4(sc, AL_RXSTART, 0xFFFFFFFF);
|
|
|
|
mii_mediachg(mii);
|
|
|
|
ifp->if_flags |= IFF_RUNNING;
|
|
ifp->if_flags &= ~IFF_OACTIVE;
|
|
|
|
(void)splx(s);
|
|
|
|
sc->al_stat_ch = timeout(al_tick, sc, hz);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Set media options.
|
|
*/
|
|
static int al_ifmedia_upd(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct al_softc *sc;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
if (ifp->if_flags & IFF_UP)
|
|
al_init(sc);
|
|
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Report current media status.
|
|
*/
|
|
static void al_ifmedia_sts(ifp, ifmr)
|
|
struct ifnet *ifp;
|
|
struct ifmediareq *ifmr;
|
|
{
|
|
struct al_softc *sc;
|
|
struct mii_data *mii;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
mii = device_get_softc(sc->al_miibus);
|
|
mii_pollstat(mii);
|
|
ifmr->ifm_active = mii->mii_media_active;
|
|
ifmr->ifm_status = mii->mii_media_status;
|
|
|
|
return;
|
|
}
|
|
|
|
static int al_ioctl(ifp, command, data)
|
|
struct ifnet *ifp;
|
|
u_long command;
|
|
caddr_t data;
|
|
{
|
|
struct al_softc *sc = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
struct mii_data *mii;
|
|
int s, error = 0;
|
|
|
|
s = splimp();
|
|
|
|
switch(command) {
|
|
case SIOCSIFADDR:
|
|
case SIOCGIFADDR:
|
|
case SIOCSIFMTU:
|
|
error = ether_ioctl(ifp, command, data);
|
|
break;
|
|
case SIOCSIFFLAGS:
|
|
if (ifp->if_flags & IFF_UP) {
|
|
al_init(sc);
|
|
} else {
|
|
if (ifp->if_flags & IFF_RUNNING)
|
|
al_stop(sc);
|
|
}
|
|
error = 0;
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
al_setmulti(sc);
|
|
error = 0;
|
|
break;
|
|
case SIOCGIFMEDIA:
|
|
case SIOCSIFMEDIA:
|
|
mii = device_get_softc(sc->al_miibus);
|
|
error = ifmedia_ioctl(ifp, ifr, &mii->mii_media, command);
|
|
break;
|
|
default:
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
|
|
(void)splx(s);
|
|
|
|
return(error);
|
|
}
|
|
|
|
static void al_watchdog(ifp)
|
|
struct ifnet *ifp;
|
|
{
|
|
struct al_softc *sc;
|
|
|
|
sc = ifp->if_softc;
|
|
|
|
ifp->if_oerrors++;
|
|
printf("al%d: watchdog timeout\n", sc->al_unit);
|
|
|
|
al_stop(sc);
|
|
al_reset(sc);
|
|
al_init(sc);
|
|
|
|
if (ifp->if_snd.ifq_head != NULL)
|
|
al_start(ifp);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Stop the adapter and free any mbufs allocated to the
|
|
* RX and TX lists.
|
|
*/
|
|
static void al_stop(sc)
|
|
struct al_softc *sc;
|
|
{
|
|
register int i;
|
|
struct ifnet *ifp;
|
|
|
|
ifp = &sc->arpcom.ac_if;
|
|
ifp->if_timer = 0;
|
|
|
|
untimeout(al_tick, sc, sc->al_stat_ch);
|
|
AL_CLRBIT(sc, AL_NETCFG, (AL_NETCFG_RX_ON|AL_NETCFG_TX_ON));
|
|
CSR_WRITE_4(sc, AL_IMR, 0x00000000);
|
|
CSR_WRITE_4(sc, AL_TXADDR, 0x00000000);
|
|
CSR_WRITE_4(sc, AL_RXADDR, 0x00000000);
|
|
|
|
/*
|
|
* Free data in the RX lists.
|
|
*/
|
|
for (i = 0; i < AL_RX_LIST_CNT; i++) {
|
|
if (sc->al_ldata->al_rx_list[i].al_mbuf != NULL) {
|
|
m_freem(sc->al_ldata->al_rx_list[i].al_mbuf);
|
|
sc->al_ldata->al_rx_list[i].al_mbuf = NULL;
|
|
}
|
|
}
|
|
bzero((char *)&sc->al_ldata->al_rx_list,
|
|
sizeof(sc->al_ldata->al_rx_list));
|
|
|
|
/*
|
|
* Free the TX list buffers.
|
|
*/
|
|
for (i = 0; i < AL_TX_LIST_CNT; i++) {
|
|
if (sc->al_ldata->al_tx_list[i].al_mbuf != NULL) {
|
|
m_freem(sc->al_ldata->al_tx_list[i].al_mbuf);
|
|
sc->al_ldata->al_tx_list[i].al_mbuf = NULL;
|
|
}
|
|
}
|
|
|
|
bzero((char *)&sc->al_ldata->al_tx_list,
|
|
sizeof(sc->al_ldata->al_tx_list));
|
|
|
|
ifp->if_flags &= ~(IFF_RUNNING | IFF_OACTIVE);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Stop all chip I/O so that the kernel's probe routines don't
|
|
* get confused by errant DMAs when rebooting.
|
|
*/
|
|
static void al_shutdown(dev)
|
|
device_t dev;
|
|
{
|
|
struct al_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
/*al_stop(sc); */
|
|
|
|
return;
|
|
}
|