freebsd-skq/sys/sparc64/pci/ofw_pcib_subr.c
Marius Strobl 00d3c930da Fix a bug introduced in rev. 1.5; for retrieving the device_t of the
parent bridge of a PCI-PCI bridge we need two device_get_parent().
2005-12-12 16:07:11 +00:00

142 lines
4.3 KiB
C

/*-
* Copyright (c) 2003 by Thomas Moestl <tmm@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT,
* INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
* (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
* USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_ofw_pci.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/bus.h>
#include <dev/ofw/ofw_bus.h>
#include <dev/ofw/ofw_pci.h>
#include <dev/ofw/openfirm.h>
#include <machine/bus.h>
#include <machine/ofw_bus.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcib_private.h>
#include "pcib_if.h"
#include <sparc64/pci/ofw_pci.h>
#include <sparc64/pci/ofw_pcib_subr.h>
void
ofw_pcib_gen_setup(device_t bridge)
{
struct ofw_pcib_gen_softc *sc;
u_int secbus;
sc = device_get_softc(bridge);
sc->ops_pcib_sc.dev = bridge;
sc->ops_node = ofw_bus_get_node(bridge);
KASSERT(sc->ops_node != 0,
("ofw_pcib_gen_setup: no ofw pci parent bus!"));
/*
* Setup the secondary bus number register, by allocating a new unique
* bus number for it; the firmware preset does not always seem to be
* correct.
*/
secbus = ofw_pci_alloc_busno(sc->ops_node);
pci_write_config(bridge, PCIR_PRIBUS_1, pci_get_bus(bridge), 1);
pci_write_config(bridge, PCIR_SECBUS_1, secbus, 1);
pci_write_config(bridge, PCIR_SUBBUS_1, secbus, 1);
sc->ops_pcib_sc.subbus = sc->ops_pcib_sc.secbus = secbus;
/* Notify parent bridges. */
OFW_PCI_ADJUST_BUSRANGE(device_get_parent(bridge), secbus);
ofw_bus_setup_iinfo(sc->ops_node, &sc->ops_iinfo,
sizeof(ofw_pci_intr_t));
}
int
ofw_pcib_gen_route_interrupt(device_t bridge, device_t dev, int intpin)
{
struct ofw_pcib_gen_softc *sc;
struct ofw_bus_iinfo *ii;
struct ofw_pci_register reg;
ofw_pci_intr_t pintr, mintr;
uint8_t maskbuf[sizeof(reg) + sizeof(pintr)];
sc = device_get_softc(bridge);
ii = &sc->ops_iinfo;
if (ii->opi_imapsz > 0) {
pintr = intpin;
if (ofw_bus_lookup_imap(ofw_bus_get_node(dev), ii, &reg,
sizeof(reg), &pintr, sizeof(pintr), &mintr, sizeof(mintr),
maskbuf)) {
/*
* If we've found a mapping, return it and don't map
* it again on higher levels - that causes problems
* in some cases, and never seems to be required.
*/
return (mintr);
}
} else if (intpin >= 1 && intpin <= 4) {
/*
* When an interrupt map is missing, we need to do the
* standard PCI swizzle and continue mapping at the parent.
*/
return (pcib_route_interrupt(bridge, dev, intpin));
}
/* Try at the parent. */
return (PCIB_ROUTE_INTERRUPT(device_get_parent(device_get_parent(
bridge)), bridge, intpin));
}
phandle_t
ofw_pcib_gen_get_node(device_t bridge, device_t dev)
{
struct ofw_pcib_gen_softc *sc;
sc = device_get_softc(bridge);
return (sc->ops_node);
}
void
ofw_pcib_gen_adjust_busrange(device_t bridge, u_int subbus)
{
struct ofw_pcib_gen_softc *sc;
sc = device_get_softc(bridge);
if (subbus > sc->ops_pcib_sc.subbus) {
#ifdef OFW_PCI_DEBUG
device_printf(bridge,
"adjusting secondary bus number from %d to %d\n",
sc->ops_pcib_sc.subbus, subbus);
#endif
pci_write_config(bridge, PCIR_SUBBUS_1, subbus, 1);
sc->ops_pcib_sc.subbus = subbus;
/* Notify parent bridges. */
OFW_PCI_ADJUST_BUSRANGE(device_get_parent(bridge), subbus);
}
}