6d123b64fd
better dynamic device mapping that didn't exit when we started this port. Remove it, since everything works w/o it.
74 lines
2.8 KiB
Plaintext
74 lines
2.8 KiB
Plaintext
# $FreeBSD$
|
|
arm/at91/at91_machdep.c standard
|
|
arm/at91/at91_aic.c standard
|
|
arm/at91/at91.c standard
|
|
arm/at91/at91_aic.c standard
|
|
arm/at91/at91_pio.c standard
|
|
arm/at91/at91_pmc.c standard
|
|
arm/at91/at91_smc.c standard
|
|
arm/at91/at91_cfata.c optional at91_cfata
|
|
arm/at91/at91_common.c optional fdt
|
|
arm/at91/at91_mci.c optional at91_mci
|
|
arm/at91/at91_ohci.c optional ohci ! fdt
|
|
arm/at91/at91_ohci_fdt.c optional ohci fdt
|
|
arm/at91/at91_pinctrl.c optional fdt fdt_pinctrl
|
|
arm/at91/at91_pit.c optional at91sam9
|
|
arm/at91/at91_reset.S optional at91sam9
|
|
arm/at91/at91_rst.c optional at91sam9
|
|
arm/at91/at91_rtc.c optional at91_rtc
|
|
arm/at91/at91_sdramc.c optional fdt
|
|
arm/at91/at91_shdwc.c optional fdt
|
|
arm/at91/at91_spi.c optional at91_spi \
|
|
dependency "spibus_if.h"
|
|
arm/at91/at91_ssc.c optional at91_ssc
|
|
arm/at91/at91_st.c optional at91rm9200
|
|
arm/at91/at91_tcb.c optional fdt
|
|
arm/at91/at91_twi.c optional at91_twi
|
|
arm/at91/at91_wdt.c optional at91_wdt
|
|
arm/at91/if_ate.c optional ate
|
|
arm/at91/if_macb.c optional macb
|
|
arm/at91/uart_bus_at91usart.c optional uart ! fdt
|
|
arm/at91/uart_cpu_at91usart.c optional uart ! fdt
|
|
arm/at91/uart_dev_at91usart.c optional uart
|
|
dev/uart/uart_cpu_fdt.c optional uart fdt
|
|
dev/nand/nfc_at91.c optional nand
|
|
#
|
|
# All the "systems on a chip" we support
|
|
#
|
|
arm/at91/at91soc.c standard
|
|
arm/at91/at91rm9200.c optional at91rm9200
|
|
arm/at91/at91rm9200_devices.c optional at91rm9200
|
|
arm/at91/at91sam9260.c optional at91sam9260
|
|
arm/at91/at91sam9g20.c optional at91sam9g20
|
|
arm/at91/at91sam9g45.c optional at91sam9g45
|
|
arm/at91/at91sam9x5.c optional at91sam9x5
|
|
#
|
|
# All the boards we support
|
|
#
|
|
arm/at91/board_bwct.c optional at91_board_bwct
|
|
arm/at91/board_eb9200.c optional at91_board_eb9200
|
|
arm/at91/board_ethernut5.c optional at91_board_ethernut5
|
|
arm/at91/board_hl200.c optional at91_board_hl200
|
|
arm/at91/board_hl201.c optional at91_board_hl201
|
|
arm/at91/board_kb920x.c optional at91_board_kb920x
|
|
arm/at91/board_qila9g20.c optional at91_board_qila9g20
|
|
arm/at91/board_sam9260ek.c optional at91_board_sam9260ek
|
|
arm/at91/board_sam9g20ek.c optional at91_board_sam9g20ek
|
|
arm/at91/board_sam9x25ek.c optional at91_board_sam9x25ek
|
|
arm/at91/board_sn9g45.c optional at91_board_sn9g45
|
|
arm/at91/board_tsc4370.c optional at91_board_tsc4370
|
|
#
|
|
# usb
|
|
#
|
|
# XXX these should likely move to sys/at91 as well. They are also
|
|
# XXX slightly inconsistent with sys/conf/files and that ambiguity
|
|
# XXX should be fixed when this can be tested on real kit. The dci
|
|
# XXX code has hard-coded GPIO pins which is almost certainly wrong.
|
|
dev/usb/controller/at91dci.c optional at91_dci
|
|
dev/usb/controller/at91dci_atmelarm.c optional at91_dci ! fdt
|
|
dev/usb/controller/at91dci_fdt.c optional at91_dci fdt
|
|
|
|
# We need this for both FDT and !FDT since we use arm_base_bs_ta
|
|
# files.arm picks it up for FDT.
|
|
arm/arm/bus_space_base.c optional !fdt
|