fdf2456eee
for the AR9280 based NICs if it's actually enabled. Some of the OLC code was erroneously called during setup and calibration. This may have caused some incorrect behaviour.
409 lines
13 KiB
C
409 lines
13 KiB
C
/*
|
|
* Copyright (c) 2011 Adrian Chadd, Xenion Pty Ltd.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
#include "opt_ah.h"
|
|
|
|
#include "ah.h"
|
|
#include "ah_internal.h"
|
|
|
|
#include "ah_eeprom_v14.h"
|
|
|
|
#include "ar9002/ar9280.h"
|
|
#include "ar5416/ar5416reg.h"
|
|
#include "ar5416/ar5416phy.h"
|
|
#include "ar9002/ar9002phy.h"
|
|
|
|
#include "ar9002/ar9280_olc.h"
|
|
|
|
void
|
|
ar9280olcInit(struct ath_hal *ah)
|
|
{
|
|
uint32_t i;
|
|
|
|
/* Only do OLC if it's enabled for this chipset */
|
|
if (! ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL))
|
|
return;
|
|
|
|
HALDEBUG(ah, HAL_DEBUG_RESET, "%s: Setting up TX gain tables.\n", __func__);
|
|
|
|
for (i = 0; i < AR9280_TX_GAIN_TABLE_SIZE; i++)
|
|
AH9280(ah)->originalGain[i] = MS(OS_REG_READ(ah,
|
|
AR_PHY_TX_GAIN_TBL1 + i * 4), AR_PHY_TX_GAIN);
|
|
|
|
AH9280(ah)->PDADCdelta = 0;
|
|
}
|
|
|
|
void
|
|
ar9280olcGetTxGainIndex(struct ath_hal *ah,
|
|
const struct ieee80211_channel *chan,
|
|
struct calDataPerFreqOpLoop *rawDatasetOpLoop,
|
|
uint8_t *calChans, uint16_t availPiers, uint8_t *pwr, uint8_t *pcdacIdx)
|
|
{
|
|
uint8_t pcdac, i = 0;
|
|
uint16_t idxL = 0, idxR = 0, numPiers;
|
|
HAL_BOOL match;
|
|
CHAN_CENTERS centers;
|
|
|
|
ar5416GetChannelCenters(ah, chan, ¢ers);
|
|
|
|
for (numPiers = 0; numPiers < availPiers; numPiers++)
|
|
if (calChans[numPiers] == AR5416_BCHAN_UNUSED)
|
|
break;
|
|
|
|
match = ath_ee_getLowerUpperIndex((uint8_t)FREQ2FBIN(centers.synth_center,
|
|
IEEE80211_IS_CHAN_2GHZ(chan)), calChans, numPiers,
|
|
&idxL, &idxR);
|
|
if (match) {
|
|
pcdac = rawDatasetOpLoop[idxL].pcdac[0][0];
|
|
*pwr = rawDatasetOpLoop[idxL].pwrPdg[0][0];
|
|
} else {
|
|
pcdac = rawDatasetOpLoop[idxR].pcdac[0][0];
|
|
*pwr = (rawDatasetOpLoop[idxL].pwrPdg[0][0] +
|
|
rawDatasetOpLoop[idxR].pwrPdg[0][0])/2;
|
|
}
|
|
while (pcdac > AH9280(ah)->originalGain[i] &&
|
|
i < (AR9280_TX_GAIN_TABLE_SIZE - 1))
|
|
i++;
|
|
|
|
*pcdacIdx = i;
|
|
}
|
|
|
|
/*
|
|
* XXX txPower here is likely not the target txPower in the traditional
|
|
* XXX sense, but is set by a call to ar9280olcGetTxGainIndex().
|
|
* XXX Thus, be careful if you're trying to use this routine yourself.
|
|
*/
|
|
void
|
|
ar9280olcGetPDADCs(struct ath_hal *ah, uint32_t initTxGain, int txPower,
|
|
uint8_t *pPDADCValues)
|
|
{
|
|
uint32_t i;
|
|
uint32_t offset;
|
|
|
|
OS_REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL6_0, AR_PHY_TX_PWRCTRL_ERR_EST_MODE, 3);
|
|
OS_REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL6_1, AR_PHY_TX_PWRCTRL_ERR_EST_MODE, 3);
|
|
|
|
OS_REG_RMW_FIELD(ah, AR_PHY_TX_PWRCTRL7, AR_PHY_TX_PWRCTRL_INIT_TX_GAIN, initTxGain);
|
|
|
|
offset = txPower;
|
|
for (i = 0; i < AR5416_NUM_PDADC_VALUES; i++)
|
|
if (i < offset)
|
|
pPDADCValues[i] = 0x0;
|
|
else
|
|
pPDADCValues[i] = 0xFF;
|
|
}
|
|
|
|
/*
|
|
* Run temperature compensation calibration.
|
|
*
|
|
* The TX gain table is adjusted depending upon the difference
|
|
* between the initial PDADC value and the currently read
|
|
* average TX power sample value. This value is only valid if
|
|
* frames have been transmitted, so currPDADC will be 0 if
|
|
* no frames have yet been transmitted.
|
|
*/
|
|
void
|
|
ar9280olcTemperatureCompensation(struct ath_hal *ah)
|
|
{
|
|
uint32_t rddata, i;
|
|
int delta, currPDADC, regval;
|
|
uint8_t hpwr_5g = 0;
|
|
|
|
if (! ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL))
|
|
return;
|
|
|
|
rddata = OS_REG_READ(ah, AR_PHY_TX_PWRCTRL4);
|
|
currPDADC = MS(rddata, AR_PHY_TX_PWRCTRL_PD_AVG_OUT);
|
|
|
|
HALDEBUG(ah, HAL_DEBUG_PERCAL,
|
|
"%s: called: initPDADC=%d, currPDADC=%d\n",
|
|
__func__, AH5416(ah)->initPDADC, currPDADC);
|
|
|
|
if (AH5416(ah)->initPDADC == 0 || currPDADC == 0)
|
|
return;
|
|
|
|
(void) (ath_hal_eepromGet(ah, AR_EEP_DAC_HPWR_5G, &hpwr_5g));
|
|
|
|
if (hpwr_5g)
|
|
delta = (currPDADC - AH5416(ah)->initPDADC + 4) / 8;
|
|
else
|
|
delta = (currPDADC - AH5416(ah)->initPDADC + 5) / 10;
|
|
|
|
HALDEBUG(ah, HAL_DEBUG_PERCAL, "%s: delta=%d, PDADCdelta=%d\n",
|
|
__func__, delta, AH9280(ah)->PDADCdelta);
|
|
|
|
if (delta != AH9280(ah)->PDADCdelta) {
|
|
AH9280(ah)->PDADCdelta = delta;
|
|
for (i = 1; i < AR9280_TX_GAIN_TABLE_SIZE; i++) {
|
|
regval = AH9280(ah)->originalGain[i] - delta;
|
|
if (regval < 0)
|
|
regval = 0;
|
|
|
|
OS_REG_RMW_FIELD(ah,
|
|
AR_PHY_TX_GAIN_TBL1 + i * 4,
|
|
AR_PHY_TX_GAIN, regval);
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
static int16_t
|
|
ar9280ChangeGainBoundarySettings(struct ath_hal *ah, uint16_t *gb,
|
|
uint16_t numXpdGain, uint16_t pdGainOverlap_t2, int8_t pwr_table_offset,
|
|
int16_t *diff)
|
|
{
|
|
uint16_t k;
|
|
|
|
/* Prior to writing the boundaries or the pdadc vs. power table
|
|
* into the chip registers the default starting point on the pdadc
|
|
* vs. power table needs to be checked and the curve boundaries
|
|
* adjusted accordingly
|
|
*/
|
|
if (AR_SREV_MERLIN_20_OR_LATER(ah)) {
|
|
uint16_t gb_limit;
|
|
|
|
if (AR5416_PWR_TABLE_OFFSET_DB != pwr_table_offset) {
|
|
/* get the difference in dB */
|
|
*diff = (uint16_t)(pwr_table_offset - AR5416_PWR_TABLE_OFFSET_DB);
|
|
/* get the number of half dB steps */
|
|
*diff *= 2;
|
|
/* change the original gain boundary settings
|
|
* by the number of half dB steps
|
|
*/
|
|
for (k = 0; k < numXpdGain; k++)
|
|
gb[k] = (uint16_t)(gb[k] - *diff);
|
|
}
|
|
/* Because of a hardware limitation, ensure the gain boundary
|
|
* is not larger than (63 - overlap)
|
|
*/
|
|
gb_limit = (uint16_t)(AR5416_MAX_RATE_POWER - pdGainOverlap_t2);
|
|
|
|
for (k = 0; k < numXpdGain; k++)
|
|
gb[k] = (uint16_t)min(gb_limit, gb[k]);
|
|
}
|
|
|
|
return *diff;
|
|
}
|
|
|
|
static void
|
|
ar9280AdjustPDADCValues(struct ath_hal *ah, int8_t pwr_table_offset,
|
|
int16_t diff, uint8_t *pdadcValues)
|
|
{
|
|
#define NUM_PDADC(diff) (AR5416_NUM_PDADC_VALUES - diff)
|
|
uint16_t k;
|
|
|
|
/* If this is a board that has a pwrTableOffset that differs from
|
|
* the default AR5416_PWR_TABLE_OFFSET_DB then the start of the
|
|
* pdadc vs pwr table needs to be adjusted prior to writing to the
|
|
* chip.
|
|
*/
|
|
if (AR_SREV_MERLIN_20_OR_LATER(ah)) {
|
|
if (AR5416_PWR_TABLE_OFFSET_DB != pwr_table_offset) {
|
|
/* shift the table to start at the new offset */
|
|
for (k = 0; k < (uint16_t)NUM_PDADC(diff); k++ ) {
|
|
pdadcValues[k] = pdadcValues[k + diff];
|
|
}
|
|
|
|
/* fill the back of the table */
|
|
for (k = (uint16_t)NUM_PDADC(diff); k < NUM_PDADC(0); k++) {
|
|
pdadcValues[k] = pdadcValues[NUM_PDADC(diff)];
|
|
}
|
|
}
|
|
}
|
|
#undef NUM_PDADC
|
|
}
|
|
/*
|
|
* This effectively disables the gain boundaries leaving it
|
|
* to the open-loop TX power control.
|
|
*/
|
|
static void
|
|
ar9280SetGainBoundariesOpenLoop(struct ath_hal *ah, int i,
|
|
uint16_t pdGainOverlap_t2, uint16_t gainBoundaries[])
|
|
{
|
|
int regChainOffset;
|
|
|
|
regChainOffset = ar5416GetRegChainOffset(ah, i);
|
|
|
|
/* These are unused for OLC */
|
|
(void) pdGainOverlap_t2;
|
|
(void) gainBoundaries;
|
|
|
|
HALDEBUG(ah, HAL_DEBUG_EEPROM, "%s: chain %d: writing closed loop values\n",
|
|
__func__, i);
|
|
|
|
OS_REG_WRITE(ah, AR_PHY_TPCRG5 + regChainOffset,
|
|
SM(0x6, AR_PHY_TPCRG5_PD_GAIN_OVERLAP) |
|
|
SM(0x38, AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_1) |
|
|
SM(0x38, AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_2) |
|
|
SM(0x38, AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_3) |
|
|
SM(0x38, AR_PHY_TPCRG5_PD_GAIN_BOUNDARY_4));
|
|
}
|
|
|
|
/* Eeprom versioning macros. Returns true if the version is equal or newer than the ver specified */
|
|
/* XXX shouldn't be here! */
|
|
#define EEP_MINOR(_ah) \
|
|
(AH_PRIVATE(_ah)->ah_eeversion & AR5416_EEP_VER_MINOR_MASK)
|
|
#define IS_EEP_MINOR_V2(_ah) (EEP_MINOR(_ah) >= AR5416_EEP_MINOR_VER_2)
|
|
#define IS_EEP_MINOR_V3(_ah) (EEP_MINOR(_ah) >= AR5416_EEP_MINOR_VER_3)
|
|
|
|
/**************************************************************
|
|
* ar9280SetPowerCalTable
|
|
*
|
|
* Pull the PDADC piers from cal data and interpolate them across the given
|
|
* points as well as from the nearest pier(s) to get a power detector
|
|
* linear voltage to power level table.
|
|
*
|
|
* Handle OLC for Merlin where required.
|
|
*/
|
|
HAL_BOOL
|
|
ar9280SetPowerCalTable(struct ath_hal *ah, struct ar5416eeprom *pEepData,
|
|
const struct ieee80211_channel *chan, int16_t *pTxPowerIndexOffset)
|
|
{
|
|
CAL_DATA_PER_FREQ *pRawDataset;
|
|
uint8_t *pCalBChans = AH_NULL;
|
|
uint16_t pdGainOverlap_t2;
|
|
static uint8_t pdadcValues[AR5416_NUM_PDADC_VALUES];
|
|
uint16_t gainBoundaries[AR5416_PD_GAINS_IN_MASK];
|
|
uint16_t numPiers, i;
|
|
int16_t tMinCalPower;
|
|
uint16_t numXpdGain, xpdMask;
|
|
uint16_t xpdGainValues[AR5416_NUM_PD_GAINS];
|
|
uint32_t regChainOffset;
|
|
int8_t pwr_table_offset;
|
|
|
|
OS_MEMZERO(xpdGainValues, sizeof(xpdGainValues));
|
|
|
|
xpdMask = pEepData->modalHeader[IEEE80211_IS_CHAN_2GHZ(chan)].xpdGain;
|
|
|
|
(void) ath_hal_eepromGet(ah, AR_EEP_PWR_TABLE_OFFSET, &pwr_table_offset);
|
|
|
|
|
|
if (IS_EEP_MINOR_V2(ah)) {
|
|
pdGainOverlap_t2 = pEepData->modalHeader[IEEE80211_IS_CHAN_2GHZ(chan)].pdGainOverlap;
|
|
} else {
|
|
pdGainOverlap_t2 = (uint16_t)(MS(OS_REG_READ(ah, AR_PHY_TPCRG5), AR_PHY_TPCRG5_PD_GAIN_OVERLAP));
|
|
}
|
|
|
|
if (IEEE80211_IS_CHAN_2GHZ(chan)) {
|
|
pCalBChans = pEepData->calFreqPier2G;
|
|
numPiers = AR5416_NUM_2G_CAL_PIERS;
|
|
} else {
|
|
pCalBChans = pEepData->calFreqPier5G;
|
|
numPiers = AR5416_NUM_5G_CAL_PIERS;
|
|
}
|
|
|
|
/* If OLC is being done, set the init PDADC value appropriately */
|
|
if (IEEE80211_IS_CHAN_2GHZ(chan) && AR_SREV_MERLIN_20_OR_LATER(ah) &&
|
|
ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL)) {
|
|
struct calDataPerFreq *pRawDataset = pEepData->calPierData2G[0];
|
|
AH5416(ah)->initPDADC = ((struct calDataPerFreqOpLoop *) pRawDataset)->vpdPdg[0][0];
|
|
} else {
|
|
/*
|
|
* XXX ath9k doesn't clear this for 5ghz mode if
|
|
* it were set in 2ghz mode before!
|
|
* The Merlin OLC temperature compensation code
|
|
* uses this to calculate the PDADC delta during
|
|
* calibration ; 0 here effectively stops the
|
|
* temperature compensation calibration from
|
|
* occuring.
|
|
*/
|
|
AH5416(ah)->initPDADC = 0;
|
|
}
|
|
|
|
/* Calculate the value of xpdgains from the xpdGain Mask */
|
|
numXpdGain = ar5416GetXpdGainValues(ah, xpdMask, xpdGainValues);
|
|
|
|
/* Write the detector gain biases and their number */
|
|
ar5416WriteDetectorGainBiases(ah, numXpdGain, xpdGainValues);
|
|
|
|
for (i = 0; i < AR5416_MAX_CHAINS; i++) {
|
|
regChainOffset = ar5416GetRegChainOffset(ah, i);
|
|
if (pEepData->baseEepHeader.txMask & (1 << i)) {
|
|
uint16_t diff;
|
|
|
|
if (IEEE80211_IS_CHAN_2GHZ(chan)) {
|
|
pRawDataset = pEepData->calPierData2G[i];
|
|
} else {
|
|
pRawDataset = pEepData->calPierData5G[i];
|
|
}
|
|
|
|
/* Fetch the gain boundaries and the PDADC values */
|
|
if (AR_SREV_MERLIN_20_OR_LATER(ah) &&
|
|
ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL)) {
|
|
uint8_t pcdacIdx;
|
|
uint8_t txPower;
|
|
|
|
ar9280olcGetTxGainIndex(ah, chan,
|
|
(struct calDataPerFreqOpLoop *) pRawDataset,
|
|
pCalBChans, numPiers, &txPower, &pcdacIdx);
|
|
ar9280olcGetPDADCs(ah, pcdacIdx, txPower / 2, pdadcValues);
|
|
} else {
|
|
ar5416GetGainBoundariesAndPdadcs(ah, chan,
|
|
pRawDataset, pCalBChans, numPiers,
|
|
pdGainOverlap_t2, &tMinCalPower,
|
|
gainBoundaries, pdadcValues, numXpdGain);
|
|
}
|
|
|
|
/*
|
|
* Prior to writing the boundaries or the pdadc vs. power table
|
|
* into the chip registers the default starting point on the pdadc
|
|
* vs. power table needs to be checked and the curve boundaries
|
|
* adjusted accordingly
|
|
*/
|
|
diff = ar9280ChangeGainBoundarySettings(ah,
|
|
gainBoundaries, numXpdGain, pdGainOverlap_t2,
|
|
pwr_table_offset, &diff);
|
|
|
|
if ((i == 0) || AR_SREV_5416_V20_OR_LATER(ah)) {
|
|
/* Set gain boundaries for either open- or closed-loop TPC */
|
|
if (AR_SREV_MERLIN_20_OR_LATER(ah) &&
|
|
ath_hal_eepromGetFlag(ah, AR_EEP_OL_PWRCTRL))
|
|
ar9280SetGainBoundariesOpenLoop(ah,
|
|
i, pdGainOverlap_t2,
|
|
gainBoundaries);
|
|
else
|
|
ar5416SetGainBoundariesClosedLoop(ah,
|
|
i, pdGainOverlap_t2,
|
|
gainBoundaries);
|
|
}
|
|
|
|
/*
|
|
* If this is a board that has a pwrTableOffset that differs from
|
|
* the default AR5416_PWR_TABLE_OFFSET_DB then the start of the
|
|
* pdadc vs pwr table needs to be adjusted prior to writing to the
|
|
* chip.
|
|
*/
|
|
ar9280AdjustPDADCValues(ah, pwr_table_offset, diff, pdadcValues);
|
|
|
|
/* Write the power values into the baseband power table */
|
|
ar5416WritePdadcValues(ah, i, pdadcValues);
|
|
}
|
|
}
|
|
*pTxPowerIndexOffset = 0;
|
|
|
|
return AH_TRUE;
|
|
}
|