freebsd-skq/sys/arm/at91/at91_smc.h
2014-01-19 17:45:13 +00:00

117 lines
3.5 KiB
C

/*-
* Copyright (c) 2014 M. Warner Losh. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/* $FreeBSD$ */
#ifndef ARM_AT91_AT91_SMC_H
#define ARM_AT91_AT91_SMC_H
/* Registers */
#define SMC_SETUP 0x00
#define SMC_PULSE 0x04
#define SMC_CYCLE 0x08
#define SMC_MODE 0x0C
#define SMC_CS_OFF(cs) (0x10 * (cs))
/* Setup */
#define SMC_SETUP_NCS_RD_SETUP(x) ((x) << 24)
#define SMC_SETUP_NRD_SETUP(x) ((x) << 16)
#define SMC_SETUP_NCS_WR_SETUP(x) ((x) << 8)
#define SMC_SETUP_NWE_SETUP(x) (x)
/* Pulse */
#define SMC_PULSE_NCS_RD_PULSE(x) ((x) << 24)
#define SMC_PULSE_NRD_PULSE(x) ((x) << 16)
#define SMC_PULSE_NCS_WR_PULSE(x) ((x) << 8)
#define SMC_PULSE_NWE_PULSE(x) (x)
/* Cycle */
#define SMC_CYCLE_NRD_CYCLE(x) ((x) << 16)
#define SMC_CYCLE_NWE_CYCLE(x) (x)
/* Mode */
#define SMC_MODE_READ (1 << 0)
#define SMC_MODE_WRITE (1 << 1)
#define SMC_MODE_EXNW_DISABLED (0 << 4)
#define SMC_MODE_EXNW_FROZEN_MODE (2 << 4)
#define SMC_MODE_EXNW_READY_MODE (3 << 4)
#define SMC_MODE_BAT (1 << 8)
#define SMC_MODE_DBW_8BIT (0 << 12)
#define SMC_MODE_DBW_16BIT (1 << 12)
#define SMC_MODE_DBW_32_BIT (2 << 12)
#define SMC_MODE_TDF_CYCLES(x) ((x) << 16)
#define SMC_MODE_TDF_MODE (1 << 20)
#define SMC_MODE_PMEN (1 << 24)
#define SMC_PS_4BYTE (0 << 28)
#define SMC_PS_8BYTE (1 << 28)
#define SMC_PS_16BYTE (2 << 28)
#define SMC_PS_32BYTE (3 << 28)
/*
* structure to ease init. See the SMC chapter in the datasheet for
* the appropriate SoC you are using for details.
*/
struct at91_smc_init
{
/* Setup register */
uint8_t ncs_rd_setup;
uint8_t nrd_setup;
uint8_t ncs_wr_setup;
uint8_t nwe_setup;
/* Pulse register */
uint8_t ncs_rd_pulse;
uint8_t nrd_pulse;
uint8_t ncs_wr_pulse;
uint8_t nwe_pulse;
/* Cycle register */
uint16_t nrd_cycle;
uint16_t nwe_cycle;
/* Mode register */
uint8_t mode; /* Combo of READ/WRITE/EXNW fields */
uint8_t bat;
uint8_t dwb;
uint8_t tdf_cycles;
uint8_t tdf_mode;
uint8_t pmen;
uint8_t ps;
};
/*
* Convenience routine to fill in SMC registers for a given chip select.
*/
void at91_smc_setup(int id, int cs, const struct at91_smc_init *smc);
/*
* Disable/Enable different External Bus Interfaces (EBI)
*/
void at91_ebi_enable(int cs);
void at91_ebi_disable(int cs);
#endif /* ARM_AT91_AT91_SMC_H */