5b7d331b4d
- Rip out all the static softc stuff and do softc allocation the right way. - Rewrite most of the ISA code so that it provides a DEVICE_IDENTIFY method to enumerate all non-PnP ISA devices. This has the following consequences: - No 'ep' devices may be hardwired. - All hardwired devices will probably be detected twice. By hardwired I mean: device ep0 at isa? port 0x300 irq 10 - 'ep' devices are ordered by bus, slot, and then MAC address. - Make 3c509B cards work in PnP mode. Yes, they really work. - Convert over to using ifmedia for media selection. No more of this lame 'linkX' stuff. - Consolidate a lot of duplicated code. - Make a stab at not breaking MII based PCCARD devices. I doubt that the PCCARD stuff works any more than it did before my changes but theres hope. My PCCARD hardware should arrive in a week or so. - Retreive the media settings from the card EEPROM rather than guessing. I've got a 3c509-TPO that thinks its got an AUI port and if others can report similar problems I'll write a bit of clever code that will fix this but right now it works correctly on all but 1 card. - Clean up a few things and make some cosmetic changes. - Add myself as the MAINTAINER since nobody else wants to. I'm in the best position to do this as I've got an example of most of the cards: EISA 3c579 bnc/aui MCA 3c529 tp/aui ISA 3c509 tpo ISA-PnP 3c509B combo If someone wants to send me a any cards I don't have I'd appriciate it. Also welcome are 3c59x boards since I'll be folding if_vx and if_ep at some point.
317 lines
8.2 KiB
C
317 lines
8.2 KiB
C
/*
|
|
* Copyright (c) 1994 Herb Peyerl <hpeyerl@novatel.ca>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Herb Peyerl.
|
|
* 4. The name of Herb Peyerl may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/socket.h>
|
|
|
|
#include <sys/module.h>
|
|
#include <sys/bus.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/rman.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <machine/clock.h>
|
|
|
|
#include <isa/isavar.h>
|
|
#include <isa/pnpvar.h>
|
|
|
|
#include <dev/ep/if_epreg.h>
|
|
#include <dev/ep/if_epvar.h>
|
|
#include <i386/isa/elink.h>
|
|
|
|
static int get_eeprom_data (int, int);
|
|
|
|
static void ep_isa_identify (driver_t *, device_t);
|
|
static int ep_isa_probe (device_t);
|
|
static int ep_isa_attach (device_t);
|
|
|
|
struct isa_ident {
|
|
u_int32_t id;
|
|
char * name;
|
|
};
|
|
const char * ep_isa_match_id (u_int32_t, struct isa_ident *);
|
|
|
|
#define ISA_ID_3C509_TP 0x506d5090
|
|
#define ISA_ID_3C509_BNC 0x506d5091
|
|
#define ISA_ID_3C509_COMBO 0x506d5094
|
|
#define ISA_ID_3C509_TPO 0x506d5095
|
|
|
|
static struct isa_ident ep_isa_devs[] = {
|
|
{ ISA_ID_3C509_TP, "3Com EtherLink III (3c509-TP)" },
|
|
{ ISA_ID_3C509_BNC, "3Com EtherLink III (3c509-BNC)" },
|
|
{ ISA_ID_3C509_COMBO, "3Com EtherLink III (3c509-Combo)" },
|
|
{ ISA_ID_3C509_TPO, "3Com EtherLink III (3c509-TPO)" },
|
|
{ 0, NULL },
|
|
};
|
|
|
|
static struct isa_pnp_id ep_ids[] = {
|
|
{ 0x90506d50, NULL }, /* TCM5090 */
|
|
{ 0x91506d50, NULL }, /* TCM5091 */
|
|
{ 0x94506d50, NULL }, /* TCM5094 */
|
|
{ 0x95506d50, NULL }, /* TCM5095 */
|
|
{ 0xf780d041, NULL }, /* PNP80f7 */
|
|
{ 0, NULL },
|
|
};
|
|
|
|
/*
|
|
* We get eeprom data from the id_port given an offset into the eeprom.
|
|
* Basically; after the ID_sequence is sent to all of the cards; they enter
|
|
* the ID_CMD state where they will accept command requests. 0x80-0xbf loads
|
|
* the eeprom data. We then read the port 16 times and with every read; the
|
|
* cards check for contention (ie: if one card writes a 0 bit and another
|
|
* writes a 1 bit then the host sees a 0. At the end of the cycle; each card
|
|
* compares the data on the bus; if there is a difference then that card goes
|
|
* into ID_WAIT state again). In the meantime; one bit of data is returned in
|
|
* the AX register which is conveniently returned to us by inb(). Hence; we
|
|
* read 16 times getting one bit of data with each read.
|
|
*/
|
|
|
|
static int
|
|
get_eeprom_data(id_port, offset)
|
|
int id_port;
|
|
int offset;
|
|
{
|
|
int i, data = 0;
|
|
outb(id_port, 0x80 + offset);
|
|
for (i = 0; i < 16; i++) {
|
|
DELAY(BIT_DELAY_MULTIPLE * 1000);
|
|
data = (data << 1) | (inw(id_port) & 1);
|
|
}
|
|
return (data);
|
|
}
|
|
|
|
const char *
|
|
ep_isa_match_id (id, isa_devs)
|
|
u_int32_t id;
|
|
struct isa_ident * isa_devs;
|
|
{
|
|
struct isa_ident * i = isa_devs;
|
|
while(i->name != NULL) {
|
|
if (id == i->id)
|
|
return (i->name);
|
|
i++;
|
|
}
|
|
return (NULL);
|
|
}
|
|
|
|
static void
|
|
ep_isa_identify (driver_t *driver, device_t parent)
|
|
{
|
|
int tag = EP_LAST_TAG;
|
|
int found = 0;
|
|
int i;
|
|
int j;
|
|
const char * desc;
|
|
u_int32_t data;
|
|
u_int32_t irq;
|
|
u_int32_t ioport;
|
|
u_int32_t isa_id;
|
|
device_t child;
|
|
|
|
outb(ELINK_ID_PORT, 0);
|
|
outb(ELINK_ID_PORT, 0);
|
|
|
|
elink_idseq(ELINK_509_POLY);
|
|
elink_reset();
|
|
|
|
DELAY(DELAY_MULTIPLE * 10000);
|
|
|
|
for (i = 0; i < EP_MAX_BOARDS; i++) {
|
|
|
|
outb(ELINK_ID_PORT, 0);
|
|
outb(ELINK_ID_PORT, 0);
|
|
elink_idseq(0xCF);
|
|
|
|
/* For the first probe, clear all
|
|
* board's tag registers.
|
|
* Otherwise kill off already-found
|
|
* boards. -- linux 3c509.c
|
|
*/
|
|
if (i == 0) {
|
|
outb(ELINK_ID_PORT, 0xd0);
|
|
} else {
|
|
outb(ELINK_ID_PORT, 0xd8);
|
|
}
|
|
|
|
/*
|
|
* Construct an 'isa_id' in 'EISA'
|
|
* format.
|
|
*/
|
|
data = get_eeprom_data(ELINK_ID_PORT, EEPROM_MFG_ID);
|
|
isa_id = (htons(data) << 16);
|
|
data = get_eeprom_data(ELINK_ID_PORT, EEPROM_PROD_ID);
|
|
isa_id |= htons(data);
|
|
|
|
/* Find known ISA boards */
|
|
desc = ep_isa_match_id(isa_id, ep_isa_devs);
|
|
if (!desc) {
|
|
if (bootverbose) {
|
|
device_printf(parent, "if_ep: unknown ID 0x%08x\n",
|
|
isa_id);
|
|
}
|
|
break;
|
|
}
|
|
|
|
/* resolve contention using the Ethernet address */
|
|
for (j = 0; j < 3; j++) {
|
|
get_eeprom_data(ELINK_ID_PORT, j);
|
|
}
|
|
|
|
/* Retreive IRQ */
|
|
data = get_eeprom_data(ELINK_ID_PORT, EEPROM_RESOURCE_CFG);
|
|
irq = (data >> 12);
|
|
|
|
/* Retreive IOPORT */
|
|
data = get_eeprom_data(ELINK_ID_PORT, EEPROM_ADDR_CFG);
|
|
#ifdef PC98
|
|
ioport = ((data * 0x100) + 0x40d0);
|
|
#else
|
|
ioport = ((data << 4) + 0x200);
|
|
#endif
|
|
|
|
/* Set the adaptor tag so that the next card can be found. */
|
|
outb(ELINK_ID_PORT, tag--);
|
|
|
|
/* Activate the adaptor at the EEPROM location. */
|
|
outb(ELINK_ID_PORT, ((ioport >> 4) | 0xe0));
|
|
|
|
/* Test for an adapter in PnP mode */
|
|
data = inw(ioport + EP_W0_EEPROM_COMMAND);
|
|
if (data & EEPROM_TST_MODE) {
|
|
device_printf(parent, "if_ep: Adapter at 0x%03x in PnP mode!\n",
|
|
ioport);
|
|
continue;
|
|
}
|
|
|
|
child = BUS_ADD_CHILD(parent, ISA_ORDER_SPECULATIVE, "ep", -1);
|
|
device_set_desc_copy(child, desc);
|
|
device_set_driver(child, driver);
|
|
bus_set_resource(child, SYS_RES_IRQ, 0, irq, 1);
|
|
bus_set_resource(child, SYS_RES_IOPORT, 0, ioport, EP_IOSIZE);
|
|
|
|
if (bootverbose) {
|
|
device_printf(parent, "if_ep: <%s> at port 0x%03x-0x%03x irq %d\n",
|
|
desc, ioport, ioport + EP_IOSIZE, irq);
|
|
}
|
|
|
|
found++;
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
static int
|
|
ep_isa_probe (device_t dev)
|
|
{
|
|
int error = 0;
|
|
|
|
/* Check isapnp ids */
|
|
error = ISA_PNP_PROBE(device_get_parent(dev), dev, ep_ids);
|
|
|
|
/* If the card had a PnP ID that didn't match any we know about */
|
|
if (error == ENXIO) {
|
|
return (error);
|
|
}
|
|
|
|
/* If we had some other problem. */
|
|
if (!(error == 0 || error == ENOENT)) {
|
|
return (error);
|
|
}
|
|
|
|
/* If we have the resources we need then we're good to go. */
|
|
if ((bus_get_resource_start(dev, SYS_RES_IOPORT, 0) != 0) &&
|
|
(bus_get_resource_start(dev, SYS_RES_IRQ, 0) != 0)) {
|
|
return (0);
|
|
}
|
|
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
ep_isa_attach (device_t dev)
|
|
{
|
|
struct ep_softc * sc = device_get_softc(dev);
|
|
int error = 0;
|
|
|
|
if ((error = ep_alloc(dev))) {
|
|
device_printf(dev, "ep_alloc() failed! (%d)\n", error);
|
|
goto bad;
|
|
}
|
|
|
|
ep_get_media(sc);
|
|
|
|
GO_WINDOW(0);
|
|
SET_IRQ(BASE, rman_get_start(sc->irq));
|
|
|
|
if ((error = ep_attach(sc))) {
|
|
device_printf(dev, "ep_attach() failed! (%d)\n", error);
|
|
goto bad;
|
|
}
|
|
|
|
if ((error = bus_setup_intr(dev, sc->irq, INTR_TYPE_NET, ep_intr,
|
|
sc, &sc->ep_intrhand))) {
|
|
device_printf(dev, "bus_setup_intr() failed! (%d)\n", error);
|
|
goto bad;
|
|
}
|
|
|
|
return (0);
|
|
bad:
|
|
ep_free(dev);
|
|
return (error);
|
|
}
|
|
|
|
static device_method_t ep_isa_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_identify, ep_isa_identify),
|
|
DEVMETHOD(device_probe, ep_isa_probe),
|
|
DEVMETHOD(device_attach, ep_isa_attach),
|
|
|
|
{ 0, 0 }
|
|
};
|
|
|
|
static driver_t ep_isa_driver = {
|
|
"ep",
|
|
ep_isa_methods,
|
|
sizeof(struct ep_softc),
|
|
};
|
|
|
|
extern devclass_t ep_devclass;
|
|
|
|
DRIVER_MODULE(ep, isa, ep_isa_driver, ep_devclass, 0, 0);
|