7e6cabd06e
Renumber cluase 4 to 3, per what everybody else did when BSD granted them permission to remove clause 3. My insistance on keeping the same numbering for legal reasons is too pedantic, so give up on that point. Submitted by: Jan Schaumann <jschauma@stevens.edu> Pull Request: https://github.com/freebsd/freebsd/pull/96
251 lines
7.8 KiB
C
251 lines
7.8 KiB
C
/*-
|
|
* Copyright (c) 1991 The Regents of the University of California.
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the University nor the names of its contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* from: @(#)ns16550.h 7.1 (Berkeley) 5/9/91
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
/*
|
|
* NS8250... UART registers.
|
|
*/
|
|
|
|
/* 8250 registers #[0-6]. */
|
|
|
|
#define com_data 0 /* data register (R/W) */
|
|
#define REG_DATA com_data
|
|
|
|
#define com_ier 1 /* interrupt enable register (W) */
|
|
#define REG_IER com_ier
|
|
#define IER_ERXRDY 0x1
|
|
#define IER_ETXRDY 0x2
|
|
#define IER_ERLS 0x4
|
|
#define IER_EMSC 0x8
|
|
/*
|
|
* Receive timeout interrupt enable.
|
|
* Implemented in Intel XScale, Ingenic XBurst.
|
|
*/
|
|
#define IER_RXTMOUT 0x10
|
|
|
|
#define IER_BITS "\20\1ERXRDY\2ETXRDY\3ERLS\4EMSC\5RXTMOUT"
|
|
|
|
#define com_iir 2 /* interrupt identification register (R) */
|
|
#define REG_IIR com_iir
|
|
#define IIR_IMASK 0xf
|
|
#define IIR_RXTOUT 0xc
|
|
#define IIR_BUSY 0x7
|
|
#define IIR_RLS 0x6
|
|
#define IIR_RXRDY 0x4
|
|
#define IIR_TXRDY 0x2
|
|
#define IIR_NOPEND 0x1
|
|
#define IIR_MLSC 0x0
|
|
#define IIR_FIFO_MASK 0xc0 /* set if FIFOs are enabled */
|
|
|
|
#define IIR_BITS "\20\1NOPEND\2TXRDY\3RXRDY"
|
|
|
|
#define com_lcr 3 /* line control register (R/W) */
|
|
#define com_cfcr com_lcr /* character format control register (R/W) */
|
|
#define REG_LCR com_lcr
|
|
#define LCR_DLAB 0x80
|
|
#define CFCR_DLAB LCR_DLAB
|
|
#define LCR_EFR_ENABLE 0xbf /* magic to enable EFR on 16650 up */
|
|
#define CFCR_EFR_ENABLE LCR_EFR_ENABLE
|
|
#define LCR_SBREAK 0x40
|
|
#define CFCR_SBREAK LCR_SBREAK
|
|
#define LCR_PZERO 0x30
|
|
#define CFCR_PZERO LCR_PZERO
|
|
#define LCR_PONE 0x20
|
|
#define CFCR_PONE LCR_PONE
|
|
#define LCR_PEVEN 0x10
|
|
#define CFCR_PEVEN LCR_PEVEN
|
|
#define LCR_PODD 0x00
|
|
#define CFCR_PODD LCR_PODD
|
|
#define LCR_PENAB 0x08
|
|
#define CFCR_PENAB LCR_PENAB
|
|
#define LCR_STOPB 0x04
|
|
#define CFCR_STOPB LCR_STOPB
|
|
#define LCR_8BITS 0x03
|
|
#define CFCR_8BITS LCR_8BITS
|
|
#define LCR_7BITS 0x02
|
|
#define CFCR_7BITS LCR_7BITS
|
|
#define LCR_6BITS 0x01
|
|
#define CFCR_6BITS LCR_6BITS
|
|
#define LCR_5BITS 0x00
|
|
#define CFCR_5BITS LCR_5BITS
|
|
|
|
#define com_mcr 4 /* modem control register (R/W) */
|
|
#define REG_MCR com_mcr
|
|
#define MCR_PRESCALE 0x80 /* only available on 16650 up */
|
|
#define MCR_LOOPBACK 0x10
|
|
#define MCR_IE 0x08
|
|
#define MCR_IENABLE MCR_IE
|
|
#define MCR_DRS 0x04
|
|
#define MCR_RTS 0x02
|
|
#define MCR_DTR 0x01
|
|
|
|
#define MCR_BITS "\20\1DTR\2RTS\3DRS\4IE\5LOOPBACK\10PRESCALE"
|
|
|
|
#define com_lsr 5 /* line status register (R/W) */
|
|
#define REG_LSR com_lsr
|
|
#define LSR_RCV_FIFO 0x80
|
|
#define LSR_TEMT 0x40
|
|
#define LSR_TSRE LSR_TEMT
|
|
#define LSR_THRE 0x20
|
|
#define LSR_TXRDY LSR_THRE
|
|
#define LSR_BI 0x10
|
|
#define LSR_FE 0x08
|
|
#define LSR_PE 0x04
|
|
#define LSR_OE 0x02
|
|
#define LSR_RXRDY 0x01
|
|
#define LSR_RCV_MASK 0x1f
|
|
|
|
#define LSR_BITS "\20\1RXRDY\2OE\3PE\4FE\5BI\6THRE\7TEMT\10RCV_FIFO"
|
|
|
|
#define com_msr 6 /* modem status register (R/W) */
|
|
#define REG_MSR com_msr
|
|
#define MSR_DCD 0x80
|
|
#define MSR_RI 0x40
|
|
#define MSR_DSR 0x20
|
|
#define MSR_CTS 0x10
|
|
#define MSR_DDCD 0x08
|
|
#define MSR_TERI 0x04
|
|
#define MSR_DDSR 0x02
|
|
#define MSR_DCTS 0x01
|
|
|
|
#define MSR_BITS "\20\1DCTS\2DDSR\3TERI\4DDCD\5CTS\6DSR\7RI\10DCD"
|
|
|
|
/* 8250 multiplexed registers #[0-1]. Access enabled by LCR[7]. */
|
|
#define com_dll 0 /* divisor latch low (R/W) */
|
|
#define com_dlbl com_dll
|
|
#define com_dlm 1 /* divisor latch high (R/W) */
|
|
#define com_dlbh com_dlm
|
|
#define REG_DLL com_dll
|
|
#define REG_DLH com_dlm
|
|
|
|
/* 16450 register #7. Not multiplexed. */
|
|
#define com_scr 7 /* scratch register (R/W) */
|
|
|
|
/* 16550 register #2. Not multiplexed. */
|
|
#define com_fcr 2 /* FIFO control register (W) */
|
|
#define com_fifo com_fcr
|
|
#define REG_FCR com_fcr
|
|
#define FCR_ENABLE 0x01
|
|
#define FIFO_ENABLE FCR_ENABLE
|
|
#define FCR_RCV_RST 0x02
|
|
#define FIFO_RCV_RST FCR_RCV_RST
|
|
#define FCR_XMT_RST 0x04
|
|
#define FIFO_XMT_RST FCR_XMT_RST
|
|
#define FCR_DMA 0x08
|
|
#define FIFO_DMA_MODE FCR_DMA
|
|
#ifdef CPU_XBURST
|
|
#define FCR_UART_ON 0x10
|
|
#endif
|
|
#define FCR_RX_LOW 0x00
|
|
#define FIFO_RX_LOW FCR_RX_LOW
|
|
#define FCR_RX_MEDL 0x40
|
|
#define FIFO_RX_MEDL FCR_RX_MEDL
|
|
#define FCR_RX_MEDH 0x80
|
|
#define FIFO_RX_MEDH FCR_RX_MEDH
|
|
#define FCR_RX_HIGH 0xc0
|
|
#define FIFO_RX_HIGH FCR_RX_HIGH
|
|
|
|
#define FCR_BITS "\20\1ENABLE\2RCV_RST\3XMT_RST\4DMA"
|
|
|
|
/* 16650 registers #2,[4-7]. Access enabled by LCR_EFR_ENABLE. */
|
|
|
|
#define com_efr 2 /* enhanced features register (R/W) */
|
|
#define REG_EFR com_efr
|
|
#define EFR_CTS 0x80
|
|
#define EFR_AUTOCTS EFR_CTS
|
|
#define EFR_RTS 0x40
|
|
#define EFR_AUTORTS EFR_RTS
|
|
#define EFR_EFE 0x10 /* enhanced functions enable */
|
|
|
|
#define com_xon1 4 /* XON 1 character (R/W) */
|
|
#define com_xon2 5 /* XON 2 character (R/W) */
|
|
#define com_xoff1 6 /* XOFF 1 character (R/W) */
|
|
#define com_xoff2 7 /* XOFF 2 character (R/W) */
|
|
|
|
#define DW_REG_USR 31 /* DesignWare derived Uart Status Reg */
|
|
#define com_usr 39 /* Octeon 16750/16550 Uart Status Reg */
|
|
#define REG_USR com_usr
|
|
#define USR_BUSY 1 /* Uart Busy. Serial transfer in progress */
|
|
#define USR_TXFIFO_NOTFULL 2 /* Uart TX FIFO Not full */
|
|
|
|
/* 16950 register #1. Access enabled by ACR[7]. Also requires !LCR[7]. */
|
|
#define com_asr 1 /* additional status register (R[0-7]/W[0-1]) */
|
|
|
|
/* 16950 register #3. R/W access enabled by ACR[7]. */
|
|
#define com_rfl 3 /* receiver fifo level (R) */
|
|
|
|
/*
|
|
* 16950 register #4. Access enabled by ACR[7]. Also requires
|
|
* !LCR_EFR_ENABLE.
|
|
*/
|
|
#define com_tfl 4 /* transmitter fifo level (R) */
|
|
|
|
/*
|
|
* 16950 register #5. Accessible if !LCR_EFR_ENABLE. Read access also
|
|
* requires ACR[6].
|
|
*/
|
|
#define com_icr 5 /* index control register (R/W) */
|
|
#define REG_ICR com_icr
|
|
|
|
/*
|
|
* 16950 register #7. It is the same as com_scr except it has a different
|
|
* abbreviation in the manufacturer's data sheet and it also serves as an
|
|
* index into the Indexed Control register set.
|
|
*/
|
|
#define com_spr com_scr /* scratch pad (and index) register (R/W) */
|
|
#define REG_SPR com_scr
|
|
|
|
/*
|
|
* 16950 indexed control registers #[0-0x13]. Access is via index in SPR,
|
|
* data in ICR (if ICR is accessible).
|
|
*/
|
|
|
|
#define com_acr 0 /* additional control register (R/W) */
|
|
#define REG_ACR com_acr
|
|
#define ACR_ASE 0x80 /* ASR/RFL/TFL enable */
|
|
#define ACR_ICRE 0x40 /* ICR enable */
|
|
#define ACR_TLE 0x20 /* TTL/RTL enable */
|
|
|
|
#define com_cpr 1 /* clock prescaler register (R/W) */
|
|
#define com_tcr 2 /* times clock register (R/W) */
|
|
#define com_ttl 4 /* transmitter trigger level (R/W) */
|
|
#define com_rtl 5 /* receiver trigger level (R/W) */
|
|
/* ... */
|
|
|
|
/* Hardware extension mode register for RSB-2000/3000. */
|
|
#define com_emr com_msr
|
|
#define EMR_EXBUFF 0x04
|
|
#define EMR_CTSFLW 0x08
|
|
#define EMR_DSRFLW 0x10
|
|
#define EMR_RTSFLW 0x20
|
|
#define EMR_DTRFLW 0x40
|
|
#define EMR_EFMODE 0x80
|