freebsd-skq/sys/dev/rtwn/rtl8192e/usb/r92eu_init.c
kevlo 3dfa47ebb8 Add support for the Realtek RTL8192EU chipset.
Committed over the D-Link DWA-131 rev E1 on amd64 with WPA.

Reviewed by:	avos
2017-01-24 02:35:38 +00:00

97 lines
2.9 KiB
C

/*-
* Copyright (c) 2017 Kevin Lo <kevlo@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_wlan.h"
#include <sys/param.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/mbuf.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/queue.h>
#include <sys/taskqueue.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/linker.h>
#include <net/if.h>
#include <net/ethernet.h>
#include <net/if_media.h>
#include <net80211/ieee80211_var.h>
#include <net80211/ieee80211_radiotap.h>
#include <dev/rtwn/if_rtwnreg.h>
#include <dev/rtwn/if_rtwnvar.h>
#include <dev/rtwn/rtl8192e/r92e_var.h>
#include <dev/rtwn/rtl8192e/usb/r92eu.h>
#include <dev/rtwn/rtl8192e/usb/r92eu_reg.h>
void
r92eu_init_rx_agg(struct rtwn_softc *sc)
{
struct r92e_softc *rs = sc->sc_priv;
/* Rx aggregation (USB). */
rtwn_setbits_1(sc, R12A_RXDMA_PRO, 0x20, 0x1e);
rtwn_write_4(sc, R92C_RXDMA_AGG_PG_TH,
rs->ac_usb_dma_size | (rs->ac_usb_dma_time << 8));
rtwn_setbits_1(sc, R92C_TRXDMA_CTRL, 0,
R92C_TRXDMA_CTRL_RXDMA_AGG_EN);
}
void
r92eu_post_init(struct rtwn_softc *sc)
{
/* Setup RTS BW (equal to data BW). */
rtwn_setbits_1(sc, R92C_QUEUE_CTRL, 0x08, 0);
/* Reset USB mode switch setting. */
rtwn_write_1(sc, R92C_ACLK_MON, 0);
rtwn_write_1(sc, R92C_USB_HRPWM, 0);
#ifndef RTWN_WITHOUT_UCODE
if (sc->sc_flags & RTWN_FW_LOADED) {
if (sc->sc_ratectl_sysctl == RTWN_RATECTL_FW) {
/* TODO: implement */
sc->sc_ratectl = RTWN_RATECTL_NET80211;
} else
sc->sc_ratectl = sc->sc_ratectl_sysctl;
} else
#endif
sc->sc_ratectl = RTWN_RATECTL_NONE;
}