freebsd-skq/sys/kern/subr_kdb.c
Peter Wemm 43d7128c14 Expand kdb_alt_break a little, most commonly used with the option
ALT_BREAK_TO_DEBUGGER.  In addition to "Enter ~ ctrl-B" (to enter the
debugger), there is now "Enter ~ ctrl-P" (force panic) and
"Enter ~ ctrl-R" (request clean reboot, ala ctrl-alt-del on syscons).

We've used variations of this at work.  The force panic sequence is
best used with KDB_UNATTENDED for when you just want it to dump and
get on with it.

The reboot request is a safer way of getting into single user than
a power cycle.  eg: you've hosed the ability to log in (pam, rtld, etc).
It gives init the reboot signal, which causes an orderly reboot.

I've taken my best guess at what the !x86 and non-sio code changes
should be.

This also makes sio release its spinlock before calling KDB/DDB.
2008-05-04 23:29:38 +00:00

547 lines
12 KiB
C

/*-
* Copyright (c) 2004 The FreeBSD Project
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHORS ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_kdb.h"
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kdb.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/pcpu.h>
#include <sys/proc.h>
#include <sys/smp.h>
#include <sys/sysctl.h>
#include <machine/kdb.h>
#include <machine/pcb.h>
#ifdef SMP
#include <machine/smp.h>
#endif
int kdb_active = 0;
void *kdb_jmpbufp = NULL;
struct kdb_dbbe *kdb_dbbe = NULL;
struct pcb kdb_pcb;
struct pcb *kdb_thrctx = NULL;
struct thread *kdb_thread = NULL;
struct trapframe *kdb_frame = NULL;
KDB_BACKEND(null, NULL, NULL, NULL);
SET_DECLARE(kdb_dbbe_set, struct kdb_dbbe);
static int kdb_sysctl_available(SYSCTL_HANDLER_ARGS);
static int kdb_sysctl_current(SYSCTL_HANDLER_ARGS);
static int kdb_sysctl_enter(SYSCTL_HANDLER_ARGS);
static int kdb_sysctl_panic(SYSCTL_HANDLER_ARGS);
static int kdb_sysctl_trap(SYSCTL_HANDLER_ARGS);
static int kdb_sysctl_trap_code(SYSCTL_HANDLER_ARGS);
SYSCTL_NODE(_debug, OID_AUTO, kdb, CTLFLAG_RW, NULL, "KDB nodes");
SYSCTL_PROC(_debug_kdb, OID_AUTO, available, CTLTYPE_STRING | CTLFLAG_RD, 0, 0,
kdb_sysctl_available, "A", "list of available KDB backends");
SYSCTL_PROC(_debug_kdb, OID_AUTO, current, CTLTYPE_STRING | CTLFLAG_RW, 0, 0,
kdb_sysctl_current, "A", "currently selected KDB backend");
SYSCTL_PROC(_debug_kdb, OID_AUTO, enter, CTLTYPE_INT | CTLFLAG_RW, 0, 0,
kdb_sysctl_enter, "I", "set to enter the debugger");
SYSCTL_PROC(_debug_kdb, OID_AUTO, panic, CTLTYPE_INT | CTLFLAG_RW, 0, 0,
kdb_sysctl_panic, "I", "set to panic the kernel");
SYSCTL_PROC(_debug_kdb, OID_AUTO, trap, CTLTYPE_INT | CTLFLAG_RW, 0, 0,
kdb_sysctl_trap, "I", "set to cause a page fault via data access");
SYSCTL_PROC(_debug_kdb, OID_AUTO, trap_code, CTLTYPE_INT | CTLFLAG_RW, 0, 0,
kdb_sysctl_trap_code, "I", "set to cause a page fault via code access");
/*
* Flag indicating whether or not to IPI the other CPUs to stop them on
* entering the debugger. Sometimes, this will result in a deadlock as
* stop_cpus() waits for the other cpus to stop, so we allow it to be
* disabled.
*/
#ifdef SMP
static int kdb_stop_cpus = 1;
SYSCTL_INT(_debug_kdb, OID_AUTO, stop_cpus, CTLTYPE_INT | CTLFLAG_RW,
&kdb_stop_cpus, 0, "stop other CPUs when entering the debugger");
TUNABLE_INT("debug.kdb.stop_cpus", &kdb_stop_cpus);
#endif
/*
* Flag to indicate to debuggers why the debugger was entered.
*/
const char * volatile kdb_why = KDB_WHY_UNSET;
static int
kdb_sysctl_available(SYSCTL_HANDLER_ARGS)
{
struct kdb_dbbe *be, **iter;
char *avail, *p;
ssize_t len, sz;
int error;
sz = 0;
SET_FOREACH(iter, kdb_dbbe_set) {
be = *iter;
if (be->dbbe_active == 0)
sz += strlen(be->dbbe_name) + 1;
}
sz++;
avail = malloc(sz, M_TEMP, M_WAITOK);
p = avail;
*p = '\0';
SET_FOREACH(iter, kdb_dbbe_set) {
be = *iter;
if (be->dbbe_active == 0) {
len = snprintf(p, sz, "%s ", be->dbbe_name);
p += len;
sz -= len;
}
}
KASSERT(sz >= 0, ("%s", __func__));
error = sysctl_handle_string(oidp, avail, 0, req);
free(avail, M_TEMP);
return (error);
}
static int
kdb_sysctl_current(SYSCTL_HANDLER_ARGS)
{
char buf[16];
int error;
if (kdb_dbbe != NULL) {
strncpy(buf, kdb_dbbe->dbbe_name, sizeof(buf));
buf[sizeof(buf) - 1] = '\0';
} else
*buf = '\0';
error = sysctl_handle_string(oidp, buf, sizeof(buf), req);
if (error != 0 || req->newptr == NULL)
return (error);
if (kdb_active)
return (EBUSY);
return (kdb_dbbe_select(buf));
}
static int
kdb_sysctl_enter(SYSCTL_HANDLER_ARGS)
{
int error, i;
error = sysctl_wire_old_buffer(req, sizeof(int));
if (error == 0) {
i = 0;
error = sysctl_handle_int(oidp, &i, 0, req);
}
if (error != 0 || req->newptr == NULL)
return (error);
if (kdb_active)
return (EBUSY);
kdb_enter(KDB_WHY_SYSCTL, "sysctl debug.kdb.enter");
return (0);
}
static int
kdb_sysctl_panic(SYSCTL_HANDLER_ARGS)
{
int error, i;
error = sysctl_wire_old_buffer(req, sizeof(int));
if (error == 0) {
i = 0;
error = sysctl_handle_int(oidp, &i, 0, req);
}
if (error != 0 || req->newptr == NULL)
return (error);
panic("kdb_sysctl_panic");
return (0);
}
static int
kdb_sysctl_trap(SYSCTL_HANDLER_ARGS)
{
int error, i;
int *addr = (int *)0x10;
error = sysctl_wire_old_buffer(req, sizeof(int));
if (error == 0) {
i = 0;
error = sysctl_handle_int(oidp, &i, 0, req);
}
if (error != 0 || req->newptr == NULL)
return (error);
return (*addr);
}
static int
kdb_sysctl_trap_code(SYSCTL_HANDLER_ARGS)
{
int error, i;
void (*fp)(u_int, u_int, u_int) = (void *)0xdeadc0de;
error = sysctl_wire_old_buffer(req, sizeof(int));
if (error == 0) {
i = 0;
error = sysctl_handle_int(oidp, &i, 0, req);
}
if (error != 0 || req->newptr == NULL)
return (error);
(*fp)(0x11111111, 0x22222222, 0x33333333);
return (0);
}
void
kdb_panic(const char *msg)
{
#ifdef SMP
stop_cpus(PCPU_GET(other_cpus));
#endif
printf("KDB: panic\n");
panic(msg);
}
void
kdb_reboot(void)
{
printf("KDB: reboot requested\n");
shutdown_nice(0);
}
/*
* Solaris implements a new BREAK which is initiated by a character sequence
* CR ~ ^b which is similar to a familiar pattern used on Sun servers by the
* Remote Console.
*
* Note that this function may be called from almost anywhere, with interrupts
* disabled and with unknown locks held, so it must not access data other than
* its arguments. Its up to the caller to ensure that the state variable is
* consistent.
*/
#define KEY_CR 13 /* CR '\r' */
#define KEY_TILDE 126 /* ~ */
#define KEY_CRTLB 2 /* ^B */
#define KEY_CRTLP 16 /* ^P */
#define KEY_CRTLR 18 /* ^R */
int
kdb_alt_break(int key, int *state)
{
int brk;
brk = 0;
switch (*state) {
case 0:
if (key == KEY_CR)
*state = 1;
break;
case 1:
if (key == KEY_TILDE)
*state = 2;
break;
case 2:
if (key == KEY_CRTLB)
brk = KDB_REQ_DEBUGGER;
else if (key == KEY_CRTLP)
brk = KDB_REQ_PANIC;
else if (key == KEY_CRTLR)
brk = KDB_REQ_REBOOT;
*state = 0;
}
return (brk);
}
/*
* Print a backtrace of the calling thread. The backtrace is generated by
* the selected debugger, provided it supports backtraces. If no debugger
* is selected or the current debugger does not support backtraces, this
* function silently returns.
*/
void
kdb_backtrace()
{
if (kdb_dbbe != NULL && kdb_dbbe->dbbe_trace != NULL) {
printf("KDB: stack backtrace:\n");
kdb_dbbe->dbbe_trace();
}
}
/*
* Set/change the current backend.
*/
int
kdb_dbbe_select(const char *name)
{
struct kdb_dbbe *be, **iter;
SET_FOREACH(iter, kdb_dbbe_set) {
be = *iter;
if (be->dbbe_active == 0 && strcmp(be->dbbe_name, name) == 0) {
kdb_dbbe = be;
return (0);
}
}
return (EINVAL);
}
/*
* Enter the currently selected debugger. If a message has been provided,
* it is printed first. If the debugger does not support the enter method,
* it is entered by using breakpoint(), which enters the debugger through
* kdb_trap(). The 'why' argument will contain a more mechanically usable
* string than 'msg', and is relied upon by DDB scripting to identify the
* reason for entering the debugger so that the right script can be run.
*/
void
kdb_enter(const char *why, const char *msg)
{
if (kdb_dbbe != NULL && kdb_active == 0) {
if (msg != NULL)
printf("KDB: enter: %s\n", msg);
kdb_why = why;
breakpoint();
kdb_why = KDB_WHY_UNSET;
}
}
/*
* Initialize the kernel debugger interface.
*/
void
kdb_init()
{
struct kdb_dbbe *be, **iter;
int cur_pri, pri;
kdb_active = 0;
kdb_dbbe = NULL;
cur_pri = -1;
SET_FOREACH(iter, kdb_dbbe_set) {
be = *iter;
pri = (be->dbbe_init != NULL) ? be->dbbe_init() : -1;
be->dbbe_active = (pri >= 0) ? 0 : -1;
if (pri > cur_pri) {
cur_pri = pri;
kdb_dbbe = be;
}
}
if (kdb_dbbe != NULL) {
printf("KDB: debugger backends:");
SET_FOREACH(iter, kdb_dbbe_set) {
be = *iter;
if (be->dbbe_active == 0)
printf(" %s", be->dbbe_name);
}
printf("\n");
printf("KDB: current backend: %s\n",
kdb_dbbe->dbbe_name);
}
}
/*
* Handle contexts.
*/
void *
kdb_jmpbuf(jmp_buf new)
{
void *old;
old = kdb_jmpbufp;
kdb_jmpbufp = new;
return (old);
}
void
kdb_reenter(void)
{
if (!kdb_active || kdb_jmpbufp == NULL)
return;
longjmp(kdb_jmpbufp, 1);
/* NOTREACHED */
}
/*
* Thread related support functions.
*/
struct pcb *
kdb_thr_ctx(struct thread *thr)
{
#if defined(SMP) && defined(KDB_STOPPEDPCB)
struct pcpu *pc;
#endif
if (thr == curthread)
return (&kdb_pcb);
#if defined(SMP) && defined(KDB_STOPPEDPCB)
SLIST_FOREACH(pc, &cpuhead, pc_allcpu) {
if (pc->pc_curthread == thr && (stopped_cpus & pc->pc_cpumask))
return (KDB_STOPPEDPCB(pc));
}
#endif
return (thr->td_pcb);
}
struct thread *
kdb_thr_first(void)
{
struct proc *p;
struct thread *thr;
p = LIST_FIRST(&allproc);
while (p != NULL) {
if (p->p_flag & P_INMEM) {
thr = FIRST_THREAD_IN_PROC(p);
if (thr != NULL)
return (thr);
}
p = LIST_NEXT(p, p_list);
}
return (NULL);
}
struct thread *
kdb_thr_from_pid(pid_t pid)
{
struct proc *p;
p = LIST_FIRST(&allproc);
while (p != NULL) {
if (p->p_flag & P_INMEM && p->p_pid == pid)
return (FIRST_THREAD_IN_PROC(p));
p = LIST_NEXT(p, p_list);
}
return (NULL);
}
struct thread *
kdb_thr_lookup(lwpid_t tid)
{
struct thread *thr;
thr = kdb_thr_first();
while (thr != NULL && thr->td_tid != tid)
thr = kdb_thr_next(thr);
return (thr);
}
struct thread *
kdb_thr_next(struct thread *thr)
{
struct proc *p;
p = thr->td_proc;
thr = TAILQ_NEXT(thr, td_plist);
do {
if (thr != NULL)
return (thr);
p = LIST_NEXT(p, p_list);
if (p != NULL && (p->p_flag & P_INMEM))
thr = FIRST_THREAD_IN_PROC(p);
} while (p != NULL);
return (NULL);
}
int
kdb_thr_select(struct thread *thr)
{
if (thr == NULL)
return (EINVAL);
kdb_thread = thr;
kdb_thrctx = kdb_thr_ctx(thr);
return (0);
}
/*
* Enter the debugger due to a trap.
*/
int
kdb_trap(int type, int code, struct trapframe *tf)
{
register_t intr;
#ifdef SMP
int did_stop_cpus;
#endif
int handled;
if (kdb_dbbe == NULL || kdb_dbbe->dbbe_trap == NULL)
return (0);
/* We reenter the debugger through kdb_reenter(). */
if (kdb_active)
return (0);
intr = intr_disable();
#ifdef SMP
if ((did_stop_cpus = kdb_stop_cpus) != 0)
stop_cpus(PCPU_GET(other_cpus));
#endif
kdb_active++;
kdb_frame = tf;
/* Let MD code do its thing first... */
kdb_cpu_trap(type, code);
makectx(tf, &kdb_pcb);
kdb_thr_select(curthread);
handled = kdb_dbbe->dbbe_trap(type, code);
kdb_active--;
#ifdef SMP
if (did_stop_cpus)
restart_cpus(stopped_cpus);
#endif
intr_restore(intr);
return (handled);
}