freebsd-skq/sys/geom/vinum/geom_vinum_rm.c
Ulf Lilleengen c0b9797aa8 Import the gvinum work that have been done during and after Summer of Code 2007.
The work have been under testing and fixing since then, and it is mature enough
to be put into HEAD for further testing.

A lot have changed in this time, and here are the most important:
- Gvinum now uses one single workerthread instead of one thread for each
  volume and each plex. The reason for this is that the previous scheme was
  very complex, and was the cause of many of the bugs discovered in gvinum.
  Instead, gvinum now uses one worker thread with an event queue, quite
  similar to what used in gmirror.
- The rebuild/grow/initialize/parity check routines no longer runs in
  separate threads, but are run as regular I/O requests with special flags.
  This made it easier to support mounted growing and parity rebuild.
- Support for growing striped and raid5-plexes, meaning that one can extend the
  volumes for these plex types in addition to the concat type. Also works while
  the volume is mounted.
- Implementation of many of the missing commands from the old vinum:
  attach/detach, start (was partially implemented), stop (was partially
  implemented), concat, mirror, stripe, raid5 (shortcuts for creating volumes
  with one plex of these organizations).
- The parity check and rebuild no longer goes between userland/kernel, meaning
  that the gvinum command will not stay and wait forever for the rebuild to
  finish. You can instead watch the status with the list command.
- Many problems with gvinum have been reported since 5.x, and some has been hard
  to fix due to the complicated architecture. Hopefully, it should be more
  stable and better handle edge cases that previously made gvinum crash.
- Failed drives no longer disappears entirely, but now leave behind a dummy
  drive that makes sure the original state is not forgotten in case the system
  is rebooted between drive failures/swaps.
- Update manpage to reflect new commands and extend it with some examples.

Sponsored by:   Google Summer of Code 2007
Mentored by:    le
Tested by:      Rick C. Petty <rick-freebsd2008 -at- kiwi-computer.com>
2009-03-28 17:20:08 +00:00

382 lines
9.1 KiB
C

/*-
* Copyright (c) 2004, 2007 Lukas Ertl
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/libkern.h>
#include <sys/malloc.h>
#include <geom/geom.h>
#include <geom/vinum/geom_vinum_var.h>
#include <geom/vinum/geom_vinum.h>
/* General 'remove' routine. */
void
gv_remove(struct g_geom *gp, struct gctl_req *req)
{
struct gv_softc *sc;
struct gv_volume *v;
struct gv_plex *p;
struct gv_sd *s;
struct gv_drive *d;
int *argc, *flags;
char *argv, buf[20];
int i, type;
argc = gctl_get_paraml(req, "argc", sizeof(*argc));
if (argc == NULL || *argc == 0) {
gctl_error(req, "no arguments given");
return;
}
flags = gctl_get_paraml(req, "flags", sizeof(*flags));
if (flags == NULL) {
gctl_error(req, "no flags given");
return;
}
sc = gp->softc;
/* XXX config locking */
for (i = 0; i < *argc; i++) {
snprintf(buf, sizeof(buf), "argv%d", i);
argv = gctl_get_param(req, buf, NULL);
if (argv == NULL)
continue;
type = gv_object_type(sc, argv);
switch (type) {
case GV_TYPE_VOL:
v = gv_find_vol(sc, argv);
/*
* If this volume has plexes, we want a recursive
* removal.
*/
if (!LIST_EMPTY(&v->plexes) && !(*flags & GV_FLAG_R)) {
gctl_error(req, "volume '%s' has attached "
"plexes - need recursive removal", v->name);
return;
}
gv_post_event(sc, GV_EVENT_RM_VOLUME, v, NULL, 0, 0);
break;
case GV_TYPE_PLEX:
p = gv_find_plex(sc, argv);
/*
* If this plex has subdisks, we want a recursive
* removal.
*/
if (!LIST_EMPTY(&p->subdisks) &&
!(*flags & GV_FLAG_R)) {
gctl_error(req, "plex '%s' has attached "
"subdisks - need recursive removal",
p->name);
return;
}
/* Don't allow removal of the only plex of a volume. */
if (p->vol_sc != NULL && p->vol_sc->plexcount == 1) {
gctl_error(req, "plex '%s' is still attached "
"to volume '%s'", p->name, p->volume);
return;
}
gv_post_event(sc, GV_EVENT_RM_PLEX, p, NULL, 0, 0);
break;
case GV_TYPE_SD:
s = gv_find_sd(sc, argv);
/* Don't allow removal if attached to a plex. */
if (s->plex_sc != NULL) {
gctl_error(req, "subdisk '%s' is still attached"
" to plex '%s'", s->name, s->plex_sc->name);
return;
}
gv_post_event(sc, GV_EVENT_RM_SD, s, NULL, 0, 0);
break;
case GV_TYPE_DRIVE:
d = gv_find_drive(sc, argv);
/* We don't allow to remove open drives. */
if (gv_consumer_is_open(d->consumer) &&
!(*flags & GV_FLAG_F)) {
gctl_error(req, "drive '%s' is open", d->name);
return;
}
/* A drive with subdisks needs a recursive removal. */
/* if (!LIST_EMPTY(&d->subdisks) &&
!(*flags & GV_FLAG_R)) {
gctl_error(req, "drive '%s' still has subdisks"
" - need recursive removal", d->name);
return;
}*/
gv_post_event(sc, GV_EVENT_RM_DRIVE, d, NULL, *flags,
0);
break;
default:
gctl_error(req, "unknown object '%s'", argv);
return;
}
}
gv_post_event(sc, GV_EVENT_SAVE_CONFIG, sc, NULL, 0, 0);
}
/* Resets configuration */
int
gv_resetconfig(struct gv_softc *sc)
{
struct gv_drive *d, *d2;
struct gv_volume *v, *v2;
struct gv_plex *p, *p2;
struct gv_sd *s, *s2;
/* First make sure nothing is open. */
LIST_FOREACH_SAFE(d, &sc->drives, drive, d2) {
if (gv_consumer_is_open(d->consumer)) {
return (GV_ERR_ISBUSY);
}
}
/* Then if not, we remove everything. */
LIST_FOREACH_SAFE(s, &sc->subdisks, sd, s2)
gv_rm_sd(sc, s);
LIST_FOREACH_SAFE(d, &sc->drives, drive, d2)
gv_rm_drive(sc, d, 0);
LIST_FOREACH_SAFE(p, &sc->plexes, plex, p2)
gv_rm_plex(sc, p);
LIST_FOREACH_SAFE(v, &sc->volumes, volume, v2)
gv_rm_vol(sc, v);
gv_post_event(sc, GV_EVENT_SAVE_CONFIG, sc, NULL, 0, 0);
return (0);
}
/* Remove a volume. */
void
gv_rm_vol(struct gv_softc *sc, struct gv_volume *v)
{
struct g_provider *pp;
struct gv_plex *p, *p2;
KASSERT(v != NULL, ("gv_rm_vol: NULL v"));
pp = v->provider;
KASSERT(pp != NULL, ("gv_rm_vol: NULL pp"));
/* Check if any of our consumers is open. */
if (gv_provider_is_open(pp)) {
G_VINUM_DEBUG(0, "Unable to remove %s: volume still in use",
v->name);
return;
}
/* Remove the plexes our volume has. */
LIST_FOREACH_SAFE(p, &v->plexes, in_volume, p2)
gv_rm_plex(sc, p);
/* Clean up. */
LIST_REMOVE(v, volume);
g_free(v);
/* Get rid of the volume's provider. */
if (pp != NULL) {
g_topology_lock();
pp->flags |= G_PF_WITHER;
g_orphan_provider(pp, ENXIO);
g_topology_unlock();
}
}
/* Remove a plex. */
void
gv_rm_plex(struct gv_softc *sc, struct gv_plex *p)
{
struct gv_volume *v;
struct gv_sd *s, *s2;
KASSERT(p != NULL, ("gv_rm_plex: NULL p"));
v = p->vol_sc;
/* Check if any of our consumers is open. */
if (v != NULL && gv_provider_is_open(v->provider) && v->plexcount < 2) {
G_VINUM_DEBUG(0, "Unable to remove %s: volume still in use",
p->name);
return;
}
/* Remove the subdisks our plex has. */
LIST_FOREACH_SAFE(s, &p->subdisks, in_plex, s2)
gv_rm_sd(sc, s);
v = p->vol_sc;
/* Clean up and let our geom fade away. */
LIST_REMOVE(p, plex);
if (p->vol_sc != NULL) {
p->vol_sc->plexcount--;
LIST_REMOVE(p, in_volume);
p->vol_sc = NULL;
/* Correctly update the volume size. */
gv_update_vol_size(v, gv_vol_size(v));
}
g_free(p);
}
/* Remove a subdisk. */
void
gv_rm_sd(struct gv_softc *sc, struct gv_sd *s)
{
struct gv_plex *p;
struct gv_volume *v;
KASSERT(s != NULL, ("gv_rm_sd: NULL s"));
p = s->plex_sc;
v = NULL;
/* Clean up. */
if (p != NULL) {
LIST_REMOVE(s, in_plex);
s->plex_sc = NULL;
p->sdcount--;
/* Update the plexsize. */
p->size = gv_plex_size(p);
v = p->vol_sc;
if (v != NULL) {
/* Update the size of our plex' volume. */
gv_update_vol_size(v, gv_vol_size(v));
}
}
if (s->drive_sc && !(s->drive_sc->flags & GV_DRIVE_REFERENCED))
LIST_REMOVE(s, from_drive);
LIST_REMOVE(s, sd);
gv_free_sd(s);
g_free(s);
}
/* Remove a drive. */
void
gv_rm_drive(struct gv_softc *sc, struct gv_drive *d, int flags)
{
struct g_consumer *cp;
struct gv_freelist *fl, *fl2;
struct gv_plex *p;
struct gv_sd *s, *s2;
struct gv_volume *v;
struct gv_drive *d2;
int err;
KASSERT(d != NULL, ("gv_rm_drive: NULL d"));
cp = d->consumer;
if (cp != NULL) {
g_topology_lock();
err = g_access(cp, 0, 1, 0);
g_topology_unlock();
if (err) {
G_VINUM_DEBUG(0, "%s: couldn't access '%s', "
"errno: %d", __func__, cp->provider->name, err);
return;
}
/* Clear the Vinum Magic. */
d->hdr->magic = GV_NOMAGIC;
err = gv_write_header(cp, d->hdr);
if (err)
G_VINUM_DEBUG(0, "gv_rm_drive: couldn't write header to"
" '%s', errno: %d", cp->provider->name, err);
g_topology_lock();
g_access(cp, -cp->acr, -cp->acw, -cp->ace);
g_detach(cp);
g_destroy_consumer(cp);
g_topology_unlock();
}
/* Remove all associated subdisks, plexes, volumes. */
if (flags & GV_FLAG_R) {
if (!LIST_EMPTY(&d->subdisks)) {
LIST_FOREACH_SAFE(s, &d->subdisks, from_drive, s2) {
p = s->plex_sc;
if (p != NULL) {
v = p->vol_sc;
if (v != NULL)
gv_rm_vol(sc, v);
}
}
}
}
/* Clean up. */
LIST_FOREACH_SAFE(fl, &d->freelist, freelist, fl2) {
LIST_REMOVE(fl, freelist);
g_free(fl);
}
LIST_REMOVE(d, drive);
g_free(d->hdr);
/* Put ourself into referenced state if we have subdisks. */
if (d->sdcount > 0) {
d->consumer = NULL;
d->hdr = NULL;
d->flags |= GV_DRIVE_REFERENCED;
snprintf(d->device, sizeof(d->device), "???");
d->size = 0;
d->avail = 0;
d->freelist_entries = 0;
LIST_FOREACH(s, &d->subdisks, from_drive) {
s->flags |= GV_SD_TASTED;
gv_set_sd_state(s, GV_SD_DOWN, GV_SETSTATE_FORCE);
}
/* Shuffle around so we keep gv_is_newer happy. */
LIST_REMOVE(d, drive);
d2 = LIST_FIRST(&sc->drives);
if (d2 == NULL)
LIST_INSERT_HEAD(&sc->drives, d, drive);
else
LIST_INSERT_AFTER(d2, d, drive);
return;
}
g_free(d);
gv_save_config(sc);
}