05c1c03afa
- Updated all files with 2015 Avago copyright, and updated LSI's copyright dates. - Changed all of the PCI device strings from LSI to Avago Technologies (LSI). - Added a sysctl variable to control how StartStopUnit behavior works. User can select to spin down disks based on if disk is SSD or HDD. - Inquiry data is required to tell if a disk will support SSU at shutdown or not. Due to the addition of mpssas_async, which gets Advanced Info but not Inquiry data, the setting of supports_SSU was moved to the mpssas_scsiio_complete function, which snoops for any Inquiry commands. And, since disks are shutdown as a target and not a LUN, this process was simplified by basing it on targets and not LUNs. - Added a sysctl variable that sets the amount of time to retry after sending a failed SATA ID command. This helps with some bad disks and large disks that require a lot of time to spin up. Part of this change was to add a callout to handle timeouts with the SATA ID command. The callout function is called mpssas_ata_id_timeout(). (Fixes PR 191348) - Changed the way resets work by allowing I/O to continue to devices that are not currently under a reset condition. This uses devq's instead of simq's and makes use of the MPSSAS_TARGET_INRESET flag. This change also adds a function called mpssas_prepare_tm(). - Some changes were made to reduce code duplication when getting a SAS address for a SATA disk. - Fixed some formatting and whitespace. - Bump version of mps driver to 9.255.01.00-fbsd PR: 191348 Reviewed by: ken, scottl Approved by: ken, scottl MFC after: 1 week
2268 lines
69 KiB
C
2268 lines
69 KiB
C
/*-
|
|
* Copyright (c) 2011-2015 LSI Corp.
|
|
* Copyright (c) 2013-2015 Avago Technologies
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/* TODO Move headers to mprvar */
|
|
#include <sys/types.h>
|
|
#include <sys/param.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kthread.h>
|
|
#include <sys/taskqueue.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/eventhandler.h>
|
|
#include <sys/uio.h>
|
|
#include <machine/bus.h>
|
|
#include <machine/resource.h>
|
|
#include <dev/mpr/mpi/mpi2_type.h>
|
|
#include <dev/mpr/mpi/mpi2.h>
|
|
#include <dev/mpr/mpi/mpi2_ioc.h>
|
|
#include <dev/mpr/mpi/mpi2_sas.h>
|
|
#include <dev/mpr/mpi/mpi2_cnfg.h>
|
|
#include <dev/mpr/mpi/mpi2_init.h>
|
|
#include <dev/mpr/mpi/mpi2_tool.h>
|
|
#include <dev/mpr/mpr_ioctl.h>
|
|
#include <dev/mpr/mprvar.h>
|
|
#include <dev/mpr/mpr_mapping.h>
|
|
|
|
/**
|
|
* _mapping_clear_entry - Clear a particular mapping entry.
|
|
* @map_entry: map table entry
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
static inline void
|
|
_mapping_clear_map_entry(struct dev_mapping_table *map_entry)
|
|
{
|
|
map_entry->physical_id = 0;
|
|
map_entry->device_info = 0;
|
|
map_entry->phy_bits = 0;
|
|
map_entry->dpm_entry_num = MPR_DPM_BAD_IDX;
|
|
map_entry->dev_handle = 0;
|
|
map_entry->channel = -1;
|
|
map_entry->id = -1;
|
|
map_entry->missing_count = 0;
|
|
map_entry->init_complete = 0;
|
|
map_entry->TLR_bits = (u8)MPI2_SCSIIO_CONTROL_NO_TLR;
|
|
}
|
|
|
|
/**
|
|
* _mapping_clear_enc_entry - Clear a particular enclosure table entry.
|
|
* @enc_entry: enclosure table entry
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
static inline void
|
|
_mapping_clear_enc_entry(struct enc_mapping_table *enc_entry)
|
|
{
|
|
enc_entry->enclosure_id = 0;
|
|
enc_entry->start_index = MPR_MAPTABLE_BAD_IDX;
|
|
enc_entry->phy_bits = 0;
|
|
enc_entry->dpm_entry_num = MPR_DPM_BAD_IDX;
|
|
enc_entry->enc_handle = 0;
|
|
enc_entry->num_slots = 0;
|
|
enc_entry->start_slot = 0;
|
|
enc_entry->missing_count = 0;
|
|
enc_entry->removal_flag = 0;
|
|
enc_entry->skip_search = 0;
|
|
enc_entry->init_complete = 0;
|
|
}
|
|
|
|
/**
|
|
* _mapping_commit_enc_entry - write a particular enc entry in DPM page0.
|
|
* @sc: per adapter object
|
|
* @enc_entry: enclosure table entry
|
|
*
|
|
* Returns 0 for success, non-zero for failure.
|
|
*/
|
|
static int
|
|
_mapping_commit_enc_entry(struct mpr_softc *sc,
|
|
struct enc_mapping_table *et_entry)
|
|
{
|
|
Mpi2DriverMap0Entry_t *dpm_entry;
|
|
struct dev_mapping_table *mt_entry;
|
|
Mpi2ConfigReply_t mpi_reply;
|
|
Mpi2DriverMappingPage0_t config_page;
|
|
|
|
if (!sc->is_dpm_enable)
|
|
return 0;
|
|
|
|
memset(&config_page, 0, sizeof(Mpi2DriverMappingPage0_t));
|
|
memcpy(&config_page.Header, (u8 *) sc->dpm_pg0,
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 +
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
dpm_entry += et_entry->dpm_entry_num;
|
|
dpm_entry->PhysicalIdentifier.Low =
|
|
( 0xFFFFFFFF & et_entry->enclosure_id);
|
|
dpm_entry->PhysicalIdentifier.High =
|
|
( et_entry->enclosure_id >> 32);
|
|
mt_entry = &sc->mapping_table[et_entry->start_index];
|
|
dpm_entry->DeviceIndex = htole16(mt_entry->id);
|
|
dpm_entry->MappingInformation = et_entry->num_slots;
|
|
dpm_entry->MappingInformation <<= MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT;
|
|
dpm_entry->MappingInformation |= et_entry->missing_count;
|
|
dpm_entry->MappingInformation = htole16(dpm_entry->MappingInformation);
|
|
dpm_entry->PhysicalBitsMapping = htole32(et_entry->phy_bits);
|
|
dpm_entry->Reserved1 = 0;
|
|
|
|
memcpy(&config_page.Entry, (u8 *)dpm_entry,
|
|
sizeof(Mpi2DriverMap0Entry_t));
|
|
if (mpr_config_set_dpm_pg0(sc, &mpi_reply, &config_page,
|
|
et_entry->dpm_entry_num)) {
|
|
printf("%s: write of dpm entry %d for enclosure failed\n",
|
|
__func__, et_entry->dpm_entry_num);
|
|
dpm_entry->MappingInformation = le16toh(dpm_entry->
|
|
MappingInformation);
|
|
dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex);
|
|
dpm_entry->PhysicalBitsMapping =
|
|
le32toh(dpm_entry->PhysicalBitsMapping);
|
|
return -1;
|
|
}
|
|
dpm_entry->MappingInformation = le16toh(dpm_entry->
|
|
MappingInformation);
|
|
dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex);
|
|
dpm_entry->PhysicalBitsMapping =
|
|
le32toh(dpm_entry->PhysicalBitsMapping);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _mapping_commit_map_entry - write a particular map table entry in DPM page0.
|
|
* @sc: per adapter object
|
|
* @enc_entry: enclosure table entry
|
|
*
|
|
* Returns 0 for success, non-zero for failure.
|
|
*/
|
|
|
|
static int
|
|
_mapping_commit_map_entry(struct mpr_softc *sc,
|
|
struct dev_mapping_table *mt_entry)
|
|
{
|
|
Mpi2DriverMap0Entry_t *dpm_entry;
|
|
Mpi2ConfigReply_t mpi_reply;
|
|
Mpi2DriverMappingPage0_t config_page;
|
|
|
|
if (!sc->is_dpm_enable)
|
|
return 0;
|
|
|
|
memset(&config_page, 0, sizeof(Mpi2DriverMappingPage0_t));
|
|
memcpy(&config_page.Header, (u8 *)sc->dpm_pg0,
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *) sc->dpm_pg0 +
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
dpm_entry = dpm_entry + mt_entry->dpm_entry_num;
|
|
dpm_entry->PhysicalIdentifier.Low = (0xFFFFFFFF &
|
|
mt_entry->physical_id);
|
|
dpm_entry->PhysicalIdentifier.High = (mt_entry->physical_id >> 32);
|
|
dpm_entry->DeviceIndex = htole16(mt_entry->id);
|
|
dpm_entry->MappingInformation = htole16(mt_entry->missing_count);
|
|
dpm_entry->PhysicalBitsMapping = 0;
|
|
dpm_entry->Reserved1 = 0;
|
|
dpm_entry->MappingInformation = htole16(dpm_entry->MappingInformation);
|
|
memcpy(&config_page.Entry, (u8 *)dpm_entry,
|
|
sizeof(Mpi2DriverMap0Entry_t));
|
|
if (mpr_config_set_dpm_pg0(sc, &mpi_reply, &config_page,
|
|
mt_entry->dpm_entry_num)) {
|
|
printf("%s: write of dpm entry %d for device failed\n",
|
|
__func__, mt_entry->dpm_entry_num);
|
|
dpm_entry->MappingInformation = le16toh(dpm_entry->
|
|
MappingInformation);
|
|
dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex);
|
|
return -1;
|
|
}
|
|
|
|
dpm_entry->MappingInformation = le16toh(dpm_entry->MappingInformation);
|
|
dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex);
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_ir_maprange - get start and end index for IR map range.
|
|
* @sc: per adapter object
|
|
* @start_idx: place holder for start index
|
|
* @end_idx: place holder for end index
|
|
*
|
|
* The IR volumes can be mapped either at start or end of the mapping table
|
|
* this function gets the detail of where IR volume mapping starts and ends
|
|
* in the device mapping table
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
static void
|
|
_mapping_get_ir_maprange(struct mpr_softc *sc, u32 *start_idx, u32 *end_idx)
|
|
{
|
|
u16 volume_mapping_flags;
|
|
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
|
|
|
|
volume_mapping_flags = le16toh(sc->ioc_pg8.IRVolumeMappingFlags) &
|
|
MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
|
|
if (volume_mapping_flags == MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) {
|
|
*start_idx = 0;
|
|
if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0)
|
|
*start_idx = 1;
|
|
} else
|
|
*start_idx = sc->max_devices - sc->max_volumes;
|
|
*end_idx = *start_idx + sc->max_volumes - 1;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_enc_idx_from_id - get enclosure index from enclosure ID
|
|
* @sc: per adapter object
|
|
* @enc_id: enclosure logical identifier
|
|
*
|
|
* Returns the index of enclosure entry on success or bad index.
|
|
*/
|
|
static u8
|
|
_mapping_get_enc_idx_from_id(struct mpr_softc *sc, u64 enc_id,
|
|
u64 phy_bits)
|
|
{
|
|
struct enc_mapping_table *et_entry;
|
|
u8 enc_idx = 0;
|
|
|
|
for (enc_idx = 0; enc_idx < sc->num_enc_table_entries; enc_idx++) {
|
|
et_entry = &sc->enclosure_table[enc_idx];
|
|
if ((et_entry->enclosure_id == le64toh(enc_id)) &&
|
|
(!et_entry->phy_bits || (et_entry->phy_bits &
|
|
le32toh(phy_bits))))
|
|
return enc_idx;
|
|
}
|
|
return MPR_ENCTABLE_BAD_IDX;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_enc_idx_from_handle - get enclosure index from handle
|
|
* @sc: per adapter object
|
|
* @enc_id: enclosure handle
|
|
*
|
|
* Returns the index of enclosure entry on success or bad index.
|
|
*/
|
|
static u8
|
|
_mapping_get_enc_idx_from_handle(struct mpr_softc *sc, u16 handle)
|
|
{
|
|
struct enc_mapping_table *et_entry;
|
|
u8 enc_idx = 0;
|
|
|
|
for (enc_idx = 0; enc_idx < sc->num_enc_table_entries; enc_idx++) {
|
|
et_entry = &sc->enclosure_table[enc_idx];
|
|
if (et_entry->missing_count)
|
|
continue;
|
|
if (et_entry->enc_handle == handle)
|
|
return enc_idx;
|
|
}
|
|
return MPR_ENCTABLE_BAD_IDX;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_high_missing_et_idx - get missing enclosure index
|
|
* @sc: per adapter object
|
|
*
|
|
* Search through the enclosure table and identifies the enclosure entry
|
|
* with high missing count and returns it's index
|
|
*
|
|
* Returns the index of enclosure entry on success or bad index.
|
|
*/
|
|
static u8
|
|
_mapping_get_high_missing_et_idx(struct mpr_softc *sc)
|
|
{
|
|
struct enc_mapping_table *et_entry;
|
|
u8 high_missing_count = 0;
|
|
u8 enc_idx, high_idx = MPR_ENCTABLE_BAD_IDX;
|
|
|
|
for (enc_idx = 0; enc_idx < sc->num_enc_table_entries; enc_idx++) {
|
|
et_entry = &sc->enclosure_table[enc_idx];
|
|
if ((et_entry->missing_count > high_missing_count) &&
|
|
!et_entry->skip_search) {
|
|
high_missing_count = et_entry->missing_count;
|
|
high_idx = enc_idx;
|
|
}
|
|
}
|
|
return high_idx;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_high_missing_mt_idx - get missing map table index
|
|
* @sc: per adapter object
|
|
*
|
|
* Search through the map table and identifies the device entry
|
|
* with high missing count and returns it's index
|
|
*
|
|
* Returns the index of map table entry on success or bad index.
|
|
*/
|
|
static u32
|
|
_mapping_get_high_missing_mt_idx(struct mpr_softc *sc)
|
|
{
|
|
u32 map_idx, high_idx = MPR_ENCTABLE_BAD_IDX;
|
|
u8 high_missing_count = 0;
|
|
u32 start_idx, end_idx, start_idx_ir, end_idx_ir;
|
|
struct dev_mapping_table *mt_entry;
|
|
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
|
|
|
|
start_idx = 0;
|
|
start_idx_ir = 0;
|
|
end_idx_ir = 0;
|
|
end_idx = sc->max_devices;
|
|
if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0)
|
|
start_idx = 1;
|
|
if (sc->ir_firmware) {
|
|
_mapping_get_ir_maprange(sc, &start_idx_ir, &end_idx_ir);
|
|
if (start_idx == start_idx_ir)
|
|
start_idx = end_idx_ir + 1;
|
|
else
|
|
end_idx = start_idx_ir;
|
|
}
|
|
mt_entry = &sc->mapping_table[start_idx];
|
|
for (map_idx = start_idx; map_idx < end_idx; map_idx++, mt_entry++) {
|
|
if (mt_entry->missing_count > high_missing_count) {
|
|
high_missing_count = mt_entry->missing_count;
|
|
high_idx = map_idx;
|
|
}
|
|
}
|
|
return high_idx;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_ir_mt_idx_from_wwid - get map table index from volume WWID
|
|
* @sc: per adapter object
|
|
* @wwid: world wide unique ID of the volume
|
|
*
|
|
* Returns the index of map table entry on success or bad index.
|
|
*/
|
|
static u32
|
|
_mapping_get_ir_mt_idx_from_wwid(struct mpr_softc *sc, u64 wwid)
|
|
{
|
|
u32 start_idx, end_idx, map_idx;
|
|
struct dev_mapping_table *mt_entry;
|
|
|
|
_mapping_get_ir_maprange(sc, &start_idx, &end_idx);
|
|
mt_entry = &sc->mapping_table[start_idx];
|
|
for (map_idx = start_idx; map_idx <= end_idx; map_idx++, mt_entry++)
|
|
if (mt_entry->physical_id == wwid)
|
|
return map_idx;
|
|
|
|
return MPR_MAPTABLE_BAD_IDX;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_mt_idx_from_id - get map table index from a device ID
|
|
* @sc: per adapter object
|
|
* @dev_id: device identifer (SAS Address)
|
|
*
|
|
* Returns the index of map table entry on success or bad index.
|
|
*/
|
|
static u32
|
|
_mapping_get_mt_idx_from_id(struct mpr_softc *sc, u64 dev_id)
|
|
{
|
|
u32 map_idx;
|
|
struct dev_mapping_table *mt_entry;
|
|
|
|
for (map_idx = 0; map_idx < sc->max_devices; map_idx++) {
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if (mt_entry->physical_id == dev_id)
|
|
return map_idx;
|
|
}
|
|
return MPR_MAPTABLE_BAD_IDX;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_ir_mt_idx_from_handle - get map table index from volume handle
|
|
* @sc: per adapter object
|
|
* @wwid: volume device handle
|
|
*
|
|
* Returns the index of map table entry on success or bad index.
|
|
*/
|
|
static u32
|
|
_mapping_get_ir_mt_idx_from_handle(struct mpr_softc *sc, u16 volHandle)
|
|
{
|
|
u32 start_idx, end_idx, map_idx;
|
|
struct dev_mapping_table *mt_entry;
|
|
|
|
_mapping_get_ir_maprange(sc, &start_idx, &end_idx);
|
|
mt_entry = &sc->mapping_table[start_idx];
|
|
for (map_idx = start_idx; map_idx <= end_idx; map_idx++, mt_entry++)
|
|
if (mt_entry->dev_handle == volHandle)
|
|
return map_idx;
|
|
|
|
return MPR_MAPTABLE_BAD_IDX;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_mt_idx_from_handle - get map table index from handle
|
|
* @sc: per adapter object
|
|
* @dev_id: device handle
|
|
*
|
|
* Returns the index of map table entry on success or bad index.
|
|
*/
|
|
static u32
|
|
_mapping_get_mt_idx_from_handle(struct mpr_softc *sc, u16 handle)
|
|
{
|
|
u32 map_idx;
|
|
struct dev_mapping_table *mt_entry;
|
|
|
|
for (map_idx = 0; map_idx < sc->max_devices; map_idx++) {
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if (mt_entry->dev_handle == handle)
|
|
return map_idx;
|
|
}
|
|
return MPR_MAPTABLE_BAD_IDX;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_free_ir_mt_idx - get first free index for a volume
|
|
* @sc: per adapter object
|
|
*
|
|
* Search through mapping table for free index for a volume and if no free
|
|
* index then looks for a volume with high mapping index
|
|
*
|
|
* Returns the index of map table entry on success or bad index.
|
|
*/
|
|
static u32
|
|
_mapping_get_free_ir_mt_idx(struct mpr_softc *sc)
|
|
{
|
|
u8 high_missing_count = 0;
|
|
u32 start_idx, end_idx, map_idx;
|
|
u32 high_idx = MPR_MAPTABLE_BAD_IDX;
|
|
struct dev_mapping_table *mt_entry;
|
|
|
|
_mapping_get_ir_maprange(sc, &start_idx, &end_idx);
|
|
|
|
mt_entry = &sc->mapping_table[start_idx];
|
|
for (map_idx = start_idx; map_idx <= end_idx; map_idx++, mt_entry++)
|
|
if (!(mt_entry->device_info & MPR_MAP_IN_USE))
|
|
return map_idx;
|
|
|
|
mt_entry = &sc->mapping_table[start_idx];
|
|
for (map_idx = start_idx; map_idx <= end_idx; map_idx++, mt_entry++) {
|
|
if (mt_entry->missing_count > high_missing_count) {
|
|
high_missing_count = mt_entry->missing_count;
|
|
high_idx = map_idx;
|
|
}
|
|
}
|
|
return high_idx;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_free_mt_idx - get first free index for a device
|
|
* @sc: per adapter object
|
|
* @start_idx: offset in the table to start search
|
|
*
|
|
* Returns the index of map table entry on success or bad index.
|
|
*/
|
|
static u32
|
|
_mapping_get_free_mt_idx(struct mpr_softc *sc, u32 start_idx)
|
|
{
|
|
u32 map_idx, max_idx = sc->max_devices;
|
|
struct dev_mapping_table *mt_entry = &sc->mapping_table[start_idx];
|
|
u16 volume_mapping_flags;
|
|
|
|
volume_mapping_flags = le16toh(sc->ioc_pg8.IRVolumeMappingFlags) &
|
|
MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
|
|
if (sc->ir_firmware && (volume_mapping_flags ==
|
|
MPI2_IOCPAGE8_IRFLAGS_HIGH_VOLUME_MAPPING))
|
|
max_idx -= sc->max_volumes;
|
|
for (map_idx = start_idx; map_idx < max_idx; map_idx++, mt_entry++)
|
|
if (!(mt_entry->device_info & (MPR_MAP_IN_USE |
|
|
MPR_DEV_RESERVED)))
|
|
return map_idx;
|
|
|
|
return MPR_MAPTABLE_BAD_IDX;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_dpm_idx_from_id - get DPM index from ID
|
|
* @sc: per adapter object
|
|
* @id: volume WWID or enclosure ID or device ID
|
|
*
|
|
* Returns the index of DPM entry on success or bad index.
|
|
*/
|
|
static u16
|
|
_mapping_get_dpm_idx_from_id(struct mpr_softc *sc, u64 id, u32 phy_bits)
|
|
{
|
|
u16 entry_num;
|
|
uint64_t PhysicalIdentifier;
|
|
Mpi2DriverMap0Entry_t *dpm_entry;
|
|
|
|
dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 +
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
PhysicalIdentifier = dpm_entry->PhysicalIdentifier.High;
|
|
PhysicalIdentifier = (PhysicalIdentifier << 32) |
|
|
dpm_entry->PhysicalIdentifier.Low;
|
|
for (entry_num = 0; entry_num < sc->max_dpm_entries; entry_num++,
|
|
dpm_entry++)
|
|
if ((id == PhysicalIdentifier) &&
|
|
(!phy_bits || !dpm_entry->PhysicalBitsMapping ||
|
|
(phy_bits & dpm_entry->PhysicalBitsMapping)))
|
|
return entry_num;
|
|
|
|
return MPR_DPM_BAD_IDX;
|
|
}
|
|
|
|
|
|
/**
|
|
* _mapping_get_free_dpm_idx - get first available DPM index
|
|
* @sc: per adapter object
|
|
*
|
|
* Returns the index of DPM entry on success or bad index.
|
|
*/
|
|
static u32
|
|
_mapping_get_free_dpm_idx(struct mpr_softc *sc)
|
|
{
|
|
u16 entry_num;
|
|
|
|
for (entry_num = 0; entry_num < sc->max_dpm_entries; entry_num++) {
|
|
if (!sc->dpm_entry_used[entry_num])
|
|
return entry_num;
|
|
}
|
|
return MPR_DPM_BAD_IDX;
|
|
}
|
|
|
|
/**
|
|
* _mapping_update_ir_missing_cnt - Updates missing count for a volume
|
|
* @sc: per adapter object
|
|
* @map_idx: map table index of the volume
|
|
* @element: IR configuration change element
|
|
* @wwid: IR volume ID.
|
|
*
|
|
* Updates the missing count in the map table and in the DPM entry for a volume
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
static void
|
|
_mapping_update_ir_missing_cnt(struct mpr_softc *sc, u32 map_idx,
|
|
Mpi2EventIrConfigElement_t *element, u64 wwid)
|
|
{
|
|
struct dev_mapping_table *mt_entry;
|
|
u8 missing_cnt, reason = element->ReasonCode;
|
|
u16 dpm_idx;
|
|
Mpi2DriverMap0Entry_t *dpm_entry;
|
|
|
|
if (!sc->is_dpm_enable)
|
|
return;
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if (reason == MPI2_EVENT_IR_CHANGE_RC_ADDED) {
|
|
mt_entry->missing_count = 0;
|
|
} else if (reason == MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED) {
|
|
mt_entry->missing_count = 0;
|
|
mt_entry->init_complete = 0;
|
|
} else if ((reason == MPI2_EVENT_IR_CHANGE_RC_REMOVED) ||
|
|
(reason == MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED)) {
|
|
if (!mt_entry->init_complete) {
|
|
if (mt_entry->missing_count < MPR_MAX_MISSING_COUNT)
|
|
mt_entry->missing_count++;
|
|
else
|
|
mt_entry->init_complete = 1;
|
|
}
|
|
if (!mt_entry->missing_count)
|
|
mt_entry->missing_count++;
|
|
mt_entry->dev_handle = 0;
|
|
}
|
|
|
|
dpm_idx = mt_entry->dpm_entry_num;
|
|
if (dpm_idx == MPR_DPM_BAD_IDX) {
|
|
if ((reason == MPI2_EVENT_IR_CHANGE_RC_ADDED) ||
|
|
(reason == MPI2_EVENT_IR_CHANGE_RC_REMOVED))
|
|
dpm_idx = _mapping_get_dpm_idx_from_id(sc,
|
|
mt_entry->physical_id, 0);
|
|
else if (reason == MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED)
|
|
return;
|
|
}
|
|
if (dpm_idx != MPR_DPM_BAD_IDX) {
|
|
dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 +
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
dpm_entry += dpm_idx;
|
|
missing_cnt = dpm_entry->MappingInformation &
|
|
MPI2_DRVMAP0_MAPINFO_MISSING_MASK;
|
|
if ((mt_entry->physical_id ==
|
|
le64toh((u64)dpm_entry->PhysicalIdentifier.High |
|
|
dpm_entry->PhysicalIdentifier.Low)) && (missing_cnt ==
|
|
mt_entry->missing_count))
|
|
mt_entry->init_complete = 1;
|
|
} else {
|
|
dpm_idx = _mapping_get_free_dpm_idx(sc);
|
|
mt_entry->init_complete = 0;
|
|
}
|
|
|
|
if ((dpm_idx != MPR_DPM_BAD_IDX) && !mt_entry->init_complete) {
|
|
mt_entry->init_complete = 1;
|
|
mt_entry->dpm_entry_num = dpm_idx;
|
|
dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 +
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
dpm_entry += dpm_idx;
|
|
dpm_entry->PhysicalIdentifier.Low =
|
|
(0xFFFFFFFF & mt_entry->physical_id);
|
|
dpm_entry->PhysicalIdentifier.High =
|
|
(mt_entry->physical_id >> 32);
|
|
dpm_entry->DeviceIndex = map_idx;
|
|
dpm_entry->MappingInformation = mt_entry->missing_count;
|
|
dpm_entry->PhysicalBitsMapping = 0;
|
|
dpm_entry->Reserved1 = 0;
|
|
sc->dpm_flush_entry[dpm_idx] = 1;
|
|
sc->dpm_entry_used[dpm_idx] = 1;
|
|
} else if (dpm_idx == MPR_DPM_BAD_IDX) {
|
|
printf("%s: no space to add entry in DPM table\n", __func__);
|
|
mt_entry->init_complete = 1;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* _mapping_add_to_removal_table - mark an entry for removal
|
|
* @sc: per adapter object
|
|
* @handle: Handle of enclosures/device/volume
|
|
*
|
|
* Adds the handle or DPM entry number in removal table.
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
static void
|
|
_mapping_add_to_removal_table(struct mpr_softc *sc, u16 handle,
|
|
u16 dpm_idx)
|
|
{
|
|
struct map_removal_table *remove_entry;
|
|
u32 i;
|
|
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
|
|
|
|
remove_entry = sc->removal_table;
|
|
|
|
for (i = 0; i < sc->max_devices; i++, remove_entry++) {
|
|
if (remove_entry->dev_handle || remove_entry->dpm_entry_num !=
|
|
MPR_DPM_BAD_IDX)
|
|
continue;
|
|
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
|
|
if (dpm_idx)
|
|
remove_entry->dpm_entry_num = dpm_idx;
|
|
if (remove_entry->dpm_entry_num == MPR_DPM_BAD_IDX)
|
|
remove_entry->dev_handle = handle;
|
|
} else if ((ioc_pg8_flags &
|
|
MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING)
|
|
remove_entry->dev_handle = handle;
|
|
break;
|
|
}
|
|
|
|
}
|
|
|
|
/**
|
|
* _mapping_update_missing_count - Update missing count for a device
|
|
* @sc: per adapter object
|
|
* @topo_change: Topology change event entry
|
|
*
|
|
* Search through the topology change list and if any device is found not
|
|
* responding it's associated map table entry and DPM entry is updated
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
static void
|
|
_mapping_update_missing_count(struct mpr_softc *sc,
|
|
struct _map_topology_change *topo_change)
|
|
{
|
|
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
|
|
u8 entry;
|
|
struct _map_phy_change *phy_change;
|
|
u32 map_idx;
|
|
struct dev_mapping_table *mt_entry;
|
|
Mpi2DriverMap0Entry_t *dpm_entry;
|
|
|
|
for (entry = 0; entry < topo_change->num_entries; entry++) {
|
|
phy_change = &topo_change->phy_details[entry];
|
|
if (!phy_change->dev_handle || (phy_change->reason !=
|
|
MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING))
|
|
continue;
|
|
map_idx = _mapping_get_mt_idx_from_handle(sc, phy_change->
|
|
dev_handle);
|
|
phy_change->is_processed = 1;
|
|
if (map_idx == MPR_MAPTABLE_BAD_IDX) {
|
|
printf("%s: device is already removed from mapping "
|
|
"table\n", __func__);
|
|
continue;
|
|
}
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if (!mt_entry->init_complete) {
|
|
if (mt_entry->missing_count < MPR_MAX_MISSING_COUNT)
|
|
mt_entry->missing_count++;
|
|
else
|
|
mt_entry->init_complete = 1;
|
|
}
|
|
if (!mt_entry->missing_count)
|
|
mt_entry->missing_count++;
|
|
_mapping_add_to_removal_table(sc, mt_entry->dev_handle, 0);
|
|
mt_entry->dev_handle = 0;
|
|
|
|
if (((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) &&
|
|
sc->is_dpm_enable && !mt_entry->init_complete &&
|
|
mt_entry->dpm_entry_num != MPR_DPM_BAD_IDX) {
|
|
dpm_entry =
|
|
(Mpi2DriverMap0Entry_t *) ((u8 *)sc->dpm_pg0 +
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
dpm_entry += mt_entry->dpm_entry_num;
|
|
dpm_entry->MappingInformation = mt_entry->missing_count;
|
|
sc->dpm_flush_entry[mt_entry->dpm_entry_num] = 1;
|
|
}
|
|
mt_entry->init_complete = 1;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* _mapping_find_enc_map_space -find map table entries for enclosure
|
|
* @sc: per adapter object
|
|
* @et_entry: enclosure entry
|
|
*
|
|
* Search through the mapping table defragment it and provide contiguous
|
|
* space in map table for a particular enclosure entry
|
|
*
|
|
* Returns start index in map table or bad index.
|
|
*/
|
|
static u32
|
|
_mapping_find_enc_map_space(struct mpr_softc *sc,
|
|
struct enc_mapping_table *et_entry)
|
|
{
|
|
u16 vol_mapping_flags;
|
|
u32 skip_count, end_of_table, map_idx, enc_idx;
|
|
u16 num_found;
|
|
u32 start_idx = MPR_MAPTABLE_BAD_IDX;
|
|
struct dev_mapping_table *mt_entry;
|
|
struct enc_mapping_table *enc_entry;
|
|
unsigned char done_flag = 0, found_space;
|
|
u16 max_num_phy_ids = le16toh(sc->ioc_pg8.MaxNumPhysicalMappedIDs);
|
|
|
|
skip_count = sc->num_rsvd_entries;
|
|
num_found = 0;
|
|
|
|
vol_mapping_flags = le16toh(sc->ioc_pg8.IRVolumeMappingFlags) &
|
|
MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
|
|
|
|
if (!sc->ir_firmware)
|
|
end_of_table = sc->max_devices;
|
|
else if (vol_mapping_flags == MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING)
|
|
end_of_table = sc->max_devices;
|
|
else
|
|
end_of_table = sc->max_devices - sc->max_volumes;
|
|
|
|
for (map_idx = (max_num_phy_ids + skip_count);
|
|
map_idx < end_of_table; map_idx++) {
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if ((et_entry->enclosure_id == mt_entry->physical_id) &&
|
|
(!mt_entry->phy_bits || (mt_entry->phy_bits &
|
|
et_entry->phy_bits))) {
|
|
num_found += 1;
|
|
if (num_found == et_entry->num_slots) {
|
|
start_idx = (map_idx - num_found) + 1;
|
|
return start_idx;
|
|
}
|
|
} else
|
|
num_found = 0;
|
|
}
|
|
for (map_idx = (max_num_phy_ids + skip_count);
|
|
map_idx < end_of_table; map_idx++) {
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if (!(mt_entry->device_info & MPR_DEV_RESERVED)) {
|
|
num_found += 1;
|
|
if (num_found == et_entry->num_slots) {
|
|
start_idx = (map_idx - num_found) + 1;
|
|
return start_idx;
|
|
}
|
|
} else
|
|
num_found = 0;
|
|
}
|
|
|
|
while (!done_flag) {
|
|
enc_idx = _mapping_get_high_missing_et_idx(sc);
|
|
if (enc_idx == MPR_ENCTABLE_BAD_IDX)
|
|
return MPR_MAPTABLE_BAD_IDX;
|
|
enc_entry = &sc->enclosure_table[enc_idx];
|
|
/*VSP FIXME*/
|
|
enc_entry->skip_search = 1;
|
|
mt_entry = &sc->mapping_table[enc_entry->start_index];
|
|
for (map_idx = enc_entry->start_index; map_idx <
|
|
(enc_entry->start_index + enc_entry->num_slots); map_idx++,
|
|
mt_entry++)
|
|
mt_entry->device_info &= ~MPR_DEV_RESERVED;
|
|
found_space = 0;
|
|
for (map_idx = (max_num_phy_ids +
|
|
skip_count); map_idx < end_of_table; map_idx++) {
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if (!(mt_entry->device_info & MPR_DEV_RESERVED)) {
|
|
num_found += 1;
|
|
if (num_found == et_entry->num_slots) {
|
|
start_idx = (map_idx - num_found) + 1;
|
|
found_space = 1;
|
|
}
|
|
} else
|
|
num_found = 0;
|
|
}
|
|
|
|
if (!found_space)
|
|
continue;
|
|
for (map_idx = start_idx; map_idx < (start_idx + num_found);
|
|
map_idx++) {
|
|
enc_entry = sc->enclosure_table;
|
|
for (enc_idx = 0; enc_idx < sc->num_enc_table_entries;
|
|
enc_idx++, enc_entry++) {
|
|
if (map_idx < enc_entry->start_index ||
|
|
map_idx > (enc_entry->start_index +
|
|
enc_entry->num_slots))
|
|
continue;
|
|
if (!enc_entry->removal_flag) {
|
|
enc_entry->removal_flag = 1;
|
|
_mapping_add_to_removal_table(sc, 0,
|
|
enc_entry->dpm_entry_num);
|
|
}
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if (mt_entry->device_info &
|
|
MPR_MAP_IN_USE) {
|
|
_mapping_add_to_removal_table(sc,
|
|
mt_entry->dev_handle, 0);
|
|
_mapping_clear_map_entry(mt_entry);
|
|
}
|
|
if (map_idx == (enc_entry->start_index +
|
|
enc_entry->num_slots - 1))
|
|
_mapping_clear_enc_entry(et_entry);
|
|
}
|
|
}
|
|
enc_entry = sc->enclosure_table;
|
|
for (enc_idx = 0; enc_idx < sc->num_enc_table_entries;
|
|
enc_idx++, enc_entry++) {
|
|
if (!enc_entry->removal_flag) {
|
|
mt_entry = &sc->mapping_table[enc_entry->
|
|
start_index];
|
|
for (map_idx = enc_entry->start_index; map_idx <
|
|
(enc_entry->start_index +
|
|
enc_entry->num_slots); map_idx++,
|
|
mt_entry++)
|
|
mt_entry->device_info |=
|
|
MPR_DEV_RESERVED;
|
|
et_entry->skip_search = 0;
|
|
}
|
|
}
|
|
done_flag = 1;
|
|
}
|
|
return start_idx;
|
|
}
|
|
|
|
/**
|
|
* _mapping_get_dev_info -get information about newly added devices
|
|
* @sc: per adapter object
|
|
* @topo_change: Topology change event entry
|
|
*
|
|
* Search through the topology change event list and issues sas device pg0
|
|
* requests for the newly added device and reserved entries in tables
|
|
*
|
|
* Returns nothing
|
|
*/
|
|
static void
|
|
_mapping_get_dev_info(struct mpr_softc *sc,
|
|
struct _map_topology_change *topo_change)
|
|
{
|
|
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
|
|
Mpi2ConfigReply_t mpi_reply;
|
|
Mpi2SasDevicePage0_t sas_device_pg0;
|
|
u8 entry, enc_idx, phy_idx, sata_end_device;
|
|
u32 map_idx, index, device_info;
|
|
struct _map_phy_change *phy_change, *tmp_phy_change;
|
|
uint64_t sas_address;
|
|
struct enc_mapping_table *et_entry;
|
|
struct dev_mapping_table *mt_entry;
|
|
u8 add_code = MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED;
|
|
int rc = 1;
|
|
|
|
for (entry = 0; entry < topo_change->num_entries; entry++) {
|
|
phy_change = &topo_change->phy_details[entry];
|
|
if (phy_change->is_processed || !phy_change->dev_handle ||
|
|
phy_change->reason != MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED)
|
|
continue;
|
|
if (mpr_config_get_sas_device_pg0(sc, &mpi_reply,
|
|
&sas_device_pg0, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
|
|
phy_change->dev_handle)) {
|
|
phy_change->is_processed = 1;
|
|
continue;
|
|
}
|
|
|
|
/*
|
|
* Always get SATA Identify information because this is used
|
|
* to determine if Start/Stop Unit should be sent to the drive
|
|
* when the system is shutdown.
|
|
*/
|
|
device_info = le32toh(sas_device_pg0.DeviceInfo);
|
|
sas_address = sas_device_pg0.SASAddress.High;
|
|
sas_address = (sas_address << 32) |
|
|
sas_device_pg0.SASAddress.Low;
|
|
sata_end_device = 0;
|
|
if ((device_info & MPI2_SAS_DEVICE_INFO_END_DEVICE) &&
|
|
(device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE)) {
|
|
sata_end_device = 1;
|
|
rc = mprsas_get_sas_address_for_sata_disk(sc,
|
|
&sas_address, phy_change->dev_handle, device_info,
|
|
&phy_change->is_SATA_SSD);
|
|
if (rc) {
|
|
mpr_dprint(sc, MPR_ERROR, "%s: failed to get "
|
|
"disk type (SSD or HDD) and SAS Address "
|
|
"for SATA device with handle 0x%04x\n",
|
|
__func__, phy_change->dev_handle);
|
|
} else {
|
|
mpr_dprint(sc, MPR_INFO, "SAS Address for SATA "
|
|
"device = %jx\n", sas_address);
|
|
}
|
|
}
|
|
|
|
phy_change->physical_id = sas_address;
|
|
phy_change->slot = le16toh(sas_device_pg0.Slot);
|
|
phy_change->device_info = le32toh(sas_device_pg0.DeviceInfo);
|
|
|
|
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
|
|
enc_idx = _mapping_get_enc_idx_from_handle(sc,
|
|
topo_change->enc_handle);
|
|
if (enc_idx == MPR_ENCTABLE_BAD_IDX) {
|
|
phy_change->is_processed = 1;
|
|
mpr_dprint(sc, MPR_MAPPING, "%s: failed to add "
|
|
"the device with handle 0x%04x because the "
|
|
"enclosure is not in the mapping table\n",
|
|
__func__, phy_change->dev_handle);
|
|
continue;
|
|
}
|
|
if (!((phy_change->device_info &
|
|
MPI2_SAS_DEVICE_INFO_END_DEVICE) &&
|
|
(phy_change->device_info &
|
|
(MPI2_SAS_DEVICE_INFO_SSP_TARGET |
|
|
MPI2_SAS_DEVICE_INFO_STP_TARGET |
|
|
MPI2_SAS_DEVICE_INFO_SATA_DEVICE)))) {
|
|
phy_change->is_processed = 1;
|
|
continue;
|
|
}
|
|
et_entry = &sc->enclosure_table[enc_idx];
|
|
if (et_entry->start_index != MPR_MAPTABLE_BAD_IDX)
|
|
continue;
|
|
if (!topo_change->exp_handle) {
|
|
map_idx = sc->num_rsvd_entries;
|
|
et_entry->start_index = map_idx;
|
|
} else {
|
|
map_idx = _mapping_find_enc_map_space(sc,
|
|
et_entry);
|
|
et_entry->start_index = map_idx;
|
|
if (et_entry->start_index ==
|
|
MPR_MAPTABLE_BAD_IDX) {
|
|
phy_change->is_processed = 1;
|
|
for (phy_idx = 0; phy_idx <
|
|
topo_change->num_entries;
|
|
phy_idx++) {
|
|
tmp_phy_change =
|
|
&topo_change->phy_details
|
|
[phy_idx];
|
|
if (tmp_phy_change->reason ==
|
|
add_code)
|
|
tmp_phy_change->
|
|
is_processed = 1;
|
|
}
|
|
break;
|
|
}
|
|
}
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
for (index = map_idx; index < (et_entry->num_slots
|
|
+ map_idx); index++, mt_entry++) {
|
|
mt_entry->device_info = MPR_DEV_RESERVED;
|
|
mt_entry->physical_id = et_entry->enclosure_id;
|
|
mt_entry->phy_bits = et_entry->phy_bits;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* _mapping_set_mid_to_eid -set map table data from enclosure table
|
|
* @sc: per adapter object
|
|
* @et_entry: enclosure entry
|
|
*
|
|
* Returns nothing
|
|
*/
|
|
static inline void
|
|
_mapping_set_mid_to_eid(struct mpr_softc *sc,
|
|
struct enc_mapping_table *et_entry)
|
|
{
|
|
struct dev_mapping_table *mt_entry;
|
|
u16 slots = et_entry->num_slots, map_idx;
|
|
u32 start_idx = et_entry->start_index;
|
|
if (start_idx != MPR_MAPTABLE_BAD_IDX) {
|
|
mt_entry = &sc->mapping_table[start_idx];
|
|
for (map_idx = 0; map_idx < slots; map_idx++, mt_entry++)
|
|
mt_entry->physical_id = et_entry->enclosure_id;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* _mapping_clear_removed_entries - mark the entries to be cleared
|
|
* @sc: per adapter object
|
|
*
|
|
* Search through the removal table and mark the entries which needs to be
|
|
* flushed to DPM and also updates the map table and enclosure table by
|
|
* clearing the corresponding entries.
|
|
*
|
|
* Returns nothing
|
|
*/
|
|
static void
|
|
_mapping_clear_removed_entries(struct mpr_softc *sc)
|
|
{
|
|
u32 remove_idx;
|
|
struct map_removal_table *remove_entry;
|
|
Mpi2DriverMap0Entry_t *dpm_entry;
|
|
u8 done_flag = 0, num_entries, m, i;
|
|
struct enc_mapping_table *et_entry, *from, *to;
|
|
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
|
|
|
|
if (sc->is_dpm_enable) {
|
|
remove_entry = sc->removal_table;
|
|
for (remove_idx = 0; remove_idx < sc->max_devices;
|
|
remove_idx++, remove_entry++) {
|
|
if (remove_entry->dpm_entry_num != MPR_DPM_BAD_IDX) {
|
|
dpm_entry = (Mpi2DriverMap0Entry_t *)
|
|
((u8 *) sc->dpm_pg0 +
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
dpm_entry += remove_entry->dpm_entry_num;
|
|
dpm_entry->PhysicalIdentifier.Low = 0;
|
|
dpm_entry->PhysicalIdentifier.High = 0;
|
|
dpm_entry->DeviceIndex = 0;
|
|
dpm_entry->MappingInformation = 0;
|
|
dpm_entry->PhysicalBitsMapping = 0;
|
|
sc->dpm_flush_entry[remove_entry->
|
|
dpm_entry_num] = 1;
|
|
sc->dpm_entry_used[remove_entry->dpm_entry_num]
|
|
= 0;
|
|
remove_entry->dpm_entry_num = MPR_DPM_BAD_IDX;
|
|
}
|
|
}
|
|
}
|
|
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
|
|
num_entries = sc->num_enc_table_entries;
|
|
while (!done_flag) {
|
|
done_flag = 1;
|
|
et_entry = sc->enclosure_table;
|
|
for (i = 0; i < num_entries; i++, et_entry++) {
|
|
if (!et_entry->enc_handle && et_entry->
|
|
init_complete) {
|
|
done_flag = 0;
|
|
if (i != (num_entries - 1)) {
|
|
from = &sc->enclosure_table
|
|
[i+1];
|
|
to = &sc->enclosure_table[i];
|
|
for (m = i; m < (num_entries -
|
|
1); m++, from++, to++) {
|
|
_mapping_set_mid_to_eid
|
|
(sc, to);
|
|
*to = *from;
|
|
}
|
|
_mapping_clear_enc_entry(to);
|
|
sc->num_enc_table_entries--;
|
|
num_entries =
|
|
sc->num_enc_table_entries;
|
|
} else {
|
|
_mapping_clear_enc_entry
|
|
(et_entry);
|
|
sc->num_enc_table_entries--;
|
|
num_entries =
|
|
sc->num_enc_table_entries;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
/**
|
|
* _mapping_add_new_device -Add the new device into mapping table
|
|
* @sc: per adapter object
|
|
* @topo_change: Topology change event entry
|
|
*
|
|
* Search through the topology change event list and updates map table,
|
|
* enclosure table and DPM pages for for the newly added devices.
|
|
*
|
|
* Returns nothing
|
|
*/
|
|
static void
|
|
_mapping_add_new_device(struct mpr_softc *sc,
|
|
struct _map_topology_change *topo_change)
|
|
{
|
|
u8 enc_idx, missing_cnt, is_removed = 0;
|
|
u16 dpm_idx;
|
|
u32 search_idx, map_idx;
|
|
u32 entry;
|
|
struct dev_mapping_table *mt_entry;
|
|
struct enc_mapping_table *et_entry;
|
|
struct _map_phy_change *phy_change;
|
|
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
|
|
Mpi2DriverMap0Entry_t *dpm_entry;
|
|
uint64_t temp64_var;
|
|
u8 map_shift = MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT;
|
|
u8 hdr_sz = sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER);
|
|
u16 max_num_phy_ids = le16toh(sc->ioc_pg8.MaxNumPhysicalMappedIDs);
|
|
|
|
for (entry = 0; entry < topo_change->num_entries; entry++) {
|
|
phy_change = &topo_change->phy_details[entry];
|
|
if (phy_change->is_processed)
|
|
continue;
|
|
if (phy_change->reason != MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED ||
|
|
!phy_change->dev_handle) {
|
|
phy_change->is_processed = 1;
|
|
continue;
|
|
}
|
|
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
|
|
enc_idx = _mapping_get_enc_idx_from_handle
|
|
(sc, topo_change->enc_handle);
|
|
if (enc_idx == MPR_ENCTABLE_BAD_IDX) {
|
|
phy_change->is_processed = 1;
|
|
printf("%s: failed to add the device with "
|
|
"handle 0x%04x because the enclosure is "
|
|
"not in the mapping table\n", __func__,
|
|
phy_change->dev_handle);
|
|
continue;
|
|
}
|
|
et_entry = &sc->enclosure_table[enc_idx];
|
|
if (et_entry->start_index == MPR_MAPTABLE_BAD_IDX) {
|
|
phy_change->is_processed = 1;
|
|
if (!sc->mt_full_retry) {
|
|
sc->mt_add_device_failed = 1;
|
|
continue;
|
|
}
|
|
printf("%s: failed to add the device with "
|
|
"handle 0x%04x because there is no free "
|
|
"space available in the mapping table\n",
|
|
__func__, phy_change->dev_handle);
|
|
continue;
|
|
}
|
|
map_idx = et_entry->start_index + phy_change->slot -
|
|
et_entry->start_slot;
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
mt_entry->physical_id = phy_change->physical_id;
|
|
mt_entry->channel = 0;
|
|
mt_entry->id = map_idx;
|
|
mt_entry->dev_handle = phy_change->dev_handle;
|
|
mt_entry->missing_count = 0;
|
|
mt_entry->dpm_entry_num = et_entry->dpm_entry_num;
|
|
mt_entry->device_info = phy_change->device_info |
|
|
(MPR_DEV_RESERVED | MPR_MAP_IN_USE);
|
|
if (sc->is_dpm_enable) {
|
|
dpm_idx = et_entry->dpm_entry_num;
|
|
if (dpm_idx == MPR_DPM_BAD_IDX)
|
|
dpm_idx = _mapping_get_dpm_idx_from_id
|
|
(sc, et_entry->enclosure_id,
|
|
et_entry->phy_bits);
|
|
if (dpm_idx == MPR_DPM_BAD_IDX) {
|
|
dpm_idx = _mapping_get_free_dpm_idx(sc);
|
|
if (dpm_idx != MPR_DPM_BAD_IDX) {
|
|
dpm_entry =
|
|
(Mpi2DriverMap0Entry_t *)
|
|
((u8 *) sc->dpm_pg0 +
|
|
hdr_sz);
|
|
dpm_entry += dpm_idx;
|
|
dpm_entry->
|
|
PhysicalIdentifier.Low =
|
|
(0xFFFFFFFF &
|
|
et_entry->enclosure_id);
|
|
dpm_entry->
|
|
PhysicalIdentifier.High =
|
|
( et_entry->enclosure_id
|
|
>> 32);
|
|
dpm_entry->DeviceIndex =
|
|
(U16)et_entry->start_index;
|
|
dpm_entry->MappingInformation =
|
|
et_entry->num_slots;
|
|
dpm_entry->MappingInformation
|
|
<<= map_shift;
|
|
dpm_entry->PhysicalBitsMapping
|
|
= et_entry->phy_bits;
|
|
et_entry->dpm_entry_num =
|
|
dpm_idx;
|
|
/* FIXME Do I need to set the dpm_idxin mt_entry too */
|
|
sc->dpm_entry_used[dpm_idx] = 1;
|
|
sc->dpm_flush_entry[dpm_idx] =
|
|
1;
|
|
phy_change->is_processed = 1;
|
|
} else {
|
|
phy_change->is_processed = 1;
|
|
mpr_dprint(sc, MPR_INFO, "%s: "
|
|
"failed to add the device "
|
|
"with handle 0x%04x to "
|
|
"persistent table because "
|
|
"there is no free space "
|
|
"available\n", __func__,
|
|
phy_change->dev_handle);
|
|
}
|
|
} else {
|
|
et_entry->dpm_entry_num = dpm_idx;
|
|
mt_entry->dpm_entry_num = dpm_idx;
|
|
}
|
|
}
|
|
/* FIXME Why not mt_entry too? */
|
|
et_entry->init_complete = 1;
|
|
} else if ((ioc_pg8_flags &
|
|
MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) {
|
|
map_idx = _mapping_get_mt_idx_from_id
|
|
(sc, phy_change->physical_id);
|
|
if (map_idx == MPR_MAPTABLE_BAD_IDX) {
|
|
search_idx = sc->num_rsvd_entries;
|
|
if (topo_change->exp_handle)
|
|
search_idx += max_num_phy_ids;
|
|
map_idx = _mapping_get_free_mt_idx(sc,
|
|
search_idx);
|
|
}
|
|
if (map_idx == MPR_MAPTABLE_BAD_IDX) {
|
|
map_idx = _mapping_get_high_missing_mt_idx(sc);
|
|
if (map_idx != MPR_MAPTABLE_BAD_IDX) {
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if (mt_entry->dev_handle) {
|
|
_mapping_add_to_removal_table
|
|
(sc, mt_entry->dev_handle,
|
|
0);
|
|
is_removed = 1;
|
|
}
|
|
mt_entry->init_complete = 0;
|
|
}
|
|
}
|
|
if (map_idx != MPR_MAPTABLE_BAD_IDX) {
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
mt_entry->physical_id = phy_change->physical_id;
|
|
mt_entry->channel = 0;
|
|
mt_entry->id = map_idx;
|
|
mt_entry->dev_handle = phy_change->dev_handle;
|
|
mt_entry->missing_count = 0;
|
|
mt_entry->device_info = phy_change->device_info
|
|
| (MPR_DEV_RESERVED | MPR_MAP_IN_USE);
|
|
} else {
|
|
phy_change->is_processed = 1;
|
|
if (!sc->mt_full_retry) {
|
|
sc->mt_add_device_failed = 1;
|
|
continue;
|
|
}
|
|
printf("%s: failed to add the device with "
|
|
"handle 0x%04x because there is no free "
|
|
"space available in the mapping table\n",
|
|
__func__, phy_change->dev_handle);
|
|
continue;
|
|
}
|
|
if (sc->is_dpm_enable) {
|
|
if (mt_entry->dpm_entry_num !=
|
|
MPR_DPM_BAD_IDX) {
|
|
dpm_idx = mt_entry->dpm_entry_num;
|
|
dpm_entry = (Mpi2DriverMap0Entry_t *)
|
|
((u8 *)sc->dpm_pg0 + hdr_sz);
|
|
dpm_entry += dpm_idx;
|
|
missing_cnt = dpm_entry->
|
|
MappingInformation &
|
|
MPI2_DRVMAP0_MAPINFO_MISSING_MASK;
|
|
temp64_var = dpm_entry->
|
|
PhysicalIdentifier.High;
|
|
temp64_var = (temp64_var << 32) |
|
|
dpm_entry->PhysicalIdentifier.Low;
|
|
if ((mt_entry->physical_id ==
|
|
temp64_var) && !missing_cnt)
|
|
mt_entry->init_complete = 1;
|
|
} else {
|
|
dpm_idx = _mapping_get_free_dpm_idx(sc);
|
|
mt_entry->init_complete = 0;
|
|
}
|
|
if (dpm_idx != MPR_DPM_BAD_IDX &&
|
|
!mt_entry->init_complete) {
|
|
mt_entry->init_complete = 1;
|
|
mt_entry->dpm_entry_num = dpm_idx;
|
|
dpm_entry = (Mpi2DriverMap0Entry_t *)
|
|
((u8 *)sc->dpm_pg0 + hdr_sz);
|
|
dpm_entry += dpm_idx;
|
|
dpm_entry->PhysicalIdentifier.Low =
|
|
(0xFFFFFFFF &
|
|
mt_entry->physical_id);
|
|
dpm_entry->PhysicalIdentifier.High =
|
|
(mt_entry->physical_id >> 32);
|
|
dpm_entry->DeviceIndex = (U16) map_idx;
|
|
dpm_entry->MappingInformation = 0;
|
|
dpm_entry->PhysicalBitsMapping = 0;
|
|
sc->dpm_entry_used[dpm_idx] = 1;
|
|
sc->dpm_flush_entry[dpm_idx] = 1;
|
|
phy_change->is_processed = 1;
|
|
} else if (dpm_idx == MPR_DPM_BAD_IDX) {
|
|
phy_change->is_processed = 1;
|
|
mpr_dprint(sc, MPR_INFO, "%s: "
|
|
"failed to add the device "
|
|
"with handle 0x%04x to "
|
|
"persistent table because "
|
|
"there is no free space "
|
|
"available\n", __func__,
|
|
phy_change->dev_handle);
|
|
}
|
|
}
|
|
mt_entry->init_complete = 1;
|
|
}
|
|
|
|
phy_change->is_processed = 1;
|
|
}
|
|
if (is_removed)
|
|
_mapping_clear_removed_entries(sc);
|
|
}
|
|
|
|
/**
|
|
* _mapping_flush_dpm_pages -Flush the DPM pages to NVRAM
|
|
* @sc: per adapter object
|
|
*
|
|
* Returns nothing
|
|
*/
|
|
static void
|
|
_mapping_flush_dpm_pages(struct mpr_softc *sc)
|
|
{
|
|
Mpi2DriverMap0Entry_t *dpm_entry;
|
|
Mpi2ConfigReply_t mpi_reply;
|
|
Mpi2DriverMappingPage0_t config_page;
|
|
u16 entry_num;
|
|
|
|
for (entry_num = 0; entry_num < sc->max_dpm_entries; entry_num++) {
|
|
if (!sc->dpm_flush_entry[entry_num])
|
|
continue;
|
|
memset(&config_page, 0, sizeof(Mpi2DriverMappingPage0_t));
|
|
memcpy(&config_page.Header, (u8 *)sc->dpm_pg0,
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
dpm_entry = (Mpi2DriverMap0Entry_t *) ((u8 *)sc->dpm_pg0 +
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
dpm_entry += entry_num;
|
|
dpm_entry->MappingInformation = htole16(dpm_entry->
|
|
MappingInformation);
|
|
dpm_entry->DeviceIndex = htole16(dpm_entry->DeviceIndex);
|
|
dpm_entry->PhysicalBitsMapping = htole32(dpm_entry->
|
|
PhysicalBitsMapping);
|
|
memcpy(&config_page.Entry, (u8 *)dpm_entry,
|
|
sizeof(Mpi2DriverMap0Entry_t));
|
|
/* TODO-How to handle failed writes? */
|
|
if (mpr_config_set_dpm_pg0(sc, &mpi_reply, &config_page,
|
|
entry_num)) {
|
|
printf("%s: write of dpm entry %d for device failed\n",
|
|
__func__, entry_num);
|
|
} else
|
|
sc->dpm_flush_entry[entry_num] = 0;
|
|
dpm_entry->MappingInformation = le16toh(dpm_entry->
|
|
MappingInformation);
|
|
dpm_entry->DeviceIndex = le16toh(dpm_entry->DeviceIndex);
|
|
dpm_entry->PhysicalBitsMapping = le32toh(dpm_entry->
|
|
PhysicalBitsMapping);
|
|
}
|
|
}
|
|
|
|
/**
|
|
* _mapping_allocate_memory- allocates the memory required for mapping tables
|
|
* @sc: per adapter object
|
|
*
|
|
* Allocates the memory for all the tables required for host mapping
|
|
*
|
|
* Return 0 on success or non-zero on failure.
|
|
*/
|
|
int
|
|
mpr_mapping_allocate_memory(struct mpr_softc *sc)
|
|
{
|
|
uint32_t dpm_pg0_sz;
|
|
|
|
sc->mapping_table = malloc((sizeof(struct dev_mapping_table) *
|
|
sc->max_devices), M_MPR, M_ZERO|M_NOWAIT);
|
|
if (!sc->mapping_table)
|
|
goto free_resources;
|
|
|
|
sc->removal_table = malloc((sizeof(struct map_removal_table) *
|
|
sc->max_devices), M_MPR, M_ZERO|M_NOWAIT);
|
|
if (!sc->removal_table)
|
|
goto free_resources;
|
|
|
|
sc->enclosure_table = malloc((sizeof(struct enc_mapping_table) *
|
|
sc->max_enclosures), M_MPR, M_ZERO|M_NOWAIT);
|
|
if (!sc->enclosure_table)
|
|
goto free_resources;
|
|
|
|
sc->dpm_entry_used = malloc((sizeof(u8) * sc->max_dpm_entries),
|
|
M_MPR, M_ZERO|M_NOWAIT);
|
|
if (!sc->dpm_entry_used)
|
|
goto free_resources;
|
|
|
|
sc->dpm_flush_entry = malloc((sizeof(u8) * sc->max_dpm_entries),
|
|
M_MPR, M_ZERO|M_NOWAIT);
|
|
if (!sc->dpm_flush_entry)
|
|
goto free_resources;
|
|
|
|
dpm_pg0_sz = sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER) +
|
|
(sc->max_dpm_entries * sizeof(MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY));
|
|
|
|
sc->dpm_pg0 = malloc(dpm_pg0_sz, M_MPR, M_ZERO|M_NOWAIT);
|
|
if (!sc->dpm_pg0) {
|
|
printf("%s: memory alloc failed for dpm page; disabling dpm\n",
|
|
__func__);
|
|
sc->is_dpm_enable = 0;
|
|
}
|
|
|
|
return 0;
|
|
|
|
free_resources:
|
|
free(sc->mapping_table, M_MPR);
|
|
free(sc->removal_table, M_MPR);
|
|
free(sc->enclosure_table, M_MPR);
|
|
free(sc->dpm_entry_used, M_MPR);
|
|
free(sc->dpm_flush_entry, M_MPR);
|
|
free(sc->dpm_pg0, M_MPR);
|
|
printf("%s: device initialization failed due to failure in mapping "
|
|
"table memory allocation\n", __func__);
|
|
return -1;
|
|
}
|
|
|
|
/**
|
|
* mpr_mapping_free_memory- frees the memory allocated for mapping tables
|
|
* @sc: per adapter object
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
void
|
|
mpr_mapping_free_memory(struct mpr_softc *sc)
|
|
{
|
|
free(sc->mapping_table, M_MPR);
|
|
free(sc->removal_table, M_MPR);
|
|
free(sc->enclosure_table, M_MPR);
|
|
free(sc->dpm_entry_used, M_MPR);
|
|
free(sc->dpm_flush_entry, M_MPR);
|
|
free(sc->dpm_pg0, M_MPR);
|
|
}
|
|
|
|
|
|
static void
|
|
_mapping_process_dpm_pg0(struct mpr_softc *sc)
|
|
{
|
|
u8 missing_cnt, enc_idx;
|
|
u16 slot_id, entry_num, num_slots;
|
|
u32 map_idx, dev_idx, start_idx, end_idx;
|
|
struct dev_mapping_table *mt_entry;
|
|
Mpi2DriverMap0Entry_t *dpm_entry;
|
|
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
|
|
u16 max_num_phy_ids = le16toh(sc->ioc_pg8.MaxNumPhysicalMappedIDs);
|
|
struct enc_mapping_table *et_entry;
|
|
u64 physical_id;
|
|
u32 phy_bits = 0;
|
|
|
|
if (sc->ir_firmware)
|
|
_mapping_get_ir_maprange(sc, &start_idx, &end_idx);
|
|
|
|
dpm_entry = (Mpi2DriverMap0Entry_t *) ((uint8_t *) sc->dpm_pg0 +
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
for (entry_num = 0; entry_num < sc->max_dpm_entries; entry_num++,
|
|
dpm_entry++) {
|
|
physical_id = dpm_entry->PhysicalIdentifier.High;
|
|
physical_id = (physical_id << 32) |
|
|
dpm_entry->PhysicalIdentifier.Low;
|
|
if (!physical_id) {
|
|
sc->dpm_entry_used[entry_num] = 0;
|
|
continue;
|
|
}
|
|
sc->dpm_entry_used[entry_num] = 1;
|
|
dpm_entry->MappingInformation = le16toh(dpm_entry->
|
|
MappingInformation);
|
|
missing_cnt = dpm_entry->MappingInformation &
|
|
MPI2_DRVMAP0_MAPINFO_MISSING_MASK;
|
|
dev_idx = le16toh(dpm_entry->DeviceIndex);
|
|
phy_bits = le32toh(dpm_entry->PhysicalBitsMapping);
|
|
if (sc->ir_firmware && (dev_idx >= start_idx) &&
|
|
(dev_idx <= end_idx)) {
|
|
mt_entry = &sc->mapping_table[dev_idx];
|
|
mt_entry->physical_id = dpm_entry->PhysicalIdentifier.High;
|
|
mt_entry->physical_id = (mt_entry->physical_id << 32) |
|
|
dpm_entry->PhysicalIdentifier.Low;
|
|
mt_entry->channel = MPR_RAID_CHANNEL;
|
|
mt_entry->id = dev_idx;
|
|
mt_entry->missing_count = missing_cnt;
|
|
mt_entry->dpm_entry_num = entry_num;
|
|
mt_entry->device_info = MPR_DEV_RESERVED;
|
|
continue;
|
|
}
|
|
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
|
|
if (dev_idx < (sc->num_rsvd_entries +
|
|
max_num_phy_ids)) {
|
|
slot_id = 0;
|
|
if (ioc_pg8_flags &
|
|
MPI2_IOCPAGE8_FLAGS_DA_START_SLOT_1)
|
|
slot_id = 1;
|
|
num_slots = max_num_phy_ids;
|
|
} else {
|
|
slot_id = 0;
|
|
num_slots = dpm_entry->MappingInformation &
|
|
MPI2_DRVMAP0_MAPINFO_SLOT_MASK;
|
|
num_slots >>= MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT;
|
|
}
|
|
enc_idx = sc->num_enc_table_entries;
|
|
if (enc_idx >= sc->max_enclosures) {
|
|
printf("%s: enclosure entries exceed max "
|
|
"enclosures of %d\n", __func__,
|
|
sc->max_enclosures);
|
|
break;
|
|
}
|
|
sc->num_enc_table_entries++;
|
|
et_entry = &sc->enclosure_table[enc_idx];
|
|
physical_id = dpm_entry->PhysicalIdentifier.High;
|
|
et_entry->enclosure_id = (physical_id << 32) |
|
|
dpm_entry->PhysicalIdentifier.Low;
|
|
et_entry->start_index = dev_idx;
|
|
et_entry->dpm_entry_num = entry_num;
|
|
et_entry->num_slots = num_slots;
|
|
et_entry->start_slot = slot_id;
|
|
et_entry->missing_count = missing_cnt;
|
|
et_entry->phy_bits = phy_bits;
|
|
|
|
mt_entry = &sc->mapping_table[dev_idx];
|
|
for (map_idx = dev_idx; map_idx < (dev_idx + num_slots);
|
|
map_idx++, mt_entry++) {
|
|
if (mt_entry->dpm_entry_num !=
|
|
MPR_DPM_BAD_IDX) {
|
|
printf("%s: conflict in mapping table "
|
|
"for enclosure %d\n", __func__,
|
|
enc_idx);
|
|
break;
|
|
}
|
|
physical_id = dpm_entry->PhysicalIdentifier.High;
|
|
mt_entry->physical_id = (physical_id << 32) |
|
|
dpm_entry->PhysicalIdentifier.Low;
|
|
mt_entry->phy_bits = phy_bits;
|
|
mt_entry->channel = 0;
|
|
mt_entry->id = dev_idx;
|
|
mt_entry->dpm_entry_num = entry_num;
|
|
mt_entry->missing_count = missing_cnt;
|
|
mt_entry->device_info = MPR_DEV_RESERVED;
|
|
}
|
|
} else if ((ioc_pg8_flags &
|
|
MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) {
|
|
map_idx = dev_idx;
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if (mt_entry->dpm_entry_num != MPR_DPM_BAD_IDX) {
|
|
printf("%s: conflict in mapping table for "
|
|
"device %d\n", __func__, map_idx);
|
|
break;
|
|
}
|
|
physical_id = dpm_entry->PhysicalIdentifier.High;
|
|
mt_entry->physical_id = (physical_id << 32) |
|
|
dpm_entry->PhysicalIdentifier.Low;
|
|
mt_entry->phy_bits = phy_bits;
|
|
mt_entry->channel = 0;
|
|
mt_entry->id = dev_idx;
|
|
mt_entry->missing_count = missing_cnt;
|
|
mt_entry->dpm_entry_num = entry_num;
|
|
mt_entry->device_info = MPR_DEV_RESERVED;
|
|
}
|
|
} /*close the loop for DPM table */
|
|
}
|
|
|
|
/*
|
|
* mpr_mapping_check_devices - start of the day check for device availabilty
|
|
* @sc: per adapter object
|
|
* @sleep_flag: Flag indicating whether this function can sleep or not
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
void
|
|
mpr_mapping_check_devices(struct mpr_softc *sc, int sleep_flag)
|
|
{
|
|
u32 i;
|
|
/* u32 cntdn, i;
|
|
u32 timeout = 60;*/
|
|
struct dev_mapping_table *mt_entry;
|
|
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
|
|
struct enc_mapping_table *et_entry;
|
|
u32 start_idx, end_idx;
|
|
|
|
/* We need to ucomment this when this function is called
|
|
* from the port enable complete */
|
|
#if 0
|
|
sc->track_mapping_events = 0;
|
|
cntdn = (sleep_flag == CAN_SLEEP) ? 1000*timeout : 2000*timeout;
|
|
do {
|
|
if (!sc->pending_map_events)
|
|
break;
|
|
if (sleep_flag == CAN_SLEEP)
|
|
pause("mpr_pause", (hz/1000));/* 1msec sleep */
|
|
else
|
|
DELAY(500); /* 500 useconds delay */
|
|
} while (--cntdn);
|
|
|
|
|
|
if (!cntdn)
|
|
printf("%s: there are %d"
|
|
" pending events after %d seconds of delay\n",
|
|
__func__, sc->pending_map_events, timeout);
|
|
#endif
|
|
sc->pending_map_events = 0;
|
|
|
|
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING) {
|
|
et_entry = sc->enclosure_table;
|
|
for (i = 0; i < sc->num_enc_table_entries; i++, et_entry++) {
|
|
if (!et_entry->init_complete) {
|
|
if (et_entry->missing_count <
|
|
MPR_MAX_MISSING_COUNT) {
|
|
et_entry->missing_count++;
|
|
if (et_entry->dpm_entry_num !=
|
|
MPR_DPM_BAD_IDX)
|
|
_mapping_commit_enc_entry(sc,
|
|
et_entry);
|
|
}
|
|
et_entry->init_complete = 1;
|
|
}
|
|
}
|
|
if (!sc->ir_firmware)
|
|
return;
|
|
_mapping_get_ir_maprange(sc, &start_idx, &end_idx);
|
|
mt_entry = &sc->mapping_table[start_idx];
|
|
for (i = start_idx; i < (end_idx + 1); i++, mt_entry++) {
|
|
if (mt_entry->device_info & MPR_DEV_RESERVED
|
|
&& !mt_entry->physical_id)
|
|
mt_entry->init_complete = 1;
|
|
else if (mt_entry->device_info & MPR_DEV_RESERVED) {
|
|
if (!mt_entry->init_complete) {
|
|
if (mt_entry->missing_count <
|
|
MPR_MAX_MISSING_COUNT) {
|
|
mt_entry->missing_count++;
|
|
if (mt_entry->dpm_entry_num !=
|
|
MPR_DPM_BAD_IDX)
|
|
_mapping_commit_map_entry(sc,
|
|
mt_entry);
|
|
}
|
|
mt_entry->init_complete = 1;
|
|
}
|
|
}
|
|
}
|
|
} else if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) ==
|
|
MPI2_IOCPAGE8_FLAGS_DEVICE_PERSISTENCE_MAPPING) {
|
|
mt_entry = sc->mapping_table;
|
|
for (i = 0; i < sc->max_devices; i++, mt_entry++) {
|
|
if (mt_entry->device_info & MPR_DEV_RESERVED
|
|
&& !mt_entry->physical_id)
|
|
mt_entry->init_complete = 1;
|
|
else if (mt_entry->device_info & MPR_DEV_RESERVED) {
|
|
if (!mt_entry->init_complete) {
|
|
if (mt_entry->missing_count <
|
|
MPR_MAX_MISSING_COUNT) {
|
|
mt_entry->missing_count++;
|
|
if (mt_entry->dpm_entry_num !=
|
|
MPR_DPM_BAD_IDX)
|
|
_mapping_commit_map_entry(sc,
|
|
mt_entry);
|
|
}
|
|
mt_entry->init_complete = 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
|
|
/**
|
|
* mpr_mapping_is_reinit_required - check whether event replay required
|
|
* @sc: per adapter object
|
|
*
|
|
* Checks the per ioc flags and decide whether reinit of events required
|
|
*
|
|
* Returns 1 for reinit of ioc 0 for not.
|
|
*/
|
|
int mpr_mapping_is_reinit_required(struct mpr_softc *sc)
|
|
{
|
|
if (!sc->mt_full_retry && sc->mt_add_device_failed) {
|
|
sc->mt_full_retry = 1;
|
|
sc->mt_add_device_failed = 0;
|
|
_mapping_flush_dpm_pages(sc);
|
|
return 1;
|
|
}
|
|
sc->mt_full_retry = 1;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* mpr_mapping_initialize - initialize mapping tables
|
|
* @sc: per adapter object
|
|
*
|
|
* Read controller persitant mapping tables into internal data area.
|
|
*
|
|
* Return 0 for success or non-zero for failure.
|
|
*/
|
|
int
|
|
mpr_mapping_initialize(struct mpr_softc *sc)
|
|
{
|
|
uint16_t volume_mapping_flags, dpm_pg0_sz;
|
|
uint32_t i;
|
|
Mpi2ConfigReply_t mpi_reply;
|
|
int error;
|
|
uint8_t retry_count;
|
|
uint16_t ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
|
|
|
|
/* The additional 1 accounts for the virtual enclosure
|
|
* created for the controller
|
|
*/
|
|
sc->max_enclosures = sc->facts->MaxEnclosures + 1;
|
|
sc->max_expanders = sc->facts->MaxSasExpanders;
|
|
sc->max_volumes = sc->facts->MaxVolumes;
|
|
sc->max_devices = sc->facts->MaxTargets + sc->max_volumes;
|
|
sc->pending_map_events = 0;
|
|
sc->num_enc_table_entries = 0;
|
|
sc->num_rsvd_entries = 0;
|
|
sc->num_channels = 1;
|
|
sc->max_dpm_entries = sc->ioc_pg8.MaxPersistentEntries;
|
|
sc->is_dpm_enable = (sc->max_dpm_entries) ? 1 : 0;
|
|
sc->track_mapping_events = 0;
|
|
|
|
if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_DISABLE_PERSISTENT_MAPPING)
|
|
sc->is_dpm_enable = 0;
|
|
|
|
if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0)
|
|
sc->num_rsvd_entries = 1;
|
|
|
|
volume_mapping_flags = sc->ioc_pg8.IRVolumeMappingFlags &
|
|
MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
|
|
if (sc->ir_firmware && (volume_mapping_flags ==
|
|
MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING))
|
|
sc->num_rsvd_entries += sc->max_volumes;
|
|
|
|
error = mpr_mapping_allocate_memory(sc);
|
|
if (error)
|
|
return (error);
|
|
|
|
for (i = 0; i < sc->max_devices; i++)
|
|
_mapping_clear_map_entry(sc->mapping_table + i);
|
|
|
|
for (i = 0; i < sc->max_enclosures; i++)
|
|
_mapping_clear_enc_entry(sc->enclosure_table + i);
|
|
|
|
for (i = 0; i < sc->max_devices; i++) {
|
|
sc->removal_table[i].dev_handle = 0;
|
|
sc->removal_table[i].dpm_entry_num = MPR_DPM_BAD_IDX;
|
|
}
|
|
|
|
memset(sc->dpm_entry_used, 0, sc->max_dpm_entries);
|
|
memset(sc->dpm_flush_entry, 0, sc->max_dpm_entries);
|
|
|
|
if (sc->is_dpm_enable) {
|
|
dpm_pg0_sz = sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER) +
|
|
(sc->max_dpm_entries *
|
|
sizeof(MPI2_CONFIG_PAGE_DRIVER_MAP0_ENTRY));
|
|
retry_count = 0;
|
|
|
|
retry_read_dpm:
|
|
if (mpr_config_get_dpm_pg0(sc, &mpi_reply, sc->dpm_pg0,
|
|
dpm_pg0_sz)) {
|
|
printf("%s: dpm page read failed; disabling dpm\n",
|
|
__func__);
|
|
if (retry_count < 3) {
|
|
retry_count++;
|
|
goto retry_read_dpm;
|
|
}
|
|
sc->is_dpm_enable = 0;
|
|
}
|
|
}
|
|
|
|
if (sc->is_dpm_enable)
|
|
_mapping_process_dpm_pg0(sc);
|
|
|
|
sc->track_mapping_events = 1;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* mpr_mapping_exit - clear mapping table and associated memory
|
|
* @sc: per adapter object
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
void
|
|
mpr_mapping_exit(struct mpr_softc *sc)
|
|
{
|
|
_mapping_flush_dpm_pages(sc);
|
|
mpr_mapping_free_memory(sc);
|
|
}
|
|
|
|
/**
|
|
* mpr_mapping_get_sas_id - assign a target id for sas device
|
|
* @sc: per adapter object
|
|
* @sas_address: sas address of the device
|
|
* @handle: device handle
|
|
*
|
|
* Returns valid ID on success or BAD_ID.
|
|
*/
|
|
unsigned int
|
|
mpr_mapping_get_sas_id(struct mpr_softc *sc, uint64_t sas_address, u16 handle)
|
|
{
|
|
u32 map_idx;
|
|
struct dev_mapping_table *mt_entry;
|
|
|
|
for (map_idx = 0; map_idx < sc->max_devices; map_idx++) {
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if (mt_entry->dev_handle == handle && mt_entry->physical_id ==
|
|
sas_address)
|
|
return mt_entry->id;
|
|
}
|
|
|
|
return MPR_MAP_BAD_ID;
|
|
}
|
|
|
|
/**
|
|
* mpr_mapping_get_sas_id_from_handle - find a target id in mapping table using
|
|
* only the dev handle. This is just a wrapper function for the local function
|
|
* _mapping_get_mt_idx_from_handle.
|
|
* @sc: per adapter object
|
|
* @handle: device handle
|
|
*
|
|
* Returns valid ID on success or BAD_ID.
|
|
*/
|
|
unsigned int
|
|
mpr_mapping_get_sas_id_from_handle(struct mpr_softc *sc, u16 handle)
|
|
{
|
|
return (_mapping_get_mt_idx_from_handle(sc, handle));
|
|
}
|
|
|
|
/**
|
|
* mpr_mapping_get_raid_id - assign a target id for raid device
|
|
* @sc: per adapter object
|
|
* @wwid: world wide identifier for raid volume
|
|
* @handle: device handle
|
|
*
|
|
* Returns valid ID on success or BAD_ID.
|
|
*/
|
|
unsigned int
|
|
mpr_mapping_get_raid_id(struct mpr_softc *sc, u64 wwid, u16 handle)
|
|
{
|
|
u32 map_idx;
|
|
struct dev_mapping_table *mt_entry;
|
|
|
|
for (map_idx = 0; map_idx < sc->max_devices; map_idx++) {
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
if (mt_entry->dev_handle == handle && mt_entry->physical_id ==
|
|
wwid)
|
|
return mt_entry->id;
|
|
}
|
|
|
|
return MPR_MAP_BAD_ID;
|
|
}
|
|
|
|
/**
|
|
* mpr_mapping_get_raid_id_from_handle - find raid device in mapping table
|
|
* using only the volume dev handle. This is just a wrapper function for the
|
|
* local function _mapping_get_ir_mt_idx_from_handle.
|
|
* @sc: per adapter object
|
|
* @volHandle: volume device handle
|
|
*
|
|
* Returns valid ID on success or BAD_ID.
|
|
*/
|
|
unsigned int
|
|
mpr_mapping_get_raid_id_from_handle(struct mpr_softc *sc, u16 volHandle)
|
|
{
|
|
return (_mapping_get_ir_mt_idx_from_handle(sc, volHandle));
|
|
}
|
|
|
|
/**
|
|
* mpr_mapping_enclosure_dev_status_change_event - handle enclosure events
|
|
* @sc: per adapter object
|
|
* @event_data: event data payload
|
|
*
|
|
* Return nothing.
|
|
*/
|
|
void
|
|
mpr_mapping_enclosure_dev_status_change_event(struct mpr_softc *sc,
|
|
Mpi2EventDataSasEnclDevStatusChange_t *event_data)
|
|
{
|
|
u8 enc_idx, missing_count;
|
|
struct enc_mapping_table *et_entry;
|
|
Mpi2DriverMap0Entry_t *dpm_entry;
|
|
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
|
|
u8 map_shift = MPI2_DRVMAP0_MAPINFO_SLOT_SHIFT;
|
|
u8 update_phy_bits = 0;
|
|
u32 saved_phy_bits;
|
|
uint64_t temp64_var;
|
|
|
|
if ((ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_MASK_MAPPING_MODE) !=
|
|
MPI2_IOCPAGE8_FLAGS_ENCLOSURE_SLOT_MAPPING)
|
|
goto out;
|
|
|
|
dpm_entry = (Mpi2DriverMap0Entry_t *)((u8 *)sc->dpm_pg0 +
|
|
sizeof(MPI2_CONFIG_EXTENDED_PAGE_HEADER));
|
|
|
|
if (event_data->ReasonCode == MPI2_EVENT_SAS_ENCL_RC_ADDED) {
|
|
if (!event_data->NumSlots) {
|
|
printf("%s: enclosure with handle = 0x%x reported 0 "
|
|
"slots\n", __func__,
|
|
le16toh(event_data->EnclosureHandle));
|
|
goto out;
|
|
}
|
|
temp64_var = event_data->EnclosureLogicalID.High;
|
|
temp64_var = (temp64_var << 32) |
|
|
event_data->EnclosureLogicalID.Low;
|
|
enc_idx = _mapping_get_enc_idx_from_id(sc, temp64_var,
|
|
event_data->PhyBits);
|
|
if (enc_idx != MPR_ENCTABLE_BAD_IDX) {
|
|
et_entry = &sc->enclosure_table[enc_idx];
|
|
if (et_entry->init_complete &&
|
|
!et_entry->missing_count) {
|
|
printf("%s: enclosure %d is already present "
|
|
"with handle = 0x%x\n",__func__, enc_idx,
|
|
et_entry->enc_handle);
|
|
goto out;
|
|
}
|
|
et_entry->enc_handle = le16toh(event_data->
|
|
EnclosureHandle);
|
|
et_entry->start_slot = le16toh(event_data->StartSlot);
|
|
saved_phy_bits = et_entry->phy_bits;
|
|
et_entry->phy_bits |= le32toh(event_data->PhyBits);
|
|
if (saved_phy_bits != et_entry->phy_bits)
|
|
update_phy_bits = 1;
|
|
if (et_entry->missing_count || update_phy_bits) {
|
|
et_entry->missing_count = 0;
|
|
if (sc->is_dpm_enable &&
|
|
et_entry->dpm_entry_num !=
|
|
MPR_DPM_BAD_IDX) {
|
|
dpm_entry += et_entry->dpm_entry_num;
|
|
missing_count =
|
|
(u8)(dpm_entry->MappingInformation &
|
|
MPI2_DRVMAP0_MAPINFO_MISSING_MASK);
|
|
if (!et_entry->init_complete && (
|
|
missing_count || update_phy_bits)) {
|
|
dpm_entry->MappingInformation
|
|
= et_entry->num_slots;
|
|
dpm_entry->MappingInformation
|
|
<<= map_shift;
|
|
dpm_entry->PhysicalBitsMapping
|
|
= et_entry->phy_bits;
|
|
sc->dpm_flush_entry[et_entry->
|
|
dpm_entry_num] = 1;
|
|
}
|
|
}
|
|
}
|
|
} else {
|
|
enc_idx = sc->num_enc_table_entries;
|
|
if (enc_idx >= sc->max_enclosures) {
|
|
printf("%s: enclosure can not be added; "
|
|
"mapping table is full\n", __func__);
|
|
goto out;
|
|
}
|
|
sc->num_enc_table_entries++;
|
|
et_entry = &sc->enclosure_table[enc_idx];
|
|
et_entry->enc_handle = le16toh(event_data->
|
|
EnclosureHandle);
|
|
et_entry->enclosure_id = event_data->
|
|
EnclosureLogicalID.High;
|
|
et_entry->enclosure_id = ( et_entry->enclosure_id <<
|
|
32) | event_data->EnclosureLogicalID.Low;
|
|
et_entry->start_index = MPR_MAPTABLE_BAD_IDX;
|
|
et_entry->dpm_entry_num = MPR_DPM_BAD_IDX;
|
|
et_entry->num_slots = le16toh(event_data->NumSlots);
|
|
et_entry->start_slot = le16toh(event_data->StartSlot);
|
|
et_entry->phy_bits = le32toh(event_data->PhyBits);
|
|
}
|
|
et_entry->init_complete = 1;
|
|
} else if (event_data->ReasonCode ==
|
|
MPI2_EVENT_SAS_ENCL_RC_NOT_RESPONDING) {
|
|
enc_idx = _mapping_get_enc_idx_from_handle(sc,
|
|
le16toh(event_data->EnclosureHandle));
|
|
if (enc_idx == MPR_ENCTABLE_BAD_IDX) {
|
|
printf("%s: cannot unmap enclosure %d because it has "
|
|
"already been deleted", __func__, enc_idx);
|
|
goto out;
|
|
}
|
|
et_entry = &sc->enclosure_table[enc_idx];
|
|
if (!et_entry->init_complete) {
|
|
if (et_entry->missing_count < MPR_MAX_MISSING_COUNT)
|
|
et_entry->missing_count++;
|
|
else
|
|
et_entry->init_complete = 1;
|
|
}
|
|
if (!et_entry->missing_count)
|
|
et_entry->missing_count++;
|
|
if (sc->is_dpm_enable && !et_entry->init_complete &&
|
|
et_entry->dpm_entry_num != MPR_DPM_BAD_IDX) {
|
|
dpm_entry += et_entry->dpm_entry_num;
|
|
dpm_entry->MappingInformation = et_entry->num_slots;
|
|
dpm_entry->MappingInformation <<= map_shift;
|
|
dpm_entry->MappingInformation |=
|
|
et_entry->missing_count;
|
|
sc->dpm_flush_entry[et_entry->dpm_entry_num] = 1;
|
|
}
|
|
et_entry->init_complete = 1;
|
|
}
|
|
|
|
out:
|
|
_mapping_flush_dpm_pages(sc);
|
|
if (sc->pending_map_events)
|
|
sc->pending_map_events--;
|
|
}
|
|
|
|
/**
|
|
* mpr_mapping_topology_change_event - handle topology change events
|
|
* @sc: per adapter object
|
|
* @event_data: event data payload
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
void
|
|
mpr_mapping_topology_change_event(struct mpr_softc *sc,
|
|
Mpi2EventDataSasTopologyChangeList_t *event_data)
|
|
{
|
|
struct _map_topology_change topo_change;
|
|
struct _map_phy_change *phy_change;
|
|
Mpi2EventSasTopoPhyEntry_t *event_phy_change;
|
|
u8 i, num_entries;
|
|
|
|
topo_change.enc_handle = le16toh(event_data->EnclosureHandle);
|
|
topo_change.exp_handle = le16toh(event_data->ExpanderDevHandle);
|
|
num_entries = event_data->NumEntries;
|
|
topo_change.num_entries = num_entries;
|
|
topo_change.start_phy_num = event_data->StartPhyNum;
|
|
topo_change.num_phys = event_data->NumPhys;
|
|
topo_change.exp_status = event_data->ExpStatus;
|
|
event_phy_change = event_data->PHY;
|
|
topo_change.phy_details = NULL;
|
|
|
|
if (!num_entries)
|
|
goto out;
|
|
phy_change = malloc(sizeof(struct _map_phy_change) * num_entries,
|
|
M_MPR, M_NOWAIT|M_ZERO);
|
|
topo_change.phy_details = phy_change;
|
|
if (!phy_change)
|
|
goto out;
|
|
for (i = 0; i < num_entries; i++, event_phy_change++, phy_change++) {
|
|
phy_change->dev_handle = le16toh(event_phy_change->
|
|
AttachedDevHandle);
|
|
phy_change->reason = event_phy_change->PhyStatus &
|
|
MPI2_EVENT_SAS_TOPO_RC_MASK;
|
|
}
|
|
_mapping_update_missing_count(sc, &topo_change);
|
|
_mapping_get_dev_info(sc, &topo_change);
|
|
_mapping_clear_removed_entries(sc);
|
|
_mapping_add_new_device(sc, &topo_change);
|
|
|
|
out:
|
|
free(topo_change.phy_details, M_MPR);
|
|
_mapping_flush_dpm_pages(sc);
|
|
if (sc->pending_map_events)
|
|
sc->pending_map_events--;
|
|
}
|
|
|
|
/**
|
|
* _mapping_check_update_ir_mt_idx - Check and update IR map table index
|
|
* @sc: per adapter object
|
|
* @event_data: event data payload
|
|
* @evt_idx: current event index
|
|
* @map_idx: current index and the place holder for new map table index
|
|
* @wwid_table: world wide name for volumes in the element table
|
|
*
|
|
* pass through IR events and find whether any events matches and if so
|
|
* tries to find new index if not returns failure
|
|
*
|
|
* Returns 0 on success and 1 on failure
|
|
*/
|
|
static int
|
|
_mapping_check_update_ir_mt_idx(struct mpr_softc *sc,
|
|
Mpi2EventDataIrConfigChangeList_t *event_data, int evt_idx, u32 *map_idx,
|
|
u64 *wwid_table)
|
|
{
|
|
struct dev_mapping_table *mt_entry;
|
|
u32 st_idx, end_idx, mt_idx = *map_idx;
|
|
u8 match = 0;
|
|
Mpi2EventIrConfigElement_t *element;
|
|
u16 element_flags;
|
|
int i;
|
|
|
|
mt_entry = &sc->mapping_table[mt_idx];
|
|
_mapping_get_ir_maprange(sc, &st_idx, &end_idx);
|
|
search_again:
|
|
match = 0;
|
|
for (i = evt_idx + 1; i < event_data->NumElements; i++) {
|
|
element = (Mpi2EventIrConfigElement_t *)
|
|
&event_data->ConfigElement[i];
|
|
element_flags = le16toh(element->ElementFlags);
|
|
if ((element_flags &
|
|
MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK) !=
|
|
MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT)
|
|
continue;
|
|
if (element->ReasonCode == MPI2_EVENT_IR_CHANGE_RC_ADDED ||
|
|
element->ReasonCode ==
|
|
MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED) {
|
|
if (mt_entry->physical_id == wwid_table[i]) {
|
|
match = 1;
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
|
|
if (match) {
|
|
do {
|
|
mt_idx++;
|
|
if (mt_idx > end_idx)
|
|
return 1;
|
|
mt_entry = &sc->mapping_table[mt_idx];
|
|
} while (mt_entry->device_info & MPR_MAP_IN_USE);
|
|
goto search_again;
|
|
}
|
|
*map_idx = mt_idx;
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* mpr_mapping_ir_config_change_event - handle IR config change list events
|
|
* @sc: per adapter object
|
|
* @event_data: event data payload
|
|
*
|
|
* Returns nothing.
|
|
*/
|
|
void
|
|
mpr_mapping_ir_config_change_event(struct mpr_softc *sc,
|
|
Mpi2EventDataIrConfigChangeList_t *event_data)
|
|
{
|
|
Mpi2EventIrConfigElement_t *element;
|
|
int i;
|
|
u64 *wwid_table;
|
|
u32 map_idx, flags;
|
|
struct dev_mapping_table *mt_entry;
|
|
u16 element_flags;
|
|
u8 log_full_error = 0;
|
|
|
|
wwid_table = malloc(sizeof(u64) * event_data->NumElements, M_MPR,
|
|
M_NOWAIT | M_ZERO);
|
|
if (!wwid_table)
|
|
goto out;
|
|
element = (Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
|
|
flags = le32toh(event_data->Flags);
|
|
for (i = 0; i < event_data->NumElements; i++, element++) {
|
|
element_flags = le16toh(element->ElementFlags);
|
|
if ((element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_ADDED) &&
|
|
(element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_REMOVED) &&
|
|
(element->ReasonCode != MPI2_EVENT_IR_CHANGE_RC_NO_CHANGE)
|
|
&& (element->ReasonCode !=
|
|
MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED))
|
|
continue;
|
|
if ((element_flags &
|
|
MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK) ==
|
|
MPI2_EVENT_IR_CHANGE_EFLAGS_VOLUME_ELEMENT) {
|
|
mpr_config_get_volume_wwid(sc,
|
|
le16toh(element->VolDevHandle), &wwid_table[i]);
|
|
map_idx = _mapping_get_ir_mt_idx_from_wwid(sc,
|
|
wwid_table[i]);
|
|
if (map_idx != MPR_MAPTABLE_BAD_IDX) {
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
mt_entry->device_info |= MPR_MAP_IN_USE;
|
|
}
|
|
}
|
|
}
|
|
if (flags == MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG)
|
|
goto out;
|
|
else {
|
|
element = (Mpi2EventIrConfigElement_t *)&event_data->
|
|
ConfigElement[0];
|
|
for (i = 0; i < event_data->NumElements; i++, element++) {
|
|
if (element->ReasonCode ==
|
|
MPI2_EVENT_IR_CHANGE_RC_ADDED ||
|
|
element->ReasonCode ==
|
|
MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED) {
|
|
map_idx = _mapping_get_ir_mt_idx_from_wwid
|
|
(sc, wwid_table[i]);
|
|
if (map_idx != MPR_MAPTABLE_BAD_IDX) {
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
mt_entry->channel = MPR_RAID_CHANNEL;
|
|
mt_entry->id = map_idx;
|
|
mt_entry->dev_handle = le16toh
|
|
(element->VolDevHandle);
|
|
mt_entry->device_info =
|
|
MPR_DEV_RESERVED | MPR_MAP_IN_USE;
|
|
_mapping_update_ir_missing_cnt(sc,
|
|
map_idx, element, wwid_table[i]);
|
|
continue;
|
|
}
|
|
map_idx = _mapping_get_free_ir_mt_idx(sc);
|
|
if (map_idx == MPR_MAPTABLE_BAD_IDX)
|
|
log_full_error = 1;
|
|
else if (i < (event_data->NumElements - 1)) {
|
|
log_full_error =
|
|
_mapping_check_update_ir_mt_idx
|
|
(sc, event_data, i, &map_idx,
|
|
wwid_table);
|
|
}
|
|
if (log_full_error) {
|
|
printf("%s: no space to add the RAID "
|
|
"volume with handle 0x%04x in "
|
|
"mapping table\n", __func__, le16toh
|
|
(element->VolDevHandle));
|
|
continue;
|
|
}
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
mt_entry->physical_id = wwid_table[i];
|
|
mt_entry->channel = MPR_RAID_CHANNEL;
|
|
mt_entry->id = map_idx;
|
|
mt_entry->dev_handle = le16toh(element->
|
|
VolDevHandle);
|
|
mt_entry->device_info = MPR_DEV_RESERVED |
|
|
MPR_MAP_IN_USE;
|
|
mt_entry->init_complete = 0;
|
|
_mapping_update_ir_missing_cnt(sc, map_idx,
|
|
element, wwid_table[i]);
|
|
} else if (element->ReasonCode ==
|
|
MPI2_EVENT_IR_CHANGE_RC_REMOVED) {
|
|
map_idx = _mapping_get_ir_mt_idx_from_wwid(sc,
|
|
wwid_table[i]);
|
|
if (map_idx == MPR_MAPTABLE_BAD_IDX) {
|
|
printf("%s: failed to remove a volume "
|
|
"because it has already been "
|
|
"removed\n", __func__);
|
|
continue;
|
|
}
|
|
_mapping_update_ir_missing_cnt(sc, map_idx,
|
|
element, wwid_table[i]);
|
|
} else if (element->ReasonCode ==
|
|
MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED) {
|
|
map_idx = _mapping_get_mt_idx_from_handle(sc,
|
|
le16toh(element->VolDevHandle));
|
|
if (map_idx == MPR_MAPTABLE_BAD_IDX) {
|
|
printf("%s: failed to remove volume "
|
|
"with handle 0x%04x because it has "
|
|
"already been removed\n", __func__,
|
|
le16toh(element->VolDevHandle));
|
|
continue;
|
|
}
|
|
mt_entry = &sc->mapping_table[map_idx];
|
|
_mapping_update_ir_missing_cnt(sc, map_idx,
|
|
element, mt_entry->physical_id);
|
|
}
|
|
}
|
|
}
|
|
|
|
out:
|
|
_mapping_flush_dpm_pages(sc);
|
|
free(wwid_table, M_MPR);
|
|
if (sc->pending_map_events)
|
|
sc->pending_map_events--;
|
|
}
|