ian 3aefca1073 Remove the ARM_DEVICE_MULTIPASS option and make its effect be the default. ... Multipass device attachment was tested on many arm platforms by users and only success was reported on the arm@ mailing list. This is just the long-delayed followup of making it the default. Multipass attachment is necessary when using vendor-supplied FDT data, because our devices may need to be attached in a different order than they are described in the FDT data.		2014-10-26 18:30:35 +00:00
..
at91_aic.c	Unify interrupts bit definition and usage. While here remove PSR_C_bit.	2014-09-10 15:25:15 +00:00
at91_aicreg.h
at91_cfata.c
at91_common.c	Remove keyboard entropy [1] from r270105.	2014-08-17 18:27:02 +00:00
at91_gpio.h
at91_machdep.c	Define at91_master_clock in only one file to eliminate warnings about	2014-08-17 16:53:14 +00:00
at91_mci.c	Make note about reset vs RTOE actions...	2014-08-18 21:04:35 +00:00
at91_mcireg.h	Print the symbolic bit names for the status when we get a timeout.	2014-08-14 23:17:33 +00:00
at91_pdcreg.h
at91_pinctrl.c	Convert the at91_pinctrl driver to use the new fdt_pinctrl interface.	2014-09-13 19:59:16 +00:00
at91_pio_sam9g20.h
at91_pio_sam9g45.h
at91_pio.c	Implement the FDT static pinctl/pinmux spec for Atmel. This will	2014-08-15 16:08:52 +00:00
at91_pioreg.h
at91_piovar.h	Implement the FDT static pinctl/pinmux spec for Atmel. This will	2014-08-15 16:08:52 +00:00
at91_pit.c	Add support for multipass to Atmel, for both FDT and !FDT cases.	2014-08-14 04:21:25 +00:00
at91_pitreg.h
at91_pmc.c	Add support for multipass to Atmel, for both FDT and !FDT cases.	2014-08-14 04:21:25 +00:00
at91_pmcreg.h
at91_pmcvar.h
at91_reset.S
at91_rst.c
at91_rstreg.h
at91_rtc.c
at91_rtcreg.h
at91_sdramc.c
at91_shdwc.c
at91_smc.c
at91_smc.h
at91_spi.c
at91_spireg.h
at91_ssc.c
at91_sscreg.h
at91_st.c
at91_streg.h
at91_tcb.c
at91_twi.c
at91_twiio.h
at91_twireg.h
at91_usartreg.h
at91_wdt.c
at91_wdtreg.h
at91.c	Unify interrupts bit definition and usage. While here remove PSR_C_bit.	2014-09-10 15:25:15 +00:00
at91board.h
at91reg.h
at91rm92reg.h	Fix typos.	2014-09-26 09:07:02 +00:00
at91rm9200_devices.c
at91rm9200.c	Remove a bogus AIC.	2014-09-27 02:15:45 +00:00
at91rm9200var.h
at91sam9g20.c
at91sam9g20reg.h	Fix typos.	2014-09-26 09:07:02 +00:00
at91sam9g45.c
at91sam9g45reg.h	Fix the definitioin of AT91SAM9G45_IRQ_PIOE and rename it to	2014-09-27 14:39:00 +00:00
at91sam9x5.c
at91sam9x5reg.h	Fix typos.	2014-09-26 09:07:02 +00:00
at91sam9260.c	Add AIC to at91sam9260 support, now that it is needed for multipass to	2014-08-14 04:21:31 +00:00
at91sam9260reg.h	Fix the size of AT91SAM9260_PIT_SIZE.	2014-09-26 09:08:09 +00:00
at91soc.c
at91soc.h
at91var.h
board_bwct.c
board_eb9200.c
board_ethernut5.c
board_hl200.c
board_hl201.c
board_kb920x.c
board_qila9g20.c
board_sam9g20ek.c
board_sam9x25ek.c
board_sam9260ek.c
board_sn9g45.c
board_tsc4370.c
files.at91	Convert the at91_pinctrl driver to use the new fdt_pinctrl interface.	2014-09-13 19:59:16 +00:00
if_ate.c	Mechanically convert to if_inc_counter().	2014-09-19 09:20:16 +00:00
if_atereg.h
if_macb.c	Mechanically convert to if_inc_counter().	2014-09-19 09:20:16 +00:00
if_macbreg.h
if_macbvar.h
std.at91
std.at91sam9
std.at91sam9g45
std.atmel	Remove the ARM_DEVICE_MULTIPASS option and make its effect be the default.	2014-10-26 18:30:35 +00:00
std.bwct
std.eb9200
std.ethernut5
std.hl200
std.hl201
std.kb920x
std.qila9g20
std.sam9g20ek
std.sam9x25ek
std.sam9260ek
std.sn9g45
std.tsc4370
uart_bus_at91usart.c
uart_cpu_at91usart.c
uart_dev_at91usart.c