9da68e5236
From Jake: Notify the iflib stack of whether we received any pause frames during the timer window. This allows the stack to avoid reporting a Tx hang due to the device being paused. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Submitted by: Jacob Keller <jacob.e.keller@intel.com> Reviewed by: gallatin@ Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D21869
4560 lines
145 KiB
C
4560 lines
145 KiB
C
/******************************************************************************
|
|
|
|
Copyright (c) 2001-2017, Intel Corporation
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice,
|
|
this list of conditions and the following disclaimer.
|
|
|
|
2. Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in the
|
|
documentation and/or other materials provided with the distribution.
|
|
|
|
3. Neither the name of the Intel Corporation nor the names of its
|
|
contributors may be used to endorse or promote products derived from
|
|
this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
******************************************************************************/
|
|
/*$FreeBSD$*/
|
|
|
|
|
|
#include "opt_inet.h"
|
|
#include "opt_inet6.h"
|
|
#include "opt_rss.h"
|
|
|
|
#include "ixgbe.h"
|
|
#include "ixgbe_sriov.h"
|
|
#include "ifdi_if.h"
|
|
|
|
#include <net/netmap.h>
|
|
#include <dev/netmap/netmap_kern.h>
|
|
|
|
/************************************************************************
|
|
* Driver version
|
|
************************************************************************/
|
|
char ixgbe_driver_version[] = "4.0.1-k";
|
|
|
|
|
|
/************************************************************************
|
|
* PCI Device ID Table
|
|
*
|
|
* Used by probe to select devices to load on
|
|
* Last field stores an index into ixgbe_strings
|
|
* Last entry must be all 0s
|
|
*
|
|
* { Vendor ID, Device ID, SubVendor ID, SubDevice ID, String Index }
|
|
************************************************************************/
|
|
static pci_vendor_info_t ixgbe_vendor_info_array[] =
|
|
{
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598AF_DUAL_PORT, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598AF_SINGLE_PORT, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598EB_CX4, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598AT, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598AT2, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598_DA_DUAL_PORT, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598_CX4_DUAL_PORT, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598EB_XF_LR, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598EB_SFP_LOM, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_KX4, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_KX4_MEZZ, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_SFP, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_XAUI_LOM, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_CX4, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_T3_LOM, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_COMBO_BACKPLANE, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_BACKPLANE_FCOE, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_SFP_SF2, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_SFP_FCOE, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599EN_SFP, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_SFP_SF_QP, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_QSFP_SF_QP, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X540T, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X540T1, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550T, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550T1, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_X_KR, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_X_KX4, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_X_10G_T, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_X_1G_T, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_X_SFP, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_A_KR, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_A_KR_L, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_A_SFP, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_A_SFP_N, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_A_SGMII, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_A_SGMII_L, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_A_10G_T, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_A_1G_T, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X550EM_A_1G_T_L, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_X540_BYPASS, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
PVID(IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_BYPASS, "Intel(R) PRO/10GbE PCI-Express Network Driver"),
|
|
/* required last entry */
|
|
PVID_END
|
|
};
|
|
|
|
static void *ixgbe_register(device_t dev);
|
|
static int ixgbe_if_attach_pre(if_ctx_t ctx);
|
|
static int ixgbe_if_attach_post(if_ctx_t ctx);
|
|
static int ixgbe_if_detach(if_ctx_t ctx);
|
|
static int ixgbe_if_shutdown(if_ctx_t ctx);
|
|
static int ixgbe_if_suspend(if_ctx_t ctx);
|
|
static int ixgbe_if_resume(if_ctx_t ctx);
|
|
|
|
static void ixgbe_if_stop(if_ctx_t ctx);
|
|
void ixgbe_if_enable_intr(if_ctx_t ctx);
|
|
static void ixgbe_if_disable_intr(if_ctx_t ctx);
|
|
static void ixgbe_link_intr_enable(if_ctx_t ctx);
|
|
static int ixgbe_if_rx_queue_intr_enable(if_ctx_t ctx, uint16_t qid);
|
|
static void ixgbe_if_media_status(if_ctx_t ctx, struct ifmediareq * ifmr);
|
|
static int ixgbe_if_media_change(if_ctx_t ctx);
|
|
static int ixgbe_if_msix_intr_assign(if_ctx_t, int);
|
|
static int ixgbe_if_mtu_set(if_ctx_t ctx, uint32_t mtu);
|
|
static void ixgbe_if_crcstrip_set(if_ctx_t ctx, int onoff, int strip);
|
|
static void ixgbe_if_multi_set(if_ctx_t ctx);
|
|
static int ixgbe_if_promisc_set(if_ctx_t ctx, int flags);
|
|
static int ixgbe_if_tx_queues_alloc(if_ctx_t ctx, caddr_t *vaddrs,
|
|
uint64_t *paddrs, int nrxqs, int nrxqsets);
|
|
static int ixgbe_if_rx_queues_alloc(if_ctx_t ctx, caddr_t *vaddrs,
|
|
uint64_t *paddrs, int nrxqs, int nrxqsets);
|
|
static void ixgbe_if_queues_free(if_ctx_t ctx);
|
|
static void ixgbe_if_timer(if_ctx_t ctx, uint16_t);
|
|
static void ixgbe_if_update_admin_status(if_ctx_t ctx);
|
|
static void ixgbe_if_vlan_register(if_ctx_t ctx, u16 vtag);
|
|
static void ixgbe_if_vlan_unregister(if_ctx_t ctx, u16 vtag);
|
|
static int ixgbe_if_i2c_req(if_ctx_t ctx, struct ifi2creq *req);
|
|
int ixgbe_intr(void *arg);
|
|
|
|
/************************************************************************
|
|
* Function prototypes
|
|
************************************************************************/
|
|
#if __FreeBSD_version >= 1100036
|
|
static uint64_t ixgbe_if_get_counter(if_ctx_t, ift_counter);
|
|
#endif
|
|
|
|
static void ixgbe_enable_queue(struct adapter *adapter, u32 vector);
|
|
static void ixgbe_disable_queue(struct adapter *adapter, u32 vector);
|
|
static void ixgbe_add_device_sysctls(if_ctx_t ctx);
|
|
static int ixgbe_allocate_pci_resources(if_ctx_t ctx);
|
|
static int ixgbe_setup_low_power_mode(if_ctx_t ctx);
|
|
|
|
static void ixgbe_config_dmac(struct adapter *adapter);
|
|
static void ixgbe_configure_ivars(struct adapter *adapter);
|
|
static void ixgbe_set_ivar(struct adapter *adapter, u8 entry, u8 vector,
|
|
s8 type);
|
|
static u8 *ixgbe_mc_array_itr(struct ixgbe_hw *, u8 **, u32 *);
|
|
static bool ixgbe_sfp_probe(if_ctx_t ctx);
|
|
|
|
static void ixgbe_free_pci_resources(if_ctx_t ctx);
|
|
|
|
static int ixgbe_msix_link(void *arg);
|
|
static int ixgbe_msix_que(void *arg);
|
|
static void ixgbe_initialize_rss_mapping(struct adapter *adapter);
|
|
static void ixgbe_initialize_receive_units(if_ctx_t ctx);
|
|
static void ixgbe_initialize_transmit_units(if_ctx_t ctx);
|
|
|
|
static int ixgbe_setup_interface(if_ctx_t ctx);
|
|
static void ixgbe_init_device_features(struct adapter *adapter);
|
|
static void ixgbe_check_fan_failure(struct adapter *, u32, bool);
|
|
static void ixgbe_add_media_types(if_ctx_t ctx);
|
|
static void ixgbe_update_stats_counters(struct adapter *adapter);
|
|
static void ixgbe_config_link(if_ctx_t ctx);
|
|
static void ixgbe_get_slot_info(struct adapter *);
|
|
static void ixgbe_check_wol_support(struct adapter *adapter);
|
|
static void ixgbe_enable_rx_drop(struct adapter *);
|
|
static void ixgbe_disable_rx_drop(struct adapter *);
|
|
|
|
static void ixgbe_add_hw_stats(struct adapter *adapter);
|
|
static int ixgbe_set_flowcntl(struct adapter *, int);
|
|
static int ixgbe_set_advertise(struct adapter *, int);
|
|
static int ixgbe_get_advertise(struct adapter *);
|
|
static void ixgbe_setup_vlan_hw_support(if_ctx_t ctx);
|
|
static void ixgbe_config_gpie(struct adapter *adapter);
|
|
static void ixgbe_config_delay_values(struct adapter *adapter);
|
|
|
|
/* Sysctl handlers */
|
|
static int ixgbe_sysctl_flowcntl(SYSCTL_HANDLER_ARGS);
|
|
static int ixgbe_sysctl_advertise(SYSCTL_HANDLER_ARGS);
|
|
static int ixgbe_sysctl_interrupt_rate_handler(SYSCTL_HANDLER_ARGS);
|
|
static int ixgbe_sysctl_dmac(SYSCTL_HANDLER_ARGS);
|
|
static int ixgbe_sysctl_phy_temp(SYSCTL_HANDLER_ARGS);
|
|
static int ixgbe_sysctl_phy_overtemp_occurred(SYSCTL_HANDLER_ARGS);
|
|
#ifdef IXGBE_DEBUG
|
|
static int ixgbe_sysctl_power_state(SYSCTL_HANDLER_ARGS);
|
|
static int ixgbe_sysctl_print_rss_config(SYSCTL_HANDLER_ARGS);
|
|
#endif
|
|
static int ixgbe_sysctl_rdh_handler(SYSCTL_HANDLER_ARGS);
|
|
static int ixgbe_sysctl_rdt_handler(SYSCTL_HANDLER_ARGS);
|
|
static int ixgbe_sysctl_tdt_handler(SYSCTL_HANDLER_ARGS);
|
|
static int ixgbe_sysctl_tdh_handler(SYSCTL_HANDLER_ARGS);
|
|
static int ixgbe_sysctl_eee_state(SYSCTL_HANDLER_ARGS);
|
|
static int ixgbe_sysctl_wol_enable(SYSCTL_HANDLER_ARGS);
|
|
static int ixgbe_sysctl_wufc(SYSCTL_HANDLER_ARGS);
|
|
|
|
/* Deferred interrupt tasklets */
|
|
static void ixgbe_handle_msf(void *);
|
|
static void ixgbe_handle_mod(void *);
|
|
static void ixgbe_handle_phy(void *);
|
|
|
|
/************************************************************************
|
|
* FreeBSD Device Interface Entry Points
|
|
************************************************************************/
|
|
static device_method_t ix_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_register, ixgbe_register),
|
|
DEVMETHOD(device_probe, iflib_device_probe),
|
|
DEVMETHOD(device_attach, iflib_device_attach),
|
|
DEVMETHOD(device_detach, iflib_device_detach),
|
|
DEVMETHOD(device_shutdown, iflib_device_shutdown),
|
|
DEVMETHOD(device_suspend, iflib_device_suspend),
|
|
DEVMETHOD(device_resume, iflib_device_resume),
|
|
#ifdef PCI_IOV
|
|
DEVMETHOD(pci_iov_init, iflib_device_iov_init),
|
|
DEVMETHOD(pci_iov_uninit, iflib_device_iov_uninit),
|
|
DEVMETHOD(pci_iov_add_vf, iflib_device_iov_add_vf),
|
|
#endif /* PCI_IOV */
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
static driver_t ix_driver = {
|
|
"ix", ix_methods, sizeof(struct adapter),
|
|
};
|
|
|
|
devclass_t ix_devclass;
|
|
DRIVER_MODULE(ix, pci, ix_driver, ix_devclass, 0, 0);
|
|
IFLIB_PNP_INFO(pci, ix_driver, ixgbe_vendor_info_array);
|
|
MODULE_DEPEND(ix, pci, 1, 1, 1);
|
|
MODULE_DEPEND(ix, ether, 1, 1, 1);
|
|
MODULE_DEPEND(ix, iflib, 1, 1, 1);
|
|
|
|
static device_method_t ixgbe_if_methods[] = {
|
|
DEVMETHOD(ifdi_attach_pre, ixgbe_if_attach_pre),
|
|
DEVMETHOD(ifdi_attach_post, ixgbe_if_attach_post),
|
|
DEVMETHOD(ifdi_detach, ixgbe_if_detach),
|
|
DEVMETHOD(ifdi_shutdown, ixgbe_if_shutdown),
|
|
DEVMETHOD(ifdi_suspend, ixgbe_if_suspend),
|
|
DEVMETHOD(ifdi_resume, ixgbe_if_resume),
|
|
DEVMETHOD(ifdi_init, ixgbe_if_init),
|
|
DEVMETHOD(ifdi_stop, ixgbe_if_stop),
|
|
DEVMETHOD(ifdi_msix_intr_assign, ixgbe_if_msix_intr_assign),
|
|
DEVMETHOD(ifdi_intr_enable, ixgbe_if_enable_intr),
|
|
DEVMETHOD(ifdi_intr_disable, ixgbe_if_disable_intr),
|
|
DEVMETHOD(ifdi_link_intr_enable, ixgbe_link_intr_enable),
|
|
DEVMETHOD(ifdi_tx_queue_intr_enable, ixgbe_if_rx_queue_intr_enable),
|
|
DEVMETHOD(ifdi_rx_queue_intr_enable, ixgbe_if_rx_queue_intr_enable),
|
|
DEVMETHOD(ifdi_tx_queues_alloc, ixgbe_if_tx_queues_alloc),
|
|
DEVMETHOD(ifdi_rx_queues_alloc, ixgbe_if_rx_queues_alloc),
|
|
DEVMETHOD(ifdi_queues_free, ixgbe_if_queues_free),
|
|
DEVMETHOD(ifdi_update_admin_status, ixgbe_if_update_admin_status),
|
|
DEVMETHOD(ifdi_multi_set, ixgbe_if_multi_set),
|
|
DEVMETHOD(ifdi_mtu_set, ixgbe_if_mtu_set),
|
|
DEVMETHOD(ifdi_crcstrip_set, ixgbe_if_crcstrip_set),
|
|
DEVMETHOD(ifdi_media_status, ixgbe_if_media_status),
|
|
DEVMETHOD(ifdi_media_change, ixgbe_if_media_change),
|
|
DEVMETHOD(ifdi_promisc_set, ixgbe_if_promisc_set),
|
|
DEVMETHOD(ifdi_timer, ixgbe_if_timer),
|
|
DEVMETHOD(ifdi_vlan_register, ixgbe_if_vlan_register),
|
|
DEVMETHOD(ifdi_vlan_unregister, ixgbe_if_vlan_unregister),
|
|
DEVMETHOD(ifdi_get_counter, ixgbe_if_get_counter),
|
|
DEVMETHOD(ifdi_i2c_req, ixgbe_if_i2c_req),
|
|
#ifdef PCI_IOV
|
|
DEVMETHOD(ifdi_iov_init, ixgbe_if_iov_init),
|
|
DEVMETHOD(ifdi_iov_uninit, ixgbe_if_iov_uninit),
|
|
DEVMETHOD(ifdi_iov_vf_add, ixgbe_if_iov_vf_add),
|
|
#endif /* PCI_IOV */
|
|
DEVMETHOD_END
|
|
};
|
|
|
|
/*
|
|
* TUNEABLE PARAMETERS:
|
|
*/
|
|
|
|
static SYSCTL_NODE(_hw, OID_AUTO, ix, CTLFLAG_RD, 0, "IXGBE driver parameters");
|
|
static driver_t ixgbe_if_driver = {
|
|
"ixgbe_if", ixgbe_if_methods, sizeof(struct adapter)
|
|
};
|
|
|
|
static int ixgbe_max_interrupt_rate = (4000000 / IXGBE_LOW_LATENCY);
|
|
SYSCTL_INT(_hw_ix, OID_AUTO, max_interrupt_rate, CTLFLAG_RDTUN,
|
|
&ixgbe_max_interrupt_rate, 0, "Maximum interrupts per second");
|
|
|
|
/* Flow control setting, default to full */
|
|
static int ixgbe_flow_control = ixgbe_fc_full;
|
|
SYSCTL_INT(_hw_ix, OID_AUTO, flow_control, CTLFLAG_RDTUN,
|
|
&ixgbe_flow_control, 0, "Default flow control used for all adapters");
|
|
|
|
/* Advertise Speed, default to 0 (auto) */
|
|
static int ixgbe_advertise_speed = 0;
|
|
SYSCTL_INT(_hw_ix, OID_AUTO, advertise_speed, CTLFLAG_RDTUN,
|
|
&ixgbe_advertise_speed, 0, "Default advertised speed for all adapters");
|
|
|
|
/*
|
|
* Smart speed setting, default to on
|
|
* this only works as a compile option
|
|
* right now as its during attach, set
|
|
* this to 'ixgbe_smart_speed_off' to
|
|
* disable.
|
|
*/
|
|
static int ixgbe_smart_speed = ixgbe_smart_speed_on;
|
|
|
|
/*
|
|
* MSI-X should be the default for best performance,
|
|
* but this allows it to be forced off for testing.
|
|
*/
|
|
static int ixgbe_enable_msix = 1;
|
|
SYSCTL_INT(_hw_ix, OID_AUTO, enable_msix, CTLFLAG_RDTUN, &ixgbe_enable_msix, 0,
|
|
"Enable MSI-X interrupts");
|
|
|
|
/*
|
|
* Defining this on will allow the use
|
|
* of unsupported SFP+ modules, note that
|
|
* doing so you are on your own :)
|
|
*/
|
|
static int allow_unsupported_sfp = FALSE;
|
|
SYSCTL_INT(_hw_ix, OID_AUTO, unsupported_sfp, CTLFLAG_RDTUN,
|
|
&allow_unsupported_sfp, 0,
|
|
"Allow unsupported SFP modules...use at your own risk");
|
|
|
|
/*
|
|
* Not sure if Flow Director is fully baked,
|
|
* so we'll default to turning it off.
|
|
*/
|
|
static int ixgbe_enable_fdir = 0;
|
|
SYSCTL_INT(_hw_ix, OID_AUTO, enable_fdir, CTLFLAG_RDTUN, &ixgbe_enable_fdir, 0,
|
|
"Enable Flow Director");
|
|
|
|
/* Receive-Side Scaling */
|
|
static int ixgbe_enable_rss = 1;
|
|
SYSCTL_INT(_hw_ix, OID_AUTO, enable_rss, CTLFLAG_RDTUN, &ixgbe_enable_rss, 0,
|
|
"Enable Receive-Side Scaling (RSS)");
|
|
|
|
#if 0
|
|
/* Keep running tab on them for sanity check */
|
|
static int ixgbe_total_ports;
|
|
#endif
|
|
|
|
MALLOC_DEFINE(M_IXGBE, "ix", "ix driver allocations");
|
|
|
|
/*
|
|
* For Flow Director: this is the number of TX packets we sample
|
|
* for the filter pool, this means every 20th packet will be probed.
|
|
*
|
|
* This feature can be disabled by setting this to 0.
|
|
*/
|
|
static int atr_sample_rate = 20;
|
|
|
|
extern struct if_txrx ixgbe_txrx;
|
|
|
|
static struct if_shared_ctx ixgbe_sctx_init = {
|
|
.isc_magic = IFLIB_MAGIC,
|
|
.isc_q_align = PAGE_SIZE,/* max(DBA_ALIGN, PAGE_SIZE) */
|
|
.isc_tx_maxsize = IXGBE_TSO_SIZE + sizeof(struct ether_vlan_header),
|
|
.isc_tx_maxsegsize = PAGE_SIZE,
|
|
.isc_tso_maxsize = IXGBE_TSO_SIZE + sizeof(struct ether_vlan_header),
|
|
.isc_tso_maxsegsize = PAGE_SIZE,
|
|
.isc_rx_maxsize = PAGE_SIZE*4,
|
|
.isc_rx_nsegments = 1,
|
|
.isc_rx_maxsegsize = PAGE_SIZE*4,
|
|
.isc_nfl = 1,
|
|
.isc_ntxqs = 1,
|
|
.isc_nrxqs = 1,
|
|
|
|
.isc_admin_intrcnt = 1,
|
|
.isc_vendor_info = ixgbe_vendor_info_array,
|
|
.isc_driver_version = ixgbe_driver_version,
|
|
.isc_driver = &ixgbe_if_driver,
|
|
.isc_flags = IFLIB_TSO_INIT_IP,
|
|
|
|
.isc_nrxd_min = {MIN_RXD},
|
|
.isc_ntxd_min = {MIN_TXD},
|
|
.isc_nrxd_max = {MAX_RXD},
|
|
.isc_ntxd_max = {MAX_TXD},
|
|
.isc_nrxd_default = {DEFAULT_RXD},
|
|
.isc_ntxd_default = {DEFAULT_TXD},
|
|
};
|
|
|
|
if_shared_ctx_t ixgbe_sctx = &ixgbe_sctx_init;
|
|
|
|
/************************************************************************
|
|
* ixgbe_if_tx_queues_alloc
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_if_tx_queues_alloc(if_ctx_t ctx, caddr_t *vaddrs, uint64_t *paddrs,
|
|
int ntxqs, int ntxqsets)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
if_softc_ctx_t scctx = adapter->shared;
|
|
struct ix_tx_queue *que;
|
|
int i, j, error;
|
|
|
|
MPASS(adapter->num_tx_queues > 0);
|
|
MPASS(adapter->num_tx_queues == ntxqsets);
|
|
MPASS(ntxqs == 1);
|
|
|
|
/* Allocate queue structure memory */
|
|
adapter->tx_queues =
|
|
(struct ix_tx_queue *)malloc(sizeof(struct ix_tx_queue) * ntxqsets,
|
|
M_IXGBE, M_NOWAIT | M_ZERO);
|
|
if (!adapter->tx_queues) {
|
|
device_printf(iflib_get_dev(ctx),
|
|
"Unable to allocate TX ring memory\n");
|
|
return (ENOMEM);
|
|
}
|
|
|
|
for (i = 0, que = adapter->tx_queues; i < ntxqsets; i++, que++) {
|
|
struct tx_ring *txr = &que->txr;
|
|
|
|
/* In case SR-IOV is enabled, align the index properly */
|
|
txr->me = ixgbe_vf_que_index(adapter->iov_mode, adapter->pool,
|
|
i);
|
|
|
|
txr->adapter = que->adapter = adapter;
|
|
|
|
/* Allocate report status array */
|
|
txr->tx_rsq = (qidx_t *)malloc(sizeof(qidx_t) * scctx->isc_ntxd[0], M_IXGBE, M_NOWAIT | M_ZERO);
|
|
if (txr->tx_rsq == NULL) {
|
|
error = ENOMEM;
|
|
goto fail;
|
|
}
|
|
for (j = 0; j < scctx->isc_ntxd[0]; j++)
|
|
txr->tx_rsq[j] = QIDX_INVALID;
|
|
/* get the virtual and physical address of the hardware queues */
|
|
txr->tail = IXGBE_TDT(txr->me);
|
|
txr->tx_base = (union ixgbe_adv_tx_desc *)vaddrs[i];
|
|
txr->tx_paddr = paddrs[i];
|
|
|
|
txr->bytes = 0;
|
|
txr->total_packets = 0;
|
|
|
|
/* Set the rate at which we sample packets */
|
|
if (adapter->feat_en & IXGBE_FEATURE_FDIR)
|
|
txr->atr_sample = atr_sample_rate;
|
|
|
|
}
|
|
|
|
device_printf(iflib_get_dev(ctx), "allocated for %d queues\n",
|
|
adapter->num_tx_queues);
|
|
|
|
return (0);
|
|
|
|
fail:
|
|
ixgbe_if_queues_free(ctx);
|
|
|
|
return (error);
|
|
} /* ixgbe_if_tx_queues_alloc */
|
|
|
|
/************************************************************************
|
|
* ixgbe_if_rx_queues_alloc
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_if_rx_queues_alloc(if_ctx_t ctx, caddr_t *vaddrs, uint64_t *paddrs,
|
|
int nrxqs, int nrxqsets)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
struct ix_rx_queue *que;
|
|
int i;
|
|
|
|
MPASS(adapter->num_rx_queues > 0);
|
|
MPASS(adapter->num_rx_queues == nrxqsets);
|
|
MPASS(nrxqs == 1);
|
|
|
|
/* Allocate queue structure memory */
|
|
adapter->rx_queues =
|
|
(struct ix_rx_queue *)malloc(sizeof(struct ix_rx_queue)*nrxqsets,
|
|
M_IXGBE, M_NOWAIT | M_ZERO);
|
|
if (!adapter->rx_queues) {
|
|
device_printf(iflib_get_dev(ctx),
|
|
"Unable to allocate TX ring memory\n");
|
|
return (ENOMEM);
|
|
}
|
|
|
|
for (i = 0, que = adapter->rx_queues; i < nrxqsets; i++, que++) {
|
|
struct rx_ring *rxr = &que->rxr;
|
|
|
|
/* In case SR-IOV is enabled, align the index properly */
|
|
rxr->me = ixgbe_vf_que_index(adapter->iov_mode, adapter->pool,
|
|
i);
|
|
|
|
rxr->adapter = que->adapter = adapter;
|
|
|
|
/* get the virtual and physical address of the hw queues */
|
|
rxr->tail = IXGBE_RDT(rxr->me);
|
|
rxr->rx_base = (union ixgbe_adv_rx_desc *)vaddrs[i];
|
|
rxr->rx_paddr = paddrs[i];
|
|
rxr->bytes = 0;
|
|
rxr->que = que;
|
|
}
|
|
|
|
device_printf(iflib_get_dev(ctx), "allocated for %d rx queues\n",
|
|
adapter->num_rx_queues);
|
|
|
|
return (0);
|
|
} /* ixgbe_if_rx_queues_alloc */
|
|
|
|
/************************************************************************
|
|
* ixgbe_if_queues_free
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_if_queues_free(if_ctx_t ctx)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
struct ix_tx_queue *tx_que = adapter->tx_queues;
|
|
struct ix_rx_queue *rx_que = adapter->rx_queues;
|
|
int i;
|
|
|
|
if (tx_que != NULL) {
|
|
for (i = 0; i < adapter->num_tx_queues; i++, tx_que++) {
|
|
struct tx_ring *txr = &tx_que->txr;
|
|
if (txr->tx_rsq == NULL)
|
|
break;
|
|
|
|
free(txr->tx_rsq, M_IXGBE);
|
|
txr->tx_rsq = NULL;
|
|
}
|
|
|
|
free(adapter->tx_queues, M_IXGBE);
|
|
adapter->tx_queues = NULL;
|
|
}
|
|
if (rx_que != NULL) {
|
|
free(adapter->rx_queues, M_IXGBE);
|
|
adapter->rx_queues = NULL;
|
|
}
|
|
} /* ixgbe_if_queues_free */
|
|
|
|
/************************************************************************
|
|
* ixgbe_initialize_rss_mapping
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_initialize_rss_mapping(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 reta = 0, mrqc, rss_key[10];
|
|
int queue_id, table_size, index_mult;
|
|
int i, j;
|
|
u32 rss_hash_config;
|
|
|
|
if (adapter->feat_en & IXGBE_FEATURE_RSS) {
|
|
/* Fetch the configured RSS key */
|
|
rss_getkey((uint8_t *)&rss_key);
|
|
} else {
|
|
/* set up random bits */
|
|
arc4rand(&rss_key, sizeof(rss_key), 0);
|
|
}
|
|
|
|
/* Set multiplier for RETA setup and table size based on MAC */
|
|
index_mult = 0x1;
|
|
table_size = 128;
|
|
switch (adapter->hw.mac.type) {
|
|
case ixgbe_mac_82598EB:
|
|
index_mult = 0x11;
|
|
break;
|
|
case ixgbe_mac_X550:
|
|
case ixgbe_mac_X550EM_x:
|
|
case ixgbe_mac_X550EM_a:
|
|
table_size = 512;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Set up the redirection table */
|
|
for (i = 0, j = 0; i < table_size; i++, j++) {
|
|
if (j == adapter->num_rx_queues)
|
|
j = 0;
|
|
|
|
if (adapter->feat_en & IXGBE_FEATURE_RSS) {
|
|
/*
|
|
* Fetch the RSS bucket id for the given indirection
|
|
* entry. Cap it at the number of configured buckets
|
|
* (which is num_rx_queues.)
|
|
*/
|
|
queue_id = rss_get_indirection_to_bucket(i);
|
|
queue_id = queue_id % adapter->num_rx_queues;
|
|
} else
|
|
queue_id = (j * index_mult);
|
|
|
|
/*
|
|
* The low 8 bits are for hash value (n+0);
|
|
* The next 8 bits are for hash value (n+1), etc.
|
|
*/
|
|
reta = reta >> 8;
|
|
reta = reta | (((uint32_t)queue_id) << 24);
|
|
if ((i & 3) == 3) {
|
|
if (i < 128)
|
|
IXGBE_WRITE_REG(hw, IXGBE_RETA(i >> 2), reta);
|
|
else
|
|
IXGBE_WRITE_REG(hw, IXGBE_ERETA((i >> 2) - 32),
|
|
reta);
|
|
reta = 0;
|
|
}
|
|
}
|
|
|
|
/* Now fill our hash function seeds */
|
|
for (i = 0; i < 10; i++)
|
|
IXGBE_WRITE_REG(hw, IXGBE_RSSRK(i), rss_key[i]);
|
|
|
|
/* Perform hash on these packet types */
|
|
if (adapter->feat_en & IXGBE_FEATURE_RSS)
|
|
rss_hash_config = rss_gethashconfig();
|
|
else {
|
|
/*
|
|
* Disable UDP - IP fragments aren't currently being handled
|
|
* and so we end up with a mix of 2-tuple and 4-tuple
|
|
* traffic.
|
|
*/
|
|
rss_hash_config = RSS_HASHTYPE_RSS_IPV4
|
|
| RSS_HASHTYPE_RSS_TCP_IPV4
|
|
| RSS_HASHTYPE_RSS_IPV6
|
|
| RSS_HASHTYPE_RSS_TCP_IPV6
|
|
| RSS_HASHTYPE_RSS_IPV6_EX
|
|
| RSS_HASHTYPE_RSS_TCP_IPV6_EX;
|
|
}
|
|
|
|
mrqc = IXGBE_MRQC_RSSEN;
|
|
if (rss_hash_config & RSS_HASHTYPE_RSS_IPV4)
|
|
mrqc |= IXGBE_MRQC_RSS_FIELD_IPV4;
|
|
if (rss_hash_config & RSS_HASHTYPE_RSS_TCP_IPV4)
|
|
mrqc |= IXGBE_MRQC_RSS_FIELD_IPV4_TCP;
|
|
if (rss_hash_config & RSS_HASHTYPE_RSS_IPV6)
|
|
mrqc |= IXGBE_MRQC_RSS_FIELD_IPV6;
|
|
if (rss_hash_config & RSS_HASHTYPE_RSS_TCP_IPV6)
|
|
mrqc |= IXGBE_MRQC_RSS_FIELD_IPV6_TCP;
|
|
if (rss_hash_config & RSS_HASHTYPE_RSS_IPV6_EX)
|
|
mrqc |= IXGBE_MRQC_RSS_FIELD_IPV6_EX;
|
|
if (rss_hash_config & RSS_HASHTYPE_RSS_TCP_IPV6_EX)
|
|
mrqc |= IXGBE_MRQC_RSS_FIELD_IPV6_EX_TCP;
|
|
if (rss_hash_config & RSS_HASHTYPE_RSS_UDP_IPV4)
|
|
mrqc |= IXGBE_MRQC_RSS_FIELD_IPV4_UDP;
|
|
if (rss_hash_config & RSS_HASHTYPE_RSS_UDP_IPV6)
|
|
mrqc |= IXGBE_MRQC_RSS_FIELD_IPV6_UDP;
|
|
if (rss_hash_config & RSS_HASHTYPE_RSS_UDP_IPV6_EX)
|
|
mrqc |= IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP;
|
|
mrqc |= ixgbe_get_mrqc(adapter->iov_mode);
|
|
IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc);
|
|
} /* ixgbe_initialize_rss_mapping */
|
|
|
|
/************************************************************************
|
|
* ixgbe_initialize_receive_units - Setup receive registers and features.
|
|
************************************************************************/
|
|
#define BSIZEPKT_ROUNDUP ((1<<IXGBE_SRRCTL_BSIZEPKT_SHIFT)-1)
|
|
|
|
static void
|
|
ixgbe_initialize_receive_units(if_ctx_t ctx)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
if_softc_ctx_t scctx = adapter->shared;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct ifnet *ifp = iflib_get_ifp(ctx);
|
|
struct ix_rx_queue *que;
|
|
int i, j;
|
|
u32 bufsz, fctrl, srrctl, rxcsum;
|
|
u32 hlreg;
|
|
|
|
/*
|
|
* Make sure receives are disabled while
|
|
* setting up the descriptor ring
|
|
*/
|
|
ixgbe_disable_rx(hw);
|
|
|
|
/* Enable broadcasts */
|
|
fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
|
|
fctrl |= IXGBE_FCTRL_BAM;
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
|
|
fctrl |= IXGBE_FCTRL_DPF;
|
|
fctrl |= IXGBE_FCTRL_PMCF;
|
|
}
|
|
IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
|
|
|
|
/* Set for Jumbo Frames? */
|
|
hlreg = IXGBE_READ_REG(hw, IXGBE_HLREG0);
|
|
if (ifp->if_mtu > ETHERMTU)
|
|
hlreg |= IXGBE_HLREG0_JUMBOEN;
|
|
else
|
|
hlreg &= ~IXGBE_HLREG0_JUMBOEN;
|
|
IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg);
|
|
|
|
bufsz = (adapter->rx_mbuf_sz + BSIZEPKT_ROUNDUP) >>
|
|
IXGBE_SRRCTL_BSIZEPKT_SHIFT;
|
|
|
|
/* Setup the Base and Length of the Rx Descriptor Ring */
|
|
for (i = 0, que = adapter->rx_queues; i < adapter->num_rx_queues; i++, que++) {
|
|
struct rx_ring *rxr = &que->rxr;
|
|
u64 rdba = rxr->rx_paddr;
|
|
|
|
j = rxr->me;
|
|
|
|
/* Setup the Base and Length of the Rx Descriptor Ring */
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDBAL(j),
|
|
(rdba & 0x00000000ffffffffULL));
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDBAH(j), (rdba >> 32));
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDLEN(j),
|
|
scctx->isc_nrxd[0] * sizeof(union ixgbe_adv_rx_desc));
|
|
|
|
/* Set up the SRRCTL register */
|
|
srrctl = IXGBE_READ_REG(hw, IXGBE_SRRCTL(j));
|
|
srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK;
|
|
srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK;
|
|
srrctl |= bufsz;
|
|
srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
|
|
|
|
/*
|
|
* Set DROP_EN iff we have no flow control and >1 queue.
|
|
* Note that srrctl was cleared shortly before during reset,
|
|
* so we do not need to clear the bit, but do it just in case
|
|
* this code is moved elsewhere.
|
|
*/
|
|
if (adapter->num_rx_queues > 1 &&
|
|
adapter->hw.fc.requested_mode == ixgbe_fc_none) {
|
|
srrctl |= IXGBE_SRRCTL_DROP_EN;
|
|
} else {
|
|
srrctl &= ~IXGBE_SRRCTL_DROP_EN;
|
|
}
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(j), srrctl);
|
|
|
|
/* Setup the HW Rx Head and Tail Descriptor Pointers */
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDH(j), 0);
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDT(j), 0);
|
|
|
|
/* Set the driver rx tail address */
|
|
rxr->tail = IXGBE_RDT(rxr->me);
|
|
}
|
|
|
|
if (adapter->hw.mac.type != ixgbe_mac_82598EB) {
|
|
u32 psrtype = IXGBE_PSRTYPE_TCPHDR
|
|
| IXGBE_PSRTYPE_UDPHDR
|
|
| IXGBE_PSRTYPE_IPV4HDR
|
|
| IXGBE_PSRTYPE_IPV6HDR;
|
|
IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(0), psrtype);
|
|
}
|
|
|
|
rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM);
|
|
|
|
ixgbe_initialize_rss_mapping(adapter);
|
|
|
|
if (adapter->num_rx_queues > 1) {
|
|
/* RSS and RX IPP Checksum are mutually exclusive */
|
|
rxcsum |= IXGBE_RXCSUM_PCSD;
|
|
}
|
|
|
|
if (ifp->if_capenable & IFCAP_RXCSUM)
|
|
rxcsum |= IXGBE_RXCSUM_PCSD;
|
|
|
|
/* This is useful for calculating UDP/IP fragment checksums */
|
|
if (!(rxcsum & IXGBE_RXCSUM_PCSD))
|
|
rxcsum |= IXGBE_RXCSUM_IPPCSE;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum);
|
|
|
|
} /* ixgbe_initialize_receive_units */
|
|
|
|
/************************************************************************
|
|
* ixgbe_initialize_transmit_units - Enable transmit units.
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_initialize_transmit_units(if_ctx_t ctx)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
if_softc_ctx_t scctx = adapter->shared;
|
|
struct ix_tx_queue *que;
|
|
int i;
|
|
|
|
/* Setup the Base and Length of the Tx Descriptor Ring */
|
|
for (i = 0, que = adapter->tx_queues; i < adapter->num_tx_queues;
|
|
i++, que++) {
|
|
struct tx_ring *txr = &que->txr;
|
|
u64 tdba = txr->tx_paddr;
|
|
u32 txctrl = 0;
|
|
int j = txr->me;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDBAL(j),
|
|
(tdba & 0x00000000ffffffffULL));
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDBAH(j), (tdba >> 32));
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDLEN(j),
|
|
scctx->isc_ntxd[0] * sizeof(union ixgbe_adv_tx_desc));
|
|
|
|
/* Setup the HW Tx Head and Tail descriptor pointers */
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDH(j), 0);
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDT(j), 0);
|
|
|
|
/* Cache the tail address */
|
|
txr->tail = IXGBE_TDT(txr->me);
|
|
|
|
txr->tx_rs_cidx = txr->tx_rs_pidx;
|
|
txr->tx_cidx_processed = scctx->isc_ntxd[0] - 1;
|
|
for (int k = 0; k < scctx->isc_ntxd[0]; k++)
|
|
txr->tx_rsq[k] = QIDX_INVALID;
|
|
|
|
/* Disable Head Writeback */
|
|
/*
|
|
* Note: for X550 series devices, these registers are actually
|
|
* prefixed with TPH_ isntead of DCA_, but the addresses and
|
|
* fields remain the same.
|
|
*/
|
|
switch (hw->mac.type) {
|
|
case ixgbe_mac_82598EB:
|
|
txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL(j));
|
|
break;
|
|
default:
|
|
txctrl = IXGBE_READ_REG(hw, IXGBE_DCA_TXCTRL_82599(j));
|
|
break;
|
|
}
|
|
txctrl &= ~IXGBE_DCA_TXCTRL_DESC_WRO_EN;
|
|
switch (hw->mac.type) {
|
|
case ixgbe_mac_82598EB:
|
|
IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL(j), txctrl);
|
|
break;
|
|
default:
|
|
IXGBE_WRITE_REG(hw, IXGBE_DCA_TXCTRL_82599(j), txctrl);
|
|
break;
|
|
}
|
|
|
|
}
|
|
|
|
if (hw->mac.type != ixgbe_mac_82598EB) {
|
|
u32 dmatxctl, rttdcs;
|
|
|
|
dmatxctl = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
|
|
dmatxctl |= IXGBE_DMATXCTL_TE;
|
|
IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, dmatxctl);
|
|
/* Disable arbiter to set MTQC */
|
|
rttdcs = IXGBE_READ_REG(hw, IXGBE_RTTDCS);
|
|
rttdcs |= IXGBE_RTTDCS_ARBDIS;
|
|
IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs);
|
|
IXGBE_WRITE_REG(hw, IXGBE_MTQC,
|
|
ixgbe_get_mtqc(adapter->iov_mode));
|
|
rttdcs &= ~IXGBE_RTTDCS_ARBDIS;
|
|
IXGBE_WRITE_REG(hw, IXGBE_RTTDCS, rttdcs);
|
|
}
|
|
|
|
} /* ixgbe_initialize_transmit_units */
|
|
|
|
/************************************************************************
|
|
* ixgbe_register
|
|
************************************************************************/
|
|
static void *
|
|
ixgbe_register(device_t dev)
|
|
{
|
|
return (ixgbe_sctx);
|
|
} /* ixgbe_register */
|
|
|
|
/************************************************************************
|
|
* ixgbe_if_attach_pre - Device initialization routine, part 1
|
|
*
|
|
* Called when the driver is being loaded.
|
|
* Identifies the type of hardware, initializes the hardware,
|
|
* and initializes iflib structures.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_if_attach_pre(if_ctx_t ctx)
|
|
{
|
|
struct adapter *adapter;
|
|
device_t dev;
|
|
if_softc_ctx_t scctx;
|
|
struct ixgbe_hw *hw;
|
|
int error = 0;
|
|
u32 ctrl_ext;
|
|
|
|
INIT_DEBUGOUT("ixgbe_attach: begin");
|
|
|
|
/* Allocate, clear, and link in our adapter structure */
|
|
dev = iflib_get_dev(ctx);
|
|
adapter = iflib_get_softc(ctx);
|
|
adapter->hw.back = adapter;
|
|
adapter->ctx = ctx;
|
|
adapter->dev = dev;
|
|
scctx = adapter->shared = iflib_get_softc_ctx(ctx);
|
|
adapter->media = iflib_get_media(ctx);
|
|
hw = &adapter->hw;
|
|
|
|
/* Determine hardware revision */
|
|
hw->vendor_id = pci_get_vendor(dev);
|
|
hw->device_id = pci_get_device(dev);
|
|
hw->revision_id = pci_get_revid(dev);
|
|
hw->subsystem_vendor_id = pci_get_subvendor(dev);
|
|
hw->subsystem_device_id = pci_get_subdevice(dev);
|
|
|
|
/* Do base PCI setup - map BAR0 */
|
|
if (ixgbe_allocate_pci_resources(ctx)) {
|
|
device_printf(dev, "Allocation of PCI resources failed\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
/* let hardware know driver is loaded */
|
|
ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
|
|
ctrl_ext |= IXGBE_CTRL_EXT_DRV_LOAD;
|
|
IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
|
|
|
|
/*
|
|
* Initialize the shared code
|
|
*/
|
|
if (ixgbe_init_shared_code(hw) != 0) {
|
|
device_printf(dev, "Unable to initialize the shared code\n");
|
|
error = ENXIO;
|
|
goto err_pci;
|
|
}
|
|
|
|
if (hw->mbx.ops.init_params)
|
|
hw->mbx.ops.init_params(hw);
|
|
|
|
hw->allow_unsupported_sfp = allow_unsupported_sfp;
|
|
|
|
if (hw->mac.type != ixgbe_mac_82598EB)
|
|
hw->phy.smart_speed = ixgbe_smart_speed;
|
|
|
|
ixgbe_init_device_features(adapter);
|
|
|
|
/* Enable WoL (if supported) */
|
|
ixgbe_check_wol_support(adapter);
|
|
|
|
/* Verify adapter fan is still functional (if applicable) */
|
|
if (adapter->feat_en & IXGBE_FEATURE_FAN_FAIL) {
|
|
u32 esdp = IXGBE_READ_REG(hw, IXGBE_ESDP);
|
|
ixgbe_check_fan_failure(adapter, esdp, FALSE);
|
|
}
|
|
|
|
/* Ensure SW/FW semaphore is free */
|
|
ixgbe_init_swfw_semaphore(hw);
|
|
|
|
/* Set an initial default flow control value */
|
|
hw->fc.requested_mode = ixgbe_flow_control;
|
|
|
|
hw->phy.reset_if_overtemp = TRUE;
|
|
error = ixgbe_reset_hw(hw);
|
|
hw->phy.reset_if_overtemp = FALSE;
|
|
if (error == IXGBE_ERR_SFP_NOT_PRESENT) {
|
|
/*
|
|
* No optics in this port, set up
|
|
* so the timer routine will probe
|
|
* for later insertion.
|
|
*/
|
|
adapter->sfp_probe = TRUE;
|
|
error = 0;
|
|
} else if (error == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
device_printf(dev, "Unsupported SFP+ module detected!\n");
|
|
error = EIO;
|
|
goto err_pci;
|
|
} else if (error) {
|
|
device_printf(dev, "Hardware initialization failed\n");
|
|
error = EIO;
|
|
goto err_pci;
|
|
}
|
|
|
|
/* Make sure we have a good EEPROM before we read from it */
|
|
if (ixgbe_validate_eeprom_checksum(&adapter->hw, NULL) < 0) {
|
|
device_printf(dev, "The EEPROM Checksum Is Not Valid\n");
|
|
error = EIO;
|
|
goto err_pci;
|
|
}
|
|
|
|
error = ixgbe_start_hw(hw);
|
|
switch (error) {
|
|
case IXGBE_ERR_EEPROM_VERSION:
|
|
device_printf(dev, "This device is a pre-production adapter/LOM. Please be aware there may be issues associated with your hardware.\nIf you are experiencing problems please contact your Intel or hardware representative who provided you with this hardware.\n");
|
|
break;
|
|
case IXGBE_ERR_SFP_NOT_SUPPORTED:
|
|
device_printf(dev, "Unsupported SFP+ Module\n");
|
|
error = EIO;
|
|
goto err_pci;
|
|
case IXGBE_ERR_SFP_NOT_PRESENT:
|
|
device_printf(dev, "No SFP+ Module found\n");
|
|
/* falls thru */
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Most of the iflib initialization... */
|
|
|
|
iflib_set_mac(ctx, hw->mac.addr);
|
|
switch (adapter->hw.mac.type) {
|
|
case ixgbe_mac_X550:
|
|
case ixgbe_mac_X550EM_x:
|
|
case ixgbe_mac_X550EM_a:
|
|
scctx->isc_rss_table_size = 512;
|
|
scctx->isc_ntxqsets_max = scctx->isc_nrxqsets_max = 64;
|
|
break;
|
|
default:
|
|
scctx->isc_rss_table_size = 128;
|
|
scctx->isc_ntxqsets_max = scctx->isc_nrxqsets_max = 16;
|
|
}
|
|
|
|
/* Allow legacy interrupts */
|
|
ixgbe_txrx.ift_legacy_intr = ixgbe_intr;
|
|
|
|
scctx->isc_txqsizes[0] =
|
|
roundup2(scctx->isc_ntxd[0] * sizeof(union ixgbe_adv_tx_desc) +
|
|
sizeof(u32), DBA_ALIGN),
|
|
scctx->isc_rxqsizes[0] =
|
|
roundup2(scctx->isc_nrxd[0] * sizeof(union ixgbe_adv_rx_desc),
|
|
DBA_ALIGN);
|
|
|
|
/* XXX */
|
|
scctx->isc_tx_csum_flags = CSUM_IP | CSUM_TCP | CSUM_UDP | CSUM_TSO |
|
|
CSUM_IP6_TCP | CSUM_IP6_UDP | CSUM_IP6_TSO;
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
|
|
scctx->isc_tx_nsegments = IXGBE_82598_SCATTER;
|
|
} else {
|
|
scctx->isc_tx_csum_flags |= CSUM_SCTP |CSUM_IP6_SCTP;
|
|
scctx->isc_tx_nsegments = IXGBE_82599_SCATTER;
|
|
}
|
|
|
|
scctx->isc_msix_bar = pci_msix_table_bar(dev);
|
|
|
|
scctx->isc_tx_tso_segments_max = scctx->isc_tx_nsegments;
|
|
scctx->isc_tx_tso_size_max = IXGBE_TSO_SIZE;
|
|
scctx->isc_tx_tso_segsize_max = PAGE_SIZE;
|
|
|
|
scctx->isc_txrx = &ixgbe_txrx;
|
|
|
|
scctx->isc_capabilities = scctx->isc_capenable = IXGBE_CAPS;
|
|
|
|
return (0);
|
|
|
|
err_pci:
|
|
ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT);
|
|
ctrl_ext &= ~IXGBE_CTRL_EXT_DRV_LOAD;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, ctrl_ext);
|
|
ixgbe_free_pci_resources(ctx);
|
|
|
|
return (error);
|
|
} /* ixgbe_if_attach_pre */
|
|
|
|
/*********************************************************************
|
|
* ixgbe_if_attach_post - Device initialization routine, part 2
|
|
*
|
|
* Called during driver load, but after interrupts and
|
|
* resources have been allocated and configured.
|
|
* Sets up some data structures not relevant to iflib.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
*********************************************************************/
|
|
static int
|
|
ixgbe_if_attach_post(if_ctx_t ctx)
|
|
{
|
|
device_t dev;
|
|
struct adapter *adapter;
|
|
struct ixgbe_hw *hw;
|
|
int error = 0;
|
|
|
|
dev = iflib_get_dev(ctx);
|
|
adapter = iflib_get_softc(ctx);
|
|
hw = &adapter->hw;
|
|
|
|
|
|
if (adapter->intr_type == IFLIB_INTR_LEGACY &&
|
|
(adapter->feat_cap & IXGBE_FEATURE_LEGACY_IRQ) == 0) {
|
|
device_printf(dev, "Device does not support legacy interrupts");
|
|
error = ENXIO;
|
|
goto err;
|
|
}
|
|
|
|
/* Allocate multicast array memory. */
|
|
adapter->mta = malloc(sizeof(*adapter->mta) *
|
|
MAX_NUM_MULTICAST_ADDRESSES, M_IXGBE, M_NOWAIT);
|
|
if (adapter->mta == NULL) {
|
|
device_printf(dev, "Can not allocate multicast setup array\n");
|
|
error = ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
/* hw.ix defaults init */
|
|
ixgbe_set_advertise(adapter, ixgbe_advertise_speed);
|
|
|
|
/* Enable the optics for 82599 SFP+ fiber */
|
|
ixgbe_enable_tx_laser(hw);
|
|
|
|
/* Enable power to the phy. */
|
|
ixgbe_set_phy_power(hw, TRUE);
|
|
|
|
ixgbe_initialize_iov(adapter);
|
|
|
|
error = ixgbe_setup_interface(ctx);
|
|
if (error) {
|
|
device_printf(dev, "Interface setup failed: %d\n", error);
|
|
goto err;
|
|
}
|
|
|
|
ixgbe_if_update_admin_status(ctx);
|
|
|
|
/* Initialize statistics */
|
|
ixgbe_update_stats_counters(adapter);
|
|
ixgbe_add_hw_stats(adapter);
|
|
|
|
/* Check PCIE slot type/speed/width */
|
|
ixgbe_get_slot_info(adapter);
|
|
|
|
/*
|
|
* Do time init and sysctl init here, but
|
|
* only on the first port of a bypass adapter.
|
|
*/
|
|
ixgbe_bypass_init(adapter);
|
|
|
|
/* Set an initial dmac value */
|
|
adapter->dmac = 0;
|
|
/* Set initial advertised speeds (if applicable) */
|
|
adapter->advertise = ixgbe_get_advertise(adapter);
|
|
|
|
if (adapter->feat_cap & IXGBE_FEATURE_SRIOV)
|
|
ixgbe_define_iov_schemas(dev, &error);
|
|
|
|
/* Add sysctls */
|
|
ixgbe_add_device_sysctls(ctx);
|
|
|
|
return (0);
|
|
err:
|
|
return (error);
|
|
} /* ixgbe_if_attach_post */
|
|
|
|
/************************************************************************
|
|
* ixgbe_check_wol_support
|
|
*
|
|
* Checks whether the adapter's ports are capable of
|
|
* Wake On LAN by reading the adapter's NVM.
|
|
*
|
|
* Sets each port's hw->wol_enabled value depending
|
|
* on the value read here.
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_check_wol_support(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u16 dev_caps = 0;
|
|
|
|
/* Find out WoL support for port */
|
|
adapter->wol_support = hw->wol_enabled = 0;
|
|
ixgbe_get_device_caps(hw, &dev_caps);
|
|
if ((dev_caps & IXGBE_DEVICE_CAPS_WOL_PORT0_1) ||
|
|
((dev_caps & IXGBE_DEVICE_CAPS_WOL_PORT0) &&
|
|
hw->bus.func == 0))
|
|
adapter->wol_support = hw->wol_enabled = 1;
|
|
|
|
/* Save initial wake up filter configuration */
|
|
adapter->wufc = IXGBE_READ_REG(hw, IXGBE_WUFC);
|
|
|
|
return;
|
|
} /* ixgbe_check_wol_support */
|
|
|
|
/************************************************************************
|
|
* ixgbe_setup_interface
|
|
*
|
|
* Setup networking device structure and register an interface.
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_setup_interface(if_ctx_t ctx)
|
|
{
|
|
struct ifnet *ifp = iflib_get_ifp(ctx);
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
|
|
INIT_DEBUGOUT("ixgbe_setup_interface: begin");
|
|
|
|
if_setbaudrate(ifp, IF_Gbps(10));
|
|
|
|
adapter->max_frame_size = ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
|
|
|
|
adapter->phy_layer = ixgbe_get_supported_physical_layer(&adapter->hw);
|
|
|
|
ixgbe_add_media_types(ctx);
|
|
|
|
/* Autoselect media by default */
|
|
ifmedia_set(adapter->media, IFM_ETHER | IFM_AUTO);
|
|
|
|
return (0);
|
|
} /* ixgbe_setup_interface */
|
|
|
|
/************************************************************************
|
|
* ixgbe_if_get_counter
|
|
************************************************************************/
|
|
static uint64_t
|
|
ixgbe_if_get_counter(if_ctx_t ctx, ift_counter cnt)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
if_t ifp = iflib_get_ifp(ctx);
|
|
|
|
switch (cnt) {
|
|
case IFCOUNTER_IPACKETS:
|
|
return (adapter->ipackets);
|
|
case IFCOUNTER_OPACKETS:
|
|
return (adapter->opackets);
|
|
case IFCOUNTER_IBYTES:
|
|
return (adapter->ibytes);
|
|
case IFCOUNTER_OBYTES:
|
|
return (adapter->obytes);
|
|
case IFCOUNTER_IMCASTS:
|
|
return (adapter->imcasts);
|
|
case IFCOUNTER_OMCASTS:
|
|
return (adapter->omcasts);
|
|
case IFCOUNTER_COLLISIONS:
|
|
return (0);
|
|
case IFCOUNTER_IQDROPS:
|
|
return (adapter->iqdrops);
|
|
case IFCOUNTER_OQDROPS:
|
|
return (0);
|
|
case IFCOUNTER_IERRORS:
|
|
return (adapter->ierrors);
|
|
default:
|
|
return (if_get_counter_default(ifp, cnt));
|
|
}
|
|
} /* ixgbe_if_get_counter */
|
|
|
|
/************************************************************************
|
|
* ixgbe_if_i2c_req
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_if_i2c_req(if_ctx_t ctx, struct ifi2creq *req)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
int i;
|
|
|
|
|
|
if (hw->phy.ops.read_i2c_byte == NULL)
|
|
return (ENXIO);
|
|
for (i = 0; i < req->len; i++)
|
|
hw->phy.ops.read_i2c_byte(hw, req->offset + i,
|
|
req->dev_addr, &req->data[i]);
|
|
return (0);
|
|
} /* ixgbe_if_i2c_req */
|
|
|
|
/************************************************************************
|
|
* ixgbe_add_media_types
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_add_media_types(if_ctx_t ctx)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
device_t dev = iflib_get_dev(ctx);
|
|
u64 layer;
|
|
|
|
layer = adapter->phy_layer = ixgbe_get_supported_physical_layer(hw);
|
|
|
|
/* Media types with matching FreeBSD media defines */
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_T)
|
|
ifmedia_add(adapter->media, IFM_ETHER | IFM_10G_T, 0, NULL);
|
|
if (layer & IXGBE_PHYSICAL_LAYER_1000BASE_T)
|
|
ifmedia_add(adapter->media, IFM_ETHER | IFM_1000_T, 0, NULL);
|
|
if (layer & IXGBE_PHYSICAL_LAYER_100BASE_TX)
|
|
ifmedia_add(adapter->media, IFM_ETHER | IFM_100_TX, 0, NULL);
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10BASE_T)
|
|
ifmedia_add(adapter->media, IFM_ETHER | IFM_10_T, 0, NULL);
|
|
|
|
if (layer & IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU ||
|
|
layer & IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA)
|
|
ifmedia_add(adapter->media, IFM_ETHER | IFM_10G_TWINAX, 0,
|
|
NULL);
|
|
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_LR) {
|
|
ifmedia_add(adapter->media, IFM_ETHER | IFM_10G_LR, 0, NULL);
|
|
if (hw->phy.multispeed_fiber)
|
|
ifmedia_add(adapter->media, IFM_ETHER | IFM_1000_LX, 0,
|
|
NULL);
|
|
}
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_SR) {
|
|
ifmedia_add(adapter->media, IFM_ETHER | IFM_10G_SR, 0, NULL);
|
|
if (hw->phy.multispeed_fiber)
|
|
ifmedia_add(adapter->media, IFM_ETHER | IFM_1000_SX, 0,
|
|
NULL);
|
|
} else if (layer & IXGBE_PHYSICAL_LAYER_1000BASE_SX)
|
|
ifmedia_add(adapter->media, IFM_ETHER | IFM_1000_SX, 0, NULL);
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_CX4)
|
|
ifmedia_add(adapter->media, IFM_ETHER | IFM_10G_CX4, 0, NULL);
|
|
|
|
#ifdef IFM_ETH_XTYPE
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_KR)
|
|
ifmedia_add(adapter->media, IFM_ETHER | IFM_10G_KR, 0, NULL);
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_KX4)
|
|
ifmedia_add( adapter->media, IFM_ETHER | IFM_10G_KX4, 0, NULL);
|
|
if (layer & IXGBE_PHYSICAL_LAYER_1000BASE_KX)
|
|
ifmedia_add(adapter->media, IFM_ETHER | IFM_1000_KX, 0, NULL);
|
|
if (layer & IXGBE_PHYSICAL_LAYER_2500BASE_KX)
|
|
ifmedia_add(adapter->media, IFM_ETHER | IFM_2500_KX, 0, NULL);
|
|
#else
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_KR) {
|
|
device_printf(dev, "Media supported: 10GbaseKR\n");
|
|
device_printf(dev, "10GbaseKR mapped to 10GbaseSR\n");
|
|
ifmedia_add(adapter->media, IFM_ETHER | IFM_10G_SR, 0, NULL);
|
|
}
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_KX4) {
|
|
device_printf(dev, "Media supported: 10GbaseKX4\n");
|
|
device_printf(dev, "10GbaseKX4 mapped to 10GbaseCX4\n");
|
|
ifmedia_add(adapter->media, IFM_ETHER | IFM_10G_CX4, 0, NULL);
|
|
}
|
|
if (layer & IXGBE_PHYSICAL_LAYER_1000BASE_KX) {
|
|
device_printf(dev, "Media supported: 1000baseKX\n");
|
|
device_printf(dev, "1000baseKX mapped to 1000baseCX\n");
|
|
ifmedia_add(adapter->media, IFM_ETHER | IFM_1000_CX, 0, NULL);
|
|
}
|
|
if (layer & IXGBE_PHYSICAL_LAYER_2500BASE_KX) {
|
|
device_printf(dev, "Media supported: 2500baseKX\n");
|
|
device_printf(dev, "2500baseKX mapped to 2500baseSX\n");
|
|
ifmedia_add(adapter->media, IFM_ETHER | IFM_2500_SX, 0, NULL);
|
|
}
|
|
#endif
|
|
if (layer & IXGBE_PHYSICAL_LAYER_1000BASE_BX)
|
|
device_printf(dev, "Media supported: 1000baseBX\n");
|
|
|
|
if (hw->device_id == IXGBE_DEV_ID_82598AT) {
|
|
ifmedia_add(adapter->media, IFM_ETHER | IFM_1000_T | IFM_FDX,
|
|
0, NULL);
|
|
ifmedia_add(adapter->media, IFM_ETHER | IFM_1000_T, 0, NULL);
|
|
}
|
|
|
|
ifmedia_add(adapter->media, IFM_ETHER | IFM_AUTO, 0, NULL);
|
|
} /* ixgbe_add_media_types */
|
|
|
|
/************************************************************************
|
|
* ixgbe_is_sfp
|
|
************************************************************************/
|
|
static inline bool
|
|
ixgbe_is_sfp(struct ixgbe_hw *hw)
|
|
{
|
|
switch (hw->mac.type) {
|
|
case ixgbe_mac_82598EB:
|
|
if (hw->phy.type == ixgbe_phy_nl)
|
|
return (TRUE);
|
|
return (FALSE);
|
|
case ixgbe_mac_82599EB:
|
|
switch (hw->mac.ops.get_media_type(hw)) {
|
|
case ixgbe_media_type_fiber:
|
|
case ixgbe_media_type_fiber_qsfp:
|
|
return (TRUE);
|
|
default:
|
|
return (FALSE);
|
|
}
|
|
case ixgbe_mac_X550EM_x:
|
|
case ixgbe_mac_X550EM_a:
|
|
if (hw->mac.ops.get_media_type(hw) == ixgbe_media_type_fiber)
|
|
return (TRUE);
|
|
return (FALSE);
|
|
default:
|
|
return (FALSE);
|
|
}
|
|
} /* ixgbe_is_sfp */
|
|
|
|
/************************************************************************
|
|
* ixgbe_config_link
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_config_link(if_ctx_t ctx)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 autoneg, err = 0;
|
|
bool sfp, negotiate;
|
|
|
|
sfp = ixgbe_is_sfp(hw);
|
|
|
|
if (sfp) {
|
|
adapter->task_requests |= IXGBE_REQUEST_TASK_MOD;
|
|
iflib_admin_intr_deferred(ctx);
|
|
} else {
|
|
if (hw->mac.ops.check_link)
|
|
err = ixgbe_check_link(hw, &adapter->link_speed,
|
|
&adapter->link_up, FALSE);
|
|
if (err)
|
|
return;
|
|
autoneg = hw->phy.autoneg_advertised;
|
|
if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
|
|
err = hw->mac.ops.get_link_capabilities(hw, &autoneg,
|
|
&negotiate);
|
|
if (err)
|
|
return;
|
|
if (hw->mac.ops.setup_link)
|
|
err = hw->mac.ops.setup_link(hw, autoneg,
|
|
adapter->link_up);
|
|
}
|
|
} /* ixgbe_config_link */
|
|
|
|
/************************************************************************
|
|
* ixgbe_update_stats_counters - Update board statistics counters.
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_update_stats_counters(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct ixgbe_hw_stats *stats = &adapter->stats.pf;
|
|
u32 missed_rx = 0, bprc, lxon, lxoff, total;
|
|
u32 lxoffrxc;
|
|
u64 total_missed_rx = 0;
|
|
|
|
stats->crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS);
|
|
stats->illerrc += IXGBE_READ_REG(hw, IXGBE_ILLERRC);
|
|
stats->errbc += IXGBE_READ_REG(hw, IXGBE_ERRBC);
|
|
stats->mspdc += IXGBE_READ_REG(hw, IXGBE_MSPDC);
|
|
stats->mpc[0] += IXGBE_READ_REG(hw, IXGBE_MPC(0));
|
|
|
|
for (int i = 0; i < 16; i++) {
|
|
stats->qprc[i] += IXGBE_READ_REG(hw, IXGBE_QPRC(i));
|
|
stats->qptc[i] += IXGBE_READ_REG(hw, IXGBE_QPTC(i));
|
|
stats->qprdc[i] += IXGBE_READ_REG(hw, IXGBE_QPRDC(i));
|
|
}
|
|
stats->mlfc += IXGBE_READ_REG(hw, IXGBE_MLFC);
|
|
stats->mrfc += IXGBE_READ_REG(hw, IXGBE_MRFC);
|
|
stats->rlec += IXGBE_READ_REG(hw, IXGBE_RLEC);
|
|
|
|
/* Hardware workaround, gprc counts missed packets */
|
|
stats->gprc += IXGBE_READ_REG(hw, IXGBE_GPRC);
|
|
stats->gprc -= missed_rx;
|
|
|
|
if (hw->mac.type != ixgbe_mac_82598EB) {
|
|
stats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCL) +
|
|
((u64)IXGBE_READ_REG(hw, IXGBE_GORCH) << 32);
|
|
stats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL) +
|
|
((u64)IXGBE_READ_REG(hw, IXGBE_GOTCH) << 32);
|
|
stats->tor += IXGBE_READ_REG(hw, IXGBE_TORL) +
|
|
((u64)IXGBE_READ_REG(hw, IXGBE_TORH) << 32);
|
|
stats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT);
|
|
lxoffrxc = IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT);
|
|
stats->lxoffrxc += lxoffrxc;
|
|
} else {
|
|
stats->lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC);
|
|
lxoffrxc = IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
|
|
stats->lxoffrxc += lxoffrxc;
|
|
/* 82598 only has a counter in the high register */
|
|
stats->gorc += IXGBE_READ_REG(hw, IXGBE_GORCH);
|
|
stats->gotc += IXGBE_READ_REG(hw, IXGBE_GOTCH);
|
|
stats->tor += IXGBE_READ_REG(hw, IXGBE_TORH);
|
|
}
|
|
|
|
/*
|
|
* For watchdog management we need to know if we have been paused
|
|
* during the last interval, so capture that here.
|
|
*/
|
|
if (lxoffrxc)
|
|
adapter->shared->isc_pause_frames = 1;
|
|
|
|
/*
|
|
* Workaround: mprc hardware is incorrectly counting
|
|
* broadcasts, so for now we subtract those.
|
|
*/
|
|
bprc = IXGBE_READ_REG(hw, IXGBE_BPRC);
|
|
stats->bprc += bprc;
|
|
stats->mprc += IXGBE_READ_REG(hw, IXGBE_MPRC);
|
|
if (hw->mac.type == ixgbe_mac_82598EB)
|
|
stats->mprc -= bprc;
|
|
|
|
stats->prc64 += IXGBE_READ_REG(hw, IXGBE_PRC64);
|
|
stats->prc127 += IXGBE_READ_REG(hw, IXGBE_PRC127);
|
|
stats->prc255 += IXGBE_READ_REG(hw, IXGBE_PRC255);
|
|
stats->prc511 += IXGBE_READ_REG(hw, IXGBE_PRC511);
|
|
stats->prc1023 += IXGBE_READ_REG(hw, IXGBE_PRC1023);
|
|
stats->prc1522 += IXGBE_READ_REG(hw, IXGBE_PRC1522);
|
|
|
|
lxon = IXGBE_READ_REG(hw, IXGBE_LXONTXC);
|
|
stats->lxontxc += lxon;
|
|
lxoff = IXGBE_READ_REG(hw, IXGBE_LXOFFTXC);
|
|
stats->lxofftxc += lxoff;
|
|
total = lxon + lxoff;
|
|
|
|
stats->gptc += IXGBE_READ_REG(hw, IXGBE_GPTC);
|
|
stats->mptc += IXGBE_READ_REG(hw, IXGBE_MPTC);
|
|
stats->ptc64 += IXGBE_READ_REG(hw, IXGBE_PTC64);
|
|
stats->gptc -= total;
|
|
stats->mptc -= total;
|
|
stats->ptc64 -= total;
|
|
stats->gotc -= total * ETHER_MIN_LEN;
|
|
|
|
stats->ruc += IXGBE_READ_REG(hw, IXGBE_RUC);
|
|
stats->rfc += IXGBE_READ_REG(hw, IXGBE_RFC);
|
|
stats->roc += IXGBE_READ_REG(hw, IXGBE_ROC);
|
|
stats->rjc += IXGBE_READ_REG(hw, IXGBE_RJC);
|
|
stats->mngprc += IXGBE_READ_REG(hw, IXGBE_MNGPRC);
|
|
stats->mngpdc += IXGBE_READ_REG(hw, IXGBE_MNGPDC);
|
|
stats->mngptc += IXGBE_READ_REG(hw, IXGBE_MNGPTC);
|
|
stats->tpr += IXGBE_READ_REG(hw, IXGBE_TPR);
|
|
stats->tpt += IXGBE_READ_REG(hw, IXGBE_TPT);
|
|
stats->ptc127 += IXGBE_READ_REG(hw, IXGBE_PTC127);
|
|
stats->ptc255 += IXGBE_READ_REG(hw, IXGBE_PTC255);
|
|
stats->ptc511 += IXGBE_READ_REG(hw, IXGBE_PTC511);
|
|
stats->ptc1023 += IXGBE_READ_REG(hw, IXGBE_PTC1023);
|
|
stats->ptc1522 += IXGBE_READ_REG(hw, IXGBE_PTC1522);
|
|
stats->bptc += IXGBE_READ_REG(hw, IXGBE_BPTC);
|
|
stats->xec += IXGBE_READ_REG(hw, IXGBE_XEC);
|
|
stats->fccrc += IXGBE_READ_REG(hw, IXGBE_FCCRC);
|
|
stats->fclast += IXGBE_READ_REG(hw, IXGBE_FCLAST);
|
|
/* Only read FCOE on 82599 */
|
|
if (hw->mac.type != ixgbe_mac_82598EB) {
|
|
stats->fcoerpdc += IXGBE_READ_REG(hw, IXGBE_FCOERPDC);
|
|
stats->fcoeprc += IXGBE_READ_REG(hw, IXGBE_FCOEPRC);
|
|
stats->fcoeptc += IXGBE_READ_REG(hw, IXGBE_FCOEPTC);
|
|
stats->fcoedwrc += IXGBE_READ_REG(hw, IXGBE_FCOEDWRC);
|
|
stats->fcoedwtc += IXGBE_READ_REG(hw, IXGBE_FCOEDWTC);
|
|
}
|
|
|
|
/* Fill out the OS statistics structure */
|
|
IXGBE_SET_IPACKETS(adapter, stats->gprc);
|
|
IXGBE_SET_OPACKETS(adapter, stats->gptc);
|
|
IXGBE_SET_IBYTES(adapter, stats->gorc);
|
|
IXGBE_SET_OBYTES(adapter, stats->gotc);
|
|
IXGBE_SET_IMCASTS(adapter, stats->mprc);
|
|
IXGBE_SET_OMCASTS(adapter, stats->mptc);
|
|
IXGBE_SET_COLLISIONS(adapter, 0);
|
|
IXGBE_SET_IQDROPS(adapter, total_missed_rx);
|
|
IXGBE_SET_IERRORS(adapter, stats->crcerrs + stats->rlec);
|
|
} /* ixgbe_update_stats_counters */
|
|
|
|
/************************************************************************
|
|
* ixgbe_add_hw_stats
|
|
*
|
|
* Add sysctl variables, one per statistic, to the system.
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_add_hw_stats(struct adapter *adapter)
|
|
{
|
|
device_t dev = iflib_get_dev(adapter->ctx);
|
|
struct ix_rx_queue *rx_que;
|
|
struct ix_tx_queue *tx_que;
|
|
struct sysctl_ctx_list *ctx = device_get_sysctl_ctx(dev);
|
|
struct sysctl_oid *tree = device_get_sysctl_tree(dev);
|
|
struct sysctl_oid_list *child = SYSCTL_CHILDREN(tree);
|
|
struct ixgbe_hw_stats *stats = &adapter->stats.pf;
|
|
struct sysctl_oid *stat_node, *queue_node;
|
|
struct sysctl_oid_list *stat_list, *queue_list;
|
|
int i;
|
|
|
|
#define QUEUE_NAME_LEN 32
|
|
char namebuf[QUEUE_NAME_LEN];
|
|
|
|
/* Driver Statistics */
|
|
SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "dropped",
|
|
CTLFLAG_RD, &adapter->dropped_pkts, "Driver dropped packets");
|
|
SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "watchdog_events",
|
|
CTLFLAG_RD, &adapter->watchdog_events, "Watchdog timeouts");
|
|
SYSCTL_ADD_ULONG(ctx, child, OID_AUTO, "link_irq",
|
|
CTLFLAG_RD, &adapter->link_irq, "Link MSI-X IRQ Handled");
|
|
|
|
for (i = 0, tx_que = adapter->tx_queues; i < adapter->num_tx_queues; i++, tx_que++) {
|
|
struct tx_ring *txr = &tx_que->txr;
|
|
snprintf(namebuf, QUEUE_NAME_LEN, "queue%d", i);
|
|
queue_node = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, namebuf,
|
|
CTLFLAG_RD, NULL, "Queue Name");
|
|
queue_list = SYSCTL_CHILDREN(queue_node);
|
|
|
|
SYSCTL_ADD_PROC(ctx, queue_list, OID_AUTO, "txd_head",
|
|
CTLTYPE_UINT | CTLFLAG_RD, txr, sizeof(txr),
|
|
ixgbe_sysctl_tdh_handler, "IU", "Transmit Descriptor Head");
|
|
SYSCTL_ADD_PROC(ctx, queue_list, OID_AUTO, "txd_tail",
|
|
CTLTYPE_UINT | CTLFLAG_RD, txr, sizeof(txr),
|
|
ixgbe_sysctl_tdt_handler, "IU", "Transmit Descriptor Tail");
|
|
SYSCTL_ADD_UQUAD(ctx, queue_list, OID_AUTO, "tso_tx",
|
|
CTLFLAG_RD, &txr->tso_tx, "TSO");
|
|
SYSCTL_ADD_UQUAD(ctx, queue_list, OID_AUTO, "tx_packets",
|
|
CTLFLAG_RD, &txr->total_packets,
|
|
"Queue Packets Transmitted");
|
|
}
|
|
|
|
for (i = 0, rx_que = adapter->rx_queues; i < adapter->num_rx_queues; i++, rx_que++) {
|
|
struct rx_ring *rxr = &rx_que->rxr;
|
|
snprintf(namebuf, QUEUE_NAME_LEN, "queue%d", i);
|
|
queue_node = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, namebuf,
|
|
CTLFLAG_RD, NULL, "Queue Name");
|
|
queue_list = SYSCTL_CHILDREN(queue_node);
|
|
|
|
SYSCTL_ADD_PROC(ctx, queue_list, OID_AUTO, "interrupt_rate",
|
|
CTLTYPE_UINT | CTLFLAG_RW, &adapter->rx_queues[i],
|
|
sizeof(&adapter->rx_queues[i]),
|
|
ixgbe_sysctl_interrupt_rate_handler, "IU",
|
|
"Interrupt Rate");
|
|
SYSCTL_ADD_UQUAD(ctx, queue_list, OID_AUTO, "irqs",
|
|
CTLFLAG_RD, &(adapter->rx_queues[i].irqs),
|
|
"irqs on this queue");
|
|
SYSCTL_ADD_PROC(ctx, queue_list, OID_AUTO, "rxd_head",
|
|
CTLTYPE_UINT | CTLFLAG_RD, rxr, sizeof(rxr),
|
|
ixgbe_sysctl_rdh_handler, "IU", "Receive Descriptor Head");
|
|
SYSCTL_ADD_PROC(ctx, queue_list, OID_AUTO, "rxd_tail",
|
|
CTLTYPE_UINT | CTLFLAG_RD, rxr, sizeof(rxr),
|
|
ixgbe_sysctl_rdt_handler, "IU", "Receive Descriptor Tail");
|
|
SYSCTL_ADD_UQUAD(ctx, queue_list, OID_AUTO, "rx_packets",
|
|
CTLFLAG_RD, &rxr->rx_packets, "Queue Packets Received");
|
|
SYSCTL_ADD_UQUAD(ctx, queue_list, OID_AUTO, "rx_bytes",
|
|
CTLFLAG_RD, &rxr->rx_bytes, "Queue Bytes Received");
|
|
SYSCTL_ADD_UQUAD(ctx, queue_list, OID_AUTO, "rx_copies",
|
|
CTLFLAG_RD, &rxr->rx_copies, "Copied RX Frames");
|
|
SYSCTL_ADD_UQUAD(ctx, queue_list, OID_AUTO, "rx_discarded",
|
|
CTLFLAG_RD, &rxr->rx_discarded, "Discarded RX packets");
|
|
}
|
|
|
|
/* MAC stats get their own sub node */
|
|
|
|
stat_node = SYSCTL_ADD_NODE(ctx, child, OID_AUTO, "mac_stats",
|
|
CTLFLAG_RD, NULL, "MAC Statistics");
|
|
stat_list = SYSCTL_CHILDREN(stat_node);
|
|
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "crc_errs",
|
|
CTLFLAG_RD, &stats->crcerrs, "CRC Errors");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "ill_errs",
|
|
CTLFLAG_RD, &stats->illerrc, "Illegal Byte Errors");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "byte_errs",
|
|
CTLFLAG_RD, &stats->errbc, "Byte Errors");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "short_discards",
|
|
CTLFLAG_RD, &stats->mspdc, "MAC Short Packets Discarded");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "local_faults",
|
|
CTLFLAG_RD, &stats->mlfc, "MAC Local Faults");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "remote_faults",
|
|
CTLFLAG_RD, &stats->mrfc, "MAC Remote Faults");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "rec_len_errs",
|
|
CTLFLAG_RD, &stats->rlec, "Receive Length Errors");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "rx_missed_packets",
|
|
CTLFLAG_RD, &stats->mpc[0], "RX Missed Packet Count");
|
|
|
|
/* Flow Control stats */
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "xon_txd",
|
|
CTLFLAG_RD, &stats->lxontxc, "Link XON Transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "xon_recvd",
|
|
CTLFLAG_RD, &stats->lxonrxc, "Link XON Received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "xoff_txd",
|
|
CTLFLAG_RD, &stats->lxofftxc, "Link XOFF Transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "xoff_recvd",
|
|
CTLFLAG_RD, &stats->lxoffrxc, "Link XOFF Received");
|
|
|
|
/* Packet Reception Stats */
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "total_octets_rcvd",
|
|
CTLFLAG_RD, &stats->tor, "Total Octets Received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "good_octets_rcvd",
|
|
CTLFLAG_RD, &stats->gorc, "Good Octets Received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "total_pkts_rcvd",
|
|
CTLFLAG_RD, &stats->tpr, "Total Packets Received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "good_pkts_rcvd",
|
|
CTLFLAG_RD, &stats->gprc, "Good Packets Received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "mcast_pkts_rcvd",
|
|
CTLFLAG_RD, &stats->mprc, "Multicast Packets Received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "bcast_pkts_rcvd",
|
|
CTLFLAG_RD, &stats->bprc, "Broadcast Packets Received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "rx_frames_64",
|
|
CTLFLAG_RD, &stats->prc64, "64 byte frames received ");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "rx_frames_65_127",
|
|
CTLFLAG_RD, &stats->prc127, "65-127 byte frames received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "rx_frames_128_255",
|
|
CTLFLAG_RD, &stats->prc255, "128-255 byte frames received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "rx_frames_256_511",
|
|
CTLFLAG_RD, &stats->prc511, "256-511 byte frames received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "rx_frames_512_1023",
|
|
CTLFLAG_RD, &stats->prc1023, "512-1023 byte frames received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "rx_frames_1024_1522",
|
|
CTLFLAG_RD, &stats->prc1522, "1023-1522 byte frames received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "recv_undersized",
|
|
CTLFLAG_RD, &stats->ruc, "Receive Undersized");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "recv_fragmented",
|
|
CTLFLAG_RD, &stats->rfc, "Fragmented Packets Received ");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "recv_oversized",
|
|
CTLFLAG_RD, &stats->roc, "Oversized Packets Received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "recv_jabberd",
|
|
CTLFLAG_RD, &stats->rjc, "Received Jabber");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "management_pkts_rcvd",
|
|
CTLFLAG_RD, &stats->mngprc, "Management Packets Received");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "management_pkts_drpd",
|
|
CTLFLAG_RD, &stats->mngptc, "Management Packets Dropped");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "checksum_errs",
|
|
CTLFLAG_RD, &stats->xec, "Checksum Errors");
|
|
|
|
/* Packet Transmission Stats */
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "good_octets_txd",
|
|
CTLFLAG_RD, &stats->gotc, "Good Octets Transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "total_pkts_txd",
|
|
CTLFLAG_RD, &stats->tpt, "Total Packets Transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "good_pkts_txd",
|
|
CTLFLAG_RD, &stats->gptc, "Good Packets Transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "bcast_pkts_txd",
|
|
CTLFLAG_RD, &stats->bptc, "Broadcast Packets Transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "mcast_pkts_txd",
|
|
CTLFLAG_RD, &stats->mptc, "Multicast Packets Transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "management_pkts_txd",
|
|
CTLFLAG_RD, &stats->mngptc, "Management Packets Transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "tx_frames_64",
|
|
CTLFLAG_RD, &stats->ptc64, "64 byte frames transmitted ");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "tx_frames_65_127",
|
|
CTLFLAG_RD, &stats->ptc127, "65-127 byte frames transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "tx_frames_128_255",
|
|
CTLFLAG_RD, &stats->ptc255, "128-255 byte frames transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "tx_frames_256_511",
|
|
CTLFLAG_RD, &stats->ptc511, "256-511 byte frames transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "tx_frames_512_1023",
|
|
CTLFLAG_RD, &stats->ptc1023, "512-1023 byte frames transmitted");
|
|
SYSCTL_ADD_UQUAD(ctx, stat_list, OID_AUTO, "tx_frames_1024_1522",
|
|
CTLFLAG_RD, &stats->ptc1522, "1024-1522 byte frames transmitted");
|
|
} /* ixgbe_add_hw_stats */
|
|
|
|
/************************************************************************
|
|
* ixgbe_sysctl_tdh_handler - Transmit Descriptor Head handler function
|
|
*
|
|
* Retrieves the TDH value from the hardware
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_sysctl_tdh_handler(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct tx_ring *txr = ((struct tx_ring *)oidp->oid_arg1);
|
|
int error;
|
|
unsigned int val;
|
|
|
|
if (!txr)
|
|
return (0);
|
|
|
|
val = IXGBE_READ_REG(&txr->adapter->hw, IXGBE_TDH(txr->me));
|
|
error = sysctl_handle_int(oidp, &val, 0, req);
|
|
if (error || !req->newptr)
|
|
return error;
|
|
|
|
return (0);
|
|
} /* ixgbe_sysctl_tdh_handler */
|
|
|
|
/************************************************************************
|
|
* ixgbe_sysctl_tdt_handler - Transmit Descriptor Tail handler function
|
|
*
|
|
* Retrieves the TDT value from the hardware
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_sysctl_tdt_handler(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct tx_ring *txr = ((struct tx_ring *)oidp->oid_arg1);
|
|
int error;
|
|
unsigned int val;
|
|
|
|
if (!txr)
|
|
return (0);
|
|
|
|
val = IXGBE_READ_REG(&txr->adapter->hw, IXGBE_TDT(txr->me));
|
|
error = sysctl_handle_int(oidp, &val, 0, req);
|
|
if (error || !req->newptr)
|
|
return error;
|
|
|
|
return (0);
|
|
} /* ixgbe_sysctl_tdt_handler */
|
|
|
|
/************************************************************************
|
|
* ixgbe_sysctl_rdh_handler - Receive Descriptor Head handler function
|
|
*
|
|
* Retrieves the RDH value from the hardware
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_sysctl_rdh_handler(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct rx_ring *rxr = ((struct rx_ring *)oidp->oid_arg1);
|
|
int error;
|
|
unsigned int val;
|
|
|
|
if (!rxr)
|
|
return (0);
|
|
|
|
val = IXGBE_READ_REG(&rxr->adapter->hw, IXGBE_RDH(rxr->me));
|
|
error = sysctl_handle_int(oidp, &val, 0, req);
|
|
if (error || !req->newptr)
|
|
return error;
|
|
|
|
return (0);
|
|
} /* ixgbe_sysctl_rdh_handler */
|
|
|
|
/************************************************************************
|
|
* ixgbe_sysctl_rdt_handler - Receive Descriptor Tail handler function
|
|
*
|
|
* Retrieves the RDT value from the hardware
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_sysctl_rdt_handler(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct rx_ring *rxr = ((struct rx_ring *)oidp->oid_arg1);
|
|
int error;
|
|
unsigned int val;
|
|
|
|
if (!rxr)
|
|
return (0);
|
|
|
|
val = IXGBE_READ_REG(&rxr->adapter->hw, IXGBE_RDT(rxr->me));
|
|
error = sysctl_handle_int(oidp, &val, 0, req);
|
|
if (error || !req->newptr)
|
|
return error;
|
|
|
|
return (0);
|
|
} /* ixgbe_sysctl_rdt_handler */
|
|
|
|
/************************************************************************
|
|
* ixgbe_if_vlan_register
|
|
*
|
|
* Run via vlan config EVENT, it enables us to use the
|
|
* HW Filter table since we can get the vlan id. This
|
|
* just creates the entry in the soft version of the
|
|
* VFTA, init will repopulate the real table.
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_if_vlan_register(if_ctx_t ctx, u16 vtag)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
u16 index, bit;
|
|
|
|
index = (vtag >> 5) & 0x7F;
|
|
bit = vtag & 0x1F;
|
|
adapter->shadow_vfta[index] |= (1 << bit);
|
|
++adapter->num_vlans;
|
|
ixgbe_setup_vlan_hw_support(ctx);
|
|
} /* ixgbe_if_vlan_register */
|
|
|
|
/************************************************************************
|
|
* ixgbe_if_vlan_unregister
|
|
*
|
|
* Run via vlan unconfig EVENT, remove our entry in the soft vfta.
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_if_vlan_unregister(if_ctx_t ctx, u16 vtag)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
u16 index, bit;
|
|
|
|
index = (vtag >> 5) & 0x7F;
|
|
bit = vtag & 0x1F;
|
|
adapter->shadow_vfta[index] &= ~(1 << bit);
|
|
--adapter->num_vlans;
|
|
/* Re-init to load the changes */
|
|
ixgbe_setup_vlan_hw_support(ctx);
|
|
} /* ixgbe_if_vlan_unregister */
|
|
|
|
/************************************************************************
|
|
* ixgbe_setup_vlan_hw_support
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_setup_vlan_hw_support(if_ctx_t ctx)
|
|
{
|
|
struct ifnet *ifp = iflib_get_ifp(ctx);
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct rx_ring *rxr;
|
|
int i;
|
|
u32 ctrl;
|
|
|
|
|
|
/*
|
|
* We get here thru init_locked, meaning
|
|
* a soft reset, this has already cleared
|
|
* the VFTA and other state, so if there
|
|
* have been no vlan's registered do nothing.
|
|
*/
|
|
if (adapter->num_vlans == 0)
|
|
return;
|
|
|
|
/* Setup the queues for vlans */
|
|
if (ifp->if_capenable & IFCAP_VLAN_HWTAGGING) {
|
|
for (i = 0; i < adapter->num_rx_queues; i++) {
|
|
rxr = &adapter->rx_queues[i].rxr;
|
|
/* On 82599 the VLAN enable is per/queue in RXDCTL */
|
|
if (hw->mac.type != ixgbe_mac_82598EB) {
|
|
ctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(rxr->me));
|
|
ctrl |= IXGBE_RXDCTL_VME;
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(rxr->me), ctrl);
|
|
}
|
|
rxr->vtag_strip = TRUE;
|
|
}
|
|
}
|
|
|
|
if ((ifp->if_capenable & IFCAP_VLAN_HWFILTER) == 0)
|
|
return;
|
|
/*
|
|
* A soft reset zero's out the VFTA, so
|
|
* we need to repopulate it now.
|
|
*/
|
|
for (i = 0; i < IXGBE_VFTA_SIZE; i++)
|
|
if (adapter->shadow_vfta[i] != 0)
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFTA(i),
|
|
adapter->shadow_vfta[i]);
|
|
|
|
ctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
|
|
/* Enable the Filter Table if enabled */
|
|
if (ifp->if_capenable & IFCAP_VLAN_HWFILTER) {
|
|
ctrl &= ~IXGBE_VLNCTRL_CFIEN;
|
|
ctrl |= IXGBE_VLNCTRL_VFE;
|
|
}
|
|
if (hw->mac.type == ixgbe_mac_82598EB)
|
|
ctrl |= IXGBE_VLNCTRL_VME;
|
|
IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, ctrl);
|
|
} /* ixgbe_setup_vlan_hw_support */
|
|
|
|
/************************************************************************
|
|
* ixgbe_get_slot_info
|
|
*
|
|
* Get the width and transaction speed of
|
|
* the slot this adapter is plugged into.
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_get_slot_info(struct adapter *adapter)
|
|
{
|
|
device_t dev = iflib_get_dev(adapter->ctx);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
int bus_info_valid = TRUE;
|
|
u32 offset;
|
|
u16 link;
|
|
|
|
/* Some devices are behind an internal bridge */
|
|
switch (hw->device_id) {
|
|
case IXGBE_DEV_ID_82599_SFP_SF_QP:
|
|
case IXGBE_DEV_ID_82599_QSFP_SF_QP:
|
|
goto get_parent_info;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
ixgbe_get_bus_info(hw);
|
|
|
|
/*
|
|
* Some devices don't use PCI-E, but there is no need
|
|
* to display "Unknown" for bus speed and width.
|
|
*/
|
|
switch (hw->mac.type) {
|
|
case ixgbe_mac_X550EM_x:
|
|
case ixgbe_mac_X550EM_a:
|
|
return;
|
|
default:
|
|
goto display;
|
|
}
|
|
|
|
get_parent_info:
|
|
/*
|
|
* For the Quad port adapter we need to parse back
|
|
* up the PCI tree to find the speed of the expansion
|
|
* slot into which this adapter is plugged. A bit more work.
|
|
*/
|
|
dev = device_get_parent(device_get_parent(dev));
|
|
#ifdef IXGBE_DEBUG
|
|
device_printf(dev, "parent pcib = %x,%x,%x\n", pci_get_bus(dev),
|
|
pci_get_slot(dev), pci_get_function(dev));
|
|
#endif
|
|
dev = device_get_parent(device_get_parent(dev));
|
|
#ifdef IXGBE_DEBUG
|
|
device_printf(dev, "slot pcib = %x,%x,%x\n", pci_get_bus(dev),
|
|
pci_get_slot(dev), pci_get_function(dev));
|
|
#endif
|
|
/* Now get the PCI Express Capabilities offset */
|
|
if (pci_find_cap(dev, PCIY_EXPRESS, &offset)) {
|
|
/*
|
|
* Hmm...can't get PCI-Express capabilities.
|
|
* Falling back to default method.
|
|
*/
|
|
bus_info_valid = FALSE;
|
|
ixgbe_get_bus_info(hw);
|
|
goto display;
|
|
}
|
|
/* ...and read the Link Status Register */
|
|
link = pci_read_config(dev, offset + PCIER_LINK_STA, 2);
|
|
ixgbe_set_pci_config_data_generic(hw, link);
|
|
|
|
display:
|
|
device_printf(dev, "PCI Express Bus: Speed %s %s\n",
|
|
((hw->bus.speed == ixgbe_bus_speed_8000) ? "8.0GT/s" :
|
|
(hw->bus.speed == ixgbe_bus_speed_5000) ? "5.0GT/s" :
|
|
(hw->bus.speed == ixgbe_bus_speed_2500) ? "2.5GT/s" :
|
|
"Unknown"),
|
|
((hw->bus.width == ixgbe_bus_width_pcie_x8) ? "Width x8" :
|
|
(hw->bus.width == ixgbe_bus_width_pcie_x4) ? "Width x4" :
|
|
(hw->bus.width == ixgbe_bus_width_pcie_x1) ? "Width x1" :
|
|
"Unknown"));
|
|
|
|
if (bus_info_valid) {
|
|
if ((hw->device_id != IXGBE_DEV_ID_82599_SFP_SF_QP) &&
|
|
((hw->bus.width <= ixgbe_bus_width_pcie_x4) &&
|
|
(hw->bus.speed == ixgbe_bus_speed_2500))) {
|
|
device_printf(dev, "PCI-Express bandwidth available for this card\n is not sufficient for optimal performance.\n");
|
|
device_printf(dev, "For optimal performance a x8 PCIE, or x4 PCIE Gen2 slot is required.\n");
|
|
}
|
|
if ((hw->device_id == IXGBE_DEV_ID_82599_SFP_SF_QP) &&
|
|
((hw->bus.width <= ixgbe_bus_width_pcie_x8) &&
|
|
(hw->bus.speed < ixgbe_bus_speed_8000))) {
|
|
device_printf(dev, "PCI-Express bandwidth available for this card\n is not sufficient for optimal performance.\n");
|
|
device_printf(dev, "For optimal performance a x8 PCIE Gen3 slot is required.\n");
|
|
}
|
|
} else
|
|
device_printf(dev, "Unable to determine slot speed/width. The speed/width reported are that of the internal switch.\n");
|
|
|
|
return;
|
|
} /* ixgbe_get_slot_info */
|
|
|
|
/************************************************************************
|
|
* ixgbe_if_msix_intr_assign
|
|
*
|
|
* Setup MSI-X Interrupt resources and handlers
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_if_msix_intr_assign(if_ctx_t ctx, int msix)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
struct ix_rx_queue *rx_que = adapter->rx_queues;
|
|
struct ix_tx_queue *tx_que;
|
|
int error, rid, vector = 0;
|
|
int cpu_id = 0;
|
|
char buf[16];
|
|
|
|
/* Admin Que is vector 0*/
|
|
rid = vector + 1;
|
|
for (int i = 0; i < adapter->num_rx_queues; i++, vector++, rx_que++) {
|
|
rid = vector + 1;
|
|
|
|
snprintf(buf, sizeof(buf), "rxq%d", i);
|
|
error = iflib_irq_alloc_generic(ctx, &rx_que->que_irq, rid,
|
|
IFLIB_INTR_RX, ixgbe_msix_que, rx_que, rx_que->rxr.me, buf);
|
|
|
|
if (error) {
|
|
device_printf(iflib_get_dev(ctx),
|
|
"Failed to allocate que int %d err: %d", i, error);
|
|
adapter->num_rx_queues = i + 1;
|
|
goto fail;
|
|
}
|
|
|
|
rx_que->msix = vector;
|
|
if (adapter->feat_en & IXGBE_FEATURE_RSS) {
|
|
/*
|
|
* The queue ID is used as the RSS layer bucket ID.
|
|
* We look up the queue ID -> RSS CPU ID and select
|
|
* that.
|
|
*/
|
|
cpu_id = rss_getcpu(i % rss_getnumbuckets());
|
|
} else {
|
|
/*
|
|
* Bind the MSI-X vector, and thus the
|
|
* rings to the corresponding cpu.
|
|
*
|
|
* This just happens to match the default RSS
|
|
* round-robin bucket -> queue -> CPU allocation.
|
|
*/
|
|
if (adapter->num_rx_queues > 1)
|
|
cpu_id = i;
|
|
}
|
|
|
|
}
|
|
for (int i = 0; i < adapter->num_tx_queues; i++) {
|
|
snprintf(buf, sizeof(buf), "txq%d", i);
|
|
tx_que = &adapter->tx_queues[i];
|
|
tx_que->msix = i % adapter->num_rx_queues;
|
|
iflib_softirq_alloc_generic(ctx,
|
|
&adapter->rx_queues[tx_que->msix].que_irq,
|
|
IFLIB_INTR_TX, tx_que, tx_que->txr.me, buf);
|
|
}
|
|
rid = vector + 1;
|
|
error = iflib_irq_alloc_generic(ctx, &adapter->irq, rid,
|
|
IFLIB_INTR_ADMIN, ixgbe_msix_link, adapter, 0, "aq");
|
|
if (error) {
|
|
device_printf(iflib_get_dev(ctx),
|
|
"Failed to register admin handler");
|
|
return (error);
|
|
}
|
|
|
|
adapter->vector = vector;
|
|
|
|
return (0);
|
|
fail:
|
|
iflib_irq_free(ctx, &adapter->irq);
|
|
rx_que = adapter->rx_queues;
|
|
for (int i = 0; i < adapter->num_rx_queues; i++, rx_que++)
|
|
iflib_irq_free(ctx, &rx_que->que_irq);
|
|
|
|
return (error);
|
|
} /* ixgbe_if_msix_intr_assign */
|
|
|
|
/*********************************************************************
|
|
* ixgbe_msix_que - MSI-X Queue Interrupt Service routine
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_msix_que(void *arg)
|
|
{
|
|
struct ix_rx_queue *que = arg;
|
|
struct adapter *adapter = que->adapter;
|
|
struct ifnet *ifp = iflib_get_ifp(que->adapter->ctx);
|
|
|
|
/* Protect against spurious interrupts */
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
|
|
return (FILTER_HANDLED);
|
|
|
|
ixgbe_disable_queue(adapter, que->msix);
|
|
++que->irqs;
|
|
|
|
return (FILTER_SCHEDULE_THREAD);
|
|
} /* ixgbe_msix_que */
|
|
|
|
/************************************************************************
|
|
* ixgbe_media_status - Media Ioctl callback
|
|
*
|
|
* Called whenever the user queries the status of
|
|
* the interface using ifconfig.
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_if_media_status(if_ctx_t ctx, struct ifmediareq * ifmr)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
int layer;
|
|
|
|
INIT_DEBUGOUT("ixgbe_if_media_status: begin");
|
|
|
|
ifmr->ifm_status = IFM_AVALID;
|
|
ifmr->ifm_active = IFM_ETHER;
|
|
|
|
if (!adapter->link_active)
|
|
return;
|
|
|
|
ifmr->ifm_status |= IFM_ACTIVE;
|
|
layer = adapter->phy_layer;
|
|
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_T ||
|
|
layer & IXGBE_PHYSICAL_LAYER_1000BASE_T ||
|
|
layer & IXGBE_PHYSICAL_LAYER_100BASE_TX ||
|
|
layer & IXGBE_PHYSICAL_LAYER_10BASE_T)
|
|
switch (adapter->link_speed) {
|
|
case IXGBE_LINK_SPEED_10GB_FULL:
|
|
ifmr->ifm_active |= IFM_10G_T | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_1GB_FULL:
|
|
ifmr->ifm_active |= IFM_1000_T | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_100_FULL:
|
|
ifmr->ifm_active |= IFM_100_TX | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_10_FULL:
|
|
ifmr->ifm_active |= IFM_10_T | IFM_FDX;
|
|
break;
|
|
}
|
|
if (layer & IXGBE_PHYSICAL_LAYER_SFP_PLUS_CU ||
|
|
layer & IXGBE_PHYSICAL_LAYER_SFP_ACTIVE_DA)
|
|
switch (adapter->link_speed) {
|
|
case IXGBE_LINK_SPEED_10GB_FULL:
|
|
ifmr->ifm_active |= IFM_10G_TWINAX | IFM_FDX;
|
|
break;
|
|
}
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_LR)
|
|
switch (adapter->link_speed) {
|
|
case IXGBE_LINK_SPEED_10GB_FULL:
|
|
ifmr->ifm_active |= IFM_10G_LR | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_1GB_FULL:
|
|
ifmr->ifm_active |= IFM_1000_LX | IFM_FDX;
|
|
break;
|
|
}
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_LRM)
|
|
switch (adapter->link_speed) {
|
|
case IXGBE_LINK_SPEED_10GB_FULL:
|
|
ifmr->ifm_active |= IFM_10G_LRM | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_1GB_FULL:
|
|
ifmr->ifm_active |= IFM_1000_LX | IFM_FDX;
|
|
break;
|
|
}
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_SR ||
|
|
layer & IXGBE_PHYSICAL_LAYER_1000BASE_SX)
|
|
switch (adapter->link_speed) {
|
|
case IXGBE_LINK_SPEED_10GB_FULL:
|
|
ifmr->ifm_active |= IFM_10G_SR | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_1GB_FULL:
|
|
ifmr->ifm_active |= IFM_1000_SX | IFM_FDX;
|
|
break;
|
|
}
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_CX4)
|
|
switch (adapter->link_speed) {
|
|
case IXGBE_LINK_SPEED_10GB_FULL:
|
|
ifmr->ifm_active |= IFM_10G_CX4 | IFM_FDX;
|
|
break;
|
|
}
|
|
/*
|
|
* XXX: These need to use the proper media types once
|
|
* they're added.
|
|
*/
|
|
#ifndef IFM_ETH_XTYPE
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_KR)
|
|
switch (adapter->link_speed) {
|
|
case IXGBE_LINK_SPEED_10GB_FULL:
|
|
ifmr->ifm_active |= IFM_10G_SR | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_2_5GB_FULL:
|
|
ifmr->ifm_active |= IFM_2500_SX | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_1GB_FULL:
|
|
ifmr->ifm_active |= IFM_1000_CX | IFM_FDX;
|
|
break;
|
|
}
|
|
else if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_KX4 ||
|
|
layer & IXGBE_PHYSICAL_LAYER_2500BASE_KX ||
|
|
layer & IXGBE_PHYSICAL_LAYER_1000BASE_KX)
|
|
switch (adapter->link_speed) {
|
|
case IXGBE_LINK_SPEED_10GB_FULL:
|
|
ifmr->ifm_active |= IFM_10G_CX4 | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_2_5GB_FULL:
|
|
ifmr->ifm_active |= IFM_2500_SX | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_1GB_FULL:
|
|
ifmr->ifm_active |= IFM_1000_CX | IFM_FDX;
|
|
break;
|
|
}
|
|
#else
|
|
if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_KR)
|
|
switch (adapter->link_speed) {
|
|
case IXGBE_LINK_SPEED_10GB_FULL:
|
|
ifmr->ifm_active |= IFM_10G_KR | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_2_5GB_FULL:
|
|
ifmr->ifm_active |= IFM_2500_KX | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_1GB_FULL:
|
|
ifmr->ifm_active |= IFM_1000_KX | IFM_FDX;
|
|
break;
|
|
}
|
|
else if (layer & IXGBE_PHYSICAL_LAYER_10GBASE_KX4 ||
|
|
layer & IXGBE_PHYSICAL_LAYER_2500BASE_KX ||
|
|
layer & IXGBE_PHYSICAL_LAYER_1000BASE_KX)
|
|
switch (adapter->link_speed) {
|
|
case IXGBE_LINK_SPEED_10GB_FULL:
|
|
ifmr->ifm_active |= IFM_10G_KX4 | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_2_5GB_FULL:
|
|
ifmr->ifm_active |= IFM_2500_KX | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_1GB_FULL:
|
|
ifmr->ifm_active |= IFM_1000_KX | IFM_FDX;
|
|
break;
|
|
}
|
|
#endif
|
|
|
|
/* If nothing is recognized... */
|
|
if (IFM_SUBTYPE(ifmr->ifm_active) == 0)
|
|
ifmr->ifm_active |= IFM_UNKNOWN;
|
|
|
|
/* Display current flow control setting used on link */
|
|
if (hw->fc.current_mode == ixgbe_fc_rx_pause ||
|
|
hw->fc.current_mode == ixgbe_fc_full)
|
|
ifmr->ifm_active |= IFM_ETH_RXPAUSE;
|
|
if (hw->fc.current_mode == ixgbe_fc_tx_pause ||
|
|
hw->fc.current_mode == ixgbe_fc_full)
|
|
ifmr->ifm_active |= IFM_ETH_TXPAUSE;
|
|
} /* ixgbe_media_status */
|
|
|
|
/************************************************************************
|
|
* ixgbe_media_change - Media Ioctl callback
|
|
*
|
|
* Called when the user changes speed/duplex using
|
|
* media/mediopt option with ifconfig.
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_if_media_change(if_ctx_t ctx)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
struct ifmedia *ifm = iflib_get_media(ctx);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
ixgbe_link_speed speed = 0;
|
|
|
|
INIT_DEBUGOUT("ixgbe_if_media_change: begin");
|
|
|
|
if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
|
|
return (EINVAL);
|
|
|
|
if (hw->phy.media_type == ixgbe_media_type_backplane)
|
|
return (EPERM);
|
|
|
|
/*
|
|
* We don't actually need to check against the supported
|
|
* media types of the adapter; ifmedia will take care of
|
|
* that for us.
|
|
*/
|
|
switch (IFM_SUBTYPE(ifm->ifm_media)) {
|
|
case IFM_AUTO:
|
|
case IFM_10G_T:
|
|
speed |= IXGBE_LINK_SPEED_100_FULL;
|
|
speed |= IXGBE_LINK_SPEED_1GB_FULL;
|
|
speed |= IXGBE_LINK_SPEED_10GB_FULL;
|
|
break;
|
|
case IFM_10G_LRM:
|
|
case IFM_10G_LR:
|
|
#ifndef IFM_ETH_XTYPE
|
|
case IFM_10G_SR: /* KR, too */
|
|
case IFM_10G_CX4: /* KX4 */
|
|
#else
|
|
case IFM_10G_KR:
|
|
case IFM_10G_KX4:
|
|
#endif
|
|
speed |= IXGBE_LINK_SPEED_1GB_FULL;
|
|
speed |= IXGBE_LINK_SPEED_10GB_FULL;
|
|
break;
|
|
#ifndef IFM_ETH_XTYPE
|
|
case IFM_1000_CX: /* KX */
|
|
#else
|
|
case IFM_1000_KX:
|
|
#endif
|
|
case IFM_1000_LX:
|
|
case IFM_1000_SX:
|
|
speed |= IXGBE_LINK_SPEED_1GB_FULL;
|
|
break;
|
|
case IFM_1000_T:
|
|
speed |= IXGBE_LINK_SPEED_100_FULL;
|
|
speed |= IXGBE_LINK_SPEED_1GB_FULL;
|
|
break;
|
|
case IFM_10G_TWINAX:
|
|
speed |= IXGBE_LINK_SPEED_10GB_FULL;
|
|
break;
|
|
case IFM_100_TX:
|
|
speed |= IXGBE_LINK_SPEED_100_FULL;
|
|
break;
|
|
case IFM_10_T:
|
|
speed |= IXGBE_LINK_SPEED_10_FULL;
|
|
break;
|
|
default:
|
|
goto invalid;
|
|
}
|
|
|
|
hw->mac.autotry_restart = TRUE;
|
|
hw->mac.ops.setup_link(hw, speed, TRUE);
|
|
adapter->advertise =
|
|
((speed & IXGBE_LINK_SPEED_10GB_FULL) ? 4 : 0) |
|
|
((speed & IXGBE_LINK_SPEED_1GB_FULL) ? 2 : 0) |
|
|
((speed & IXGBE_LINK_SPEED_100_FULL) ? 1 : 0) |
|
|
((speed & IXGBE_LINK_SPEED_10_FULL) ? 8 : 0);
|
|
|
|
return (0);
|
|
|
|
invalid:
|
|
device_printf(iflib_get_dev(ctx), "Invalid media type!\n");
|
|
|
|
return (EINVAL);
|
|
} /* ixgbe_if_media_change */
|
|
|
|
/************************************************************************
|
|
* ixgbe_set_promisc
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_if_promisc_set(if_ctx_t ctx, int flags)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
struct ifnet *ifp = iflib_get_ifp(ctx);
|
|
u32 rctl;
|
|
int mcnt = 0;
|
|
|
|
rctl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL);
|
|
rctl &= (~IXGBE_FCTRL_UPE);
|
|
if (ifp->if_flags & IFF_ALLMULTI)
|
|
mcnt = MAX_NUM_MULTICAST_ADDRESSES;
|
|
else {
|
|
mcnt = min(if_llmaddr_count(ifp), MAX_NUM_MULTICAST_ADDRESSES);
|
|
}
|
|
if (mcnt < MAX_NUM_MULTICAST_ADDRESSES)
|
|
rctl &= (~IXGBE_FCTRL_MPE);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, rctl);
|
|
|
|
if (ifp->if_flags & IFF_PROMISC) {
|
|
rctl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, rctl);
|
|
} else if (ifp->if_flags & IFF_ALLMULTI) {
|
|
rctl |= IXGBE_FCTRL_MPE;
|
|
rctl &= ~IXGBE_FCTRL_UPE;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, rctl);
|
|
}
|
|
return (0);
|
|
} /* ixgbe_if_promisc_set */
|
|
|
|
/************************************************************************
|
|
* ixgbe_msix_link - Link status change ISR (MSI/MSI-X)
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_msix_link(void *arg)
|
|
{
|
|
struct adapter *adapter = arg;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 eicr, eicr_mask;
|
|
s32 retval;
|
|
|
|
++adapter->link_irq;
|
|
|
|
/* Pause other interrupts */
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_OTHER);
|
|
|
|
/* First get the cause */
|
|
eicr = IXGBE_READ_REG(hw, IXGBE_EICS);
|
|
/* Be sure the queue bits are not cleared */
|
|
eicr &= ~IXGBE_EICR_RTX_QUEUE;
|
|
/* Clear interrupt with write */
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, eicr);
|
|
|
|
/* Link status change */
|
|
if (eicr & IXGBE_EICR_LSC) {
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_LSC);
|
|
adapter->task_requests |= IXGBE_REQUEST_TASK_LSC;
|
|
}
|
|
|
|
if (adapter->hw.mac.type != ixgbe_mac_82598EB) {
|
|
if ((adapter->feat_en & IXGBE_FEATURE_FDIR) &&
|
|
(eicr & IXGBE_EICR_FLOW_DIR)) {
|
|
/* This is probably overkill :) */
|
|
if (!atomic_cmpset_int(&adapter->fdir_reinit, 0, 1))
|
|
return (FILTER_HANDLED);
|
|
/* Disable the interrupt */
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EICR_FLOW_DIR);
|
|
adapter->task_requests |= IXGBE_REQUEST_TASK_FDIR;
|
|
} else
|
|
if (eicr & IXGBE_EICR_ECC) {
|
|
device_printf(iflib_get_dev(adapter->ctx),
|
|
"\nCRITICAL: ECC ERROR!! Please Reboot!!\n");
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_ECC);
|
|
}
|
|
|
|
/* Check for over temp condition */
|
|
if (adapter->feat_en & IXGBE_FEATURE_TEMP_SENSOR) {
|
|
switch (adapter->hw.mac.type) {
|
|
case ixgbe_mac_X550EM_a:
|
|
if (!(eicr & IXGBE_EICR_GPI_SDP0_X550EM_a))
|
|
break;
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMC,
|
|
IXGBE_EICR_GPI_SDP0_X550EM_a);
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR,
|
|
IXGBE_EICR_GPI_SDP0_X550EM_a);
|
|
retval = hw->phy.ops.check_overtemp(hw);
|
|
if (retval != IXGBE_ERR_OVERTEMP)
|
|
break;
|
|
device_printf(iflib_get_dev(adapter->ctx),
|
|
"\nCRITICAL: OVER TEMP!! PHY IS SHUT DOWN!!\n");
|
|
device_printf(iflib_get_dev(adapter->ctx),
|
|
"System shutdown required!\n");
|
|
break;
|
|
default:
|
|
if (!(eicr & IXGBE_EICR_TS))
|
|
break;
|
|
retval = hw->phy.ops.check_overtemp(hw);
|
|
if (retval != IXGBE_ERR_OVERTEMP)
|
|
break;
|
|
device_printf(iflib_get_dev(adapter->ctx),
|
|
"\nCRITICAL: OVER TEMP!! PHY IS SHUT DOWN!!\n");
|
|
device_printf(iflib_get_dev(adapter->ctx),
|
|
"System shutdown required!\n");
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_TS);
|
|
break;
|
|
}
|
|
}
|
|
|
|
/* Check for VF message */
|
|
if ((adapter->feat_en & IXGBE_FEATURE_SRIOV) &&
|
|
(eicr & IXGBE_EICR_MAILBOX))
|
|
adapter->task_requests |= IXGBE_REQUEST_TASK_MBX;
|
|
}
|
|
|
|
if (ixgbe_is_sfp(hw)) {
|
|
/* Pluggable optics-related interrupt */
|
|
if (hw->mac.type >= ixgbe_mac_X540)
|
|
eicr_mask = IXGBE_EICR_GPI_SDP0_X540;
|
|
else
|
|
eicr_mask = IXGBE_EICR_GPI_SDP2_BY_MAC(hw);
|
|
|
|
if (eicr & eicr_mask) {
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, eicr_mask);
|
|
adapter->task_requests |= IXGBE_REQUEST_TASK_MOD;
|
|
}
|
|
|
|
if ((hw->mac.type == ixgbe_mac_82599EB) &&
|
|
(eicr & IXGBE_EICR_GPI_SDP1_BY_MAC(hw))) {
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR,
|
|
IXGBE_EICR_GPI_SDP1_BY_MAC(hw));
|
|
adapter->task_requests |= IXGBE_REQUEST_TASK_MSF;
|
|
}
|
|
}
|
|
|
|
/* Check for fan failure */
|
|
if (adapter->feat_en & IXGBE_FEATURE_FAN_FAIL) {
|
|
ixgbe_check_fan_failure(adapter, eicr, TRUE);
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1_BY_MAC(hw));
|
|
}
|
|
|
|
/* External PHY interrupt */
|
|
if ((hw->phy.type == ixgbe_phy_x550em_ext_t) &&
|
|
(eicr & IXGBE_EICR_GPI_SDP0_X540)) {
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP0_X540);
|
|
adapter->task_requests |= IXGBE_REQUEST_TASK_PHY;
|
|
}
|
|
|
|
return (adapter->task_requests != 0) ? FILTER_SCHEDULE_THREAD : FILTER_HANDLED;
|
|
} /* ixgbe_msix_link */
|
|
|
|
/************************************************************************
|
|
* ixgbe_sysctl_interrupt_rate_handler
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_sysctl_interrupt_rate_handler(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct ix_rx_queue *que = ((struct ix_rx_queue *)oidp->oid_arg1);
|
|
int error;
|
|
unsigned int reg, usec, rate;
|
|
|
|
reg = IXGBE_READ_REG(&que->adapter->hw, IXGBE_EITR(que->msix));
|
|
usec = ((reg & 0x0FF8) >> 3);
|
|
if (usec > 0)
|
|
rate = 500000 / usec;
|
|
else
|
|
rate = 0;
|
|
error = sysctl_handle_int(oidp, &rate, 0, req);
|
|
if (error || !req->newptr)
|
|
return error;
|
|
reg &= ~0xfff; /* default, no limitation */
|
|
ixgbe_max_interrupt_rate = 0;
|
|
if (rate > 0 && rate < 500000) {
|
|
if (rate < 1000)
|
|
rate = 1000;
|
|
ixgbe_max_interrupt_rate = rate;
|
|
reg |= ((4000000/rate) & 0xff8);
|
|
}
|
|
IXGBE_WRITE_REG(&que->adapter->hw, IXGBE_EITR(que->msix), reg);
|
|
|
|
return (0);
|
|
} /* ixgbe_sysctl_interrupt_rate_handler */
|
|
|
|
/************************************************************************
|
|
* ixgbe_add_device_sysctls
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_add_device_sysctls(if_ctx_t ctx)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
device_t dev = iflib_get_dev(ctx);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct sysctl_oid_list *child;
|
|
struct sysctl_ctx_list *ctx_list;
|
|
|
|
ctx_list = device_get_sysctl_ctx(dev);
|
|
child = SYSCTL_CHILDREN(device_get_sysctl_tree(dev));
|
|
|
|
/* Sysctls for all devices */
|
|
SYSCTL_ADD_PROC(ctx_list, child, OID_AUTO, "fc",
|
|
CTLTYPE_INT | CTLFLAG_RW, adapter, 0, ixgbe_sysctl_flowcntl, "I",
|
|
IXGBE_SYSCTL_DESC_SET_FC);
|
|
|
|
SYSCTL_ADD_PROC(ctx_list, child, OID_AUTO, "advertise_speed",
|
|
CTLTYPE_INT | CTLFLAG_RW, adapter, 0, ixgbe_sysctl_advertise, "I",
|
|
IXGBE_SYSCTL_DESC_ADV_SPEED);
|
|
|
|
#ifdef IXGBE_DEBUG
|
|
/* testing sysctls (for all devices) */
|
|
SYSCTL_ADD_PROC(ctx_list, child, OID_AUTO, "power_state",
|
|
CTLTYPE_INT | CTLFLAG_RW, adapter, 0, ixgbe_sysctl_power_state,
|
|
"I", "PCI Power State");
|
|
|
|
SYSCTL_ADD_PROC(ctx_list, child, OID_AUTO, "print_rss_config",
|
|
CTLTYPE_STRING | CTLFLAG_RD, adapter, 0,
|
|
ixgbe_sysctl_print_rss_config, "A", "Prints RSS Configuration");
|
|
#endif
|
|
/* for X550 series devices */
|
|
if (hw->mac.type >= ixgbe_mac_X550)
|
|
SYSCTL_ADD_PROC(ctx_list, child, OID_AUTO, "dmac",
|
|
CTLTYPE_U16 | CTLFLAG_RW, adapter, 0, ixgbe_sysctl_dmac,
|
|
"I", "DMA Coalesce");
|
|
|
|
/* for WoL-capable devices */
|
|
if (hw->device_id == IXGBE_DEV_ID_X550EM_X_10G_T) {
|
|
SYSCTL_ADD_PROC(ctx_list, child, OID_AUTO, "wol_enable",
|
|
CTLTYPE_INT | CTLFLAG_RW, adapter, 0,
|
|
ixgbe_sysctl_wol_enable, "I", "Enable/Disable Wake on LAN");
|
|
|
|
SYSCTL_ADD_PROC(ctx_list, child, OID_AUTO, "wufc",
|
|
CTLTYPE_U32 | CTLFLAG_RW, adapter, 0, ixgbe_sysctl_wufc,
|
|
"I", "Enable/Disable Wake Up Filters");
|
|
}
|
|
|
|
/* for X552/X557-AT devices */
|
|
if (hw->device_id == IXGBE_DEV_ID_X550EM_X_10G_T) {
|
|
struct sysctl_oid *phy_node;
|
|
struct sysctl_oid_list *phy_list;
|
|
|
|
phy_node = SYSCTL_ADD_NODE(ctx_list, child, OID_AUTO, "phy",
|
|
CTLFLAG_RD, NULL, "External PHY sysctls");
|
|
phy_list = SYSCTL_CHILDREN(phy_node);
|
|
|
|
SYSCTL_ADD_PROC(ctx_list, phy_list, OID_AUTO, "temp",
|
|
CTLTYPE_U16 | CTLFLAG_RD, adapter, 0, ixgbe_sysctl_phy_temp,
|
|
"I", "Current External PHY Temperature (Celsius)");
|
|
|
|
SYSCTL_ADD_PROC(ctx_list, phy_list, OID_AUTO,
|
|
"overtemp_occurred", CTLTYPE_U16 | CTLFLAG_RD, adapter, 0,
|
|
ixgbe_sysctl_phy_overtemp_occurred, "I",
|
|
"External PHY High Temperature Event Occurred");
|
|
}
|
|
|
|
if (adapter->feat_cap & IXGBE_FEATURE_EEE) {
|
|
SYSCTL_ADD_PROC(ctx_list, child, OID_AUTO, "eee_state",
|
|
CTLTYPE_INT | CTLFLAG_RW, adapter, 0,
|
|
ixgbe_sysctl_eee_state, "I", "EEE Power Save State");
|
|
}
|
|
} /* ixgbe_add_device_sysctls */
|
|
|
|
/************************************************************************
|
|
* ixgbe_allocate_pci_resources
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_allocate_pci_resources(if_ctx_t ctx)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
device_t dev = iflib_get_dev(ctx);
|
|
int rid;
|
|
|
|
rid = PCIR_BAR(0);
|
|
adapter->pci_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY, &rid,
|
|
RF_ACTIVE);
|
|
|
|
if (!(adapter->pci_mem)) {
|
|
device_printf(dev, "Unable to allocate bus resource: memory\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
/* Save bus_space values for READ/WRITE_REG macros */
|
|
adapter->osdep.mem_bus_space_tag = rman_get_bustag(adapter->pci_mem);
|
|
adapter->osdep.mem_bus_space_handle =
|
|
rman_get_bushandle(adapter->pci_mem);
|
|
/* Set hw values for shared code */
|
|
adapter->hw.hw_addr = (u8 *)&adapter->osdep.mem_bus_space_handle;
|
|
|
|
return (0);
|
|
} /* ixgbe_allocate_pci_resources */
|
|
|
|
/************************************************************************
|
|
* ixgbe_detach - Device removal routine
|
|
*
|
|
* Called when the driver is being removed.
|
|
* Stops the adapter and deallocates all the resources
|
|
* that were allocated for driver operation.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_if_detach(if_ctx_t ctx)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
device_t dev = iflib_get_dev(ctx);
|
|
u32 ctrl_ext;
|
|
|
|
INIT_DEBUGOUT("ixgbe_detach: begin");
|
|
|
|
if (ixgbe_pci_iov_detach(dev) != 0) {
|
|
device_printf(dev, "SR-IOV in use; detach first.\n");
|
|
return (EBUSY);
|
|
}
|
|
|
|
ixgbe_setup_low_power_mode(ctx);
|
|
|
|
/* let hardware know driver is unloading */
|
|
ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT);
|
|
ctrl_ext &= ~IXGBE_CTRL_EXT_DRV_LOAD;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, ctrl_ext);
|
|
|
|
ixgbe_free_pci_resources(ctx);
|
|
free(adapter->mta, M_IXGBE);
|
|
|
|
return (0);
|
|
} /* ixgbe_if_detach */
|
|
|
|
/************************************************************************
|
|
* ixgbe_setup_low_power_mode - LPLU/WoL preparation
|
|
*
|
|
* Prepare the adapter/port for LPLU and/or WoL
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_setup_low_power_mode(if_ctx_t ctx)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
device_t dev = iflib_get_dev(ctx);
|
|
s32 error = 0;
|
|
|
|
if (!hw->wol_enabled)
|
|
ixgbe_set_phy_power(hw, FALSE);
|
|
|
|
/* Limit power management flow to X550EM baseT */
|
|
if (hw->device_id == IXGBE_DEV_ID_X550EM_X_10G_T &&
|
|
hw->phy.ops.enter_lplu) {
|
|
/* Turn off support for APM wakeup. (Using ACPI instead) */
|
|
IXGBE_WRITE_REG(hw, IXGBE_GRC,
|
|
IXGBE_READ_REG(hw, IXGBE_GRC) & ~(u32)2);
|
|
|
|
/*
|
|
* Clear Wake Up Status register to prevent any previous wakeup
|
|
* events from waking us up immediately after we suspend.
|
|
*/
|
|
IXGBE_WRITE_REG(hw, IXGBE_WUS, 0xffffffff);
|
|
|
|
/*
|
|
* Program the Wakeup Filter Control register with user filter
|
|
* settings
|
|
*/
|
|
IXGBE_WRITE_REG(hw, IXGBE_WUFC, adapter->wufc);
|
|
|
|
/* Enable wakeups and power management in Wakeup Control */
|
|
IXGBE_WRITE_REG(hw, IXGBE_WUC,
|
|
IXGBE_WUC_WKEN | IXGBE_WUC_PME_EN);
|
|
|
|
/* X550EM baseT adapters need a special LPLU flow */
|
|
hw->phy.reset_disable = TRUE;
|
|
ixgbe_if_stop(ctx);
|
|
error = hw->phy.ops.enter_lplu(hw);
|
|
if (error)
|
|
device_printf(dev, "Error entering LPLU: %d\n", error);
|
|
hw->phy.reset_disable = FALSE;
|
|
} else {
|
|
/* Just stop for other adapters */
|
|
ixgbe_if_stop(ctx);
|
|
}
|
|
|
|
return error;
|
|
} /* ixgbe_setup_low_power_mode */
|
|
|
|
/************************************************************************
|
|
* ixgbe_shutdown - Shutdown entry point
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_if_shutdown(if_ctx_t ctx)
|
|
{
|
|
int error = 0;
|
|
|
|
INIT_DEBUGOUT("ixgbe_shutdown: begin");
|
|
|
|
error = ixgbe_setup_low_power_mode(ctx);
|
|
|
|
return (error);
|
|
} /* ixgbe_if_shutdown */
|
|
|
|
/************************************************************************
|
|
* ixgbe_suspend
|
|
*
|
|
* From D0 to D3
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_if_suspend(if_ctx_t ctx)
|
|
{
|
|
int error = 0;
|
|
|
|
INIT_DEBUGOUT("ixgbe_suspend: begin");
|
|
|
|
error = ixgbe_setup_low_power_mode(ctx);
|
|
|
|
return (error);
|
|
} /* ixgbe_if_suspend */
|
|
|
|
/************************************************************************
|
|
* ixgbe_resume
|
|
*
|
|
* From D3 to D0
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_if_resume(if_ctx_t ctx)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
device_t dev = iflib_get_dev(ctx);
|
|
struct ifnet *ifp = iflib_get_ifp(ctx);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 wus;
|
|
|
|
INIT_DEBUGOUT("ixgbe_resume: begin");
|
|
|
|
/* Read & clear WUS register */
|
|
wus = IXGBE_READ_REG(hw, IXGBE_WUS);
|
|
if (wus)
|
|
device_printf(dev, "Woken up by (WUS): %#010x\n",
|
|
IXGBE_READ_REG(hw, IXGBE_WUS));
|
|
IXGBE_WRITE_REG(hw, IXGBE_WUS, 0xffffffff);
|
|
/* And clear WUFC until next low-power transition */
|
|
IXGBE_WRITE_REG(hw, IXGBE_WUFC, 0);
|
|
|
|
/*
|
|
* Required after D3->D0 transition;
|
|
* will re-advertise all previous advertised speeds
|
|
*/
|
|
if (ifp->if_flags & IFF_UP)
|
|
ixgbe_if_init(ctx);
|
|
|
|
return (0);
|
|
} /* ixgbe_if_resume */
|
|
|
|
/************************************************************************
|
|
* ixgbe_if_mtu_set - Ioctl mtu entry point
|
|
*
|
|
* Return 0 on success, EINVAL on failure
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_if_mtu_set(if_ctx_t ctx, uint32_t mtu)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
int error = 0;
|
|
|
|
IOCTL_DEBUGOUT("ioctl: SIOCIFMTU (Set Interface MTU)");
|
|
|
|
if (mtu > IXGBE_MAX_MTU) {
|
|
error = EINVAL;
|
|
} else {
|
|
adapter->max_frame_size = mtu + IXGBE_MTU_HDR;
|
|
}
|
|
|
|
return error;
|
|
} /* ixgbe_if_mtu_set */
|
|
|
|
/************************************************************************
|
|
* ixgbe_if_crcstrip_set
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_if_crcstrip_set(if_ctx_t ctx, int onoff, int crcstrip)
|
|
{
|
|
struct adapter *sc = iflib_get_softc(ctx);
|
|
struct ixgbe_hw *hw = &sc->hw;
|
|
/* crc stripping is set in two places:
|
|
* IXGBE_HLREG0 (modified on init_locked and hw reset)
|
|
* IXGBE_RDRXCTL (set by the original driver in
|
|
* ixgbe_setup_hw_rsc() called in init_locked.
|
|
* We disable the setting when netmap is compiled in).
|
|
* We update the values here, but also in ixgbe.c because
|
|
* init_locked sometimes is called outside our control.
|
|
*/
|
|
uint32_t hl, rxc;
|
|
|
|
hl = IXGBE_READ_REG(hw, IXGBE_HLREG0);
|
|
rxc = IXGBE_READ_REG(hw, IXGBE_RDRXCTL);
|
|
#ifdef NETMAP
|
|
if (netmap_verbose)
|
|
D("%s read HLREG 0x%x rxc 0x%x",
|
|
onoff ? "enter" : "exit", hl, rxc);
|
|
#endif
|
|
/* hw requirements ... */
|
|
rxc &= ~IXGBE_RDRXCTL_RSCFRSTSIZE;
|
|
rxc |= IXGBE_RDRXCTL_RSCACKC;
|
|
if (onoff && !crcstrip) {
|
|
/* keep the crc. Fast rx */
|
|
hl &= ~IXGBE_HLREG0_RXCRCSTRP;
|
|
rxc &= ~IXGBE_RDRXCTL_CRCSTRIP;
|
|
} else {
|
|
/* reset default mode */
|
|
hl |= IXGBE_HLREG0_RXCRCSTRP;
|
|
rxc |= IXGBE_RDRXCTL_CRCSTRIP;
|
|
}
|
|
#ifdef NETMAP
|
|
if (netmap_verbose)
|
|
D("%s write HLREG 0x%x rxc 0x%x",
|
|
onoff ? "enter" : "exit", hl, rxc);
|
|
#endif
|
|
IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hl);
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDRXCTL, rxc);
|
|
} /* ixgbe_if_crcstrip_set */
|
|
|
|
/*********************************************************************
|
|
* ixgbe_if_init - Init entry point
|
|
*
|
|
* Used in two ways: It is used by the stack as an init
|
|
* entry point in network interface structure. It is also
|
|
* used by the driver as a hw/sw initialization routine to
|
|
* get to a consistent state.
|
|
*
|
|
* Return 0 on success, positive on failure
|
|
**********************************************************************/
|
|
void
|
|
ixgbe_if_init(if_ctx_t ctx)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
struct ifnet *ifp = iflib_get_ifp(ctx);
|
|
device_t dev = iflib_get_dev(ctx);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct ix_rx_queue *rx_que;
|
|
struct ix_tx_queue *tx_que;
|
|
u32 txdctl, mhadd;
|
|
u32 rxdctl, rxctrl;
|
|
u32 ctrl_ext;
|
|
|
|
int i, j, err;
|
|
|
|
INIT_DEBUGOUT("ixgbe_if_init: begin");
|
|
|
|
/* Queue indices may change with IOV mode */
|
|
ixgbe_align_all_queue_indices(adapter);
|
|
|
|
/* reprogram the RAR[0] in case user changed it. */
|
|
ixgbe_set_rar(hw, 0, hw->mac.addr, adapter->pool, IXGBE_RAH_AV);
|
|
|
|
/* Get the latest mac address, User can use a LAA */
|
|
bcopy(IF_LLADDR(ifp), hw->mac.addr, IXGBE_ETH_LENGTH_OF_ADDRESS);
|
|
ixgbe_set_rar(hw, 0, hw->mac.addr, adapter->pool, 1);
|
|
hw->addr_ctrl.rar_used_count = 1;
|
|
|
|
ixgbe_init_hw(hw);
|
|
|
|
ixgbe_initialize_iov(adapter);
|
|
|
|
ixgbe_initialize_transmit_units(ctx);
|
|
|
|
/* Setup Multicast table */
|
|
ixgbe_if_multi_set(ctx);
|
|
|
|
/* Determine the correct mbuf pool, based on frame size */
|
|
adapter->rx_mbuf_sz = iflib_get_rx_mbuf_sz(ctx);
|
|
|
|
/* Configure RX settings */
|
|
ixgbe_initialize_receive_units(ctx);
|
|
|
|
/*
|
|
* Initialize variable holding task enqueue requests
|
|
* from MSI-X interrupts
|
|
*/
|
|
adapter->task_requests = 0;
|
|
|
|
/* Enable SDP & MSI-X interrupts based on adapter */
|
|
ixgbe_config_gpie(adapter);
|
|
|
|
/* Set MTU size */
|
|
if (ifp->if_mtu > ETHERMTU) {
|
|
/* aka IXGBE_MAXFRS on 82599 and newer */
|
|
mhadd = IXGBE_READ_REG(hw, IXGBE_MHADD);
|
|
mhadd &= ~IXGBE_MHADD_MFS_MASK;
|
|
mhadd |= adapter->max_frame_size << IXGBE_MHADD_MFS_SHIFT;
|
|
IXGBE_WRITE_REG(hw, IXGBE_MHADD, mhadd);
|
|
}
|
|
|
|
/* Now enable all the queues */
|
|
for (i = 0, tx_que = adapter->tx_queues; i < adapter->num_tx_queues; i++, tx_que++) {
|
|
struct tx_ring *txr = &tx_que->txr;
|
|
|
|
txdctl = IXGBE_READ_REG(hw, IXGBE_TXDCTL(txr->me));
|
|
txdctl |= IXGBE_TXDCTL_ENABLE;
|
|
/* Set WTHRESH to 8, burst writeback */
|
|
txdctl |= (8 << 16);
|
|
/*
|
|
* When the internal queue falls below PTHRESH (32),
|
|
* start prefetching as long as there are at least
|
|
* HTHRESH (1) buffers ready. The values are taken
|
|
* from the Intel linux driver 3.8.21.
|
|
* Prefetching enables tx line rate even with 1 queue.
|
|
*/
|
|
txdctl |= (32 << 0) | (1 << 8);
|
|
IXGBE_WRITE_REG(hw, IXGBE_TXDCTL(txr->me), txdctl);
|
|
}
|
|
|
|
for (i = 0, rx_que = adapter->rx_queues; i < adapter->num_rx_queues; i++, rx_que++) {
|
|
struct rx_ring *rxr = &rx_que->rxr;
|
|
|
|
rxdctl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(rxr->me));
|
|
if (hw->mac.type == ixgbe_mac_82598EB) {
|
|
/*
|
|
* PTHRESH = 21
|
|
* HTHRESH = 4
|
|
* WTHRESH = 8
|
|
*/
|
|
rxdctl &= ~0x3FFFFF;
|
|
rxdctl |= 0x080420;
|
|
}
|
|
rxdctl |= IXGBE_RXDCTL_ENABLE;
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(rxr->me), rxdctl);
|
|
for (j = 0; j < 10; j++) {
|
|
if (IXGBE_READ_REG(hw, IXGBE_RXDCTL(rxr->me)) &
|
|
IXGBE_RXDCTL_ENABLE)
|
|
break;
|
|
else
|
|
msec_delay(1);
|
|
}
|
|
wmb();
|
|
}
|
|
|
|
/* Enable Receive engine */
|
|
rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
|
|
if (hw->mac.type == ixgbe_mac_82598EB)
|
|
rxctrl |= IXGBE_RXCTRL_DMBYPS;
|
|
rxctrl |= IXGBE_RXCTRL_RXEN;
|
|
ixgbe_enable_rx_dma(hw, rxctrl);
|
|
|
|
/* Set up MSI/MSI-X routing */
|
|
if (ixgbe_enable_msix) {
|
|
ixgbe_configure_ivars(adapter);
|
|
/* Set up auto-mask */
|
|
if (hw->mac.type == ixgbe_mac_82598EB)
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE);
|
|
else {
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(0), 0xFFFFFFFF);
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIAM_EX(1), 0xFFFFFFFF);
|
|
}
|
|
} else { /* Simple settings for Legacy/MSI */
|
|
ixgbe_set_ivar(adapter, 0, 0, 0);
|
|
ixgbe_set_ivar(adapter, 0, 0, 1);
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIAM, IXGBE_EICS_RTX_QUEUE);
|
|
}
|
|
|
|
ixgbe_init_fdir(adapter);
|
|
|
|
/*
|
|
* Check on any SFP devices that
|
|
* need to be kick-started
|
|
*/
|
|
if (hw->phy.type == ixgbe_phy_none) {
|
|
err = hw->phy.ops.identify(hw);
|
|
if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
device_printf(dev,
|
|
"Unsupported SFP+ module type was detected.\n");
|
|
return;
|
|
}
|
|
}
|
|
|
|
/* Set moderation on the Link interrupt */
|
|
IXGBE_WRITE_REG(hw, IXGBE_EITR(adapter->vector), IXGBE_LINK_ITR);
|
|
|
|
/* Enable power to the phy. */
|
|
ixgbe_set_phy_power(hw, TRUE);
|
|
|
|
/* Config/Enable Link */
|
|
ixgbe_config_link(ctx);
|
|
|
|
/* Hardware Packet Buffer & Flow Control setup */
|
|
ixgbe_config_delay_values(adapter);
|
|
|
|
/* Initialize the FC settings */
|
|
ixgbe_start_hw(hw);
|
|
|
|
/* Set up VLAN support and filter */
|
|
ixgbe_setup_vlan_hw_support(ctx);
|
|
|
|
/* Setup DMA Coalescing */
|
|
ixgbe_config_dmac(adapter);
|
|
|
|
/* And now turn on interrupts */
|
|
ixgbe_if_enable_intr(ctx);
|
|
|
|
/* Enable the use of the MBX by the VF's */
|
|
if (adapter->feat_en & IXGBE_FEATURE_SRIOV) {
|
|
ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
|
|
ctrl_ext |= IXGBE_CTRL_EXT_PFRSTD;
|
|
IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
|
|
}
|
|
|
|
} /* ixgbe_init_locked */
|
|
|
|
/************************************************************************
|
|
* ixgbe_set_ivar
|
|
*
|
|
* Setup the correct IVAR register for a particular MSI-X interrupt
|
|
* (yes this is all very magic and confusing :)
|
|
* - entry is the register array entry
|
|
* - vector is the MSI-X vector for this queue
|
|
* - type is RX/TX/MISC
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_set_ivar(struct adapter *adapter, u8 entry, u8 vector, s8 type)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 ivar, index;
|
|
|
|
vector |= IXGBE_IVAR_ALLOC_VAL;
|
|
|
|
switch (hw->mac.type) {
|
|
case ixgbe_mac_82598EB:
|
|
if (type == -1)
|
|
entry = IXGBE_IVAR_OTHER_CAUSES_INDEX;
|
|
else
|
|
entry += (type * 64);
|
|
index = (entry >> 2) & 0x1F;
|
|
ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(index));
|
|
ivar &= ~(0xFF << (8 * (entry & 0x3)));
|
|
ivar |= (vector << (8 * (entry & 0x3)));
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_IVAR(index), ivar);
|
|
break;
|
|
case ixgbe_mac_82599EB:
|
|
case ixgbe_mac_X540:
|
|
case ixgbe_mac_X550:
|
|
case ixgbe_mac_X550EM_x:
|
|
case ixgbe_mac_X550EM_a:
|
|
if (type == -1) { /* MISC IVAR */
|
|
index = (entry & 1) * 8;
|
|
ivar = IXGBE_READ_REG(hw, IXGBE_IVAR_MISC);
|
|
ivar &= ~(0xFF << index);
|
|
ivar |= (vector << index);
|
|
IXGBE_WRITE_REG(hw, IXGBE_IVAR_MISC, ivar);
|
|
} else { /* RX/TX IVARS */
|
|
index = (16 * (entry & 1)) + (8 * type);
|
|
ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(entry >> 1));
|
|
ivar &= ~(0xFF << index);
|
|
ivar |= (vector << index);
|
|
IXGBE_WRITE_REG(hw, IXGBE_IVAR(entry >> 1), ivar);
|
|
}
|
|
default:
|
|
break;
|
|
}
|
|
} /* ixgbe_set_ivar */
|
|
|
|
/************************************************************************
|
|
* ixgbe_configure_ivars
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_configure_ivars(struct adapter *adapter)
|
|
{
|
|
struct ix_rx_queue *rx_que = adapter->rx_queues;
|
|
struct ix_tx_queue *tx_que = adapter->tx_queues;
|
|
u32 newitr;
|
|
|
|
if (ixgbe_max_interrupt_rate > 0)
|
|
newitr = (4000000 / ixgbe_max_interrupt_rate) & 0x0FF8;
|
|
else {
|
|
/*
|
|
* Disable DMA coalescing if interrupt moderation is
|
|
* disabled.
|
|
*/
|
|
adapter->dmac = 0;
|
|
newitr = 0;
|
|
}
|
|
|
|
for (int i = 0; i < adapter->num_rx_queues; i++, rx_que++) {
|
|
struct rx_ring *rxr = &rx_que->rxr;
|
|
|
|
/* First the RX queue entry */
|
|
ixgbe_set_ivar(adapter, rxr->me, rx_que->msix, 0);
|
|
|
|
/* Set an Initial EITR value */
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(rx_que->msix), newitr);
|
|
}
|
|
for (int i = 0; i < adapter->num_tx_queues; i++, tx_que++) {
|
|
struct tx_ring *txr = &tx_que->txr;
|
|
|
|
/* ... and the TX */
|
|
ixgbe_set_ivar(adapter, txr->me, tx_que->msix, 1);
|
|
}
|
|
/* For the Link interrupt */
|
|
ixgbe_set_ivar(adapter, 1, adapter->vector, -1);
|
|
} /* ixgbe_configure_ivars */
|
|
|
|
/************************************************************************
|
|
* ixgbe_config_gpie
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_config_gpie(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 gpie;
|
|
|
|
gpie = IXGBE_READ_REG(hw, IXGBE_GPIE);
|
|
|
|
if (adapter->intr_type == IFLIB_INTR_MSIX) {
|
|
/* Enable Enhanced MSI-X mode */
|
|
gpie |= IXGBE_GPIE_MSIX_MODE
|
|
| IXGBE_GPIE_EIAME
|
|
| IXGBE_GPIE_PBA_SUPPORT
|
|
| IXGBE_GPIE_OCD;
|
|
}
|
|
|
|
/* Fan Failure Interrupt */
|
|
if (adapter->feat_en & IXGBE_FEATURE_FAN_FAIL)
|
|
gpie |= IXGBE_SDP1_GPIEN;
|
|
|
|
/* Thermal Sensor Interrupt */
|
|
if (adapter->feat_en & IXGBE_FEATURE_TEMP_SENSOR)
|
|
gpie |= IXGBE_SDP0_GPIEN_X540;
|
|
|
|
/* Link detection */
|
|
switch (hw->mac.type) {
|
|
case ixgbe_mac_82599EB:
|
|
gpie |= IXGBE_SDP1_GPIEN | IXGBE_SDP2_GPIEN;
|
|
break;
|
|
case ixgbe_mac_X550EM_x:
|
|
case ixgbe_mac_X550EM_a:
|
|
gpie |= IXGBE_SDP0_GPIEN_X540;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_GPIE, gpie);
|
|
|
|
} /* ixgbe_config_gpie */
|
|
|
|
/************************************************************************
|
|
* ixgbe_config_delay_values
|
|
*
|
|
* Requires adapter->max_frame_size to be set.
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_config_delay_values(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 rxpb, frame, size, tmp;
|
|
|
|
frame = adapter->max_frame_size;
|
|
|
|
/* Calculate High Water */
|
|
switch (hw->mac.type) {
|
|
case ixgbe_mac_X540:
|
|
case ixgbe_mac_X550:
|
|
case ixgbe_mac_X550EM_x:
|
|
case ixgbe_mac_X550EM_a:
|
|
tmp = IXGBE_DV_X540(frame, frame);
|
|
break;
|
|
default:
|
|
tmp = IXGBE_DV(frame, frame);
|
|
break;
|
|
}
|
|
size = IXGBE_BT2KB(tmp);
|
|
rxpb = IXGBE_READ_REG(hw, IXGBE_RXPBSIZE(0)) >> 10;
|
|
hw->fc.high_water[0] = rxpb - size;
|
|
|
|
/* Now calculate Low Water */
|
|
switch (hw->mac.type) {
|
|
case ixgbe_mac_X540:
|
|
case ixgbe_mac_X550:
|
|
case ixgbe_mac_X550EM_x:
|
|
case ixgbe_mac_X550EM_a:
|
|
tmp = IXGBE_LOW_DV_X540(frame);
|
|
break;
|
|
default:
|
|
tmp = IXGBE_LOW_DV(frame);
|
|
break;
|
|
}
|
|
hw->fc.low_water[0] = IXGBE_BT2KB(tmp);
|
|
|
|
hw->fc.pause_time = IXGBE_FC_PAUSE;
|
|
hw->fc.send_xon = TRUE;
|
|
} /* ixgbe_config_delay_values */
|
|
|
|
/************************************************************************
|
|
* ixgbe_set_multi - Multicast Update
|
|
*
|
|
* Called whenever multicast address list is updated.
|
|
************************************************************************/
|
|
static u_int
|
|
ixgbe_mc_filter_apply(void *arg, struct sockaddr_dl *sdl, u_int count)
|
|
{
|
|
struct adapter *adapter = arg;
|
|
struct ixgbe_mc_addr *mta = adapter->mta;
|
|
|
|
if (count == MAX_NUM_MULTICAST_ADDRESSES)
|
|
return (0);
|
|
bcopy(LLADDR(sdl), mta[count].addr, IXGBE_ETH_LENGTH_OF_ADDRESS);
|
|
mta[count].vmdq = adapter->pool;
|
|
|
|
return (1);
|
|
} /* ixgbe_mc_filter_apply */
|
|
|
|
static void
|
|
ixgbe_if_multi_set(if_ctx_t ctx)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
struct ixgbe_mc_addr *mta;
|
|
struct ifnet *ifp = iflib_get_ifp(ctx);
|
|
u8 *update_ptr;
|
|
u32 fctrl;
|
|
u_int mcnt;
|
|
|
|
IOCTL_DEBUGOUT("ixgbe_if_multi_set: begin");
|
|
|
|
mta = adapter->mta;
|
|
bzero(mta, sizeof(*mta) * MAX_NUM_MULTICAST_ADDRESSES);
|
|
|
|
mcnt = if_foreach_llmaddr(iflib_get_ifp(ctx), ixgbe_mc_filter_apply,
|
|
adapter);
|
|
|
|
fctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL);
|
|
fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
|
|
if (ifp->if_flags & IFF_PROMISC)
|
|
fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
|
|
else if (mcnt >= MAX_NUM_MULTICAST_ADDRESSES ||
|
|
ifp->if_flags & IFF_ALLMULTI) {
|
|
fctrl |= IXGBE_FCTRL_MPE;
|
|
fctrl &= ~IXGBE_FCTRL_UPE;
|
|
} else
|
|
fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
|
|
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, fctrl);
|
|
|
|
if (mcnt < MAX_NUM_MULTICAST_ADDRESSES) {
|
|
update_ptr = (u8 *)mta;
|
|
ixgbe_update_mc_addr_list(&adapter->hw, update_ptr, mcnt,
|
|
ixgbe_mc_array_itr, TRUE);
|
|
}
|
|
|
|
} /* ixgbe_if_multi_set */
|
|
|
|
/************************************************************************
|
|
* ixgbe_mc_array_itr
|
|
*
|
|
* An iterator function needed by the multicast shared code.
|
|
* It feeds the shared code routine the addresses in the
|
|
* array of ixgbe_set_multi() one by one.
|
|
************************************************************************/
|
|
static u8 *
|
|
ixgbe_mc_array_itr(struct ixgbe_hw *hw, u8 **update_ptr, u32 *vmdq)
|
|
{
|
|
struct ixgbe_mc_addr *mta;
|
|
|
|
mta = (struct ixgbe_mc_addr *)*update_ptr;
|
|
*vmdq = mta->vmdq;
|
|
|
|
*update_ptr = (u8*)(mta + 1);
|
|
|
|
return (mta->addr);
|
|
} /* ixgbe_mc_array_itr */
|
|
|
|
/************************************************************************
|
|
* ixgbe_local_timer - Timer routine
|
|
*
|
|
* Checks for link status, updates statistics,
|
|
* and runs the watchdog check.
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_if_timer(if_ctx_t ctx, uint16_t qid)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
|
|
if (qid != 0)
|
|
return;
|
|
|
|
/* Check for pluggable optics */
|
|
if (adapter->sfp_probe)
|
|
if (!ixgbe_sfp_probe(ctx))
|
|
return; /* Nothing to do */
|
|
|
|
ixgbe_check_link(&adapter->hw, &adapter->link_speed,
|
|
&adapter->link_up, 0);
|
|
|
|
/* Fire off the adminq task */
|
|
iflib_admin_intr_deferred(ctx);
|
|
|
|
} /* ixgbe_if_timer */
|
|
|
|
/************************************************************************
|
|
* ixgbe_sfp_probe
|
|
*
|
|
* Determine if a port had optics inserted.
|
|
************************************************************************/
|
|
static bool
|
|
ixgbe_sfp_probe(if_ctx_t ctx)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
device_t dev = iflib_get_dev(ctx);
|
|
bool result = FALSE;
|
|
|
|
if ((hw->phy.type == ixgbe_phy_nl) &&
|
|
(hw->phy.sfp_type == ixgbe_sfp_type_not_present)) {
|
|
s32 ret = hw->phy.ops.identify_sfp(hw);
|
|
if (ret)
|
|
goto out;
|
|
ret = hw->phy.ops.reset(hw);
|
|
adapter->sfp_probe = FALSE;
|
|
if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
device_printf(dev, "Unsupported SFP+ module detected!");
|
|
device_printf(dev,
|
|
"Reload driver with supported module.\n");
|
|
goto out;
|
|
} else
|
|
device_printf(dev, "SFP+ module detected!\n");
|
|
/* We now have supported optics */
|
|
result = TRUE;
|
|
}
|
|
out:
|
|
|
|
return (result);
|
|
} /* ixgbe_sfp_probe */
|
|
|
|
/************************************************************************
|
|
* ixgbe_handle_mod - Tasklet for SFP module interrupts
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_handle_mod(void *context)
|
|
{
|
|
if_ctx_t ctx = context;
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
device_t dev = iflib_get_dev(ctx);
|
|
u32 err, cage_full = 0;
|
|
|
|
if (adapter->hw.need_crosstalk_fix) {
|
|
switch (hw->mac.type) {
|
|
case ixgbe_mac_82599EB:
|
|
cage_full = IXGBE_READ_REG(hw, IXGBE_ESDP) &
|
|
IXGBE_ESDP_SDP2;
|
|
break;
|
|
case ixgbe_mac_X550EM_x:
|
|
case ixgbe_mac_X550EM_a:
|
|
cage_full = IXGBE_READ_REG(hw, IXGBE_ESDP) &
|
|
IXGBE_ESDP_SDP0;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
if (!cage_full)
|
|
goto handle_mod_out;
|
|
}
|
|
|
|
err = hw->phy.ops.identify_sfp(hw);
|
|
if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
device_printf(dev,
|
|
"Unsupported SFP+ module type was detected.\n");
|
|
goto handle_mod_out;
|
|
}
|
|
|
|
if (hw->mac.type == ixgbe_mac_82598EB)
|
|
err = hw->phy.ops.reset(hw);
|
|
else
|
|
err = hw->mac.ops.setup_sfp(hw);
|
|
|
|
if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
device_printf(dev,
|
|
"Setup failure - unsupported SFP+ module type.\n");
|
|
goto handle_mod_out;
|
|
}
|
|
adapter->task_requests |= IXGBE_REQUEST_TASK_MSF;
|
|
return;
|
|
|
|
handle_mod_out:
|
|
adapter->task_requests &= ~(IXGBE_REQUEST_TASK_MSF);
|
|
} /* ixgbe_handle_mod */
|
|
|
|
|
|
/************************************************************************
|
|
* ixgbe_handle_msf - Tasklet for MSF (multispeed fiber) interrupts
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_handle_msf(void *context)
|
|
{
|
|
if_ctx_t ctx = context;
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 autoneg;
|
|
bool negotiate;
|
|
|
|
/* get_supported_phy_layer will call hw->phy.ops.identify_sfp() */
|
|
adapter->phy_layer = ixgbe_get_supported_physical_layer(hw);
|
|
|
|
autoneg = hw->phy.autoneg_advertised;
|
|
if ((!autoneg) && (hw->mac.ops.get_link_capabilities))
|
|
hw->mac.ops.get_link_capabilities(hw, &autoneg, &negotiate);
|
|
if (hw->mac.ops.setup_link)
|
|
hw->mac.ops.setup_link(hw, autoneg, TRUE);
|
|
|
|
/* Adjust media types shown in ifconfig */
|
|
ifmedia_removeall(adapter->media);
|
|
ixgbe_add_media_types(adapter->ctx);
|
|
ifmedia_set(adapter->media, IFM_ETHER | IFM_AUTO);
|
|
} /* ixgbe_handle_msf */
|
|
|
|
/************************************************************************
|
|
* ixgbe_handle_phy - Tasklet for external PHY interrupts
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_handle_phy(void *context)
|
|
{
|
|
if_ctx_t ctx = context;
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
int error;
|
|
|
|
error = hw->phy.ops.handle_lasi(hw);
|
|
if (error == IXGBE_ERR_OVERTEMP)
|
|
device_printf(adapter->dev, "CRITICAL: EXTERNAL PHY OVER TEMP!! PHY will downshift to lower power state!\n");
|
|
else if (error)
|
|
device_printf(adapter->dev,
|
|
"Error handling LASI interrupt: %d\n", error);
|
|
} /* ixgbe_handle_phy */
|
|
|
|
/************************************************************************
|
|
* ixgbe_if_stop - Stop the hardware
|
|
*
|
|
* Disables all traffic on the adapter by issuing a
|
|
* global reset on the MAC and deallocates TX/RX buffers.
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_if_stop(if_ctx_t ctx)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
INIT_DEBUGOUT("ixgbe_if_stop: begin\n");
|
|
|
|
ixgbe_reset_hw(hw);
|
|
hw->adapter_stopped = FALSE;
|
|
ixgbe_stop_adapter(hw);
|
|
if (hw->mac.type == ixgbe_mac_82599EB)
|
|
ixgbe_stop_mac_link_on_d3_82599(hw);
|
|
/* Turn off the laser - noop with no optics */
|
|
ixgbe_disable_tx_laser(hw);
|
|
|
|
/* Update the stack */
|
|
adapter->link_up = FALSE;
|
|
ixgbe_if_update_admin_status(ctx);
|
|
|
|
/* reprogram the RAR[0] in case user changed it. */
|
|
ixgbe_set_rar(&adapter->hw, 0, adapter->hw.mac.addr, 0, IXGBE_RAH_AV);
|
|
|
|
return;
|
|
} /* ixgbe_if_stop */
|
|
|
|
/************************************************************************
|
|
* ixgbe_update_link_status - Update OS on link state
|
|
*
|
|
* Note: Only updates the OS on the cached link state.
|
|
* The real check of the hardware only happens with
|
|
* a link interrupt.
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_if_update_admin_status(if_ctx_t ctx)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
device_t dev = iflib_get_dev(ctx);
|
|
|
|
if (adapter->link_up) {
|
|
if (adapter->link_active == FALSE) {
|
|
if (bootverbose)
|
|
device_printf(dev, "Link is up %d Gbps %s \n",
|
|
((adapter->link_speed == 128) ? 10 : 1),
|
|
"Full Duplex");
|
|
adapter->link_active = TRUE;
|
|
/* Update any Flow Control changes */
|
|
ixgbe_fc_enable(&adapter->hw);
|
|
/* Update DMA coalescing config */
|
|
ixgbe_config_dmac(adapter);
|
|
/* should actually be negotiated value */
|
|
iflib_link_state_change(ctx, LINK_STATE_UP, IF_Gbps(10));
|
|
|
|
if (adapter->feat_en & IXGBE_FEATURE_SRIOV)
|
|
ixgbe_ping_all_vfs(adapter);
|
|
}
|
|
} else { /* Link down */
|
|
if (adapter->link_active == TRUE) {
|
|
if (bootverbose)
|
|
device_printf(dev, "Link is Down\n");
|
|
iflib_link_state_change(ctx, LINK_STATE_DOWN, 0);
|
|
adapter->link_active = FALSE;
|
|
if (adapter->feat_en & IXGBE_FEATURE_SRIOV)
|
|
ixgbe_ping_all_vfs(adapter);
|
|
}
|
|
}
|
|
|
|
/* Handle task requests from msix_link() */
|
|
if (adapter->task_requests & IXGBE_REQUEST_TASK_MOD)
|
|
ixgbe_handle_mod(ctx);
|
|
if (adapter->task_requests & IXGBE_REQUEST_TASK_MSF)
|
|
ixgbe_handle_msf(ctx);
|
|
if (adapter->task_requests & IXGBE_REQUEST_TASK_MBX)
|
|
ixgbe_handle_mbx(ctx);
|
|
if (adapter->task_requests & IXGBE_REQUEST_TASK_FDIR)
|
|
ixgbe_reinit_fdir(ctx);
|
|
if (adapter->task_requests & IXGBE_REQUEST_TASK_PHY)
|
|
ixgbe_handle_phy(ctx);
|
|
adapter->task_requests = 0;
|
|
|
|
ixgbe_update_stats_counters(adapter);
|
|
} /* ixgbe_if_update_admin_status */
|
|
|
|
/************************************************************************
|
|
* ixgbe_config_dmac - Configure DMA Coalescing
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_config_dmac(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct ixgbe_dmac_config *dcfg = &hw->mac.dmac_config;
|
|
|
|
if (hw->mac.type < ixgbe_mac_X550 || !hw->mac.ops.dmac_config)
|
|
return;
|
|
|
|
if (dcfg->watchdog_timer ^ adapter->dmac ||
|
|
dcfg->link_speed ^ adapter->link_speed) {
|
|
dcfg->watchdog_timer = adapter->dmac;
|
|
dcfg->fcoe_en = FALSE;
|
|
dcfg->link_speed = adapter->link_speed;
|
|
dcfg->num_tcs = 1;
|
|
|
|
INIT_DEBUGOUT2("dmac settings: watchdog %d, link speed %d\n",
|
|
dcfg->watchdog_timer, dcfg->link_speed);
|
|
|
|
hw->mac.ops.dmac_config(hw);
|
|
}
|
|
} /* ixgbe_config_dmac */
|
|
|
|
/************************************************************************
|
|
* ixgbe_if_enable_intr
|
|
************************************************************************/
|
|
void
|
|
ixgbe_if_enable_intr(if_ctx_t ctx)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct ix_rx_queue *que = adapter->rx_queues;
|
|
u32 mask, fwsm;
|
|
|
|
mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE);
|
|
|
|
switch (adapter->hw.mac.type) {
|
|
case ixgbe_mac_82599EB:
|
|
mask |= IXGBE_EIMS_ECC;
|
|
/* Temperature sensor on some adapters */
|
|
mask |= IXGBE_EIMS_GPI_SDP0;
|
|
/* SFP+ (RX_LOS_N & MOD_ABS_N) */
|
|
mask |= IXGBE_EIMS_GPI_SDP1;
|
|
mask |= IXGBE_EIMS_GPI_SDP2;
|
|
break;
|
|
case ixgbe_mac_X540:
|
|
/* Detect if Thermal Sensor is enabled */
|
|
fwsm = IXGBE_READ_REG(hw, IXGBE_FWSM);
|
|
if (fwsm & IXGBE_FWSM_TS_ENABLED)
|
|
mask |= IXGBE_EIMS_TS;
|
|
mask |= IXGBE_EIMS_ECC;
|
|
break;
|
|
case ixgbe_mac_X550:
|
|
/* MAC thermal sensor is automatically enabled */
|
|
mask |= IXGBE_EIMS_TS;
|
|
mask |= IXGBE_EIMS_ECC;
|
|
break;
|
|
case ixgbe_mac_X550EM_x:
|
|
case ixgbe_mac_X550EM_a:
|
|
/* Some devices use SDP0 for important information */
|
|
if (hw->device_id == IXGBE_DEV_ID_X550EM_X_SFP ||
|
|
hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP ||
|
|
hw->device_id == IXGBE_DEV_ID_X550EM_A_SFP_N ||
|
|
hw->device_id == IXGBE_DEV_ID_X550EM_X_10G_T)
|
|
mask |= IXGBE_EIMS_GPI_SDP0_BY_MAC(hw);
|
|
if (hw->phy.type == ixgbe_phy_x550em_ext_t)
|
|
mask |= IXGBE_EICR_GPI_SDP0_X540;
|
|
mask |= IXGBE_EIMS_ECC;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Enable Fan Failure detection */
|
|
if (adapter->feat_en & IXGBE_FEATURE_FAN_FAIL)
|
|
mask |= IXGBE_EIMS_GPI_SDP1;
|
|
/* Enable SR-IOV */
|
|
if (adapter->feat_en & IXGBE_FEATURE_SRIOV)
|
|
mask |= IXGBE_EIMS_MAILBOX;
|
|
/* Enable Flow Director */
|
|
if (adapter->feat_en & IXGBE_FEATURE_FDIR)
|
|
mask |= IXGBE_EIMS_FLOW_DIR;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS, mask);
|
|
|
|
/* With MSI-X we use auto clear */
|
|
if (adapter->intr_type == IFLIB_INTR_MSIX) {
|
|
mask = IXGBE_EIMS_ENABLE_MASK;
|
|
/* Don't autoclear Link */
|
|
mask &= ~IXGBE_EIMS_OTHER;
|
|
mask &= ~IXGBE_EIMS_LSC;
|
|
if (adapter->feat_cap & IXGBE_FEATURE_SRIOV)
|
|
mask &= ~IXGBE_EIMS_MAILBOX;
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIAC, mask);
|
|
}
|
|
|
|
/*
|
|
* Now enable all queues, this is done separately to
|
|
* allow for handling the extended (beyond 32) MSI-X
|
|
* vectors that can be used by 82599
|
|
*/
|
|
for (int i = 0; i < adapter->num_rx_queues; i++, que++)
|
|
ixgbe_enable_queue(adapter, que->msix);
|
|
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
|
|
} /* ixgbe_if_enable_intr */
|
|
|
|
/************************************************************************
|
|
* ixgbe_disable_intr
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_if_disable_intr(if_ctx_t ctx)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
|
|
if (adapter->intr_type == IFLIB_INTR_MSIX)
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC, 0);
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0);
|
|
} else {
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFF0000);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(0), ~0);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), ~0);
|
|
}
|
|
IXGBE_WRITE_FLUSH(&adapter->hw);
|
|
|
|
} /* ixgbe_if_disable_intr */
|
|
|
|
/************************************************************************
|
|
* ixgbe_link_intr_enable
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_link_intr_enable(if_ctx_t ctx)
|
|
{
|
|
struct ixgbe_hw *hw = &((struct adapter *)iflib_get_softc(ctx))->hw;
|
|
|
|
/* Re-enable other interrupts */
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EIMS_OTHER | IXGBE_EIMS_LSC);
|
|
} /* ixgbe_link_intr_enable */
|
|
|
|
/************************************************************************
|
|
* ixgbe_if_rx_queue_intr_enable
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_if_rx_queue_intr_enable(if_ctx_t ctx, uint16_t rxqid)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
struct ix_rx_queue *que = &adapter->rx_queues[rxqid];
|
|
|
|
ixgbe_enable_queue(adapter, que->msix);
|
|
|
|
return (0);
|
|
} /* ixgbe_if_rx_queue_intr_enable */
|
|
|
|
/************************************************************************
|
|
* ixgbe_enable_queue
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_enable_queue(struct adapter *adapter, u32 vector)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u64 queue = 1ULL << vector;
|
|
u32 mask;
|
|
|
|
if (hw->mac.type == ixgbe_mac_82598EB) {
|
|
mask = (IXGBE_EIMS_RTX_QUEUE & queue);
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS, mask);
|
|
} else {
|
|
mask = (queue & 0xFFFFFFFF);
|
|
if (mask)
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(0), mask);
|
|
mask = (queue >> 32);
|
|
if (mask)
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(1), mask);
|
|
}
|
|
} /* ixgbe_enable_queue */
|
|
|
|
/************************************************************************
|
|
* ixgbe_disable_queue
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_disable_queue(struct adapter *adapter, u32 vector)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u64 queue = 1ULL << vector;
|
|
u32 mask;
|
|
|
|
if (hw->mac.type == ixgbe_mac_82598EB) {
|
|
mask = (IXGBE_EIMS_RTX_QUEUE & queue);
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMC, mask);
|
|
} else {
|
|
mask = (queue & 0xFFFFFFFF);
|
|
if (mask)
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(0), mask);
|
|
mask = (queue >> 32);
|
|
if (mask)
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(1), mask);
|
|
}
|
|
} /* ixgbe_disable_queue */
|
|
|
|
/************************************************************************
|
|
* ixgbe_intr - Legacy Interrupt Service Routine
|
|
************************************************************************/
|
|
int
|
|
ixgbe_intr(void *arg)
|
|
{
|
|
struct adapter *adapter = arg;
|
|
struct ix_rx_queue *que = adapter->rx_queues;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
if_ctx_t ctx = adapter->ctx;
|
|
u32 eicr, eicr_mask;
|
|
|
|
eicr = IXGBE_READ_REG(hw, IXGBE_EICR);
|
|
|
|
++que->irqs;
|
|
if (eicr == 0) {
|
|
ixgbe_if_enable_intr(ctx);
|
|
return (FILTER_HANDLED);
|
|
}
|
|
|
|
/* Check for fan failure */
|
|
if ((hw->device_id == IXGBE_DEV_ID_82598AT) &&
|
|
(eicr & IXGBE_EICR_GPI_SDP1)) {
|
|
device_printf(adapter->dev,
|
|
"\nCRITICAL: FAN FAILURE!! REPLACE IMMEDIATELY!!\n");
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EICR_GPI_SDP1_BY_MAC(hw));
|
|
}
|
|
|
|
/* Link status change */
|
|
if (eicr & IXGBE_EICR_LSC) {
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMC, IXGBE_EIMC_LSC);
|
|
iflib_admin_intr_deferred(ctx);
|
|
}
|
|
|
|
if (ixgbe_is_sfp(hw)) {
|
|
/* Pluggable optics-related interrupt */
|
|
if (hw->mac.type >= ixgbe_mac_X540)
|
|
eicr_mask = IXGBE_EICR_GPI_SDP0_X540;
|
|
else
|
|
eicr_mask = IXGBE_EICR_GPI_SDP2_BY_MAC(hw);
|
|
|
|
if (eicr & eicr_mask) {
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, eicr_mask);
|
|
adapter->task_requests |= IXGBE_REQUEST_TASK_MOD;
|
|
}
|
|
|
|
if ((hw->mac.type == ixgbe_mac_82599EB) &&
|
|
(eicr & IXGBE_EICR_GPI_SDP1_BY_MAC(hw))) {
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR,
|
|
IXGBE_EICR_GPI_SDP1_BY_MAC(hw));
|
|
adapter->task_requests |= IXGBE_REQUEST_TASK_MSF;
|
|
}
|
|
}
|
|
|
|
/* External PHY interrupt */
|
|
if ((hw->phy.type == ixgbe_phy_x550em_ext_t) &&
|
|
(eicr & IXGBE_EICR_GPI_SDP0_X540))
|
|
adapter->task_requests |= IXGBE_REQUEST_TASK_PHY;
|
|
|
|
return (FILTER_SCHEDULE_THREAD);
|
|
} /* ixgbe_intr */
|
|
|
|
/************************************************************************
|
|
* ixgbe_free_pci_resources
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_free_pci_resources(if_ctx_t ctx)
|
|
{
|
|
struct adapter *adapter = iflib_get_softc(ctx);
|
|
struct ix_rx_queue *que = adapter->rx_queues;
|
|
device_t dev = iflib_get_dev(ctx);
|
|
|
|
/* Release all MSI-X queue resources */
|
|
if (adapter->intr_type == IFLIB_INTR_MSIX)
|
|
iflib_irq_free(ctx, &adapter->irq);
|
|
|
|
if (que != NULL) {
|
|
for (int i = 0; i < adapter->num_rx_queues; i++, que++) {
|
|
iflib_irq_free(ctx, &que->que_irq);
|
|
}
|
|
}
|
|
|
|
if (adapter->pci_mem != NULL)
|
|
bus_release_resource(dev, SYS_RES_MEMORY,
|
|
rman_get_rid(adapter->pci_mem), adapter->pci_mem);
|
|
} /* ixgbe_free_pci_resources */
|
|
|
|
/************************************************************************
|
|
* ixgbe_sysctl_flowcntl
|
|
*
|
|
* SYSCTL wrapper around setting Flow Control
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_sysctl_flowcntl(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct adapter *adapter;
|
|
int error, fc;
|
|
|
|
adapter = (struct adapter *)arg1;
|
|
fc = adapter->hw.fc.current_mode;
|
|
|
|
error = sysctl_handle_int(oidp, &fc, 0, req);
|
|
if ((error) || (req->newptr == NULL))
|
|
return (error);
|
|
|
|
/* Don't bother if it's not changed */
|
|
if (fc == adapter->hw.fc.current_mode)
|
|
return (0);
|
|
|
|
return ixgbe_set_flowcntl(adapter, fc);
|
|
} /* ixgbe_sysctl_flowcntl */
|
|
|
|
/************************************************************************
|
|
* ixgbe_set_flowcntl - Set flow control
|
|
*
|
|
* Flow control values:
|
|
* 0 - off
|
|
* 1 - rx pause
|
|
* 2 - tx pause
|
|
* 3 - full
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_set_flowcntl(struct adapter *adapter, int fc)
|
|
{
|
|
switch (fc) {
|
|
case ixgbe_fc_rx_pause:
|
|
case ixgbe_fc_tx_pause:
|
|
case ixgbe_fc_full:
|
|
adapter->hw.fc.requested_mode = fc;
|
|
if (adapter->num_rx_queues > 1)
|
|
ixgbe_disable_rx_drop(adapter);
|
|
break;
|
|
case ixgbe_fc_none:
|
|
adapter->hw.fc.requested_mode = ixgbe_fc_none;
|
|
if (adapter->num_rx_queues > 1)
|
|
ixgbe_enable_rx_drop(adapter);
|
|
break;
|
|
default:
|
|
return (EINVAL);
|
|
}
|
|
|
|
/* Don't autoneg if forcing a value */
|
|
adapter->hw.fc.disable_fc_autoneg = TRUE;
|
|
ixgbe_fc_enable(&adapter->hw);
|
|
|
|
return (0);
|
|
} /* ixgbe_set_flowcntl */
|
|
|
|
/************************************************************************
|
|
* ixgbe_enable_rx_drop
|
|
*
|
|
* Enable the hardware to drop packets when the buffer is
|
|
* full. This is useful with multiqueue, so that no single
|
|
* queue being full stalls the entire RX engine. We only
|
|
* enable this when Multiqueue is enabled AND Flow Control
|
|
* is disabled.
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_enable_rx_drop(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct rx_ring *rxr;
|
|
u32 srrctl;
|
|
|
|
for (int i = 0; i < adapter->num_rx_queues; i++) {
|
|
rxr = &adapter->rx_queues[i].rxr;
|
|
srrctl = IXGBE_READ_REG(hw, IXGBE_SRRCTL(rxr->me));
|
|
srrctl |= IXGBE_SRRCTL_DROP_EN;
|
|
IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(rxr->me), srrctl);
|
|
}
|
|
|
|
/* enable drop for each vf */
|
|
for (int i = 0; i < adapter->num_vfs; i++) {
|
|
IXGBE_WRITE_REG(hw, IXGBE_QDE,
|
|
(IXGBE_QDE_WRITE | (i << IXGBE_QDE_IDX_SHIFT) |
|
|
IXGBE_QDE_ENABLE));
|
|
}
|
|
} /* ixgbe_enable_rx_drop */
|
|
|
|
/************************************************************************
|
|
* ixgbe_disable_rx_drop
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_disable_rx_drop(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct rx_ring *rxr;
|
|
u32 srrctl;
|
|
|
|
for (int i = 0; i < adapter->num_rx_queues; i++) {
|
|
rxr = &adapter->rx_queues[i].rxr;
|
|
srrctl = IXGBE_READ_REG(hw, IXGBE_SRRCTL(rxr->me));
|
|
srrctl &= ~IXGBE_SRRCTL_DROP_EN;
|
|
IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(rxr->me), srrctl);
|
|
}
|
|
|
|
/* disable drop for each vf */
|
|
for (int i = 0; i < adapter->num_vfs; i++) {
|
|
IXGBE_WRITE_REG(hw, IXGBE_QDE,
|
|
(IXGBE_QDE_WRITE | (i << IXGBE_QDE_IDX_SHIFT)));
|
|
}
|
|
} /* ixgbe_disable_rx_drop */
|
|
|
|
/************************************************************************
|
|
* ixgbe_sysctl_advertise
|
|
*
|
|
* SYSCTL wrapper around setting advertised speed
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_sysctl_advertise(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct adapter *adapter;
|
|
int error, advertise;
|
|
|
|
adapter = (struct adapter *)arg1;
|
|
advertise = adapter->advertise;
|
|
|
|
error = sysctl_handle_int(oidp, &advertise, 0, req);
|
|
if ((error) || (req->newptr == NULL))
|
|
return (error);
|
|
|
|
return ixgbe_set_advertise(adapter, advertise);
|
|
} /* ixgbe_sysctl_advertise */
|
|
|
|
/************************************************************************
|
|
* ixgbe_set_advertise - Control advertised link speed
|
|
*
|
|
* Flags:
|
|
* 0x1 - advertise 100 Mb
|
|
* 0x2 - advertise 1G
|
|
* 0x4 - advertise 10G
|
|
* 0x8 - advertise 10 Mb (yes, Mb)
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_set_advertise(struct adapter *adapter, int advertise)
|
|
{
|
|
device_t dev = iflib_get_dev(adapter->ctx);
|
|
struct ixgbe_hw *hw;
|
|
ixgbe_link_speed speed = 0;
|
|
ixgbe_link_speed link_caps = 0;
|
|
s32 err = IXGBE_NOT_IMPLEMENTED;
|
|
bool negotiate = FALSE;
|
|
|
|
/* Checks to validate new value */
|
|
if (adapter->advertise == advertise) /* no change */
|
|
return (0);
|
|
|
|
hw = &adapter->hw;
|
|
|
|
/* No speed changes for backplane media */
|
|
if (hw->phy.media_type == ixgbe_media_type_backplane)
|
|
return (ENODEV);
|
|
|
|
if (!((hw->phy.media_type == ixgbe_media_type_copper) ||
|
|
(hw->phy.multispeed_fiber))) {
|
|
device_printf(dev, "Advertised speed can only be set on copper or multispeed fiber media types.\n");
|
|
return (EINVAL);
|
|
}
|
|
|
|
if (advertise < 0x1 || advertise > 0xF) {
|
|
device_printf(dev, "Invalid advertised speed; valid modes are 0x1 through 0xF\n");
|
|
return (EINVAL);
|
|
}
|
|
|
|
if (hw->mac.ops.get_link_capabilities) {
|
|
err = hw->mac.ops.get_link_capabilities(hw, &link_caps,
|
|
&negotiate);
|
|
if (err != IXGBE_SUCCESS) {
|
|
device_printf(dev, "Unable to determine supported advertise speeds\n");
|
|
return (ENODEV);
|
|
}
|
|
}
|
|
|
|
/* Set new value and report new advertised mode */
|
|
if (advertise & 0x1) {
|
|
if (!(link_caps & IXGBE_LINK_SPEED_100_FULL)) {
|
|
device_printf(dev, "Interface does not support 100Mb advertised speed\n");
|
|
return (EINVAL);
|
|
}
|
|
speed |= IXGBE_LINK_SPEED_100_FULL;
|
|
}
|
|
if (advertise & 0x2) {
|
|
if (!(link_caps & IXGBE_LINK_SPEED_1GB_FULL)) {
|
|
device_printf(dev, "Interface does not support 1Gb advertised speed\n");
|
|
return (EINVAL);
|
|
}
|
|
speed |= IXGBE_LINK_SPEED_1GB_FULL;
|
|
}
|
|
if (advertise & 0x4) {
|
|
if (!(link_caps & IXGBE_LINK_SPEED_10GB_FULL)) {
|
|
device_printf(dev, "Interface does not support 10Gb advertised speed\n");
|
|
return (EINVAL);
|
|
}
|
|
speed |= IXGBE_LINK_SPEED_10GB_FULL;
|
|
}
|
|
if (advertise & 0x8) {
|
|
if (!(link_caps & IXGBE_LINK_SPEED_10_FULL)) {
|
|
device_printf(dev, "Interface does not support 10Mb advertised speed\n");
|
|
return (EINVAL);
|
|
}
|
|
speed |= IXGBE_LINK_SPEED_10_FULL;
|
|
}
|
|
|
|
hw->mac.autotry_restart = TRUE;
|
|
hw->mac.ops.setup_link(hw, speed, TRUE);
|
|
adapter->advertise = advertise;
|
|
|
|
return (0);
|
|
} /* ixgbe_set_advertise */
|
|
|
|
/************************************************************************
|
|
* ixgbe_get_advertise - Get current advertised speed settings
|
|
*
|
|
* Formatted for sysctl usage.
|
|
* Flags:
|
|
* 0x1 - advertise 100 Mb
|
|
* 0x2 - advertise 1G
|
|
* 0x4 - advertise 10G
|
|
* 0x8 - advertise 10 Mb (yes, Mb)
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_get_advertise(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
int speed;
|
|
ixgbe_link_speed link_caps = 0;
|
|
s32 err;
|
|
bool negotiate = FALSE;
|
|
|
|
/*
|
|
* Advertised speed means nothing unless it's copper or
|
|
* multi-speed fiber
|
|
*/
|
|
if (!(hw->phy.media_type == ixgbe_media_type_copper) &&
|
|
!(hw->phy.multispeed_fiber))
|
|
return (0);
|
|
|
|
err = hw->mac.ops.get_link_capabilities(hw, &link_caps, &negotiate);
|
|
if (err != IXGBE_SUCCESS)
|
|
return (0);
|
|
|
|
speed =
|
|
((link_caps & IXGBE_LINK_SPEED_10GB_FULL) ? 4 : 0) |
|
|
((link_caps & IXGBE_LINK_SPEED_1GB_FULL) ? 2 : 0) |
|
|
((link_caps & IXGBE_LINK_SPEED_100_FULL) ? 1 : 0) |
|
|
((link_caps & IXGBE_LINK_SPEED_10_FULL) ? 8 : 0);
|
|
|
|
return speed;
|
|
} /* ixgbe_get_advertise */
|
|
|
|
/************************************************************************
|
|
* ixgbe_sysctl_dmac - Manage DMA Coalescing
|
|
*
|
|
* Control values:
|
|
* 0/1 - off / on (use default value of 1000)
|
|
*
|
|
* Legal timer values are:
|
|
* 50,100,250,500,1000,2000,5000,10000
|
|
*
|
|
* Turning off interrupt moderation will also turn this off.
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_sysctl_dmac(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct adapter *adapter = (struct adapter *)arg1;
|
|
struct ifnet *ifp = iflib_get_ifp(adapter->ctx);
|
|
int error;
|
|
u16 newval;
|
|
|
|
newval = adapter->dmac;
|
|
error = sysctl_handle_16(oidp, &newval, 0, req);
|
|
if ((error) || (req->newptr == NULL))
|
|
return (error);
|
|
|
|
switch (newval) {
|
|
case 0:
|
|
/* Disabled */
|
|
adapter->dmac = 0;
|
|
break;
|
|
case 1:
|
|
/* Enable and use default */
|
|
adapter->dmac = 1000;
|
|
break;
|
|
case 50:
|
|
case 100:
|
|
case 250:
|
|
case 500:
|
|
case 1000:
|
|
case 2000:
|
|
case 5000:
|
|
case 10000:
|
|
/* Legal values - allow */
|
|
adapter->dmac = newval;
|
|
break;
|
|
default:
|
|
/* Do nothing, illegal value */
|
|
return (EINVAL);
|
|
}
|
|
|
|
/* Re-initialize hardware if it's already running */
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
ifp->if_init(ifp);
|
|
|
|
return (0);
|
|
} /* ixgbe_sysctl_dmac */
|
|
|
|
#ifdef IXGBE_DEBUG
|
|
/************************************************************************
|
|
* ixgbe_sysctl_power_state
|
|
*
|
|
* Sysctl to test power states
|
|
* Values:
|
|
* 0 - set device to D0
|
|
* 3 - set device to D3
|
|
* (none) - get current device power state
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_sysctl_power_state(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct adapter *adapter = (struct adapter *)arg1;
|
|
device_t dev = adapter->dev;
|
|
int curr_ps, new_ps, error = 0;
|
|
|
|
curr_ps = new_ps = pci_get_powerstate(dev);
|
|
|
|
error = sysctl_handle_int(oidp, &new_ps, 0, req);
|
|
if ((error) || (req->newptr == NULL))
|
|
return (error);
|
|
|
|
if (new_ps == curr_ps)
|
|
return (0);
|
|
|
|
if (new_ps == 3 && curr_ps == 0)
|
|
error = DEVICE_SUSPEND(dev);
|
|
else if (new_ps == 0 && curr_ps == 3)
|
|
error = DEVICE_RESUME(dev);
|
|
else
|
|
return (EINVAL);
|
|
|
|
device_printf(dev, "New state: %d\n", pci_get_powerstate(dev));
|
|
|
|
return (error);
|
|
} /* ixgbe_sysctl_power_state */
|
|
#endif
|
|
|
|
/************************************************************************
|
|
* ixgbe_sysctl_wol_enable
|
|
*
|
|
* Sysctl to enable/disable the WoL capability,
|
|
* if supported by the adapter.
|
|
*
|
|
* Values:
|
|
* 0 - disabled
|
|
* 1 - enabled
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_sysctl_wol_enable(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct adapter *adapter = (struct adapter *)arg1;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
int new_wol_enabled;
|
|
int error = 0;
|
|
|
|
new_wol_enabled = hw->wol_enabled;
|
|
error = sysctl_handle_int(oidp, &new_wol_enabled, 0, req);
|
|
if ((error) || (req->newptr == NULL))
|
|
return (error);
|
|
new_wol_enabled = !!(new_wol_enabled);
|
|
if (new_wol_enabled == hw->wol_enabled)
|
|
return (0);
|
|
|
|
if (new_wol_enabled > 0 && !adapter->wol_support)
|
|
return (ENODEV);
|
|
else
|
|
hw->wol_enabled = new_wol_enabled;
|
|
|
|
return (0);
|
|
} /* ixgbe_sysctl_wol_enable */
|
|
|
|
/************************************************************************
|
|
* ixgbe_sysctl_wufc - Wake Up Filter Control
|
|
*
|
|
* Sysctl to enable/disable the types of packets that the
|
|
* adapter will wake up on upon receipt.
|
|
* Flags:
|
|
* 0x1 - Link Status Change
|
|
* 0x2 - Magic Packet
|
|
* 0x4 - Direct Exact
|
|
* 0x8 - Directed Multicast
|
|
* 0x10 - Broadcast
|
|
* 0x20 - ARP/IPv4 Request Packet
|
|
* 0x40 - Direct IPv4 Packet
|
|
* 0x80 - Direct IPv6 Packet
|
|
*
|
|
* Settings not listed above will cause the sysctl to return an error.
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_sysctl_wufc(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct adapter *adapter = (struct adapter *)arg1;
|
|
int error = 0;
|
|
u32 new_wufc;
|
|
|
|
new_wufc = adapter->wufc;
|
|
|
|
error = sysctl_handle_32(oidp, &new_wufc, 0, req);
|
|
if ((error) || (req->newptr == NULL))
|
|
return (error);
|
|
if (new_wufc == adapter->wufc)
|
|
return (0);
|
|
|
|
if (new_wufc & 0xffffff00)
|
|
return (EINVAL);
|
|
|
|
new_wufc &= 0xff;
|
|
new_wufc |= (0xffffff & adapter->wufc);
|
|
adapter->wufc = new_wufc;
|
|
|
|
return (0);
|
|
} /* ixgbe_sysctl_wufc */
|
|
|
|
#ifdef IXGBE_DEBUG
|
|
/************************************************************************
|
|
* ixgbe_sysctl_print_rss_config
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_sysctl_print_rss_config(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct adapter *adapter = (struct adapter *)arg1;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
device_t dev = adapter->dev;
|
|
struct sbuf *buf;
|
|
int error = 0, reta_size;
|
|
u32 reg;
|
|
|
|
buf = sbuf_new_for_sysctl(NULL, NULL, 128, req);
|
|
if (!buf) {
|
|
device_printf(dev, "Could not allocate sbuf for output.\n");
|
|
return (ENOMEM);
|
|
}
|
|
|
|
// TODO: use sbufs to make a string to print out
|
|
/* Set multiplier for RETA setup and table size based on MAC */
|
|
switch (adapter->hw.mac.type) {
|
|
case ixgbe_mac_X550:
|
|
case ixgbe_mac_X550EM_x:
|
|
case ixgbe_mac_X550EM_a:
|
|
reta_size = 128;
|
|
break;
|
|
default:
|
|
reta_size = 32;
|
|
break;
|
|
}
|
|
|
|
/* Print out the redirection table */
|
|
sbuf_cat(buf, "\n");
|
|
for (int i = 0; i < reta_size; i++) {
|
|
if (i < 32) {
|
|
reg = IXGBE_READ_REG(hw, IXGBE_RETA(i));
|
|
sbuf_printf(buf, "RETA(%2d): 0x%08x\n", i, reg);
|
|
} else {
|
|
reg = IXGBE_READ_REG(hw, IXGBE_ERETA(i - 32));
|
|
sbuf_printf(buf, "ERETA(%2d): 0x%08x\n", i - 32, reg);
|
|
}
|
|
}
|
|
|
|
// TODO: print more config
|
|
|
|
error = sbuf_finish(buf);
|
|
if (error)
|
|
device_printf(dev, "Error finishing sbuf: %d\n", error);
|
|
|
|
sbuf_delete(buf);
|
|
|
|
return (0);
|
|
} /* ixgbe_sysctl_print_rss_config */
|
|
#endif /* IXGBE_DEBUG */
|
|
|
|
/************************************************************************
|
|
* ixgbe_sysctl_phy_temp - Retrieve temperature of PHY
|
|
*
|
|
* For X552/X557-AT devices using an external PHY
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_sysctl_phy_temp(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct adapter *adapter = (struct adapter *)arg1;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u16 reg;
|
|
|
|
if (hw->device_id != IXGBE_DEV_ID_X550EM_X_10G_T) {
|
|
device_printf(iflib_get_dev(adapter->ctx),
|
|
"Device has no supported external thermal sensor.\n");
|
|
return (ENODEV);
|
|
}
|
|
|
|
if (hw->phy.ops.read_reg(hw, IXGBE_PHY_CURRENT_TEMP,
|
|
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, ®)) {
|
|
device_printf(iflib_get_dev(adapter->ctx),
|
|
"Error reading from PHY's current temperature register\n");
|
|
return (EAGAIN);
|
|
}
|
|
|
|
/* Shift temp for output */
|
|
reg = reg >> 8;
|
|
|
|
return (sysctl_handle_16(oidp, NULL, reg, req));
|
|
} /* ixgbe_sysctl_phy_temp */
|
|
|
|
/************************************************************************
|
|
* ixgbe_sysctl_phy_overtemp_occurred
|
|
*
|
|
* Reports (directly from the PHY) whether the current PHY
|
|
* temperature is over the overtemp threshold.
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_sysctl_phy_overtemp_occurred(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct adapter *adapter = (struct adapter *)arg1;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u16 reg;
|
|
|
|
if (hw->device_id != IXGBE_DEV_ID_X550EM_X_10G_T) {
|
|
device_printf(iflib_get_dev(adapter->ctx),
|
|
"Device has no supported external thermal sensor.\n");
|
|
return (ENODEV);
|
|
}
|
|
|
|
if (hw->phy.ops.read_reg(hw, IXGBE_PHY_OVERTEMP_STATUS,
|
|
IXGBE_MDIO_VENDOR_SPECIFIC_1_DEV_TYPE, ®)) {
|
|
device_printf(iflib_get_dev(adapter->ctx),
|
|
"Error reading from PHY's temperature status register\n");
|
|
return (EAGAIN);
|
|
}
|
|
|
|
/* Get occurrence bit */
|
|
reg = !!(reg & 0x4000);
|
|
|
|
return (sysctl_handle_16(oidp, 0, reg, req));
|
|
} /* ixgbe_sysctl_phy_overtemp_occurred */
|
|
|
|
/************************************************************************
|
|
* ixgbe_sysctl_eee_state
|
|
*
|
|
* Sysctl to set EEE power saving feature
|
|
* Values:
|
|
* 0 - disable EEE
|
|
* 1 - enable EEE
|
|
* (none) - get current device EEE state
|
|
************************************************************************/
|
|
static int
|
|
ixgbe_sysctl_eee_state(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
struct adapter *adapter = (struct adapter *)arg1;
|
|
device_t dev = adapter->dev;
|
|
struct ifnet *ifp = iflib_get_ifp(adapter->ctx);
|
|
int curr_eee, new_eee, error = 0;
|
|
s32 retval;
|
|
|
|
curr_eee = new_eee = !!(adapter->feat_en & IXGBE_FEATURE_EEE);
|
|
|
|
error = sysctl_handle_int(oidp, &new_eee, 0, req);
|
|
if ((error) || (req->newptr == NULL))
|
|
return (error);
|
|
|
|
/* Nothing to do */
|
|
if (new_eee == curr_eee)
|
|
return (0);
|
|
|
|
/* Not supported */
|
|
if (!(adapter->feat_cap & IXGBE_FEATURE_EEE))
|
|
return (EINVAL);
|
|
|
|
/* Bounds checking */
|
|
if ((new_eee < 0) || (new_eee > 1))
|
|
return (EINVAL);
|
|
|
|
retval = ixgbe_setup_eee(&adapter->hw, new_eee);
|
|
if (retval) {
|
|
device_printf(dev, "Error in EEE setup: 0x%08X\n", retval);
|
|
return (EINVAL);
|
|
}
|
|
|
|
/* Restart auto-neg */
|
|
ifp->if_init(ifp);
|
|
|
|
device_printf(dev, "New EEE state: %d\n", new_eee);
|
|
|
|
/* Cache new value */
|
|
if (new_eee)
|
|
adapter->feat_en |= IXGBE_FEATURE_EEE;
|
|
else
|
|
adapter->feat_en &= ~IXGBE_FEATURE_EEE;
|
|
|
|
return (error);
|
|
} /* ixgbe_sysctl_eee_state */
|
|
|
|
/************************************************************************
|
|
* ixgbe_init_device_features
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_init_device_features(struct adapter *adapter)
|
|
{
|
|
adapter->feat_cap = IXGBE_FEATURE_NETMAP
|
|
| IXGBE_FEATURE_RSS
|
|
| IXGBE_FEATURE_MSI
|
|
| IXGBE_FEATURE_MSIX
|
|
| IXGBE_FEATURE_LEGACY_IRQ;
|
|
|
|
/* Set capabilities first... */
|
|
switch (adapter->hw.mac.type) {
|
|
case ixgbe_mac_82598EB:
|
|
if (adapter->hw.device_id == IXGBE_DEV_ID_82598AT)
|
|
adapter->feat_cap |= IXGBE_FEATURE_FAN_FAIL;
|
|
break;
|
|
case ixgbe_mac_X540:
|
|
adapter->feat_cap |= IXGBE_FEATURE_SRIOV;
|
|
adapter->feat_cap |= IXGBE_FEATURE_FDIR;
|
|
if ((adapter->hw.device_id == IXGBE_DEV_ID_X540_BYPASS) &&
|
|
(adapter->hw.bus.func == 0))
|
|
adapter->feat_cap |= IXGBE_FEATURE_BYPASS;
|
|
break;
|
|
case ixgbe_mac_X550:
|
|
adapter->feat_cap |= IXGBE_FEATURE_TEMP_SENSOR;
|
|
adapter->feat_cap |= IXGBE_FEATURE_SRIOV;
|
|
adapter->feat_cap |= IXGBE_FEATURE_FDIR;
|
|
break;
|
|
case ixgbe_mac_X550EM_x:
|
|
adapter->feat_cap |= IXGBE_FEATURE_SRIOV;
|
|
adapter->feat_cap |= IXGBE_FEATURE_FDIR;
|
|
break;
|
|
case ixgbe_mac_X550EM_a:
|
|
adapter->feat_cap |= IXGBE_FEATURE_SRIOV;
|
|
adapter->feat_cap |= IXGBE_FEATURE_FDIR;
|
|
adapter->feat_cap &= ~IXGBE_FEATURE_LEGACY_IRQ;
|
|
if ((adapter->hw.device_id == IXGBE_DEV_ID_X550EM_A_1G_T) ||
|
|
(adapter->hw.device_id == IXGBE_DEV_ID_X550EM_A_1G_T_L)) {
|
|
adapter->feat_cap |= IXGBE_FEATURE_TEMP_SENSOR;
|
|
adapter->feat_cap |= IXGBE_FEATURE_EEE;
|
|
}
|
|
break;
|
|
case ixgbe_mac_82599EB:
|
|
adapter->feat_cap |= IXGBE_FEATURE_SRIOV;
|
|
adapter->feat_cap |= IXGBE_FEATURE_FDIR;
|
|
if ((adapter->hw.device_id == IXGBE_DEV_ID_82599_BYPASS) &&
|
|
(adapter->hw.bus.func == 0))
|
|
adapter->feat_cap |= IXGBE_FEATURE_BYPASS;
|
|
if (adapter->hw.device_id == IXGBE_DEV_ID_82599_QSFP_SF_QP)
|
|
adapter->feat_cap &= ~IXGBE_FEATURE_LEGACY_IRQ;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* Enabled by default... */
|
|
/* Fan failure detection */
|
|
if (adapter->feat_cap & IXGBE_FEATURE_FAN_FAIL)
|
|
adapter->feat_en |= IXGBE_FEATURE_FAN_FAIL;
|
|
/* Netmap */
|
|
if (adapter->feat_cap & IXGBE_FEATURE_NETMAP)
|
|
adapter->feat_en |= IXGBE_FEATURE_NETMAP;
|
|
/* EEE */
|
|
if (adapter->feat_cap & IXGBE_FEATURE_EEE)
|
|
adapter->feat_en |= IXGBE_FEATURE_EEE;
|
|
/* Thermal Sensor */
|
|
if (adapter->feat_cap & IXGBE_FEATURE_TEMP_SENSOR)
|
|
adapter->feat_en |= IXGBE_FEATURE_TEMP_SENSOR;
|
|
|
|
/* Enabled via global sysctl... */
|
|
/* Flow Director */
|
|
if (ixgbe_enable_fdir) {
|
|
if (adapter->feat_cap & IXGBE_FEATURE_FDIR)
|
|
adapter->feat_en |= IXGBE_FEATURE_FDIR;
|
|
else
|
|
device_printf(adapter->dev, "Device does not support Flow Director. Leaving disabled.");
|
|
}
|
|
/*
|
|
* Message Signal Interrupts - Extended (MSI-X)
|
|
* Normal MSI is only enabled if MSI-X calls fail.
|
|
*/
|
|
if (!ixgbe_enable_msix)
|
|
adapter->feat_cap &= ~IXGBE_FEATURE_MSIX;
|
|
/* Receive-Side Scaling (RSS) */
|
|
if ((adapter->feat_cap & IXGBE_FEATURE_RSS) && ixgbe_enable_rss)
|
|
adapter->feat_en |= IXGBE_FEATURE_RSS;
|
|
|
|
/* Disable features with unmet dependencies... */
|
|
/* No MSI-X */
|
|
if (!(adapter->feat_cap & IXGBE_FEATURE_MSIX)) {
|
|
adapter->feat_cap &= ~IXGBE_FEATURE_RSS;
|
|
adapter->feat_cap &= ~IXGBE_FEATURE_SRIOV;
|
|
adapter->feat_en &= ~IXGBE_FEATURE_RSS;
|
|
adapter->feat_en &= ~IXGBE_FEATURE_SRIOV;
|
|
}
|
|
} /* ixgbe_init_device_features */
|
|
|
|
/************************************************************************
|
|
* ixgbe_check_fan_failure
|
|
************************************************************************/
|
|
static void
|
|
ixgbe_check_fan_failure(struct adapter *adapter, u32 reg, bool in_interrupt)
|
|
{
|
|
u32 mask;
|
|
|
|
mask = (in_interrupt) ? IXGBE_EICR_GPI_SDP1_BY_MAC(&adapter->hw) :
|
|
IXGBE_ESDP_SDP1;
|
|
|
|
if (reg & mask)
|
|
device_printf(adapter->dev, "\nCRITICAL: FAN FAILURE!! REPLACE IMMEDIATELY!!\n");
|
|
} /* ixgbe_check_fan_failure */
|