freebsd-skq/sys/dev/bwi/if_bwireg.h
imp be2697239d Correct types of PHY, per http://bcm-specs.sipsolutions.net/PHYVersioning
# Note: The driver doesn't support either these PHY types, so this is
# effectively a nop.

Submitted by:	"ddk"
Obtained from:	http://paradox.lissyara.su/bwi.diff
2009-05-18 01:07:38 +00:00

498 lines
16 KiB
C

/*
* Copyright (c) 2007 The DragonFly Project. All rights reserved.
*
* This code is derived from software contributed to The DragonFly Project
* by Sepherosa Ziehau <sepherosa@gmail.com>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* 3. Neither the name of The DragonFly Project nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific, prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
* FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
* COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES (INCLUDING,
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT
* OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $DragonFly: src/sys/dev/netif/bwi/if_bwireg.h,v 1.4 2007/10/19 14:27:04 sephe Exp $
* $FreeBSD$
*/
#ifndef _IF_BWIREG_H
#define _IF_BWIREG_H
/*
* Registers for all of the register windows
*/
#define BWI_FLAGS 0xf18
#define BWI_FLAGS_INTR_MASK __BITS(5, 0)
#define BWI_IMSTATE 0xf90
#define BWI_IMSTATE_INBAND_ERR __BIT(17)
#define BWI_IMSTATE_TIMEOUT __BIT(18)
#define BWI_INTRVEC 0xf94
#define BWI_STATE_LO 0xf98
#define BWI_STATE_LO_RESET __BIT(0)
#define BWI_STATE_LO_DISABLE1 __BIT(1)
#define BWI_STATE_LO_DISABLE2 __BIT(2)
#define BWI_STATE_LO_CLOCK __BIT(16)
#define BWI_STATE_LO_GATED_CLOCK __BIT(17)
#define BWI_STATE_LO_FLAG_PHYCLKEN __BIT(0)
#define BWI_STATE_LO_FLAG_PHYRST __BIT(1)
#define BWI_STATE_LO_FLAG_PHYLNK __BIT(11)
#define BWI_STATE_LO_FLAGS_MASK __BITS(29, 18)
#define BWI_STATE_HI 0xf9c
#define BWI_STATE_HI_SERROR __BIT(0)
#define BWI_STATE_HI_BUSY __BIT(2)
#define BWI_STATE_HI_FLAG_MAGIC1 0x1
#define BWI_STATE_HI_FLAG_MAGIC2 0x2
#define BWI_STATE_HI_FLAG_64BIT 0x1000
#define BWI_STATE_HI_FLAGS_MASK __BITS(28, 16)
#define BWI_CONF_LO 0xfa8
#define BWI_CONF_LO_SERVTO_MASK __BITS(2, 0) /* service timeout */
#define BWI_CONF_LO_SERVTO 2
#define BWI_CONF_LO_REQTO_MASK __BITS(6, 4) /* request timeout */
#define BWI_CONF_LO_REQTO 3
#define BWI_ID_LO 0xff8
#define BWI_ID_LO_BUSREV_MASK __BITS(31, 28)
/* Bus revision */
#define BWI_BUSREV_0 0
#define BWI_BUSREV_1 1
#define BWI_ID_HI 0xffc
#define BWI_ID_HI_REGWIN_REV(v) (((v) & 0xf) | (((v) & 0x7000) >> 8))
#define BWI_ID_HI_REGWIN_TYPE(v) (((v) & 0x8ff0) >> 4)
#define BWI_ID_HI_REGWIN_VENDOR_MASK __BITS(31, 16)
/*
* Registers for common register window
*/
#define BWI_INFO 0x0
#define BWI_INFO_BBPID_MASK __BITS(15, 0)
#define BWI_INFO_BBPREV_MASK __BITS(19, 16)
#define BWI_INFO_BBPPKG_MASK __BITS(23, 20)
#define BWI_INFO_NREGWIN_MASK __BITS(27, 24)
#define BWI_CAPABILITY 0x4
#define BWI_CAP_CLKMODE __BIT(18)
#define BWI_CONTROL 0x28
#define BWI_CONTROL_MAGIC0 0x3a4
#define BWI_CONTROL_MAGIC1 0xa4
#define BWI_PLL_ON_DELAY 0xb0
#define BWI_FREQ_SEL_DELAY 0xb4
#define BWI_CLOCK_CTRL 0xb8
#define BWI_CLOCK_CTRL_CLKSRC __BITS(2, 0)
#define BWI_CLOCK_CTRL_SLOW __BIT(11)
#define BWI_CLOCK_CTRL_IGNPLL __BIT(12)
#define BWI_CLOCK_CTRL_NODYN __BIT(13)
#define BWI_CLOCK_CTRL_FDIV __BITS(31, 16) /* freq divisor */
/* Possible values for BWI_CLOCK_CTRL_CLKSRC */
#define BWI_CLKSRC_LP_OSC 0 /* Low power oscillator */
#define BWI_CLKSRC_CS_OSC 1 /* Crystal oscillator */
#define BWI_CLKSRC_PCI 2
#define BWI_CLKSRC_MAX 3 /* Maximum of clock source */
/* Min/Max frequency for given clock source */
#define BWI_CLKSRC_LP_OSC_FMIN 25000
#define BWI_CLKSRC_LP_OSC_FMAX 43000
#define BWI_CLKSRC_CS_OSC_FMIN 19800000
#define BWI_CLKSRC_CS_OSC_FMAX 20200000
#define BWI_CLKSRC_PCI_FMIN 25000000
#define BWI_CLKSRC_PCI_FMAX 34000000
#define BWI_CLOCK_INFO 0xc0
#define BWI_CLOCK_INFO_FDIV __BITS(31, 16) /* freq divisor */
/*
* Registers for bus register window
*/
#define BWI_BUS_ADDR 0x50
#define BWI_BUS_ADDR_MAGIC 0xfd8
#define BWI_BUS_DATA 0x54
#define BWI_BUS_CONFIG 0x108
#define BWI_BUS_CONFIG_PREFETCH __BIT(2)
#define BWI_BUS_CONFIG_BURST __BIT(3)
#define BWI_BUS_CONFIG_MRM __BIT(5)
/*
* Register for MAC
*/
#define BWI_TXRX_INTR_STATUS_BASE 0x20
#define BWI_TXRX_INTR_MASK_BASE 0x24
#define BWI_TXRX_INTR_STATUS(i) (BWI_TXRX_INTR_STATUS_BASE + ((i) * 8))
#define BWI_TXRX_INTR_MASK(i) (BWI_TXRX_INTR_MASK_BASE + ((i) * 8))
#define BWI_MAC_STATUS 0x120
#define BWI_MAC_STATUS_ENABLE __BIT(0)
#define BWI_MAC_STATUS_UCODE_START __BIT(1)
#define BWI_MAC_STATUS_UCODE_JUMP0 __BIT(2)
#define BWI_MAC_STATUS_IHREN __BIT(10)
#define BWI_MAC_STATUS_GPOSEL_MASK __BITS(15, 14)
#define BWI_MAC_STATUS_BSWAP __BIT(16)
#define BWI_MAC_STATUS_INFRA __BIT(17)
#define BWI_MAC_STATUS_OPMODE_HOSTAP __BIT(18)
#define BWI_MAC_STATUS_RFLOCK __BIT(19)
#define BWI_MAC_STATUS_PASS_BCN __BIT(20)
#define BWI_MAC_STATUS_PASS_BADPLCP __BIT(21)
#define BWI_MAC_STATUS_PASS_CTL __BIT(22)
#define BWI_MAC_STATUS_PASS_BADFCS __BIT(23)
#define BWI_MAC_STATUS_PROMISC __BIT(24)
#define BWI_MAC_STATUS_HW_PS __BIT(25)
#define BWI_MAC_STATUS_WAKEUP __BIT(26)
#define BWI_MAC_STATUS_PHYLNK __BIT(31)
#define BWI_MAC_INTR_STATUS 0x128
#define BWI_MAC_INTR_MASK 0x12c
#define BWI_MAC_TMPLT_CTRL 0x130
#define BWI_MAC_TMPLT_DATA 0x134
#define BWI_MAC_PS_STATUS 0x140
#define BWI_MOBJ_CTRL 0x160
#define BWI_MOBJ_CTRL_VAL(objid, ofs) ((objid) << 16 | (ofs))
#define BWI_MOBJ_DATA 0x164
#define BWI_MOBJ_DATA_UNALIGN 0x166
/*
* Memory object IDs
*/
#define BWI_WR_MOBJ_AUTOINC 0x100 /* Auto-increment wr */
#define BWI_RD_MOBJ_AUTOINC 0x200 /* Auto-increment rd */
/* Firmware ucode object */
#define BWI_FW_UCODE_MOBJ 0x0
/* Common object */
#define BWI_COMM_MOBJ 0x1
#define BWI_COMM_MOBJ_FWREV 0x0
#define BWI_COMM_MOBJ_FWPATCHLV 0x2
#define BWI_COMM_MOBJ_SLOTTIME 0x10
#define BWI_COMM_MOBJ_MACREV 0x16
#define BWI_COMM_MOBJ_TX_ACK 0x22
#define BWI_COMM_MOBJ_UCODE_STATE 0x40
#define BWI_COMM_MOBJ_SHRETRY_FB 0x44
#define BWI_COMM_MOBJ_LGRETEY_FB 0x46
#define BWI_COMM_MOBJ_TX_BEACON 0x54
#define BWI_COMM_MOBJ_KEYTABLE_OFS 0x56
#define BWI_COMM_MOBJ_TSSI_DS 0x58
#define BWI_COMM_MOBJ_HFLAGS_LO 0x5e
#define BWI_COMM_MOBJ_HFLAGS_MI 0x60
#define BWI_COMM_MOBJ_HFLAGS_HI 0x62
#define BWI_COMM_MOBJ_RF_ATTEN 0x64
#define BWI_COMM_MOBJ_RF_NOISE 0x6e
#define BWI_COMM_MOBJ_TSSI_OFDM 0x70
#define BWI_COMM_MOBJ_PROBE_RESP_TO 0x74
#define BWI_COMM_MOBJ_CHAN 0xa0
#define BWI_COMM_MOBJ_KEY_ALGO 0x100
#define BWI_COMM_MOBJ_TX_PROBE_RESP 0x188
#define BWI_HFLAG_AUTO_ANTDIV 0x1ULL
#define BWI_HFLAG_SYM_WA 0x2ULL /* ??? SYM work around */
#define BWI_HFLAG_PWR_BOOST_DS 0x8ULL
#define BWI_HFLAG_GDC_WA 0x20ULL /* ??? GDC work around */
#define BWI_HFLAG_OFDM_PA 0x40ULL
#define BWI_HFLAG_NOT_JAPAN 0x80ULL
#define BWI_HFLAG_MAGIC1 0x200ULL
#define BWI_UCODE_STATE_PS 4
#define BWI_LO_TSSI_MASK __BITS(7, 0)
#define BWI_HI_TSSI_MASK __BITS(15, 8)
#define BWI_INVALID_TSSI 0x7f
/* 802.11 object */
#define BWI_80211_MOBJ 0x2
#define BWI_80211_MOBJ_CWMIN 0xc
#define BWI_80211_MOBJ_CWMAX 0x10
#define BWI_80211_MOBJ_SHRETRY 0x18
#define BWI_80211_MOBJ_LGRETRY 0x1c
/* Firmware PCM object */
#define BWI_FW_PCM_MOBJ 0x3
/* MAC address of pairwise keys */
#define BWI_PKEY_ADDR_MOBJ 0x4
#define BWI_TXSTATUS0 0x170
#define BWI_TXSTATUS0_VALID __BIT(0)
#define BWI_TXSTATUS0_ACKED __BIT(1)
#define BWI_TXSTATUS0_FREASON_MASK __BITS(4, 2) /* Failure reason */
#define BWI_TXSTATUS0_AMPDU __BIT(5)
#define BWI_TXSTATUS0_PENDING __BIT(6)
#define BWI_TXSTATUS0_PM __BIT(7)
#define BWI_TXSTATUS0_RTS_TXCNT_MASK __BITS(11, 8)
#define BWI_TXSTATUS0_DATA_TXCNT_MASK __BITS(15, 12)
#define BWI_TXSTATUS0_TXID_MASK __BITS(31, 16)
#define BWI_TXSTATUS1 0x174
#define BWI_TXRX_CTRL_BASE 0x200
#define BWI_TX32_CTRL 0x0
#define BWI_TX32_RINGINFO 0x4
#define BWI_TX32_INDEX 0x8
#define BWI_TX32_STATUS 0xc
#define BWI_TX32_STATUS_STATE_MASK __BITS(15, 12)
#define BWI_TX32_STATUS_STATE_DISABLED 0
#define BWI_TX32_STATUS_STATE_IDLE 2
#define BWI_TX32_STATUS_STATE_STOPPED 3
#define BWI_RX32_CTRL 0x10
#define BWI_RX32_CTRL_HDRSZ_MASK __BITS(7, 1)
#define BWI_RX32_RINGINFO 0x14
#define BWI_RX32_INDEX 0x18
#define BWI_RX32_STATUS 0x1c
#define BWI_RX32_STATUS_INDEX_MASK __BITS(11, 0)
#define BWI_RX32_STATUS_STATE_MASK __BITS(15, 12)
#define BWI_RX32_STATUS_STATE_DISABLED 0
/* Shared by 32bit TX/RX CTRL */
#define BWI_TXRX32_CTRL_ENABLE __BIT(0)
#define BWI_TXRX32_CTRL_ADDRHI_MASK __BITS(17, 16)
/* Shared by 32bit TX/RX RINGINFO */
#define BWI_TXRX32_RINGINFO_FUNC_TXRX 0x1
#define BWI_TXRX32_RINGINFO_FUNC_MASK __BITS(31, 30)
#define BWI_TXRX32_RINGINFO_ADDR_MASK __BITS(29, 0)
#define BWI_PHYINFO 0x3e0
#define BWI_PHYINFO_REV_MASK __BITS(3, 0)
#define BWI_PHYINFO_TYPE_MASK __BITS(11, 8)
#define BWI_PHYINFO_TYPE_11A 0
#define BWI_PHYINFO_TYPE_11B 1
#define BWI_PHYINFO_TYPE_11G 2
#define BWI_PHYINFO_TYPE_11N 4
#define BWI_PHYINFO_TYPE_11LP 5
#define BWI_PHYINFO_VER_MASK __BITS(15, 12)
#define BWI_RF_ANTDIV 0x3e2 /* Antenna Diversity?? */
#define BWI_PHY_MAGIC_REG1 0x3e4
#define BWI_PHY_MAGIC_REG1_VAL1 0x3000
#define BWI_PHY_MAGIC_REG1_VAL2 0x9
#define BWI_BBP_ATTEN 0x3e6
#define BWI_BBP_ATTEN_MAGIC 0xf4
#define BWI_BBP_ATTEN_MAGIC2 0x8140
#define BWI_BPHY_CTRL 0x3ec
#define BWI_BPHY_CTRL_INIT 0x3f22
#define BWI_RF_CHAN 0x3f0
#define BWI_RF_CHAN_EX 0x3f4
#define BWI_RF_CTRL 0x3f6
/* Register values for BWI_RF_CTRL */
#define BWI_RF_CTRL_RFINFO 0x1
/* XXX extra bits for reading from radio */
#define BWI_RF_CTRL_RD_11A 0x40
#define BWI_RF_CTRL_RD_11BG 0x80
#define BWI_RF_DATA_HI 0x3f8
#define BWI_RF_DATA_LO 0x3fa
/* Values read from BWI_RF_DATA_{HI,LO} after BWI_RF_CTRL_RFINFO */
#define BWI_RFINFO_MANUFACT_MASK __BITS(11, 0)
#define BWI_RF_MANUFACT_BCM 0x17f /* XXX */
#define BWI_RFINFO_TYPE_MASK __BITS(27, 12)
#define BWI_RF_T_BCM2050 0x2050
#define BWI_RF_T_BCM2053 0x2053
#define BWI_RF_T_BCM2060 0x2060
#define BWI_RFINFO_REV_MASK __BITS(31, 28)
#define BWI_PHY_CTRL 0x3fc
#define BWI_PHY_DATA 0x3fe
#define BWI_ADDR_FILTER_CTRL 0x420
#define BWI_ADDR_FILTER_CTRL_SET 0x20
#define BWI_ADDR_FILTER_MYADDR 0
#define BWI_ADDR_FILTER_BSSID 3
#define BWI_ADDR_FILTER_DATA 0x422
#define BWI_MAC_GPIO_CTRL 0x49c
#define BWI_MAC_GPIO_MASK 0x49e
#define BWI_MAC_PRE_TBTT 0x612
#define BWI_MAC_SLOTTIME 0x684
#define BWI_MAC_SLOTTIME_ADJUST 510
#define BWI_MAC_POWERUP_DELAY 0x6a8
/*
* Special registers
*/
/*
* GPIO control
* If common regwin exists, then it is within common regwin,
* else it is in bus regwin.
*/
#define BWI_GPIO_CTRL 0x6c
#define PCI_VENDOR_BROADCOM 0x14e4 /* Broadcom */
#define PCI_PRODUCT_BROADCOM_BCM4309 0x4324
/*
* Extended PCI registers
*/
#define BWI_PCIR_BAR PCIR_BAR(0)
#define BWI_PCIR_SEL_REGWIN 0x80
/* Register value for BWI_PCIR_SEL_REGWIN */
#define BWI_PCIM_REGWIN(id) (((id) * 0x1000) + 0x18000000)
#define BWI_PCIR_GPIO_IN 0xb0
#define BWI_PCIR_GPIO_OUT 0xb4
#define BWI_PCIM_GPIO_OUT_CLKSRC __BIT(4)
#define BWI_PCIR_GPIO_ENABLE 0xb8
/* Register values for BWI_PCIR_GPIO_{IN,OUT,ENABLE} */
#define BWI_PCIM_GPIO_PWR_ON __BIT(6)
#define BWI_PCIM_GPIO_PLL_PWR_OFF __BIT(7)
#define BWI_PCIR_INTCTL 0x94
/*
* PCI subdevice IDs
*/
#define BWI_PCI_SUBDEVICE_BU4306 0x416
#define BWI_PCI_SUBDEVICE_BCM4309G 0x421
#define BWI_IS_BRCM_BU4306(sc) \
((sc)->sc_pci_subvid == PCI_VENDOR_BROADCOM && \
(sc)->sc_pci_subdid == BWI_PCI_SUBDEVICE_BU4306)
#define BWI_IS_BRCM_BCM4309G(sc) \
((sc)->sc_pci_subvid == PCI_VENDOR_BROADCOM && \
(sc)->sc_pci_subdid == BWI_PCI_SUBDEVICE_BCM4309G)
/*
* EEPROM start address
*/
#define BWI_SPROM_START 0x1000
#define BWI_SPROM_11BG_EADDR 0x48
#define BWI_SPROM_11A_EADDR 0x54
#define BWI_SPROM_CARD_INFO 0x5c
#define BWI_SPROM_CARD_INFO_LOCALE __BITS(11, 8)
#define BWI_SPROM_LOCALE_JAPAN 5
#define BWI_SPROM_PA_PARAM_11BG 0x5e
#define BWI_SPROM_GPIO01 0x64
#define BWI_SPROM_GPIO_0 __BITS(7, 0)
#define BWI_SPROM_GPIO_1 __BITS(15, 8)
#define BWI_SPROM_GPIO23 0x66
#define BWI_SPROM_GPIO_2 __BITS(7, 0)
#define BWI_SPROM_GPIO_3 __BITS(15, 8)
#define BWI_SPROM_MAX_TXPWR 0x68
#define BWI_SPROM_MAX_TXPWR_MASK_11BG __BITS(7, 0) /* XXX */
#define BWI_SPROM_MAX_TXPWR_MASK_11A __BITS(15, 8) /* XXX */
#define BWI_SPROM_PA_PARAM_11A 0x6a
#define BWI_SPROM_IDLE_TSSI 0x70
#define BWI_SPROM_IDLE_TSSI_MASK_11BG __BITS(7, 0) /* XXX */
#define BWI_SPROM_IDLE_TSSI_MASK_11A __BITS(15, 8) /* XXX */
#define BWI_SPROM_CARD_FLAGS 0x72
#define BWI_SPROM_ANT_GAIN 0x74
#define BWI_SPROM_ANT_GAIN_MASK_11A __BITS(7, 0)
#define BWI_SPROM_ANT_GAIN_MASK_11BG __BITS(15, 8)
/*
* SPROM card flags
*/
#define BWI_CARD_F_BT_COEXIST __BIT(0) /* Bluetooth coexist */
#define BWI_CARD_F_PA_GPIO9 __BIT(1) /* GPIO 9 controls PA */
#define BWI_CARD_F_SW_NRSSI __BIT(3)
#define BWI_CARD_F_NO_SLOWCLK __BIT(5) /* no slow clock */
#define BWI_CARD_F_EXT_LNA __BIT(12) /* external LNA */
#define BWI_CARD_F_ALT_IQ __BIT(15) /* alternate I/Q */
/*
* SPROM GPIO
*/
#define BWI_LED_ACT_LOW __BIT(7)
#define BWI_LED_ACT_MASK __BITS(6, 0)
#define BWI_LED_ACT_OFF 0
#define BWI_LED_ACT_ON 1
#define BWI_LED_ACT_BLINK 2
#define BWI_LED_ACT_RF_ENABLED 3
#define BWI_LED_ACT_5GHZ 4
#define BWI_LED_ACT_2GHZ 5
#define BWI_LED_ACT_11G 6
#define BWI_LED_ACT_BLINK_SLOW 7
#define BWI_LED_ACT_BLINK_POLL 8
#define BWI_LED_ACT_UNKN 9
#define BWI_LED_ACT_ASSOC 10
#define BWI_LED_ACT_NULL 11
#define BWI_VENDOR_LED_ACT_COMPAQ \
BWI_LED_ACT_RF_ENABLED, \
BWI_LED_ACT_2GHZ, \
BWI_LED_ACT_5GHZ, \
BWI_LED_ACT_OFF
#define BWI_VENDOR_LED_ACT_LINKSYS \
BWI_LED_ACT_ASSOC, \
BWI_LED_ACT_2GHZ, \
BWI_LED_ACT_5GHZ, \
BWI_LED_ACT_OFF
#define BWI_VENDOR_LED_ACT_DEFAULT \
BWI_LED_ACT_BLINK, \
BWI_LED_ACT_2GHZ, \
BWI_LED_ACT_5GHZ, \
BWI_LED_ACT_OFF
/*
* BBP IDs
*/
#define BWI_BBPID_BCM4301 0x4301
#define BWI_BBPID_BCM4306 0x4306
#define BWI_BBPID_BCM4317 0x4317
#define BWI_BBPID_BCM4320 0x4320
#define BWI_BBPID_BCM4321 0x4321
/*
* Register window types
*/
#define BWI_REGWIN_T_COM 0x800
#define BWI_REGWIN_T_BUSPCI 0x804
#define BWI_REGWIN_T_MAC 0x812
#define BWI_REGWIN_T_BUSPCIE 0x820
/*
* MAC interrupts
*/
#define BWI_INTR_READY __BIT(0)
#define BWI_INTR_BEACON __BIT(1)
#define BWI_INTR_TBTT __BIT(2)
#define BWI_INTR_EO_ATIM __BIT(5) /* End of ATIM */
#define BWI_INTR_PMQ __BIT(6) /* XXX?? */
#define BWI_INTR_MAC_TXERR __BIT(9)
#define BWI_INTR_PHY_TXERR __BIT(11)
#define BWI_INTR_TIMER1 __BIT(14)
#define BWI_INTR_RX_DONE __BIT(15)
#define BWI_INTR_TX_FIFO __BIT(16) /* XXX?? */
#define BWI_INTR_NOISE __BIT(18)
#define BWI_INTR_RF_DISABLED __BIT(28)
#define BWI_INTR_TX_DONE __BIT(29)
#define BWI_INIT_INTRS \
(BWI_INTR_READY | BWI_INTR_BEACON | BWI_INTR_TBTT | \
BWI_INTR_EO_ATIM | BWI_INTR_PMQ | BWI_INTR_MAC_TXERR | \
BWI_INTR_PHY_TXERR | BWI_INTR_RX_DONE | BWI_INTR_TX_FIFO | \
BWI_INTR_NOISE | BWI_INTR_RF_DISABLED | BWI_INTR_TX_DONE)
#define BWI_ALL_INTRS 0xffffffff
/*
* TX/RX interrupts
*/
#define BWI_TXRX_INTR_ERROR (__BIT(15) | __BIT(14) | __BITS(12, 10))
#define BWI_TXRX_INTR_RX __BIT(16)
#define BWI_TXRX_TX_INTRS BWI_TXRX_INTR_ERROR
#define BWI_TXRX_RX_INTRS (BWI_TXRX_INTR_ERROR | BWI_TXRX_INTR_RX)
#define BWI_TXRX_IS_RX(i) ((i) % 3 == 0)
#endif /* !_IF_BWIREG_H */