freebsd-skq/sys/dev/acpica/acpi_pcib_pci.c
jhb a1cdfbb695 Implement a proper detach method for the PCI-PCI bridge driver.
- Add a pcib_detach() function for the PCI-PCI bridge driver.  It
  tears down the NEW_PCIB and hotplug state including destroying
  resource managers, deleting child devices, and disabling hotplug
  events.
- Add a detach method to the ACPI PCI-PCI bridge driver which calls
  pcib_detach() and then frees the copy of the _PRT interrupt routing
  table.
- Add a detach method to the PCI-Cardbus bridge driver which frees
  the PCI bus resources in addition to calling cbb_detach().
- Explicitly clear any pending hotplug events during attach to ensure
  future events will generate an interrupt.
- If a the Command Completed bit is set in the slot status register
  when the command completion timeout fires, treat it as if the
  command completed and the completion interrupt was just lost rather
  than forcing a detach.
- Don't wait for a Command Completed notification if Command Completion
  interrupts are disabled.  The spec explicitly says no interrupt is
  enabled when clearing CCIE, and on my T400 no interrupt is generated
  when CCIE is changed from cleared to set, either.  In addition, the
  T400 doesn't appear to set the Command Completed bit in the cases
  where it doesn't generate an interrupt, so don't schedule the timer
  either.  (If the CC bit were always set, one could always set the timer
  and rely on the logic of treating CC set as a missed interrupt.)

Reviewed by:	imp (older version)
Differential Revision:	https://reviews.freebsd.org/D6424
2016-05-20 00:03:22 +00:00

175 lines
5.0 KiB
C

/*-
* Copyright (c) 2000 Michael Smith
* Copyright (c) 2000 BSDi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_acpi.h"
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <sys/rman.h>
#include <contrib/dev/acpica/include/acpi.h>
#include <contrib/dev/acpica/include/accommon.h>
#include <dev/acpica/acpivar.h>
#include <dev/acpica/acpi_pcibvar.h>
#include <machine/pci_cfgreg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcib_private.h>
#include "pcib_if.h"
/* Hooks for the ACPI CA debugging infrastructure. */
#define _COMPONENT ACPI_BUS
ACPI_MODULE_NAME("PCI_PCI")
struct acpi_pcib_softc {
struct pcib_softc ap_pcibsc;
ACPI_HANDLE ap_handle;
ACPI_BUFFER ap_prt; /* interrupt routing table */
};
struct acpi_pcib_lookup_info {
UINT32 address;
ACPI_HANDLE handle;
};
static int acpi_pcib_pci_probe(device_t bus);
static int acpi_pcib_pci_attach(device_t bus);
static int acpi_pcib_pci_detach(device_t bus);
static int acpi_pcib_read_ivar(device_t dev, device_t child,
int which, uintptr_t *result);
static int acpi_pcib_pci_route_interrupt(device_t pcib,
device_t dev, int pin);
static device_method_t acpi_pcib_pci_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, acpi_pcib_pci_probe),
DEVMETHOD(device_attach, acpi_pcib_pci_attach),
DEVMETHOD(device_detach, acpi_pcib_pci_detach),
/* Bus interface */
DEVMETHOD(bus_read_ivar, acpi_pcib_read_ivar),
DEVMETHOD(bus_get_cpus, acpi_pcib_get_cpus),
/* pcib interface */
DEVMETHOD(pcib_route_interrupt, acpi_pcib_pci_route_interrupt),
DEVMETHOD(pcib_power_for_sleep, acpi_pcib_power_for_sleep),
DEVMETHOD_END
};
static devclass_t pcib_devclass;
DEFINE_CLASS_1(pcib, acpi_pcib_pci_driver, acpi_pcib_pci_methods,
sizeof(struct acpi_pcib_softc), pcib_driver);
DRIVER_MODULE(acpi_pcib, pci, acpi_pcib_pci_driver, pcib_devclass, 0, 0);
MODULE_DEPEND(acpi_pcib, acpi, 1, 1, 1);
static int
acpi_pcib_pci_probe(device_t dev)
{
if (pci_get_class(dev) != PCIC_BRIDGE ||
pci_get_subclass(dev) != PCIS_BRIDGE_PCI ||
acpi_disabled("pci"))
return (ENXIO);
if (acpi_get_handle(dev) == NULL)
return (ENXIO);
if (pci_cfgregopen() == 0)
return (ENXIO);
device_set_desc(dev, "ACPI PCI-PCI bridge");
return (-1000);
}
static int
acpi_pcib_pci_attach(device_t dev)
{
struct acpi_pcib_softc *sc;
ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
pcib_attach_common(dev);
sc = device_get_softc(dev);
sc->ap_handle = acpi_get_handle(dev);
acpi_pcib_fetch_prt(dev, &sc->ap_prt);
return (pcib_attach_child(dev));
}
static int
acpi_pcib_pci_detach(device_t dev)
{
struct acpi_pcib_softc *sc;
int error;
ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
sc = device_get_softc(dev);
error = pcib_detach(dev);
if (error == 0)
AcpiOsFree(sc->ap_prt.Pointer);
return (error);
}
static int
acpi_pcib_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
{
struct acpi_pcib_softc *sc = device_get_softc(dev);
switch (which) {
case ACPI_IVAR_HANDLE:
*result = (uintptr_t)sc->ap_handle;
return (0);
}
return (pcib_read_ivar(dev, child, which, result));
}
static int
acpi_pcib_pci_route_interrupt(device_t pcib, device_t dev, int pin)
{
struct acpi_pcib_softc *sc;
sc = device_get_softc(pcib);
/*
* If we don't have a _PRT, fall back to the swizzle method
* for routing interrupts.
*/
if (sc->ap_prt.Pointer == NULL)
return (pcib_route_interrupt(pcib, dev, pin));
else
return (acpi_pcib_route_interrupt(pcib, dev, pin, &sc->ap_prt));
}