freebsd-skq/sys/dev/iwm/if_iwmvar.h
Adrian Chadd be793bcd46 [iwm] Make powersaving more similar to Linux iwlwifi behaviour.
* Add a per-vap ps_disabled flag, and use it for a workaround which fixes
  an association issue when powersaving is enabled.

* Compute flag that should correpsond to the mvmif->bss_conf.ps flag in
  Linux's iwlwifi (e.g. this disallows powersaving when not associated
  yet).

Inspired-By: Linux iwlwifi

Obtained from:	dragonflybsd.git dc2e69bdfe8c9d7049c8a28da0adffbfbc6de5c0
2017-05-12 06:31:57 +00:00

571 lines
15 KiB
C

/* $OpenBSD: if_iwmvar.h,v 1.7 2015/03/02 13:51:10 jsg Exp $ */
/* $FreeBSD$ */
/*
* Copyright (c) 2014 genua mbh <info@genua.de>
* Copyright (c) 2014 Fixup Software Ltd.
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
/*-
* Based on BSD-licensed source modules in the Linux iwlwifi driver,
* which were used as the reference documentation for this implementation.
*
* Driver version we are currently based off of is
* Linux 3.14.3 (tag id a2df521e42b1d9a23f620ac79dbfe8655a8391dd)
*
***********************************************************************
*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2007 - 2013 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110,
* USA
*
* The full GNU General Public License is included in this distribution
* in the file called COPYING.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
*
* BSD LICENSE
*
* Copyright(c) 2005 - 2013 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
/*-
* Copyright (c) 2007-2010 Damien Bergamini <damien.bergamini@free.fr>
*
* Permission to use, copy, modify, and distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
struct iwm_rx_radiotap_header {
struct ieee80211_radiotap_header wr_ihdr;
uint64_t wr_tsft;
uint8_t wr_flags;
uint8_t wr_rate;
uint16_t wr_chan_freq;
uint16_t wr_chan_flags;
int8_t wr_dbm_antsignal;
int8_t wr_dbm_antnoise;
} __packed;
#define IWM_RX_RADIOTAP_PRESENT \
((1 << IEEE80211_RADIOTAP_TSFT) | \
(1 << IEEE80211_RADIOTAP_FLAGS) | \
(1 << IEEE80211_RADIOTAP_RATE) | \
(1 << IEEE80211_RADIOTAP_CHANNEL) | \
(1 << IEEE80211_RADIOTAP_DBM_ANTSIGNAL) | \
(1 << IEEE80211_RADIOTAP_DBM_ANTNOISE))
struct iwm_tx_radiotap_header {
struct ieee80211_radiotap_header wt_ihdr;
uint8_t wt_flags;
uint8_t wt_rate;
uint16_t wt_chan_freq;
uint16_t wt_chan_flags;
} __packed;
#define IWM_TX_RADIOTAP_PRESENT \
((1 << IEEE80211_RADIOTAP_FLAGS) | \
(1 << IEEE80211_RADIOTAP_RATE) | \
(1 << IEEE80211_RADIOTAP_CHANNEL))
#define IWM_UCODE_SECTION_MAX 16
/*
* fw_status is used to determine if we've already parsed the firmware file
*
* In addition to the following, status < 0 ==> -error
*/
#define IWM_FW_STATUS_NONE 0
#define IWM_FW_STATUS_INPROGRESS 1
#define IWM_FW_STATUS_DONE 2
/**
* enum iwm_ucode_type
*
* The type of ucode.
*
* @IWM_UCODE_REGULAR: Normal runtime ucode
* @IWM_UCODE_INIT: Initial ucode
* @IWM_UCODE_WOWLAN: Wake on Wireless enabled ucode
* @IWM_UCODE_REGULAR_USNIFFER: Normal runtime ucode when using usniffer image
*/
enum iwm_ucode_type {
IWM_UCODE_REGULAR,
IWM_UCODE_INIT,
IWM_UCODE_WOWLAN,
IWM_UCODE_REGULAR_USNIFFER,
IWM_UCODE_TYPE_MAX
};
struct iwm_ucode_capabilities {
uint32_t max_probe_length;
uint32_t n_scan_channels;
uint32_t flags;
uint8_t enabled_api[howmany(IWM_NUM_UCODE_TLV_API, NBBY)];
uint8_t enabled_capa[howmany(IWM_NUM_UCODE_TLV_CAPA, NBBY)];
};
static inline int
fw_has_api(const struct iwm_ucode_capabilities *capabilities,
unsigned int api)
{
return isset(capabilities->enabled_api, api);
}
static inline int
fw_has_capa(const struct iwm_ucode_capabilities *capabilities,
unsigned int capa)
{
return isset(capabilities->enabled_capa, capa);
}
/* one for each uCode image (inst/data, init/runtime/wowlan) */
struct iwm_fw_desc {
const void *data; /* vmalloc'ed data */
uint32_t len; /* size in bytes */
uint32_t offset; /* offset in the device */
};
struct iwm_fw_info {
const struct firmware *fw_fp;
int fw_status;
struct iwm_fw_sects {
struct iwm_fw_desc fw_sect[IWM_UCODE_SECTION_MAX];
int fw_count;
int is_dual_cpus;
uint32_t paging_mem_size;
} fw_sects[IWM_UCODE_TYPE_MAX];
uint32_t phy_config;
uint8_t valid_tx_ant;
uint8_t valid_rx_ant;
};
struct iwm_nvm_data {
int n_hw_addrs;
uint8_t hw_addr[IEEE80211_ADDR_LEN];
int sku_cap_band_24GHz_enable;
int sku_cap_band_52GHz_enable;
int sku_cap_11n_enable;
int sku_cap_amt_enable;
int sku_cap_ipan_enable;
uint8_t radio_cfg_type;
uint8_t radio_cfg_step;
uint8_t radio_cfg_dash;
uint8_t radio_cfg_pnum;
uint8_t valid_tx_ant, valid_rx_ant;
#define IWM_NUM_CHANNELS 39
#define IWM_NUM_CHANNELS_8000 51
uint16_t nvm_version;
uint8_t max_tx_pwr_half_dbm;
uint16_t nvm_ch_flags[];
};
/* max bufs per tfd the driver will use */
#define IWM_MAX_CMD_TBS_PER_TFD 2
struct iwm_rx_packet;
struct iwm_host_cmd {
const void *data[IWM_MAX_CMD_TBS_PER_TFD];
struct iwm_rx_packet *resp_pkt;
unsigned long _rx_page_addr;
uint32_t _rx_page_order;
int handler_status;
uint32_t flags;
uint32_t id;
uint16_t len[IWM_MAX_CMD_TBS_PER_TFD];
uint8_t dataflags[IWM_MAX_CMD_TBS_PER_TFD];
};
/*
* DMA glue is from iwn
*/
typedef caddr_t iwm_caddr_t;
typedef void *iwm_hookarg_t;
struct iwm_dma_info {
bus_dma_tag_t tag;
bus_dmamap_t map;
bus_dma_segment_t seg;
bus_addr_t paddr;
void *vaddr;
bus_size_t size;
};
/**
* struct iwm_fw_paging
* @fw_paging_block: dma memory info
* @fw_paging_size: page size
*/
struct iwm_fw_paging {
struct iwm_dma_info fw_paging_block;
uint32_t fw_paging_size;
};
#define IWM_TX_RING_COUNT 256
#define IWM_TX_RING_LOMARK 192
#define IWM_TX_RING_HIMARK 224
struct iwm_tx_data {
bus_dmamap_t map;
bus_addr_t cmd_paddr;
bus_addr_t scratch_paddr;
struct mbuf *m;
struct iwm_node *in;
int done;
};
struct iwm_tx_ring {
struct iwm_dma_info desc_dma;
struct iwm_dma_info cmd_dma;
struct iwm_tfd *desc;
struct iwm_device_cmd *cmd;
bus_dma_tag_t data_dmat;
struct iwm_tx_data data[IWM_TX_RING_COUNT];
int qid;
int queued;
int cur;
};
#define IWM_RX_RING_COUNT 256
/* Linux driver optionally uses 8k buffer */
#define IWM_RBUF_SIZE 4096
#define IWM_MAX_SCATTER 20
struct iwm_rx_data {
struct mbuf *m;
bus_dmamap_t map;
};
struct iwm_rx_ring {
struct iwm_dma_info desc_dma;
struct iwm_dma_info stat_dma;
struct iwm_dma_info buf_dma;
uint32_t *desc;
struct iwm_rb_status *stat;
struct iwm_rx_data data[IWM_RX_RING_COUNT];
bus_dmamap_t spare_map; /* for iwm_rx_addbuf() */
bus_dma_tag_t data_dmat;
int cur;
};
#define IWM_CMD_RESP_MAX PAGE_SIZE
#define IWM_MVM_TE_SESSION_PROTECTION_MAX_TIME_MS 500
#define IWM_MVM_TE_SESSION_PROTECTION_MIN_TIME_MS 400
/*
* Command headers are in iwl-trans.h, which is full of all
* kinds of other junk, so we just replicate the structures here.
* First the software bits:
*/
enum IWM_CMD_MODE {
IWM_CMD_SYNC = 0,
IWM_CMD_ASYNC = (1 << 0),
IWM_CMD_WANT_SKB = (1 << 1),
IWM_CMD_SEND_IN_RFKILL = (1 << 2),
};
enum iwm_hcmd_dataflag {
IWM_HCMD_DFL_NOCOPY = (1 << 0),
IWM_HCMD_DFL_DUP = (1 << 1),
};
struct iwm_int_sta {
uint32_t sta_id;
uint32_t tfd_queue_msk;
};
struct iwm_mvm_phy_ctxt {
uint16_t id;
uint16_t color;
uint32_t ref;
struct ieee80211_channel *channel;
};
struct iwm_bf_data {
int bf_enabled; /* filtering */
int ba_enabled; /* abort */
int ave_beacon_signal;
int last_cqm_event;
};
struct iwm_vap {
struct ieee80211vap iv_vap;
int is_uploaded;
int (*iv_newstate)(struct ieee80211vap *,
enum ieee80211_state, int);
struct iwm_mvm_phy_ctxt *phy_ctxt;
uint16_t id;
uint16_t color;
boolean_t have_wme;
/*
* QoS data from net80211, need to store this here
* as net80211 has a separate callback but we need
* to have the data for the MAC context
*/
struct {
uint16_t cw_min;
uint16_t cw_max;
uint16_t edca_txop;
uint8_t aifsn;
} queue_params[WME_NUM_AC];
/* indicates that this interface requires PS to be disabled */
boolean_t ps_disabled;
};
#define IWM_VAP(_vap) ((struct iwm_vap *)(_vap))
struct iwm_node {
struct ieee80211_node in_ni;
/* status "bits" */
int in_assoc;
struct iwm_lq_cmd in_lq;
uint8_t in_ridx[IEEE80211_RATE_MAXSIZE];
};
#define IWM_NODE(_ni) ((struct iwm_node *)(_ni))
#define IWM_STATION_ID 0
#define IWM_AUX_STA_ID 1
#define IWM_DEFAULT_MACID 0
#define IWM_DEFAULT_COLOR 0
#define IWM_DEFAULT_TSFID 0
#define IWM_ICT_SIZE 4096
#define IWM_ICT_COUNT (IWM_ICT_SIZE / sizeof (uint32_t))
#define IWM_ICT_PADDR_SHIFT 12
struct iwm_cfg;
struct iwm_softc {
device_t sc_dev;
uint32_t sc_debug;
int sc_attached;
struct mtx sc_mtx;
struct mbufq sc_snd;
struct ieee80211com sc_ic;
struct ieee80211_ratectl_tx_status sc_txs;
int sc_flags;
#define IWM_FLAG_USE_ICT (1 << 0)
#define IWM_FLAG_HW_INITED (1 << 1)
#define IWM_FLAG_STOPPED (1 << 2)
#define IWM_FLAG_RFKILL (1 << 3)
#define IWM_FLAG_BUSY (1 << 4)
#define IWM_FLAG_SCANNING (1 << 5)
#define IWM_FLAG_SCAN_RUNNING (1 << 6)
struct intr_config_hook sc_preinit_hook;
struct callout sc_watchdog_to;
struct callout sc_led_blink_to;
struct task init_task;
struct resource *sc_irq;
struct resource *sc_mem;
bus_space_tag_t sc_st;
bus_space_handle_t sc_sh;
bus_size_t sc_sz;
bus_dma_tag_t sc_dmat;
void *sc_ih;
/* TX scheduler rings. */
struct iwm_dma_info sched_dma;
uint32_t scd_base_addr;
/* TX/RX rings. */
struct iwm_tx_ring txq[IWM_MVM_MAX_QUEUES];
struct iwm_rx_ring rxq;
int qfullmsk;
int sc_sf_state;
/* ICT table. */
struct iwm_dma_info ict_dma;
int ict_cur;
int sc_hw_rev;
int sc_hw_id;
struct iwm_dma_info kw_dma;
struct iwm_dma_info fw_dma;
int sc_fw_chunk_done;
enum iwm_ucode_type cur_ucode;
int ucode_loaded;
char sc_fwver[32];
struct iwm_ucode_capabilities ucode_capa;
char sc_fw_mcc[3];
int sc_intmask;
/*
* So why do we need a separate stopped flag and a generation?
* the former protects the device from issuing commands when it's
* stopped (duh). The latter protects against race from a very
* fast stop/unstop cycle where threads waiting for responses do
* not have a chance to run in between. Notably: we want to stop
* the device from interrupt context when it craps out, so we
* don't have the luxury of waiting for quiescense.
*/
int sc_generation;
struct iwm_fw_info sc_fw;
struct iwm_tlv_calib_ctrl sc_default_calib[IWM_UCODE_TYPE_MAX];
const struct iwm_cfg *cfg;
struct iwm_nvm_data *nvm_data;
struct iwm_phy_db *sc_phy_db;
struct iwm_bf_data sc_bf;
int sc_tx_timer;
int sc_scan_last_antenna;
int sc_fixed_ridx;
int sc_staid;
int sc_nodecolor;
uint8_t sc_cmd_resp[IWM_CMD_RESP_MAX];
int sc_wantresp;
struct task sc_es_task;
struct iwm_rx_phy_info sc_last_phy_info;
int sc_ampdu_ref;
struct iwm_int_sta sc_aux_sta;
/* phy contexts. we only use the first one */
struct iwm_mvm_phy_ctxt sc_phyctxt[IWM_NUM_PHY_CTX];
struct iwm_notif_statistics sc_stats;
int sc_noise;
caddr_t sc_drvbpf;
struct iwm_rx_radiotap_header sc_rxtap;
struct iwm_tx_radiotap_header sc_txtap;
int sc_max_rssi;
struct iwm_notif_wait_data *sc_notif_wait;
int cmd_hold_nic_awake;
/* Firmware status */
uint32_t error_event_table;
uint32_t log_event_table;
uint32_t umac_error_event_table;
int support_umac_log;
/*
* Paging parameters - All of the parameters should be set by the
* opmode when paging is enabled
*/
struct iwm_fw_paging fw_paging_db[IWM_NUM_OF_FW_PAGING_BLOCKS];
uint16_t num_of_paging_blk;
uint16_t num_of_pages_in_last_blk;
boolean_t last_ebs_successful;
/* Indicate if device power save is allowed */
boolean_t sc_ps_disabled;
};
#define IWM_LOCK_INIT(_sc) \
mtx_init(&(_sc)->sc_mtx, device_get_nameunit((_sc)->sc_dev), \
MTX_NETWORK_LOCK, MTX_DEF);
#define IWM_LOCK(_sc) mtx_lock(&(_sc)->sc_mtx)
#define IWM_UNLOCK(_sc) mtx_unlock(&(_sc)->sc_mtx)
#define IWM_LOCK_DESTROY(_sc) mtx_destroy(&(_sc)->sc_mtx)