d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
bec09074ca
freebsd-skq/sys/dev/mpr/mpr_sas_lsi.c
Scott Long 757ff64216 Start overhauling debug printing in the MPS and MPR drivers. The focus of this 
commit it to make initiazation less chatty in the normal case, and more useful
and informative when real debugging is turned on.

Reviewed by:	ken (earlier version)
Sponsored by:	Netflix
2017-08-27 06:24:06 +00:00

1665 lines
51 KiB
C
Raw Blame History

/*-
* Copyright (c) 2011-2015 LSI Corp.
* Copyright (c) 2013-2016 Avago Technologies
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* Avago Technologies (LSI) MPT-Fusion Host Adapter FreeBSD
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/* Communications core for Avago Technologies (LSI) MPT3 */
/* TODO Move headers to mprvar */
#include <sys/types.h>
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/selinfo.h>
#include <sys/module.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/bio.h>
#include <sys/malloc.h>
#include <sys/uio.h>
#include <sys/sysctl.h>
#include <sys/endian.h>
#include <sys/queue.h>
#include <sys/kthread.h>
#include <sys/taskqueue.h>
#include <sys/sbuf.h>
#include <machine/bus.h>
#include <machine/resource.h>
#include <sys/rman.h>
#include <machine/stdarg.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_debug.h>
#include <cam/cam_sim.h>
#include <cam/cam_xpt_sim.h>
#include <cam/cam_xpt_periph.h>
#include <cam/cam_periph.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>
#include <dev/mpr/mpi/mpi2_type.h>
#include <dev/mpr/mpi/mpi2.h>
#include <dev/mpr/mpi/mpi2_ioc.h>
#include <dev/mpr/mpi/mpi2_sas.h>
#include <dev/mpr/mpi/mpi2_pci.h>
#include <dev/mpr/mpi/mpi2_cnfg.h>
#include <dev/mpr/mpi/mpi2_init.h>
#include <dev/mpr/mpi/mpi2_raid.h>
#include <dev/mpr/mpi/mpi2_tool.h>
#include <dev/mpr/mpr_ioctl.h>
#include <dev/mpr/mprvar.h>
#include <dev/mpr/mpr_table.h>
#include <dev/mpr/mpr_sas.h>
/* For Hashed SAS Address creation for SATA Drives */
#define MPT2SAS_SN_LEN 20
#define MPT2SAS_MN_LEN 40
struct mpr_fw_event_work {
u16 event;
void *event_data;
TAILQ_ENTRY(mpr_fw_event_work) ev_link;
};
union _sata_sas_address {
u8 wwid[8];
struct {
u32 high;
u32 low;
} word;
};
/*
* define the IDENTIFY DEVICE structure
*/
struct _ata_identify_device_data {
u16 reserved1[10]; /* 0-9 */
u16 serial_number[10]; /* 10-19 */
u16 reserved2[7]; /* 20-26 */
u16 model_number[20]; /* 27-46*/
u16 reserved3[170]; /* 47-216 */
u16 rotational_speed; /* 217 */
u16 reserved4[38]; /* 218-255 */
};
static u32 event_count;
static void mprsas_fw_work(struct mpr_softc *sc,
struct mpr_fw_event_work *fw_event);
static void mprsas_fw_event_free(struct mpr_softc *,
struct mpr_fw_event_work *);
static int mprsas_add_device(struct mpr_softc *sc, u16 handle, u8 linkrate);
static int mprsas_add_pcie_device(struct mpr_softc *sc, u16 handle,
u8 linkrate);
static int mprsas_get_sata_identify(struct mpr_softc *sc, u16 handle,
Mpi2SataPassthroughReply_t *mpi_reply, char *id_buffer, int sz,
u32 devinfo);
static void mprsas_ata_id_timeout(void *data);
int mprsas_get_sas_address_for_sata_disk(struct mpr_softc *sc,
u64 *sas_address, u16 handle, u32 device_info, u8 *is_SATA_SSD);
static int mprsas_volume_add(struct mpr_softc *sc,
u16 handle);
static void mprsas_SSU_to_SATA_devices(struct mpr_softc *sc);
static void mprsas_stop_unit_done(struct cam_periph *periph,
union ccb *done_ccb);
void
mprsas_evt_handler(struct mpr_softc *sc, uintptr_t data,
MPI2_EVENT_NOTIFICATION_REPLY *event)
{
struct mpr_fw_event_work *fw_event;
u16 sz;
mpr_dprint(sc, MPR_TRACE, "%s\n", __func__);
MPR_DPRINT_EVENT(sc, sas, event);
mprsas_record_event(sc, event);
fw_event = malloc(sizeof(struct mpr_fw_event_work), M_MPR,
M_ZERO|M_NOWAIT);
if (!fw_event) {
printf("%s: allocate failed for fw_event\n", __func__);
return;
}
sz = le16toh(event->EventDataLength) * 4;
fw_event->event_data = malloc(sz, M_MPR, M_ZERO|M_NOWAIT);
if (!fw_event->event_data) {
printf("%s: allocate failed for event_data\n", __func__);
free(fw_event, M_MPR);
return;
}
bcopy(event->EventData, fw_event->event_data, sz);
fw_event->event = event->Event;
if ((event->Event == MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST ||
event->Event == MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST ||
event->Event == MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE ||
event->Event == MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST) &&
sc->track_mapping_events)
sc->pending_map_events++;
/*
* When wait_for_port_enable flag is set, make sure that all the events
* are processed. Increment the startup_refcount and decrement it after
* events are processed.
*/
if ((event->Event == MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST ||
event->Event == MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST ||
event->Event == MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST) &&
sc->wait_for_port_enable)
mprsas_startup_increment(sc->sassc);
TAILQ_INSERT_TAIL(&sc->sassc->ev_queue, fw_event, ev_link);
taskqueue_enqueue(sc->sassc->ev_tq, &sc->sassc->ev_task);
}
static void
mprsas_fw_event_free(struct mpr_softc *sc, struct mpr_fw_event_work *fw_event)
{
free(fw_event->event_data, M_MPR);
free(fw_event, M_MPR);
}
/**
* _mpr_fw_work - delayed task for processing firmware events
* @sc: per adapter object
* @fw_event: The fw_event_work object
* Context: user.
*
* Return nothing.
*/
static void
mprsas_fw_work(struct mpr_softc *sc, struct mpr_fw_event_work *fw_event)
{
struct mprsas_softc *sassc;
sassc = sc->sassc;
mpr_dprint(sc, MPR_EVENT, "(%d)->(%s) Working on Event: [%x]\n",
event_count++, __func__, fw_event->event);
switch (fw_event->event) {
case MPI2_EVENT_SAS_TOPOLOGY_CHANGE_LIST:
{
MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST *data;
MPI2_EVENT_SAS_TOPO_PHY_ENTRY *phy;
uint8_t i;
data = (MPI2_EVENT_DATA_SAS_TOPOLOGY_CHANGE_LIST *)
fw_event->event_data;
mpr_mapping_topology_change_event(sc, fw_event->event_data);
for (i = 0; i < data->NumEntries; i++) {
phy = &data->PHY[i];
switch (phy->PhyStatus & MPI2_EVENT_SAS_TOPO_RC_MASK) {
case MPI2_EVENT_SAS_TOPO_RC_TARG_ADDED:
if (mprsas_add_device(sc,
le16toh(phy->AttachedDevHandle),
phy->LinkRate)) {
mpr_dprint(sc, MPR_ERROR, "%s: "
"failed to add device with handle "
"0x%x\n", __func__,
le16toh(phy->AttachedDevHandle));
mprsas_prepare_remove(sassc, le16toh(
phy->AttachedDevHandle));
}
break;
case MPI2_EVENT_SAS_TOPO_RC_TARG_NOT_RESPONDING:
mprsas_prepare_remove(sassc, le16toh(
phy->AttachedDevHandle));
break;
case MPI2_EVENT_SAS_TOPO_RC_PHY_CHANGED:
case MPI2_EVENT_SAS_TOPO_RC_NO_CHANGE:
case MPI2_EVENT_SAS_TOPO_RC_DELAY_NOT_RESPONDING:
default:
break;
}
}
/*
* refcount was incremented for this event in
* mprsas_evt_handler. Decrement it here because the event has
* been processed.
*/
mprsas_startup_decrement(sassc);
break;
}
case MPI2_EVENT_SAS_DISCOVERY:
{
MPI2_EVENT_DATA_SAS_DISCOVERY *data;
data = (MPI2_EVENT_DATA_SAS_DISCOVERY *)fw_event->event_data;
if (data->ReasonCode & MPI2_EVENT_SAS_DISC_RC_STARTED)
mpr_dprint(sc, MPR_TRACE,"SAS discovery start event\n");
if (data->ReasonCode & MPI2_EVENT_SAS_DISC_RC_COMPLETED) {
mpr_dprint(sc, MPR_TRACE,"SAS discovery stop event\n");
sassc->flags &= ~MPRSAS_IN_DISCOVERY;
mprsas_discovery_end(sassc);
}
break;
}
case MPI2_EVENT_SAS_ENCL_DEVICE_STATUS_CHANGE:
{
Mpi2EventDataSasEnclDevStatusChange_t *data;
data = (Mpi2EventDataSasEnclDevStatusChange_t *)
fw_event->event_data;
mpr_mapping_enclosure_dev_status_change_event(sc,
fw_event->event_data);
break;
}
case MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST:
{
Mpi2EventIrConfigElement_t *element;
int i;
u8 foreign_config, reason;
u16 elementType;
Mpi2EventDataIrConfigChangeList_t *event_data;
struct mprsas_target *targ;
unsigned int id;
event_data = fw_event->event_data;
foreign_config = (le32toh(event_data->Flags) &
MPI2_EVENT_IR_CHANGE_FLAGS_FOREIGN_CONFIG) ? 1 : 0;
element =
(Mpi2EventIrConfigElement_t *)&event_data->ConfigElement[0];
id = mpr_mapping_get_raid_tid_from_handle(sc,
element->VolDevHandle);
mpr_mapping_ir_config_change_event(sc, event_data);
for (i = 0; i < event_data->NumElements; i++, element++) {
reason = element->ReasonCode;
elementType = le16toh(element->ElementFlags) &
MPI2_EVENT_IR_CHANGE_EFLAGS_ELEMENT_TYPE_MASK;
/*
* check for element type of Phys Disk or Hot Spare
*/
if ((elementType !=
MPI2_EVENT_IR_CHANGE_EFLAGS_VOLPHYSDISK_ELEMENT)
&& (elementType !=
MPI2_EVENT_IR_CHANGE_EFLAGS_HOTSPARE_ELEMENT))
// do next element
goto skip_fp_send;
/*
* check for reason of Hide, Unhide, PD Created, or PD
* Deleted
*/
if ((reason != MPI2_EVENT_IR_CHANGE_RC_HIDE) &&
(reason != MPI2_EVENT_IR_CHANGE_RC_UNHIDE) &&
(reason != MPI2_EVENT_IR_CHANGE_RC_PD_CREATED) &&
(reason != MPI2_EVENT_IR_CHANGE_RC_PD_DELETED))
goto skip_fp_send;
// check for a reason of Hide or PD Created
if ((reason == MPI2_EVENT_IR_CHANGE_RC_HIDE) ||
(reason == MPI2_EVENT_IR_CHANGE_RC_PD_CREATED))
{
// build RAID Action message
Mpi2RaidActionRequest_t *action;
Mpi2RaidActionReply_t *reply = NULL;
struct mpr_command *cm;
int error = 0;
if ((cm = mpr_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed\n",
__func__);
return;
}
mpr_dprint(sc, MPR_EVENT, "Sending FP action "
"from "
"MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST "
":\n");
action = (MPI2_RAID_ACTION_REQUEST *)cm->cm_req;
action->Function = MPI2_FUNCTION_RAID_ACTION;
action->Action =
MPI2_RAID_ACTION_PHYSDISK_HIDDEN;
action->PhysDiskNum = element->PhysDiskNum;
cm->cm_desc.Default.RequestFlags =
MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
error = mpr_request_polled(sc, &cm);
if (cm != NULL)
reply = (Mpi2RaidActionReply_t *)
cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/*
* If the poll returns error then we
* need to do diag reset
*/
printf("%s: poll for page completed "
"with error %d", __func__, error);
}
if (reply && (le16toh(reply->IOCStatus) &
MPI2_IOCSTATUS_MASK) !=
MPI2_IOCSTATUS_SUCCESS) {
mpr_dprint(sc, MPR_ERROR, "%s: error "
"sending RaidActionPage; "
"iocstatus = 0x%x\n", __func__,
le16toh(reply->IOCStatus));
}
if (cm)
mpr_free_command(sc, cm);
}
skip_fp_send:
mpr_dprint(sc, MPR_EVENT, "Received "
"MPI2_EVENT_IR_CONFIGURATION_CHANGE_LIST Reason "
"code %x:\n", element->ReasonCode);
switch (element->ReasonCode) {
case MPI2_EVENT_IR_CHANGE_RC_VOLUME_CREATED:
case MPI2_EVENT_IR_CHANGE_RC_ADDED:
if (!foreign_config) {
if (mprsas_volume_add(sc,
le16toh(element->VolDevHandle))) {
printf("%s: failed to add RAID "
"volume with handle 0x%x\n",
__func__, le16toh(element->
VolDevHandle));
}
}
break;
case MPI2_EVENT_IR_CHANGE_RC_VOLUME_DELETED:
case MPI2_EVENT_IR_CHANGE_RC_REMOVED:
/*
* Rescan after volume is deleted or removed.
*/
if (!foreign_config) {
if (id == MPR_MAP_BAD_ID) {
printf("%s: could not get ID "
"for volume with handle "
"0x%04x\n", __func__,
le16toh(element->
VolDevHandle));
break;
}
targ = &sassc->targets[id];
targ->handle = 0x0;
targ->encl_slot = 0x0;
targ->encl_handle = 0x0;
targ->encl_level_valid = 0x0;
targ->encl_level = 0x0;
targ->connector_name[0] = ' ';
targ->connector_name[1] = ' ';
targ->connector_name[2] = ' ';
targ->connector_name[3] = ' ';
targ->exp_dev_handle = 0x0;
targ->phy_num = 0x0;
targ->linkrate = 0x0;
mprsas_rescan_target(sc, targ);
printf("RAID target id 0x%x removed\n",
targ->tid);
}
break;
case MPI2_EVENT_IR_CHANGE_RC_PD_CREATED:
case MPI2_EVENT_IR_CHANGE_RC_HIDE:
/*
* Phys Disk of a volume has been created. Hide
* it from the OS.
*/
targ = mprsas_find_target_by_handle(sassc, 0,
element->PhysDiskDevHandle);
if (targ == NULL)
break;
targ->flags |= MPR_TARGET_FLAGS_RAID_COMPONENT;
mprsas_rescan_target(sc, targ);
break;
case MPI2_EVENT_IR_CHANGE_RC_PD_DELETED:
/*
* Phys Disk of a volume has been deleted.
* Expose it to the OS.
*/
if (mprsas_add_device(sc,
le16toh(element->PhysDiskDevHandle), 0)) {
printf("%s: failed to add device with "
"handle 0x%x\n", __func__,
le16toh(element->
PhysDiskDevHandle));
mprsas_prepare_remove(sassc,
le16toh(element->
PhysDiskDevHandle));
}
break;
}
}
/*
* refcount was incremented for this event in
* mprsas_evt_handler. Decrement it here because the event has
* been processed.
*/
mprsas_startup_decrement(sassc);
break;
}
case MPI2_EVENT_IR_VOLUME:
{
Mpi2EventDataIrVolume_t *event_data = fw_event->event_data;
/*
* Informational only.
*/
mpr_dprint(sc, MPR_EVENT, "Received IR Volume event:\n");
switch (event_data->ReasonCode) {
case MPI2_EVENT_IR_VOLUME_RC_SETTINGS_CHANGED:
mpr_dprint(sc, MPR_EVENT, " Volume Settings "
"changed from 0x%x to 0x%x for Volome with "
"handle 0x%x", le32toh(event_data->PreviousValue),
le32toh(event_data->NewValue),
le16toh(event_data->VolDevHandle));
break;
case MPI2_EVENT_IR_VOLUME_RC_STATUS_FLAGS_CHANGED:
mpr_dprint(sc, MPR_EVENT, " Volume Status "
"changed from 0x%x to 0x%x for Volome with "
"handle 0x%x", le32toh(event_data->PreviousValue),
le32toh(event_data->NewValue),
le16toh(event_data->VolDevHandle));
break;
case MPI2_EVENT_IR_VOLUME_RC_STATE_CHANGED:
mpr_dprint(sc, MPR_EVENT, " Volume State "
"changed from 0x%x to 0x%x for Volome with "
"handle 0x%x", le32toh(event_data->PreviousValue),
le32toh(event_data->NewValue),
le16toh(event_data->VolDevHandle));
u32 state;
struct mprsas_target *targ;
state = le32toh(event_data->NewValue);
switch (state) {
case MPI2_RAID_VOL_STATE_MISSING:
case MPI2_RAID_VOL_STATE_FAILED:
mprsas_prepare_volume_remove(sassc,
event_data->VolDevHandle);
break;
case MPI2_RAID_VOL_STATE_ONLINE:
case MPI2_RAID_VOL_STATE_DEGRADED:
case MPI2_RAID_VOL_STATE_OPTIMAL:
targ =
mprsas_find_target_by_handle(sassc,
0, event_data->VolDevHandle);
if (targ) {
printf("%s %d: Volume handle "
"0x%x is already added \n",
__func__, __LINE__,
event_data->VolDevHandle);
break;
}
if (mprsas_volume_add(sc,
le16toh(event_data->
VolDevHandle))) {
printf("%s: failed to add RAID "
"volume with handle 0x%x\n",
__func__, le16toh(
event_data->VolDevHandle));
}
break;
default:
break;
}
break;
default:
break;
}
break;
}
case MPI2_EVENT_IR_PHYSICAL_DISK:
{
Mpi2EventDataIrPhysicalDisk_t *event_data =
fw_event->event_data;
struct mprsas_target *targ;
/*
* Informational only.
*/
mpr_dprint(sc, MPR_EVENT, "Received IR Phys Disk event:\n");
switch (event_data->ReasonCode) {
case MPI2_EVENT_IR_PHYSDISK_RC_SETTINGS_CHANGED:
mpr_dprint(sc, MPR_EVENT, " Phys Disk Settings "
"changed from 0x%x to 0x%x for Phys Disk Number "
"%d and handle 0x%x at Enclosure handle 0x%x, Slot "
"%d", le32toh(event_data->PreviousValue),
le32toh(event_data->NewValue),
event_data->PhysDiskNum,
le16toh(event_data->PhysDiskDevHandle),
le16toh(event_data->EnclosureHandle),
le16toh(event_data->Slot));
break;
case MPI2_EVENT_IR_PHYSDISK_RC_STATUS_FLAGS_CHANGED:
mpr_dprint(sc, MPR_EVENT, " Phys Disk Status changed "
"from 0x%x to 0x%x for Phys Disk Number %d and "
"handle 0x%x at Enclosure handle 0x%x, Slot %d",
le32toh(event_data->PreviousValue),
le32toh(event_data->NewValue),
event_data->PhysDiskNum,
le16toh(event_data->PhysDiskDevHandle),
le16toh(event_data->EnclosureHandle),
le16toh(event_data->Slot));
break;
case MPI2_EVENT_IR_PHYSDISK_RC_STATE_CHANGED:
mpr_dprint(sc, MPR_EVENT, " Phys Disk State changed "
"from 0x%x to 0x%x for Phys Disk Number %d and "
"handle 0x%x at Enclosure handle 0x%x, Slot %d",
le32toh(event_data->PreviousValue),
le32toh(event_data->NewValue),
event_data->PhysDiskNum,
le16toh(event_data->PhysDiskDevHandle),
le16toh(event_data->EnclosureHandle),
le16toh(event_data->Slot));
switch (event_data->NewValue) {
case MPI2_RAID_PD_STATE_ONLINE:
case MPI2_RAID_PD_STATE_DEGRADED:
case MPI2_RAID_PD_STATE_REBUILDING:
case MPI2_RAID_PD_STATE_OPTIMAL:
case MPI2_RAID_PD_STATE_HOT_SPARE:
targ = mprsas_find_target_by_handle(
sassc, 0,
event_data->PhysDiskDevHandle);
if (targ) {
targ->flags |=
MPR_TARGET_FLAGS_RAID_COMPONENT;
printf("%s %d: Found Target "
"for handle 0x%x.\n",
__func__, __LINE__ ,
event_data->
PhysDiskDevHandle);
}
break;
case MPI2_RAID_PD_STATE_OFFLINE:
case MPI2_RAID_PD_STATE_NOT_CONFIGURED:
case MPI2_RAID_PD_STATE_NOT_COMPATIBLE:
default:
targ = mprsas_find_target_by_handle(
sassc, 0,
event_data->PhysDiskDevHandle);
if (targ) {
targ->flags |=
~MPR_TARGET_FLAGS_RAID_COMPONENT;
printf("%s %d: Found Target "
"for handle 0x%x. \n",
__func__, __LINE__ ,
event_data->
PhysDiskDevHandle);
}
break;
}
default:
break;
}
break;
}
case MPI2_EVENT_IR_OPERATION_STATUS:
{
Mpi2EventDataIrOperationStatus_t *event_data =
fw_event->event_data;
/*
* Informational only.
*/
mpr_dprint(sc, MPR_EVENT, "Received IR Op Status event:\n");
mpr_dprint(sc, MPR_EVENT, " RAID Operation of %d is %d "
"percent complete for Volume with handle 0x%x",
event_data->RAIDOperation, event_data->PercentComplete,
le16toh(event_data->VolDevHandle));
break;
}
case MPI2_EVENT_TEMP_THRESHOLD:
{
pMpi2EventDataTemperature_t temp_event;
temp_event = (pMpi2EventDataTemperature_t)fw_event->event_data;
/*
* The Temp Sensor Count must be greater than the event's Sensor
* Num to be valid. If valid, print the temp thresholds that
* have been exceeded.
*/
if (sc->iounit_pg8.NumSensors > temp_event->SensorNum) {
mpr_dprint(sc, MPR_FAULT, "Temperature Threshold flags "
"%s %s %s %s exceeded for Sensor: %d !!!\n",
((temp_event->Status & 0x01) == 1) ? "0 " : " ",
((temp_event->Status & 0x02) == 2) ? "1 " : " ",
((temp_event->Status & 0x04) == 4) ? "2 " : " ",
((temp_event->Status & 0x08) == 8) ? "3 " : " ",
temp_event->SensorNum);
mpr_dprint(sc, MPR_FAULT, "Current Temp in Celsius: "
"%d\n", temp_event->CurrentTemperature);
}
break;
}
case MPI2_EVENT_ACTIVE_CABLE_EXCEPTION:
{
pMpi26EventDataActiveCableExcept_t ace_event_data;
ace_event_data =
(pMpi26EventDataActiveCableExcept_t)fw_event->event_data;
switch(ace_event_data->ReasonCode) {
case MPI26_EVENT_ACTIVE_CABLE_INSUFFICIENT_POWER:
{
mpr_printf(sc, "Currently a cable with "
"ReceptacleID %d cannot be powered and device "
"connected to this active cable will not be seen. "
"This active cable requires %d mW of power.\n",
ace_event_data->ReceptacleID,
ace_event_data->ActiveCablePowerRequirement);
break;
}
case MPI26_EVENT_ACTIVE_CABLE_DEGRADED:
{
mpr_printf(sc, "Currently a cable with "
"ReceptacleID %d is not running at optimal speed "
"(12 Gb/s rate)\n", ace_event_data->ReceptacleID);
break;
}
default:
break;
}
break;
}
case MPI2_EVENT_PCIE_TOPOLOGY_CHANGE_LIST:
{
MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST *data;
MPI26_EVENT_PCIE_TOPO_PORT_ENTRY *port_entry;
uint8_t i, link_rate;
uint16_t handle;
data = (MPI26_EVENT_DATA_PCIE_TOPOLOGY_CHANGE_LIST *)
fw_event->event_data;
mpr_mapping_pcie_topology_change_event(sc,
fw_event->event_data);
for (i = 0; i < data->NumEntries; i++) {
port_entry = &data->PortEntry[i];
handle = le16toh(port_entry->AttachedDevHandle);
link_rate = port_entry->CurrentPortInfo &
MPI26_EVENT_PCIE_TOPO_PI_RATE_MASK;
switch (port_entry->PortStatus) {
case MPI26_EVENT_PCIE_TOPO_PS_DEV_ADDED:
if (link_rate <
MPI26_EVENT_PCIE_TOPO_PI_RATE_2_5) {
mpr_dprint(sc, MPR_ERROR, "%s: Cannot "
"add PCIe device with handle 0x%x "
"with unknown link rate.\n",
__func__, handle);
break;
}
if (mprsas_add_pcie_device(sc, handle,
link_rate)) {
mpr_dprint(sc, MPR_ERROR, "%s: failed "
"to add PCIe device with handle "
"0x%x\n", __func__, handle);
mprsas_prepare_remove(sassc, handle);
}
break;
case MPI26_EVENT_PCIE_TOPO_PS_NOT_RESPONDING:
mprsas_prepare_remove(sassc, handle);
break;
case MPI26_EVENT_PCIE_TOPO_PS_PORT_CHANGED:
case MPI26_EVENT_PCIE_TOPO_PS_NO_CHANGE:
case MPI26_EVENT_PCIE_TOPO_PS_DELAY_NOT_RESPONDING:
default:
break;
}
}
/*
* refcount was incremented for this event in
* mprsas_evt_handler. Decrement it here because the event has
* been processed.
*/
mprsas_startup_decrement(sassc);
break;
}
case MPI2_EVENT_SAS_DEVICE_STATUS_CHANGE:
case MPI2_EVENT_SAS_BROADCAST_PRIMITIVE:
default:
mpr_dprint(sc, MPR_TRACE,"Unhandled event 0x%0X\n",
fw_event->event);
break;
}
mpr_dprint(sc, MPR_EVENT, "(%d)->(%s) Event Free: [%x]\n", event_count,
__func__, fw_event->event);
mprsas_fw_event_free(sc, fw_event);
}
void
mprsas_firmware_event_work(void *arg, int pending)
{
struct mpr_fw_event_work *fw_event;
struct mpr_softc *sc;
sc = (struct mpr_softc *)arg;
mpr_lock(sc);
while ((fw_event = TAILQ_FIRST(&sc->sassc->ev_queue)) != NULL) {
TAILQ_REMOVE(&sc->sassc->ev_queue, fw_event, ev_link);
mprsas_fw_work(sc, fw_event);
}
mpr_unlock(sc);
}
static int
mprsas_add_device(struct mpr_softc *sc, u16 handle, u8 linkrate)
{
char devstring[80];
struct mprsas_softc *sassc;
struct mprsas_target *targ;
Mpi2ConfigReply_t mpi_reply;
Mpi2SasDevicePage0_t config_page;
uint64_t sas_address, parent_sas_address = 0;
u32 device_info, parent_devinfo = 0;
unsigned int id;
int ret = 1, error = 0, i;
struct mprsas_lun *lun;
u8 is_SATA_SSD = 0;
struct mpr_command *cm;
sassc = sc->sassc;
mprsas_startup_increment(sassc);
if ((mpr_config_get_sas_device_pg0(sc, &mpi_reply, &config_page,
MPI2_SAS_DEVICE_PGAD_FORM_HANDLE, handle))) {
printf("%s: error reading SAS device page0\n", __func__);
error = ENXIO;
goto out;
}
device_info = le32toh(config_page.DeviceInfo);
if (((device_info & MPI2_SAS_DEVICE_INFO_SMP_TARGET) == 0)
&& (le16toh(config_page.ParentDevHandle) != 0)) {
Mpi2ConfigReply_t tmp_mpi_reply;
Mpi2SasDevicePage0_t parent_config_page;
if ((mpr_config_get_sas_device_pg0(sc, &tmp_mpi_reply,
&parent_config_page, MPI2_SAS_DEVICE_PGAD_FORM_HANDLE,
le16toh(config_page.ParentDevHandle)))) {
mpr_dprint(sc, MPR_MAPPING|MPR_FAULT,
"%s: error reading SAS device %#x page0\n",
__func__, le16toh(config_page.ParentDevHandle));
} else {
parent_sas_address = parent_config_page.SASAddress.High;
parent_sas_address = (parent_sas_address << 32) |
parent_config_page.SASAddress.Low;
parent_devinfo = le32toh(parent_config_page.DeviceInfo);
}
}
/* TODO Check proper endianness */
sas_address = config_page.SASAddress.High;
sas_address = (sas_address << 32) | config_page.SASAddress.Low;
mpr_dprint(sc, MPR_MAPPING, "Handle 0x%04x SAS Address from SAS device "
"page0 = %jx\n", handle, sas_address);
/*
* Always get SATA Identify information because this is used to
* determine if Start/Stop Unit should be sent to the drive when the
* system is shutdown.
*/
if (device_info & MPI2_SAS_DEVICE_INFO_SATA_DEVICE) {
ret = mprsas_get_sas_address_for_sata_disk(sc, &sas_address,
handle, device_info, &is_SATA_SSD);
if (ret) {
mpr_dprint(sc, MPR_MAPPING|MPR_ERROR,
"%s: failed to get disk type (SSD or HDD) for SATA "
"device with handle 0x%04x\n",
__func__, handle);
} else {
mpr_dprint(sc, MPR_MAPPING, "Handle 0x%04x SAS Address "
"from SATA device = %jx\n", handle, sas_address);
}
}
/*
* use_phynum:
* 1 - use the PhyNum field as a fallback to the mapping logic
* 0 - never use the PhyNum field
* -1 - only use the PhyNum field
*
* Note that using the Phy number to map a device can cause device adds
* to fail if multiple enclosures/expanders are in the topology. For
* example, if two devices are in the same slot number in two different
* enclosures within the topology, only one of those devices will be
* added. PhyNum mapping should not be used if multiple enclosures are
* in the topology.
*/
id = MPR_MAP_BAD_ID;
if (sc->use_phynum != -1)
id = mpr_mapping_get_tid(sc, sas_address, handle);
if (id == MPR_MAP_BAD_ID) {
if ((sc->use_phynum == 0) ||
((id = config_page.PhyNum) > sassc->maxtargets)) {
mpr_dprint(sc, MPR_INFO, "failure at %s:%d/%s()! "
"Could not get ID for device with handle 0x%04x\n",
__FILE__, __LINE__, __func__, handle);
error = ENXIO;
goto out;
}
}
mpr_dprint(sc, MPR_MAPPING, "%s: Target ID for added device is %d.\n",
__func__, id);
/*
* Only do the ID check and reuse check if the target is not from a
* RAID Component. For Physical Disks of a Volume, the ID will be reused
* when a volume is deleted because the mapping entry for the PD will
* still be in the mapping table. The ID check should not be done here
* either since this PD is already being used.
*/
targ = &sassc->targets[id];
if (!(targ->flags & MPR_TARGET_FLAGS_RAID_COMPONENT)) {
if (mprsas_check_id(sassc, id) != 0) {
mpr_dprint(sc, MPR_MAPPING|MPR_INFO,
"Excluding target id %d\n", id);
error = ENXIO;
goto out;
}
if (targ->handle != 0x0) {
mpr_dprint(sc, MPR_MAPPING, "Attempting to reuse "
"target id %d handle 0x%04x\n", id, targ->handle);
error = ENXIO;
goto out;
}
}
targ->devinfo = device_info;
targ->devname = le32toh(config_page.DeviceName.High);
targ->devname = (targ->devname << 32) |
le32toh(config_page.DeviceName.Low);
targ->encl_handle = le16toh(config_page.EnclosureHandle);
targ->encl_slot = le16toh(config_page.Slot);
targ->encl_level = config_page.EnclosureLevel;
targ->connector_name[0] = config_page.ConnectorName[0];
targ->connector_name[1] = config_page.ConnectorName[1];
targ->connector_name[2] = config_page.ConnectorName[2];
targ->connector_name[3] = config_page.ConnectorName[3];
targ->handle = handle;
targ->parent_handle = le16toh(config_page.ParentDevHandle);
targ->sasaddr = mpr_to_u64(&config_page.SASAddress);
targ->parent_sasaddr = le64toh(parent_sas_address);
targ->parent_devinfo = parent_devinfo;
targ->tid = id;
targ->linkrate = (linkrate>>4);
targ->flags = 0;
if (is_SATA_SSD) {
targ->flags = MPR_TARGET_IS_SATA_SSD;
}
if ((le16toh(config_page.Flags) &
MPI25_SAS_DEVICE0_FLAGS_ENABLED_FAST_PATH) &&
(le16toh(config_page.Flags) &
MPI25_SAS_DEVICE0_FLAGS_FAST_PATH_CAPABLE)) {
targ->scsi_req_desc_type =
MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO;
}
if (le16toh(config_page.Flags) &
MPI2_SAS_DEVICE0_FLAGS_ENCL_LEVEL_VALID) {
targ->encl_level_valid = TRUE;
}
TAILQ_INIT(&targ->commands);
TAILQ_INIT(&targ->timedout_commands);
while (!SLIST_EMPTY(&targ->luns)) {
lun = SLIST_FIRST(&targ->luns);
SLIST_REMOVE_HEAD(&targ->luns, lun_link);
free(lun, M_MPR);
}
SLIST_INIT(&targ->luns);
mpr_describe_devinfo(targ->devinfo, devstring, 80);
mpr_dprint(sc, (MPR_INFO|MPR_MAPPING), "Found device <%s> <%s> "
"handle<0x%04x> enclosureHandle<0x%04x> slot %d\n", devstring,
mpr_describe_table(mpr_linkrate_names, targ->linkrate),
targ->handle, targ->encl_handle, targ->encl_slot);
if (targ->encl_level_valid) {
mpr_dprint(sc, (MPR_INFO|MPR_MAPPING), "At enclosure level %d "
"and connector name (%4s)\n", targ->encl_level,
targ->connector_name);
}
#if ((__FreeBSD_version >= 1000000) && (__FreeBSD_version < 1000039)) || \
(__FreeBSD_version < 902502)
if ((sassc->flags & MPRSAS_IN_STARTUP) == 0)
#endif
mprsas_rescan_target(sc, targ);
mpr_dprint(sc, MPR_MAPPING, "Target id 0x%x added\n", targ->tid);
/*
* Check all commands to see if the SATA_ID_TIMEOUT flag has been set.
* If so, send a Target Reset TM to the target that was just created.
* An Abort Task TM should be used instead of a Target Reset, but that
* would be much more difficult because targets have not been fully
* discovered yet, and LUN's haven't been setup. So, just reset the
* target instead of the LUN.
*/
for (i = 1; i < sc->num_reqs; i++) {
cm = &sc->commands[i];
if (cm->cm_flags & MPR_CM_FLAGS_SATA_ID_TIMEOUT) {
targ->timeouts++;
cm->cm_state = MPR_CM_STATE_TIMEDOUT;
if ((targ->tm = mprsas_alloc_tm(sc)) != NULL) {
mpr_dprint(sc, MPR_INFO, "%s: sending Target "
"Reset for stuck SATA identify command "
"(cm = %p)\n", __func__, cm);
targ->tm->cm_targ = targ;
mprsas_send_reset(sc, targ->tm,
MPI2_SCSITASKMGMT_TASKTYPE_TARGET_RESET);
} else {
mpr_dprint(sc, MPR_ERROR, "Failed to allocate "
"tm for Target Reset after SATA ID command "
"timed out (cm %p)\n", cm);
}
/*
* No need to check for more since the target is
* already being reset.
*/
break;
}
}
out:
/*
* Free the commands that may not have been freed from the SATA ID call
*/
for (i = 1; i < sc->num_reqs; i++) {
cm = &sc->commands[i];
if (cm->cm_flags & MPR_CM_FLAGS_SATA_ID_TIMEOUT) {
mpr_free_command(sc, cm);
}
}
mprsas_startup_decrement(sassc);
return (error);
}
int
mprsas_get_sas_address_for_sata_disk(struct mpr_softc *sc,
u64 *sas_address, u16 handle, u32 device_info, u8 *is_SATA_SSD)
{
Mpi2SataPassthroughReply_t mpi_reply;
int i, rc, try_count;
u32 *bufferptr;
union _sata_sas_address hash_address;
struct _ata_identify_device_data ata_identify;
u8 buffer[MPT2SAS_MN_LEN + MPT2SAS_SN_LEN];
u32 ioc_status;
u8 sas_status;
memset(&ata_identify, 0, sizeof(ata_identify));
memset(&mpi_reply, 0, sizeof(mpi_reply));
try_count = 0;
do {
rc = mprsas_get_sata_identify(sc, handle, &mpi_reply,
(char *)&ata_identify, sizeof(ata_identify), device_info);
try_count++;
ioc_status = le16toh(mpi_reply.IOCStatus)
& MPI2_IOCSTATUS_MASK;
sas_status = mpi_reply.SASStatus;
switch (ioc_status) {
case MPI2_IOCSTATUS_SUCCESS:
break;
case MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR:
/* No sense sleeping. this error won't get better */
break;
default:
if (sc->spinup_wait_time > 0) {
mpr_dprint(sc, MPR_INFO, "Sleeping %d seconds "
"after SATA ID error to wait for spinup\n",
sc->spinup_wait_time);
msleep(&sc->msleep_fake_chan, &sc->mpr_mtx, 0,
"mprid", sc->spinup_wait_time * hz);
}
}
} while (((rc && (rc != EWOULDBLOCK)) ||
(ioc_status && (ioc_status != MPI2_IOCSTATUS_SCSI_PROTOCOL_ERROR))
|| sas_status) && (try_count < 5));
if (rc == 0 && !ioc_status && !sas_status) {
mpr_dprint(sc, MPR_MAPPING, "%s: got SATA identify "
"successfully for handle = 0x%x with try_count = %d\n",
__func__, handle, try_count);
} else {
mpr_dprint(sc, MPR_MAPPING, "%s: handle = 0x%x failed\n",
__func__, handle);
return -1;
}
/* Copy & byteswap the 40 byte model number to a buffer */
for (i = 0; i < MPT2SAS_MN_LEN; i += 2) {
buffer[i] = ((u8 *)ata_identify.model_number)[i + 1];
buffer[i + 1] = ((u8 *)ata_identify.model_number)[i];
}
/* Copy & byteswap the 20 byte serial number to a buffer */
for (i = 0; i < MPT2SAS_SN_LEN; i += 2) {
buffer[MPT2SAS_MN_LEN + i] =
((u8 *)ata_identify.serial_number)[i + 1];
buffer[MPT2SAS_MN_LEN + i + 1] =
((u8 *)ata_identify.serial_number)[i];
}
bufferptr = (u32 *)buffer;
/* There are 60 bytes to hash down to 8. 60 isn't divisible by 8,
* so loop through the first 56 bytes (7*8),
* and then add in the last dword.
*/
hash_address.word.low = 0;
hash_address.word.high = 0;
for (i = 0; (i < ((MPT2SAS_MN_LEN+MPT2SAS_SN_LEN)/8)); i++) {
hash_address.word.low += *bufferptr;
bufferptr++;
hash_address.word.high += *bufferptr;
bufferptr++;
}
/* Add the last dword */
hash_address.word.low += *bufferptr;
/* Make sure the hash doesn't start with 5, because it could clash
* with a SAS address. Change 5 to a D.
*/
if ((hash_address.word.high & 0x000000F0) == (0x00000050))
hash_address.word.high |= 0x00000080;
*sas_address = (u64)hash_address.wwid[0] << 56 |
(u64)hash_address.wwid[1] << 48 | (u64)hash_address.wwid[2] << 40 |
(u64)hash_address.wwid[3] << 32 | (u64)hash_address.wwid[4] << 24 |
(u64)hash_address.wwid[5] << 16 | (u64)hash_address.wwid[6] << 8 |
(u64)hash_address.wwid[7];
if (ata_identify.rotational_speed == 1) {
*is_SATA_SSD = 1;
}
return 0;
}
static int
mprsas_get_sata_identify(struct mpr_softc *sc, u16 handle,
Mpi2SataPassthroughReply_t *mpi_reply, char *id_buffer, int sz, u32 devinfo)
{
Mpi2SataPassthroughRequest_t *mpi_request;
Mpi2SataPassthroughReply_t *reply;
struct mpr_command *cm;
char *buffer;
int error = 0;
buffer = malloc( sz, M_MPR, M_NOWAIT | M_ZERO);
if (!buffer)
return ENOMEM;
if ((cm = mpr_alloc_command(sc)) == NULL) {
free(buffer, M_MPR);
return (EBUSY);
}
mpi_request = (MPI2_SATA_PASSTHROUGH_REQUEST *)cm->cm_req;
bzero(mpi_request,sizeof(MPI2_SATA_PASSTHROUGH_REQUEST));
mpi_request->Function = MPI2_FUNCTION_SATA_PASSTHROUGH;
mpi_request->VF_ID = 0;
mpi_request->DevHandle = htole16(handle);
mpi_request->PassthroughFlags = (MPI2_SATA_PT_REQ_PT_FLAGS_PIO |
MPI2_SATA_PT_REQ_PT_FLAGS_READ);
mpi_request->DataLength = htole32(sz);
mpi_request->CommandFIS[0] = 0x27;
mpi_request->CommandFIS[1] = 0x80;
mpi_request->CommandFIS[2] = (devinfo &
MPI2_SAS_DEVICE_INFO_ATAPI_DEVICE) ? 0xA1 : 0xEC;
cm->cm_sge = &mpi_request->SGL;
cm->cm_sglsize = sizeof(MPI2_SGE_IO_UNION);
cm->cm_flags = MPR_CM_FLAGS_DATAIN;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
cm->cm_data = buffer;
cm->cm_length = htole32(sz);
/*
* Start a timeout counter specifically for the SATA ID command. This
* is used to fix a problem where the FW does not send a reply sometimes
* when a bad disk is in the topology. So, this is used to timeout the
* command so that processing can continue normally.
*/
mpr_dprint(sc, MPR_XINFO, "%s start timeout counter for SATA ID "
"command\n", __func__);
callout_reset(&cm->cm_callout, MPR_ATA_ID_TIMEOUT * hz,
mprsas_ata_id_timeout, cm);
error = mpr_wait_command(sc, &cm, 60, CAN_SLEEP);
mpr_dprint(sc, MPR_XINFO, "%s stop timeout counter for SATA ID "
"command\n", __func__);
/* XXX KDM need to fix the case where this command is destroyed */
callout_stop(&cm->cm_callout);
if (cm != NULL)
reply = (Mpi2SataPassthroughReply_t *)cm->cm_reply;
if (error || (reply == NULL)) {
/* FIXME */
/*
* If the request returns an error then we need to do a diag
* reset
*/
printf("%s: request for page completed with error %d",
__func__, error);
error = ENXIO;
goto out;
}
bcopy(buffer, id_buffer, sz);
bcopy(reply, mpi_reply, sizeof(Mpi2SataPassthroughReply_t));
if ((le16toh(reply->IOCStatus) & MPI2_IOCSTATUS_MASK) !=
MPI2_IOCSTATUS_SUCCESS) {
printf("%s: error reading SATA PASSTHRU; iocstatus = 0x%x\n",
__func__, reply->IOCStatus);
error = ENXIO;
goto out;
}
out:
/*
* If the SATA_ID_TIMEOUT flag has been set for this command, don't free
* it. The command will be freed after sending a target reset TM. If
* the command did timeout, use EWOULDBLOCK.
*/
if ((cm->cm_flags & MPR_CM_FLAGS_SATA_ID_TIMEOUT) == 0)
mpr_free_command(sc, cm);
else if (error == 0)
error = EWOULDBLOCK;
cm->cm_data = NULL;
free(buffer, M_MPR);
return (error);
}
static void
mprsas_ata_id_timeout(void *data)
{
struct mpr_softc *sc;
struct mpr_command *cm;
cm = (struct mpr_command *)data;
sc = cm->cm_sc;
mtx_assert(&sc->mpr_mtx, MA_OWNED);
mpr_dprint(sc, MPR_INFO, "%s checking ATA ID command %p sc %p\n",
__func__, cm, sc);
if ((callout_pending(&cm->cm_callout)) ||
(!callout_active(&cm->cm_callout))) {
mpr_dprint(sc, MPR_INFO, "%s ATA ID command almost timed out\n",
__func__);
return;
}
callout_deactivate(&cm->cm_callout);
/*
* Run the interrupt handler to make sure it's not pending. This
* isn't perfect because the command could have already completed
* and been re-used, though this is unlikely.
*/
mpr_intr_locked(sc);
if (cm->cm_state == MPR_CM_STATE_FREE) {
mpr_dprint(sc, MPR_INFO, "%s ATA ID command almost timed out\n",
__func__);
return;
}
mpr_dprint(sc, MPR_INFO, "ATA ID command timeout cm %p\n", cm);
/*
* Send wakeup() to the sleeping thread that issued this ATA ID command.
* wakeup() will cause msleep to return a 0 (not EWOULDBLOCK), and this
* will keep reinit() from being called. This way, an Abort Task TM can
* be issued so that the timed out command can be cleared. The Abort
* Task cannot be sent from here because the driver has not completed
* setting up targets. Instead, the command is flagged so that special
* handling will be used to send the abort.
*/
cm->cm_flags |= MPR_CM_FLAGS_SATA_ID_TIMEOUT;
wakeup(cm);
}
static int
mprsas_add_pcie_device(struct mpr_softc *sc, u16 handle, u8 linkrate)
{
char devstring[80];
struct mprsas_softc *sassc;
struct mprsas_target *targ;
Mpi2ConfigReply_t mpi_reply;
Mpi26PCIeDevicePage0_t config_page;
Mpi26PCIeDevicePage2_t config_page2;
uint64_t pcie_wwid, parent_wwid = 0;
u32 device_info, parent_devinfo = 0;
unsigned int id;
int error = 0;
struct mprsas_lun *lun;
sassc = sc->sassc;
mprsas_startup_increment(sassc);
if ((mpr_config_get_pcie_device_pg0(sc, &mpi_reply, &config_page,
MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE, handle))) {
printf("%s: error reading PCIe device page0\n", __func__);
error = ENXIO;
goto out;
}
device_info = le32toh(config_page.DeviceInfo);
if (((device_info & MPI26_PCIE_DEVINFO_PCI_SWITCH) == 0)
&& (le16toh(config_page.ParentDevHandle) != 0)) {
Mpi2ConfigReply_t tmp_mpi_reply;
Mpi26PCIeDevicePage0_t parent_config_page;
if ((mpr_config_get_pcie_device_pg0(sc, &tmp_mpi_reply,
&parent_config_page, MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE,
le16toh(config_page.ParentDevHandle)))) {
printf("%s: error reading PCIe device %#x page0\n",
__func__, le16toh(config_page.ParentDevHandle));
} else {
parent_wwid = parent_config_page.WWID.High;
parent_wwid = (parent_wwid << 32) |
parent_config_page.WWID.Low;
parent_devinfo = le32toh(parent_config_page.DeviceInfo);
}
}
/* TODO Check proper endianness */
pcie_wwid = config_page.WWID.High;
pcie_wwid = (pcie_wwid << 32) | config_page.WWID.Low;
mpr_dprint(sc, MPR_INFO, "PCIe WWID from PCIe device page0 = %jx\n",
pcie_wwid);
if ((mpr_config_get_pcie_device_pg2(sc, &mpi_reply, &config_page2,
MPI26_PCIE_DEVICE_PGAD_FORM_HANDLE, handle))) {
printf("%s: error reading PCIe device page2\n", __func__);
error = ENXIO;
goto out;
}
id = mpr_mapping_get_tid(sc, pcie_wwid, handle);
if (id == MPR_MAP_BAD_ID) {
mpr_dprint(sc, MPR_ERROR | MPR_INFO, "failure at %s:%d/%s()! "
"Could not get ID for device with handle 0x%04x\n",
__FILE__, __LINE__, __func__, handle);
error = ENXIO;
goto out;
}
mpr_dprint(sc, MPR_MAPPING, "%s: Target ID for added device is %d.\n",
__func__, id);
if (mprsas_check_id(sassc, id) != 0) {
mpr_dprint(sc, MPR_MAPPING|MPR_INFO,
"Excluding target id %d\n", id);
error = ENXIO;
goto out;
}
mpr_dprint(sc, MPR_MAPPING, "WWID from PCIe device page0 = %jx\n",
pcie_wwid);
targ = &sassc->targets[id];
targ->devinfo = device_info;
targ->encl_handle = le16toh(config_page.EnclosureHandle);
targ->encl_slot = le16toh(config_page.Slot);
targ->encl_level = config_page.EnclosureLevel;
targ->connector_name[0] = ((char *)&config_page.ConnectorName)[0];
targ->connector_name[1] = ((char *)&config_page.ConnectorName)[1];
targ->connector_name[2] = ((char *)&config_page.ConnectorName)[2];
targ->connector_name[3] = ((char *)&config_page.ConnectorName)[3];
targ->is_nvme = device_info & MPI26_PCIE_DEVINFO_NVME;
targ->MDTS = config_page2.MaximumDataTransferSize;
/*
* Assume always TRUE for encl_level_valid because there is no valid
* flag for PCIe.
*/
targ->encl_level_valid = TRUE;
targ->handle = handle;
targ->parent_handle = le16toh(config_page.ParentDevHandle);
targ->sasaddr = mpr_to_u64(&config_page.WWID);
targ->parent_sasaddr = le64toh(parent_wwid);
targ->parent_devinfo = parent_devinfo;
targ->tid = id;
targ->linkrate = linkrate;
targ->flags = 0;
if ((le16toh(config_page.Flags) &
MPI26_PCIEDEV0_FLAGS_ENABLED_FAST_PATH) &&
(le16toh(config_page.Flags) &
MPI26_PCIEDEV0_FLAGS_FAST_PATH_CAPABLE)) {
targ->scsi_req_desc_type =
MPI25_REQ_DESCRIPT_FLAGS_FAST_PATH_SCSI_IO;
}
TAILQ_INIT(&targ->commands);
TAILQ_INIT(&targ->timedout_commands);
while (!SLIST_EMPTY(&targ->luns)) {
lun = SLIST_FIRST(&targ->luns);
SLIST_REMOVE_HEAD(&targ->luns, lun_link);
free(lun, M_MPR);
}
SLIST_INIT(&targ->luns);
mpr_describe_devinfo(targ->devinfo, devstring, 80);
mpr_dprint(sc, (MPR_INFO|MPR_MAPPING), "Found PCIe device <%s> <%s> "
"handle<0x%04x> enclosureHandle<0x%04x> slot %d\n", devstring,
mpr_describe_table(mpr_pcie_linkrate_names, targ->linkrate),
targ->handle, targ->encl_handle, targ->encl_slot);
if (targ->encl_level_valid) {
mpr_dprint(sc, (MPR_INFO|MPR_MAPPING), "At enclosure level %d "
"and connector name (%4s)\n", targ->encl_level,
targ->connector_name);
}
#if ((__FreeBSD_version >= 1000000) && (__FreeBSD_version < 1000039)) || \
(__FreeBSD_version < 902502)
if ((sassc->flags & MPRSAS_IN_STARTUP) == 0)
#endif
mprsas_rescan_target(sc, targ);
mpr_dprint(sc, MPR_MAPPING, "Target id 0x%x added\n", targ->tid);
out:
mprsas_startup_decrement(sassc);
return (error);
}
static int
mprsas_volume_add(struct mpr_softc *sc, u16 handle)
{
struct mprsas_softc *sassc;
struct mprsas_target *targ;
u64 wwid;
unsigned int id;
int error = 0;
struct mprsas_lun *lun;
sassc = sc->sassc;
mprsas_startup_increment(sassc);
/* wwid is endian safe */
mpr_config_get_volume_wwid(sc, handle, &wwid);
if (!wwid) {
printf("%s: invalid WWID; cannot add volume to mapping table\n",
__func__);
error = ENXIO;
goto out;
}
id = mpr_mapping_get_raid_tid(sc, wwid, handle);
if (id == MPR_MAP_BAD_ID) {
printf("%s: could not get ID for volume with handle 0x%04x and "
"WWID 0x%016llx\n", __func__, handle,
(unsigned long long)wwid);
error = ENXIO;
goto out;
}
targ = &sassc->targets[id];
targ->tid = id;
targ->handle = handle;
targ->devname = wwid;
TAILQ_INIT(&targ->commands);
TAILQ_INIT(&targ->timedout_commands);
while (!SLIST_EMPTY(&targ->luns)) {
lun = SLIST_FIRST(&targ->luns);
SLIST_REMOVE_HEAD(&targ->luns, lun_link);
free(lun, M_MPR);
}
SLIST_INIT(&targ->luns);
#if ((__FreeBSD_version >= 1000000) && (__FreeBSD_version < 1000039)) || \
(__FreeBSD_version < 902502)
if ((sassc->flags & MPRSAS_IN_STARTUP) == 0)
#endif
mprsas_rescan_target(sc, targ);
mpr_dprint(sc, MPR_MAPPING, "RAID target id %d added (WWID = 0x%jx)\n",
targ->tid, wwid);
out:
mprsas_startup_decrement(sassc);
return (error);
}
/**
* mprsas_SSU_to_SATA_devices
* @sc: per adapter object
*
* Looks through the target list and issues a StartStopUnit SCSI command to each
* SATA direct-access device. This helps to ensure that data corruption is
* avoided when the system is being shut down. This must be called after the IR
* System Shutdown RAID Action is sent if in IR mode.
*
* Return nothing.
*/
static void
mprsas_SSU_to_SATA_devices(struct mpr_softc *sc)
{
struct mprsas_softc *sassc = sc->sassc;
union ccb *ccb;
path_id_t pathid = cam_sim_path(sassc->sim);
target_id_t targetid;
struct mprsas_target *target;
char path_str[64];
struct timeval cur_time, start_time;
mpr_lock(sc);
/*
* For each target, issue a StartStopUnit command to stop the device.
*/
sc->SSU_started = TRUE;
sc->SSU_refcount = 0;
for (targetid = 0; targetid < sc->max_devices; targetid++) {
target = &sassc->targets[targetid];
if (target->handle == 0x0) {
continue;
}
/*
* The stop_at_shutdown flag will be set if this device is
* a SATA direct-access end device.
*/
if (target->stop_at_shutdown) {
ccb = xpt_alloc_ccb_nowait();
if (ccb == NULL) {
mpr_dprint(sc, MPR_FAULT, "Unable to alloc CCB "
"to stop unit.\n");
return;
}
if (xpt_create_path(&ccb->ccb_h.path, xpt_periph,
pathid, targetid, CAM_LUN_WILDCARD) !=
CAM_REQ_CMP) {
mpr_dprint(sc, MPR_ERROR, "Unable to create "
"path to stop unit.\n");
xpt_free_ccb(ccb);
return;
}
xpt_path_string(ccb->ccb_h.path, path_str,
sizeof(path_str));
mpr_dprint(sc, MPR_INFO, "Sending StopUnit: path %s "
"handle %d\n", path_str, target->handle);
/*
* Issue a START STOP UNIT command for the target.
* Increment the SSU counter to be used to count the
* number of required replies.
*/
mpr_dprint(sc, MPR_INFO, "Incrementing SSU count\n");
sc->SSU_refcount++;
ccb->ccb_h.target_id =
xpt_path_target_id(ccb->ccb_h.path);
ccb->ccb_h.ppriv_ptr1 = sassc;
scsi_start_stop(&ccb->csio,
/*retries*/0,
mprsas_stop_unit_done,
MSG_SIMPLE_Q_TAG,
/*start*/FALSE,
/*load/eject*/0,
/*immediate*/FALSE,
MPR_SENSE_LEN,
/*timeout*/10000);
xpt_action(ccb);
}
}
mpr_unlock(sc);
/*
* Wait until all of the SSU commands have completed or time has
* expired (60 seconds). Pause for 100ms each time through. If any
* command times out, the target will be reset in the SCSI command
* timeout routine.
*/
getmicrotime(&start_time);
while (sc->SSU_refcount) {
pause("mprwait", hz/10);
getmicrotime(&cur_time);
if ((cur_time.tv_sec - start_time.tv_sec) > 60) {
mpr_dprint(sc, MPR_ERROR, "Time has expired waiting "
"for SSU commands to complete.\n");
break;
}
}
}
static void
mprsas_stop_unit_done(struct cam_periph *periph, union ccb *done_ccb)
{
struct mprsas_softc *sassc;
char path_str[64];
if (done_ccb == NULL)
return;
sassc = (struct mprsas_softc *)done_ccb->ccb_h.ppriv_ptr1;
xpt_path_string(done_ccb->ccb_h.path, path_str, sizeof(path_str));
mpr_dprint(sassc->sc, MPR_INFO, "Completing stop unit for %s\n",
path_str);
/*
* Nothing more to do except free the CCB and path. If the command
* timed out, an abort reset, then target reset will be issued during
* the SCSI Command process.
*/
xpt_free_path(done_ccb->ccb_h.path);
xpt_free_ccb(done_ccb);
}
/**
* mprsas_ir_shutdown - IR shutdown notification
* @sc: per adapter object
*
* Sending RAID Action to alert the Integrated RAID subsystem of the IOC that
* the host system is shutting down.
*
* Return nothing.
*/
void
mprsas_ir_shutdown(struct mpr_softc *sc)
{
u16 volume_mapping_flags;
u16 ioc_pg8_flags = le16toh(sc->ioc_pg8.Flags);
struct dev_mapping_table *mt_entry;
u32 start_idx, end_idx;
unsigned int id, found_volume = 0;
struct mpr_command *cm;
Mpi2RaidActionRequest_t *action;
target_id_t targetid;
struct mprsas_target *target;
mpr_dprint(sc, MPR_TRACE, "%s\n", __func__);
/* is IR firmware build loaded? */
if (!sc->ir_firmware)
goto out;
/* are there any volumes? Look at IR target IDs. */
// TODO-later, this should be looked up in the RAID config structure
// when it is implemented.
volume_mapping_flags = le16toh(sc->ioc_pg8.IRVolumeMappingFlags) &
MPI2_IOCPAGE8_IRFLAGS_MASK_VOLUME_MAPPING_MODE;
if (volume_mapping_flags == MPI2_IOCPAGE8_IRFLAGS_LOW_VOLUME_MAPPING) {
start_idx = 0;
if (ioc_pg8_flags & MPI2_IOCPAGE8_FLAGS_RESERVED_TARGETID_0)
start_idx = 1;
} else
start_idx = sc->max_devices - sc->max_volumes;
end_idx = start_idx + sc->max_volumes - 1;
for (id = start_idx; id < end_idx; id++) {
mt_entry = &sc->mapping_table[id];
if ((mt_entry->physical_id != 0) &&
(mt_entry->missing_count == 0)) {
found_volume = 1;
break;
}
}
if (!found_volume)
goto out;
if ((cm = mpr_alloc_command(sc)) == NULL) {
printf("%s: command alloc failed\n", __func__);
goto out;
}
action = (MPI2_RAID_ACTION_REQUEST *)cm->cm_req;
action->Function = MPI2_FUNCTION_RAID_ACTION;
action->Action = MPI2_RAID_ACTION_SYSTEM_SHUTDOWN_INITIATED;
cm->cm_desc.Default.RequestFlags = MPI2_REQ_DESCRIPT_FLAGS_DEFAULT_TYPE;
mpr_lock(sc);
mpr_wait_command(sc, &cm, 5, CAN_SLEEP);
mpr_unlock(sc);
/*
* Don't check for reply, just leave.
*/
if (cm)
mpr_free_command(sc, cm);
out:
/*
* All of the targets must have the correct value set for
* 'stop_at_shutdown' for the current 'enable_ssu' sysctl variable.
*
* The possible values for the 'enable_ssu' variable are:
* 0: disable to SSD and HDD
* 1: disable only to HDD (default)
* 2: disable only to SSD
* 3: enable to SSD and HDD
* anything else will default to 1.
*/
for (targetid = 0; targetid < sc->max_devices; targetid++) {
target = &sc->sassc->targets[targetid];
if (target->handle == 0x0) {
continue;
}
if (target->supports_SSU) {
switch (sc->enable_ssu) {
case MPR_SSU_DISABLE_SSD_DISABLE_HDD:
target->stop_at_shutdown = FALSE;
break;
case MPR_SSU_DISABLE_SSD_ENABLE_HDD:
target->stop_at_shutdown = TRUE;
if (target->flags & MPR_TARGET_IS_SATA_SSD) {
target->stop_at_shutdown = FALSE;
}
break;
case MPR_SSU_ENABLE_SSD_ENABLE_HDD:
target->stop_at_shutdown = TRUE;
break;
case MPR_SSU_ENABLE_SSD_DISABLE_HDD:
default:
target->stop_at_shutdown = TRUE;
if ((target->flags &
MPR_TARGET_IS_SATA_SSD) == 0) {
target->stop_at_shutdown = FALSE;
}
break;
}
}
}
mprsas_SSU_to_SATA_devices(sc);
}
Reference in New Issue View Git Blame Copy Permalink