thompsa c08375b9a1 Add a GPIO driver for the Gateworks Cambria platform. ... The external gpio pins are connected to a PLD on the i2c bus, unfortunatley this device does not conform by failing to send an ack after each byte written. The iicbb driver will abort the transfer when the address is not ack'd and it would introduce a lot of churn to be able to pass a flag down to iicbb_start/iicbb_write. Instead we do bad things by grabbing the iicbus but then doing our own bit banging.		2010-11-11 20:18:33 +00:00
..
arm	Adjust the order of operations in spinlock_enter() and spinlock_exit() to	2010-11-05 13:42:58 +00:00
at91	Remove a device_printf() accidentally left in r213894.	2010-10-15 15:16:36 +00:00
compile
conf	Add a GPIO driver for the Gateworks Cambria platform.	2010-11-11 20:18:33 +00:00
econa	Convert the PHY drivers to honor the mii_flags passed down and convert	2010-10-15 14:52:11 +00:00
include	- Remove <machine/mutex.h>. Most of the headers were empty, and the	2010-11-09 20:46:41 +00:00
mv	Set of legacy mode SATA enchancements:	2010-10-18 11:30:13 +00:00
s3c2xx0	Allow external interrupts.	2010-07-24 23:41:09 +00:00
sa11x0	The NetBSD Foundation has granted permission to remove clauses 3 and 4.	2010-02-16 21:59:17 +00:00
xscale	Add a GPIO driver for the Gateworks Cambria platform.	2010-11-11 20:18:33 +00:00