d/freebsd-skq
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
c19ed2c875
freebsd-skq/sys/dev/amr/amr_cam.c
pfg 1537078d8f sys/dev: further adoption of SPDX licensing ID tags. 
Mainly focus on files that use BSD 2-Clause license, however the tool I
was using misidentified many licenses so this was mostly a manual - error
prone - task.

The Software Package Data Exchange (SPDX) group provides a specification
to make it easier for automated tools to detect and summarize well known
opensource licenses. We are gradually adopting the specification, noting
that the tags are considered only advisory and do not, in any way,
superceed or replace the license texts.
2017-11-27 14:52:40 +00:00

632 lines
17 KiB
C
Raw Blame History

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 2000 Michael Smith
* Copyright (c) 2000 BSDi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
/*-
* Copyright (c) 2002 Eric Moore
* Copyright (c) 2002 LSI Logic Corporation
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The party using or redistributing the source code and binary forms
* agrees to the disclaimer below and the terms and conditions set forth
* herein.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/malloc.h>
#include <sys/kernel.h>
#include <sys/module.h>
#include <sys/bio.h>
#include <sys/bus.h>
#include <sys/conf.h>
#include <sys/stat.h>
#include <cam/cam.h>
#include <cam/cam_ccb.h>
#include <cam/cam_sim.h>
#include <cam/cam_xpt.h>
#include <cam/cam_xpt_sim.h>
#include <cam/cam_debug.h>
#include <cam/scsi/scsi_all.h>
#include <cam/scsi/scsi_message.h>
#include <machine/resource.h>
#include <machine/bus.h>
#include <dev/amr/amrreg.h>
#include <dev/amr/amrvar.h>
static int amr_cam_probe(device_t dev);
static int amr_cam_attach(device_t dev);
static int amr_cam_detach(device_t dev);
static void amr_cam_action(struct cam_sim *sim, union ccb *ccb);
static void amr_cam_poll(struct cam_sim *sim);
static void amr_cam_complete(struct amr_command *ac);
static int amr_cam_command(struct amr_softc *sc, struct amr_command **acp);
static devclass_t amr_pass_devclass;
static device_method_t amr_pass_methods[] = {
DEVMETHOD(device_probe, amr_cam_probe),
DEVMETHOD(device_attach, amr_cam_attach),
DEVMETHOD(device_detach, amr_cam_detach),
{ 0, 0 }
};
static driver_t amr_pass_driver = {
"amrp",
amr_pass_methods,
0
};
DRIVER_MODULE(amrp, amr, amr_pass_driver, amr_pass_devclass, 0, 0);
MODULE_DEPEND(amrp, cam, 1, 1, 1);
static MALLOC_DEFINE(M_AMRCAM, "amrcam", "AMR CAM memory");
/***********************************************************************
* Enqueue/dequeue functions
*/
static __inline void
amr_enqueue_ccb(struct amr_softc *sc, union ccb *ccb)
{
TAILQ_INSERT_TAIL(&sc->amr_cam_ccbq, &ccb->ccb_h, sim_links.tqe);
}
static __inline void
amr_requeue_ccb(struct amr_softc *sc, union ccb *ccb)
{
TAILQ_INSERT_HEAD(&sc->amr_cam_ccbq, &ccb->ccb_h, sim_links.tqe);
}
static __inline union ccb *
amr_dequeue_ccb(struct amr_softc *sc)
{
union ccb *ccb;
if ((ccb = (union ccb *)TAILQ_FIRST(&sc->amr_cam_ccbq)) != NULL)
TAILQ_REMOVE(&sc->amr_cam_ccbq, &ccb->ccb_h, sim_links.tqe);
return(ccb);
}
static int
amr_cam_probe(device_t dev)
{
return (0);
}
/********************************************************************************
* Attach our 'real' SCSI channels to CAM
*/
static int
amr_cam_attach(device_t dev)
{
struct amr_softc *sc;
struct cam_devq *devq;
int chn, error;
sc = device_get_softc(dev);
/* initialise the ccb queue */
TAILQ_INIT(&sc->amr_cam_ccbq);
/*
* Allocate a devq for all our channels combined. This should
* allow for the maximum number of SCSI commands we will accept
* at one time. Save the pointer in the softc so we can find it later
* during detach.
*/
if ((devq = cam_simq_alloc(AMR_MAX_SCSI_CMDS)) == NULL)
return(ENOMEM);
sc->amr_cam_devq = devq;
/*
* Iterate over our channels, registering them with CAM
*/
for (chn = 0; chn < sc->amr_maxchan; chn++) {
/* allocate a sim */
if ((sc->amr_cam_sim[chn] = cam_sim_alloc(amr_cam_action,
amr_cam_poll, "amr", sc, device_get_unit(sc->amr_dev),
&sc->amr_list_lock, 1, AMR_MAX_SCSI_CMDS, devq)) == NULL) {
cam_simq_free(devq);
device_printf(sc->amr_dev, "CAM SIM attach failed\n");
return(ENOMEM);
}
/* register the bus ID so we can get it later */
mtx_lock(&sc->amr_list_lock);
error = xpt_bus_register(sc->amr_cam_sim[chn], sc->amr_dev,chn);
mtx_unlock(&sc->amr_list_lock);
if (error) {
device_printf(sc->amr_dev,
"CAM XPT bus registration failed\n");
return(ENXIO);
}
}
/*
* XXX we should scan the config and work out which devices are
* actually protected.
*/
sc->amr_cam_command = amr_cam_command;
return(0);
}
/********************************************************************************
* Disconnect ourselves from CAM
*/
static int
amr_cam_detach(device_t dev)
{
struct amr_softc *sc;
int chn;
sc = device_get_softc(dev);
mtx_lock(&sc->amr_list_lock);
for (chn = 0; chn < sc->amr_maxchan; chn++) {
/*
* If a sim was allocated for this channel, free it
*/
if (sc->amr_cam_sim[chn] != NULL) {
xpt_bus_deregister(cam_sim_path(sc->amr_cam_sim[chn]));
cam_sim_free(sc->amr_cam_sim[chn], FALSE);
}
}
mtx_unlock(&sc->amr_list_lock);
/* Now free the devq */
if (sc->amr_cam_devq != NULL)
cam_simq_free(sc->amr_cam_devq);
return (0);
}
/***********************************************************************
***********************************************************************
CAM passthrough interface
***********************************************************************
***********************************************************************/
/***********************************************************************
* Handle a request for action from CAM
*/
static void
amr_cam_action(struct cam_sim *sim, union ccb *ccb)
{
struct amr_softc *sc = cam_sim_softc(sim);
switch(ccb->ccb_h.func_code) {
/*
* Perform SCSI I/O to a physical device.
*/
case XPT_SCSI_IO:
{
struct ccb_hdr *ccbh = &ccb->ccb_h;
struct ccb_scsiio *csio = &ccb->csio;
/* Validate the CCB */
ccbh->status = CAM_REQ_INPROG;
/* check the CDB length */
if (csio->cdb_len > AMR_MAX_EXTCDB_LEN)
ccbh->status = CAM_REQ_INVALID;
if ((csio->cdb_len > AMR_MAX_CDB_LEN) &&
(sc->support_ext_cdb == 0))
ccbh->status = CAM_REQ_INVALID;
/* check that the CDB pointer is not to a physical address */
if ((ccbh->flags & CAM_CDB_POINTER) &&
(ccbh->flags & CAM_CDB_PHYS))
ccbh->status = CAM_REQ_INVALID;
/*
* if there is data transfer, it must be to/from a virtual
* address
*/
if ((ccbh->flags & CAM_DIR_MASK) != CAM_DIR_NONE) {
if ((ccbh->flags & CAM_DATA_MASK) != CAM_DATA_VADDR)
/* we can't map it */
ccbh->status = CAM_REQ_INVALID;
}
/*
* If the command is to a LUN other than 0, fail it.
* This is probably incorrect, but during testing the
* firmware did not seem to respect the LUN field, and thus
* devices appear echoed.
*/
if (csio->ccb_h.target_lun != 0)
ccbh->status = CAM_DEV_NOT_THERE;
/* if we're happy with the request, queue it for attention */
if (ccbh->status == CAM_REQ_INPROG) {
/* save the channel number in the ccb */
csio->ccb_h.sim_priv.entries[0].field= cam_sim_bus(sim);
amr_enqueue_ccb(sc, ccb);
amr_startio(sc);
return;
}
break;
}
case XPT_CALC_GEOMETRY:
{
cam_calc_geometry(&ccb->ccg, /*extended*/1);
break;
}
/*
* Return path stats. Some of these should probably be amended.
*/
case XPT_PATH_INQ:
{
struct ccb_pathinq *cpi = & ccb->cpi;
debug(3, "XPT_PATH_INQ");
cpi->version_num = 1; /* XXX??? */
cpi->hba_inquiry = PI_SDTR_ABLE|PI_TAG_ABLE|PI_WIDE_16;
cpi->target_sprt = 0;
cpi->hba_misc = PIM_NOBUSRESET|PIM_SEQSCAN;
cpi->hba_eng_cnt = 0;
cpi->max_target = AMR_MAX_TARGETS;
cpi->max_lun = 0 /* AMR_MAX_LUNS*/;
cpi->initiator_id = 7; /* XXX variable? */
strlcpy(cpi->sim_vid, "FreeBSD", SIM_IDLEN);
strlcpy(cpi->hba_vid, "LSI", HBA_IDLEN);
strlcpy(cpi->dev_name, cam_sim_name(sim), DEV_IDLEN);
cpi->unit_number = cam_sim_unit(sim);
cpi->bus_id = cam_sim_bus(sim);
cpi->base_transfer_speed = 132 * 1024; /* XXX */
cpi->transport = XPORT_SPI;
cpi->transport_version = 2;
cpi->protocol = PROTO_SCSI;
cpi->protocol_version = SCSI_REV_2;
cpi->ccb_h.status = CAM_REQ_CMP;
break;
}
case XPT_RESET_BUS:
{
struct ccb_pathinq *cpi = & ccb->cpi;
debug(1, "XPT_RESET_BUS");
cpi->ccb_h.status = CAM_REQ_CMP;
break;
}
case XPT_RESET_DEV:
{
debug(1, "XPT_RESET_DEV");
ccb->ccb_h.status = CAM_REQ_CMP;
break;
}
case XPT_GET_TRAN_SETTINGS:
{
struct ccb_trans_settings *cts = &(ccb->cts);
debug(3, "XPT_GET_TRAN_SETTINGS");
struct ccb_trans_settings_scsi *scsi;
struct ccb_trans_settings_spi *spi;
scsi = &cts->proto_specific.scsi;
spi = &cts->xport_specific.spi;
cts->protocol = PROTO_SCSI;
cts->protocol_version = SCSI_REV_2;
cts->transport = XPORT_SPI;
cts->transport_version = 2;
if (cts->type == CTS_TYPE_USER_SETTINGS) {
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
break;
}
spi->flags = CTS_SPI_FLAGS_DISC_ENB;
spi->bus_width = MSG_EXT_WDTR_BUS_32_BIT;
spi->sync_period = 6; /* 40MHz how wide is this bus? */
spi->sync_offset = 31; /* How to extract this from board? */
spi->valid = CTS_SPI_VALID_SYNC_RATE
| CTS_SPI_VALID_SYNC_OFFSET
| CTS_SPI_VALID_BUS_WIDTH
| CTS_SPI_VALID_DISC;
scsi->valid = CTS_SCSI_VALID_TQ;
ccb->ccb_h.status = CAM_REQ_CMP;
break;
}
case XPT_SET_TRAN_SETTINGS:
debug(3, "XPT_SET_TRAN_SETTINGS");
ccb->ccb_h.status = CAM_FUNC_NOTAVAIL;
break;
/*
* Reject anything else as unsupported.
*/
default:
/* we can't do this */
ccb->ccb_h.status = CAM_REQ_INVALID;
break;
}
mtx_assert(&sc->amr_list_lock, MA_OWNED);
xpt_done(ccb);
}
/***********************************************************************
* Convert a CAM CCB off the top of the CCB queue to a passthrough SCSI
* command.
*/
static int
amr_cam_command(struct amr_softc *sc, struct amr_command **acp)
{
struct amr_command *ac;
struct amr_passthrough *ap;
struct amr_ext_passthrough *aep;
struct ccb_scsiio *csio;
int bus, target, error;
error = 0;
ac = NULL;
ap = NULL;
aep = NULL;
/* check to see if there is a ccb for us to work with */
if ((csio = (struct ccb_scsiio *)amr_dequeue_ccb(sc)) == NULL)
goto out;
/* get bus/target, XXX validate against protected devices? */
bus = csio->ccb_h.sim_priv.entries[0].field;
target = csio->ccb_h.target_id;
/*
* Build a passthrough command.
*/
/* construct command */
if ((ac = amr_alloccmd(sc)) == NULL) {
error = ENOMEM;
goto out;
}
/* construct passthrough */
if (sc->support_ext_cdb ) {
aep = &ac->ac_ccb->ccb_epthru;
aep->ap_timeout = 2;
aep->ap_ars = 1;
aep->ap_request_sense_length = 14;
aep->ap_islogical = 0;
aep->ap_channel = bus;
aep->ap_scsi_id = target;
aep->ap_logical_drive_no = csio->ccb_h.target_lun;
aep->ap_cdb_length = csio->cdb_len;
aep->ap_data_transfer_length = csio->dxfer_len;
if (csio->ccb_h.flags & CAM_CDB_POINTER) {
bcopy(csio->cdb_io.cdb_ptr, aep->ap_cdb, csio->cdb_len);
} else {
bcopy(csio->cdb_io.cdb_bytes, aep->ap_cdb,
csio->cdb_len);
}
/*
* we leave the data s/g list and s/g count to the map routine
* later
*/
debug(2, " COMMAND %x/%d+%d to %d:%d:%d", aep->ap_cdb[0],
aep->ap_cdb_length, csio->dxfer_len, aep->ap_channel,
aep->ap_scsi_id, aep->ap_logical_drive_no);
} else {
ap = &ac->ac_ccb->ccb_pthru;
ap->ap_timeout = 0;
ap->ap_ars = 1;
ap->ap_request_sense_length = 14;
ap->ap_islogical = 0;
ap->ap_channel = bus;
ap->ap_scsi_id = target;
ap->ap_logical_drive_no = csio->ccb_h.target_lun;
ap->ap_cdb_length = csio->cdb_len;
ap->ap_data_transfer_length = csio->dxfer_len;
if (csio->ccb_h.flags & CAM_CDB_POINTER) {
bcopy(csio->cdb_io.cdb_ptr, ap->ap_cdb, csio->cdb_len);
} else {
bcopy(csio->cdb_io.cdb_bytes, ap->ap_cdb,
csio->cdb_len);
}
/*
* we leave the data s/g list and s/g count to the map routine
* later
*/
debug(2, " COMMAND %x/%d+%d to %d:%d:%d", ap->ap_cdb[0],
ap->ap_cdb_length, csio->dxfer_len, ap->ap_channel,
ap->ap_scsi_id, ap->ap_logical_drive_no);
}
ac->ac_flags |= AMR_CMD_CCB;
ac->ac_data = csio->data_ptr;
ac->ac_length = csio->dxfer_len;
if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_IN)
ac->ac_flags |= AMR_CMD_DATAIN;
if ((csio->ccb_h.flags & CAM_DIR_MASK) == CAM_DIR_OUT)
ac->ac_flags |= AMR_CMD_DATAOUT;
ac->ac_private = csio;
ac->ac_complete = amr_cam_complete;
if ( sc->support_ext_cdb ) {
ac->ac_mailbox.mb_command = AMR_CMD_EXTPASS;
} else {
ac->ac_mailbox.mb_command = AMR_CMD_PASS;
}
out:
if (error != 0) {
if (ac != NULL)
amr_releasecmd(ac);
if (csio != NULL)
/* put it back and try again later */
amr_requeue_ccb(sc, (union ccb *)csio);
}
*acp = ac;
return(error);
}
/***********************************************************************
* Check for interrupt status
*/
static void
amr_cam_poll(struct cam_sim *sim)
{
amr_done(cam_sim_softc(sim));
}
/**********************************************************************
* Handle completion of a command submitted via CAM.
*/
static void
amr_cam_complete(struct amr_command *ac)
{
struct amr_passthrough *ap;
struct amr_ext_passthrough *aep;
struct ccb_scsiio *csio;
struct scsi_inquiry_data *inq;
int scsi_status, cdb0;
ap = &ac->ac_ccb->ccb_pthru;
aep = &ac->ac_ccb->ccb_epthru;
csio = (struct ccb_scsiio *)ac->ac_private;
inq = (struct scsi_inquiry_data *)csio->data_ptr;
if (ac->ac_mailbox.mb_command == AMR_CMD_EXTPASS)
scsi_status = aep->ap_scsi_status;
else
scsi_status = ap->ap_scsi_status;
debug(1, "status 0x%x AP scsi_status 0x%x", ac->ac_status,
scsi_status);
/* Make sure the status is sane */
if ((ac->ac_status != AMR_STATUS_SUCCESS) && (scsi_status == 0)) {
csio->ccb_h.status = CAM_REQ_CMP_ERR;
goto out;
}
/*
* Hide disks from CAM so that they're not picked up and treated as
* 'normal' disks.
*
* If the configuration provides a mechanism to mark a disk a "not
* managed", we could add handling for that to allow disks to be
* selectively visible.
*/
/* handle passthrough SCSI status */
switch(scsi_status) {
case 0: /* completed OK */
if (ac->ac_mailbox.mb_command == AMR_CMD_EXTPASS)
cdb0 = aep->ap_cdb[0];
else
cdb0 = ap->ap_cdb[0];
if ((cdb0 == INQUIRY) && (SID_TYPE(inq) == T_DIRECT))
inq->device = (inq->device & 0xe0) | T_NODEVICE;
csio->ccb_h.status = CAM_REQ_CMP;
break;
case 0x02:
csio->ccb_h.status = CAM_SCSI_STATUS_ERROR;
csio->scsi_status = SCSI_STATUS_CHECK_COND;
if (ac->ac_mailbox.mb_command == AMR_CMD_EXTPASS)
bcopy(aep->ap_request_sense_area, &csio->sense_data,
AMR_MAX_REQ_SENSE_LEN);
else
bcopy(ap->ap_request_sense_area, &csio->sense_data,
AMR_MAX_REQ_SENSE_LEN);
csio->sense_len = AMR_MAX_REQ_SENSE_LEN;
csio->ccb_h.status |= CAM_AUTOSNS_VALID;
break;
case 0x08:
csio->ccb_h.status = CAM_SCSI_BUSY;
break;
case 0xf0:
case 0xf4:
default:
/*
* Non-zero LUNs are already filtered, so there's no need
* to return CAM_DEV_NOT_THERE.
*/
csio->ccb_h.status = CAM_SEL_TIMEOUT;
break;
}
out:
if ((csio->ccb_h.flags & CAM_DIR_MASK) != CAM_DIR_NONE)
debug(2, "%*D\n", imin(csio->dxfer_len, 16), csio->data_ptr,
" ");
mtx_lock(&ac->ac_sc->amr_list_lock);
xpt_done((union ccb *)csio);
amr_releasecmd(ac);
mtx_unlock(&ac->ac_sc->amr_list_lock);
}
Reference in New Issue View Git Blame Copy Permalink