freebsd-skq/sys/x86/include/segments.h
Marcel Moolenaar e7d939bda2 Remove ia64.
This includes:
o   All directories named *ia64*
o   All files named *ia64*
o   All ia64-specific code guarded by __ia64__
o   All ia64-specific makefile logic
o   Mention of ia64 in comments and documentation

This excludes:
o   Everything under contrib/
o   Everything under crypto/
o   sys/xen/interface
o   sys/sys/elf_common.h

Discussed at: BSDcan
2014-07-07 00:27:09 +00:00

288 lines
11 KiB
C

/*-
* Copyright (c) 1989, 1990 William F. Jolitz
* Copyright (c) 1990 The Regents of the University of California.
* All rights reserved.
*
* This code is derived from software contributed to Berkeley by
* William Jolitz.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* from: @(#)segments.h 7.1 (Berkeley) 5/9/91
* $FreeBSD$
*/
#ifndef _X86_SEGMENTS_H_
#define _X86_SEGMENTS_H_
/*
* X86 Segmentation Data Structures and definitions
*/
/*
* Selectors
*/
#define SEL_RPL_MASK 3 /* requester priv level */
#define ISPL(s) ((s)&3) /* priority level of a selector */
#ifdef XEN
#define SEL_KPL 1 /* kernel priority level */
#else
#define SEL_KPL 0 /* kernel priority level */
#endif
#define SEL_UPL 3 /* user priority level */
#define ISLDT(s) ((s)&SEL_LDT) /* is it local or global */
#define SEL_LDT 4 /* local descriptor table */
#define IDXSEL(s) (((s)>>3) & 0x1fff) /* index of selector */
#define LSEL(s,r) (((s)<<3) | SEL_LDT | r) /* a local selector */
#define GSEL(s,r) (((s)<<3) | r) /* a global selector */
/*
* User segment descriptors (%cs, %ds etc for i386 apps. 64 bit wide)
* For long-mode apps, %cs only has the conforming bit in sd_type, the sd_dpl,
* sd_p, sd_l and sd_def32 which must be zero). %ds only has sd_p.
*/
struct segment_descriptor {
unsigned sd_lolimit:16; /* segment extent (lsb) */
unsigned sd_lobase:24; /* segment base address (lsb) */
unsigned sd_type:5; /* segment type */
unsigned sd_dpl:2; /* segment descriptor priority level */
unsigned sd_p:1; /* segment descriptor present */
unsigned sd_hilimit:4; /* segment extent (msb) */
unsigned sd_xx:2; /* unused */
unsigned sd_def32:1; /* default 32 vs 16 bit size */
unsigned sd_gran:1; /* limit granularity (byte/page units)*/
unsigned sd_hibase:8; /* segment base address (msb) */
} __packed;
struct user_segment_descriptor {
unsigned sd_lolimit:16; /* segment extent (lsb) */
unsigned sd_lobase:24; /* segment base address (lsb) */
unsigned sd_type:5; /* segment type */
unsigned sd_dpl:2; /* segment descriptor priority level */
unsigned sd_p:1; /* segment descriptor present */
unsigned sd_hilimit:4; /* segment extent (msb) */
unsigned sd_xx:1; /* unused */
unsigned sd_long:1; /* long mode (cs only) */
unsigned sd_def32:1; /* default 32 vs 16 bit size */
unsigned sd_gran:1; /* limit granularity (byte/page units)*/
unsigned sd_hibase:8; /* segment base address (msb) */
} __packed;
#define USD_GETBASE(sd) (((sd)->sd_lobase) | (sd)->sd_hibase << 24)
#define USD_SETBASE(sd, b) (sd)->sd_lobase = (b); \
(sd)->sd_hibase = ((b) >> 24);
#define USD_GETLIMIT(sd) (((sd)->sd_lolimit) | (sd)->sd_hilimit << 16)
#define USD_SETLIMIT(sd, l) (sd)->sd_lolimit = (l); \
(sd)->sd_hilimit = ((l) >> 16);
#ifdef __i386__
/*
* Gate descriptors (e.g. indirect descriptors)
*/
struct gate_descriptor {
unsigned gd_looffset:16; /* gate offset (lsb) */
unsigned gd_selector:16; /* gate segment selector */
unsigned gd_stkcpy:5; /* number of stack wds to cpy */
unsigned gd_xx:3; /* unused */
unsigned gd_type:5; /* segment type */
unsigned gd_dpl:2; /* segment descriptor priority level */
unsigned gd_p:1; /* segment descriptor present */
unsigned gd_hioffset:16; /* gate offset (msb) */
} __packed;
/*
* Generic descriptor
*/
union descriptor {
struct segment_descriptor sd;
struct gate_descriptor gd;
};
#else
/*
* Gate descriptors (e.g. indirect descriptors, trap, interrupt etc. 128 bit)
* Only interrupt and trap gates have gd_ist.
*/
struct gate_descriptor {
uint64_t gd_looffset:16; /* gate offset (lsb) */
uint64_t gd_selector:16; /* gate segment selector */
uint64_t gd_ist:3; /* IST table index */
uint64_t gd_xx:5; /* unused */
uint64_t gd_type:5; /* segment type */
uint64_t gd_dpl:2; /* segment descriptor priority level */
uint64_t gd_p:1; /* segment descriptor present */
uint64_t gd_hioffset:48; /* gate offset (msb) */
uint64_t sd_xx1:32;
} __packed;
/*
* Generic descriptor
*/
union descriptor {
struct user_segment_descriptor sd;
struct gate_descriptor gd;
};
#endif
/* system segments and gate types */
#define SDT_SYSNULL 0 /* system null */
#define SDT_SYS286TSS 1 /* system 286 TSS available */
#define SDT_SYSLDT 2 /* system local descriptor table */
#define SDT_SYS286BSY 3 /* system 286 TSS busy */
#define SDT_SYS286CGT 4 /* system 286 call gate */
#define SDT_SYSTASKGT 5 /* system task gate */
#define SDT_SYS286IGT 6 /* system 286 interrupt gate */
#define SDT_SYS286TGT 7 /* system 286 trap gate */
#define SDT_SYSNULL2 8 /* system null again */
#define SDT_SYS386TSS 9 /* system 386 TSS available */
#define SDT_SYSTSS 9 /* system available 64 bit TSS */
#define SDT_SYSNULL3 10 /* system null again */
#define SDT_SYS386BSY 11 /* system 386 TSS busy */
#define SDT_SYSBSY 11 /* system busy 64 bit TSS */
#define SDT_SYS386CGT 12 /* system 386 call gate */
#define SDT_SYSCGT 12 /* system 64 bit call gate */
#define SDT_SYSNULL4 13 /* system null again */
#define SDT_SYS386IGT 14 /* system 386 interrupt gate */
#define SDT_SYSIGT 14 /* system 64 bit interrupt gate */
#define SDT_SYS386TGT 15 /* system 386 trap gate */
#define SDT_SYSTGT 15 /* system 64 bit trap gate */
/* memory segment types */
#define SDT_MEMRO 16 /* memory read only */
#define SDT_MEMROA 17 /* memory read only accessed */
#define SDT_MEMRW 18 /* memory read write */
#define SDT_MEMRWA 19 /* memory read write accessed */
#define SDT_MEMROD 20 /* memory read only expand dwn limit */
#define SDT_MEMRODA 21 /* memory read only expand dwn limit accessed */
#define SDT_MEMRWD 22 /* memory read write expand dwn limit */
#define SDT_MEMRWDA 23 /* memory read write expand dwn limit accessed*/
#define SDT_MEME 24 /* memory execute only */
#define SDT_MEMEA 25 /* memory execute only accessed */
#define SDT_MEMER 26 /* memory execute read */
#define SDT_MEMERA 27 /* memory execute read accessed */
#define SDT_MEMEC 28 /* memory execute only conforming */
#define SDT_MEMEAC 29 /* memory execute only accessed conforming */
#define SDT_MEMERC 30 /* memory execute read conforming */
#define SDT_MEMERAC 31 /* memory execute read accessed conforming */
/*
* Size of IDT table
*/
#define NIDT 256 /* 32 reserved, 0x80 syscall, most are h/w */
#define NRSVIDT 32 /* reserved entries for cpu exceptions */
/*
* Entries in the Interrupt Descriptor Table (IDT)
*/
#define IDT_DE 0 /* #DE: Divide Error */
#define IDT_DB 1 /* #DB: Debug */
#define IDT_NMI 2 /* Nonmaskable External Interrupt */
#define IDT_BP 3 /* #BP: Breakpoint */
#define IDT_OF 4 /* #OF: Overflow */
#define IDT_BR 5 /* #BR: Bound Range Exceeded */
#define IDT_UD 6 /* #UD: Undefined/Invalid Opcode */
#define IDT_NM 7 /* #NM: No Math Coprocessor */
#define IDT_DF 8 /* #DF: Double Fault */
#define IDT_FPUGP 9 /* Coprocessor Segment Overrun */
#define IDT_TS 10 /* #TS: Invalid TSS */
#define IDT_NP 11 /* #NP: Segment Not Present */
#define IDT_SS 12 /* #SS: Stack Segment Fault */
#define IDT_GP 13 /* #GP: General Protection Fault */
#define IDT_PF 14 /* #PF: Page Fault */
#define IDT_MF 16 /* #MF: FPU Floating-Point Error */
#define IDT_AC 17 /* #AC: Alignment Check */
#define IDT_MC 18 /* #MC: Machine Check */
#define IDT_XF 19 /* #XF: SIMD Floating-Point Exception */
#define IDT_IO_INTS NRSVIDT /* Base of IDT entries for I/O interrupts. */
#define IDT_SYSCALL 0x80 /* System Call Interrupt Vector */
#define IDT_DTRACE_RET 0x92 /* DTrace pid provider Interrupt Vector */
#define IDT_EVTCHN 0x93 /* Xen HVM Event Channel Interrupt Vector */
#if defined(__i386__)
/*
* Entries in the Global Descriptor Table (GDT)
* Note that each 4 entries share a single 32 byte L1 cache line.
* Some of the fast syscall instructions require a specific order here.
*/
#define GNULL_SEL 0 /* Null Descriptor */
#define GPRIV_SEL 1 /* SMP Per-Processor Private Data */
#define GUFS_SEL 2 /* User %fs Descriptor (order critical: 1) */
#define GUGS_SEL 3 /* User %gs Descriptor (order critical: 2) */
#define GCODE_SEL 4 /* Kernel Code Descriptor (order critical: 1) */
#define GDATA_SEL 5 /* Kernel Data Descriptor (order critical: 2) */
#define GUCODE_SEL 6 /* User Code Descriptor (order critical: 3) */
#define GUDATA_SEL 7 /* User Data Descriptor (order critical: 4) */
#define GBIOSLOWMEM_SEL 8 /* BIOS low memory access (must be entry 8) */
#define GPROC0_SEL 9 /* Task state process slot zero and up */
#define GLDT_SEL 10 /* Default User LDT */
#define GUSERLDT_SEL 11 /* User LDT */
#define GPANIC_SEL 12 /* Task state to consider panic from */
#define GBIOSCODE32_SEL 13 /* BIOS interface (32bit Code) */
#define GBIOSCODE16_SEL 14 /* BIOS interface (16bit Code) */
#define GBIOSDATA_SEL 15 /* BIOS interface (Data) */
#define GBIOSUTIL_SEL 16 /* BIOS interface (Utility) */
#define GBIOSARGS_SEL 17 /* BIOS interface (Arguments) */
#define GNDIS_SEL 18 /* For the NDIS layer */
#ifdef XEN
#define NGDT 9
#else
#define NGDT 19
#endif
/*
* Entries in the Local Descriptor Table (LDT)
*/
#define LSYS5CALLS_SEL 0 /* forced by intel BCS */
#define LSYS5SIGR_SEL 1
#define L43BSDCALLS_SEL 2 /* notyet */
#define LUCODE_SEL 3
#define LSOL26CALLS_SEL 4 /* Solaris >= 2.6 system call gate */
#define LUDATA_SEL 5
/* separate stack, es,fs,gs sels ? */
/* #define LPOSIXCALLS_SEL 5*/ /* notyet */
#define LBSDICALLS_SEL 16 /* BSDI system call gate */
#define NLDT (LBSDICALLS_SEL + 1)
#else /* !__i386__ */
/*
* Entries in the Global Descriptor Table (GDT)
*/
#define GNULL_SEL 0 /* Null Descriptor */
#define GNULL2_SEL 1 /* Null Descriptor */
#define GUFS32_SEL 2 /* User 32 bit %fs Descriptor */
#define GUGS32_SEL 3 /* User 32 bit %gs Descriptor */
#define GCODE_SEL 4 /* Kernel Code Descriptor */
#define GDATA_SEL 5 /* Kernel Data Descriptor */
#define GUCODE32_SEL 6 /* User 32 bit code Descriptor */
#define GUDATA_SEL 7 /* User 32/64 bit Data Descriptor */
#define GUCODE_SEL 8 /* User 64 bit Code Descriptor */
#define GPROC0_SEL 9 /* TSS for entering kernel etc */
/* slot 10 is second half of GPROC0_SEL */
#define GUSERLDT_SEL 11 /* LDT */
/* slot 12 is second half of GUSERLDT_SEL */
#define NGDT 13
#endif /* __i386__ */
#endif /* !_X86_SEGMENTS_H_ */