Nate Lawson c38b150ae4 New SCSI target emulator code ... This code allows a user program to enable target mode on a SIM and then emulate any number of devices (disks, tape drives, etc.) All decisions about device behavior (UA, CA, inquiry response) are left to the usermode program and the kernel driver is merely a conduit for CCBs. This enables multiple concurrent target emulators, each using its own backing store and IO model. Also included is a user program that emulates a disk (RBC) using a file as a backing store. This provides functionality similar to md(4) at the CAM layer. Code has been tested on ahc(4) and should also work on isp(4) (and other SIMs that gain target mode support). It is a complete rewrite of /sys/cam/scsi_target* and /usr/share/examples/scsi_target. Design, comments from: gibbs Supported by: Cryptography Research Approved by: re		2002-11-22 22:55:51 +00:00
..
scsi	New SCSI target emulator code	2002-11-22 22:55:51 +00:00
cam_ccb.h	Add a transport settings variant for Fibre Channel.	2001-06-24 18:17:45 +00:00
cam_debug.h	Rewrite of the CAM error recovery code.	2001-03-27 05:45:52 +00:00
cam_periph.c	Panic message strings do not need a trailing \n.	2002-11-14 05:35:57 +00:00
cam_periph.h	Change the peripheral driver list from a linker set to module driven	2001-02-07 07:05:59 +00:00
cam_queue.c
cam_queue.h	Back out the previous change to the queue(3) interface.	2000-05-26 02:09:24 +00:00
cam_sim.c	Const'ify cam_sim.sim_name to quiet warnings.	2001-01-24 01:46:18 +00:00
cam_sim.h	Const'ify cam_sim.sim_name to quiet warnings.	2001-01-24 01:46:18 +00:00
cam_xpt_periph.h
cam_xpt_sim.h	Clean up the xpt_sim creation to mirror how HBA drivers perform this task.	2000-01-14 23:08:46 +00:00
cam_xpt.c	Note that the large Hitachi's are also CAM_QUIRK_HILUNS	2002-09-23 04:55:32 +00:00
cam_xpt.h	Rewrite of the CAM error recovery code.	2001-03-27 05:45:52 +00:00
cam.c	Define the kern.cam sysctl in the cam layer, rather than multiply in several	2002-01-09 03:39:04 +00:00
cam.h	Define the kern.cam sysctl in the cam layer, rather than multiply in several	2002-01-09 03:39:04 +00:00