c3be8da3c6
#include <i386/include/clock.h> to get sysbeep() prototype pcic.c: add appropriate #ifdef around a prototype to quiet GCC because fn decl. is also #ifdef'd.
864 lines
20 KiB
C
864 lines
20 KiB
C
/*
|
|
* Intel PCIC or compatible Controller driver
|
|
* May be built using LKM to make a loadable module.
|
|
*-------------------------------------------------------------------------
|
|
*
|
|
* Copyright (c) 1995 Andrew McRae. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifdef LKM
|
|
#define NPCIC 1
|
|
#else
|
|
#include "pcic.h"
|
|
#endif
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/errno.h>
|
|
#include <sys/file.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/proc.h>
|
|
#include <sys/ioctl.h>
|
|
#include <sys/mount.h>
|
|
#include <sys/sysent.h>
|
|
#include <sys/exec.h>
|
|
#include <sys/lkm.h>
|
|
#include <sys/devconf.h>
|
|
|
|
#include <machine/clock.h>
|
|
|
|
#include <i386/isa/isa.h>
|
|
#include <i386/isa/isa_device.h>
|
|
#include <i386/isa/icu.h>
|
|
|
|
#include <pccard/i82365.h>
|
|
#include <pccard/card.h>
|
|
#include <pccard/driver.h>
|
|
#include <pccard/slot.h>
|
|
|
|
#include <i386/include/laptops.h>
|
|
|
|
extern struct kern_devconf kdc_pccard0;
|
|
|
|
struct kern_devconf kdc_pcic[PCIC_MAX_SLOTS] = {
|
|
{
|
|
0, 0, 0, /* filled in by dev_attach */
|
|
"pcic", 0, { MDDT_BUS, 0 },
|
|
0, 0, 0, BUS_EXTERNALLEN,
|
|
&kdc_pccard0, /* parent is the CPU */
|
|
0, /* no parentdata */
|
|
DC_UNKNOWN,
|
|
"PCMCIA or PCCARD slot",
|
|
DC_CLS_BUS /* class */
|
|
}
|
|
};
|
|
|
|
/*
|
|
* Prototypes for interrupt handler.
|
|
*/
|
|
static void pcicintr __P((int unit));
|
|
static int pcic_ioctl __P((struct slot *, int, caddr_t));
|
|
static int pcic_power __P((struct slot *));
|
|
static timeout_t pcic_reset;
|
|
static void pcic_disable __P((struct slot *));
|
|
static void pcic_mapirq __P((struct slot *, int));
|
|
static timeout_t pcictimeout;
|
|
#ifdef LKM
|
|
static int pcic_handle __P((struct lkm_table *lkmtp, int cmd));
|
|
#endif
|
|
static int pcic_memory(struct slot *, int);
|
|
static int pcic_io(struct slot *, int);
|
|
|
|
/*
|
|
* Per-slot data table.
|
|
*/
|
|
static struct pcic_slot {
|
|
int slot; /* My slot number */
|
|
int index; /* Index register */
|
|
int data; /* Data register */
|
|
int offset; /* Offset value for index */
|
|
char controller; /* Device type */
|
|
char revision; /* Device Revision */
|
|
struct slot *slotp; /* Back ptr to slot */
|
|
} pcic_slots[PCIC_MAX_SLOTS];
|
|
|
|
static int pcic_irq;
|
|
static unsigned pcic_imask;
|
|
static struct slot_ctrl cinfo;
|
|
|
|
|
|
/*
|
|
* Internal inline functions for accessing the PCIC.
|
|
*/
|
|
/*
|
|
* Read a register from the PCIC.
|
|
*/
|
|
static inline unsigned char
|
|
getb (struct pcic_slot *sp, int reg)
|
|
{
|
|
outb (sp->index, sp->offset + reg);
|
|
return inb (sp->data);
|
|
}
|
|
|
|
/*
|
|
* Write a register on the PCIC
|
|
*/
|
|
static inline void
|
|
putb (struct pcic_slot *sp, int reg, unsigned char val)
|
|
{
|
|
outb (sp->index, sp->offset + reg);
|
|
outb (sp->data, val);
|
|
}
|
|
/*
|
|
* Clear bit(s) of a register.
|
|
*/
|
|
static inline void
|
|
clrb(struct pcic_slot *sp, int reg, unsigned char mask)
|
|
{
|
|
putb (sp, reg, getb (sp, reg) & ~mask);
|
|
}
|
|
/*
|
|
* Set bit(s) of a register
|
|
*/
|
|
static inline void
|
|
setb(struct pcic_slot *sp, int reg, unsigned char mask)
|
|
{
|
|
putb (sp, reg, getb (sp, reg) | mask);
|
|
}
|
|
|
|
/*
|
|
* Write a 16 bit value to 2 adjacent PCIC registers
|
|
*/
|
|
static inline void
|
|
putw (struct pcic_slot *sp, int reg, unsigned short word)
|
|
{
|
|
putb (sp, reg, word & 0xFF);
|
|
putb (sp, reg + 1, (word >> 8) & 0xff);
|
|
}
|
|
|
|
|
|
/*
|
|
* Loadable kernel module interface.
|
|
*/
|
|
#ifdef LKM
|
|
/*
|
|
* This defines the lkm_misc module use by modload
|
|
* to define the module name.
|
|
*/
|
|
MOD_MISC(pcic);
|
|
|
|
/*
|
|
* Module handler that processes loads and unloads.
|
|
* Once the module is loaded, the probe routine
|
|
* is called to install the slots (if any).
|
|
*/
|
|
|
|
static int
|
|
pcic_handle(struct lkm_table *lkmtp, int cmd)
|
|
{
|
|
int err = 0; /* default = success*/
|
|
|
|
switch( cmd) {
|
|
case LKM_E_LOAD:
|
|
|
|
/*
|
|
* Don't load twice! (lkmexists() is exported by kern_lkm.c)
|
|
*/
|
|
if( lkmexists( lkmtp))
|
|
return( EEXIST);
|
|
/*
|
|
* Call the probe routine to find the slots. If
|
|
* no slots exist, then don't bother loading the module.
|
|
*/
|
|
if (pcic_probe() == 0)
|
|
return(ENODEV);
|
|
break; /* Success*/
|
|
/*
|
|
* Attempt to unload the slot driver.
|
|
*/
|
|
case LKM_E_UNLOAD:
|
|
printf("Unloading PCIC driver\n");
|
|
err = pcic_unload(lkmtp, cmd);
|
|
break; /* Success*/
|
|
|
|
default: /* we only understand load/unload*/
|
|
err = EINVAL;
|
|
break;
|
|
}
|
|
|
|
return( err);
|
|
}
|
|
|
|
/*
|
|
* External entry point; should generally match name of .o file. The
|
|
* arguments are always the same for all loaded modules. The "load",
|
|
* "unload", and "stat" functions in "DISPATCH" will be called under
|
|
* their respective circumstances unless their value is "lkm_nullcmd".
|
|
* If called, they are called with the same arguments (cmd is included to
|
|
* allow the use of a single function, ver is included for version
|
|
* matching between modules and the kernel loader for the modules).
|
|
*
|
|
* Since we expect to link in the kernel and add external symbols to
|
|
* the kernel symbol name space in a future version, generally all
|
|
* functions used in the implementation of a particular module should
|
|
* be static unless they are expected to be seen in other modules or
|
|
* to resolve unresolved symbols alread existing in the kernel (the
|
|
* second case is not likely to ever occur).
|
|
*
|
|
* The entry point should return 0 unless it is refusing load (in which
|
|
* case it should return an errno from errno.h).
|
|
*/
|
|
int
|
|
pcic_mod(struct lkm_table *lkmtp, int cmd, int ver)
|
|
{
|
|
DISPATCH(lkmtp,cmd,ver,pcic_handle,pcic_handle,lkm_nullcmd);
|
|
}
|
|
|
|
/*
|
|
* pcic_unload - Called when unloading a LKM.
|
|
* Disables interrupts and resets PCIC.
|
|
*/
|
|
static int
|
|
pcic_unload(struct lkm_table *lkmtp, int cmd)
|
|
{
|
|
int slot;
|
|
struct pcic_slot *sp = pcic_slots;
|
|
|
|
untimeout(pcictimeout,0);
|
|
if (pcic_irq) {
|
|
for (slot = 0; slot < PCIC_MAX_SLOTS; slot++, sp++) {
|
|
if (sp->slotp)
|
|
putb(sp, PCIC_STAT_INT, 0);
|
|
kdc_pcic[slot].kdc_state = DC_UNCONFIGURED;
|
|
}
|
|
unregister_intr(pcic_irq, pcicintr);
|
|
}
|
|
pccard_remove_controller(&cinfo);
|
|
return(0);
|
|
}
|
|
|
|
#endif /* LKM */
|
|
|
|
#if 0
|
|
static void
|
|
pcic_dump_attributes (unsigned char *scratch, int maxlen)
|
|
{
|
|
int i,j,k;
|
|
|
|
i = 0;
|
|
while (scratch[i] != 0xff && i < maxlen) {
|
|
unsigned char link = scratch[i+2];
|
|
|
|
/*
|
|
* Dump attribute memory
|
|
*/
|
|
if (scratch[i]) {
|
|
printf ("[%02x] ", i);
|
|
for (j = 0; j < 2 * link + 4 && j < 128; j += 2)
|
|
printf ("%02x ", scratch[j + i]);
|
|
printf ("\n");
|
|
}
|
|
i += 4 + 2 * link;
|
|
}
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* entry point from main code to map/unmap memory context.
|
|
*/
|
|
static int
|
|
pcic_memory(struct slot *slotp, int win)
|
|
{
|
|
struct pcic_slot *sp = slotp->cdata;
|
|
struct mem_desc *mp = &slotp->mem[win];
|
|
int reg = mp->window * PCIC_MEMSIZE + PCIC_MEMBASE;
|
|
|
|
if (mp->flags & MDF_ACTIVE)
|
|
{
|
|
unsigned long sys_addr = (unsigned long)mp->start >> 12;
|
|
/*
|
|
* Write the addresses, card offsets and length.
|
|
* The values are all stored as the upper 12 bits of the
|
|
* 24 bit address i.e everything is allocated as 4 Kb chunks.
|
|
*/
|
|
putw (sp, reg, sys_addr & 0xFFF);
|
|
putw (sp, reg+2, (sys_addr + (mp->size >> 12) - 1) & 0xFFF);
|
|
putw (sp, reg+4, ((mp->card >> 12) - sys_addr) & 0x3FFF);
|
|
#if 0
|
|
printf("card offs = card_adr = 0x%x 0x%x, sys_addr = 0x%x\n",
|
|
mp->card, ((mp->card >> 12) - sys_addr) & 0x3FFF,
|
|
sys_addr);
|
|
#endif
|
|
/*
|
|
* Each 16 bit register has some flags in the upper bits.
|
|
*/
|
|
if (mp->flags & MDF_16BITS)
|
|
setb(sp, reg+1, PCIC_DATA16);
|
|
if (mp->flags & MDF_ZEROWS)
|
|
setb(sp, reg+1, PCIC_ZEROWS);
|
|
if (mp->flags & MDF_WS0)
|
|
setb(sp, reg+3, PCIC_MW0);
|
|
if (mp->flags & MDF_WS1)
|
|
setb(sp, reg+3, PCIC_MW1);
|
|
if (mp->flags & MDF_ATTR)
|
|
setb(sp, reg+5, PCIC_REG);
|
|
if (mp->flags & MDF_WP)
|
|
setb(sp, reg+5, PCIC_WP);
|
|
#if 0
|
|
printf("Slot number %d, reg 0x%x, offs 0x%x\n",
|
|
sp->slot, reg, sp->offset);
|
|
printf("Map window to sys addr 0x%x for %d bytes, card 0x%x\n",
|
|
mp->start, mp->size, mp->card);
|
|
printf("regs are: 0x%02x%02x 0x%02x%02x 0x%02x%02x flags 0x%x\n",
|
|
getb(sp, reg), getb(sp, reg+1),
|
|
getb(sp, reg+2), getb(sp, reg+3),
|
|
getb(sp, reg+4), getb(sp, reg+5),
|
|
mp->flags);
|
|
#endif
|
|
/*
|
|
* Enable the memory window. By experiment, we need a delay.
|
|
*/
|
|
setb (sp, PCIC_ADDRWINE, (1<<win) | PCIC_MEMCS16);
|
|
DELAY(50);
|
|
}
|
|
else
|
|
{
|
|
#if 0
|
|
printf("Unmapping window %d\n", win);
|
|
#endif
|
|
clrb (sp, PCIC_ADDRWINE, 1<<win);
|
|
putw (sp, reg, 0);
|
|
putw (sp, reg+2, 0);
|
|
putw (sp, reg+4, 0);
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* pcic_io - map or unmap I/O context
|
|
*/
|
|
static int
|
|
pcic_io(struct slot *slotp, int win)
|
|
{
|
|
int mask, reg;
|
|
struct pcic_slot *sp = slotp->cdata;
|
|
struct io_desc *ip = &slotp->io[win];
|
|
|
|
switch (win) {
|
|
case 0:
|
|
mask = PCIC_IO0_EN;
|
|
reg = PCIC_IO0;
|
|
break;
|
|
case 1:
|
|
mask = PCIC_IO1_EN;
|
|
reg = PCIC_IO1;
|
|
break;
|
|
default:
|
|
panic("Illegal PCIC I/O window request!");
|
|
}
|
|
if (ip->flags & IODF_ACTIVE) {
|
|
unsigned char x, ioctlv;
|
|
|
|
#ifdef PCIC_DEBUG
|
|
printf("Map I/O 0x%x (size 0x%x) on Window %d\n", ip->start, ip->size, win);
|
|
#endif /* PCIC_DEBUG */
|
|
putw (sp, reg, ip->start);
|
|
putw (sp, reg+2, ip->start+ip->size-1);
|
|
x = 0;
|
|
if (ip->flags & IODF_ZEROWS)
|
|
x |= PCIC_IO_0WS;
|
|
if (ip->flags & IODF_WS)
|
|
x |= PCIC_IO_WS;
|
|
if (ip->flags & IODF_CS16)
|
|
x |= PCIC_IO_CS16;
|
|
if (ip->flags & IODF_16BIT)
|
|
x |= PCIC_IO_16BIT;
|
|
/*
|
|
* Extract the current flags and merge with new flags.
|
|
* Flags for window 0 in lower nybble, and in upper nybble
|
|
* for window 1.
|
|
*/
|
|
ioctlv = getb(sp, PCIC_IOCTL);
|
|
DELAY(100);
|
|
switch (win) {
|
|
case 0:
|
|
putb(sp, PCIC_IOCTL, x | (ioctlv & 0xf0));
|
|
break;
|
|
case 1:
|
|
putb(sp, PCIC_IOCTL, (x << 4) | (ioctlv & 0xf));
|
|
break;
|
|
}
|
|
DELAY(100);
|
|
setb (sp, PCIC_ADDRWINE, mask);
|
|
DELAY(100);
|
|
} else {
|
|
clrb (sp, PCIC_ADDRWINE, mask);
|
|
DELAY(100);
|
|
putw (sp, reg, 0);
|
|
putw (sp, reg + 2, 0);
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* Look for an Intel PCIC (or compatible).
|
|
* For each available slot, allocate a PC-CARD slot.
|
|
*/
|
|
|
|
/*
|
|
* VLSI 82C146 has incompatibilities about the I/O address
|
|
* of slot 1. If it's the only PCIC whose vendor ID is 0x84,
|
|
* I want to remove this #define and corresponding #ifdef's.
|
|
* HOSOKAWA, Tatsumi <hosokawa@mt.cs.keio.ac.jp>
|
|
*/
|
|
#define VLSI_SLOT1 1
|
|
|
|
int
|
|
pcic_probe ()
|
|
{
|
|
int slot, i, validslots = 0;
|
|
struct slot *slotp;
|
|
struct pcic_slot *sp;
|
|
unsigned char c;
|
|
#ifdef VLSI_SLOT1
|
|
static int vs = 0;
|
|
#endif /* VLSI_SLOT1 */
|
|
|
|
/*
|
|
* Initialise controller information structure.
|
|
*/
|
|
cinfo.mapmem = pcic_memory;
|
|
cinfo.mapio = pcic_io;
|
|
cinfo.ioctl = pcic_ioctl;
|
|
cinfo.power = pcic_power;
|
|
cinfo.mapirq = pcic_mapirq;
|
|
cinfo.reset = pcic_reset;
|
|
cinfo.disable = pcic_disable;
|
|
cinfo.maxmem = PCIC_MEM_WIN;
|
|
cinfo.maxio = PCIC_IO_WIN;
|
|
cinfo.irqs = PCIC_INT_MASK_ALLOWED;
|
|
|
|
#ifdef LKM
|
|
bzero(pcic_slots, sizeof(pcic_slots));
|
|
#endif
|
|
sp = pcic_slots;
|
|
for (slot = 0; slot < PCIC_MAX_SLOTS; slot++, sp++) {
|
|
/*
|
|
* Initialise the PCIC slot table.
|
|
*/
|
|
if (slot < 4) {
|
|
#ifdef VLSI_SLOT1
|
|
if (slot == 1 && vs) {
|
|
sp->index = PCIC_INDEX_0 + 4;
|
|
sp->data = PCIC_DATA_0 + 4;
|
|
sp->offset = PCIC_SLOT_SIZE << 1;
|
|
} else {
|
|
sp->index = PCIC_INDEX_0;
|
|
sp->data = PCIC_DATA_0;
|
|
sp->offset = slot * PCIC_SLOT_SIZE;
|
|
}
|
|
#else /* VLSI_SLOT1 */
|
|
sp->index = PCIC_INDEX_0;
|
|
sp->data = PCIC_DATA_0;
|
|
sp->offset = slot * PCIC_SLOT_SIZE;
|
|
#endif /* VLSI_SLOT1 */
|
|
} else {
|
|
sp->index = PCIC_INDEX_1;
|
|
sp->data = PCIC_DATA_1;
|
|
sp->offset = (slot - 4) * PCIC_SLOT_SIZE;
|
|
}
|
|
/*
|
|
* see if there's a PCMCIA controller here
|
|
* Intel PCMCIA controllers use 0x82 and 0x83
|
|
* IBM clone chips use 0x88 and 0x89, apparently
|
|
*/
|
|
c = getb (sp, PCIC_ID_REV);
|
|
sp->revision = -1;
|
|
switch(c) {
|
|
/*
|
|
* 82365 or clones.
|
|
*/
|
|
case 0x82:
|
|
case 0x83:
|
|
sp->controller = PCIC_I82365;
|
|
sp->revision = c & 1;
|
|
/*
|
|
* Now check for VADEM chips.
|
|
*/
|
|
outb(sp->index, 0x0E);
|
|
outb(sp->index, 0x37);
|
|
setb(sp, 0x3A, 0x40);
|
|
c = getb (sp, PCIC_ID_REV);
|
|
if (c & 0x08) {
|
|
sp->controller = ((sp->revision = c & 7) == 4) ?
|
|
PCIC_VG469 : PCIC_VG468 ;
|
|
clrb(sp, 0x3A, 0x40);
|
|
}
|
|
|
|
/*
|
|
* Check for RICOH RF5C396 PCMCIA Controller
|
|
*/
|
|
c = getb (sp, 0x3a);
|
|
if (c == 0xb2) {
|
|
sp->controller = PCIC_RF5C396;
|
|
}
|
|
|
|
break;
|
|
/*
|
|
* VLSI chips.
|
|
*/
|
|
case 0x84:
|
|
sp->controller = PCIC_VLSI;
|
|
#ifdef VLSI_SLOT1
|
|
vs = 1;
|
|
#endif /* VLSI_SLOT1 */
|
|
break;
|
|
case 0x88:
|
|
case 0x89:
|
|
sp->controller = PCIC_IBM;
|
|
sp->revision = c & 1;
|
|
break;
|
|
case 0x8a:
|
|
sp->controller = PCIC_IBM_KING;
|
|
sp->revision = c & 1;
|
|
break;
|
|
default:
|
|
continue;
|
|
}
|
|
/*
|
|
* Check for Cirrus logic chips.
|
|
*/
|
|
putb(sp, 0x1F, 0);
|
|
c = getb(sp, 0x1F);
|
|
if ((c & 0xC0) == 0xC0) {
|
|
c = getb(sp, 0x1F);
|
|
if ((c & 0xC0) == 0) {
|
|
if (c & 0x20)
|
|
sp->controller = PCIC_PD672X;
|
|
else
|
|
sp->controller = PCIC_PD6710;
|
|
sp->revision = 8 - ((c & 0x1F) >> 2);
|
|
}
|
|
}
|
|
switch(sp->controller) {
|
|
case PCIC_I82365:
|
|
cinfo.name = "Intel 82365";
|
|
break;
|
|
case PCIC_IBM:
|
|
cinfo.name = "IBM PCIC";
|
|
break;
|
|
case PCIC_IBM_KING:
|
|
cinfo.name = "IBM KING PCMCIA Controller";
|
|
break;
|
|
case PCIC_PD672X:
|
|
cinfo.name = "Cirrus Logic PD672X";
|
|
break;
|
|
case PCIC_PD6710:
|
|
cinfo.name = "Cirrus Logic PD6710";
|
|
break;
|
|
case PCIC_VG468:
|
|
cinfo.name = "Vadem 468";
|
|
break;
|
|
case PCIC_VG469:
|
|
cinfo.name = "Vadem 469";
|
|
break;
|
|
case PCIC_RF5C396:
|
|
cinfo.name = "Ricoh RF5C396";
|
|
break;
|
|
case PCIC_VLSI:
|
|
cinfo.name = "VLSI 82C146";
|
|
break;
|
|
default:
|
|
cinfo.name = "Unknown!";
|
|
break;
|
|
}
|
|
#ifndef PCIC_NOCLRREGS
|
|
/*
|
|
* clear out the registers.
|
|
*/
|
|
for (i = 2; i < 0x40; i++)
|
|
putb(sp, i, 0);
|
|
#endif /* PCIC_NOCLRREGS */
|
|
/*
|
|
* OK it seems we have a PCIC or lookalike.
|
|
* Allocate a slot and initialise the data structures.
|
|
*/
|
|
validslots++;
|
|
sp->slot = slot;
|
|
if (kdc_pcic[slot].kdc_state == DC_UNKNOWN) {
|
|
if (slot != 0)
|
|
kdc_pcic[slot] = kdc_pcic[0];
|
|
kdc_pcic[slot].kdc_unit = slot;
|
|
kdc_pcic[slot].kdc_state = DC_UNCONFIGURED;
|
|
kdc_pcic[slot].kdc_description = cinfo.name;
|
|
dev_attach(kdc_pcic+slot);
|
|
}
|
|
slotp = pccard_alloc_slot(&cinfo);
|
|
if (slotp == 0)
|
|
continue;
|
|
kdc_pcic[slot].kdc_state = DC_IDLE;
|
|
slotp->cdata = sp;
|
|
sp->slotp = slotp;
|
|
/*
|
|
* If we haven't allocated an interrupt for the controller,
|
|
* then attempt to get one.
|
|
*/
|
|
if (pcic_irq == 0) {
|
|
pcic_irq = pccard_alloc_intr(PCIC_INT_MASK_ALLOWED,
|
|
pcicintr, 0, &pcic_imask);
|
|
if (pcic_irq < 0)
|
|
printf("pcic: failed to allocate IRQ\n");
|
|
}
|
|
/*
|
|
* Check for a card in this slot.
|
|
*/
|
|
setb (sp, PCIC_POWER, PCIC_PCPWRE| PCIC_DISRST);
|
|
if ((getb (sp, PCIC_STATUS) & PCIC_CD) != PCIC_CD) {
|
|
slotp->laststate = slotp->state = empty;
|
|
} else {
|
|
slotp->laststate = slotp->state = filled;
|
|
pccard_event(sp->slotp, card_inserted);
|
|
}
|
|
/*
|
|
* Assign IRQ for slot changes
|
|
*/
|
|
if (pcic_irq > 0)
|
|
putb(sp, PCIC_STAT_INT, (pcic_irq << 4) | 0xF);
|
|
}
|
|
if (validslots)
|
|
timeout(pcictimeout,0,hz/2);
|
|
return(validslots);
|
|
}
|
|
|
|
/*
|
|
* ioctl calls - Controller specific ioctls
|
|
*/
|
|
static int
|
|
pcic_ioctl(struct slot *slotp, int cmd, caddr_t data)
|
|
{
|
|
|
|
switch(cmd) {
|
|
default:
|
|
return(EINVAL);
|
|
/*
|
|
* Get/set PCIC registers
|
|
*/
|
|
case PIOCGREG:
|
|
((struct pcic_reg *)data)->value =
|
|
getb(slotp->cdata, ((struct pcic_reg *)data)->reg);
|
|
break;
|
|
case PIOCSREG:
|
|
putb(slotp->cdata, ((struct pcic_reg *)data)->reg,
|
|
((struct pcic_reg *)data)->value);
|
|
break;
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* pcic_power - Enable the power of the slot according to
|
|
* the parameters in the power structure(s).
|
|
*/
|
|
static int
|
|
pcic_power(struct slot *slotp)
|
|
{
|
|
unsigned char reg = PCIC_DISRST|PCIC_PCPWRE;
|
|
struct pcic_slot *sp = slotp->cdata;
|
|
|
|
switch(sp->controller) {
|
|
case PCIC_PD672X:
|
|
case PCIC_PD6710:
|
|
case PCIC_VG468:
|
|
case PCIC_VG469:
|
|
case PCIC_RF5C396:
|
|
case PCIC_VLSI:
|
|
case PCIC_IBM_KING:
|
|
switch(slotp->pwr.vpp) {
|
|
default:
|
|
return(EINVAL);
|
|
case 0:
|
|
break;
|
|
case 50:
|
|
case 33:
|
|
reg |= PCIC_VPP_5V;
|
|
break;
|
|
case 120:
|
|
reg |= PCIC_VPP_12V;
|
|
break;
|
|
}
|
|
switch(slotp->pwr.vcc) {
|
|
default:
|
|
return(EINVAL);
|
|
case 0:
|
|
break;
|
|
case 33:
|
|
if (sp->controller == PCIC_IBM_KING) {
|
|
reg |= PCIC_VCC_5V_KING;
|
|
break;
|
|
}
|
|
reg |= PCIC_VCC_5V;
|
|
if ((sp->controller == PCIC_VG468)||
|
|
(sp->controller == PCIC_VG469))
|
|
setb(sp, 0x2f, 0x03) ;
|
|
else
|
|
setb(sp, 0x16, 0x02);
|
|
break;
|
|
case 50:
|
|
if (sp->controller == PCIC_IBM_KING) {
|
|
reg |= PCIC_VCC_5V_KING;
|
|
break;
|
|
}
|
|
reg |= PCIC_VCC_5V;
|
|
if ((sp->controller == PCIC_VG468)||
|
|
(sp->controller == PCIC_VG469))
|
|
clrb(sp, 0x2f, 0x03) ;
|
|
else
|
|
clrb(sp, 0x16, 0x02);
|
|
break;
|
|
}
|
|
break;
|
|
}
|
|
putb (sp, PCIC_POWER, reg);
|
|
DELAY(300*1000);
|
|
if (slotp->pwr.vcc) {
|
|
reg |= PCIC_OUTENA;
|
|
putb (sp, PCIC_POWER, reg);
|
|
DELAY (100*1000);
|
|
}
|
|
return(0);
|
|
}
|
|
|
|
/*
|
|
* tell the PCIC which irq we want to use. only the following are legal:
|
|
* 3, 4, 5, 7, 9, 10, 11, 12, 14, 15
|
|
*/
|
|
static void
|
|
pcic_mapirq (struct slot *slotp, int irq)
|
|
{
|
|
struct pcic_slot *sp = slotp->cdata;
|
|
|
|
if (irq == 0)
|
|
clrb(sp, PCIC_INT_GEN, 0xF);
|
|
else
|
|
putb (sp, PCIC_INT_GEN, (getb (sp, PCIC_INT_GEN) & 0xF0) | irq);
|
|
}
|
|
|
|
/*
|
|
* pcic_reset - Reset the card and enable initial power.
|
|
*/
|
|
|
|
static void
|
|
pcic_reset(void *chan)
|
|
{
|
|
struct slot *slotp = chan;
|
|
struct pcic_slot *sp = slotp->cdata;
|
|
|
|
switch (slotp->insert_seq) {
|
|
case 0: /* Something funny happended on the way to the pub... */
|
|
return;
|
|
case 1: /* Assert reset */
|
|
clrb (sp, PCIC_INT_GEN, PCIC_CARDRESET);
|
|
slotp->insert_seq = 2;
|
|
timeout(pcic_reset, (void*) slotp, hz/4);
|
|
return;
|
|
case 2: /* Deassert it again */
|
|
setb (sp, PCIC_INT_GEN, PCIC_CARDRESET|PCIC_IOCARD);
|
|
slotp->insert_seq = 3;
|
|
timeout(pcic_reset, (void*) slotp, hz/4);
|
|
return;
|
|
case 3: /* Wait if card needs more time */
|
|
if (!getb(sp, PCIC_STATUS) & PCIC_READY) {
|
|
timeout(pcic_reset, (void*) slotp, hz/10);
|
|
return;
|
|
}
|
|
}
|
|
slotp->insert_seq = 0;
|
|
if (sp->controller == PCIC_PD672X || sp->controller == PCIC_PD6710) {
|
|
putb(sp, PCIC_TIME_SETUP0, 0x1);
|
|
putb(sp, PCIC_TIME_CMD0, 0x6);
|
|
putb(sp, PCIC_TIME_RECOV0, 0x0);
|
|
putb(sp, PCIC_TIME_SETUP1, 1);
|
|
putb(sp, PCIC_TIME_CMD1, 0x5F);
|
|
putb(sp, PCIC_TIME_RECOV1, 0);
|
|
}
|
|
selwakeup(&slotp->selp);
|
|
}
|
|
|
|
/*
|
|
* pcic_disable - Disable the slot.
|
|
*/
|
|
static void
|
|
pcic_disable(struct slot *slotp)
|
|
{
|
|
struct pcic_slot *sp = slotp->cdata;
|
|
|
|
putb(sp, PCIC_INT_GEN, 0);
|
|
putb(sp, PCIC_POWER, 0);
|
|
}
|
|
|
|
/*
|
|
* PCIC timer, it seems that we loose interrupts sometimes
|
|
* so poll just in case...
|
|
*/
|
|
|
|
static void
|
|
pcictimeout(void *chan)
|
|
{
|
|
timeout(pcictimeout,0,hz/2);
|
|
pcicintr(0);
|
|
}
|
|
|
|
/*
|
|
* PCIC Interrupt handler.
|
|
* Check each slot in turn, and read the card status change
|
|
* register. If this is non-zero, then a change has occurred
|
|
* on this card, so send an event to the main code.
|
|
*/
|
|
static void
|
|
pcicintr(int unit)
|
|
{
|
|
int slot, s;
|
|
unsigned char chg;
|
|
struct pcic_slot *sp = pcic_slots;
|
|
|
|
s = splhigh();
|
|
for (slot = 0; slot < PCIC_MAX_SLOTS; slot++, sp++)
|
|
if (sp->slotp && (chg = getb(sp, PCIC_STAT_CHG)) != 0)
|
|
if (chg & PCIC_CDTCH) {
|
|
if ((getb(sp, PCIC_STATUS) & PCIC_CD) ==
|
|
PCIC_CD) {
|
|
kdc_pcic[slot].kdc_state = DC_BUSY;;
|
|
pccard_event(sp->slotp,
|
|
card_inserted);
|
|
} else {
|
|
pccard_event(sp->slotp,
|
|
card_removed);
|
|
kdc_pcic[slot].kdc_state = DC_IDLE;;
|
|
}
|
|
}
|
|
splx(s);
|
|
}
|