Adrian Chadd c3f2102bef The AR5212 setup path (also used by the AR5416 code) configures a ... local variable with a beacon interval of 100 TU. This never gets modified if the beacon interval configuration changes. This may have been correct in earlier times, but with the advent of staggered beacons (which default to 1 / ATH_BCBUF beacon interval, so 25 TU here) this value is incorrect. It is used to configure the default CABQ readytime. So here, the cabq was being configured to be much greater than the target beacon timer (TBTT.) The driver should be configuring a cabq readytime value rather then leaving it to the HAL to choose sensible defaults. This should be done in the future - I'm simply trying to ensure sensible defaults are chosen.		2011-09-28 03:03:23 +00:00
..
ath_dfs/null	Remove the now unneeded references to these DFS methods.	2011-08-09 15:46:52 +00:00
ath_hal	The AR5212 setup path (also used by the AR5416 code) configures a	2011-09-28 03:03:23 +00:00
ath_rate	Fix the order of parameters passed to the HT frame duration calculation.	2011-09-11 09:43:13 +00:00
ah_osdep.c	Add a missing check for the global ath_hal_debug.	2011-07-14 23:30:30 +00:00
ah_osdep.h	Fix AR5416 and later parts when building with AH_DEBUG or similar defined:	2009-07-06 20:51:54 +00:00
if_ath_ahb.c	Fix ath_ahb(4) bus attach and eeprom error handling.	2011-06-13 04:31:57 +00:00
if_ath_debug.c	Break out the debug macros from if_ath.c into if_ath_debug.[ch] .	2011-01-29 05:08:21 +00:00
if_ath_debug.h	Break out the debug macros from if_ath.c into if_ath_debug.[ch] .	2011-01-29 05:08:21 +00:00
if_ath_keycache.c	Break the keycache management functions out into if_ath_keycache.c .	2011-03-02 17:19:54 +00:00
if_ath_keycache.h	Break the keycache management functions out into if_ath_keycache.c .	2011-03-02 17:19:54 +00:00
if_ath_misc.h	Migrate the sysctl related routines (statistics, debugging, etc) out of	2011-03-02 16:03:19 +00:00
if_ath_pci.c	Break out the ath PCI logic into a separate device/module.	2011-03-31 08:07:13 +00:00
if_ath_sysctl.c	Reset the NIC if ANI is enabled or disabled.	2011-07-29 23:55:17 +00:00
if_ath_sysctl.h	Break out most of the HAL related tweaks into a per-HAL instance,	2011-06-23 02:38:36 +00:00
if_ath_tx_ht.c	Enable setting the short-GI bit when TX'ing HT rates but only if the	2011-05-30 15:06:57 +00:00
if_ath_tx_ht.h	The current code used the fields in ath_set11nratescenario() . Use them	2011-02-12 02:14:19 +00:00
if_ath_tx.c	Add in HT protection but disable it by default.	2011-03-28 11:48:49 +00:00
if_ath_tx.h	Migrate the TX path code out of if_ath and into a separate source file.	2011-01-29 11:35:23 +00:00
if_ath.c	Update the TSF and next-TBTT methods to work for the AR5416 and later NICs.	2011-09-08 01:23:05 +00:00
if_athdfs.h	Remove the now unneeded references to these DFS methods.	2011-08-09 15:46:52 +00:00
if_athioctl.h	This links in the ath dfs ioctl into the driver and defines the	2011-07-21 14:25:12 +00:00
if_athrate.h	Add a new method to the rate control modules which extract out the	2011-02-01 08:10:18 +00:00
if_athvar.h	Update the default AIFS value for hostap mode.	2011-09-28 02:54:42 +00:00