539 lines
25 KiB
C
539 lines
25 KiB
C
/*-
|
|
* Copyright (c) 2003 Stuart Walsh
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS 'AS IS' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
/* $FreeBSD$ */
|
|
|
|
#ifndef _BFE_H
|
|
#define _BFE_H
|
|
|
|
/* PCI registers */
|
|
#define BFE_PCI_MEMLO 0x10
|
|
#define BFE_PCI_MEMHIGH 0x14
|
|
#define BFE_PCI_INTLINE 0x3C
|
|
|
|
/* Register layout. */
|
|
#define BFE_DEVCTRL 0x00000000 /* Device Control */
|
|
#define BFE_PFE 0x00000080 /* Pattern Filtering Enable */
|
|
#define BFE_IPP 0x00000400 /* Internal EPHY Present */
|
|
#define BFE_EPR 0x00008000 /* EPHY Reset */
|
|
#define BFE_PME 0x00001000 /* PHY Mode Enable */
|
|
#define BFE_PMCE 0x00002000 /* PHY Mode Clocks Enable */
|
|
#define BFE_PADDR 0x0007c000 /* PHY Address */
|
|
#define BFE_PADDR_SHIFT 18
|
|
|
|
#define BFE_BIST_STAT 0x0000000C /* Built-In Self-Test Status */
|
|
#define BFE_WKUP_LEN 0x00000010 /* Wakeup Length */
|
|
|
|
#define BFE_ISTAT 0x00000020 /* Interrupt Status */
|
|
#define BFE_ISTAT_PME 0x00000040 /* Power Management Event */
|
|
#define BFE_ISTAT_TO 0x00000080 /* General Purpose Timeout */
|
|
#define BFE_ISTAT_DSCE 0x00000400 /* Descriptor Error */
|
|
#define BFE_ISTAT_DATAE 0x00000800 /* Data Error */
|
|
#define BFE_ISTAT_DPE 0x00001000 /* Descr. Protocol Error */
|
|
#define BFE_ISTAT_RDU 0x00002000 /* Receive Descr. Underflow */
|
|
#define BFE_ISTAT_RFO 0x00004000 /* Receive FIFO Overflow */
|
|
#define BFE_ISTAT_TFU 0x00008000 /* Transmit FIFO Underflow */
|
|
#define BFE_ISTAT_RX 0x00010000 /* RX Interrupt */
|
|
#define BFE_ISTAT_TX 0x01000000 /* TX Interrupt */
|
|
#define BFE_ISTAT_EMAC 0x04000000 /* EMAC Interrupt */
|
|
#define BFE_ISTAT_MII_WRITE 0x08000000 /* MII Write Interrupt */
|
|
#define BFE_ISTAT_MII_READ 0x10000000 /* MII Read Interrupt */
|
|
#define BFE_ISTAT_ERRORS (BFE_ISTAT_DSCE | BFE_ISTAT_DATAE | BFE_ISTAT_DPE |\
|
|
BFE_ISTAT_RDU | BFE_ISTAT_RFO | BFE_ISTAT_TFU)
|
|
|
|
#define BFE_IMASK 0x00000024 /* Interrupt Mask */
|
|
#define BFE_IMASK_DEF (BFE_ISTAT_ERRORS | BFE_ISTAT_TO | BFE_ISTAT_RX | \
|
|
BFE_ISTAT_TX)
|
|
|
|
#define BFE_MAC_CTRL 0x000000A8 /* MAC Control */
|
|
#define BFE_CTRL_CRC32_ENAB 0x00000001 /* CRC32 Generation Enable */
|
|
#define BFE_CTRL_PDOWN 0x00000004 /* Onchip EPHY Powerdown */
|
|
#define BFE_CTRL_EDET 0x00000008 /* Onchip EPHY Energy Detected */
|
|
#define BFE_CTRL_LED 0x000000e0 /* Onchip EPHY LED Control */
|
|
#define BFE_CTRL_LED_SHIFT 5
|
|
|
|
#define BFE_RCV_LAZY 0x00000100 /* Lazy Interrupt Control */
|
|
#define BFE_LAZY_TO_MASK 0x00ffffff /* Timeout */
|
|
#define BFE_LAZY_FC_MASK 0xff000000 /* Frame Count */
|
|
#define BFE_LAZY_FC_SHIFT 24
|
|
|
|
#define BFE_DMATX_CTRL 0x00000200 /* DMA TX Control */
|
|
#define BFE_TX_CTRL_ENABLE 0x00000001 /* Enable */
|
|
#define BFE_TX_CTRL_SUSPEND 0x00000002 /* Suepend Request */
|
|
#define BFE_TX_CTRL_LPBACK 0x00000004 /* Loopback Enable */
|
|
#define BFE_TX_CTRL_FAIRPRI 0x00000008 /* Fair Priority */
|
|
#define BFE_TX_CTRL_FLUSH 0x00000010 /* Flush Request */
|
|
|
|
#define BFE_DMATX_ADDR 0x00000204 /* DMA TX Descriptor Ring Address */
|
|
#define BFE_DMATX_PTR 0x00000208 /* DMA TX Last Posted Descriptor */
|
|
#define BFE_DMATX_STAT 0x0000020C /* DMA TX Current Active Desc. + Status */
|
|
#define BFE_STAT_CDMASK 0x00000fff /* Current Descriptor Mask */
|
|
#define BFE_STAT_SMASK 0x0000f000 /* State Mask */
|
|
#define BFE_STAT_DISABLE 0x00000000 /* State Disabled */
|
|
#define BFE_STAT_SACTIVE 0x00001000 /* State Active */
|
|
#define BFE_STAT_SIDLE 0x00002000 /* State Idle Wait */
|
|
#define BFE_STAT_STOPPED 0x00003000 /* State Stopped */
|
|
#define BFE_STAT_SSUSP 0x00004000 /* State Suspend Pending */
|
|
#define BFE_STAT_EMASK 0x000f0000 /* Error Mask */
|
|
#define BFE_STAT_ENONE 0x00000000 /* Error None */
|
|
#define BFE_STAT_EDPE 0x00010000 /* Error Desc. Protocol Error */
|
|
#define BFE_STAT_EDFU 0x00020000 /* Error Data FIFO Underrun */
|
|
#define BFE_STAT_EBEBR 0x00030000 /* Error Bus Error on Buffer Read */
|
|
#define BFE_STAT_EBEDA 0x00040000 /* Error Bus Error on Desc. Access */
|
|
#define BFE_STAT_FLUSHED 0x00100000 /* Flushed */
|
|
|
|
#define BFE_DMARX_CTRL 0x00000210 /* DMA RX Control */
|
|
#define BFE_RX_CTRL_ENABLE 0x00000001 /* Enable */
|
|
#define BFE_RX_CTRL_ROMASK 0x000000fe /* Receive Offset Mask */
|
|
#define BFE_RX_CTRL_ROSHIFT 1 /* Receive Offset Shift */
|
|
|
|
#define BFE_DMARX_ADDR 0x00000214 /* DMA RX Descriptor Ring Address */
|
|
#define BFE_DMARX_PTR 0x00000218 /* DMA RX Last Posted Descriptor */
|
|
#define BFE_DMARX_STAT 0x0000021C /* DMA RX Current Active Desc. + Status */
|
|
|
|
#define BFE_RXCONF 0x00000400 /* EMAC RX Config */
|
|
#define BFE_RXCONF_DBCAST 0x00000001 /* Disable Broadcast */
|
|
#define BFE_RXCONF_ALLMULTI 0x00000002 /* Accept All Multicast */
|
|
#define BFE_RXCONF_NORXTX 0x00000004 /* Receive Disable While Transmitting */
|
|
#define BFE_RXCONF_PROMISC 0x00000008 /* Promiscuous Enable */
|
|
#define BFE_RXCONF_LPBACK 0x00000010 /* Loopback Enable */
|
|
#define BFE_RXCONF_FLOW 0x00000020 /* Flow Control Enable */
|
|
#define BFE_RXCONF_ACCEPT 0x00000040 /* Accept Unicast Flow Control Frame */
|
|
#define BFE_RXCONF_RFILT 0x00000080 /* Reject Filter */
|
|
|
|
#define BFE_RXMAXLEN 0x00000404 /* EMAC RX Max Packet Length */
|
|
#define BFE_TXMAXLEN 0x00000408 /* EMAC TX Max Packet Length */
|
|
|
|
#define BFE_MDIO_CTRL 0x00000410 /* EMAC MDIO Control */
|
|
#define BFE_MDIO_MAXF_MASK 0x0000007f /* MDC Frequency */
|
|
#define BFE_MDIO_PREAMBLE 0x00000080 /* MII Preamble Enable */
|
|
|
|
#define BFE_MDIO_DATA 0x00000414 /* EMAC MDIO Data */
|
|
#define BFE_MDIO_DATA_DATA 0x0000ffff /* R/W Data */
|
|
#define BFE_MDIO_TA_MASK 0x00030000 /* Turnaround Value */
|
|
#define BFE_MDIO_TA_SHIFT 16
|
|
#define BFE_MDIO_TA_VALID 2
|
|
|
|
#define BFE_MDIO_RA_MASK 0x007c0000 /* Register Address */
|
|
#define BFE_MDIO_PMD_MASK 0x0f800000 /* Physical Media Device */
|
|
#define BFE_MDIO_OP_MASK 0x30000000 /* Opcode */
|
|
#define BFE_MDIO_SB_MASK 0xc0000000 /* Start Bits */
|
|
#define BFE_MDIO_SB_START 0x40000000 /* Start Of Frame */
|
|
#define BFE_MDIO_RA_SHIFT 18
|
|
#define BFE_MDIO_PMD_SHIFT 23
|
|
#define BFE_MDIO_OP_SHIFT 28
|
|
#define BFE_MDIO_OP_WRITE 1
|
|
#define BFE_MDIO_OP_READ 2
|
|
#define BFE_MDIO_SB_SHIFT 30
|
|
|
|
#define BFE_EMAC_IMASK 0x00000418 /* EMAC Interrupt Mask */
|
|
#define BFE_EMAC_ISTAT 0x0000041C /* EMAC Interrupt Status */
|
|
#define BFE_EMAC_INT_MII 0x00000001 /* MII MDIO Interrupt */
|
|
#define BFE_EMAC_INT_MIB 0x00000002 /* MIB Interrupt */
|
|
#define BFE_EMAC_INT_FLOW 0x00000003 /* Flow Control Interrupt */
|
|
|
|
#define BFE_CAM_DATA_LO 0x00000420 /* EMAC CAM Data Low */
|
|
#define BFE_CAM_DATA_HI 0x00000424 /* EMAC CAM Data High */
|
|
#define BFE_CAM_HI_VALID 0x00010000 /* Valid Bit */
|
|
|
|
#define BFE_CAM_CTRL 0x00000428 /* EMAC CAM Control */
|
|
#define BFE_CAM_ENABLE 0x00000001 /* CAM Enable */
|
|
#define BFE_CAM_MSEL 0x00000002 /* Mask Select */
|
|
#define BFE_CAM_READ 0x00000004 /* Read */
|
|
#define BFE_CAM_WRITE 0x00000008 /* Read */
|
|
#define BFE_CAM_INDEX_MASK 0x003f0000 /* Index Mask */
|
|
#define BFE_CAM_BUSY 0x80000000 /* CAM Busy */
|
|
#define BFE_CAM_INDEX_SHIFT 16
|
|
|
|
#define BFE_ENET_CTRL 0x0000042C /* EMAC ENET Control */
|
|
#define BFE_ENET_ENABLE 0x00000001 /* EMAC Enable */
|
|
#define BFE_ENET_DISABLE 0x00000002 /* EMAC Disable */
|
|
#define BFE_ENET_SRST 0x00000004 /* EMAC Soft Reset */
|
|
#define BFE_ENET_EPSEL 0x00000008 /* External PHY Select */
|
|
|
|
#define BFE_TX_CTRL 0x00000430 /* EMAC TX Control */
|
|
#define BFE_TX_DUPLEX 0x00000001 /* Full Duplex */
|
|
#define BFE_TX_FMODE 0x00000002 /* Flow Mode */
|
|
#define BFE_TX_SBENAB 0x00000004 /* Single Backoff Enable */
|
|
#define BFE_TX_SMALL_SLOT 0x00000008 /* Small Slottime */
|
|
|
|
#define BFE_TX_WMARK 0x00000434 /* EMAC TX Watermark */
|
|
|
|
#define BFE_MIB_CTRL 0x00000438 /* EMAC MIB Control */
|
|
#define BFE_MIB_CLR_ON_READ 0x00000001 /* Autoclear on Read */
|
|
|
|
/* Status registers */
|
|
#define BFE_TX_GOOD_O 0x00000500 /* MIB TX Good Octets */
|
|
#define BFE_TX_GOOD_P 0x00000504 /* MIB TX Good Packets */
|
|
#define BFE_TX_O 0x00000508 /* MIB TX Octets */
|
|
#define BFE_TX_P 0x0000050C /* MIB TX Packets */
|
|
#define BFE_TX_BCAST 0x00000510 /* MIB TX Broadcast Packets */
|
|
#define BFE_TX_MCAST 0x00000514 /* MIB TX Multicast Packets */
|
|
#define BFE_TX_64 0x00000518 /* MIB TX <= 64 byte Packets */
|
|
#define BFE_TX_65_127 0x0000051C /* MIB TX 65 to 127 byte Packets */
|
|
#define BFE_TX_128_255 0x00000520 /* MIB TX 128 to 255 byte Packets */
|
|
#define BFE_TX_256_511 0x00000524 /* MIB TX 256 to 511 byte Packets */
|
|
#define BFE_TX_512_1023 0x00000528 /* MIB TX 512 to 1023 byte Packets */
|
|
#define BFE_TX_1024_MAX 0x0000052C /* MIB TX 1024 to max byte Packets */
|
|
#define BFE_TX_JABBER 0x00000530 /* MIB TX Jabber Packets */
|
|
#define BFE_TX_OSIZE 0x00000534 /* MIB TX Oversize Packets */
|
|
#define BFE_TX_FRAG 0x00000538 /* MIB TX Fragment Packets */
|
|
#define BFE_TX_URUNS 0x0000053C /* MIB TX Underruns */
|
|
#define BFE_TX_TCOLS 0x00000540 /* MIB TX Total Collisions */
|
|
#define BFE_TX_SCOLS 0x00000544 /* MIB TX Single Collisions */
|
|
#define BFE_TX_MCOLS 0x00000548 /* MIB TX Multiple Collisions */
|
|
#define BFE_TX_ECOLS 0x0000054C /* MIB TX Excessive Collisions */
|
|
#define BFE_TX_LCOLS 0x00000550 /* MIB TX Late Collisions */
|
|
#define BFE_TX_DEFERED 0x00000554 /* MIB TX Defered Packets */
|
|
#define BFE_TX_CLOST 0x00000558 /* MIB TX Carrier Lost */
|
|
#define BFE_TX_PAUSE 0x0000055C /* MIB TX Pause Packets */
|
|
#define BFE_RX_GOOD_O 0x00000580 /* MIB RX Good Octets */
|
|
#define BFE_RX_GOOD_P 0x00000584 /* MIB RX Good Packets */
|
|
#define BFE_RX_O 0x00000588 /* MIB RX Octets */
|
|
#define BFE_RX_P 0x0000058C /* MIB RX Packets */
|
|
#define BFE_RX_BCAST 0x00000590 /* MIB RX Broadcast Packets */
|
|
#define BFE_RX_MCAST 0x00000594 /* MIB RX Multicast Packets */
|
|
#define BFE_RX_64 0x00000598 /* MIB RX <= 64 byte Packets */
|
|
#define BFE_RX_65_127 0x0000059C /* MIB RX 65 to 127 byte Packets */
|
|
#define BFE_RX_128_255 0x000005A0 /* MIB RX 128 to 255 byte Packets */
|
|
#define BFE_RX_256_511 0x000005A4 /* MIB RX 256 to 511 byte Packets */
|
|
#define BFE_RX_512_1023 0x000005A8 /* MIB RX 512 to 1023 byte Packets */
|
|
#define BFE_RX_1024_MAX 0x000005AC /* MIB RX 1024 to max byte Packets */
|
|
#define BFE_RX_JABBER 0x000005B0 /* MIB RX Jabber Packets */
|
|
#define BFE_RX_OSIZE 0x000005B4 /* MIB RX Oversize Packets */
|
|
#define BFE_RX_FRAG 0x000005B8 /* MIB RX Fragment Packets */
|
|
#define BFE_RX_MISS 0x000005BC /* MIB RX Missed Packets */
|
|
#define BFE_RX_CRCA 0x000005C0 /* MIB RX CRC Align Errors */
|
|
#define BFE_RX_USIZE 0x000005C4 /* MIB RX Undersize Packets */
|
|
#define BFE_RX_CRC 0x000005C8 /* MIB RX CRC Errors */
|
|
#define BFE_RX_ALIGN 0x000005CC /* MIB RX Align Errors */
|
|
#define BFE_RX_SYM 0x000005D0 /* MIB RX Symbol Errors */
|
|
#define BFE_RX_PAUSE 0x000005D4 /* MIB RX Pause Packets */
|
|
#define BFE_RX_NPAUSE 0x000005D8 /* MIB RX Non-Pause Packets */
|
|
|
|
#define BFE_SBIMSTATE 0x00000F90 /* BFE_SB Initiator Agent State */
|
|
#define BFE_PC 0x0000000f /* Pipe Count */
|
|
#define BFE_AP_MASK 0x00000030 /* Arbitration Priority */
|
|
#define BFE_AP_BOTH 0x00000000 /* Use both timeslices and token */
|
|
#define BFE_AP_TS 0x00000010 /* Use timeslices only */
|
|
#define BFE_AP_TK 0x00000020 /* Use token only */
|
|
#define BFE_AP_RSV 0x00000030 /* Reserved */
|
|
#define BFE_IBE 0x00020000 /* In Band Error */
|
|
#define BFE_TO 0x00040000 /* Timeout */
|
|
|
|
|
|
/* Seems the bcm440x has a fairly generic core, we only need be concerned with
|
|
* a couple of these
|
|
*/
|
|
#define BFE_SBINTVEC 0x00000F94 /* BFE_SB Interrupt Mask */
|
|
#define BFE_INTVEC_PCI 0x00000001 /* Enable interrupts for PCI */
|
|
#define BFE_INTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */
|
|
#define BFE_INTVEC_ILINE20 0x00000004 /* Enable interrupts for iline20 */
|
|
#define BFE_INTVEC_CODEC 0x00000008 /* Enable interrupts for v90 codec */
|
|
#define BFE_INTVEC_USB 0x00000010 /* Enable interrupts for usb */
|
|
#define BFE_INTVEC_EXTIF 0x00000020 /* Enable interrupts for external i/f */
|
|
#define BFE_INTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */
|
|
|
|
#define BFE_SBTMSLOW 0x00000F98 /* BFE_SB Target State Low */
|
|
#define BFE_RESET 0x00000001 /* Reset */
|
|
#define BFE_REJECT 0x00000002 /* Reject */
|
|
#define BFE_CLOCK 0x00010000 /* Clock Enable */
|
|
#define BFE_FGC 0x00020000 /* Force Gated Clocks On */
|
|
#define BFE_PE 0x40000000 /* Power Management Enable */
|
|
#define BFE_BE 0x80000000 /* BIST Enable */
|
|
|
|
#define BFE_SBTMSHIGH 0x00000F9C /* BFE_SB Target State High */
|
|
#define BFE_SERR 0x00000001 /* S-error */
|
|
#define BFE_INT 0x00000002 /* Interrupt */
|
|
#define BFE_BUSY 0x00000004 /* Busy */
|
|
#define BFE_GCR 0x20000000 /* Gated Clock Request */
|
|
#define BFE_BISTF 0x40000000 /* BIST Failed */
|
|
#define BFE_BISTD 0x80000000 /* BIST Done */
|
|
|
|
#define BFE_SBBWA0 0x00000FA0 /* BFE_SB Bandwidth Allocation Table 0 */
|
|
#define BFE_TAB0_MASK 0x0000ffff /* Lookup Table 0 */
|
|
#define BFE_TAB1_MASK 0xffff0000 /* Lookup Table 0 */
|
|
#define BFE_TAB0_SHIFT 0
|
|
#define BFE_TAB1_SHIFT 16
|
|
|
|
#define BFE_SBIMCFGLOW 0x00000FA8 /* BFE_SB Initiator Configuration Low */
|
|
#define BFE_STO_MASK 0x00000003 /* Service Timeout */
|
|
#define BFE_RTO_MASK 0x00000030 /* Request Timeout */
|
|
#define BFE_CID_MASK 0x00ff0000 /* Connection ID */
|
|
#define BFE_RTO_SHIFT 4
|
|
#define BFE_CID_SHIFT 16
|
|
|
|
#define BFE_SBIMCFGHIGH 0x00000FAC /* BFE_SB Initiator Configuration High */
|
|
#define BFE_IEM_MASK 0x0000000c /* Inband Error Mode */
|
|
#define BFE_TEM_MASK 0x00000030 /* Timeout Error Mode */
|
|
#define BFE_BEM_MASK 0x000000c0 /* Bus Error Mode */
|
|
#define BFE_TEM_SHIFT 4
|
|
#define BFE_BEM_SHIFT 6
|
|
|
|
#define BFE_SBTMCFGLOW 0x00000FB8 /* BFE_SB Target Configuration Low */
|
|
#define BFE_LOW_CD_MASK 0x000000ff /* Clock Divide Mask */
|
|
#define BFE_LOW_CO_MASK 0x0000f800 /* Clock Offset Mask */
|
|
#define BFE_LOW_IF_MASK 0x00fc0000 /* Interrupt Flags Mask */
|
|
#define BFE_LOW_IM_MASK 0x03000000 /* Interrupt Mode Mask */
|
|
#define BFE_LOW_CO_SHIFT 11
|
|
#define BFE_LOW_IF_SHIFT 18
|
|
#define BFE_LOW_IM_SHIFT 24
|
|
|
|
#define BFE_SBTMCFGHIGH 0x00000FBC /* BFE_SB Target Configuration High */
|
|
#define BFE_HIGH_BM_MASK 0x00000003 /* Busy Mode */
|
|
#define BFE_HIGH_RM_MASK 0x0000000C /* Retry Mode */
|
|
#define BFE_HIGH_SM_MASK 0x00000030 /* Stop Mode */
|
|
#define BFE_HIGH_EM_MASK 0x00000300 /* Error Mode */
|
|
#define BFE_HIGH_IM_MASK 0x00000c00 /* Interrupt Mode */
|
|
#define BFE_HIGH_RM_SHIFT 2
|
|
#define BFE_HIGH_SM_SHIFT 4
|
|
#define BFE_HIGH_EM_SHIFT 8
|
|
#define BFE_HIGH_IM_SHIFT 10
|
|
|
|
#define BFE_SBBCFG 0x00000FC0 /* BFE_SB Broadcast Configuration */
|
|
#define BFE_LAT_MASK 0x00000003 /* BFE_SB Latency */
|
|
#define BFE_MAX0_MASK 0x000f0000 /* MAX Counter 0 */
|
|
#define BFE_MAX1_MASK 0x00f00000 /* MAX Counter 1 */
|
|
#define BFE_MAX0_SHIFT 16
|
|
#define BFE_MAX1_SHIFT 20
|
|
|
|
#define BFE_SBBSTATE 0x00000FC8 /* BFE_SB Broadcast State */
|
|
#define BFE_SBBSTATE_SRD 0x00000001 /* ST Reg Disable */
|
|
#define BFE_SBBSTATE_HRD 0x00000002 /* Hold Reg Disable */
|
|
|
|
#define BFE_SBACTCNFG 0x00000FD8 /* BFE_SB Activate Configuration */
|
|
#define BFE_SBFLAGST 0x00000FE8 /* BFE_SB Current BFE_SBFLAGS */
|
|
|
|
#define BFE_SBIDLOW 0x00000FF8 /* BFE_SB Identification Low */
|
|
#define BFE_CS_MASK 0x00000003 /* Config Space Mask */
|
|
#define BFE_AR_MASK 0x00000038 /* Num Address Ranges Supported */
|
|
#define BFE_SYNCH 0x00000040 /* Sync */
|
|
#define BFE_INIT 0x00000080 /* Initiator */
|
|
#define BFE_MINLAT_MASK 0x00000f00 /* Minimum Backplane Latency */
|
|
#define BFE_MAXLAT_MASK 0x0000f000 /* Maximum Backplane Latency */
|
|
#define BFE_FIRST 0x00010000 /* This Initiator is First */
|
|
#define BFE_CW_MASK 0x000c0000 /* Cycle Counter Width */
|
|
#define BFE_TP_MASK 0x00f00000 /* Target Ports */
|
|
#define BFE_IP_MASK 0x0f000000 /* Initiator Ports */
|
|
#define BFE_AR_SHIFT 3
|
|
#define BFE_MINLAT_SHIFT 8
|
|
#define BFE_MAXLAT_SHIFT 12
|
|
#define BFE_CW_SHIFT 18
|
|
#define BFE_TP_SHIFT 20
|
|
#define BFE_IP_SHIFT 24
|
|
|
|
#define BFE_SBIDHIGH 0x00000FFC /* BFE_SB Identification High */
|
|
#define BFE_RC_MASK 0x0000000f /* Revision Code */
|
|
#define BFE_CC_MASK 0x0000fff0 /* Core Code */
|
|
#define BFE_VC_MASK 0xffff0000 /* Vendor Code */
|
|
#define BFE_CC_SHIFT 4
|
|
#define BFE_VC_SHIFT 16
|
|
|
|
#define BFE_CORE_ILINE20 0x801
|
|
#define BFE_CORE_SDRAM 0x803
|
|
#define BFE_CORE_PCI 0x804
|
|
#define BFE_CORE_MIPS 0x805
|
|
#define BFE_CORE_ENET 0x806
|
|
#define BFE_CORE_CODEC 0x807
|
|
#define BFE_CORE_USB 0x808
|
|
#define BFE_CORE_ILINE100 0x80a
|
|
#define BFE_CORE_EXTIF 0x811
|
|
|
|
/* SSB PCI config space registers. */
|
|
#define BFE_BAR0_WIN 0x80
|
|
#define BFE_BAR1_WIN 0x84
|
|
#define BFE_SPROM_CONTROL 0x88
|
|
#define BFE_BAR1_CONTROL 0x8c
|
|
|
|
/* SSB core and hsot control registers. */
|
|
#define BFE_SSB_CONTROL 0x00000000
|
|
#define BFE_SSB_ARBCONTROL 0x00000010
|
|
#define BFE_SSB_ISTAT 0x00000020
|
|
#define BFE_SSB_IMASK 0x00000024
|
|
#define BFE_SSB_MBOX 0x00000028
|
|
#define BFE_SSB_BCAST_ADDR 0x00000050
|
|
#define BFE_SSB_BCAST_DATA 0x00000054
|
|
#define BFE_SSB_PCI_TRANS_0 0x00000100
|
|
#define BFE_SSB_PCI_TRANS_1 0x00000104
|
|
#define BFE_SSB_PCI_TRANS_2 0x00000108
|
|
#define BFE_SSB_SPROM 0x00000800
|
|
|
|
#define BFE_SSB_PCI_MEM 0x00000000
|
|
#define BFE_SSB_PCI_IO 0x00000001
|
|
#define BFE_SSB_PCI_CFG0 0x00000002
|
|
#define BFE_SSB_PCI_CFG1 0x00000003
|
|
#define BFE_SSB_PCI_PREF 0x00000004
|
|
#define BFE_SSB_PCI_BURST 0x00000008
|
|
#define BFE_SSB_PCI_MASK0 0xfc000000
|
|
#define BFE_SSB_PCI_MASK1 0xfc000000
|
|
#define BFE_SSB_PCI_MASK2 0xc0000000
|
|
|
|
#define BFE_DESC_LEN 0x00001fff
|
|
#define BFE_DESC_CMASK 0x0ff00000 /* Core specific bits */
|
|
#define BFE_DESC_EOT 0x10000000 /* End of Table */
|
|
#define BFE_DESC_IOC 0x20000000 /* Interrupt On Completion */
|
|
#define BFE_DESC_EOF 0x40000000 /* End of Frame */
|
|
#define BFE_DESC_SOF 0x80000000 /* Start of Frame */
|
|
|
|
#define BFE_RX_CP_THRESHOLD 256
|
|
#define BFE_RX_HEADER_LEN 28
|
|
|
|
#define BFE_RX_FLAG_OFIFO 0x00000001 /* FIFO Overflow */
|
|
#define BFE_RX_FLAG_CRCERR 0x00000002 /* CRC Error */
|
|
#define BFE_RX_FLAG_SERR 0x00000004 /* Receive Symbol Error */
|
|
#define BFE_RX_FLAG_ODD 0x00000008 /* Frame has odd number of nibbles */
|
|
#define BFE_RX_FLAG_LARGE 0x00000010 /* Frame is > RX MAX Length */
|
|
#define BFE_RX_FLAG_MCAST 0x00000020 /* Dest is Multicast Address */
|
|
#define BFE_RX_FLAG_BCAST 0x00000040 /* Dest is Broadcast Address */
|
|
#define BFE_RX_FLAG_MISS 0x00000080 /* Received due to promisc mode */
|
|
#define BFE_RX_FLAG_LAST 0x00000800 /* Last buffer in frame */
|
|
#define BFE_RX_FLAG_ERRORS (BFE_RX_FLAG_ODD | BFE_RX_FLAG_SERR | \
|
|
BFE_RX_FLAG_CRCERR | BFE_RX_FLAG_OFIFO)
|
|
|
|
#define BFE_MCAST_TBL_SIZE 32
|
|
#define BFE_PCI_DMA 0x40000000
|
|
#define BFE_REG_PCI 0x18002000
|
|
|
|
#define BCOM_VENDORID 0x14E4
|
|
#define BCOM_DEVICEID_BCM4401 0x4401
|
|
#define BCOM_DEVICEID_BCM4401B0 0x170c
|
|
|
|
#define PCI_SETBIT(dev, reg, x, s) \
|
|
pci_write_config(dev, reg, (pci_read_config(dev, reg, s) | (x)), s)
|
|
#define PCI_CLRBIT(dev, reg, x, s) \
|
|
pci_write_config(dev, reg, (pci_read_config(dev, reg, s) & ~(x)), s)
|
|
|
|
#define BFE_RX_RING_SIZE 512
|
|
#define BFE_TX_RING_SIZE 512
|
|
#define BFE_LINK_DOWN 5
|
|
#define BFE_TX_LIST_CNT 511
|
|
#define BFE_RX_LIST_CNT 511
|
|
#define BFE_TX_LIST_SIZE BFE_TX_LIST_CNT * sizeof(struct bfe_desc)
|
|
#define BFE_RX_LIST_SIZE BFE_RX_LIST_CNT * sizeof(struct bfe_desc)
|
|
#define BFE_RX_OFFSET 30
|
|
#define BFE_TX_QLEN 256
|
|
|
|
#define CSR_READ_4(sc, reg) \
|
|
bus_space_read_4(sc->bfe_btag, sc->bfe_bhandle, reg)
|
|
|
|
#define CSR_WRITE_4(sc, reg, val) \
|
|
bus_space_write_4(sc->bfe_btag, sc->bfe_bhandle, reg, val)
|
|
|
|
#define BFE_OR(sc, name, val) \
|
|
CSR_WRITE_4(sc, name, CSR_READ_4(sc, name) | val)
|
|
|
|
#define BFE_AND(sc, name, val) \
|
|
CSR_WRITE_4(sc, name, CSR_READ_4(sc, name) & val)
|
|
|
|
#define BFE_LOCK_ASSERT(_sc) mtx_assert(&(_sc)->bfe_mtx, MA_OWNED)
|
|
#define BFE_LOCK(_sc) mtx_lock(&(_sc)->bfe_mtx)
|
|
#define BFE_UNLOCK(_sc) mtx_unlock(&(_sc)->bfe_mtx)
|
|
|
|
#define BFE_INC(x, y) (x) = ((x) == ((y)-1)) ? 0 : (x)+1
|
|
|
|
struct bfe_data {
|
|
struct mbuf *bfe_mbuf;
|
|
bus_dmamap_t bfe_map;
|
|
};
|
|
|
|
struct bfe_desc {
|
|
u_int32_t bfe_ctrl;
|
|
u_int32_t bfe_addr;
|
|
};
|
|
|
|
struct bfe_rxheader {
|
|
u_int16_t len;
|
|
u_int16_t flags;
|
|
u_int16_t pad[12];
|
|
};
|
|
|
|
struct bfe_hw_stats {
|
|
u_int32_t tx_good_octets, tx_good_pkts, tx_octets;
|
|
u_int32_t tx_pkts, tx_broadcast_pkts, tx_multicast_pkts;
|
|
u_int32_t tx_len_64, tx_len_65_to_127, tx_len_128_to_255;
|
|
u_int32_t tx_len_256_to_511, tx_len_512_to_1023, tx_len_1024_to_max;
|
|
u_int32_t tx_jabber_pkts, tx_oversize_pkts, tx_fragment_pkts;
|
|
u_int32_t tx_underruns, tx_total_cols, tx_single_cols;
|
|
u_int32_t tx_multiple_cols, tx_excessive_cols, tx_late_cols;
|
|
u_int32_t tx_defered, tx_carrier_lost, tx_pause_pkts;
|
|
u_int32_t __pad1[8];
|
|
|
|
u_int32_t rx_good_octets, rx_good_pkts, rx_octets;
|
|
u_int32_t rx_pkts, rx_broadcast_pkts, rx_multicast_pkts;
|
|
u_int32_t rx_len_64, rx_len_65_to_127, rx_len_128_to_255;
|
|
u_int32_t rx_len_256_to_511, rx_len_512_to_1023, rx_len_1024_to_max;
|
|
u_int32_t rx_jabber_pkts, rx_oversize_pkts, rx_fragment_pkts;
|
|
u_int32_t rx_missed_pkts, rx_crc_align_errs, rx_undersize;
|
|
u_int32_t rx_crc_errs, rx_align_errs, rx_symbol_errs;
|
|
u_int32_t rx_pause_pkts, rx_nonpause_pkts;
|
|
};
|
|
|
|
struct bfe_softc
|
|
{
|
|
struct ifnet *bfe_ifp; /* interface info */
|
|
device_t bfe_dev;
|
|
device_t bfe_miibus;
|
|
bus_space_handle_t bfe_bhandle;
|
|
vm_offset_t bfe_vhandle;
|
|
bus_space_tag_t bfe_btag;
|
|
bus_dma_tag_t bfe_tag;
|
|
bus_dma_tag_t bfe_parent_tag;
|
|
bus_dma_tag_t bfe_tx_tag, bfe_rx_tag;
|
|
bus_dmamap_t bfe_tx_map, bfe_rx_map;
|
|
void *bfe_intrhand;
|
|
struct resource *bfe_irq;
|
|
struct resource *bfe_res;
|
|
struct callout_handle bfe_stat_ch;
|
|
struct bfe_hw_stats bfe_hwstats;
|
|
struct bfe_desc *bfe_tx_list, *bfe_rx_list;
|
|
struct bfe_data bfe_tx_ring[BFE_TX_LIST_CNT]; /* XXX */
|
|
struct bfe_data bfe_rx_ring[BFE_RX_LIST_CNT]; /* XXX */
|
|
struct mtx bfe_mtx;
|
|
u_int32_t bfe_flags;
|
|
u_int32_t bfe_imask;
|
|
u_int32_t bfe_dma_offset;
|
|
u_int32_t bfe_tx_cnt, bfe_tx_cons, bfe_tx_prod;
|
|
u_int32_t bfe_rx_cnt, bfe_rx_prod, bfe_rx_cons;
|
|
u_int32_t bfe_tx_dma, bfe_rx_dma;
|
|
u_int32_t bfe_link;
|
|
u_int8_t bfe_phyaddr; /* Address of the card's PHY */
|
|
u_int8_t bfe_mdc_port;
|
|
u_int8_t bfe_unit; /* interface number */
|
|
u_int8_t bfe_core_unit;
|
|
u_int8_t bfe_up;
|
|
u_char bfe_enaddr[6];
|
|
int bfe_if_flags;
|
|
char *bfe_vpd_prodname;
|
|
char *bfe_vpd_readonly;
|
|
};
|
|
|
|
struct bfe_type
|
|
{
|
|
u_int16_t bfe_vid;
|
|
u_int16_t bfe_did;
|
|
char *bfe_name;
|
|
};
|
|
|
|
#endif /* _BFE_H */
|