freebsd kernel with SKQ
Go to file
emaste c471307ee3 if_muge: only attach to LAN7800 Chip ID
This driver was developed for the LAN7800 and the register-compatible
LAN7515 (found on Raspberry Pi 3B+) and has only been tested on those
devices.

Sponsored by:	The FreeBSD Foundation
2018-05-22 20:00:56 +00:00
bin sh: Split CNL syntax category to avoid a check on state[level].syntax 2018-05-21 21:52:48 +00:00
cddl ctf dwarf: don't report "no dwarf entry" as if it were an error 2018-05-19 18:50:58 +00:00
contrib Revert last change to file/magic/Magdir/elf, it misidentifies most shared 2018-05-20 22:07:44 +00:00
crypto Merge upstream patch to unbreak tunnel forwarding. 2018-05-16 14:04:39 +00:00
etc devd: Always install devmatch.conf 2018-05-21 21:44:47 +00:00
gnu Use a script wrapper for <compress>grep 2018-04-25 13:23:58 +00:00
include Add implementations for clog(3), clogf(3), and clog(3). 2018-05-13 09:54:34 +00:00
kerberos5 various: general adoption of SPDX licensing ID tags. 2017-11-27 15:37:16 +00:00
lib Use __SCCSID for SCCS IDs in libkvm sources. 2018-05-22 15:52:22 +00:00
libexec Make rtld use libc_nossp_pic.a. Remove SSP shims. 2018-05-09 10:30:56 +00:00
release release: arm64: Use loader.efi as bootaa64.efi for RPI3 and PINE64 2018-05-21 11:58:02 +00:00
rescue Avoid referencing private lib names directly. 2017-11-10 07:53:02 +00:00
sbin Make the name of option that toggles IFCAP_HWRXTSTMP capability to 2018-05-18 12:12:24 +00:00
secure Upgrade to OpenSSH 7.7p1. 2018-05-11 13:22:43 +00:00
share bus_dma(9): Correct arm64 BUS_DMA_COHERENT implementation note 2018-05-22 13:45:24 +00:00
stand - Unbreak booting sparc64 kernels after the metadata unification in 2018-05-21 01:20:19 +00:00
sys if_muge: only attach to LAN7800 Chip ID 2018-05-22 20:00:56 +00:00
targets Add kernel and userspace code to dump the firmware state of supported 2018-03-08 15:21:56 +00:00
tests Vendor import of file 5.33 2018-05-20 04:56:46 +00:00
tools Add a SPD cache to speed up lookups. 2018-05-22 15:54:25 +00:00
usr.bin Add a SPD cache to speed up lookups. 2018-05-22 15:54:25 +00:00
usr.sbin Revert: r334016 2018-05-22 06:02:11 +00:00
.arcconfig callsign isn't required anymore 2016-09-29 06:19:45 +00:00
.arclint arc lint: ignore /tests/ in chmod 2017-12-19 03:38:06 +00:00
.gitattributes .git*: add gitattributes and gitignore 2017-12-25 21:07:54 +00:00
.gitignore Vendor import of OpenSSH 7.6p1. 2018-05-06 12:24:45 +00:00
COPYRIGHT Remove 'All Rights Reserved' from the collection copyright and templates. 2018-05-09 02:02:49 +00:00
LOCKS
MAINTAINERS top(1): add myself as a MAINTAIENR 2018-05-21 05:00:19 +00:00
Makefile Don't read SRC_ENV_CONF for MAKEOBJDIRPREFIX guard. 2018-03-03 23:23:23 +00:00
Makefile.inc1 Bump min supported release for building HEAD to 10.3 2018-04-27 19:50:30 +00:00
Makefile.libcompat X_COMPILER_* may not be defined. 2018-01-24 18:08:37 +00:00
Makefile.sys.inc AUTO_OBJ: For all top-level targets enforce using an OBJDIR. 2017-12-05 21:29:47 +00:00
ObsoleteFiles.inc Retire vxge(4). 2018-05-17 14:55:41 +00:00
README Vendor import of file 5.33 2018-05-20 04:56:46 +00:00
README.md Fix README.md formatting. 2018-03-02 14:42:08 +00:00
UPDATING Retire vxge(4). 2018-05-17 14:55:41 +00:00

FreeBSD Source:

This is the top level of the FreeBSD source directory. This file was last revised on: FreeBSD

For copyright information, please see the file COPYRIGHT in this directory (additional copyright information also exists for some sources in this tree - please see the specific source directories for more information).

The Makefile in this directory supports a number of targets for building components (or all) of the FreeBSD source tree. See build(7) and https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html for more information, including setting make(1) variables.

The buildkernel and installkernel targets build and install the kernel and the modules (see below). Please see the top of the Makefile in this directory for more information on the standard build targets and compile-time flags.

Building a kernel is a somewhat more involved process. See build(7), config(8), and https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html for more information.

Note: If you want to build and install the kernel with the buildkernel and installkernel targets, you might need to build world before. More information is available in the handbook.

The kernel configuration files reside in the sys/<arch>/conf sub-directory. GENERIC is the default configuration used in release builds. NOTES contains entries and documentation for all possible devices, not just those commonly used.

Source Roadmap:

bin		System/user commands.

cddl		Various commands and libraries under the Common Development
		and Distribution License.

contrib		Packages contributed by 3rd parties.

crypto		Cryptography stuff (see crypto/README).

etc		Template files for /etc.

gnu		Various commands and libraries under the GNU Public License.
		Please see gnu/COPYING* for more information.

include		System include files.

kerberos5	Kerberos5 (Heimdal) package.

lib		System libraries.

libexec		System daemons.

release		Release building Makefile & associated tools.

rescue		Build system for statically linked /rescue utilities.

sbin		System commands.

secure		Cryptographic libraries and commands.

share		Shared resources.

stand		Boot loader sources.

sys		Kernel sources.

tests		Regression tests which can be run by Kyua.  See tests/README
		for additional information.

tools		Utilities for regression testing and miscellaneous tasks.

usr.bin		User commands.

usr.sbin	System administration commands.

For information on synchronizing your source tree with one or more of the FreeBSD Project's development branches, please see:

https://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/current-stable.html