Masahide MAEKAWA c4fdea33fb Add ID (Keisokugiken Corp. HKS-0200 USBDAQ)		2000-03-29 15:07:20 +00:00
..
advansys	adv_pci.c:	2000-03-02 00:08:35 +00:00
aha	More pnpids.	2000-03-25 03:24:43 +00:00
ahb	Remove #include "eisa.h" and #if NEISA > 0	2000-01-29 18:22:33 +00:00
aic	- Added PC-98 Cbus frontend.	2000-03-29 14:32:34 +00:00
aic7xxx	o Correct the offsets into the syncrate table for paritcular	2000-03-18 22:28:20 +00:00
amd	Ahhrggg. Put the test for the compat shims AFTER the file that includes	2000-03-27 20:24:02 +00:00
amr	Fix detection of the card-ready-for-command state. Use an ultimate	2000-03-23 18:33:19 +00:00
an	Fix an instance of rman_get_start() than should be rman_get_bushandle().	2000-01-16 06:41:49 +00:00
ar	Ahhrggg. Put the test for the compat shims AFTER the file that includes	2000-03-27 20:24:02 +00:00
ata	Correct a mishap in phk's BIO_* changes.	2000-03-26 12:01:27 +00:00
atkbdc	Missing pieces of the last commit ;-(	2000-03-19 04:37:18 +00:00
bktr	The Leadtek Winfast TV2000 has one of the FM capable Tuners. Don't	2000-02-12 08:49:21 +00:00
buslogic	Remove #include "eisa.h" and #if NEISA > 0 - this is guaranteed by config.	2000-01-29 14:27:26 +00:00
cardbus
ccd	Rename the existing BUF_STRATEGY() to DEV_STRATEGY()	2000-03-20 11:29:10 +00:00
cs
cy	Ahhrggg. Put the test for the compat shims AFTER the file that includes	2000-03-27 20:24:02 +00:00
dc	Teach the 'dc' driver how to pick up settings left over by the	2000-03-11 05:20:56 +00:00
de	A fairly simple newbusification of if_de	2000-03-20 09:18:46 +00:00
dec
dgb	Remove #if NDGB > 0 and #if NDGM > 0	2000-01-29 18:42:45 +00:00
dpt	Remove #include "eisa.h" and #if NEISA > 0 as it's only ever compiled	2000-01-29 14:31:57 +00:00
ed	Bogusly returned zero always. Return 1 if we pass the checksum.	2000-03-20 23:29:27 +00:00
eisa	Pre 4.0 tidy up.	2000-01-14 07:14:17 +00:00
en	Ahhrggg. Put the test for the compat shims AFTER the file that includes	2000-03-27 20:24:02 +00:00
ep	Fix a problem that caused TCP fragments to be lost (among other things.)	2000-03-24 23:31:42 +00:00
ex	Add 'bootverbose' debug messages to assist with tracking down problems	2000-03-13 12:27:21 +00:00
fb	Remove #include "vga.h" and #if NVGA > 0 as it's implied by config.	2000-01-29 14:43:47 +00:00
fdc	Fix floppy driver after my isadma changes.	2000-03-25 21:20:23 +00:00
fe	Ratoc REX-9880/83 support (PC-98 only). This commit added functions	2000-03-29 12:44:19 +00:00
fxp	Added support for cards and on-motherboard NICs that use an SEEPROM	2000-03-28 04:41:42 +00:00
hea	Remove un-needed #include's.	2000-01-17 20:49:59 +00:00
hfa	Ensure that DMA mappings are freed in error situations.	2000-01-15 21:01:04 +00:00
ic
ida	Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new	2000-03-20 10:44:49 +00:00
ie	Remove #if NIE > 0 test, it's guaranteed to be true by config.	2000-01-29 14:41:52 +00:00
iicbus
isp	roll platform versions to 5.0	2000-03-15 18:49:44 +00:00
joy	Add ADS7182 as a known Joystick.	2000-01-18 08:38:35 +00:00
kbd	- Properly keep track of I/O port resources.	2000-03-19 03:25:13 +00:00
lnc	Ahhrggg. Put the test for the compat shims AFTER the file that includes	2000-03-27 20:24:02 +00:00
mc146818
mca	Set the RF_SHAREABLE flage when we allocate an IRQ.	2000-03-13 11:43:53 +00:00
mcd	Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new	2000-03-20 10:44:49 +00:00
md	Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new	2000-03-20 10:44:49 +00:00
mii
mlx	Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new	2000-03-20 10:44:49 +00:00
mse	- `Newbus'ified the driver.	2000-03-18 15:13:30 +00:00
pccard	Minor changes to some of the interfaces.	2000-03-26 07:01:52 +00:00
pcf	Port of ppbus standalone framework to the newbus system.	2000-01-14 00:18:06 +00:00
pci	Unused definitions.	2000-03-20 08:21:52 +00:00
pcic	Correct PnP ids for pcic-like cards.	2000-03-10 05:26:32 +00:00
pdq	Pre 4.0 tidy up.	2000-01-14 07:14:17 +00:00
ppbus	Isolate the Timecounter internals in their own two files.	2000-03-20 14:09:06 +00:00
ppc	Remove #include "ppc.h" and #if NPPC > 0 - this is always true as it is	2000-01-29 14:02:30 +00:00
ray	For version 0.9 change DNET output	2000-03-21 14:39:36 +00:00
rc	Remove #if NFOO > 0 (it's not required in most cases) and also where it	2000-01-29 16:00:34 +00:00
rp
scd	Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new	2000-03-20 10:44:49 +00:00
sf
si	Always leave SP_DCEN on (monitor DCD). Otherwise the firmware *really*	2000-01-25 16:45:54 +00:00
sio	Isolate the Timecounter internals in their own two files.	2000-03-20 14:09:06 +00:00
sk
smbus
sn	Don't execute MAC address initialization for non-pccard sn devices.	2000-01-22 17:24:16 +00:00
snp
sound	split up ess and sb code	2000-03-28 18:31:01 +00:00
speaker	Remove #if NFOO > 0 (it's not required in most cases) and also where it	2000-01-29 16:00:34 +00:00
sr	Ahhrggg. Put the test for the compat shims AFTER the file that includes	2000-03-27 20:24:02 +00:00
streams
sym	Simplifications:	2000-02-13 12:14:07 +00:00
syscons	White-space-only change. The file originally had screwed indentation.	2000-03-20 08:18:00 +00:00
ti	Add support for offloading IP/TCP/UDP checksums to NIC hardware which	2000-03-27 19:14:27 +00:00
tx
usb	Add ID (Keisokugiken Corp. HKS-0200 USBDAQ)	2000-03-29 15:07:20 +00:00
vinum	repair half-Danish b.b_iocmd damage where writes/reads weren't getting	2000-03-26 23:06:12 +00:00
vn	Remove B_READ, B_WRITE and B_FREEBUF and replace them with a new	2000-03-20 10:44:49 +00:00
vr
vx	Remove #if NVX > 0 and #if NEISA > 0 (and #include "eisa.h") as it's not	2000-01-29 14:50:32 +00:00
wi	Modify if_wi.c to call bpfdetach(ifp) before if_detach(ifp), so as to	2000-03-19 05:46:50 +00:00
wl
xe	Remove #if 0'ed reference to isa_device->id_alive	2000-01-23 18:21:20 +00:00