17285ea2d0
Since there have been major updates to both drivers in r339338, refresh the man pages with new and updated information. Reviewed by: sbruno@, 0mp@, jeffrey.e.pieper@intel.com, manpages Approved by: re (gjb@, kib@) Sponsored by: Intel Corporation Differential Revision: https://reviews.freebsd.org/D15927
295 lines
9.0 KiB
Groff
295 lines
9.0 KiB
Groff
.\" Copyright (c) 2013-2018, Intel Corporation
|
|
.\" All rights reserved.
|
|
.\"
|
|
.\" Redistribution and use in source and binary forms, with or without
|
|
.\" modification, are permitted provided that the following conditions are met:
|
|
.\"
|
|
.\" 1. Redistributions of source code must retain the above copyright notice,
|
|
.\" this list of conditions and the following disclaimer.
|
|
.\"
|
|
.\" 2. Redistributions in binary form must reproduce the above copyright
|
|
.\" notice, this list of conditions and the following disclaimer in the
|
|
.\" documentation and/or other materials provided with the distribution.
|
|
.\"
|
|
.\" 3. Neither the name of the Intel Corporation nor the names of its
|
|
.\" contributors may be used to endorse or promote products derived from
|
|
.\" this software without specific prior written permission.
|
|
.\"
|
|
.\" THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
.\" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
.\" IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
.\" ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
.\" LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
.\" CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
.\" SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
.\" INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
.\" CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
.\" ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
.\" POSSIBILITY OF SUCH DAMAGE.
|
|
.\"
|
|
.\" * Other names and brands may be claimed as the property of others.
|
|
.\"
|
|
.\" $FreeBSD$
|
|
.\"
|
|
.Dd October 5, 2018
|
|
.Dt IXL 4
|
|
.Os
|
|
.Sh NAME
|
|
.Nm ixl
|
|
.Nd "Intel Ethernet 700 Series Driver"
|
|
.Sh SYNOPSIS
|
|
To compile this driver into the kernel, place the following lines in your
|
|
kernel configuration file:
|
|
.Bd -ragged -offset indent
|
|
.Cd "device ixl"
|
|
.Ed
|
|
.Pp
|
|
To load the driver as a module at boot time, place the following lines in
|
|
.Xr loader.conf 5 :
|
|
.Bd -literal -offset indent
|
|
if_ixl_load="YES"
|
|
.Ed
|
|
.Sh DESCRIPTION
|
|
.Ss Features
|
|
The
|
|
.Nm
|
|
driver provides support for any PCI Express adapter or LOM
|
|
(LAN On Motherboard)
|
|
in the Intel Ethernet 700 Series.
|
|
As of this writing, the series includes devices with these model numbers:
|
|
.Pp
|
|
.Bl -bullet -compact
|
|
.It
|
|
XL710 (40G)
|
|
.It
|
|
X710 (10G)
|
|
.It
|
|
XXV710 (25G)
|
|
.It
|
|
X722 (10G)
|
|
.El
|
|
.Pp
|
|
The driver supports Jumbo Frames, TX/RX checksum offload,
|
|
TCP segmentation offload (TSO), Large Receive Offload (LRO), VLAN
|
|
tag insertion/extraction, VLAN checksum offload, VLAN TSO, and
|
|
Receive Side Steering (RSS), all for both IPv4 and IPv6.
|
|
For further hardware information and questions related to hardware
|
|
requirements, see
|
|
.Pa http://support.intel.com/ .
|
|
.Pp
|
|
Support for Jumbo Frames is provided via the interface MTU setting.
|
|
Selecting an MTU larger than 1500 bytes with the
|
|
.Xr ifconfig 8
|
|
utility configures the adapter to receive and transmit Jumbo Frames.
|
|
The maximum MTU size for Jumbo Frames is 9706.
|
|
.Pp
|
|
Offloads are also controlled via the interface, for instance,
|
|
checksumming for both IPv4 and IPv6 can be set and unset, TSO4
|
|
and/or TSO6, and finally LRO can be set and unset.
|
|
.Pp
|
|
For more information on configuring this device, see
|
|
.Xr ifconfig 8 .
|
|
.Ss Additional Utilities
|
|
There are additional tools available from Intel to help configure and update
|
|
the adapters covered by this driver.
|
|
These tools can be downloaded directly from Intel at
|
|
.Pa downloadcenter.intel.com ,
|
|
by searching for their names, or by installing certain packages:
|
|
.Bl -item
|
|
.It
|
|
To change the behavior of the QSFP+ ports on XL710 adapters, use the
|
|
Intel QCU (QSFP+ configuration utility); installed by the
|
|
.Em sysutils/intel-qcu
|
|
package.
|
|
.It
|
|
To update the firmware on an adapter, use the Intel Non-Volatile Memory (NVM)
|
|
Update Utility; installed by the
|
|
.Em sysutils/intel-nvmupdate
|
|
package.
|
|
.It
|
|
Drivers are provided by Intel outside of the
|
|
.Fx
|
|
kernel; install the
|
|
.Em net/intel-ixl-kmod
|
|
package for the latest driver.
|
|
.El
|
|
.Sh HARDWARE
|
|
Most adapters in the Intel Ethernet 700 Series with SFP+/SFP28/QSFP+ cages
|
|
have firmware that requires that Intel qualified modules are used; these
|
|
qualified modules are listed below.
|
|
This qualification check cannot be disabled by the driver.
|
|
.Pp
|
|
The
|
|
.Nm
|
|
driver supports 40Gb Ethernet adapters with these QSFP+ modules:
|
|
.Pp
|
|
.Bl -bullet -compact
|
|
.It
|
|
Intel 4x10G/40G QSFP+ 40GBASE-SR4 E40GQSFPSR
|
|
.It
|
|
Intel 4x10G/40G QSFP+ 40GBASE-LR4 E40GQSFPLR
|
|
.El
|
|
.Pp
|
|
The
|
|
.Nm
|
|
driver supports 25Gb Ethernet adapters with these SFP28 modules:
|
|
.Pp
|
|
.Bl -bullet -compact
|
|
.It
|
|
Intel 10G/25G SFP28 25GBASE-SR E25GSFP28SR
|
|
.It
|
|
Intel 10G/25G SFP28 25GBASE-SR E25GSFP28SRX (Extended Temp)
|
|
.El
|
|
.Pp
|
|
The
|
|
.Nm
|
|
driver supports 25Gb and 10Gb Ethernet adapters with these SFP+ modules:
|
|
.Pp
|
|
.Bl -bullet -compact
|
|
.It
|
|
Intel 1G/10G SFP+ SR FTLX8571D3BCV-IT
|
|
.It
|
|
Intel 1G/10G SFP+ SR AFBR-703SDZ-IN2
|
|
.It
|
|
Intel 1G/10G SFP+ LR FTLX1471D3BCV-IT
|
|
.It
|
|
Intel 1G/10G SFP+ LR AFCT-701SDZ-IN2
|
|
.It
|
|
Intel 1G/10G SFP+ 10GBASE-SR E10GSFPSR
|
|
.It
|
|
Intel 10G SFP+ 10GBASE-SR E10GSFPSRX (Extended Temp)
|
|
.It
|
|
Intel 1G/10G SFP+ 10GBASE-LR E10GSFPLR
|
|
.El
|
|
.Pp
|
|
Note that adapters also support all passive and active
|
|
limiting direct attach cables that comply with SFF-8431 v4.1 and
|
|
SFF-8472 v10.4 specifications.
|
|
.Pp
|
|
This is not an exhaustive list; please consult product documentation for an
|
|
up-to-date list of supported media.
|
|
.Sh LOADER TUNABLES
|
|
Tunables can be set at the
|
|
.Xr loader 8
|
|
prompt before booting the kernel or stored in
|
|
.Xr loader.conf 5 .
|
|
.Bl -tag -width indent
|
|
.It Va hw.ixl.rx_itr
|
|
The RX interrupt rate value, set to 62 (124 usec) by default.
|
|
.It Va hw.ixl.tx_itr
|
|
The TX interrupt rate value, set to 122 (244 usec) by default.
|
|
.It Va hw.ixl.i2c_access_method
|
|
Access method that driver will use for I2C read and writes via
|
|
.Xr sysctl 8
|
|
or verbose
|
|
.Xr ifconfig 8
|
|
information display:
|
|
.Bd -literal -offset indent
|
|
0 - best available method
|
|
1 - bit bang via I2CPARAMS register
|
|
2 - register read/write via I2CCMD register
|
|
3 - Use Admin Queue command (default best)
|
|
.Ed
|
|
.Pp
|
|
Using the Admin Queue is only supported on 710 devices with FW version 1.7 or
|
|
newer.
|
|
Set to 0 by default.
|
|
.It Va hw.ixl.enable_tx_fc_filter
|
|
Filter out packets with Ethertype 0x8808 from being sent out by non-adapter
|
|
sources.
|
|
This prevents (potentially untrusted) software or
|
|
.Xr iavf 4
|
|
devices from sending out flow control packets and creating a DoS (Denial of
|
|
Service) event.
|
|
Enabled by default.
|
|
.It Va hw.ixl.enable_head_writeback
|
|
When the driver is finding the last TX descriptor processed by the hardware,
|
|
use a value written to memory by the hardware instead of scanning the
|
|
descriptor ring for completed descriptors.
|
|
Enabled by default; disable to mimic the TX behavior found in
|
|
.Xr ixgbe 4 .
|
|
.El
|
|
.Sh SYSCTL PROCEDURES
|
|
.Bl -tag -width indent
|
|
.It Va dev.ixl.#.fc
|
|
Sets the 802.3x flow control mode that the adapter will advertise on the link.
|
|
A value of 0 disables flow control, 3 enables full, 1 is RX, and 2 is TX pause.
|
|
.Pp
|
|
The negotiated flow control setting can be viewed in
|
|
.Xr ifconfig 8 ,
|
|
in the interface's media field.
|
|
.It Va dev.ixl.#.advertise_speed
|
|
Set the speeds that the interface will advertise on the link.
|
|
.Va dev.ixl.#.supported_speeds
|
|
contains the speeds that are allowed to be set.
|
|
.It Va dev.ixl.#.current_speed
|
|
Displays the current speed.
|
|
.It Va dev.ixl.#.fw_version
|
|
Displays the current firmware and NVM versions of the adapter.
|
|
.El
|
|
.Sh INTERRUPT STORMS
|
|
It is important to note that 40G operation can generate high
|
|
numbers of interrupts, often incorrectly being interpreted as
|
|
a storm condition in the kernel.
|
|
It is suggested that this be resolved by setting:
|
|
.Bl -tag -width indent
|
|
.It Va hw.intr_storm_threshold: 0
|
|
.El
|
|
.Sh IOVCTL OPTIONS
|
|
The driver supports additional optional parameters for created VFs
|
|
(Virtual Functions) when using
|
|
.Xr iovctl 8 :
|
|
.Bl -tag -width indent
|
|
.It mac-addr Pq unicast-mac
|
|
Set the Ethernet MAC address that the VF will use.
|
|
If unspecified, the VF will use a randomly generated MAC address.
|
|
.It mac-anti-spoof Pq bool
|
|
Prevent the VF from sending Ethernet frames with a source address
|
|
that does not match its own.
|
|
.It allow-set-mac Pq bool
|
|
Allow the VF to set its own Ethernet MAC address
|
|
.It allow-promisc Pq bool
|
|
Allow the VF to inspect all of the traffic sent to the port.
|
|
.It num-queues Pq uint16_t
|
|
Specify the number of queues the VF will have.
|
|
By default, this is set to the number of MSI-X vectors supported by the VF
|
|
minus one.
|
|
.El
|
|
.Pp
|
|
An up to date list of parameters and their defaults can be found by using
|
|
.Xr iovctl 8
|
|
with the -S option.
|
|
.Sh SUPPORT
|
|
For general information and support,
|
|
go to the Intel support website at:
|
|
.Pa http://support.intel.com/ .
|
|
.Pp
|
|
If an issue is identified with this driver with a supported adapter,
|
|
email all the specific information related to the issue to
|
|
.Mt freebsd@intel.com .
|
|
.Sh SEE ALSO
|
|
.Xr arp 4 ,
|
|
.Xr iavf 4 ,
|
|
.Xr netintro 4 ,
|
|
.Xr vlan 4 ,
|
|
.Xr ifconfig 8 ,
|
|
.Xr iovctl 8 ,
|
|
.Xr iflib 9
|
|
.Sh HISTORY
|
|
The
|
|
.Nm
|
|
device driver first appeared in
|
|
.Fx 10.1 .
|
|
It was converted to use
|
|
.Xr iflib 9
|
|
in
|
|
.Fx 12 .
|
|
.Sh AUTHORS
|
|
.An -nosplit
|
|
The
|
|
.Nm
|
|
driver was written by
|
|
.An Jack Vogel Aq Mt jfv@freebsd.org
|
|
and
|
|
.An Eric Joyner Aq Mt erj@freebsd.org .
|