freebsd-skq/sys/mips/sentry5/s5_machdep.c
Juli Mallett 312af517e3 Remove platform APIs which are not used by any code and which had only stub
implementations or no implementation on all platforms.

Some of these functions might be good ideas, but their semantics were unclear
given the lack of implementation, and an unlucky porter could be fooled into
trying to implement them or, worse, being baffled when something like
platform_trap_enter() failed to be called.
2012-03-12 07:34:15 +00:00

225 lines
5.3 KiB
C

/*-
* Copyright (c) 2007 Bruce M. Simpson.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_ddb.h"
#include <sys/param.h>
#include <sys/conf.h>
#include <sys/kernel.h>
#include <sys/systm.h>
#include <sys/imgact.h>
#include <sys/bio.h>
#include <sys/buf.h>
#include <sys/bus.h>
#include <sys/cpu.h>
#include <sys/cons.h>
#include <sys/exec.h>
#include <sys/ucontext.h>
#include <sys/proc.h>
#include <sys/kdb.h>
#include <sys/ptrace.h>
#include <sys/reboot.h>
#include <sys/signalvar.h>
#include <sys/sysent.h>
#include <sys/sysproto.h>
#include <sys/user.h>
#include <vm/vm.h>
#include <vm/vm_object.h>
#include <vm/vm_page.h>
#include <vm/vm_pager.h>
#include <machine/cache.h>
#include <machine/clock.h>
#include <machine/cpu.h>
#include <machine/cpuinfo.h>
#include <machine/cpufunc.h>
#include <machine/cpuregs.h>
#include <machine/hwfunc.h>
#include <machine/intr_machdep.h>
#include <machine/locore.h>
#include <machine/md_var.h>
#include <machine/pte.h>
#include <machine/sigframe.h>
#include <machine/trap.h>
#include <machine/vmparam.h>
#include <mips/sentry5/s5reg.h>
#ifdef CFE
#include <dev/cfe/cfe_api.h>
#endif
extern int *edata;
extern int *end;
void
platform_cpu_init()
{
/* Nothing special */
}
static void
mips_init(void)
{
int i, j;
printf("entry: mips_init()\n");
#ifdef CFE
/*
* Query DRAM memory map from CFE.
*/
physmem = 0;
for (i = 0; i < 10; i += 2) {
int result;
uint64_t addr, len, type;
result = cfe_enummem(i, 0, &addr, &len, &type);
if (result < 0) {
phys_avail[i] = phys_avail[i + 1] = 0;
break;
}
if (type != CFE_MI_AVAILABLE)
continue;
phys_avail[i] = addr;
if (i == 0 && addr == 0) {
/*
* If this is the first physical memory segment probed
* from CFE, omit the region at the start of physical
* memory where the kernel has been loaded.
*/
phys_avail[i] += MIPS_KSEG0_TO_PHYS(kernel_kseg0_end);
}
phys_avail[i + 1] = addr + len;
physmem += len;
}
realmem = btoc(physmem);
#endif
for (j = 0; j < i; j++)
dump_avail[j] = phys_avail[j];
physmem = realmem;
init_param1();
init_param2(physmem);
mips_cpu_init();
pmap_bootstrap();
mips_proc0_init();
mutex_init();
kdb_init();
#ifdef KDB
if (boothowto & RB_KDB)
kdb_enter(KDB_WHY_BOOTFLAGS, "Boot flags requested debugger");
#endif
}
void
platform_reset(void)
{
#if defined(CFE)
cfe_exit(0, 0);
#else
*((volatile uint8_t *)MIPS_PHYS_TO_KSEG1(SENTRY5_EXTIFADR)) = 0x80;
#endif
}
void
platform_start(__register_t a0, __register_t a1, __register_t a2,
__register_t a3)
{
vm_offset_t kernend;
uint64_t platform_counter_freq;
/* clear the BSS and SBSS segments */
kernend = (vm_offset_t)&end;
memset(&edata, 0, kernend - (vm_offset_t)(&edata));
mips_postboot_fixup();
/* Initialize pcpu stuff */
mips_pcpu0_init();
#ifdef CFE
/*
* Initialize CFE firmware trampolines before
* we initialize the low-level console.
*
* CFE passes the following values in registers:
* a0: firmware handle
* a2: firmware entry point
* a3: entry point seal
*/
if (a3 == CFE_EPTSEAL)
cfe_init(a0, a2);
#endif
cninit();
mips_init();
# if 0
/*
* Probe the Broadcom Sentry5's on-chip PLL clock registers
* and discover the CPU pipeline clock and bus clock
* multipliers from this.
* XXX: Wrong place. You have to ask the ChipCommon
* or External Interface cores on the SiBa.
*/
uint32_t busmult, cpumult, refclock, clkcfg1;
#define S5_CLKCFG1_REFCLOCK_MASK 0x0000001F
#define S5_CLKCFG1_BUSMULT_MASK 0x000003E0
#define S5_CLKCFG1_BUSMULT_SHIFT 5
#define S5_CLKCFG1_CPUMULT_MASK 0xFFFFFC00
#define S5_CLKCFG1_CPUMULT_SHIFT 10
counter_freq = 100000000; /* XXX */
clkcfg1 = s5_rd_clkcfg1();
printf("clkcfg1 = 0x%08x\n", clkcfg1);
refclock = clkcfg1 & 0x1F;
busmult = ((clkcfg1 & 0x000003E0) >> 5) + 1;
cpumult = ((clkcfg1 & 0xFFFFFC00) >> 10) + 1;
printf("refclock = %u\n", refclock);
printf("busmult = %u\n", busmult);
printf("cpumult = %u\n", cpumult);
counter_freq = cpumult * refclock;
# else
platform_counter_freq = 200 * 1000 * 1000; /* Sentry5 is 200MHz */
# endif
mips_timer_init_params(platform_counter_freq, 0);
}