freebsd-skq/sys/dev/mii/ip1000phyreg.h
Pyun YongHyeon a76215ece3 Add support for IC Plus IP1001 PHY.
Tested by:	Stuart Fraser < stuart AT stuartfraser DOT net >
2008-04-05 00:52:07 +00:00

187 lines
6.6 KiB
C

/*-
* Copyright (c) 2006, Pyun YongHyeon
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice unmodified, this list of conditions, and the following
* disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
* $FreeBSD$
*/
#ifndef _DEV_MII_IP1000PHYREG_H_
#define _DEV_MII_IP1000PHYREG_H_
/*
* Registers for the IC Plus IP1000A internal PHY.
*/
/* Control register */
#define IP1000PHY_MII_BMCR 0x00
#define IP1000PHY_BMCR_FDX 0x0100
#define IP1000PHY_BMCR_STARTNEG 0x0200
#define IP1000PHY_BMCR_ISO 0x0400
#define IP1000PHY_BMCR_PDOWN 0x0800
#define IP1000PHY_BMCR_AUTOEN 0x1000
#define IP1000PHY_BMCR_LOOP 0x4000
#define IP1000PHY_BMCR_RESET 0x8000
#define IP1000PHY_BMCR_10 0x0000
#define IP1000PHY_BMCR_100 0x2000
#define IP1000PHY_BMCR_1000 0x0040
/* Status register */
#define IP1000PHY_MII_BMSR 0x01
#define IP1000PHY_BMSR_EXT 0x0001
#define IP1000PHY_BMSR_LINK 0x0004
#define IP1000PHY_BMSR_ANEG 0x0008
#define IP1000PHY_BMSR_RFAULT 0x0010
#define IP1000PHY_BMSR_ANEGCOMP 0x0020
#define IP1000PHY_BMSR_EXTSTS 0x0100
#define IP1000PHY_MII_ID1 0x02
/* Autonegotiation advertisement register */
#define IP1000PHY_MII_ANAR 0x04
#define IP1000PHY_ANAR_10T 0x0020
#define IP1000PHY_ANAR_10T_FDX 0x0040
#define IP1000PHY_ANAR_100TX 0x0080
#define IP1000PHY_ANAR_100TX_FDX 0x0100
#define IP1000PHY_ANAR_100T4 0x0200
#define IP1000PHY_ANAR_PAUSE 0x0400
#define IP1000PHY_ANAR_APAUSE 0x0800
#define IP1000PHY_ANAR_RFAULT 0x2000
#define IP1000PHY_ANAR_NP 0x8000
/* Autonegotiation link parnet ability register */
#define IP1000PHY_MII_ANLPAR 0x05
#define IP1000PHY_ANLPAR_10T 0x0020
#define IP1000PHY_ANLPAR_10T_FDX 0x0040
#define IP1000PHY_ANLPAR_100TX 0x0080
#define IP1000PHY_ANLPAR_100TX_FDX 0x0100
#define IP1000PHY_ANLPAR_100T4 0x0200
#define IP1000PHY_ANLPAR_PAUSE 0x0400
#define IP1000PHY_ANLPAR_APAUSE 0x0800
#define IP1000PHY_ANLPAR_RFAULT 0x2000
#define IP1000PHY_ANLPAR_ACK 0x4000
#define IP1000PHY_ANLPAR_NP 0x8000
/* Autonegotiation expansion register */
#define IP1000PHY_MII_ANER 0x06
#define IP1000PHY_ANER_LPNWAY 0x0001
#define IP1000PHY_ANER_PRCVD 0x0002
#define IP1000PHY_ANER_NEXTP 0x0004
#define IP1000PHY_ANER_LPNEXTP 0x0008
#define IP1000PHY_ANER_PDF 0x0100
/* Autonegotiation next page transmit register */
#define IP1000PHY_MII_NEXTP 0x07
#define IP1000PHY_NEXTP_MSGC 0x0001
#define IP1000PHY_NEXTP_TOGGLE 0x0800
#define IP1000PHY_NEXTP_ACK2 0x1000
#define IP1000PHY_NEXTP_MSGP 0x2000
#define IP1000PHY_NEXTP_NEXTP 0x8000
/* Autonegotiation link partner next page register */
#define IP1000PHY_MII_NEXTPLP 0x08
#define IP1000PHY_NEXTPLP_MSGC 0x0001
#define IP1000PHY_NEXTPLP_TOGGLE 0x0800
#define IP1000PHY_NEXTPLP_ACK2 0x1000
#define IP1000PHY_NEXTPLP_MSGP 0x2000
#define IP1000PHY_NEXTPLP_ACK 0x4000
#define IP1000PHY_NEXTPLP_NEXTP 0x8000
/* 1000baseT control register */
#define IP1000PHY_MII_1000CR 0x09
#define IP1000PHY_1000CR_1000T 0x0100
#define IP1000PHY_1000CR_1000T_FDX 0x0200
#define IP1000PHY_1000CR_MASTER 0x0400
#define IP1000PHY_1000CR_MMASTER 0x0800
#define IP1000PHY_1000CR_MANUAL 0x1000
#define IP1000PHY_1000CR_TMNORMAL 0x0000
#define IP1000PHY_1000CR_TM1 0x2000
#define IP1000PHY_1000CR_TM2 0x4000
#define IP1000PHY_1000CR_TM3 0x6000
#define IP1000PHY_1000CR_TM4 0x8000
/* 1000baseT status register */
#define IP1000PHY_MII_1000SR 0x0A
#define IP1000PHY_1000SR_LP 0x0400
#define IP1000PHY_1000SR_LP_FDX 0x0800
#define IP1000PHY_1000SR_RXSTAT 0x1000
#define IP1000PHY_1000SR_LRXSTAT 0x2000
#define IP1000PHY_1000SR_MASTER 0x4000
#define IP1000PHY_1000SR_MASTERF 0x8000
/* Extended status register */
#define IP1000PHY_MII_EXTSTS 0x0F
#define IP1000PHY_EXTSTS_1000T 0x1000
#define IP1000PHY_EXTSTS_1000T_FDX 0x2000
#define IP1000PHY_EXTSTS_1000X 0x4000
#define IP1000PHY_EXTSTS_1000X_FDX 0x8000
/* PHY specific control & status register. IP1001 only. */
#define IP1000PHY_SCSR 0x10
#define IP1000PHY_SCSR_RXPHASE_SEL 0x0001
#define IP1000PHY_SCSR_TXPHASE_SEL 0x0002
#define IP1000PHY_SCSR_REPEATOR_MODE 0x0004
#define IP1000PHY_SCSR_RESERVED1_DEF 0x0008
#define IP1000PHY_SCSR_RXCLK_DRV_MASK 0x0060
#define IP1000PHY_SCSR_RXCLK_DRV_DEF 0x0040
#define IP1000PHY_SCSR_RXD_DRV_MASK 0x0180
#define IP1000PHY_SCSR_RXD_DRV_DEF 0x0100
#define IP1000PHY_SCSR_JABBER_ENB 0x0200
#define IP1000PHY_SCSR_HEART_BEAT_ENB 0x0400
#define IP1000PHY_SCSR_DOWNSHIFT_ENB 0x0800
#define IP1000PHY_SCSR_RESERVED2_DEF 0x1000
#define IP1000PHY_SCSR_LED_DRV_4MA 0x0000
#define IP1000PHY_SCSR_LED_DRV_8MA 0x2000
#define IP1000PHY_SCSR_LED_MODE_MASK 0xC000
#define IP1000PHY_SCSR_LED_MODE_DEF 0x0000
/* PHY link status register. IP1001 only. */
#define IP1000PHY_LSR 0x11
#define IP1000PHY_LSR_JABBER_DET 0x0200
#define IP1000PHY_LSR_APS_SLEEP 0x0400
#define IP1000PHY_LSR_MDIX 0x0800
#define IP1000PHY_LSR_FULL_DUPLEX 0x1000
#define IP1000PHY_LSR_SPEED_10 0x0000
#define IP1000PHY_LSR_SPEED_100 0x2000
#define IP1000PHY_LSR_SPEED_1000 0x4000
#define IP1000PHY_LSR_SPEED_MASK 0x6000
#define IP1000PHY_LSR_LINKUP 0x8000
/* PHY specific control register 2. IP1001 only. */
#define IP1000PHY_SCR
#define IP1000PHY_SCR_SEW_RATE_MASK 0x0003
#define IP1000PHY_SCR_SEW_RATE_DEF 0x0003
#define IP1000PHY_SCR_AUTO_XOVER 0x0004
#define IP1000PHY_SCR_SPEED_10_100_ENB 0x0040
#define IP1000PHY_SCR_FIFO_LATENCY_2 0x0000
#define IP1000PHY_SCR_FIFO_LATENCY_3 0x0080
#define IP1000PHY_SCR_FIFO_LATENCY_4 0x0100
#define IP1000PHY_SCR_FIFO_LATENCY_5 0x0180
#define IP1000PHY_SCR_MDIX_ENB 0x0200
#define IP1000PHY_SCR_RESERVED_DEF 0x0400
#define IP1000PHY_SCR_APS_ON 0x0800
#endif /* _DEV_MII_IP1000PHYREG_H_ */