freebsd-skq/sbin/newfs/newfs.c
Kirk McKusick 1c85e6a35d This commit adds basic support for the UFS2 filesystem. The UFS2
filesystem expands the inode to 256 bytes to make space for 64-bit
block pointers. It also adds a file-creation time field, an ability
to use jumbo blocks per inode to allow extent like pointer density,
and space for extended attributes (up to twice the filesystem block
size worth of attributes, e.g., on a 16K filesystem, there is space
for 32K of attributes). UFS2 fully supports and runs existing UFS1
filesystems. New filesystems built using newfs can be built in either
UFS1 or UFS2 format using the -O option. In this commit UFS1 is
the default format, so if you want to build UFS2 format filesystems,
you must specify -O 2. This default will be changed to UFS2 when
UFS2 proves itself to be stable. In this commit the boot code for
reading UFS2 filesystems is not compiled (see /sys/boot/common/ufsread.c)
as there is insufficient space in the boot block. Once the size of the
boot block is increased, this code can be defined.

Things to note: the definition of SBSIZE has changed to SBLOCKSIZE.
The header file <ufs/ufs/dinode.h> must be included before
<ufs/ffs/fs.h> so as to get the definitions of ufs2_daddr_t and
ufs_lbn_t.

Still TODO:
Verify that the first level bootstraps work for all the architectures.
Convert the utility ffsinfo to understand UFS2 and test growfs.
Add support for the extended attribute storage. Update soft updates
to ensure integrity of extended attribute storage. Switch the
current extended attribute interfaces to use the extended attribute
storage. Add the extent like functionality (framework is there,
but is currently never used).

Sponsored by: DARPA & NAI Labs.
Reviewed by:	Poul-Henning Kamp <phk@freebsd.org>
2002-06-21 06:18:05 +00:00

412 lines
12 KiB
C

/*
* Copyright (c) 2002 Networks Associates Technology, Inc.
* All rights reserved.
*
* This software was developed for the FreeBSD Project by Marshall
* Kirk McKusick and Network Associates Laboratories, the Security
* Research Division of Network Associates, Inc. under DARPA/SPAWAR
* contract N66001-01-C-8035 ("CBOSS"), as part of the DARPA CHATS
* research program
*
* Copyright (c) 1982, 1989, 1993
* The Regents of the University of California. All rights reserved.
* (c) UNIX System Laboratories, Inc.
* Copyright (c) 1983, 1989, 1993, 1994
* The Regents of the University of California. All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the University of
* California, Berkeley and its contributors.
* 4. Neither the name of the University nor the names of its contributors
* may be used to endorse or promote products derived from this software
* without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE REGENTS AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE REGENTS OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#ifndef lint
static const char copyright[] =
"@(#) Copyright (c) 1983, 1989, 1993, 1994\n\
The Regents of the University of California. All rights reserved.\n";
#endif /* not lint */
#ifndef lint
#if 0
static char sccsid[] = "@(#)newfs.c 8.13 (Berkeley) 5/1/95";
#endif
static const char rcsid[] =
"$FreeBSD$";
#endif /* not lint */
/*
* newfs: friendly front end to mkfs
*/
#include <sys/param.h>
#include <sys/stat.h>
#include <sys/disk.h>
#include <sys/disklabel.h>
#include <sys/file.h>
#include <sys/mount.h>
#include <ufs/ufs/dir.h>
#include <ufs/ufs/dinode.h>
#include <ufs/ffs/fs.h>
#include <ufs/ufs/ufsmount.h>
#include <ctype.h>
#include <err.h>
#include <errno.h>
#include <paths.h>
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <syslog.h>
#include <unistd.h>
#include "newfs.h"
/*
* The following two constants set the default block and fragment sizes.
* Both constants must be a power of 2 and meet the following constraints:
* MINBSIZE <= DESBLKSIZE <= MAXBSIZE
* sectorsize <= DESFRAGSIZE <= DESBLKSIZE
* DESBLKSIZE / DESFRAGSIZE <= 8
*/
#define DFL_FRAGSIZE 2048
#define DFL_BLKSIZE 16384
/*
* Cylinder groups may have up to MAXBLKSPERCG blocks. The actual
* number used depends upon how much information can be stored
* in a cylinder group map which must fit in a single filesystem
* block. The default is to use as many as possible blocks per group.
*/
#define MAXBLKSPERCG 0x7fffffff /* desired fs_fpg ("infinity") */
/*
* MAXBLKPG determines the maximum number of data blocks which are
* placed in a single cylinder group. The default is one indirect
* block worth of data blocks.
*/
#define MAXBLKPG(bsize) ((bsize) / sizeof(ufs2_daddr_t))
/*
* Each filesystem has a number of inodes statically allocated.
* We allocate one inode slot per NFPI fragments, expecting this
* to be far more than we will ever need.
*/
#define NFPI 4
int Nflag; /* run without writing filesystem */
int Oflag = 1; /* filesystem format (1 => UFS1, 2 => UFS2) */
int Rflag; /* regression test */
int Uflag; /* enable soft updates for filesystem */
quad_t fssize; /* file system size */
int sectorsize; /* bytes/sector */
int realsectorsize; /* bytes/sector in hardware */
int fsize = 0; /* fragment size */
int bsize = 0; /* block size */
int maxbsize = 0; /* maximum clustering */
int maxblkspercg = MAXBLKSPERCG; /* maximum blocks per cylinder group */
int minfree = MINFREE; /* free space threshold */
int opt = DEFAULTOPT; /* optimization preference (space or time) */
int density; /* number of bytes per inode */
int maxcontig = 0; /* max contiguous blocks to allocate */
int maxbpg; /* maximum blocks per file in a cyl group */
int avgfilesize = AVFILESIZ;/* expected average file size */
int avgfilesperdir = AFPDIR;/* expected number of files per directory */
int fso; /* filedescriptor to device */
static char device[MAXPATHLEN];
static char *disktype;
static int unlabeled;
static struct disklabel *getdisklabel(char *s);
static void rewritelabel(char *s, struct disklabel *lp);
static void usage(void);
int
main(int argc, char *argv[])
{
struct partition *pp;
struct disklabel *lp;
struct partition oldpartition;
struct stat st;
char *cp, *special;
int ch;
off_t mediasize;
while ((ch = getopt(argc, argv,
"NO:RS:T:Ua:b:c:d:e:f:g:h:i:m:o:s:")) != -1)
switch (ch) {
case 'N':
Nflag = 1;
break;
case 'O':
if ((Oflag = atoi(optarg)) < 1 || Oflag > 2)
errx(1, "%s: bad filesystem format value",
optarg);
break;
case 'R':
Rflag = 1;
break;
case 'S':
if ((sectorsize = atoi(optarg)) <= 0)
errx(1, "%s: bad sector size", optarg);
break;
case 'T':
disktype = optarg;
break;
case 'U':
Uflag = 1;
break;
case 'a':
if ((maxcontig = atoi(optarg)) <= 0)
errx(1, "%s: bad maximum contiguous blocks",
optarg);
break;
case 'b':
if ((bsize = atoi(optarg)) < MINBSIZE)
errx(1, "%s: bad block size", optarg);
break;
case 'c':
if ((maxblkspercg = atoi(optarg)) <= 0)
errx(1, "%s: bad blocks per cylinder group",
optarg);
break;
case 'd':
if ((maxbsize = atoi(optarg)) < MINBSIZE)
errx(1, "%s: bad extent block size", optarg);
break;
case 'e':
if ((maxbpg = atoi(optarg)) <= 0)
errx(1, "%s: bad blocks per file in a cylinder group",
optarg);
break;
case 'f':
if ((fsize = atoi(optarg)) <= 0)
errx(1, "%s: bad fragment size", optarg);
break;
case 'g':
if ((avgfilesize = atoi(optarg)) <= 0)
errx(1, "%s: bad average file size", optarg);
break;
case 'h':
if ((avgfilesperdir = atoi(optarg)) <= 0)
errx(1, "%s: bad average files per dir", optarg);
break;
case 'i':
if ((density = atoi(optarg)) <= 0)
errx(1, "%s: bad bytes per inode", optarg);
break;
case 'm':
if ((minfree = atoi(optarg)) < 0 || minfree > 99)
errx(1, "%s: bad free space %%", optarg);
break;
case 'o':
if (strcmp(optarg, "space") == 0)
opt = FS_OPTSPACE;
else if (strcmp(optarg, "time") == 0)
opt = FS_OPTTIME;
else
errx(1,
"%s: unknown optimization preference: use `space' or `time'",
optarg);
break;
case 's':
if ((fssize = atoi(optarg)) <= 0)
errx(1, "%s: bad filesystem size", optarg);
break;
case '?':
default:
usage();
}
argc -= optind;
argv += optind;
if (argc != 1)
usage();
special = argv[0];
cp = strrchr(special, '/');
if (cp == 0) {
/*
* No path prefix; try prefixing _PATH_DEV.
*/
snprintf(device, sizeof(device), "%s%s", _PATH_DEV, special);
special = device;
}
fso = open(special, Nflag ? O_RDONLY : O_RDWR);
if (fso < 0)
err(1, "%s", special);
if (fstat(fso, &st) < 0)
err(1, "%s", special);
if ((st.st_mode & S_IFMT) != S_IFCHR)
errx(1, "%s: not a character-special device", special);
if (sectorsize == 0)
ioctl(fso, DIOCGSECTORSIZE, &sectorsize);
if (sectorsize && !ioctl(fso, DIOCGMEDIASIZE, &mediasize)) {
if (fssize == 0)
fssize = mediasize / sectorsize;
else if (fssize > mediasize / sectorsize)
errx(1, "%s: maximum filesystem size is %u",
special, (u_int)(mediasize / sectorsize));
}
pp = NULL;
lp = getdisklabel(special);
if (lp != NULL) {
cp = strchr(special, '\0');
cp--;
if ((*cp < 'a' || *cp > 'h') && !isdigit(*cp))
errx(1, "%s: can't figure out filesystem partition",
special);
if (isdigit(*cp))
pp = &lp->d_partitions[RAW_PART];
else
pp = &lp->d_partitions[*cp - 'a'];
oldpartition = *pp;
if (pp->p_size == 0)
errx(1, "%s: `%c' partition is unavailable",
special, *cp);
if (pp->p_fstype == FS_BOOT)
errx(1, "%s: `%c' partition overlaps boot program",
special, *cp);
if (fssize == 0)
fssize = pp->p_size;
if (fssize > pp->p_size)
errx(1,
"%s: maximum filesystem size %d", special, pp->p_size);
if (sectorsize == 0)
sectorsize = lp->d_secsize;
if (fsize == 0)
fsize = pp->p_fsize;
if (bsize == 0)
bsize = pp->p_frag * pp->p_fsize;
}
if (sectorsize <= 0)
errx(1, "%s: no default sector size", special);
if (fsize <= 0)
fsize = MAX(DFL_FRAGSIZE, sectorsize);
if (bsize <= 0)
bsize = MIN(DFL_BLKSIZE, 8 * fsize);
if (maxbsize == 0)
maxbsize = bsize;
/*
* Maxcontig sets the default for the maximum number of blocks
* that may be allocated sequentially. With filesystem clustering
* it is possible to allocate contiguous blocks up to the maximum
* transfer size permitted by the controller or buffering.
*/
if (maxcontig == 0)
maxcontig = MAX(1, MAXPHYS / bsize);
if (density == 0)
density = NFPI * fsize;
if (minfree < MINFREE && opt != FS_OPTSPACE) {
fprintf(stderr, "Warning: changing optimization to space ");
fprintf(stderr, "because minfree is less than %d%%\n", MINFREE);
opt = FS_OPTSPACE;
}
if (maxbpg == 0)
maxbpg = MAXBLKPG(bsize);
realsectorsize = sectorsize;
if (sectorsize != DEV_BSIZE) { /* XXX */
int secperblk = sectorsize / DEV_BSIZE;
sectorsize = DEV_BSIZE;
fssize *= secperblk;
if (pp != NULL);
pp->p_size *= secperblk;
}
mkfs(pp, special);
if (!unlabeled) {
if (realsectorsize != DEV_BSIZE)
pp->p_size /= realsectorsize / DEV_BSIZE;
if (!Nflag && bcmp(pp, &oldpartition, sizeof(oldpartition)))
rewritelabel(special, lp);
}
close(fso);
exit(0);
}
struct disklabel *
getdisklabel(char *s)
{
static struct disklabel lab;
struct disklabel *lp;
if (!ioctl(fso, DIOCGDINFO, (char *)&lab))
return (&lab);
unlabeled++;
if (disktype) {
lp = getdiskbyname(disktype);
if (lp != NULL)
return (lp);
}
return (NULL);
}
void
rewritelabel(char *s, struct disklabel *lp)
{
if (unlabeled)
return;
lp->d_checksum = 0;
lp->d_checksum = dkcksum(lp);
if (ioctl(fso, DIOCWDINFO, (char *)lp) < 0) {
warn("ioctl (WDINFO)");
errx(1, "%s: can't rewrite disk label", s);
}
}
static void
usage()
{
fprintf(stderr,
"usage: %s [ -fsoptions ] special-device%s\n",
getprogname(),
" [device-type]");
fprintf(stderr, "where fsoptions are:\n");
fprintf(stderr,
"\t-N do not create filesystem, just print out parameters\n");
fprintf(stderr, "\t-O filesystem format: 1 => UFS1, 2 => UFS2\n");
fprintf(stderr, "\t-R regression test, supress random factors\n");
fprintf(stderr, "\t-S sector size\n");
fprintf(stderr, "\t-T disktype\n");
fprintf(stderr, "\t-U enable soft updates\n");
fprintf(stderr, "\t-a maximum contiguous blocks\n");
fprintf(stderr, "\t-b block size\n");
fprintf(stderr, "\t-c blocks per cylinders group\n");
fprintf(stderr, "\t-d maximum extent size\n");
fprintf(stderr, "\t-e maximum blocks per file in a cylinder group\n");
fprintf(stderr, "\t-f frag size\n");
fprintf(stderr, "\t-g average file size\n");
fprintf(stderr, "\t-h average files per directory\n");
fprintf(stderr, "\t-i number of bytes per inode\n");
fprintf(stderr, "\t-m minimum free space %%\n");
fprintf(stderr, "\t-o optimization preference (`space' or `time')\n");
fprintf(stderr, "\t-s file systemsize (sectors)\n");
exit(1);
}