freebsd kernel with SKQ
Go to file
Adrian Chadd c6f810c6a4 Add some code to double-check whether we're correctly populating the
TX ring according to what the firmware requires.

The firmware requires A-MPDU sub-frames to be at a very specific ring
offset - that is, the ring slot offset should be (seqno % 256.)

This holds for every NIC I've tested thus far except the 4965,
which starts erroring out here shortly before the firmware panics.
Which is good, it's doing what it's supposed to (read: capture that
we've screwed up somewhere.)

The specifics about getting this stuff right:

* the initial seqno allocation should match up with the ringid.
* .. yes, this means we can start at a ring offset that isn't zero.
* .. because we program the start seqno in the firmware message
  to setup the AC.
* The initial seqno allocation may be non-zero _and_ frames may be
  being transmitted during a-mpdu negotiation.  I faced similar
  issues on ath(4) and had to software queue frames to that node+TID
  during A-MPDU negotiation.
* seqno allocation should be in lockstep with ring increments.
* If we fail to transmit some segment, no, we shouldn't reuse that
  ring slot.  We should just transmit a BAR (which we aren't yet
  doing, sigh) and move onto the next seqno.
* In theory there shouldn't be any holes in the seqno space when
  we are transmitting frames.

Tested:

* 4965 (throws problems, so yes we have to fix this);
* 5100 (seems ok);
* 6200 (seems ok);
* 2200 (seems ok);
* 2230 (seems ok).
2013-12-02 03:40:51 +00:00
bin test: Simplify the code by unifying op_num and op_type. 2013-12-01 17:00:57 +00:00
cddl MFV r258371,r258372: 4101 metaslab_debug should allow for fine-grained control 2013-11-28 19:37:22 +00:00
contrib libiberty: upstream updates. 2013-12-01 22:08:19 +00:00
crypto MFV r257952: 2013-11-11 09:19:58 +00:00
etc Create /var/cache with mode 0755 instead of 0750. 2013-11-26 20:03:25 +00:00
games Refresh the tips for the new pkg system. 2013-10-03 11:51:15 +00:00
gnu gcc: Missing makefile changes for r258501. 2013-11-24 04:08:47 +00:00
include Replace Sun Industry Standards Source License for Sun RPC code with a 2013-11-25 19:08:38 +00:00
kerberos5 Clean up the Kerberos build by turning libheimipcc and libheimipcs into 2013-09-10 18:40:43 +00:00
lib chmod(2): Document S_ISVTX following SUSv3/SUSv4. 2013-12-01 12:24:57 +00:00
libexec Build and install the atf tests. 2013-11-08 14:33:41 +00:00
release Use standard CLEANFILES/CLEANDIRS and clean target in bsd.obj.mk. 2013-12-01 15:24:35 +00:00
rescue - Trim an unused and bogus Makefile for mount_smbfs. 2013-06-28 21:00:08 +00:00
sbin Remove trailing backslash. 2013-12-01 09:52:38 +00:00
secure Unbreak the WITHOUT_KERBEROS build and try to reduce the odds of a 2013-09-23 20:35:54 +00:00
share Move my simple logging API to a separate library. It is now already used 2013-12-01 09:41:06 +00:00
sys Add some code to double-check whether we're correctly populating the 2013-12-02 03:40:51 +00:00
tests Install category Kyuafiles from their category directories. 2013-11-08 14:29:06 +00:00
tools Add package additions support for pkgng by adding a new function cust_pkgng(): 2013-11-28 11:06:18 +00:00
usr.bin Import svn-1.8.5. This contains a user-visible fix for svn:externals 2013-11-25 17:52:16 +00:00
usr.sbin Sort function output on name of the function. 2013-11-30 23:47:18 +00:00
COPYRIGHT Happy New Year 2013! 2012-12-31 11:22:55 +00:00
LOCKS Explicitly require Security Officer's approval for kernel PRNG bits. 2013-09-17 14:19:05 +00:00
MAINTAINERS pkg_install has been removed on 20131031. 2013-11-09 16:20:42 +00:00
Makefile Remove the armv6eb architecture as it is unused, and almost certainly 2013-09-22 07:30:17 +00:00
Makefile.inc1 Move my simple logging API to a separate library. It is now already used 2013-12-01 09:41:06 +00:00
ObsoleteFiles.inc One more BIND remnant: /etc/mtree/BIND.chroot.dist 2013-11-19 13:32:24 +00:00
README Vendor import of OpenSSH 6.4p1. 2013-11-11 09:13:37 +00:00
UPDATING Also mention that drill(1) can be used, now that nslookup and dig are no 2013-11-29 08:22:48 +00:00

This is the top level of the FreeBSD source directory.  This file
was last revised on:
$FreeBSD$

For copyright information, please see the file COPYRIGHT in this
directory (additional copyright information also exists for some
sources in this tree - please see the specific source directories for
more information).

The Makefile in this directory supports a number of targets for
building components (or all) of the FreeBSD source tree, the most
commonly used one being ``world'', which rebuilds and installs
everything in the FreeBSD system from the source tree except the
kernel, the kernel-modules and the contents of /etc.  The ``world''
target should only be used in cases where the source tree has not
changed from the currently running version.  See:
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/makeworld.html
for more information, including setting make(1) variables.

The ``buildkernel'' and ``installkernel'' targets build and install
the kernel and the modules (see below).  Please see the top of
the Makefile in this directory for more information on the
standard build targets and compile-time flags.

Building a kernel is a somewhat more involved process, documentation
for which can be found at:
   http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/kernelconfig.html
And in the config(8) man page.
Note: If you want to build and install the kernel with the
``buildkernel'' and ``installkernel'' targets, you might need to build
world before.  More information is available in the handbook.

The sample kernel configuration files reside in the sys/<arch>/conf
sub-directory (assuming that you've installed the kernel sources), the
file named GENERIC being the one used to build your initial installation
kernel.  The file NOTES contains entries and documentation for all possible
devices, not just those commonly used.  It is the successor of the ancient
LINT file, but in contrast to LINT, it is not buildable as a kernel but a
pure reference and documentation file.


Source Roadmap:
---------------
bin		System/user commands.

cddl		Various commands and libraries under the Common Development
		and Distribution License.

contrib		Packages contributed by 3rd parties.

crypto		Cryptography stuff (see crypto/README).

etc		Template files for /etc.

games		Amusements.

gnu		Various commands and libraries under the GNU Public License.
		Please see gnu/COPYING* for more information.

include		System include files.

kerberos5	Kerberos5 (Heimdal) package.

lib		System libraries.

libexec		System daemons.

release		Release building Makefile & associated tools.

rescue		Build system for statically linked /rescue utilities.

sbin		System commands.

secure		Cryptographic libraries and commands.

share		Shared resources.

sys		Kernel sources.

tools		Utilities for regression testing and miscellaneous tasks.

usr.bin		User commands.

usr.sbin	System administration commands.


For information on synchronizing your source tree with one or more of
the FreeBSD Project's development branches, please see:

  http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/synching.html