freebsd-skq/tools/regression/ipsec/ipsec.t
George V. Neville-Neil 43888ab17c Adding tests for Camellia which will be added to the tree soon.
Added tests for aes-ctr which were not present before.
2007-03-26 07:40:51 +00:00

105 lines
3.4 KiB
Bash

#!/bin/sh
# $FreeBSD$
#
# IPsec regression test.
#
# This test sets up tunnels on the localhost (lo0) interface
# with various ciphers by using the setkey(8) command and then
# attempts to ping each end of the tunnel.
# The test says which pings worked and which failed.
#
# Expected Output: No failures
ipbase="127.255"
netif="lo0"
spi="10000"
echo "1..414"
#sysctl net.inet.ipsec.crypto_support=1 >/dev/null 2>&1
ifconfig $netif alias ${ipbase}.0.1/24
ifconfig $netif alias ${ipbase}.1.1/24
i=1
for ecipher in \
des-cbc:12345678 \
3des-cbc:012345678901234567890123 \
blowfish-cbc:0123456789012345 \
blowfish-cbc:01234567890123456789 \
blowfish-cbc:012345678901234567890123 \
blowfish-cbc:0123456789012345678901234567 \
blowfish-cbc:01234567890123456789012345678901 \
blowfish-cbc:012345678901234567890123456789012345 \
blowfish-cbc:0123456789012345678901234567890123456789 \
blowfish-cbc:01234567890123456789012345678901234567890123 \
blowfish-cbc:012345678901234567890123456789012345678901234567 \
blowfish-cbc:0123456789012345678901234567890123456789012345678901 \
blowfish-cbc:01234567890123456789012345678901234567890123456789012345 \
cast128-cbc:0123456789012345 \
aes-ctr:01234567890123456789\
aes-ctr:0123456789012345678901234567\
aes-ctr:012345678901234567890123456789012345\
camellia-cbc:0123456789012345\
camellia-cbc:012345678901234567890123\
camellia-cbc:01234567890123456789012345678901\
rijndael-cbc:0123456789012345 \
rijndael-cbc:012345678901234567890123 \
rijndael-cbc:01234567890123456789012345678901; do
ealgo=${ecipher%%:*}
ekey=${ecipher##*:}
for acipher in \
hmac-md5:0123456789012345 \
hmac-sha1:01234567890123456789 \
hmac-ripemd160:01234567890123456789 \
hmac-sha2-256:01234567890123456789012345678901 \
hmac-sha2-384:012345678901234567890123456789012345678901234567 \
hmac-sha2-512:0123456789012345678901234567890123456789012345678901234567890123; do
aalgo=${acipher%%:*}
akey=${acipher##*:}
setkey -F
setkey -FP
(echo "add ${ipbase}.0.1 ${ipbase}.1.1 esp $spi -m transport -E $ealgo \"${ekey}\" -A $aalgo \"${akey}\" ;"
echo "add ${ipbase}.1.1 ${ipbase}.0.1 esp `expr $spi + 1` -m transport -E $ealgo \"${ekey}\" -A $aalgo \"${akey}\" ;"
echo "spdadd ${ipbase}.0.1 ${ipbase}.1.1 any -P out ipsec esp/transport//require;"
echo "spdadd ${ipbase}.1.1 ${ipbase}.0.1 any -P in ipsec esp/transport//require;"
echo "spdadd ${ipbase}.0.1 ${ipbase}.1.1 any -P in ipsec esp/transport//require;"
echo "spdadd ${ipbase}.1.1 ${ipbase}.0.1 any -P out ipsec esp/transport//require;"
) | setkey -c >/dev/null 2>&1
if [ $? -eq 0 ]; then
echo "ok $i - setkey ${ealgo} ${ekey} ${aalgo} ${akey}"
else
echo "not ok $i - setkey ${ealgo} ${ekey} ${aalgo} ${akey}"
fi
i=$((i+1))
ping -c 1 -t 2 -S ${ipbase}.0.1 ${ipbase}.1.1 >/dev/null
if [ $? -eq 0 ]; then
echo "ok $i - test 1 ${ealgo} ${ekey} ${aalgo} ${akey}"
else
echo "not ok $i - test 1 ${ealgo} ${ekey} ${aalgo} ${akey}"
fi
i=$((i+1))
ping -c 1 -t 2 -S ${ipbase}.1.1 ${ipbase}.0.1 >/dev/null
if [ $? -eq 0 ]; then
echo "ok $i - test 2 ${ealgo} ${ekey} ${aalgo} ${akey}"
else
echo "not ok $i - test 2 ${ealgo} ${ekey} ${aalgo} ${akey}"
fi
i=$((i+1))
done
done
setkey -F
setkey -FP
ifconfig $netif -alias ${ipbase}.0.1
ifconfig $netif -alias ${ipbase}.1.1