8478efdf71
The interpretation of the Electromechanical Interlock Status was inverted, so we disengaged the EI if a card was inserted. Fix it to engage the EI if a card is inserted. When displaying the slot capabilites/status with pciconf: - We inverted the sense of the Power Controller Control bit, saying the power was off when it was really on (according to this bit). Fix that. - Display the status of the Electromechanical Interlock: EI(engaged) EI(disengaged) Reviewed by: jhb MFC after: 3 days Sponsored by: Dell Inc. Differential Revision: https://reviews.freebsd.org/D7426
1077 lines
27 KiB
C
1077 lines
27 KiB
C
/*-
|
|
* Copyright (c) 2007 Yahoo!, Inc.
|
|
* All rights reserved.
|
|
* Written by: John Baldwin <jhb@FreeBSD.org>
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. Neither the name of the author nor the names of any co-contributors
|
|
* may be used to endorse or promote products derived from this software
|
|
* without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
|
|
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
|
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
|
|
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
|
|
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
|
|
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*/
|
|
|
|
#ifndef lint
|
|
static const char rcsid[] =
|
|
"$FreeBSD$";
|
|
#endif /* not lint */
|
|
|
|
#include <sys/types.h>
|
|
|
|
#include <err.h>
|
|
#include <stdio.h>
|
|
#include <strings.h>
|
|
#include <sys/agpio.h>
|
|
#include <sys/pciio.h>
|
|
|
|
#include <dev/agp/agpreg.h>
|
|
#include <dev/pci/pcireg.h>
|
|
|
|
#include "pciconf.h"
|
|
|
|
static void list_ecaps(int fd, struct pci_conf *p);
|
|
|
|
static void
|
|
cap_power(int fd, struct pci_conf *p, uint8_t ptr)
|
|
{
|
|
uint16_t cap, status;
|
|
|
|
cap = read_config(fd, &p->pc_sel, ptr + PCIR_POWER_CAP, 2);
|
|
status = read_config(fd, &p->pc_sel, ptr + PCIR_POWER_STATUS, 2);
|
|
printf("powerspec %d supports D0%s%s D3 current D%d",
|
|
cap & PCIM_PCAP_SPEC,
|
|
cap & PCIM_PCAP_D1SUPP ? " D1" : "",
|
|
cap & PCIM_PCAP_D2SUPP ? " D2" : "",
|
|
status & PCIM_PSTAT_DMASK);
|
|
}
|
|
|
|
static void
|
|
cap_agp(int fd, struct pci_conf *p, uint8_t ptr)
|
|
{
|
|
uint32_t status, command;
|
|
|
|
status = read_config(fd, &p->pc_sel, ptr + AGP_STATUS, 4);
|
|
command = read_config(fd, &p->pc_sel, ptr + AGP_CAPID, 4);
|
|
printf("AGP ");
|
|
if (AGP_MODE_GET_MODE_3(status)) {
|
|
printf("v3 ");
|
|
if (AGP_MODE_GET_RATE(status) & AGP_MODE_V3_RATE_8x)
|
|
printf("8x ");
|
|
if (AGP_MODE_GET_RATE(status) & AGP_MODE_V3_RATE_4x)
|
|
printf("4x ");
|
|
} else {
|
|
if (AGP_MODE_GET_RATE(status) & AGP_MODE_V2_RATE_4x)
|
|
printf("4x ");
|
|
if (AGP_MODE_GET_RATE(status) & AGP_MODE_V2_RATE_2x)
|
|
printf("2x ");
|
|
if (AGP_MODE_GET_RATE(status) & AGP_MODE_V2_RATE_1x)
|
|
printf("1x ");
|
|
}
|
|
if (AGP_MODE_GET_SBA(status))
|
|
printf("SBA ");
|
|
if (AGP_MODE_GET_AGP(command)) {
|
|
printf("enabled at ");
|
|
if (AGP_MODE_GET_MODE_3(command)) {
|
|
printf("v3 ");
|
|
switch (AGP_MODE_GET_RATE(command)) {
|
|
case AGP_MODE_V3_RATE_8x:
|
|
printf("8x ");
|
|
break;
|
|
case AGP_MODE_V3_RATE_4x:
|
|
printf("4x ");
|
|
break;
|
|
}
|
|
} else
|
|
switch (AGP_MODE_GET_RATE(command)) {
|
|
case AGP_MODE_V2_RATE_4x:
|
|
printf("4x ");
|
|
break;
|
|
case AGP_MODE_V2_RATE_2x:
|
|
printf("2x ");
|
|
break;
|
|
case AGP_MODE_V2_RATE_1x:
|
|
printf("1x ");
|
|
break;
|
|
}
|
|
if (AGP_MODE_GET_SBA(command))
|
|
printf("SBA ");
|
|
} else
|
|
printf("disabled");
|
|
}
|
|
|
|
static void
|
|
cap_vpd(int fd __unused, struct pci_conf *p __unused, uint8_t ptr __unused)
|
|
{
|
|
|
|
printf("VPD");
|
|
}
|
|
|
|
static void
|
|
cap_msi(int fd, struct pci_conf *p, uint8_t ptr)
|
|
{
|
|
uint16_t ctrl;
|
|
int msgnum;
|
|
|
|
ctrl = read_config(fd, &p->pc_sel, ptr + PCIR_MSI_CTRL, 2);
|
|
msgnum = 1 << ((ctrl & PCIM_MSICTRL_MMC_MASK) >> 1);
|
|
printf("MSI supports %d message%s%s%s ", msgnum,
|
|
(msgnum == 1) ? "" : "s",
|
|
(ctrl & PCIM_MSICTRL_64BIT) ? ", 64 bit" : "",
|
|
(ctrl & PCIM_MSICTRL_VECTOR) ? ", vector masks" : "");
|
|
if (ctrl & PCIM_MSICTRL_MSI_ENABLE) {
|
|
msgnum = 1 << ((ctrl & PCIM_MSICTRL_MME_MASK) >> 4);
|
|
printf("enabled with %d message%s", msgnum,
|
|
(msgnum == 1) ? "" : "s");
|
|
}
|
|
}
|
|
|
|
static void
|
|
cap_pcix(int fd, struct pci_conf *p, uint8_t ptr)
|
|
{
|
|
uint32_t status;
|
|
int comma, max_splits, max_burst_read;
|
|
|
|
status = read_config(fd, &p->pc_sel, ptr + PCIXR_STATUS, 4);
|
|
printf("PCI-X ");
|
|
if (status & PCIXM_STATUS_64BIT)
|
|
printf("64-bit ");
|
|
if ((p->pc_hdr & PCIM_HDRTYPE) == 1)
|
|
printf("bridge ");
|
|
if ((p->pc_hdr & PCIM_HDRTYPE) != 1 || (status & (PCIXM_STATUS_133CAP |
|
|
PCIXM_STATUS_266CAP | PCIXM_STATUS_533CAP)) != 0)
|
|
printf("supports");
|
|
comma = 0;
|
|
if (status & PCIXM_STATUS_133CAP) {
|
|
printf("%s 133MHz", comma ? "," : "");
|
|
comma = 1;
|
|
}
|
|
if (status & PCIXM_STATUS_266CAP) {
|
|
printf("%s 266MHz", comma ? "," : "");
|
|
comma = 1;
|
|
}
|
|
if (status & PCIXM_STATUS_533CAP) {
|
|
printf("%s 533MHz", comma ? "," : "");
|
|
comma = 1;
|
|
}
|
|
if ((p->pc_hdr & PCIM_HDRTYPE) == 1)
|
|
return;
|
|
max_burst_read = 0;
|
|
switch (status & PCIXM_STATUS_MAX_READ) {
|
|
case PCIXM_STATUS_MAX_READ_512:
|
|
max_burst_read = 512;
|
|
break;
|
|
case PCIXM_STATUS_MAX_READ_1024:
|
|
max_burst_read = 1024;
|
|
break;
|
|
case PCIXM_STATUS_MAX_READ_2048:
|
|
max_burst_read = 2048;
|
|
break;
|
|
case PCIXM_STATUS_MAX_READ_4096:
|
|
max_burst_read = 4096;
|
|
break;
|
|
}
|
|
max_splits = 0;
|
|
switch (status & PCIXM_STATUS_MAX_SPLITS) {
|
|
case PCIXM_STATUS_MAX_SPLITS_1:
|
|
max_splits = 1;
|
|
break;
|
|
case PCIXM_STATUS_MAX_SPLITS_2:
|
|
max_splits = 2;
|
|
break;
|
|
case PCIXM_STATUS_MAX_SPLITS_3:
|
|
max_splits = 3;
|
|
break;
|
|
case PCIXM_STATUS_MAX_SPLITS_4:
|
|
max_splits = 4;
|
|
break;
|
|
case PCIXM_STATUS_MAX_SPLITS_8:
|
|
max_splits = 8;
|
|
break;
|
|
case PCIXM_STATUS_MAX_SPLITS_12:
|
|
max_splits = 12;
|
|
break;
|
|
case PCIXM_STATUS_MAX_SPLITS_16:
|
|
max_splits = 16;
|
|
break;
|
|
case PCIXM_STATUS_MAX_SPLITS_32:
|
|
max_splits = 32;
|
|
break;
|
|
}
|
|
printf("%s %d burst read, %d split transaction%s", comma ? "," : "",
|
|
max_burst_read, max_splits, max_splits == 1 ? "" : "s");
|
|
}
|
|
|
|
static void
|
|
cap_ht(int fd, struct pci_conf *p, uint8_t ptr)
|
|
{
|
|
uint32_t reg;
|
|
uint16_t command;
|
|
|
|
command = read_config(fd, &p->pc_sel, ptr + PCIR_HT_COMMAND, 2);
|
|
printf("HT ");
|
|
if ((command & 0xe000) == PCIM_HTCAP_SLAVE)
|
|
printf("slave");
|
|
else if ((command & 0xe000) == PCIM_HTCAP_HOST)
|
|
printf("host");
|
|
else
|
|
switch (command & PCIM_HTCMD_CAP_MASK) {
|
|
case PCIM_HTCAP_SWITCH:
|
|
printf("switch");
|
|
break;
|
|
case PCIM_HTCAP_INTERRUPT:
|
|
printf("interrupt");
|
|
break;
|
|
case PCIM_HTCAP_REVISION_ID:
|
|
printf("revision ID");
|
|
break;
|
|
case PCIM_HTCAP_UNITID_CLUMPING:
|
|
printf("unit ID clumping");
|
|
break;
|
|
case PCIM_HTCAP_EXT_CONFIG_SPACE:
|
|
printf("extended config space");
|
|
break;
|
|
case PCIM_HTCAP_ADDRESS_MAPPING:
|
|
printf("address mapping");
|
|
break;
|
|
case PCIM_HTCAP_MSI_MAPPING:
|
|
printf("MSI %saddress window %s at 0x",
|
|
command & PCIM_HTCMD_MSI_FIXED ? "fixed " : "",
|
|
command & PCIM_HTCMD_MSI_ENABLE ? "enabled" :
|
|
"disabled");
|
|
if (command & PCIM_HTCMD_MSI_FIXED)
|
|
printf("fee00000");
|
|
else {
|
|
reg = read_config(fd, &p->pc_sel,
|
|
ptr + PCIR_HTMSI_ADDRESS_HI, 4);
|
|
if (reg != 0)
|
|
printf("%08x", reg);
|
|
reg = read_config(fd, &p->pc_sel,
|
|
ptr + PCIR_HTMSI_ADDRESS_LO, 4);
|
|
printf("%08x", reg);
|
|
}
|
|
break;
|
|
case PCIM_HTCAP_DIRECT_ROUTE:
|
|
printf("direct route");
|
|
break;
|
|
case PCIM_HTCAP_VCSET:
|
|
printf("VC set");
|
|
break;
|
|
case PCIM_HTCAP_RETRY_MODE:
|
|
printf("retry mode");
|
|
break;
|
|
case PCIM_HTCAP_X86_ENCODING:
|
|
printf("X86 encoding");
|
|
break;
|
|
case PCIM_HTCAP_GEN3:
|
|
printf("Gen3");
|
|
break;
|
|
case PCIM_HTCAP_FLE:
|
|
printf("function-level extension");
|
|
break;
|
|
case PCIM_HTCAP_PM:
|
|
printf("power management");
|
|
break;
|
|
case PCIM_HTCAP_HIGH_NODE_COUNT:
|
|
printf("high node count");
|
|
break;
|
|
default:
|
|
printf("unknown %02x", command);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
cap_vendor(int fd, struct pci_conf *p, uint8_t ptr)
|
|
{
|
|
uint8_t length;
|
|
|
|
length = read_config(fd, &p->pc_sel, ptr + PCIR_VENDOR_LENGTH, 1);
|
|
printf("vendor (length %d)", length);
|
|
if (p->pc_vendor == 0x8086) {
|
|
/* Intel */
|
|
uint8_t version;
|
|
|
|
version = read_config(fd, &p->pc_sel, ptr + PCIR_VENDOR_DATA,
|
|
1);
|
|
printf(" Intel cap %d version %d", version >> 4, version & 0xf);
|
|
if (version >> 4 == 1 && length == 12) {
|
|
/* Feature Detection */
|
|
uint32_t fvec;
|
|
int comma;
|
|
|
|
comma = 0;
|
|
fvec = read_config(fd, &p->pc_sel, ptr +
|
|
PCIR_VENDOR_DATA + 5, 4);
|
|
printf("\n\t\t features:");
|
|
if (fvec & (1 << 0)) {
|
|
printf(" AMT");
|
|
comma = 1;
|
|
}
|
|
fvec = read_config(fd, &p->pc_sel, ptr +
|
|
PCIR_VENDOR_DATA + 1, 4);
|
|
if (fvec & (1 << 21)) {
|
|
printf("%s Quick Resume", comma ? "," : "");
|
|
comma = 1;
|
|
}
|
|
if (fvec & (1 << 18)) {
|
|
printf("%s SATA RAID-5", comma ? "," : "");
|
|
comma = 1;
|
|
}
|
|
if (fvec & (1 << 9)) {
|
|
printf("%s Mobile", comma ? "," : "");
|
|
comma = 1;
|
|
}
|
|
if (fvec & (1 << 7)) {
|
|
printf("%s 6 PCI-e x1 slots", comma ? "," : "");
|
|
comma = 1;
|
|
} else {
|
|
printf("%s 4 PCI-e x1 slots", comma ? "," : "");
|
|
comma = 1;
|
|
}
|
|
if (fvec & (1 << 5)) {
|
|
printf("%s SATA RAID-0/1/10", comma ? "," : "");
|
|
comma = 1;
|
|
}
|
|
if (fvec & (1 << 3)) {
|
|
printf("%s SATA AHCI", comma ? "," : "");
|
|
comma = 1;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static void
|
|
cap_debug(int fd, struct pci_conf *p, uint8_t ptr)
|
|
{
|
|
uint16_t debug_port;
|
|
|
|
debug_port = read_config(fd, &p->pc_sel, ptr + PCIR_DEBUG_PORT, 2);
|
|
printf("EHCI Debug Port at offset 0x%x in map 0x%x", debug_port &
|
|
PCIM_DEBUG_PORT_OFFSET, PCIR_BAR(debug_port >> 13));
|
|
}
|
|
|
|
static void
|
|
cap_subvendor(int fd, struct pci_conf *p, uint8_t ptr)
|
|
{
|
|
uint32_t id;
|
|
|
|
id = read_config(fd, &p->pc_sel, ptr + PCIR_SUBVENDCAP_ID, 4);
|
|
printf("PCI Bridge card=0x%08x", id);
|
|
}
|
|
|
|
#define MAX_PAYLOAD(field) (128 << (field))
|
|
|
|
static const char *
|
|
link_speed_string(uint8_t speed)
|
|
{
|
|
|
|
switch (speed) {
|
|
case 1:
|
|
return ("2.5");
|
|
case 2:
|
|
return ("5.0");
|
|
case 3:
|
|
return ("8.0");
|
|
default:
|
|
return ("undef");
|
|
}
|
|
}
|
|
|
|
static const char *
|
|
aspm_string(uint8_t aspm)
|
|
{
|
|
|
|
switch (aspm) {
|
|
case 1:
|
|
return ("L0s");
|
|
case 2:
|
|
return ("L1");
|
|
case 3:
|
|
return ("L0s/L1");
|
|
default:
|
|
return ("disabled");
|
|
}
|
|
}
|
|
|
|
static int
|
|
slot_power(uint32_t cap)
|
|
{
|
|
int mwatts;
|
|
|
|
mwatts = (cap & PCIEM_SLOT_CAP_SPLV) >> 7;
|
|
switch (cap & PCIEM_SLOT_CAP_SPLS) {
|
|
case 0x0:
|
|
mwatts *= 1000;
|
|
break;
|
|
case 0x1:
|
|
mwatts *= 100;
|
|
break;
|
|
case 0x2:
|
|
mwatts *= 10;
|
|
break;
|
|
default:
|
|
break;
|
|
}
|
|
return (mwatts);
|
|
}
|
|
|
|
static void
|
|
cap_express(int fd, struct pci_conf *p, uint8_t ptr)
|
|
{
|
|
uint32_t cap;
|
|
uint16_t ctl, flags, sta;
|
|
unsigned int version;
|
|
|
|
flags = read_config(fd, &p->pc_sel, ptr + PCIER_FLAGS, 2);
|
|
version = flags & PCIEM_FLAGS_VERSION;
|
|
printf("PCI-Express %u ", version);
|
|
switch (flags & PCIEM_FLAGS_TYPE) {
|
|
case PCIEM_TYPE_ENDPOINT:
|
|
printf("endpoint");
|
|
break;
|
|
case PCIEM_TYPE_LEGACY_ENDPOINT:
|
|
printf("legacy endpoint");
|
|
break;
|
|
case PCIEM_TYPE_ROOT_PORT:
|
|
printf("root port");
|
|
break;
|
|
case PCIEM_TYPE_UPSTREAM_PORT:
|
|
printf("upstream port");
|
|
break;
|
|
case PCIEM_TYPE_DOWNSTREAM_PORT:
|
|
printf("downstream port");
|
|
break;
|
|
case PCIEM_TYPE_PCI_BRIDGE:
|
|
printf("PCI bridge");
|
|
break;
|
|
case PCIEM_TYPE_PCIE_BRIDGE:
|
|
printf("PCI to PCIe bridge");
|
|
break;
|
|
case PCIEM_TYPE_ROOT_INT_EP:
|
|
printf("root endpoint");
|
|
break;
|
|
case PCIEM_TYPE_ROOT_EC:
|
|
printf("event collector");
|
|
break;
|
|
default:
|
|
printf("type %d", (flags & PCIEM_FLAGS_TYPE) >> 4);
|
|
break;
|
|
}
|
|
if (flags & PCIEM_FLAGS_IRQ)
|
|
printf(" MSI %d", (flags & PCIEM_FLAGS_IRQ) >> 9);
|
|
cap = read_config(fd, &p->pc_sel, ptr + PCIER_DEVICE_CAP, 4);
|
|
ctl = read_config(fd, &p->pc_sel, ptr + PCIER_DEVICE_CTL, 2);
|
|
printf(" max data %d(%d)",
|
|
MAX_PAYLOAD((ctl & PCIEM_CTL_MAX_PAYLOAD) >> 5),
|
|
MAX_PAYLOAD(cap & PCIEM_CAP_MAX_PAYLOAD));
|
|
if ((cap & PCIEM_CAP_FLR) != 0)
|
|
printf(" FLR");
|
|
if (ctl & PCIEM_CTL_RELAXED_ORD_ENABLE)
|
|
printf(" RO");
|
|
if (ctl & PCIEM_CTL_NOSNOOP_ENABLE)
|
|
printf(" NS");
|
|
if (version >= 2) {
|
|
cap = read_config(fd, &p->pc_sel, ptr + PCIER_DEVICE_CAP2, 4);
|
|
if ((cap & PCIEM_CAP2_ARI) != 0) {
|
|
ctl = read_config(fd, &p->pc_sel,
|
|
ptr + PCIER_DEVICE_CTL2, 4);
|
|
printf(" ARI %s",
|
|
(ctl & PCIEM_CTL2_ARI) ? "enabled" : "disabled");
|
|
}
|
|
}
|
|
cap = read_config(fd, &p->pc_sel, ptr + PCIER_LINK_CAP, 4);
|
|
sta = read_config(fd, &p->pc_sel, ptr + PCIER_LINK_STA, 2);
|
|
if (cap == 0 && sta == 0)
|
|
return;
|
|
printf("\n ");
|
|
printf(" link x%d(x%d)", (sta & PCIEM_LINK_STA_WIDTH) >> 4,
|
|
(cap & PCIEM_LINK_CAP_MAX_WIDTH) >> 4);
|
|
if ((cap & PCIEM_LINK_CAP_MAX_WIDTH) != 0) {
|
|
printf(" speed %s(%s)", (sta & PCIEM_LINK_STA_WIDTH) == 0 ?
|
|
"0.0" : link_speed_string(sta & PCIEM_LINK_STA_SPEED),
|
|
link_speed_string(cap & PCIEM_LINK_CAP_MAX_SPEED));
|
|
}
|
|
if ((cap & PCIEM_LINK_CAP_ASPM) != 0) {
|
|
ctl = read_config(fd, &p->pc_sel, ptr + PCIER_LINK_CTL, 2);
|
|
printf(" ASPM %s(%s)", aspm_string(ctl & PCIEM_LINK_CTL_ASPMC),
|
|
aspm_string((cap & PCIEM_LINK_CAP_ASPM) >> 10));
|
|
}
|
|
if (!(flags & PCIEM_FLAGS_SLOT))
|
|
return;
|
|
cap = read_config(fd, &p->pc_sel, ptr + PCIER_SLOT_CAP, 4);
|
|
sta = read_config(fd, &p->pc_sel, ptr + PCIER_SLOT_STA, 2);
|
|
ctl = read_config(fd, &p->pc_sel, ptr + PCIER_SLOT_CTL, 2);
|
|
printf("\n ");
|
|
printf(" slot %d", (cap & PCIEM_SLOT_CAP_PSN) >> 19);
|
|
printf(" power limit %d mW", slot_power(cap));
|
|
if (cap & PCIEM_SLOT_CAP_HPC)
|
|
printf(" HotPlug(%s)", sta & PCIEM_SLOT_STA_PDS ? "present" :
|
|
"empty");
|
|
if (cap & PCIEM_SLOT_CAP_HPS)
|
|
printf(" surprise");
|
|
if (cap & PCIEM_SLOT_CAP_APB)
|
|
printf(" Attn Button");
|
|
if (cap & PCIEM_SLOT_CAP_PCP)
|
|
printf(" PC(%s)", ctl & PCIEM_SLOT_CTL_PCC ? "off" : "on");
|
|
if (cap & PCIEM_SLOT_CAP_MRLSP)
|
|
printf(" MRL(%s)", sta & PCIEM_SLOT_STA_MRLSS ? "open" :
|
|
"closed");
|
|
if (cap & PCIEM_SLOT_CAP_EIP)
|
|
printf(" EI(%s)", sta & PCIEM_SLOT_STA_EIS ? "engaged" :
|
|
"disengaged");
|
|
}
|
|
|
|
static void
|
|
cap_msix(int fd, struct pci_conf *p, uint8_t ptr)
|
|
{
|
|
uint32_t pba_offset, table_offset, val;
|
|
int msgnum, pba_bar, table_bar;
|
|
uint16_t ctrl;
|
|
|
|
ctrl = read_config(fd, &p->pc_sel, ptr + PCIR_MSIX_CTRL, 2);
|
|
msgnum = (ctrl & PCIM_MSIXCTRL_TABLE_SIZE) + 1;
|
|
|
|
val = read_config(fd, &p->pc_sel, ptr + PCIR_MSIX_TABLE, 4);
|
|
table_bar = PCIR_BAR(val & PCIM_MSIX_BIR_MASK);
|
|
table_offset = val & ~PCIM_MSIX_BIR_MASK;
|
|
|
|
val = read_config(fd, &p->pc_sel, ptr + PCIR_MSIX_PBA, 4);
|
|
pba_bar = PCIR_BAR(val & PCIM_MSIX_BIR_MASK);
|
|
pba_offset = val & ~PCIM_MSIX_BIR_MASK;
|
|
|
|
printf("MSI-X supports %d message%s%s\n", msgnum,
|
|
(msgnum == 1) ? "" : "s",
|
|
(ctrl & PCIM_MSIXCTRL_MSIX_ENABLE) ? ", enabled" : "");
|
|
|
|
printf(" ");
|
|
printf("Table in map 0x%x[0x%x], PBA in map 0x%x[0x%x]",
|
|
table_bar, table_offset, pba_bar, pba_offset);
|
|
}
|
|
|
|
static void
|
|
cap_sata(int fd __unused, struct pci_conf *p __unused, uint8_t ptr __unused)
|
|
{
|
|
|
|
printf("SATA Index-Data Pair");
|
|
}
|
|
|
|
static void
|
|
cap_pciaf(int fd, struct pci_conf *p, uint8_t ptr)
|
|
{
|
|
uint8_t cap;
|
|
|
|
cap = read_config(fd, &p->pc_sel, ptr + PCIR_PCIAF_CAP, 1);
|
|
printf("PCI Advanced Features:%s%s",
|
|
cap & PCIM_PCIAFCAP_FLR ? " FLR" : "",
|
|
cap & PCIM_PCIAFCAP_TP ? " TP" : "");
|
|
}
|
|
|
|
static const char *
|
|
ea_bei_to_name(int bei)
|
|
{
|
|
static const char *barstr[] = {
|
|
"BAR0", "BAR1", "BAR2", "BAR3", "BAR4", "BAR5"
|
|
};
|
|
static const char *vfbarstr[] = {
|
|
"VFBAR0", "VFBAR1", "VFBAR2", "VFBAR3", "VFBAR4", "VFBAR5"
|
|
};
|
|
|
|
if ((bei >= PCIM_EA_BEI_BAR_0) && (bei <= PCIM_EA_BEI_BAR_5))
|
|
return (barstr[bei - PCIM_EA_BEI_BAR_0]);
|
|
if ((bei >= PCIM_EA_BEI_VF_BAR_0) && (bei <= PCIM_EA_BEI_VF_BAR_5))
|
|
return (vfbarstr[bei - PCIM_EA_BEI_VF_BAR_0]);
|
|
|
|
switch (bei) {
|
|
case PCIM_EA_BEI_BRIDGE:
|
|
return "BRIDGE";
|
|
case PCIM_EA_BEI_ENI:
|
|
return "ENI";
|
|
case PCIM_EA_BEI_ROM:
|
|
return "ROM";
|
|
case PCIM_EA_BEI_RESERVED:
|
|
default:
|
|
return "RSVD";
|
|
}
|
|
}
|
|
|
|
static const char *
|
|
ea_prop_to_name(uint8_t prop)
|
|
{
|
|
|
|
switch (prop) {
|
|
case PCIM_EA_P_MEM:
|
|
return "Non-Prefetchable Memory";
|
|
case PCIM_EA_P_MEM_PREFETCH:
|
|
return "Prefetchable Memory";
|
|
case PCIM_EA_P_IO:
|
|
return "I/O Space";
|
|
case PCIM_EA_P_VF_MEM_PREFETCH:
|
|
return "VF Prefetchable Memory";
|
|
case PCIM_EA_P_VF_MEM:
|
|
return "VF Non-Prefetchable Memory";
|
|
case PCIM_EA_P_BRIDGE_MEM:
|
|
return "Bridge Non-Prefetchable Memory";
|
|
case PCIM_EA_P_BRIDGE_MEM_PREFETCH:
|
|
return "Bridge Prefetchable Memory";
|
|
case PCIM_EA_P_BRIDGE_IO:
|
|
return "Bridge I/O Space";
|
|
case PCIM_EA_P_MEM_RESERVED:
|
|
return "Reserved Memory";
|
|
case PCIM_EA_P_IO_RESERVED:
|
|
return "Reserved I/O Space";
|
|
case PCIM_EA_P_UNAVAILABLE:
|
|
return "Unavailable";
|
|
default:
|
|
return "Reserved";
|
|
}
|
|
}
|
|
|
|
static void
|
|
cap_ea(int fd, struct pci_conf *p, uint8_t ptr)
|
|
{
|
|
int num_ent;
|
|
int a, b;
|
|
uint32_t bei;
|
|
uint32_t val;
|
|
int ent_size;
|
|
uint32_t dw[4];
|
|
uint32_t flags, flags_pp, flags_sp;
|
|
uint64_t base, max_offset;
|
|
uint8_t fixed_sub_bus_nr, fixed_sec_bus_nr;
|
|
|
|
/* Determine the number of entries */
|
|
num_ent = read_config(fd, &p->pc_sel, ptr + PCIR_EA_NUM_ENT, 2);
|
|
num_ent &= PCIM_EA_NUM_ENT_MASK;
|
|
|
|
printf("PCI Enhanced Allocation (%d entries)", num_ent);
|
|
|
|
/* Find the first entry to care of */
|
|
ptr += PCIR_EA_FIRST_ENT;
|
|
|
|
/* Print BUS numbers for bridges */
|
|
if ((p->pc_hdr & PCIM_HDRTYPE) == PCIM_HDRTYPE_BRIDGE) {
|
|
val = read_config(fd, &p->pc_sel, ptr, 4);
|
|
|
|
fixed_sec_bus_nr = PCIM_EA_SEC_NR(val);
|
|
fixed_sub_bus_nr = PCIM_EA_SUB_NR(val);
|
|
|
|
printf("\n\t\t BRIDGE, sec bus [%d], sub bus [%d]",
|
|
fixed_sec_bus_nr, fixed_sub_bus_nr);
|
|
ptr += 4;
|
|
}
|
|
|
|
for (a = 0; a < num_ent; a++) {
|
|
/* Read a number of dwords in the entry */
|
|
val = read_config(fd, &p->pc_sel, ptr, 4);
|
|
ptr += 4;
|
|
ent_size = (val & PCIM_EA_ES);
|
|
|
|
for (b = 0; b < ent_size; b++) {
|
|
dw[b] = read_config(fd, &p->pc_sel, ptr, 4);
|
|
ptr += 4;
|
|
}
|
|
|
|
flags = val;
|
|
flags_pp = (flags & PCIM_EA_PP) >> PCIM_EA_PP_OFFSET;
|
|
flags_sp = (flags & PCIM_EA_SP) >> PCIM_EA_SP_OFFSET;
|
|
bei = (PCIM_EA_BEI & val) >> PCIM_EA_BEI_OFFSET;
|
|
|
|
base = dw[0] & PCIM_EA_FIELD_MASK;
|
|
max_offset = dw[1] | ~PCIM_EA_FIELD_MASK;
|
|
b = 2;
|
|
if (((dw[0] & PCIM_EA_IS_64) != 0) && (b < ent_size)) {
|
|
base |= (uint64_t)dw[b] << 32UL;
|
|
b++;
|
|
}
|
|
if (((dw[1] & PCIM_EA_IS_64) != 0)
|
|
&& (b < ent_size)) {
|
|
max_offset |= (uint64_t)dw[b] << 32UL;
|
|
b++;
|
|
}
|
|
|
|
printf("\n\t\t [%d] %s, %s, %s, base [0x%jx], size [0x%jx]"
|
|
"\n\t\t\tPrimary properties [0x%x] (%s)"
|
|
"\n\t\t\tSecondary properties [0x%x] (%s)",
|
|
bei, ea_bei_to_name(bei),
|
|
(flags & PCIM_EA_ENABLE ? "Enabled" : "Disabled"),
|
|
(flags & PCIM_EA_WRITABLE ? "Writable" : "Read-only"),
|
|
(uintmax_t)base, (uintmax_t)(max_offset + 1),
|
|
flags_pp, ea_prop_to_name(flags_pp),
|
|
flags_sp, ea_prop_to_name(flags_sp));
|
|
}
|
|
}
|
|
|
|
void
|
|
list_caps(int fd, struct pci_conf *p)
|
|
{
|
|
int express;
|
|
uint16_t sta;
|
|
uint8_t ptr, cap;
|
|
|
|
/* Are capabilities present for this device? */
|
|
sta = read_config(fd, &p->pc_sel, PCIR_STATUS, 2);
|
|
if (!(sta & PCIM_STATUS_CAPPRESENT))
|
|
return;
|
|
|
|
switch (p->pc_hdr & PCIM_HDRTYPE) {
|
|
case PCIM_HDRTYPE_NORMAL:
|
|
case PCIM_HDRTYPE_BRIDGE:
|
|
ptr = PCIR_CAP_PTR;
|
|
break;
|
|
case PCIM_HDRTYPE_CARDBUS:
|
|
ptr = PCIR_CAP_PTR_2;
|
|
break;
|
|
default:
|
|
errx(1, "list_caps: bad header type");
|
|
}
|
|
|
|
/* Walk the capability list. */
|
|
express = 0;
|
|
ptr = read_config(fd, &p->pc_sel, ptr, 1);
|
|
while (ptr != 0 && ptr != 0xff) {
|
|
cap = read_config(fd, &p->pc_sel, ptr + PCICAP_ID, 1);
|
|
printf(" cap %02x[%02x] = ", cap, ptr);
|
|
switch (cap) {
|
|
case PCIY_PMG:
|
|
cap_power(fd, p, ptr);
|
|
break;
|
|
case PCIY_AGP:
|
|
cap_agp(fd, p, ptr);
|
|
break;
|
|
case PCIY_VPD:
|
|
cap_vpd(fd, p, ptr);
|
|
break;
|
|
case PCIY_MSI:
|
|
cap_msi(fd, p, ptr);
|
|
break;
|
|
case PCIY_PCIX:
|
|
cap_pcix(fd, p, ptr);
|
|
break;
|
|
case PCIY_HT:
|
|
cap_ht(fd, p, ptr);
|
|
break;
|
|
case PCIY_VENDOR:
|
|
cap_vendor(fd, p, ptr);
|
|
break;
|
|
case PCIY_DEBUG:
|
|
cap_debug(fd, p, ptr);
|
|
break;
|
|
case PCIY_SUBVENDOR:
|
|
cap_subvendor(fd, p, ptr);
|
|
break;
|
|
case PCIY_EXPRESS:
|
|
express = 1;
|
|
cap_express(fd, p, ptr);
|
|
break;
|
|
case PCIY_MSIX:
|
|
cap_msix(fd, p, ptr);
|
|
break;
|
|
case PCIY_SATA:
|
|
cap_sata(fd, p, ptr);
|
|
break;
|
|
case PCIY_PCIAF:
|
|
cap_pciaf(fd, p, ptr);
|
|
break;
|
|
case PCIY_EA:
|
|
cap_ea(fd, p, ptr);
|
|
break;
|
|
default:
|
|
printf("unknown");
|
|
break;
|
|
}
|
|
printf("\n");
|
|
ptr = read_config(fd, &p->pc_sel, ptr + PCICAP_NEXTPTR, 1);
|
|
}
|
|
|
|
if (express)
|
|
list_ecaps(fd, p);
|
|
}
|
|
|
|
/* From <sys/systm.h>. */
|
|
static __inline uint32_t
|
|
bitcount32(uint32_t x)
|
|
{
|
|
|
|
x = (x & 0x55555555) + ((x & 0xaaaaaaaa) >> 1);
|
|
x = (x & 0x33333333) + ((x & 0xcccccccc) >> 2);
|
|
x = (x + (x >> 4)) & 0x0f0f0f0f;
|
|
x = (x + (x >> 8));
|
|
x = (x + (x >> 16)) & 0x000000ff;
|
|
return (x);
|
|
}
|
|
|
|
static void
|
|
ecap_aer(int fd, struct pci_conf *p, uint16_t ptr, uint8_t ver)
|
|
{
|
|
uint32_t sta, mask;
|
|
|
|
printf("AER %d", ver);
|
|
if (ver < 1)
|
|
return;
|
|
sta = read_config(fd, &p->pc_sel, ptr + PCIR_AER_UC_STATUS, 4);
|
|
mask = read_config(fd, &p->pc_sel, ptr + PCIR_AER_UC_SEVERITY, 4);
|
|
printf(" %d fatal", bitcount32(sta & mask));
|
|
printf(" %d non-fatal", bitcount32(sta & ~mask));
|
|
sta = read_config(fd, &p->pc_sel, ptr + PCIR_AER_COR_STATUS, 4);
|
|
printf(" %d corrected\n", bitcount32(sta));
|
|
}
|
|
|
|
static void
|
|
ecap_vc(int fd, struct pci_conf *p, uint16_t ptr, uint8_t ver)
|
|
{
|
|
uint32_t cap1;
|
|
|
|
printf("VC %d", ver);
|
|
if (ver < 1)
|
|
return;
|
|
cap1 = read_config(fd, &p->pc_sel, ptr + PCIR_VC_CAP1, 4);
|
|
printf(" max VC%d", cap1 & PCIM_VC_CAP1_EXT_COUNT);
|
|
if ((cap1 & PCIM_VC_CAP1_LOWPRI_EXT_COUNT) != 0)
|
|
printf(" lowpri VC0-VC%d",
|
|
(cap1 & PCIM_VC_CAP1_LOWPRI_EXT_COUNT) >> 4);
|
|
printf("\n");
|
|
}
|
|
|
|
static void
|
|
ecap_sernum(int fd, struct pci_conf *p, uint16_t ptr, uint8_t ver)
|
|
{
|
|
uint32_t high, low;
|
|
|
|
printf("Serial %d", ver);
|
|
if (ver < 1)
|
|
return;
|
|
low = read_config(fd, &p->pc_sel, ptr + PCIR_SERIAL_LOW, 4);
|
|
high = read_config(fd, &p->pc_sel, ptr + PCIR_SERIAL_HIGH, 4);
|
|
printf(" %08x%08x\n", high, low);
|
|
}
|
|
|
|
static void
|
|
ecap_vendor(int fd, struct pci_conf *p, uint16_t ptr, uint8_t ver)
|
|
{
|
|
uint32_t val;
|
|
|
|
printf("Vendor %d", ver);
|
|
if (ver < 1)
|
|
return;
|
|
val = read_config(fd, &p->pc_sel, ptr + 4, 4);
|
|
printf(" ID %d\n", val & 0xffff);
|
|
}
|
|
|
|
static void
|
|
ecap_sec_pcie(int fd, struct pci_conf *p, uint16_t ptr, uint8_t ver)
|
|
{
|
|
uint32_t val;
|
|
|
|
printf("PCIe Sec %d", ver);
|
|
if (ver < 1)
|
|
return;
|
|
val = read_config(fd, &p->pc_sel, ptr + 8, 4);
|
|
printf(" lane errors %#x\n", val);
|
|
}
|
|
|
|
static const char *
|
|
check_enabled(int value)
|
|
{
|
|
|
|
return (value ? "enabled" : "disabled");
|
|
}
|
|
|
|
static void
|
|
ecap_sriov(int fd, struct pci_conf *p, uint16_t ptr, uint8_t ver)
|
|
{
|
|
const char *comma, *enabled;
|
|
uint16_t iov_ctl, total_vfs, num_vfs, vf_offset, vf_stride, vf_did;
|
|
uint32_t page_caps, page_size, page_shift, size;
|
|
int i;
|
|
|
|
printf("SR-IOV %d ", ver);
|
|
|
|
iov_ctl = read_config(fd, &p->pc_sel, ptr + PCIR_SRIOV_CTL, 2);
|
|
printf("IOV %s, Memory Space %s, ARI %s\n",
|
|
check_enabled(iov_ctl & PCIM_SRIOV_VF_EN),
|
|
check_enabled(iov_ctl & PCIM_SRIOV_VF_MSE),
|
|
check_enabled(iov_ctl & PCIM_SRIOV_ARI_EN));
|
|
|
|
total_vfs = read_config(fd, &p->pc_sel, ptr + PCIR_SRIOV_TOTAL_VFS, 2);
|
|
num_vfs = read_config(fd, &p->pc_sel, ptr + PCIR_SRIOV_NUM_VFS, 2);
|
|
printf(" ");
|
|
printf("%d VFs configured out of %d supported\n", num_vfs, total_vfs);
|
|
|
|
vf_offset = read_config(fd, &p->pc_sel, ptr + PCIR_SRIOV_VF_OFF, 2);
|
|
vf_stride = read_config(fd, &p->pc_sel, ptr + PCIR_SRIOV_VF_STRIDE, 2);
|
|
printf(" ");
|
|
printf("First VF RID Offset 0x%04x, VF RID Stride 0x%04x\n", vf_offset,
|
|
vf_stride);
|
|
|
|
vf_did = read_config(fd, &p->pc_sel, ptr + PCIR_SRIOV_VF_DID, 2);
|
|
printf(" VF Device ID 0x%04x\n", vf_did);
|
|
|
|
page_caps = read_config(fd, &p->pc_sel, ptr + PCIR_SRIOV_PAGE_CAP, 4);
|
|
page_size = read_config(fd, &p->pc_sel, ptr + PCIR_SRIOV_PAGE_SIZE, 4);
|
|
printf(" ");
|
|
printf("Page Sizes: ");
|
|
comma = "";
|
|
while (page_caps != 0) {
|
|
page_shift = ffs(page_caps) - 1;
|
|
|
|
if (page_caps & page_size)
|
|
enabled = " (enabled)";
|
|
else
|
|
enabled = "";
|
|
|
|
size = (1 << (page_shift + PCI_SRIOV_BASE_PAGE_SHIFT));
|
|
printf("%s%d%s", comma, size, enabled);
|
|
comma = ", ";
|
|
|
|
page_caps &= ~(1 << page_shift);
|
|
}
|
|
printf("\n");
|
|
|
|
for (i = 0; i <= PCIR_MAX_BAR_0; i++)
|
|
print_bar(fd, p, "iov bar ", ptr + PCIR_SRIOV_BAR(i));
|
|
}
|
|
|
|
static struct {
|
|
uint16_t id;
|
|
const char *name;
|
|
} ecap_names[] = {
|
|
{ PCIZ_PWRBDGT, "Power Budgeting" },
|
|
{ PCIZ_RCLINK_DCL, "Root Complex Link Declaration" },
|
|
{ PCIZ_RCLINK_CTL, "Root Complex Internal Link Control" },
|
|
{ PCIZ_RCEC_ASSOC, "Root Complex Event Collector ASsociation" },
|
|
{ PCIZ_MFVC, "MFVC" },
|
|
{ PCIZ_RCRB, "RCRB" },
|
|
{ PCIZ_ACS, "ACS" },
|
|
{ PCIZ_ARI, "ARI" },
|
|
{ PCIZ_ATS, "ATS" },
|
|
{ PCIZ_MULTICAST, "Multicast" },
|
|
{ PCIZ_RESIZE_BAR, "Resizable BAR" },
|
|
{ PCIZ_DPA, "DPA" },
|
|
{ PCIZ_TPH_REQ, "TPH Requester" },
|
|
{ PCIZ_LTR, "LTR" },
|
|
{ 0, NULL }
|
|
};
|
|
|
|
static void
|
|
list_ecaps(int fd, struct pci_conf *p)
|
|
{
|
|
const char *name;
|
|
uint32_t ecap;
|
|
uint16_t ptr;
|
|
int i;
|
|
|
|
ptr = PCIR_EXTCAP;
|
|
ecap = read_config(fd, &p->pc_sel, ptr, 4);
|
|
if (ecap == 0xffffffff || ecap == 0)
|
|
return;
|
|
for (;;) {
|
|
printf(" ecap %04x[%03x] = ", PCI_EXTCAP_ID(ecap), ptr);
|
|
switch (PCI_EXTCAP_ID(ecap)) {
|
|
case PCIZ_AER:
|
|
ecap_aer(fd, p, ptr, PCI_EXTCAP_VER(ecap));
|
|
break;
|
|
case PCIZ_VC:
|
|
ecap_vc(fd, p, ptr, PCI_EXTCAP_VER(ecap));
|
|
break;
|
|
case PCIZ_SERNUM:
|
|
ecap_sernum(fd, p, ptr, PCI_EXTCAP_VER(ecap));
|
|
break;
|
|
case PCIZ_VENDOR:
|
|
ecap_vendor(fd, p, ptr, PCI_EXTCAP_VER(ecap));
|
|
break;
|
|
case PCIZ_SEC_PCIE:
|
|
ecap_sec_pcie(fd, p, ptr, PCI_EXTCAP_VER(ecap));
|
|
break;
|
|
case PCIZ_SRIOV:
|
|
ecap_sriov(fd, p, ptr, PCI_EXTCAP_VER(ecap));
|
|
break;
|
|
default:
|
|
name = "unknown";
|
|
for (i = 0; ecap_names[i].name != NULL; i++)
|
|
if (ecap_names[i].id == PCI_EXTCAP_ID(ecap)) {
|
|
name = ecap_names[i].name;
|
|
break;
|
|
}
|
|
printf("%s %d\n", name, PCI_EXTCAP_VER(ecap));
|
|
break;
|
|
}
|
|
ptr = PCI_EXTCAP_NEXTPTR(ecap);
|
|
if (ptr == 0)
|
|
break;
|
|
ecap = read_config(fd, &p->pc_sel, ptr, 4);
|
|
}
|
|
}
|
|
|
|
/* Find offset of a specific capability. Returns 0 on failure. */
|
|
uint8_t
|
|
pci_find_cap(int fd, struct pci_conf *p, uint8_t id)
|
|
{
|
|
uint16_t sta;
|
|
uint8_t ptr, cap;
|
|
|
|
/* Are capabilities present for this device? */
|
|
sta = read_config(fd, &p->pc_sel, PCIR_STATUS, 2);
|
|
if (!(sta & PCIM_STATUS_CAPPRESENT))
|
|
return (0);
|
|
|
|
switch (p->pc_hdr & PCIM_HDRTYPE) {
|
|
case PCIM_HDRTYPE_NORMAL:
|
|
case PCIM_HDRTYPE_BRIDGE:
|
|
ptr = PCIR_CAP_PTR;
|
|
break;
|
|
case PCIM_HDRTYPE_CARDBUS:
|
|
ptr = PCIR_CAP_PTR_2;
|
|
break;
|
|
default:
|
|
return (0);
|
|
}
|
|
|
|
ptr = read_config(fd, &p->pc_sel, ptr, 1);
|
|
while (ptr != 0 && ptr != 0xff) {
|
|
cap = read_config(fd, &p->pc_sel, ptr + PCICAP_ID, 1);
|
|
if (cap == id)
|
|
return (ptr);
|
|
ptr = read_config(fd, &p->pc_sel, ptr + PCICAP_NEXTPTR, 1);
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/* Find offset of a specific extended capability. Returns 0 on failure. */
|
|
uint16_t
|
|
pcie_find_cap(int fd, struct pci_conf *p, uint16_t id)
|
|
{
|
|
uint32_t ecap;
|
|
uint16_t ptr;
|
|
|
|
ptr = PCIR_EXTCAP;
|
|
ecap = read_config(fd, &p->pc_sel, ptr, 4);
|
|
if (ecap == 0xffffffff || ecap == 0)
|
|
return (0);
|
|
for (;;) {
|
|
if (PCI_EXTCAP_ID(ecap) == id)
|
|
return (ptr);
|
|
ptr = PCI_EXTCAP_NEXTPTR(ecap);
|
|
if (ptr == 0)
|
|
break;
|
|
ecap = read_config(fd, &p->pc_sel, ptr, 4);
|
|
}
|
|
return (0);
|
|
}
|