1154159183
its primary use is for the FEPS/FAS366 SCSI found in Sun Ultra 1e and 2 machines. Once the pci front-end is ported, this driver can replace the amd(4) driver. The code as-is is fairly stable. I've disabled tagged-queueing until I can figure out a corruption bug related to it. I'm importing it now so that people with these machines can (finally) stop netbooting and report bugs before 5.3.
291 lines
12 KiB
C
291 lines
12 KiB
C
/* $NetBSD: ncr53c9xreg.h,v 1.11 2003/02/21 17:14:05 tsutsui Exp $ */
|
|
|
|
/*
|
|
* Copyright (c) 1994 Peter Galbavy. All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. All advertising materials mentioning features or use of this software
|
|
* must display the following acknowledgement:
|
|
* This product includes software developed by Peter Galbavy.
|
|
* 4. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
/* $FreeBSD$ */
|
|
|
|
/*
|
|
* Register addresses, relative to some base address
|
|
*/
|
|
|
|
#define NCR_TCL 0x00 /* RW - Transfer Count Low */
|
|
#define NCR_TCM 0x01 /* RW - Transfer Count Mid */
|
|
#define NCR_TCH 0x0e /* RW - Transfer Count High */
|
|
/* NOT on 53C90 */
|
|
|
|
#define NCR_FIFO 0x02 /* RW - FIFO data */
|
|
|
|
#define NCR_CMD 0x03 /* RW - Command (2 deep) */
|
|
#define NCRCMD_DMA 0x80 /* DMA Bit */
|
|
#define NCRCMD_NOP 0x00 /* No Operation */
|
|
#define NCRCMD_FLUSH 0x01 /* Flush FIFO */
|
|
#define NCRCMD_RSTCHIP 0x02 /* Reset Chip */
|
|
#define NCRCMD_RSTSCSI 0x03 /* Reset SCSI Bus */
|
|
#define NCRCMD_RESEL 0x40 /* Reselect Sequence */
|
|
#define NCRCMD_SELNATN 0x41 /* Select without ATN */
|
|
#define NCRCMD_SELATN 0x42 /* Select with ATN */
|
|
#define NCRCMD_SELATNS 0x43 /* Select with ATN & Stop */
|
|
#define NCRCMD_ENSEL 0x44 /* Enable (Re)Selection */
|
|
#define NCRCMD_DISSEL 0x45 /* Disable (Re)Selection */
|
|
#define NCRCMD_SELATN3 0x46 /* Select with ATN3 */
|
|
#define NCRCMD_RESEL3 0x47 /* Reselect3 Sequence */
|
|
#define NCRCMD_SNDMSG 0x20 /* Send Message */
|
|
#define NCRCMD_SNDSTAT 0x21 /* Send Status */
|
|
#define NCRCMD_SNDDATA 0x22 /* Send Data */
|
|
#define NCRCMD_DISCSEQ 0x23 /* Disconnect Sequence */
|
|
#define NCRCMD_TERMSEQ 0x24 /* Terminate Sequence */
|
|
#define NCRCMD_TCCS 0x25 /* Target Command Comp Seq */
|
|
#define NCRCMD_DISC 0x27 /* Disconnect */
|
|
#define NCRCMD_RECMSG 0x28 /* Receive Message */
|
|
#define NCRCMD_RECCMD 0x29 /* Receive Command */
|
|
#define NCRCMD_RECDATA 0x2a /* Receive Data */
|
|
#define NCRCMD_RECCSEQ 0x2b /* Receive Command Sequence*/
|
|
#define NCRCMD_ABORT 0x04 /* Target Abort DMA */
|
|
#define NCRCMD_TRANS 0x10 /* Transfer Information */
|
|
#define NCRCMD_ICCS 0x11 /* Initiator Cmd Comp Seq */
|
|
#define NCRCMD_MSGOK 0x12 /* Message Accepted */
|
|
#define NCRCMD_TRPAD 0x18 /* Transfer Pad */
|
|
#define NCRCMD_SETATN 0x1a /* Set ATN */
|
|
#define NCRCMD_RSTATN 0x1b /* Reset ATN */
|
|
|
|
#define NCR_STAT 0x04 /* RO - Status */
|
|
#define NCRSTAT_INT 0x80 /* Interrupt */
|
|
#define NCRSTAT_GE 0x40 /* Gross Error */
|
|
#define NCRSTAT_PE 0x20 /* Parity Error */
|
|
#define NCRSTAT_TC 0x10 /* Terminal Count */
|
|
#define NCRSTAT_VGC 0x08 /* Valid Group Code */
|
|
#define NCRSTAT_PHASE 0x07 /* Phase bits */
|
|
|
|
#define NCR_SELID 0x04 /* WO - Select/Reselect Bus ID */
|
|
#define NCR_BUSID_HME 0x10 /* XXX HME reselect ID */
|
|
#define NCR_BUSID_HME32 0x40 /* XXX HME to select more than 16 */
|
|
|
|
#define NCR_INTR 0x05 /* RO - Interrupt */
|
|
#define NCRINTR_SBR 0x80 /* SCSI Bus Reset */
|
|
#define NCRINTR_ILL 0x40 /* Illegal Command */
|
|
#define NCRINTR_DIS 0x20 /* Disconnect */
|
|
#define NCRINTR_BS 0x10 /* Bus Service */
|
|
#define NCRINTR_FC 0x08 /* Function Complete */
|
|
#define NCRINTR_RESEL 0x04 /* Reselected */
|
|
#define NCRINTR_SELATN 0x02 /* Select with ATN */
|
|
#define NCRINTR_SEL 0x01 /* Selected */
|
|
|
|
#define NCR_TIMEOUT 0x05 /* WO - Select/Reselect Timeout */
|
|
|
|
#define NCR_STEP 0x06 /* RO - Sequence Step */
|
|
#define NCRSTEP_MASK 0x07 /* the last 3 bits */
|
|
#define NCRSTEP_DONE 0x04 /* command went out */
|
|
|
|
#define NCR_SYNCTP 0x06 /* WO - Synch Transfer Period */
|
|
/* Default 5 (53C9X) */
|
|
|
|
#define NCR_FFLAG 0x07 /* RO - FIFO Flags */
|
|
#define NCRFIFO_SS 0xe0 /* Sequence Step (Dup) */
|
|
#define NCRFIFO_FF 0x1f /* Bytes in FIFO */
|
|
|
|
#define NCR_SYNCOFF 0x07 /* WO - Synch Offset */
|
|
/* 0 = ASYNC */
|
|
/* 1 - 15 = SYNC bytes */
|
|
|
|
#define NCR_CFG1 0x08 /* RW - Configuration #1 */
|
|
#define NCRCFG1_SLOW 0x80 /* Slow Cable Mode */
|
|
#define NCRCFG1_SRR 0x40 /* SCSI Reset Rep Int Dis */
|
|
#define NCRCFG1_PTEST 0x20 /* Parity Test Mod */
|
|
#define NCRCFG1_PARENB 0x10 /* Enable Parity Check */
|
|
#define NCRCFG1_CTEST 0x08 /* Enable Chip Test */
|
|
#define NCRCFG1_BUSID 0x07 /* Bus ID */
|
|
|
|
#define NCR_CCF 0x09 /* WO - Clock Conversion Factor */
|
|
/* 0 = 35.01 - 40MHz */
|
|
/* NEVER SET TO 1 */
|
|
/* 2 = 10MHz */
|
|
/* 3 = 10.01 - 15MHz */
|
|
/* 4 = 15.01 - 20MHz */
|
|
/* 5 = 20.01 - 25MHz */
|
|
/* 6 = 25.01 - 30MHz */
|
|
/* 7 = 30.01 - 35MHz */
|
|
|
|
#define NCR_TEST 0x0a /* WO - Test (Chip Test Only) */
|
|
|
|
#define NCR_CFG2 0x0b /* RW - Configuration #2 */
|
|
#define NCRCFG2_RSVD 0xa0 /* reserved */
|
|
#define NCRCFG2_FE 0x40 /* Features Enable */
|
|
#define NCRCFG2_DREQ 0x10 /* DREQ High Impedance */
|
|
#define NCRCFG2_SCSI2 0x08 /* SCSI-2 Enable */
|
|
#define NCRCFG2_BPA 0x04 /* Target Bad Parity Abort */
|
|
#define NCRCFG2_RPE 0x02 /* Register Parity Error */
|
|
#define NCRCFG2_DPE 0x01 /* DMA Parity Error */
|
|
|
|
#define NCRCFG2_HMEFE 0x10 /* HME feature enable */
|
|
#define NCRCFG2_HME32 0x80 /* HME 32 extended */
|
|
|
|
/* Config #3 only on 53C9X */
|
|
#define NCR_CFG3 0x0c /* RW - Configuration #3 */
|
|
#define NCRCFG3_RSVD 0xe0 /* reserved */
|
|
#define NCRCFG3_IDM 0x10 /* ID Message Res Check */
|
|
#define NCRCFG3_QTE 0x08 /* Queue Tag Enable */
|
|
#define NCRCFG3_CDB 0x04 /* CDB 10-bytes OK */
|
|
#define NCRCFG3_FSCSI 0x02 /* Fast SCSI */
|
|
#define NCRCFG3_FCLK 0x01 /* Fast Clock (>25MHz) */
|
|
|
|
/*
|
|
* For some unknown reason, the ESP406/FAS408 looks like every
|
|
* other ncr53c9x, except for configuration #3 register. At any
|
|
* rate, if you're dealing with these chips, you need to use these
|
|
* defines instead.
|
|
*/
|
|
|
|
/* Config #3 different on ESP406/FAS408 */
|
|
#define NCR_ESPCFG3 0x0c /* RW - Configuration #3 */
|
|
#define NCRESPCFG3_IDM 0x80 /* ID Message Res Check */
|
|
#define NCRESPCFG3_QTE 0x40 /* Queue Tag Enable */
|
|
#define NCRESPCFG3_CDB 0x20 /* CDB 10-bytes OK */
|
|
#define NCRESPCFG3_FSCSI 0x10 /* Fast SCSI */
|
|
#define NCRESPCFG3_SRESB 0x08 /* Save Residual Byte */
|
|
#define NCRESPCFG3_FCLK 0x04 /* Fast Clock (>25MHz) */
|
|
#define NCRESPCFG3_ADMA 0x02 /* Alternate DMA Mode */
|
|
#define NCRESPCFG3_T8M 0x01 /* Threshold 8 Mode */
|
|
|
|
/* Config #3 also different on NCR53CF9x/FAS216 */
|
|
#define NCR_F9XCFG3 0x0c /* RW - Configuration #3 */
|
|
#define NCRF9XCFG3_IDM 0x80 /* ID Message Res Check */
|
|
#define NCRF9XCFG3_QTE 0x40 /* Queue Tag Enable */
|
|
#define NCRF9XCFG3_CDB 0x20 /* CDB 10-bytes OK */
|
|
#define NCRF9XCFG3_FSCSI 0x10 /* Fast SCSI */
|
|
#define NCRF9XCFG3_FCLK 0x08 /* Fast Clock (>25MHz) */
|
|
#define NCRF9XCFG3_SRESB 0x04 /* Save Residual Byte */
|
|
#define NCRF9XCFG3_ADMA 0x02 /* Alternate DMA Mode */
|
|
#define NCRF9XCFG3_T8M 0x01 /* Threshold 8 Mode */
|
|
|
|
/* Config #3 on FAS366 */
|
|
#define NCRFASCFG3_OBAUTO 0x80 /* auto push odd-byte to DMA */
|
|
#define NCRFASCFG3_EWIDE 0x40 /* Enable Wide-SCSI */
|
|
#define NCRFASCFG3_IDBIT3 0x20 /* Bit 3 of HME SCSI-ID */
|
|
#define NCRFASCFG3_IDRESCHK 0x10 /* ID message checking */
|
|
#define NCRFASCFG3_QUENB 0x08 /* 3-byte msg support */
|
|
#define NCRFASCFG3_CDB10 0x04 /* group 2 scsi-2 support */
|
|
#define NCRFASCFG3_FASTSCSI 0x02 /* 10 MB/S fast scsi mode */
|
|
#define NCRFASCFG3_FASTCLK 0x01 /* fast clock mode */
|
|
|
|
/* Config #4 only on ESP406/FAS408 */
|
|
#define NCR_CFG4 0x0d /* RW - Configuration #4 */
|
|
#define NCRCFG4_CRS1 0x80 /* Select register set #1 */
|
|
#define NCRCFG4_RSVD 0x7b /* reserved */
|
|
#define NCRCFG4_ACTNEG 0x04 /* Active negation */
|
|
|
|
/*
|
|
The following registers are only on the ESP406/FAS408. The
|
|
documentation refers to them as "Control Register Set #1".
|
|
These are the registers that are visible when bit 7 of
|
|
register 0x0d is set. This bit is common to both register sets.
|
|
*/
|
|
|
|
#define NCR_JMP 0x00 /* RO - Jumper Sense Register */
|
|
#define NCRJMP_RSVD 0xc0 /* reserved */
|
|
#define NCRJMP_ROMSZ 0x20 /* ROM Size 1=16K, 0=32K */
|
|
#define NCRJMP_J4 0x10 /* Jumper #4 */
|
|
#define NCRJMP_J3 0x08 /* Jumper #3 */
|
|
#define NCRJMP_J2 0x04 /* Jumper #2 */
|
|
#define NCRJMP_J1 0x02 /* Jumper #1 */
|
|
#define NCRJMP_J0 0x01 /* Jumper #0 */
|
|
|
|
#define NCR_PIOFIFO 0x04 /* WO - PIO FIFO, 4 bytes deep */
|
|
|
|
#define NCR_PSTAT 0x08 /* RW - PIO Status Register */
|
|
#define NCRPSTAT_PERR 0x80 /* PIO Error */
|
|
#define NCRPSTAT_SIRQ 0x40 /* Active High of SCSI IRQ */
|
|
#define NCRPSTAT_ATAI 0x20 /* ATA IRQ */
|
|
#define NCRPSTAT_FEMPT 0x10 /* PIO FIFO Empty */
|
|
#define NCRPSTAT_F13 0x08 /* PIO FIFO 1/3 */
|
|
#define NCRPSTAT_F23 0x04 /* PIO FIFO 2/3 */
|
|
#define NCRPSTAT_FFULL 0x02 /* PIO FIFO Full */
|
|
#define NCRPSTAT_PIOM 0x01 /* PIO/DMA Mode */
|
|
|
|
#define NCR_PIOI 0x0b /* RW - PIO Interrupt Enable */
|
|
#define NCRPIOI_RSVD 0xe0 /* reserved */
|
|
#define NCRPIOI_EMPTY 0x10 /* IRQ When Empty */
|
|
#define NCRPIOI_13 0x08 /* IRQ When 1/3 */
|
|
#define NCRPIOI_23 0x04 /* IRQ When 2/3 */
|
|
#define NCRPIOI_FULL 0x02 /* IRQ When Full */
|
|
#define NCRPIOI_FINV 0x01 /* Flag Invert */
|
|
|
|
#define NCR_CFG5 0x0d /* RW - Configuration #5 */
|
|
#define NCRCFG5_CRS1 0x80 /* Select Register Set #1 */
|
|
#define NCRCFG5_SRAM 0x40 /* SRAM Memory Map */
|
|
#define NCRCFG5_AADDR 0x20 /* Auto Address */
|
|
#define NCRCFG5_PTRINC 0x10 /* Pointer Increment */
|
|
#define NCRCFG5_LOWPWR 0x08 /* Low Power Mode */
|
|
#define NCRCFG5_SINT 0x04 /* SCSI Interupt Enable */
|
|
#define NCRCFG5_INTP 0x02 /* INT Polarity */
|
|
#define NCRCFG5_AINT 0x01 /* ATA Interupt Enable */
|
|
|
|
#define NCR_SIGNTR 0x0e /* RO - Signature */
|
|
|
|
/* Am53c974 Config #3 */
|
|
#define NCR_AMDCFG3 0x0c /* RW - Configuration #3 */
|
|
#define NCRAMDCFG3_IDM 0x80 /* ID Message Res Check */
|
|
#define NCRAMDCFG3_QTE 0x40 /* Queue Tag Enable */
|
|
#define NCRAMDCFG3_CDB 0x20 /* CDB 10-bytes OK */
|
|
#define NCRAMDCFG3_FSCSI 0x10 /* Fast SCSI */
|
|
#define NCRAMDCFG3_FCLK 0x08 /* Fast Clock (40MHz) */
|
|
#define NCRAMDCFG3_RSVD 0x07 /* Reserved */
|
|
|
|
/* Am53c974 Config #4 */
|
|
#define NCR_AMDCFG4 0x0d /* RW - Configuration #4 */
|
|
#define NCRAMDCFG4_GE 0xc0 /* Glitch Eater */
|
|
#define NCRAMDCFG4_GE12NS 0x00 /* Signal window 12ns */
|
|
#define NCRAMDCFG4_GE25NS 0x80 /* Signal window 25ns */
|
|
#define NCRAMDCFG4_GE35NS 0x40 /* Signal window 35ns */
|
|
#define NCRAMDCFG4_GE0NS 0xc0 /* Signal window 0ns */
|
|
#define NCRAMDCFG4_PWD 0x20 /* Reduced power feature */
|
|
#define NCRAMDCFG4_RSVD 0x13 /* Reserved */
|
|
#define NCRAMDCFG4_RAE 0x08 /* Active neg. REQ/ACK */
|
|
#define NCRAMDCFG4_RADE 0x04 /* Active neg. REQ/ACK/DAT */
|
|
|
|
/*
|
|
* FAS366
|
|
*/
|
|
#define NCR_RCL NCR_TCH /* Recommand counter low */
|
|
#define NCR_RCH 0xf /* Recommand counter high */
|
|
#define NCR_UID NCR_RCL /* fas366 part-uniq id */
|
|
|
|
|
|
/* status register #2 definitions (read only) */
|
|
#define NCR_STAT2 NCR_CCF
|
|
#define NCRFAS_STAT2_SEQCNT 0x01 /* Sequence counter bit 7-3 enabled */
|
|
#define NCRFAS_STAT2_FLATCHED 0x02 /* FIFO flags register latched */
|
|
#define NCRFAS_STAT2_CLATCHED 0x04 /* Xfer cntr & recommand ctr latched */
|
|
#define NCRFAS_STAT2_CACTIVE 0x08 /* Command register is active */
|
|
#define NCRFAS_STAT2_SCSI16 0x10 /* SCSI interface is wide */
|
|
#define NCRFAS_STAT2_ISHUTTLE 0x20 /* FIFO Top register contains 1 byte */
|
|
#define NCRFAS_STAT2_OSHUTTLE 0x40 /* next byte from FIFO is MSB */
|
|
#define NCRFAS_STAT2_EMPTY 0x80 /* FIFO is empty */
|
|
|