c9b72549b1
to be able to use 48bit addressing mode, but says the 48bit size of the disk is 0, which according to spec means it can address zero sectors in 48bit mode, why then say it supports 48bit mode at all..
989 lines
30 KiB
C
989 lines
30 KiB
C
/*-
|
|
* Copyright (c) 1998,1999,2000,2001,2002 Søren Schmidt <sos@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer,
|
|
* without modification, immediately at the beginning of the file.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*
|
|
* $FreeBSD$
|
|
*/
|
|
|
|
#include "opt_global.h"
|
|
#include "opt_ata.h"
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/ata.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/bio.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/conf.h>
|
|
#include <sys/disk.h>
|
|
#include <sys/devicestat.h>
|
|
#include <sys/cons.h>
|
|
#include <sys/sysctl.h>
|
|
#include <vm/vm.h>
|
|
#include <vm/pmap.h>
|
|
#include <machine/md_var.h>
|
|
#include <machine/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <dev/ata/ata-all.h>
|
|
#include <dev/ata/ata-disk.h>
|
|
#include <dev/ata/ata-raid.h>
|
|
|
|
/* device structures */
|
|
static d_open_t adopen;
|
|
static d_close_t adclose;
|
|
static d_strategy_t adstrategy;
|
|
static d_dump_t addump;
|
|
static struct cdevsw ad_cdevsw = {
|
|
/* open */ adopen,
|
|
/* close */ adclose,
|
|
/* read */ physread,
|
|
/* write */ physwrite,
|
|
/* ioctl */ noioctl,
|
|
/* poll */ nopoll,
|
|
/* mmap */ nommap,
|
|
/* strategy */ adstrategy,
|
|
/* name */ "ad",
|
|
/* maj */ 116,
|
|
/* dump */ addump,
|
|
/* psize */ nopsize,
|
|
/* flags */ D_DISK,
|
|
};
|
|
static struct cdevsw addisk_cdevsw;
|
|
|
|
/* prototypes */
|
|
static void ad_invalidatequeue(struct ad_softc *, struct ad_request *);
|
|
static int ad_tagsupported(struct ad_softc *);
|
|
static void ad_timeout(struct ad_request *);
|
|
static void ad_free(struct ad_request *);
|
|
static int ad_version(u_int16_t);
|
|
|
|
/* misc defines */
|
|
#define AD_MAX_RETRIES 3
|
|
|
|
/* internal vars */
|
|
static u_int32_t adp_lun_map = 0;
|
|
static int ata_dma = 1;
|
|
static int ata_wc = 0;
|
|
static int ata_tags = 0;
|
|
TUNABLE_INT("hw.ata.ata_dma", &ata_dma);
|
|
TUNABLE_INT("hw.ata.wc", &ata_wc);
|
|
TUNABLE_INT("hw.ata.tags", &ata_tags);
|
|
static MALLOC_DEFINE(M_AD, "AD driver", "ATA disk driver");
|
|
|
|
/* sysctl vars */
|
|
SYSCTL_DECL(_hw_ata);
|
|
SYSCTL_INT(_hw_ata, OID_AUTO, ata_dma, CTLFLAG_RD, &ata_dma, 0,
|
|
"ATA disk DMA mode control");
|
|
SYSCTL_INT(_hw_ata, OID_AUTO, wc, CTLFLAG_RD, &ata_wc, 0,
|
|
"ATA disk write caching");
|
|
SYSCTL_INT(_hw_ata, OID_AUTO, tags, CTLFLAG_RD, &ata_tags, 0,
|
|
"ATA disk tagged queuing support");
|
|
|
|
/* experimental cache flush on BIO_ORDERED */
|
|
#undef ATA_FLUSHCACHE_ON
|
|
|
|
void
|
|
ad_attach(struct ata_device *atadev)
|
|
{
|
|
struct ad_softc *adp;
|
|
dev_t dev;
|
|
|
|
if (!(adp = malloc(sizeof(struct ad_softc), M_AD, M_NOWAIT | M_ZERO))) {
|
|
ata_prtdev(atadev, "failed to allocate driver storage\n");
|
|
return;
|
|
}
|
|
adp->device = atadev;
|
|
#ifdef ATA_STATIC_ID
|
|
adp->lun = (device_get_unit(atadev->channel->dev)<<1)+ATA_DEV(atadev->unit);
|
|
#else
|
|
adp->lun = ata_get_lun(&adp_lun_map);
|
|
#endif
|
|
ata_set_name(atadev, "ad", adp->lun);
|
|
adp->heads = atadev->param->heads;
|
|
adp->sectors = atadev->param->sectors;
|
|
adp->total_secs = atadev->param->cylinders * adp->heads * adp->sectors;
|
|
|
|
/* does this device need oldstyle CHS addressing */
|
|
if (!ad_version(atadev->param->version_major) ||
|
|
!(atadev->param->atavalid & ATA_FLAG_54_58) || !atadev->param->lba_size)
|
|
adp->flags |= AD_F_CHS_USED;
|
|
|
|
/* use the 28bit LBA size if valid */
|
|
if (atadev->param->cylinders == 16383 &&
|
|
adp->total_secs < atadev->param->lba_size)
|
|
adp->total_secs = atadev->param->lba_size;
|
|
|
|
/* use the 48bit LBA size if valid */
|
|
if (atadev->param->support.address48 &&
|
|
atadev->param->lba_size48 > 268435455)
|
|
adp->total_secs = atadev->param->lba_size48;
|
|
|
|
/* use multiple sectors/interrupt if device supports it */
|
|
adp->transfersize = DEV_BSIZE;
|
|
if (ad_version(atadev->param->version_major)) {
|
|
int secsperint = max(1, min(atadev->param->sectors_intr, 16));
|
|
|
|
if (!ata_command(atadev, ATA_C_SET_MULTI, 0, secsperint,
|
|
0, ATA_WAIT_INTR) && !ata_wait(atadev, 0))
|
|
adp->transfersize *= secsperint;
|
|
}
|
|
|
|
/* enable read caching if not default on device */
|
|
if (ata_command(atadev, ATA_C_SETFEATURES,
|
|
0, 0, ATA_C_F_ENAB_RCACHE, ATA_WAIT_INTR))
|
|
ata_prtdev(atadev, "enabling readahead cache failed\n");
|
|
|
|
/* enable write caching if allowed and not default on device */
|
|
if (ata_wc || (ata_tags && ad_tagsupported(adp))) {
|
|
if (ata_command(atadev, ATA_C_SETFEATURES,
|
|
0, 0, ATA_C_F_ENAB_WCACHE, ATA_WAIT_INTR))
|
|
ata_prtdev(atadev, "enabling write cache failed\n");
|
|
}
|
|
else {
|
|
if (ata_command(atadev, ATA_C_SETFEATURES,
|
|
0, 0, ATA_C_F_DIS_WCACHE, ATA_WAIT_INTR))
|
|
ata_prtdev(atadev, "disabling write cache failed\n");
|
|
}
|
|
|
|
/* use DMA if allowed and if drive/controller supports it */
|
|
if (ata_dma)
|
|
ata_dmainit(atadev->channel, atadev->unit, ata_pmode(atadev->param),
|
|
ata_wmode(atadev->param), ata_umode(atadev->param));
|
|
else
|
|
ata_dmainit(atadev->channel, atadev->unit,
|
|
ata_pmode(atadev->param), -1, -1);
|
|
|
|
/* use tagged queueing if allowed and supported */
|
|
if (ata_tags && ad_tagsupported(adp)) {
|
|
adp->num_tags = atadev->param->queuelen;
|
|
adp->flags |= AD_F_TAG_ENABLED;
|
|
adp->device->channel->flags |= ATA_QUEUED;
|
|
if (ata_command(atadev, ATA_C_SETFEATURES,
|
|
0, 0, ATA_C_F_DIS_RELIRQ, ATA_WAIT_INTR))
|
|
ata_prtdev(atadev, "disabling release interrupt failed\n");
|
|
if (ata_command(atadev, ATA_C_SETFEATURES,
|
|
0, 0, ATA_C_F_DIS_SRVIRQ, ATA_WAIT_INTR))
|
|
ata_prtdev(atadev, "disabling service interrupt failed\n");
|
|
}
|
|
|
|
devstat_add_entry(&adp->stats, "ad", adp->lun, DEV_BSIZE,
|
|
DEVSTAT_NO_ORDERED_TAGS,
|
|
DEVSTAT_TYPE_DIRECT | DEVSTAT_TYPE_IF_IDE,
|
|
DEVSTAT_PRIORITY_DISK);
|
|
|
|
dev = disk_create(adp->lun, &adp->disk, 0, &ad_cdevsw, &addisk_cdevsw);
|
|
dev->si_drv1 = adp;
|
|
dev->si_iosize_max = 256 * DEV_BSIZE;
|
|
adp->dev = dev;
|
|
bioq_init(&adp->queue);
|
|
|
|
/* construct the disklabel */
|
|
bzero(&adp->disk.d_label, sizeof(struct disklabel));
|
|
adp->disk.d_label.d_secsize = DEV_BSIZE;
|
|
adp->disk.d_label.d_nsectors = adp->sectors;
|
|
adp->disk.d_label.d_ntracks = adp->heads;
|
|
adp->disk.d_label.d_ncylinders = adp->total_secs/(adp->heads*adp->sectors);
|
|
adp->disk.d_label.d_secpercyl = adp->sectors * adp->heads;
|
|
adp->disk.d_label.d_secperunit = adp->total_secs;
|
|
|
|
atadev->driver = adp;
|
|
atadev->flags = 0;
|
|
|
|
/* if this disk belongs to an ATA RAID dont print the probe */
|
|
if (!ata_raid_probe(adp))
|
|
adp->flags |= AD_F_RAID_SUBDISK;
|
|
else
|
|
ad_print(adp, "");
|
|
}
|
|
|
|
void
|
|
ad_detach(struct ata_device *atadev, int flush) /* get rid of flush XXX SOS */
|
|
{
|
|
struct ad_softc *adp = atadev->driver;
|
|
struct ad_request *request;
|
|
struct bio *bp;
|
|
|
|
atadev->flags |= ATA_D_DETACHING;
|
|
ata_prtdev(atadev, "removed from configuration\n");
|
|
ad_invalidatequeue(adp, NULL);
|
|
TAILQ_FOREACH(request, &atadev->channel->ata_queue, chain) {
|
|
if (request->softc != adp)
|
|
continue;
|
|
TAILQ_REMOVE(&atadev->channel->ata_queue, request, chain);
|
|
biofinish(request->bp, NULL, ENXIO);
|
|
ad_free(request);
|
|
}
|
|
while ((bp = bioq_first(&adp->queue))) {
|
|
bioq_remove(&adp->queue, bp);
|
|
biofinish(bp, NULL, ENXIO);
|
|
}
|
|
disk_invalidate(&adp->disk);
|
|
disk_destroy(adp->dev);
|
|
devstat_remove_entry(&adp->stats);
|
|
if (flush) {
|
|
if (ata_command(atadev, ATA_C_FLUSHCACHE, 0, 0, 0, ATA_WAIT_READY))
|
|
ata_prtdev(atadev, "flushing cache on detach failed\n");
|
|
}
|
|
ata_free_name(atadev);
|
|
ata_free_lun(&adp_lun_map, adp->lun);
|
|
atadev->driver = NULL;
|
|
atadev->flags = 0;
|
|
free(adp, M_AD);
|
|
}
|
|
|
|
static int
|
|
adopen(dev_t dev, int flags, int fmt, struct thread *td)
|
|
{
|
|
struct ad_softc *adp = dev->si_drv1;
|
|
|
|
if (adp->flags & AD_F_RAID_SUBDISK)
|
|
return EBUSY;
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
adclose(dev_t dev, int flags, int fmt, struct thread *td)
|
|
{
|
|
struct ad_softc *adp = dev->si_drv1;
|
|
|
|
if (ata_command(adp->device, ATA_C_FLUSHCACHE, 0, 0, 0, ATA_WAIT_READY))
|
|
ata_prtdev(adp->device, "flushing cache on close failed\n");
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
adstrategy(struct bio *bp)
|
|
{
|
|
struct ad_softc *adp = bp->bio_dev->si_drv1;
|
|
int s;
|
|
|
|
if (adp->device->flags & ATA_D_DETACHING) {
|
|
biofinish(bp, NULL, ENXIO);
|
|
return;
|
|
}
|
|
s = splbio();
|
|
bioqdisksort(&adp->queue, bp);
|
|
ata_start(adp->device->channel);
|
|
splx(s);
|
|
}
|
|
|
|
int
|
|
addump(dev_t dev)
|
|
{
|
|
struct ad_softc *adp = dev->si_drv1;
|
|
struct ad_request request;
|
|
u_int count, blkno, secsize;
|
|
vm_offset_t addr = 0;
|
|
long blkcnt;
|
|
int dumppages = MAXDUMPPGS;
|
|
int error;
|
|
int i;
|
|
|
|
if ((error = disk_dumpcheck(dev, &count, &blkno, &secsize)))
|
|
return error;
|
|
|
|
if (!adp)
|
|
return ENXIO;
|
|
|
|
/* force PIO mode for dumps */
|
|
adp->device->mode = ATA_PIO;
|
|
ata_reinit(adp->device->channel);
|
|
|
|
blkcnt = howmany(PAGE_SIZE, secsize);
|
|
|
|
while (count > 0) {
|
|
caddr_t va = NULL;
|
|
DELAY(1000);
|
|
|
|
if ((count / blkcnt) < dumppages)
|
|
dumppages = count / blkcnt;
|
|
|
|
for (i = 0; i < dumppages; ++i) {
|
|
vm_offset_t a = addr + (i * PAGE_SIZE);
|
|
if (is_physical_memory(a))
|
|
va = pmap_kenter_temporary(trunc_page(a), i);
|
|
else
|
|
va = pmap_kenter_temporary(trunc_page(0), i);
|
|
}
|
|
|
|
bzero(&request, sizeof(struct ad_request));
|
|
request.softc = adp;
|
|
request.blockaddr = blkno;
|
|
request.bytecount = PAGE_SIZE * dumppages;
|
|
request.data = va;
|
|
|
|
while (request.bytecount > 0) {
|
|
ad_transfer(&request);
|
|
if (request.flags & ADR_F_ERROR)
|
|
return EIO;
|
|
request.donecount += request.currentsize;
|
|
request.bytecount -= request.currentsize;
|
|
DELAY(20);
|
|
}
|
|
|
|
if (dumpstatus(addr, (off_t)count * DEV_BSIZE) < 0)
|
|
return EINTR;
|
|
|
|
blkno += blkcnt * dumppages;
|
|
count -= blkcnt * dumppages;
|
|
addr += PAGE_SIZE * dumppages;
|
|
}
|
|
|
|
if (ata_wait(adp->device, ATA_S_READY | ATA_S_DSC) < 0)
|
|
ata_prtdev(adp->device, "timeout waiting for final ready\n");
|
|
return 0;
|
|
}
|
|
|
|
void
|
|
ad_start(struct ata_device *atadev)
|
|
{
|
|
struct ad_softc *adp = atadev->driver;
|
|
struct bio *bp = bioq_first(&adp->queue);
|
|
struct ad_request *request;
|
|
int tag = 0;
|
|
|
|
if (!bp)
|
|
return;
|
|
|
|
#ifdef ATA_FLUSHCACHE_ON
|
|
/*
|
|
* if BIO_ORDERED is set cache should be flushed, if there are
|
|
* any outstanding requests, hold off and wait for them to finish
|
|
*/
|
|
if (adp->flags & AD_F_TAG_ENABLED &&
|
|
bp->bio_flags & BIO_ORDERED && adp->outstanding > 0)
|
|
return;
|
|
#endif
|
|
|
|
/* if tagged queueing enabled get next free tag */
|
|
if (adp->flags & AD_F_TAG_ENABLED) {
|
|
while (tag <= adp->num_tags && adp->tags[tag])
|
|
tag++;
|
|
if (tag > adp->num_tags )
|
|
return;
|
|
}
|
|
|
|
if (!(request = malloc(sizeof(struct ad_request), M_AD, M_NOWAIT|M_ZERO))) {
|
|
ata_prtdev(atadev, "out of memory in start\n");
|
|
return;
|
|
}
|
|
|
|
/* setup request */
|
|
request->softc = adp;
|
|
request->bp = bp;
|
|
request->blockaddr = bp->bio_pblkno;
|
|
request->bytecount = bp->bio_bcount;
|
|
request->data = bp->bio_data;
|
|
request->tag = tag;
|
|
if (bp->bio_cmd == BIO_READ)
|
|
request->flags |= ADR_F_READ;
|
|
if (adp->device->mode >= ATA_DMA) {
|
|
if (!(request->dmatab = ata_dmaalloc(atadev->channel, atadev->unit)))
|
|
adp->device->mode = ATA_PIO;
|
|
}
|
|
|
|
/* insert in tag array */
|
|
adp->tags[tag] = request;
|
|
|
|
/* remove from drive queue */
|
|
bioq_remove(&adp->queue, bp);
|
|
|
|
/* link onto controller queue */
|
|
TAILQ_INSERT_TAIL(&atadev->channel->ata_queue, request, chain);
|
|
}
|
|
|
|
int
|
|
ad_transfer(struct ad_request *request)
|
|
{
|
|
struct ad_softc *adp;
|
|
u_int64_t lba;
|
|
u_int32_t count, max_count;
|
|
u_int8_t cmd;
|
|
int flags = ATA_IMMEDIATE;
|
|
|
|
/* get request params */
|
|
adp = request->softc;
|
|
|
|
/* calculate transfer details */
|
|
lba = request->blockaddr + (request->donecount / DEV_BSIZE);
|
|
|
|
if (request->donecount == 0) {
|
|
|
|
/* start timeout for this transfer */
|
|
if (dumping)
|
|
request->timeout_handle.callout = NULL;
|
|
else
|
|
request->timeout_handle =
|
|
timeout((timeout_t*)ad_timeout, request, 10 * hz);
|
|
|
|
/* setup transfer parameters !! 65536 for 48bit SOS XXX */
|
|
count = howmany(request->bytecount, DEV_BSIZE);
|
|
max_count = adp->device->param->support.address48 ? 65536 : 256;
|
|
if (count > max_count) {
|
|
ata_prtdev(adp->device,
|
|
"count %d size transfers not supported\n", count);
|
|
count = max_count;
|
|
}
|
|
|
|
if (adp->flags & AD_F_CHS_USED) {
|
|
int sector = (lba % adp->sectors) + 1;
|
|
int cylinder = lba / (adp->sectors * adp->heads);
|
|
int head = (lba % (adp->sectors * adp->heads)) / adp->sectors;
|
|
|
|
lba = (sector&0xff) | ((cylinder&0xffff)<<8) | ((head&0xf)<<24);
|
|
adp->device->flags |= ATA_D_USE_CHS;
|
|
}
|
|
|
|
/* setup first transfer length */
|
|
request->currentsize = min(request->bytecount, adp->transfersize);
|
|
|
|
devstat_start_transaction(&adp->stats);
|
|
|
|
/* does this drive & transfer work with DMA ? */
|
|
request->flags &= ~ADR_F_DMA_USED;
|
|
if (adp->device->mode >= ATA_DMA &&
|
|
!ata_dmasetup(adp->device->channel, adp->device->unit,
|
|
request->dmatab, request->data, request->bytecount)) {
|
|
request->flags |= ADR_F_DMA_USED;
|
|
request->currentsize = request->bytecount;
|
|
|
|
/* do we have tags enabled ? */
|
|
if (adp->flags & AD_F_TAG_ENABLED) {
|
|
cmd = (request->flags & ADR_F_READ) ?
|
|
ATA_C_READ_DMA_QUEUED : ATA_C_WRITE_DMA_QUEUED;
|
|
|
|
if (ata_command(adp->device, cmd, lba,
|
|
request->tag << 3, count, flags)) {
|
|
ata_prtdev(adp->device, "error executing command");
|
|
goto transfer_failed;
|
|
}
|
|
if (ata_wait(adp->device, ATA_S_READY)) {
|
|
ata_prtdev(adp->device, "timeout waiting for READY\n");
|
|
goto transfer_failed;
|
|
}
|
|
adp->outstanding++;
|
|
|
|
/* if ATA bus RELEASE check for SERVICE */
|
|
if (adp->flags & AD_F_TAG_ENABLED &&
|
|
ATA_INB(adp->device->channel->r_io, ATA_IREASON) &
|
|
ATA_I_RELEASE)
|
|
return ad_service(adp, 1);
|
|
}
|
|
else {
|
|
cmd = (request->flags & ADR_F_READ) ?
|
|
ATA_C_READ_DMA : ATA_C_WRITE_DMA;
|
|
|
|
if (ata_command(adp->device, cmd, lba, count, 0, flags)) {
|
|
ata_prtdev(adp->device, "error executing command");
|
|
goto transfer_failed;
|
|
}
|
|
#if 0
|
|
/*
|
|
* wait for data transfer phase
|
|
*
|
|
* well this should be here acording to specs, but older
|
|
* promise controllers doesn't like it, they lockup!
|
|
*/
|
|
if (ata_wait(adp->device, ATA_S_READY | ATA_S_DRQ)) {
|
|
ata_prtdev(adp->device, "timeout waiting for data phase\n");
|
|
goto transfer_failed;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
/* start transfer, return and wait for interrupt */
|
|
ata_dmastart(adp->device->channel, adp->device->unit,
|
|
request->dmatab, request->flags & ADR_F_READ);
|
|
return ATA_OP_CONTINUES;
|
|
}
|
|
|
|
/* does this drive support multi sector transfers ? */
|
|
if (request->currentsize > DEV_BSIZE)
|
|
cmd = request->flags&ADR_F_READ ? ATA_C_READ_MUL : ATA_C_WRITE_MUL;
|
|
|
|
/* just plain old single sector transfer */
|
|
else
|
|
cmd = request->flags&ADR_F_READ ? ATA_C_READ : ATA_C_WRITE;
|
|
|
|
if (ata_command(adp->device, cmd, lba, count, 0, flags)){
|
|
ata_prtdev(adp->device, "error executing command");
|
|
goto transfer_failed;
|
|
}
|
|
}
|
|
|
|
/* calculate this transfer length */
|
|
request->currentsize = min(request->bytecount, adp->transfersize);
|
|
|
|
/* if this is a PIO read operation, return and wait for interrupt */
|
|
if (request->flags & ADR_F_READ)
|
|
return ATA_OP_CONTINUES;
|
|
|
|
/* ready to write PIO data ? */
|
|
if (ata_wait(adp->device, (ATA_S_READY | ATA_S_DSC | ATA_S_DRQ)) < 0) {
|
|
ata_prtdev(adp->device, "timeout waiting for DRQ");
|
|
goto transfer_failed;
|
|
}
|
|
|
|
/* output the data */
|
|
if (adp->device->channel->flags & ATA_USE_16BIT)
|
|
ATA_OUTSW(adp->device->channel->r_io, ATA_DATA,
|
|
(void *)((uintptr_t)request->data + request->donecount),
|
|
request->currentsize / sizeof(int16_t));
|
|
else
|
|
ATA_OUTSL(adp->device->channel->r_io, ATA_DATA,
|
|
(void *)((uintptr_t)request->data + request->donecount),
|
|
request->currentsize / sizeof(int32_t));
|
|
return ATA_OP_CONTINUES;
|
|
|
|
transfer_failed:
|
|
untimeout((timeout_t *)ad_timeout, request, request->timeout_handle);
|
|
ad_invalidatequeue(adp, request);
|
|
printf(" - resetting\n");
|
|
|
|
/* if retries still permit, reinject this request */
|
|
if (request->retries++ < AD_MAX_RETRIES)
|
|
TAILQ_INSERT_HEAD(&adp->device->channel->ata_queue, request, chain);
|
|
else {
|
|
/* retries all used up, return error */
|
|
request->bp->bio_error = EIO;
|
|
request->bp->bio_flags |= BIO_ERROR;
|
|
request->bp->bio_resid = request->bytecount;
|
|
biofinish(request->bp, &adp->stats, 0);
|
|
ad_free(request);
|
|
}
|
|
ata_reinit(adp->device->channel);
|
|
return ATA_OP_CONTINUES;
|
|
}
|
|
|
|
int
|
|
ad_interrupt(struct ad_request *request)
|
|
{
|
|
struct ad_softc *adp = request->softc;
|
|
int dma_stat = 0;
|
|
|
|
#ifdef ATA_FLUSHCACHE_ON
|
|
if (request->flags & ADR_F_FLUSHCACHE)
|
|
goto finish;
|
|
#endif
|
|
/* finish DMA transfer */
|
|
if (request->flags & ADR_F_DMA_USED)
|
|
dma_stat = ata_dmadone(adp->device->channel);
|
|
|
|
/* do we have a corrected soft error ? */
|
|
if (adp->device->channel->status & ATA_S_CORR)
|
|
diskerr(request->bp, "soft error (ECC corrected)",
|
|
request->blockaddr + (request->donecount / DEV_BSIZE),
|
|
&adp->disk.d_label);
|
|
|
|
/* did any real errors happen ? */
|
|
if ((adp->device->channel->status & ATA_S_ERROR) ||
|
|
(request->flags & ADR_F_DMA_USED && dma_stat & ATA_BMSTAT_ERROR)) {
|
|
adp->device->channel->error =
|
|
ATA_INB(adp->device->channel->r_io, ATA_ERROR);
|
|
diskerr(request->bp, (adp->device->channel->error & ATA_E_ICRC) ?
|
|
"UDMA ICRC error" : "hard error",
|
|
request->blockaddr + (request->donecount / DEV_BSIZE),
|
|
&adp->disk.d_label);
|
|
|
|
/* if this is a UDMA CRC error, reinject request */
|
|
if (request->flags & ADR_F_DMA_USED &&
|
|
adp->device->channel->error & ATA_E_ICRC) {
|
|
untimeout((timeout_t *)ad_timeout, request,request->timeout_handle);
|
|
ad_invalidatequeue(adp, request);
|
|
|
|
if (request->retries++ < AD_MAX_RETRIES)
|
|
printf(" retrying\n");
|
|
else {
|
|
ata_dmainit(adp->device->channel, adp->device->unit,
|
|
ata_pmode(adp->device->param), -1, -1);
|
|
printf(" falling back to PIO mode\n");
|
|
}
|
|
TAILQ_INSERT_HEAD(&adp->device->channel->ata_queue, request, chain);
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
|
|
/* if using DMA, try once again in PIO mode */
|
|
if (request->flags & ADR_F_DMA_USED) {
|
|
untimeout((timeout_t *)ad_timeout, request,request->timeout_handle);
|
|
ad_invalidatequeue(adp, request);
|
|
ata_dmainit(adp->device->channel, adp->device->unit,
|
|
ata_pmode(adp->device->param), -1, -1);
|
|
request->flags |= ADR_F_FORCE_PIO;
|
|
TAILQ_INSERT_HEAD(&adp->device->channel->ata_queue, request, chain);
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
|
|
request->flags |= ADR_F_ERROR;
|
|
printf(" status=%02x error=%02x\n",
|
|
adp->device->channel->status, adp->device->channel->error);
|
|
}
|
|
|
|
/* if we arrived here with forced PIO mode, DMA doesn't work right */
|
|
if (request->flags & ADR_F_FORCE_PIO)
|
|
ata_prtdev(adp->device, "DMA problem fallback to PIO mode\n");
|
|
|
|
/* if this was a PIO read operation, get the data */
|
|
if (!(request->flags & ADR_F_DMA_USED) &&
|
|
(request->flags & (ADR_F_READ | ADR_F_ERROR)) == ADR_F_READ) {
|
|
|
|
/* ready to receive data? */
|
|
if ((adp->device->channel->status & (ATA_S_READY|ATA_S_DSC|ATA_S_DRQ))
|
|
!= (ATA_S_READY|ATA_S_DSC|ATA_S_DRQ))
|
|
ata_prtdev(adp->device, "read interrupt arrived early");
|
|
|
|
if (ata_wait(adp->device, (ATA_S_READY | ATA_S_DSC | ATA_S_DRQ)) != 0) {
|
|
ata_prtdev(adp->device, "read error detected (too) late");
|
|
request->flags |= ADR_F_ERROR;
|
|
}
|
|
else {
|
|
/* data ready, read in */
|
|
if (adp->device->channel->flags & ATA_USE_16BIT)
|
|
ATA_INSW(adp->device->channel->r_io, ATA_DATA,
|
|
(void*)((uintptr_t)request->data + request->donecount),
|
|
request->currentsize / sizeof(int16_t));
|
|
else
|
|
ATA_INSL(adp->device->channel->r_io, ATA_DATA,
|
|
(void*)((uintptr_t)request->data + request->donecount),
|
|
request->currentsize / sizeof(int32_t));
|
|
}
|
|
}
|
|
|
|
/* finish up transfer */
|
|
if (request->flags & ADR_F_ERROR) {
|
|
request->bp->bio_error = EIO;
|
|
request->bp->bio_flags |= BIO_ERROR;
|
|
}
|
|
else {
|
|
request->bytecount -= request->currentsize;
|
|
request->donecount += request->currentsize;
|
|
if (request->bytecount > 0) {
|
|
ad_transfer(request);
|
|
return ATA_OP_CONTINUES;
|
|
}
|
|
}
|
|
|
|
/* disarm timeout for this transfer */
|
|
untimeout((timeout_t *)ad_timeout, request, request->timeout_handle);
|
|
|
|
request->bp->bio_resid = request->bytecount;
|
|
|
|
#ifdef ATA_FLUSHCACHE_ON
|
|
if (request->bp->bio_flags & BIO_ORDERED) {
|
|
request->flags |= ADR_F_FLUSHCACHE;
|
|
if (ata_command(adp->device, ATA_C_FLUSHCACHE, 0, 0, 0, ATA_IMMEDIATE))
|
|
ata_prtdev(adp->device, "flushing cache failed\n");
|
|
else
|
|
return ATA_OP_CONTINUES;
|
|
}
|
|
finish:
|
|
#endif
|
|
biofinish(request->bp, &adp->stats, 0);
|
|
ad_free(request);
|
|
adp->outstanding--;
|
|
|
|
/* check for SERVICE (tagged operations only) */
|
|
return ad_service(adp, 1);
|
|
}
|
|
|
|
int
|
|
ad_service(struct ad_softc *adp, int change)
|
|
{
|
|
/* do we have to check the other device on this channel ? */
|
|
if (adp->device->channel->flags & ATA_QUEUED && change) {
|
|
int device = adp->device->unit;
|
|
|
|
if (adp->device->unit == ATA_MASTER) {
|
|
if (adp->device->channel->devices & ATA_ATA_SLAVE &&
|
|
((struct ad_softc *)
|
|
(adp->device->channel->
|
|
device[ATA_DEV(ATA_SLAVE)].driver))->flags&AD_F_TAG_ENABLED)
|
|
device = ATA_SLAVE;
|
|
}
|
|
else {
|
|
if (adp->device->channel->devices & ATA_ATA_MASTER &&
|
|
((struct ad_softc *)
|
|
(adp->device->channel->
|
|
device[ATA_DEV(ATA_MASTER)].driver))->flags&AD_F_TAG_ENABLED)
|
|
device = ATA_MASTER;
|
|
}
|
|
if (device != adp->device->unit &&
|
|
((struct ad_softc *)
|
|
(adp->device->channel->
|
|
device[ATA_DEV(device)].driver))->outstanding > 0) {
|
|
ATA_OUTB(adp->device->channel->r_io, ATA_DRIVE, ATA_D_IBM | device);
|
|
adp = adp->device->channel->device[ATA_DEV(device)].driver;
|
|
DELAY(1);
|
|
}
|
|
}
|
|
adp->device->channel->status =
|
|
ATA_INB(adp->device->channel->r_altio, ATA_ALTSTAT);
|
|
|
|
/* do we have a SERVICE request from the drive ? */
|
|
if (adp->flags & AD_F_TAG_ENABLED &&
|
|
adp->outstanding > 0 &&
|
|
adp->device->channel->status & ATA_S_SERVICE) {
|
|
struct ad_request *request;
|
|
int tag;
|
|
|
|
/* check for error */
|
|
if (adp->device->channel->status & ATA_S_ERROR) {
|
|
ata_prtdev(adp->device, "Oops! controller says s=0x%02x e=0x%02x\n",
|
|
adp->device->channel->status,
|
|
adp->device->channel->error);
|
|
ad_invalidatequeue(adp, NULL);
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
|
|
/* issue SERVICE cmd */
|
|
if (ata_command(adp->device, ATA_C_SERVICE, 0, 0, 0, ATA_IMMEDIATE)) {
|
|
ata_prtdev(adp->device, "problem executing SERVICE cmd\n");
|
|
ad_invalidatequeue(adp, NULL);
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
|
|
/* setup the transfer environment when ready */
|
|
if (ata_wait(adp->device, ATA_S_READY)) {
|
|
ata_prtdev(adp->device, "SERVICE timeout tag=%d s=%02x e=%02x\n",
|
|
ATA_INB(adp->device->channel->r_io, ATA_COUNT) >> 3,
|
|
adp->device->channel->status,
|
|
adp->device->channel->error);
|
|
ad_invalidatequeue(adp, NULL);
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
tag = ATA_INB(adp->device->channel->r_io, ATA_COUNT) >> 3;
|
|
if (!(request = adp->tags[tag])) {
|
|
ata_prtdev(adp->device, "no request for tag=%d\n", tag);
|
|
ad_invalidatequeue(adp, NULL);
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
adp->device->channel->active = ATA_ACTIVE_ATA;
|
|
adp->device->channel->running = request;
|
|
request->serv++;
|
|
|
|
/* start DMA transfer when ready */
|
|
if (ata_wait(adp->device, ATA_S_READY | ATA_S_DRQ)) {
|
|
ata_prtdev(adp->device, "timeout starting DMA s=%02x e=%02x\n",
|
|
adp->device->channel->status,
|
|
adp->device->channel->error);
|
|
ad_invalidatequeue(adp, NULL);
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
ata_dmastart(adp->device->channel, adp->device->unit,
|
|
request->dmatab, request->flags & ADR_F_READ);
|
|
return ATA_OP_CONTINUES;
|
|
}
|
|
return ATA_OP_FINISHED;
|
|
}
|
|
|
|
static void
|
|
ad_free(struct ad_request *request)
|
|
{
|
|
int s = splbio();
|
|
|
|
if (request->dmatab)
|
|
free(request->dmatab, M_DEVBUF);
|
|
request->softc->tags[request->tag] = NULL;
|
|
free(request, M_AD);
|
|
|
|
splx(s);
|
|
}
|
|
|
|
static void
|
|
ad_invalidatequeue(struct ad_softc *adp, struct ad_request *request)
|
|
{
|
|
/* if tags used invalidate all other tagged transfers */
|
|
if (adp->flags & AD_F_TAG_ENABLED) {
|
|
struct ad_request *tmpreq;
|
|
int tag;
|
|
|
|
ata_prtdev(adp->device, "invalidating queued requests\n");
|
|
for (tag = 0; tag <= adp->num_tags; tag++) {
|
|
tmpreq = adp->tags[tag];
|
|
adp->tags[tag] = NULL;
|
|
if (tmpreq == request || tmpreq == NULL)
|
|
continue;
|
|
untimeout((timeout_t *)ad_timeout, tmpreq, tmpreq->timeout_handle);
|
|
TAILQ_INSERT_HEAD(&adp->device->channel->ata_queue, tmpreq, chain);
|
|
}
|
|
if (ata_command(adp->device, ATA_C_NOP,
|
|
0, 0, ATA_C_F_FLUSHQUEUE, ATA_WAIT_READY))
|
|
ata_prtdev(adp->device, "flush queue failed\n");
|
|
adp->outstanding = 0;
|
|
}
|
|
}
|
|
|
|
static int
|
|
ad_tagsupported(struct ad_softc *adp)
|
|
{
|
|
const char *good[] = {"IBM-DPTA", "IBM-DTLA", NULL};
|
|
int i = 0;
|
|
|
|
switch (adp->device->channel->chiptype) {
|
|
case 0x4d33105a: /* Promises before TX2 doesn't work with tagged queuing */
|
|
case 0x4d38105a:
|
|
case 0x0d30105a:
|
|
case 0x4d30105a:
|
|
return 0;
|
|
}
|
|
|
|
/* check that drive does DMA, has tags enabled, and is one we know works */
|
|
if (adp->device->mode >= ATA_DMA && adp->device->param->support.queued &&
|
|
adp->device->param->enabled.queued) {
|
|
while (good[i] != NULL) {
|
|
if (!strncmp(adp->device->param->model, good[i], strlen(good[i])))
|
|
return 1;
|
|
i++;
|
|
}
|
|
/*
|
|
* check IBM's new obscure way of naming drives
|
|
* we want "IC" (IBM CORP) and "AT" or "AV" (ATA interface)
|
|
* but doesn't care about the other info (size, capacity etc)
|
|
*/
|
|
if (!strncmp(adp->device->param->model, "IC", 2) &&
|
|
(!strncmp(adp->device->param->model + 8, "AT", 2) ||
|
|
!strncmp(adp->device->param->model + 8, "AV", 2)))
|
|
return 1;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
ad_timeout(struct ad_request *request)
|
|
{
|
|
struct ad_softc *adp = request->softc;
|
|
int s = splbio();
|
|
|
|
adp->device->channel->running = NULL;
|
|
ata_prtdev(adp->device, "%s command timeout tag=%d serv=%d - resetting\n",
|
|
(request->flags & ADR_F_READ) ? "READ" : "WRITE",
|
|
request->tag, request->serv);
|
|
|
|
if (request->flags & ADR_F_DMA_USED) {
|
|
ata_dmadone(adp->device->channel);
|
|
ad_invalidatequeue(adp, request);
|
|
if (request->retries == AD_MAX_RETRIES) {
|
|
ata_dmainit(adp->device->channel, adp->device->unit,
|
|
ata_pmode(adp->device->param), -1, -1);
|
|
ata_prtdev(adp->device, "trying fallback to PIO mode\n");
|
|
request->retries = 0;
|
|
}
|
|
}
|
|
|
|
/* if retries still permit, reinject this request */
|
|
if (request->retries++ < AD_MAX_RETRIES) {
|
|
TAILQ_INSERT_HEAD(&adp->device->channel->ata_queue, request, chain);
|
|
}
|
|
else {
|
|
/* retries all used up, return error */
|
|
request->bp->bio_error = EIO;
|
|
request->bp->bio_flags |= BIO_ERROR;
|
|
biofinish(request->bp, &adp->stats, 0);
|
|
ad_free(request);
|
|
}
|
|
ata_reinit(adp->device->channel);
|
|
splx(s);
|
|
}
|
|
|
|
void
|
|
ad_reinit(struct ata_device *atadev)
|
|
{
|
|
struct ad_softc *adp = atadev->driver;
|
|
|
|
/* reinit disk parameters */
|
|
ad_invalidatequeue(atadev->driver, NULL);
|
|
ata_command(atadev, ATA_C_SET_MULTI, 0,
|
|
adp->transfersize / DEV_BSIZE, 0, ATA_WAIT_INTR);
|
|
if (adp->device->mode >= ATA_DMA)
|
|
ata_dmainit(atadev->channel, atadev->unit,
|
|
ata_pmode(adp->device->param),
|
|
ata_wmode(adp->device->param),
|
|
ata_umode(adp->device->param));
|
|
else
|
|
ata_dmainit(atadev->channel, atadev->unit,
|
|
ata_pmode(adp->device->param), -1, -1);
|
|
}
|
|
|
|
void
|
|
ad_print(struct ad_softc *adp, char *prepend)
|
|
{
|
|
if (prepend) printf("%s", prepend);
|
|
if (bootverbose) {
|
|
ata_prtdev(adp->device, "<%.40s/%.8s> ATA-%d disk at ata%d-%s\n",
|
|
adp->device->param->model, adp->device->param->revision,
|
|
ad_version(adp->device->param->version_major),
|
|
device_get_unit(adp->device->channel->dev),
|
|
(adp->device->unit == ATA_MASTER) ? "master" : "slave");
|
|
|
|
if (prepend) printf("%s", prepend);
|
|
ata_prtdev(adp->device,
|
|
"%lluMB (%llu sectors), %llu C, %u H, %u S, %u B\n",
|
|
(unsigned long long)(adp->total_secs /
|
|
((1024L*1024L)/DEV_BSIZE)),
|
|
(unsigned long long) adp->total_secs,
|
|
(unsigned long long) (adp->total_secs /
|
|
(adp->heads * adp->sectors)),
|
|
adp->heads, adp->sectors, DEV_BSIZE);
|
|
|
|
if (prepend) printf("%s", prepend);
|
|
ata_prtdev(adp->device, "%d secs/int, %d depth queue, %s%s\n",
|
|
adp->transfersize / DEV_BSIZE, adp->num_tags + 1,
|
|
(adp->flags & AD_F_TAG_ENABLED) ? "tagged " : "",
|
|
ata_mode2str(adp->device->mode));
|
|
|
|
if (prepend) printf("%s", prepend);
|
|
ata_prtdev(adp->device, "piomode=%d dmamode=%d udmamode=%d cblid=%d\n",
|
|
ata_pmode(adp->device->param), ata_wmode(adp->device->param),
|
|
ata_umode(adp->device->param),
|
|
adp->device->param->hwres_cblid);
|
|
|
|
}
|
|
else
|
|
ata_prtdev(adp->device,"%lluMB <%.40s> [%lld/%d/%d] at ata%d-%s %s%s\n",
|
|
(unsigned long long)(adp->total_secs /
|
|
((1024L * 1024L) / DEV_BSIZE)),
|
|
adp->device->param->model,
|
|
(unsigned long long)(adp->total_secs /
|
|
(adp->heads*adp->sectors)),
|
|
adp->heads, adp->sectors,
|
|
device_get_unit(adp->device->channel->dev),
|
|
(adp->device->unit == ATA_MASTER) ? "master" : "slave",
|
|
(adp->flags & AD_F_TAG_ENABLED) ? "tagged " : "",
|
|
ata_mode2str(adp->device->mode));
|
|
}
|
|
|
|
static int
|
|
ad_version(u_int16_t version)
|
|
{
|
|
int bit;
|
|
|
|
if (version == 0xffff)
|
|
return 0;
|
|
for (bit = 15; bit >= 0; bit--)
|
|
if (version & (1<<bit))
|
|
return bit;
|
|
return 0;
|
|
}
|