adrian ca3bfcb001 Add in an initial WB225 (AR9485 + AR3012 BT) combo profile. ...

This hasn't yet been tested as unfortunately the AR3012 I have doesn't
have the "real" firmware on it; it shipped with the cut down HCI firmware
that only understands enough to accept a new firmware image.

* Linux ath9k (GPIO constants)

2013-06-14 08:18:17 +00:00

..

ath_dfs/null

Add a method to explicitly disable radar reporting if required.

2013-01-02 01:36:10 +00:00

ath_hal

Set the antenna "config group" field.

2013-06-12 15:18:10 +00:00

ath_rate

I give up - just throw the EWMA update into the normal update_stats()

2013-02-27 04:33:06 +00:00

ah_osdep.c

Fix the HAL debugging to only use one bit to mark a message as unmaskable.

2012-07-01 02:34:32 +00:00

ah_osdep.h

Migrate the ath_hal_filltxdesc() API to take a list of buffer/seglen values.

2012-08-05 10:12:27 +00:00

if_ath_ahb.c

Create a new TX lock specifically for queuing frames.

2013-02-07 07:50:16 +00:00

if_ath_alq.c

Support sending ATH_ALQ messages with no payload.

2013-05-13 21:17:27 +00:00

if_ath_alq.h

Add ALQ beacon debugging.

2013-05-13 21:18:00 +00:00

if_ath_beacon.c

Be (very) careful about how to add more TX DMA work.

2013-05-18 18:27:53 +00:00

if_ath_beacon.h

Overhaul the TXQ locking (again!) as part of some beacon/cabq timing

2013-03-24 00:03:12 +00:00

if_ath_btcoex.c

Add in an initial WB225 (AR9485 + AR3012 BT) combo profile.

2013-06-14 08:18:17 +00:00

if_ath_btcoex.h

Bring over the initial static bluetooth coexistence configuration

2013-06-07 09:02:02 +00:00

if_ath_debug.c

TX EDMA debugging fixes:

2012-11-05 07:08:45 +00:00

if_ath_debug.h

Migrate the LNA mixing diversity machinery from the AR9285 HAL to the driver.

2013-06-12 14:52:57 +00:00

if_ath_keycache.c

Don't allocate or program a key for the AR5210.

2012-11-19 23:54:05 +00:00

if_ath_keycache.h

Add a 'vap' to ath_keyset().

2011-11-08 19:25:52 +00:00

if_ath_led.c

Bring over the initial 802.11n bluetooth coexistence support code.

2012-06-26 22:16:53 +00:00

if_ath_led.h

Refactor out the software LED config code into a common function, called

2011-12-26 05:46:22 +00:00

if_ath_lna_div.c

Initial AR9485/AR933x 1x1 LNA diversity work.

2013-06-14 03:42:10 +00:00

if_ath_lna_div.h

Initial AR9485/AR933x 1x1 LNA diversity work.

2013-06-14 03:42:10 +00:00

if_ath_misc.h

Migrate ath(4) to now use if_transmit instead of the legacy if_start

2013-05-26 22:23:39 +00:00

if_ath_pci.c

Create a new TX lock specifically for queuing frames.

2013-02-07 07:50:16 +00:00

if_ath_rx_edma.c

Use a per-RX-queue deferred list, rather than a single deferred list for

2013-04-16 20:21:02 +00:00

if_ath_rx_edma.h

Begin abstracting out the RX path in preparation for RX EDMA support.

2012-07-03 06:59:12 +00:00

if_ath_rx.c

Migrate the LNA mixing diversity machinery from the AR9285 HAL to the driver.

2013-06-12 14:52:57 +00:00

if_ath_rx.h

Fix the busdma logic to work with EDMA chipsets when using bounce

2013-04-04 08:21:56 +00:00

if_ath_spectral.c

Fix format size.

2013-01-08 22:42:15 +00:00

if_ath_spectral.h

Add a new (skeleton) spectral mode manager module.

2013-01-02 03:59:02 +00:00

if_ath_sysctl.c

Implement a separate hardware queue threshold for aggregate and non-aggr

2013-05-21 18:13:57 +00:00

if_ath_sysctl.h

Break out most of the HAL related tweaks into a per-HAL instance,

2011-06-23 02:38:36 +00:00

if_ath_tdma.c

Enable the use of TDMA on an 802.11n channel (with aggregation disabled,

2013-05-21 18:02:54 +00:00

if_ath_tdma.h

Migrate the TDMA management functions out of if_ath.c into if_ath_tdma.c.

2012-05-20 02:49:42 +00:00

if_ath_tsf.h

Migrate the bulk of the RX routines out from if_ath.c to if_ath_rx.[ch].

2012-05-20 02:05:10 +00:00

if_ath_tx_edma.c

Make sure the holding descriptor and link pointer are both freed during

2013-05-10 10:06:45 +00:00

if_ath_tx_edma.h

Begin separating out the TX DMA setup in preparation for TX EDMA support.

2012-07-23 03:52:18 +00:00

if_ath_tx_ht.c

Implement my first cut at "correct" node power-save and

2013-05-15 18:33:05 +00:00

if_ath_tx_ht.h

Implement my first cut at "correct" node power-save and

2013-05-15 18:33:05 +00:00

if_ath_tx.c

Shuffle around the cleanup unpause calls a bit.

2013-05-29 01:40:13 +00:00

if_ath_tx.h

Implement a separate hardware queue threshold for aggregate and non-aggr

2013-05-21 18:13:57 +00:00

if_ath.c

Migrate the LNA mixing diversity machinery from the AR9285 HAL to the driver.

2013-06-12 14:52:57 +00:00

if_athdfs.h

Add a method to explicitly disable radar reporting if required.

2013-01-02 01:36:10 +00:00

if_athioctl.h

Implement my first cut at "correct" node power-save and

2013-05-15 18:33:05 +00:00

if_athrate.h

Update the rate series setup code to use the decisions already made in

2013-04-17 07:21:30 +00:00

if_athvar.h

Migrate the LNA mixing diversity machinery from the AR9285 HAL to the driver.

2013-06-12 14:52:57 +00:00