freebsd-skq/sys/kern/subr_boot.c
Warner Losh 2834e42cda When parsing command line stuff, treat tabs and spaces the same.
When creating complex config files, people like to use tabs to offset
sections. Treat them the same as spaces for delimiters.
2019-04-18 22:52:12 +00:00

224 lines
5.8 KiB
C

/*-
* SPDX-License-Identifier: BSD-2-Clause-FreeBSD
*
* Copyright (c) 1998 Michael Smith <msmith@freebsd.org>
* All Rights Reserved.
* Copyright (c) 1998 Robert Nordier
* All Rights Reserved.
* Copyright (c) 2009, Oleksandr Tymoshenko <gonzo@FreeBSD.org>
* All rights reserved.
* Copyright (c) 2014 Roger Pau Monné <roger.pau@citrix.com>
* All Rights Reserved.
* Copyright (c) 2018 Kyle Evans <kevans@FreeBSD.org>
* Copyright (c) 2018 Netflix, Inc.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer
* in this position and unchanged.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/* Note: This is compiled in both the kernel and boot loader contexts */
#include <sys/param.h>
#ifdef _KERNEL
#include <sys/systm.h>
#else
#include <stand.h>
#endif
#include <sys/reboot.h>
#include <sys/boot.h>
#ifdef _KERNEL
#define SETENV(k, v) kern_setenv(k, v)
#define GETENV(k) kern_getenv(k)
#define FREE(v) freeenv(v)
#else /* Boot loader */
#define SETENV(k, v) setenv(k, v, 1)
#define GETENV(k) getenv(k)
#define FREE(v)
#endif
static struct
{
const char *ev;
int mask;
} howto_names[] = {
{ "boot_askname", RB_ASKNAME},
{ "boot_cdrom", RB_CDROM},
{ "boot_ddb", RB_KDB},
{ "boot_dfltroot", RB_DFLTROOT},
{ "boot_gdb", RB_GDB},
{ "boot_multicons", RB_MULTIPLE},
{ "boot_mute", RB_MUTE},
{ "boot_pause", RB_PAUSE},
{ "boot_serial", RB_SERIAL},
{ "boot_single", RB_SINGLE},
{ "boot_verbose", RB_VERBOSE},
{ NULL, 0}
};
/*
* In the boot environment, we often parse a command line and have to throw away
* its contents. As we do so, we set environment variables that correspond to
* the flags we encounter. Later, to get a howto mask, we grovel through these
* to reconstruct it. This also allows users in their loader.conf to set them
* and have the kernel see them.
*/
/**
* @brief convert the env vars in howto_names into a howto mask
*/
int
boot_env_to_howto(void)
{
int i, howto;
char *val;
for (howto = 0, i = 0; howto_names[i].ev != NULL; i++) {
val = GETENV(howto_names[i].ev);
if (val != NULL && strcasecmp(val, "no") != 0)
howto |= howto_names[i].mask;
FREE(val);
}
return (howto);
}
/**
* @brief Set env vars from howto_names based on howto passed in
*/
void
boot_howto_to_env(int howto)
{
int i;
for (i = 0; howto_names[i].ev != NULL; i++)
if (howto & howto_names[i].mask)
SETENV(howto_names[i].ev, "YES");
}
/**
* @brief Helper routine to parse a single arg and return its mask
*
* Parse all the - options to create a mask (or a serial speed in the
* case of -S). If the arg doesn't start with '-' assume it's an env
* variable and set that instead.
*/
int
boot_parse_arg(char *v)
{
char *n;
int howto;
#if 0
/* Need to see if this is better or worse than the meat of the #else */
static const char howto_switches[] = "aCdrgDmphsv";
static int howto_masks[] = {
RB_ASKNAME, RB_CDROM, RB_KDB, RB_DFLTROOT, RB_GDB, RB_MULTIPLE,
RB_MUTE, RB_PAUSE, RB_SERIAL, RB_SINGLE, RB_VERBOSE
};
opts = strchr(kargs, '-');
while (opts != NULL) {
while (*(++opts) != '\0') {
sw = strchr(howto_switches, *opts);
if (sw == NULL)
break;
howto |= howto_masks[sw - howto_switches];
}
opts = strchr(opts, '-');
}
#else
howto = 0;
if (*v == '-') {
while (*v != '\0') {
v++;
switch (*v) {
case 'a': howto |= RB_ASKNAME; break;
case 'C': howto |= RB_CDROM; break;
case 'd': howto |= RB_KDB; break;
case 'D': howto |= RB_MULTIPLE; break;
case 'm': howto |= RB_MUTE; break;
case 'g': howto |= RB_GDB; break;
case 'h': howto |= RB_SERIAL; break;
case 'p': howto |= RB_PAUSE; break;
case 'P': howto |= RB_PROBE; break;
case 'r': howto |= RB_DFLTROOT; break;
case 's': howto |= RB_SINGLE; break;
case 'S': SETENV("comconsole_speed", v + 1); v += strlen(v); break;
case 'v': howto |= RB_VERBOSE; break;
}
}
} else {
n = strsep(&v, "=");
if (v == NULL)
SETENV(n, "1");
else
SETENV(n, v);
}
#endif
return (howto);
}
/**
* @brief breakup the command line into args, and pass to boot_parse_arg
*/
int
boot_parse_cmdline_delim(char *cmdline, const char *delim)
{
char *v;
int howto;
howto = 0;
while ((v = strsep(&cmdline, delim)) != NULL) {
if (*v == '\0')
continue;
howto |= boot_parse_arg(v);
}
return (howto);
}
/**
* @brief Simplified interface for common 'space or tab separated' args
*/
int
boot_parse_cmdline(char *cmdline)
{
return (boot_parse_cmdline_delim(cmdline, " \t\n"));
}
/**
* @brief Pass a vector of strings to boot_parse_arg
*/
int
boot_parse_args(int argc, char *argv[])
{
int i, howto;
howto = 0;
for (i = 1; i < argc; i++)
howto |= boot_parse_arg(argv[i]);
return (howto);
}