56248d9da8
make use of it where possible. This primarily brings in support for newer hardware, and FreeBSD is not yet able to support the abundance of IRQs on new hardware and many features in the Ethernet driver. Because of the changes to IRQs in the Simple Executive, we have to maintain our own list of Octeon IRQs now, which probably can be pared-down and be specific to the CIU interrupt unit soon, and when other interrupt mechanisms are added they can maintain their own definitions. Remove unmasking of interrupts from within the UART device now that the function used is no longer present in the Simple Executive. The unmasking seems to have been gratuitous as this is more properly handled by the buses above the UART device, and seems to work on that basis.
358 lines
12 KiB
C
358 lines
12 KiB
C
/***********************license start***************
|
|
* Copyright (c) 2003-2010 Cavium Inc. (support@cavium.com). All rights
|
|
* reserved.
|
|
*
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions are
|
|
* met:
|
|
*
|
|
* * Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
*
|
|
* * Redistributions in binary form must reproduce the above
|
|
* copyright notice, this list of conditions and the following
|
|
* disclaimer in the documentation and/or other materials provided
|
|
* with the distribution.
|
|
|
|
* * Neither the name of Cavium Inc. nor the names of
|
|
* its contributors may be used to endorse or promote products
|
|
* derived from this software without specific prior written
|
|
* permission.
|
|
|
|
* This Software, including technical data, may be subject to U.S. export control
|
|
* laws, including the U.S. Export Administration Act and its associated
|
|
* regulations, and may be subject to export or import regulations in other
|
|
* countries.
|
|
|
|
* TO THE MAXIMUM EXTENT PERMITTED BY LAW, THE SOFTWARE IS PROVIDED "AS IS"
|
|
* AND WITH ALL FAULTS AND CAVIUM INC. MAKES NO PROMISES, REPRESENTATIONS OR
|
|
* WARRANTIES, EITHER EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, WITH RESPECT TO
|
|
* THE SOFTWARE, INCLUDING ITS CONDITION, ITS CONFORMITY TO ANY REPRESENTATION OR
|
|
* DESCRIPTION, OR THE EXISTENCE OF ANY LATENT OR PATENT DEFECTS, AND CAVIUM
|
|
* SPECIFICALLY DISCLAIMS ALL IMPLIED (IF ANY) WARRANTIES OF TITLE,
|
|
* MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR A PARTICULAR PURPOSE, LACK OF
|
|
* VIRUSES, ACCURACY OR COMPLETENESS, QUIET ENJOYMENT, QUIET POSSESSION OR
|
|
* CORRESPONDENCE TO DESCRIPTION. THE ENTIRE RISK ARISING OUT OF USE OR
|
|
* PERFORMANCE OF THE SOFTWARE LIES WITH YOU.
|
|
***********************license end**************************************/
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
/**
|
|
* @file
|
|
*
|
|
* Functions for SRIO initialization, configuration,
|
|
* and monitoring.
|
|
*
|
|
* <hr>$Revision: 41586 $<hr>
|
|
*/
|
|
#ifdef CVMX_BUILD_FOR_LINUX_KERNEL
|
|
#include <asm/octeon/cvmx.h>
|
|
#include <asm/octeon/cvmx-config.h>
|
|
#include <asm/octeon/cvmx-clock.h>
|
|
#include <asm/octeon/cvmx-helper.h>
|
|
#include <asm/octeon/cvmx-qlm.h>
|
|
#include <asm/octeon/cvmx-srio.h>
|
|
#include <asm/octeon/cvmx-pip-defs.h>
|
|
#include <asm/octeon/cvmx-sriox-defs.h>
|
|
#include <asm/octeon/cvmx-sriomaintx-defs.h>
|
|
#include <asm/octeon/cvmx-dpi-defs.h>
|
|
#else
|
|
#if !defined(__FreeBSD__) || !defined(_KERNEL)
|
|
#include "executive-config.h"
|
|
#include "cvmx-config.h"
|
|
#ifdef CVMX_ENABLE_PKO_FUNCTIONS
|
|
|
|
#include "cvmx.h"
|
|
#include "cvmx-helper.h"
|
|
#include "cvmx-srio.h"
|
|
#endif
|
|
#include "cvmx-qlm.h"
|
|
#else
|
|
#include "cvmx.h"
|
|
#include "cvmx-helper.h"
|
|
#include "cvmx-qlm.h"
|
|
#include "cvmx-srio.h"
|
|
#endif
|
|
#endif
|
|
|
|
#ifdef CVMX_ENABLE_PKO_FUNCTIONS
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* Probe a SRIO interface and determine the number of ports
|
|
* connected to it. The SRIO interface should still be down
|
|
* after this call.
|
|
*
|
|
* @param interface Interface to probe
|
|
*
|
|
* @return Number of ports on the interface. Zero to disable.
|
|
*/
|
|
int __cvmx_helper_srio_probe(int interface)
|
|
{
|
|
cvmx_sriox_status_reg_t srio0_status_reg;
|
|
cvmx_sriox_status_reg_t srio1_status_reg;
|
|
|
|
if (!octeon_has_feature(OCTEON_FEATURE_SRIO))
|
|
return 0;
|
|
|
|
/* Read MIO_QLMX_CFG CSRs to find SRIO status. */
|
|
if (OCTEON_IS_MODEL(OCTEON_CN66XX))
|
|
{
|
|
int status = cvmx_qlm_get_status(0);
|
|
int srio_port = interface - 4;
|
|
switch(srio_port)
|
|
{
|
|
case 0: /* 1x4 lane */
|
|
if (status == 4)
|
|
return 2;
|
|
break;
|
|
case 2: /* 2x2 lane */
|
|
if (status == 5)
|
|
return 2;
|
|
break;
|
|
case 1: /* 4x1 long/short */
|
|
case 3: /* 4x1 long/short */
|
|
if (status == 6)
|
|
return 2;
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
srio0_status_reg.u64 = cvmx_read_csr(CVMX_SRIOX_STATUS_REG(0));
|
|
srio1_status_reg.u64 = cvmx_read_csr(CVMX_SRIOX_STATUS_REG(1));
|
|
if (srio0_status_reg.s.srio || srio1_status_reg.s.srio)
|
|
return 2;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* Bringup and enable SRIO interface. After this call packet
|
|
* I/O should be fully functional. This is called with IPD
|
|
* enabled but PKO disabled.
|
|
*
|
|
* @param interface Interface to bring up
|
|
*
|
|
* @return Zero on success, negative on failure
|
|
*/
|
|
int __cvmx_helper_srio_enable(int interface)
|
|
{
|
|
int num_ports = cvmx_helper_ports_on_interface(interface);
|
|
int index;
|
|
cvmx_sriomaintx_core_enables_t sriomaintx_core_enables;
|
|
cvmx_sriox_imsg_ctrl_t sriox_imsg_ctrl;
|
|
cvmx_sriox_status_reg_t srio_status_reg;
|
|
cvmx_dpi_ctl_t dpi_ctl;
|
|
int srio_port = interface - 4;
|
|
|
|
/* All SRIO ports have a cvmx_srio_rx_message_header_t header
|
|
on them that must be skipped by IPD */
|
|
for (index=0; index<num_ports; index++)
|
|
{
|
|
cvmx_pip_prt_cfgx_t port_config;
|
|
cvmx_sriox_omsg_portx_t sriox_omsg_portx;
|
|
cvmx_sriox_omsg_sp_mrx_t sriox_omsg_sp_mrx;
|
|
cvmx_sriox_omsg_fmp_mrx_t sriox_omsg_fmp_mrx;
|
|
cvmx_sriox_omsg_nmp_mrx_t sriox_omsg_nmp_mrx;
|
|
int ipd_port = cvmx_helper_get_ipd_port(interface, index);
|
|
port_config.u64 = cvmx_read_csr(CVMX_PIP_PRT_CFGX(ipd_port));
|
|
/* Only change the skip if the user hasn't already set it */
|
|
if (!port_config.s.skip)
|
|
{
|
|
port_config.s.skip = sizeof(cvmx_srio_rx_message_header_t);
|
|
cvmx_write_csr(CVMX_PIP_PRT_CFGX(ipd_port), port_config.u64);
|
|
}
|
|
|
|
/* Enable TX with PKO */
|
|
sriox_omsg_portx.u64 = cvmx_read_csr(CVMX_SRIOX_OMSG_PORTX(index, srio_port));
|
|
sriox_omsg_portx.s.port = (srio_port) * 2 + index;
|
|
sriox_omsg_portx.s.enable = 1;
|
|
cvmx_write_csr(CVMX_SRIOX_OMSG_PORTX(index, srio_port), sriox_omsg_portx.u64);
|
|
|
|
/* Allow OMSG controller to send regardless of the state of any other
|
|
controller. Allow messages to different IDs and MBOXes to go in
|
|
parallel */
|
|
sriox_omsg_sp_mrx.u64 = 0;
|
|
sriox_omsg_sp_mrx.s.xmbox_sp = 1;
|
|
sriox_omsg_sp_mrx.s.ctlr_sp = 1;
|
|
sriox_omsg_sp_mrx.s.ctlr_fmp = 1;
|
|
sriox_omsg_sp_mrx.s.ctlr_nmp = 1;
|
|
sriox_omsg_sp_mrx.s.id_sp = 1;
|
|
sriox_omsg_sp_mrx.s.id_fmp = 1;
|
|
sriox_omsg_sp_mrx.s.id_nmp = 1;
|
|
sriox_omsg_sp_mrx.s.mbox_sp = 1;
|
|
sriox_omsg_sp_mrx.s.mbox_fmp = 1;
|
|
sriox_omsg_sp_mrx.s.mbox_nmp = 1;
|
|
sriox_omsg_sp_mrx.s.all_psd = 1;
|
|
cvmx_write_csr(CVMX_SRIOX_OMSG_SP_MRX(index, srio_port), sriox_omsg_sp_mrx.u64);
|
|
|
|
/* Allow OMSG controller to send regardless of the state of any other
|
|
controller. Allow messages to different IDs and MBOXes to go in
|
|
parallel */
|
|
sriox_omsg_fmp_mrx.u64 = 0;
|
|
sriox_omsg_fmp_mrx.s.ctlr_sp = 1;
|
|
sriox_omsg_fmp_mrx.s.ctlr_fmp = 1;
|
|
sriox_omsg_fmp_mrx.s.ctlr_nmp = 1;
|
|
sriox_omsg_fmp_mrx.s.id_sp = 1;
|
|
sriox_omsg_fmp_mrx.s.id_fmp = 1;
|
|
sriox_omsg_fmp_mrx.s.id_nmp = 1;
|
|
sriox_omsg_fmp_mrx.s.mbox_sp = 1;
|
|
sriox_omsg_fmp_mrx.s.mbox_fmp = 1;
|
|
sriox_omsg_fmp_mrx.s.mbox_nmp = 1;
|
|
sriox_omsg_fmp_mrx.s.all_psd = 1;
|
|
cvmx_write_csr(CVMX_SRIOX_OMSG_FMP_MRX(index, srio_port), sriox_omsg_fmp_mrx.u64);
|
|
|
|
/* Once the first part of a message is accepted, always acept the rest
|
|
of the message */
|
|
sriox_omsg_nmp_mrx.u64 = 0;
|
|
sriox_omsg_nmp_mrx.s.all_sp = 1;
|
|
sriox_omsg_nmp_mrx.s.all_fmp = 1;
|
|
sriox_omsg_nmp_mrx.s.all_nmp = 1;
|
|
cvmx_write_csr(CVMX_SRIOX_OMSG_NMP_MRX(index, srio_port), sriox_omsg_nmp_mrx.u64);
|
|
|
|
}
|
|
|
|
/* Choose the receive controller based on the mailbox */
|
|
sriox_imsg_ctrl.u64 = cvmx_read_csr(CVMX_SRIOX_IMSG_CTRL(srio_port));
|
|
sriox_imsg_ctrl.s.prt_sel = 0;
|
|
sriox_imsg_ctrl.s.mbox = 0xa;
|
|
cvmx_write_csr(CVMX_SRIOX_IMSG_CTRL(srio_port), sriox_imsg_ctrl.u64);
|
|
|
|
/* DPI must be enabled for us to RX messages */
|
|
dpi_ctl.u64 = cvmx_read_csr(CVMX_DPI_CTL);
|
|
dpi_ctl.s.clk = 1;
|
|
dpi_ctl.s.en = 1;
|
|
cvmx_write_csr(CVMX_DPI_CTL, dpi_ctl.u64);
|
|
|
|
/* Make sure register access is allowed */
|
|
srio_status_reg.u64 = cvmx_read_csr(CVMX_SRIOX_STATUS_REG(srio_port));
|
|
if (!srio_status_reg.s.access)
|
|
return 0;
|
|
|
|
/* Enable RX */
|
|
if (!cvmx_srio_config_read32(srio_port, 0, -1, 0, 0,
|
|
CVMX_SRIOMAINTX_CORE_ENABLES(srio_port), &sriomaintx_core_enables.u32))
|
|
{
|
|
sriomaintx_core_enables.s.imsg0 = 1;
|
|
sriomaintx_core_enables.s.imsg1 = 1;
|
|
cvmx_srio_config_write32(srio_port, 0, -1, 0, 0,
|
|
CVMX_SRIOMAINTX_CORE_ENABLES(srio_port), sriomaintx_core_enables.u32);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* Return the link state of an IPD/PKO port as returned by SRIO link status.
|
|
*
|
|
* @param ipd_port IPD/PKO port to query
|
|
*
|
|
* @return Link state
|
|
*/
|
|
cvmx_helper_link_info_t __cvmx_helper_srio_link_get(int ipd_port)
|
|
{
|
|
int interface = cvmx_helper_get_interface_num(ipd_port);
|
|
int srio_port = interface - 4;
|
|
cvmx_helper_link_info_t result;
|
|
cvmx_sriox_status_reg_t srio_status_reg;
|
|
cvmx_sriomaintx_port_0_err_stat_t sriomaintx_port_0_err_stat;
|
|
cvmx_sriomaintx_port_0_ctl_t sriomaintx_port_0_ctl;
|
|
cvmx_sriomaintx_port_0_ctl2_t sriomaintx_port_0_ctl2;
|
|
|
|
result.u64 = 0;
|
|
|
|
/* Make sure register access is allowed */
|
|
srio_status_reg.u64 = cvmx_read_csr(CVMX_SRIOX_STATUS_REG(srio_port));
|
|
if (!srio_status_reg.s.access)
|
|
return result;
|
|
|
|
/* Read the port link status */
|
|
if (cvmx_srio_config_read32(srio_port, 0, -1, 0, 0,
|
|
CVMX_SRIOMAINTX_PORT_0_ERR_STAT(srio_port),
|
|
&sriomaintx_port_0_err_stat.u32))
|
|
return result;
|
|
|
|
/* Return if link is down */
|
|
if (!sriomaintx_port_0_err_stat.s.pt_ok)
|
|
return result;
|
|
|
|
/* Read the port link width and speed */
|
|
if (cvmx_srio_config_read32(srio_port, 0, -1, 0, 0,
|
|
CVMX_SRIOMAINTX_PORT_0_CTL(srio_port),
|
|
&sriomaintx_port_0_ctl.u32))
|
|
return result;
|
|
if (cvmx_srio_config_read32(srio_port, 0, -1, 0, 0,
|
|
CVMX_SRIOMAINTX_PORT_0_CTL2(srio_port),
|
|
&sriomaintx_port_0_ctl2.u32))
|
|
return result;
|
|
|
|
/* Link is up */
|
|
result.s.full_duplex = 1;
|
|
result.s.link_up = 1;
|
|
switch (sriomaintx_port_0_ctl2.s.sel_baud)
|
|
{
|
|
case 1:
|
|
result.s.speed = 1250;
|
|
break;
|
|
case 2:
|
|
result.s.speed = 2500;
|
|
break;
|
|
case 3:
|
|
result.s.speed = 3125;
|
|
break;
|
|
case 4:
|
|
result.s.speed = 5000;
|
|
break;
|
|
case 5:
|
|
result.s.speed = 6250;
|
|
break;
|
|
default:
|
|
result.s.speed = 0;
|
|
break;
|
|
}
|
|
switch (sriomaintx_port_0_ctl.s.it_width)
|
|
{
|
|
case 2: /* Four lanes */
|
|
result.s.speed += 40000;
|
|
break;
|
|
case 3: /* Two lanes */
|
|
result.s.speed += 20000;
|
|
break;
|
|
default: /* One lane */
|
|
result.s.speed += 10000;
|
|
break;
|
|
}
|
|
return result;
|
|
}
|
|
|
|
/**
|
|
* @INTERNAL
|
|
* Configure an IPD/PKO port for the specified link state. This
|
|
* function does not influence auto negotiation at the PHY level.
|
|
* The passed link state must always match the link state returned
|
|
* by cvmx_helper_link_get(). It is normally best to use
|
|
* cvmx_helper_link_autoconf() instead.
|
|
*
|
|
* @param ipd_port IPD/PKO port to configure
|
|
* @param link_info The new link state
|
|
*
|
|
* @return Zero on success, negative on failure
|
|
*/
|
|
int __cvmx_helper_srio_link_set(int ipd_port, cvmx_helper_link_info_t link_info)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
#endif /* CVMX_ENABLE_PKO_FUNCTIONS */
|
|
|