np e483b749d9 cxgbei: Hardware accelerated iSCSI target and initiator for TOE capable ... cards supported by cxgbe(4). On the host side this driver interfaces with the storage stack via the ICL (iSCSI Common Layer) in the kernel. On the wire the traffic is standard iSCSI (SCSI over TCP as per RFC 3720/7143 etc.) that interoperates with all other standards compliant implementations. The driver is layered on top of the TOE driver (t4_tom) and promotes connections being handled by t4_tom to iSCSI ULP (Upper Layer Protocol) mode. Hardware assistance in this mode includes: - Full TCP processing. - iSCSI PDU identification and recovery within the TCP stream. - Header and/or data digest insertion (tx) and verification (rx). - Zero copy (both tx and rx). Man page will follow in a separate commit in a couple of weeks. Relnotes: Yes Sponsored by: Chelsio Communications		2015-12-26 06:05:21 +00:00
..
cxgbei	cxgbei: Hardware accelerated iSCSI target and initiator for TOE capable	2015-12-26 06:05:21 +00:00
if_cxgbe	cxgbe(4): support for the kernel RSS option.	2015-10-16 01:19:55 +00:00
if_cxl	cxgbe(4): Add a minimal if_cxl module that pulls in the real driver as	2015-02-06 01:10:04 +00:00
iw_cxgbe	Finish process of moving the LinuxKPI module into the default kernel build.	2015-10-29 08:28:39 +00:00
t4_firmware	cxgbe(4): Update T5 and T4 firmwares bundled with the driver to 1.14.4.0. The	2015-08-05 19:45:11 +00:00
t5_firmware	cxgbe(4): Update T5 and T4 firmwares bundled with the driver to 1.14.4.0. The	2015-08-05 19:45:11 +00:00
tom	Move most of the 15 variations on generating opt_inet.h and	2014-08-04 22:37:02 +00:00
Makefile	cxgbei: Hardware accelerated iSCSI target and initiator for TOE capable	2015-12-26 06:05:21 +00:00