freebsd-skq/sys/dev/cm/smc90cx6.c
Maxim Sobolev e50d35e6c6 Add new tunable 'net.link.ifqmaxlen' to set default send interface
queue length. The default value for this parameter is 50, which is
quite low for many of today's uses and the only way to modify this
parameter right now is to edit if_var.h file. Also add read-only
sysctl with the same name, so that it's possible to retrieve the
current value.

MFC after:	1 month
2010-05-03 07:32:50 +00:00

927 lines
20 KiB
C

/* $NetBSD: smc90cx6.c,v 1.38 2001/07/07 15:57:53 thorpej Exp $ */
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
/*-
* Copyright (c) 1994, 1995, 1998 The NetBSD Foundation, Inc.
* All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by Ignatios Souvatzis.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* Chip core driver for the SMC90c26 / SMC90c56 (and SMC90c66 in '56
* compatibility mode) boards
*/
/* #define CMSOFTCOPY */
#define CMRETRANSMIT /**/
/* #define CM_DEBUG */
#include <sys/param.h>
#include <sys/systm.h>
#include <sys/sockio.h>
#include <sys/mbuf.h>
#include <sys/module.h>
#include <sys/kernel.h>
#include <sys/socket.h>
#include <sys/syslog.h>
#include <sys/bus.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <machine/resource.h>
#include <net/if.h>
#include <net/if_dl.h>
#include <net/if_types.h>
#include <net/if_arc.h>
#include <dev/cm/smc90cx6reg.h>
#include <dev/cm/smc90cx6var.h>
MODULE_DEPEND(if_cm, arcnet, 1, 1, 1);
/* these should be elsewhere */
#define ARC_MIN_LEN 1
#define ARC_MIN_FORBID_LEN 254
#define ARC_MAX_FORBID_LEN 256
#define ARC_MAX_LEN 508
#define ARC_ADDR_LEN 1
/* for watchdog timer. This should be more than enough. */
#define ARCTIMEOUT (5*IFNET_SLOWHZ)
devclass_t cm_devclass;
/*
* This currently uses 2 bufs for tx, 2 for rx
*
* New rx protocol:
*
* rx has a fillcount variable. If fillcount > (NRXBUF-1),
* rx can be switched off from rx hard int.
* Else rx is restarted on the other receiver.
* rx soft int counts down. if it is == (NRXBUF-1), it restarts
* the receiver.
* To ensure packet ordering (we need that for 1201 later), we have a counter
* which is incremented modulo 256 on each receive and a per buffer
* variable, which is set to the counter on filling. The soft int can
* compare both values to determine the older packet.
*
* Transmit direction:
*
* cm_start checks tx_fillcount
* case 2: return
*
* else fill tx_act ^ 1 && inc tx_fillcount
*
* check tx_fillcount again.
* case 2: set IFF_DRV_OACTIVE to stop arc_output from filling us.
* case 1: start tx
*
* tint clears IFF_OACTIVE, decrements and checks tx_fillcount
* case 1: start tx on tx_act ^ 1, softcall cm_start
* case 0: softcall cm_start
*
* #define fill(i) get mbuf && copy mbuf to chip(i)
*/
void cm_init(void *);
static void cm_init_locked(struct cm_softc *);
static void cm_reset_locked(struct cm_softc *);
void cm_start(struct ifnet *);
void cm_start_locked(struct ifnet *);
int cm_ioctl(struct ifnet *, unsigned long, caddr_t);
void cm_watchdog(void *);
void cm_srint_locked(void *vsc);
static void cm_tint_locked(struct cm_softc *, int);
void cm_reconwatch_locked(void *);
/*
* Release all resources
*/
void
cm_release_resources(dev)
device_t dev;
{
struct cm_softc *sc = device_get_softc(dev);
if (sc->port_res != NULL) {
bus_release_resource(dev, SYS_RES_IOPORT,
0, sc->port_res);
sc->port_res = NULL;
}
if (sc->mem_res != NULL) {
bus_release_resource(dev, SYS_RES_MEMORY,
0, sc->mem_res);
sc->mem_res = NULL;
}
if (sc->irq_res != NULL) {
bus_release_resource(dev, SYS_RES_IRQ,
0, sc->irq_res);
sc->irq_res = NULL;
}
}
int
cm_attach(dev)
device_t dev;
{
struct cm_softc *sc = device_get_softc(dev);
struct ifnet *ifp;
u_int8_t linkaddress;
ifp = sc->sc_ifp = if_alloc(IFT_ARCNET);
if (ifp == NULL)
return (ENOSPC);
/*
* read the arcnet address from the board
*/
GETREG(CMRESET);
do {
DELAY(200);
} while (!(GETREG(CMSTAT) & CM_POR));
linkaddress = GETMEM(CMMACOFF);
/* clear the int mask... */
sc->sc_intmask = 0;
PUTREG(CMSTAT, 0);
PUTREG(CMCMD, CM_CONF(CONF_LONG));
PUTREG(CMCMD, CM_CLR(CLR_POR|CLR_RECONFIG));
sc->sc_recontime = sc->sc_reconcount = 0;
/*
* set interface to stopped condition (reset)
*/
cm_stop_locked(sc);
ifp->if_softc = sc;
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
ifp->if_output = arc_output;
ifp->if_start = cm_start;
ifp->if_ioctl = cm_ioctl;
ifp->if_init = cm_init;
/* XXX IFQ_SET_READY(&ifp->if_snd); */
ifp->if_snd.ifq_maxlen = ifqmaxlen;
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX;
arc_ifattach(ifp, linkaddress);
#ifdef CMSOFTCOPY
sc->sc_rxcookie = softintr_establish(IPL_SOFTNET, cm_srint, sc);
sc->sc_txcookie = softintr_establish(IPL_SOFTNET,
(void (*)(void *))cm_start, ifp);
#endif
callout_init_mtx(&sc->sc_recon_ch, &sc->sc_mtx, 0);
callout_init_mtx(&sc->sc_watchdog_timer, &sc->sc_mtx, 0);
if_printf(ifp, "link addr 0x%02x (%d)\n", linkaddress, linkaddress);
return 0;
}
/*
* Initialize device
*
*/
void
cm_init(xsc)
void *xsc;
{
struct cm_softc *sc = (struct cm_softc *)xsc;
CM_LOCK(sc);
cm_init_locked(sc);
CM_UNLOCK(sc);
}
static void
cm_init_locked(struct cm_softc *sc)
{
struct ifnet *ifp = sc->sc_ifp;
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
ifp->if_drv_flags |= IFF_DRV_RUNNING;
cm_reset_locked(sc);
}
}
/*
* Reset the interface...
*
* Assumes that it is called with sc_mtx held
*/
void
cm_reset_locked(sc)
struct cm_softc *sc;
{
struct ifnet *ifp;
int linkaddress;
ifp = sc->sc_ifp;
#ifdef CM_DEBUG
if_printf(ifp, "reset\n");
#endif
/* stop and restart hardware */
GETREG(CMRESET);
do {
DELAY(200);
} while (!(GETREG(CMSTAT) & CM_POR));
linkaddress = GETMEM(CMMACOFF);
#if defined(CM_DEBUG) && (CM_DEBUG > 2)
if_printf(ifp, "reset: card reset, link addr = 0x%02x (%d)\n",
linkaddress, linkaddress);
#endif
/* tell the routing level about the (possibly changed) link address */
arc_storelladdr(ifp, linkaddress);
arc_frag_init(ifp);
/* POR is NMI, but we need it below: */
sc->sc_intmask = CM_RECON|CM_POR;
PUTREG(CMSTAT, sc->sc_intmask);
PUTREG(CMCMD, CM_CONF(CONF_LONG));
#ifdef CM_DEBUG
if_printf(ifp, "reset: chip configured, status=0x%02x\n",
GETREG(CMSTAT));
#endif
PUTREG(CMCMD, CM_CLR(CLR_POR|CLR_RECONFIG));
#ifdef CM_DEBUG
if_printf(ifp, "reset: bits cleared, status=0x%02x\n",
GETREG(CMSTAT));
#endif
sc->sc_reconcount_excessive = ARC_EXCESSIVE_RECONS;
/* start receiver */
sc->sc_intmask |= CM_RI;
sc->sc_rx_fillcount = 0;
sc->sc_rx_act = 2;
PUTREG(CMCMD, CM_RXBC(2));
PUTREG(CMSTAT, sc->sc_intmask);
#ifdef CM_DEBUG
if_printf(ifp, "reset: started receiver, status=0x%02x\n",
GETREG(CMSTAT));
#endif
/* and init transmitter status */
sc->sc_tx_act = 0;
sc->sc_tx_fillcount = 0;
ifp->if_drv_flags |= IFF_DRV_RUNNING;
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
callout_reset(&sc->sc_watchdog_timer, hz, cm_watchdog, sc);
cm_start_locked(ifp);
}
/*
* Take interface offline
*/
void
cm_stop_locked(sc)
struct cm_softc *sc;
{
/* Stop the interrupts */
PUTREG(CMSTAT, 0);
/* Stop the interface */
GETREG(CMRESET);
/* Stop watchdog timer */
callout_stop(&sc->sc_watchdog_timer);
sc->sc_timer = 0;
}
void
cm_start(struct ifnet *ifp)
{
struct cm_softc *sc = ifp->if_softc;
CM_LOCK(sc);
cm_start_locked(ifp);
CM_UNLOCK(sc);
}
/*
* Start output on interface. Get another datagram to send
* off the interface queue, and copy it to the
* interface becore starting the output
*
* Assumes that sc_mtx is held
*/
void
cm_start_locked(ifp)
struct ifnet *ifp;
{
struct cm_softc *sc = ifp->if_softc;
struct mbuf *m, *mp;
int cm_ram_ptr;
int len, tlen, offset, buffer;
#ifdef CMTIMINGS
u_long copystart, lencopy, perbyte;
#endif
#if defined(CM_DEBUG) && (CM_DEBUG > 3)
if_printf(ifp, "start(%p)\n", ifp);
#endif
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
return;
if (sc->sc_tx_fillcount >= 2)
return;
m = arc_frag_next(ifp);
buffer = sc->sc_tx_act ^ 1;
if (m == 0)
return;
#ifdef CM_DEBUG
if (m->m_len < ARC_HDRLEN)
m = m_pullup(m, ARC_HDRLEN);/* gcc does structure padding */
if_printf(ifp, "start: filling %d from %d to %d type %d\n",
buffer, mtod(m, u_char *)[0],
mtod(m, u_char *)[1], mtod(m, u_char *)[2]);
#else
if (m->m_len < 2)
m = m_pullup(m, 2);
#endif
cm_ram_ptr = buffer * 512;
if (m == 0)
return;
/* write the addresses to RAM and throw them away */
/*
* Hardware does this: Yet Another Microsecond Saved.
* (btw, timing code says usually 2 microseconds)
* PUTMEM(cm_ram_ptr + 0, mtod(m, u_char *)[0]);
*/
PUTMEM(cm_ram_ptr + 1, mtod(m, u_char *)[1]);
m_adj(m, 2);
/* get total length left at this point */
tlen = m->m_pkthdr.len;
if (tlen < ARC_MIN_FORBID_LEN) {
offset = 256 - tlen;
PUTMEM(cm_ram_ptr + 2, offset);
} else {
PUTMEM(cm_ram_ptr + 2, 0);
if (tlen <= ARC_MAX_FORBID_LEN)
offset = 255; /* !!! */
else {
if (tlen > ARC_MAX_LEN)
tlen = ARC_MAX_LEN;
offset = 512 - tlen;
}
PUTMEM(cm_ram_ptr + 3, offset);
}
cm_ram_ptr += offset;
/* lets loop through the mbuf chain */
for (mp = m; mp; mp = mp->m_next) {
if ((len = mp->m_len)) { /* YAMS */
bus_space_write_region_1(
rman_get_bustag(sc->mem_res),
rman_get_bushandle(sc->mem_res),
cm_ram_ptr, mtod(mp, caddr_t), len);
cm_ram_ptr += len;
}
}
sc->sc_broadcast[buffer] = (m->m_flags & M_BCAST) != 0;
sc->sc_retransmits[buffer] = (m->m_flags & M_BCAST) ? 1 : 5;
if (++sc->sc_tx_fillcount > 1) {
/*
* We are filled up to the rim. No more bufs for the moment,
* please.
*/
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
} else {
#ifdef CM_DEBUG
if_printf(ifp, "start: starting transmitter on buffer %d\n",
buffer);
#endif
/* Transmitter was off, start it */
sc->sc_tx_act = buffer;
/*
* We still can accept another buf, so don't:
* ifp->if_drv_flags |= IFF_DRV_OACTIVE;
*/
sc->sc_intmask |= CM_TA;
PUTREG(CMCMD, CM_TX(buffer));
PUTREG(CMSTAT, sc->sc_intmask);
sc->sc_timer = ARCTIMEOUT;
}
m_freem(m);
/*
* After 10 times reading the docs, I realized
* that in the case the receiver NAKs the buffer request,
* the hardware retries till shutdown.
* This is integrated now in the code above.
*/
}
#ifdef CMSOFTCOPY
void
cm_srint(void *vsc)
{
struct cm_softc *sc = (struct cm_softc *)vsc;
CM_LOCK(sc);
cm_srint_locked(vsc);
CM_UNLOCK(sc);
}
#endif
/*
* Arcnet interface receiver soft interrupt:
* get the stuff out of any filled buffer we find.
*/
void
cm_srint_locked(vsc)
void *vsc;
{
struct cm_softc *sc = (struct cm_softc *)vsc;
int buffer, len, offset, type;
int cm_ram_ptr;
struct mbuf *m;
struct arc_header *ah;
struct ifnet *ifp;
ifp = sc->sc_ifp;
buffer = sc->sc_rx_act ^ 1;
/* Allocate header mbuf */
MGETHDR(m, M_DONTWAIT, MT_DATA);
if (m == 0) {
/*
* in case s.th. goes wrong with mem, drop it
* to make sure the receiver can be started again
* count it as input error (we dont have any other
* detectable)
*/
ifp->if_ierrors++;
goto cleanup;
}
m->m_pkthdr.rcvif = ifp;
/*
* Align so that IP packet will be longword aligned. Here we
* assume that m_data of new packet is longword aligned.
* When implementing PHDS, we might have to change it to 2,
* (2*sizeof(ulong) - CM_HDRNEWLEN)), packet type dependent.
*/
cm_ram_ptr = buffer * 512;
offset = GETMEM(cm_ram_ptr + 2);
if (offset)
len = 256 - offset;
else {
offset = GETMEM(cm_ram_ptr + 3);
len = 512 - offset;
}
/*
* first +2 bytes for align fixup below
* second +2 bytes are for src/dst addresses
*/
if ((len + 2 + 2) > MHLEN) {
/* attach an mbuf cluster */
MCLGET(m, M_DONTWAIT);
/* Insist on getting a cluster */
if ((m->m_flags & M_EXT) == 0) {
ifp->if_ierrors++;
goto cleanup;
}
}
if (m == 0) {
ifp->if_ierrors++;
goto cleanup;
}
type = GETMEM(cm_ram_ptr + offset);
m->m_data += 1 + arc_isphds(type);
/* mbuf filled with ARCnet addresses */
m->m_pkthdr.len = m->m_len = len + 2;
ah = mtod(m, struct arc_header *);
ah->arc_shost = GETMEM(cm_ram_ptr + 0);
ah->arc_dhost = GETMEM(cm_ram_ptr + 1);
bus_space_read_region_1(
rman_get_bustag(sc->mem_res), rman_get_bushandle(sc->mem_res),
cm_ram_ptr + offset, mtod(m, u_char *) + 2, len);
CM_UNLOCK(sc);
arc_input(ifp, m);
CM_LOCK(sc);
m = NULL;
ifp->if_ipackets++;
cleanup:
if (m != NULL)
m_freem(m);
/* mark buffer as invalid by source id 0 */
PUTMEM(buffer << 9, 0);
if (--sc->sc_rx_fillcount == 2 - 1) {
/* was off, restart it on buffer just emptied */
sc->sc_rx_act = buffer;
sc->sc_intmask |= CM_RI;
/* this also clears the RI flag interrupt: */
PUTREG(CMCMD, CM_RXBC(buffer));
PUTREG(CMSTAT, sc->sc_intmask);
#ifdef CM_DEBUG
if_printf(ifp, "srint: restarted rx on buf %d\n", buffer);
#endif
}
}
__inline static void
cm_tint_locked(sc, isr)
struct cm_softc *sc;
int isr;
{
struct ifnet *ifp;
int buffer;
#ifdef CMTIMINGS
int clknow;
#endif
ifp = sc->sc_ifp;
buffer = sc->sc_tx_act;
/*
* retransmit code:
* Normal situtations first for fast path:
* If acknowledgement received ok or broadcast, we're ok.
* else if
*/
if (isr & CM_TMA || sc->sc_broadcast[buffer])
ifp->if_opackets++;
#ifdef CMRETRANSMIT
else if (ifp->if_flags & IFF_LINK2 && sc->sc_timer > 0
&& --sc->sc_retransmits[buffer] > 0) {
/* retransmit same buffer */
PUTREG(CMCMD, CM_TX(buffer));
return;
}
#endif
else
ifp->if_oerrors++;
/* We know we can accept another buffer at this point. */
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
if (--sc->sc_tx_fillcount > 0) {
/*
* start tx on other buffer.
* This also clears the int flag
*/
buffer ^= 1;
sc->sc_tx_act = buffer;
/*
* already given:
* sc->sc_intmask |= CM_TA;
* PUTREG(CMSTAT, sc->sc_intmask);
*/
PUTREG(CMCMD, CM_TX(buffer));
/* init watchdog timer */
sc->sc_timer = ARCTIMEOUT;
#if defined(CM_DEBUG) && (CM_DEBUG > 1)
if_printf(ifp,
"tint: starting tx on buffer %d, status 0x%02x\n",
buffer, GETREG(CMSTAT));
#endif
} else {
/* have to disable TX interrupt */
sc->sc_intmask &= ~CM_TA;
PUTREG(CMSTAT, sc->sc_intmask);
/* ... and watchdog timer */
sc->sc_timer = 0;
#ifdef CM_DEBUG
if_printf(ifp, "tint: no more buffers to send, status 0x%02x\n",
GETREG(CMSTAT));
#endif
}
/* XXXX TODO */
#ifdef CMSOFTCOPY
/* schedule soft int to fill a new buffer for us */
softintr_schedule(sc->sc_txcookie);
#else
/* call it directly */
cm_start_locked(ifp);
#endif
}
/*
* Our interrupt routine
*/
void
cmintr(arg)
void *arg;
{
struct cm_softc *sc = arg;
struct ifnet *ifp = sc->sc_ifp;
u_char isr, maskedisr;
int buffer;
u_long newsec;
CM_LOCK(sc);
isr = GETREG(CMSTAT);
maskedisr = isr & sc->sc_intmask;
if (!maskedisr || (ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
CM_UNLOCK(sc);
return;
}
do {
#if defined(CM_DEBUG) && (CM_DEBUG > 1)
if_printf(ifp, "intr: status 0x%02x, intmask 0x%02x\n",
isr, sc->sc_intmask);
#endif
if (maskedisr & CM_POR) {
/*
* XXX We should never see this. Don't bother to store
* the address.
* sc->sc_ifp->if_l2com->ac_anaddr = GETMEM(CMMACOFF);
*/
PUTREG(CMCMD, CM_CLR(CLR_POR));
log(LOG_WARNING,
"%s: intr: got spurious power on reset int\n",
ifp->if_xname);
}
if (maskedisr & CM_RECON) {
/*
* we dont need to:
* PUTREG(CMCMD, CM_CONF(CONF_LONG));
*/
PUTREG(CMCMD, CM_CLR(CLR_RECONFIG));
ifp->if_collisions++;
/*
* If less than 2 seconds per reconfig:
* If ARC_EXCESSIVE_RECONFIGS
* since last burst, complain and set treshold for
* warnings to ARC_EXCESSIVE_RECONS_REWARN.
*
* This allows for, e.g., new stations on the cable, or
* cable switching as long as it is over after
* (normally) 16 seconds.
*
* XXX TODO: check timeout bits in status word and
* double time if necessary.
*/
callout_stop(&sc->sc_recon_ch);
newsec = time_second;
if ((newsec - sc->sc_recontime <= 2) &&
(++sc->sc_reconcount == ARC_EXCESSIVE_RECONS)) {
log(LOG_WARNING,
"%s: excessive token losses, "
"cable problem?\n",
ifp->if_xname);
}
sc->sc_recontime = newsec;
callout_reset(&sc->sc_recon_ch, 15 * hz,
cm_reconwatch_locked, (void *)sc);
}
if (maskedisr & CM_RI) {
#if defined(CM_DEBUG) && (CM_DEBUG > 1)
if_printf(ifp, "intr: hard rint, act %d\n",
sc->sc_rx_act);
#endif
buffer = sc->sc_rx_act;
/* look if buffer is marked invalid: */
if (GETMEM(buffer * 512) == 0) {
/*
* invalid marked buffer (or illegally
* configured sender)
*/
log(LOG_WARNING,
"%s: spurious RX interrupt or sender 0 "
" (ignored)\n", ifp->if_xname);
/*
* restart receiver on same buffer.
* XXX maybe better reset interface?
*/
PUTREG(CMCMD, CM_RXBC(buffer));
} else {
if (++sc->sc_rx_fillcount > 1) {
sc->sc_intmask &= ~CM_RI;
PUTREG(CMSTAT, sc->sc_intmask);
} else {
buffer ^= 1;
sc->sc_rx_act = buffer;
/*
* Start receiver on other receive
* buffer. This also clears the RI
* interrupt flag.
*/
PUTREG(CMCMD, CM_RXBC(buffer));
/* in RX intr, so mask is ok for RX */
#ifdef CM_DEBUG
if_printf(ifp, "strt rx for buf %d, "
"stat 0x%02x\n",
sc->sc_rx_act, GETREG(CMSTAT));
#endif
}
#ifdef CMSOFTCOPY
/*
* this one starts a soft int to copy out
* of the hw
*/
softintr_schedule(sc->sc_rxcookie);
#else
/* this one does the copy here */
cm_srint_locked(sc);
#endif
}
}
if (maskedisr & CM_TA) {
cm_tint_locked(sc, isr);
}
isr = GETREG(CMSTAT);
maskedisr = isr & sc->sc_intmask;
} while (maskedisr);
#if defined(CM_DEBUG) && (CM_DEBUG > 1)
if_printf(ifp, "intr (exit): status 0x%02x, intmask 0x%02x\n",
isr, sc->sc_intmask);
#endif
CM_UNLOCK(sc);
}
void
cm_reconwatch_locked(arg)
void *arg;
{
struct cm_softc *sc = arg;
struct ifnet *ifp = sc->sc_ifp;
if (sc->sc_reconcount >= ARC_EXCESSIVE_RECONS) {
sc->sc_reconcount = 0;
log(LOG_WARNING, "%s: token valid again.\n",
ifp->if_xname);
}
sc->sc_reconcount = 0;
}
/*
* Process an ioctl request.
* This code needs some work - it looks pretty ugly.
*/
int
cm_ioctl(ifp, command, data)
struct ifnet *ifp;
u_long command;
caddr_t data;
{
struct cm_softc *sc;
int error;
error = 0;
sc = ifp->if_softc;
#if defined(CM_DEBUG) && (CM_DEBUG > 2)
if_printf(ifp, "ioctl() called, cmd = 0x%lx\n", command);
#endif
switch (command) {
case SIOCSIFADDR:
case SIOCGIFADDR:
case SIOCADDMULTI:
case SIOCDELMULTI:
case SIOCSIFMTU:
error = arc_ioctl(ifp, command, data);
break;
case SIOCSIFFLAGS:
CM_LOCK(sc);
if ((ifp->if_flags & IFF_UP) == 0 &&
(ifp->if_drv_flags & IFF_DRV_RUNNING) != 0) {
/*
* If interface is marked down and it is running,
* then stop it.
*/
cm_stop_locked(sc);
ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
} else if ((ifp->if_flags & IFF_UP) != 0 &&
(ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
/*
* If interface is marked up and it is stopped, then
* start it.
*/
cm_init_locked(sc);
}
CM_UNLOCK(sc);
break;
default:
error = EINVAL;
break;
}
return (error);
}
/*
* watchdog routine for transmitter.
*
* We need this, because else a receiver whose hardware is alive, but whose
* software has not enabled the Receiver, would make our hardware wait forever
* Discovered this after 20 times reading the docs.
*
* Only thing we do is disable transmitter. We'll get a transmit timeout,
* and the int handler will have to decide not to retransmit (in case
* retransmission is implemented).
*/
void
cm_watchdog(void *arg)
{
struct cm_softc *sc;
sc = arg;
callout_reset(&sc->sc_watchdog_timer, hz, cm_watchdog, sc);
if (sc->sc_timer == 0 || --sc->sc_timer > 0)
return;
PUTREG(CMCMD, CM_TXDIS);
}