3584a5f5d1
register changes when compiled with SCHIZO_DEBUG and take advantage of them. - Add support for the XMITS Fireplane/Safari to PCI-X bridges. I tought I'd need this for a Sun Fire 3800, which then turned out to not being equipped with such a bridge though. The support for these should be complete but given that it hasn't actually been tested probing is disabled for now. This required a way to alter the XMITS configuration in case a PCI-X device is found further down the device tree so the sparc64 specific ofw_pci kobj was revived with a ofw_pci_setup_device method, which is called by the ofw_pcibus code for every device added. - A closer inspection of the OpenSolaris code indicates that consistent DMA flushing/syncing as well as the block store workaround should be applied with every BUS_DMASYNC_POSTREAD instead of in a wrapper around interrupt handlers for devices behind PCI-PCI bridges only as suggested by the documentation (code for the latter actually exists in OpenSolaris but is disabled by default), which also makes more sense. - Add a workaround for Casinni/Skyhawk combinations. Chances are that this solves the crashes seen when using the the on-board Casinni NICs of Sun Fire V480 equipped with centerplanes other than 501-6780 or 501-6790. This also takes advantage of the ofw_pci_setup_device method. - Mark some unused parameters as such.
1527 lines
46 KiB
C
1527 lines
46 KiB
C
/*-
|
|
* Copyright (c) 1999, 2000 Matthew R. Green
|
|
* Copyright (c) 2001 - 2003 by Thomas Moestl <tmm@FreeBSD.org>
|
|
* Copyright (c) 2005 - 2011 by Marius Strobl <marius@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
* 3. The name of the author may not be used to endorse or promote products
|
|
* derived from this software without specific prior written permission.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
|
|
* BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
|
|
* LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED
|
|
* AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
|
|
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
|
|
* SUCH DAMAGE.
|
|
*
|
|
* from: NetBSD: psycho.c,v 1.39 2001/10/07 20:30:41 eeh Exp
|
|
* from: FreeBSD: psycho.c 183152 2008-09-18 19:45:22Z marius
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
/*
|
|
* Driver for `Schizo' Fireplane/Safari to PCI 2.1, `Tomatillo' JBus to
|
|
* PCI 2.2 and `XMITS' Fireplane/Safari to PCI-X bridges
|
|
*/
|
|
|
|
#include "opt_ofw_pci.h"
|
|
#include "opt_schizo.h"
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/module.h>
|
|
#include <sys/mutex.h>
|
|
#include <sys/pcpu.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/time.h>
|
|
#include <sys/timetc.h>
|
|
|
|
#include <dev/ofw/ofw_bus.h>
|
|
#include <dev/ofw/ofw_pci.h>
|
|
#include <dev/ofw/openfirm.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/bus_common.h>
|
|
#include <machine/bus_private.h>
|
|
#include <machine/fsr.h>
|
|
#include <machine/iommureg.h>
|
|
#include <machine/iommuvar.h>
|
|
#include <machine/resource.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
|
|
#include <sparc64/pci/ofw_pci.h>
|
|
#include <sparc64/pci/schizoreg.h>
|
|
#include <sparc64/pci/schizovar.h>
|
|
|
|
#include "pcib_if.h"
|
|
|
|
static const struct schizo_desc *schizo_get_desc(device_t);
|
|
static void schizo_set_intr(struct schizo_softc *, u_int, u_int,
|
|
driver_filter_t);
|
|
static void schizo_dmamap_sync(bus_dma_tag_t dt, bus_dmamap_t map,
|
|
bus_dmasync_op_t op);
|
|
static void ichip_dmamap_sync(bus_dma_tag_t dt, bus_dmamap_t map,
|
|
bus_dmasync_op_t op);
|
|
static void schizo_intr_enable(void *);
|
|
static void schizo_intr_disable(void *);
|
|
static void schizo_intr_assign(void *);
|
|
static void schizo_intr_clear(void *);
|
|
static int schizo_intr_register(struct schizo_softc *sc, u_int ino);
|
|
static int schizo_get_intrmap(struct schizo_softc *, u_int,
|
|
bus_addr_t *, bus_addr_t *);
|
|
static bus_space_tag_t schizo_alloc_bus_tag(struct schizo_softc *, int);
|
|
static timecounter_get_t schizo_get_timecount;
|
|
|
|
/* Interrupt handlers */
|
|
static driver_filter_t schizo_pci_bus;
|
|
static driver_filter_t schizo_ue;
|
|
static driver_filter_t schizo_ce;
|
|
static driver_filter_t schizo_host_bus;
|
|
static driver_filter_t schizo_cdma;
|
|
|
|
/* IOMMU support */
|
|
static void schizo_iommu_init(struct schizo_softc *, int, uint32_t);
|
|
|
|
/*
|
|
* Methods
|
|
*/
|
|
static device_probe_t schizo_probe;
|
|
static device_attach_t schizo_attach;
|
|
static bus_read_ivar_t schizo_read_ivar;
|
|
static bus_setup_intr_t schizo_setup_intr;
|
|
static bus_alloc_resource_t schizo_alloc_resource;
|
|
static bus_activate_resource_t schizo_activate_resource;
|
|
static bus_deactivate_resource_t schizo_deactivate_resource;
|
|
static bus_release_resource_t schizo_release_resource;
|
|
static bus_get_dma_tag_t schizo_get_dma_tag;
|
|
static pcib_maxslots_t schizo_maxslots;
|
|
static pcib_read_config_t schizo_read_config;
|
|
static pcib_write_config_t schizo_write_config;
|
|
static pcib_route_interrupt_t schizo_route_interrupt;
|
|
static ofw_bus_get_node_t schizo_get_node;
|
|
static ofw_pci_setup_device_t schizo_setup_device;
|
|
|
|
static device_method_t schizo_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, schizo_probe),
|
|
DEVMETHOD(device_attach, schizo_attach),
|
|
DEVMETHOD(device_shutdown, bus_generic_shutdown),
|
|
DEVMETHOD(device_suspend, bus_generic_suspend),
|
|
DEVMETHOD(device_resume, bus_generic_resume),
|
|
|
|
/* Bus interface */
|
|
DEVMETHOD(bus_print_child, bus_generic_print_child),
|
|
DEVMETHOD(bus_read_ivar, schizo_read_ivar),
|
|
DEVMETHOD(bus_setup_intr, schizo_setup_intr),
|
|
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
|
|
DEVMETHOD(bus_alloc_resource, schizo_alloc_resource),
|
|
DEVMETHOD(bus_activate_resource, schizo_activate_resource),
|
|
DEVMETHOD(bus_deactivate_resource, schizo_deactivate_resource),
|
|
DEVMETHOD(bus_release_resource, schizo_release_resource),
|
|
DEVMETHOD(bus_get_dma_tag, schizo_get_dma_tag),
|
|
|
|
/* pcib interface */
|
|
DEVMETHOD(pcib_maxslots, schizo_maxslots),
|
|
DEVMETHOD(pcib_read_config, schizo_read_config),
|
|
DEVMETHOD(pcib_write_config, schizo_write_config),
|
|
DEVMETHOD(pcib_route_interrupt, schizo_route_interrupt),
|
|
|
|
/* ofw_bus interface */
|
|
DEVMETHOD(ofw_bus_get_node, schizo_get_node),
|
|
|
|
/* ofw_pci interface */
|
|
DEVMETHOD(ofw_pci_setup_device, schizo_setup_device),
|
|
|
|
KOBJMETHOD_END
|
|
};
|
|
|
|
static devclass_t schizo_devclass;
|
|
|
|
DEFINE_CLASS_0(pcib, schizo_driver, schizo_methods,
|
|
sizeof(struct schizo_softc));
|
|
EARLY_DRIVER_MODULE(schizo, nexus, schizo_driver, schizo_devclass, 0, 0,
|
|
BUS_PASS_BUS);
|
|
|
|
static SLIST_HEAD(, schizo_softc) schizo_softcs =
|
|
SLIST_HEAD_INITIALIZER(schizo_softcs);
|
|
|
|
static const struct intr_controller schizo_ic = {
|
|
schizo_intr_enable,
|
|
schizo_intr_disable,
|
|
schizo_intr_assign,
|
|
schizo_intr_clear
|
|
};
|
|
|
|
struct schizo_icarg {
|
|
struct schizo_softc *sica_sc;
|
|
bus_addr_t sica_map;
|
|
bus_addr_t sica_clr;
|
|
};
|
|
|
|
#define SCHIZO_PERF_CNT_QLTY 100
|
|
|
|
#define SCHIZO_SPC_BARRIER(spc, sc, offs, len, flags) \
|
|
bus_barrier((sc)->sc_mem_res[(spc)], (offs), (len), (flags))
|
|
#define SCHIZO_SPC_READ_8(spc, sc, offs) \
|
|
bus_read_8((sc)->sc_mem_res[(spc)], (offs))
|
|
#define SCHIZO_SPC_WRITE_8(spc, sc, offs, v) \
|
|
bus_write_8((sc)->sc_mem_res[(spc)], (offs), (v))
|
|
|
|
#ifndef SCHIZO_DEBUG
|
|
#define SCHIZO_SPC_SET(spc, sc, offs, reg, v) \
|
|
SCHIZO_SPC_WRITE_8((spc), (sc), (offs), (v))
|
|
#else
|
|
#define SCHIZO_SPC_SET(spc, sc, offs, reg, v) do { \
|
|
device_printf((sc)->sc_dev, reg " 0x%016llx -> 0x%016llx\n", \
|
|
(unsigned long long)SCHIZO_SPC_READ_8((spc), (sc), (offs)), \
|
|
(unsigned long long)(v)); \
|
|
SCHIZO_SPC_WRITE_8((spc), (sc), (offs), (v)); \
|
|
} while (0)
|
|
#endif
|
|
|
|
#define SCHIZO_PCI_READ_8(sc, offs) \
|
|
SCHIZO_SPC_READ_8(STX_PCI, (sc), (offs))
|
|
#define SCHIZO_PCI_WRITE_8(sc, offs, v) \
|
|
SCHIZO_SPC_WRITE_8(STX_PCI, (sc), (offs), (v))
|
|
#define SCHIZO_CTRL_READ_8(sc, offs) \
|
|
SCHIZO_SPC_READ_8(STX_CTRL, (sc), (offs))
|
|
#define SCHIZO_CTRL_WRITE_8(sc, offs, v) \
|
|
SCHIZO_SPC_WRITE_8(STX_CTRL, (sc), (offs), (v))
|
|
#define SCHIZO_PCICFG_READ_8(sc, offs) \
|
|
SCHIZO_SPC_READ_8(STX_PCICFG, (sc), (offs))
|
|
#define SCHIZO_PCICFG_WRITE_8(sc, offs, v) \
|
|
SCHIZO_SPC_WRITE_8(STX_PCICFG, (sc), (offs), (v))
|
|
#define SCHIZO_ICON_READ_8(sc, offs) \
|
|
SCHIZO_SPC_READ_8(STX_ICON, (sc), (offs))
|
|
#define SCHIZO_ICON_WRITE_8(sc, offs, v) \
|
|
SCHIZO_SPC_WRITE_8(STX_ICON, (sc), (offs), (v))
|
|
|
|
#define SCHIZO_PCI_SET(sc, offs, v) \
|
|
SCHIZO_SPC_SET(STX_PCI, (sc), (offs), # offs, (v))
|
|
#define SCHIZO_CTRL_SET(sc, offs, v) \
|
|
SCHIZO_SPC_SET(STX_CTRL, (sc), (offs), # offs, (v))
|
|
|
|
struct schizo_desc {
|
|
const char *sd_string;
|
|
int sd_mode;
|
|
const char *sd_name;
|
|
};
|
|
|
|
static const struct schizo_desc const schizo_compats[] = {
|
|
{ "pci108e,8001", SCHIZO_MODE_SCZ, "Schizo" },
|
|
#if 0
|
|
{ "pci108e,8002", SCHIZO_MODE_XMS, "XMITS" },
|
|
#endif
|
|
{ "pci108e,a801", SCHIZO_MODE_TOM, "Tomatillo" },
|
|
{ NULL, 0, NULL }
|
|
};
|
|
|
|
static const struct schizo_desc *
|
|
schizo_get_desc(device_t dev)
|
|
{
|
|
const struct schizo_desc *desc;
|
|
const char *compat;
|
|
|
|
compat = ofw_bus_get_compat(dev);
|
|
if (compat == NULL)
|
|
return (NULL);
|
|
for (desc = schizo_compats; desc->sd_string != NULL; desc++)
|
|
if (strcmp(desc->sd_string, compat) == 0)
|
|
return (desc);
|
|
return (NULL);
|
|
}
|
|
|
|
static int
|
|
schizo_probe(device_t dev)
|
|
{
|
|
const char *dtype;
|
|
|
|
dtype = ofw_bus_get_type(dev);
|
|
if (dtype != NULL && strcmp(dtype, OFW_TYPE_PCI) == 0 &&
|
|
schizo_get_desc(dev) != NULL) {
|
|
device_set_desc(dev, "Sun Host-PCI bridge");
|
|
return (0);
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
static int
|
|
schizo_attach(device_t dev)
|
|
{
|
|
struct ofw_pci_ranges *range;
|
|
const struct schizo_desc *desc;
|
|
struct schizo_softc *asc, *sc, *osc;
|
|
struct timecounter *tc;
|
|
uint64_t ino_bitmap, reg;
|
|
phandle_t node;
|
|
uint32_t prop, prop_array[2];
|
|
int i, j, mode, rid, tsbsize;
|
|
|
|
sc = device_get_softc(dev);
|
|
node = ofw_bus_get_node(dev);
|
|
desc = schizo_get_desc(dev);
|
|
mode = desc->sd_mode;
|
|
|
|
sc->sc_dev = dev;
|
|
sc->sc_node = node;
|
|
sc->sc_mode = mode;
|
|
sc->sc_flags = 0;
|
|
|
|
/*
|
|
* The Schizo has three register banks:
|
|
* (0) per-PBM PCI configuration and status registers, but for bus B
|
|
* shared with the UPA64s interrupt mapping register banks
|
|
* (1) shared Schizo controller configuration and status registers
|
|
* (2) per-PBM PCI configuration space
|
|
*
|
|
* The Tomatillo has four register banks:
|
|
* (0) per-PBM PCI configuration and status registers
|
|
* (1) per-PBM Tomatillo controller configuration registers, but on
|
|
* machines having the `jbusppm' device shared with its Estar
|
|
* register bank for bus A
|
|
* (2) per-PBM PCI configuration space
|
|
* (3) per-PBM interrupt concentrator registers
|
|
*/
|
|
sc->sc_half = (bus_get_resource_start(dev, SYS_RES_MEMORY, STX_PCI) >>
|
|
20) & 1;
|
|
for (i = 0; i < (mode == SCHIZO_MODE_SCZ ? SCZ_NREG : TOM_NREG);
|
|
i++) {
|
|
rid = i;
|
|
sc->sc_mem_res[i] = bus_alloc_resource_any(dev,
|
|
SYS_RES_MEMORY, &rid,
|
|
(((mode == SCHIZO_MODE_SCZ && ((sc->sc_half == 1 &&
|
|
i == STX_PCI) || i == STX_CTRL)) ||
|
|
(mode == SCHIZO_MODE_TOM && sc->sc_half == 0 &&
|
|
i == STX_CTRL)) ? RF_SHAREABLE : 0) | RF_ACTIVE);
|
|
if (sc->sc_mem_res[i] == NULL)
|
|
panic("%s: could not allocate register bank %d",
|
|
__func__, i);
|
|
}
|
|
|
|
/*
|
|
* Match other Schizos that are already configured against
|
|
* the controller base physical address. This will be the
|
|
* same for a pair of devices that share register space.
|
|
*/
|
|
osc = NULL;
|
|
SLIST_FOREACH(asc, &schizo_softcs, sc_link) {
|
|
if (rman_get_start(asc->sc_mem_res[STX_CTRL]) ==
|
|
rman_get_start(sc->sc_mem_res[STX_CTRL])) {
|
|
/* Found partner. */
|
|
osc = asc;
|
|
break;
|
|
}
|
|
}
|
|
if (osc == NULL) {
|
|
sc->sc_mtx = malloc(sizeof(*sc->sc_mtx), M_DEVBUF,
|
|
M_NOWAIT | M_ZERO);
|
|
if (sc->sc_mtx == NULL)
|
|
panic("%s: could not malloc mutex", __func__);
|
|
mtx_init(sc->sc_mtx, "pcib_mtx", NULL, MTX_SPIN);
|
|
} else {
|
|
if (sc->sc_mode != SCHIZO_MODE_SCZ)
|
|
panic("%s: no partner expected", __func__);
|
|
if (mtx_initialized(osc->sc_mtx) == 0)
|
|
panic("%s: mutex not initialized", __func__);
|
|
sc->sc_mtx = osc->sc_mtx;
|
|
}
|
|
|
|
if (OF_getprop(node, "portid", &sc->sc_ign, sizeof(sc->sc_ign)) == -1)
|
|
panic("%s: could not determine IGN", __func__);
|
|
if (OF_getprop(node, "version#", &sc->sc_ver, sizeof(sc->sc_ver)) ==
|
|
-1)
|
|
panic("%s: could not determine version", __func__);
|
|
if (mode == SCHIZO_MODE_XMS && OF_getprop(node, "module-revision#",
|
|
&sc->sc_mrev, sizeof(sc->sc_mrev)) == -1)
|
|
panic("%s: could not determine module-revision", __func__);
|
|
if (OF_getprop(node, "clock-frequency", &prop, sizeof(prop)) == -1)
|
|
prop = 33000000;
|
|
|
|
if (mode == SCHIZO_MODE_XMS && (SCHIZO_PCI_READ_8(sc, STX_PCI_CTRL) &
|
|
XMS_PCI_CTRL_X_MODE) != 0) {
|
|
if (sc->sc_mrev < 1)
|
|
panic("PCI-X mode unsupported");
|
|
sc->sc_flags |= SCHIZO_FLAGS_XMODE;
|
|
}
|
|
|
|
device_printf(dev, "%s, version %d, ", desc->sd_name, sc->sc_ver);
|
|
if (mode == SCHIZO_MODE_XMS)
|
|
printf("module-revision %d, ", sc->sc_mrev);
|
|
printf("IGN %#x, bus %c, PCI%s mode, %dMHz\n", sc->sc_ign,
|
|
'A' + sc->sc_half, (sc->sc_flags & SCHIZO_FLAGS_XMODE) != 0 ?
|
|
"-X" : "", prop / 1000 / 1000);
|
|
|
|
/* Set up the PCI interrupt retry timer. */
|
|
SCHIZO_PCI_SET(sc, STX_PCI_INTR_RETRY_TIM, 5);
|
|
|
|
/* Set up the PCI control register. */
|
|
reg = SCHIZO_PCI_READ_8(sc, STX_PCI_CTRL);
|
|
reg &= ~(TOM_PCI_CTRL_DTO_IEN | STX_PCI_CTRL_ARB_PARK |
|
|
STX_PCI_CTRL_ARB_MASK);
|
|
reg |= STX_PCI_CTRL_MMU_IEN | STX_PCI_CTRL_SBH_IEN |
|
|
STX_PCI_CTRL_ERR_IEN;
|
|
if (OF_getproplen(node, "no-bus-parking") < 0)
|
|
reg |= STX_PCI_CTRL_ARB_PARK;
|
|
if (mode == SCHIZO_MODE_XMS && sc->sc_mrev == 1)
|
|
reg |= XMS_PCI_CTRL_XMITS10_ARB_MASK;
|
|
else
|
|
reg |= STX_PCI_CTRL_ARB_MASK;
|
|
if (mode == SCHIZO_MODE_TOM) {
|
|
reg |= TOM_PCI_CTRL_PRM | TOM_PCI_CTRL_PRO | TOM_PCI_CTRL_PRL;
|
|
if (sc->sc_ver <= 1) /* revision <= 2.0 */
|
|
reg |= TOM_PCI_CTRL_DTO_IEN;
|
|
else
|
|
reg |= STX_PCI_CTRL_PTO;
|
|
} else if (mode == SCHIZO_MODE_XMS) {
|
|
SCHIZO_PCI_SET(sc, XMS_PCI_PARITY_DETECT, 0x3fff);
|
|
SCHIZO_PCI_SET(sc, XMS_PCI_UPPER_RETRY_COUNTER, 0x3e8);
|
|
reg |= XMS_PCI_CTRL_X_ERRINT_EN;
|
|
}
|
|
SCHIZO_PCI_SET(sc, STX_PCI_CTRL, reg);
|
|
|
|
/* Set up the PCI diagnostic register. */
|
|
reg = SCHIZO_PCI_READ_8(sc, STX_PCI_DIAG);
|
|
reg &= ~(SCZ_PCI_DIAG_RTRYARB_DIS | STX_PCI_DIAG_RETRY_DIS |
|
|
STX_PCI_DIAG_INTRSYNC_DIS);
|
|
SCHIZO_PCI_SET(sc, STX_PCI_DIAG, reg);
|
|
|
|
/*
|
|
* Enable DMA write parity error interrupts of version >= 7 (i.e.
|
|
* revision >= 2.5) Schizo and XMITS (enabling it on XMITS < 3.0 has
|
|
* no effect though).
|
|
*/
|
|
if ((mode == SCHIZO_MODE_SCZ && sc->sc_ver >= 7) ||
|
|
mode == SCHIZO_MODE_XMS) {
|
|
reg = SCHIZO_PCI_READ_8(sc, SX_PCI_CFG_ICD);
|
|
reg |= SX_PCI_CFG_ICD_DMAW_PERR_IEN;
|
|
SCHIZO_PCI_SET(sc, SX_PCI_CFG_ICD, reg);
|
|
}
|
|
|
|
/*
|
|
* On Tomatillo clear the I/O prefetch lengths (workaround for a
|
|
* Jalapeno bug).
|
|
*/
|
|
if (mode == SCHIZO_MODE_TOM)
|
|
SCHIZO_PCI_SET(sc, TOM_PCI_IOC_CSR, TOM_PCI_IOC_PW |
|
|
(1 << TOM_PCI_IOC_PREF_OFF_SHIFT) | TOM_PCI_IOC_CPRM |
|
|
TOM_PCI_IOC_CPRO | TOM_PCI_IOC_CPRL);
|
|
|
|
/*
|
|
* Hunt through all the interrupt mapping regs and register
|
|
* the interrupt controller for our interrupt vectors. We do
|
|
* this early in order to be able to catch stray interrupts.
|
|
* This is complicated by the fact that a pair of Schizo PBMs
|
|
* shares one IGN.
|
|
*/
|
|
i = OF_getprop(node, "ino-bitmap", (void *)prop_array,
|
|
sizeof(prop_array));
|
|
if (i != -1)
|
|
ino_bitmap = ((uint64_t)prop_array[1] << 32) | prop_array[0];
|
|
else {
|
|
/*
|
|
* If the ino-bitmap property is missing, just provide the
|
|
* default set of interrupts for this controller and let
|
|
* schizo_setup_intr() take care of child interrupts.
|
|
*/
|
|
if (sc->sc_half == 0)
|
|
ino_bitmap = (1ULL << STX_UE_INO) |
|
|
(1ULL << STX_CE_INO) |
|
|
(1ULL << STX_PCIERR_A_INO) |
|
|
(1ULL << STX_BUS_INO);
|
|
else
|
|
ino_bitmap = 1ULL << STX_PCIERR_B_INO;
|
|
}
|
|
for (i = 0; i <= STX_MAX_INO; i++) {
|
|
if ((ino_bitmap & (1ULL << i)) == 0)
|
|
continue;
|
|
if (i == STX_FB0_INO || i == STX_FB1_INO)
|
|
/* Leave for upa(4). */
|
|
continue;
|
|
j = schizo_intr_register(sc, i);
|
|
if (j != 0)
|
|
device_printf(dev, "could not register interrupt "
|
|
"controller for INO %d (%d)\n", i, j);
|
|
}
|
|
|
|
/*
|
|
* Setup Safari/JBus performance counter 0 in bus cycle counting
|
|
* mode as timecounter. Unfortunately, this is broken with at
|
|
* least the version 4 Tomatillos found in Fire V120 and Blade
|
|
* 1500, which apparently actually count some different event at
|
|
* ~0.5 and 3MHz respectively instead (also when running in full
|
|
* power mode). Besides, one counter seems to be shared by a
|
|
* "pair" of Tomatillos, too.
|
|
*/
|
|
if (sc->sc_half == 0) {
|
|
SCHIZO_CTRL_SET(sc, STX_CTRL_PERF,
|
|
(STX_CTRL_PERF_DIS << STX_CTRL_PERF_CNT1_SHIFT) |
|
|
(STX_CTRL_PERF_BUSCYC << STX_CTRL_PERF_CNT0_SHIFT));
|
|
tc = malloc(sizeof(*tc), M_DEVBUF, M_NOWAIT | M_ZERO);
|
|
if (tc == NULL)
|
|
panic("%s: could not malloc timecounter", __func__);
|
|
tc->tc_get_timecount = schizo_get_timecount;
|
|
tc->tc_poll_pps = NULL;
|
|
tc->tc_counter_mask = STX_CTRL_PERF_CNT_MASK;
|
|
if (OF_getprop(OF_peer(0), "clock-frequency", &prop,
|
|
sizeof(prop)) == -1)
|
|
panic("%s: could not determine clock frequency",
|
|
__func__);
|
|
tc->tc_frequency = prop;
|
|
tc->tc_name = strdup(device_get_nameunit(dev), M_DEVBUF);
|
|
if (mode == SCHIZO_MODE_SCZ)
|
|
tc->tc_quality = SCHIZO_PERF_CNT_QLTY;
|
|
else
|
|
tc->tc_quality = -SCHIZO_PERF_CNT_QLTY;
|
|
tc->tc_priv = sc;
|
|
tc_init(tc);
|
|
}
|
|
|
|
/*
|
|
* Set up the IOMMU. Schizo, Tomatillo and XMITS all have
|
|
* one per PBM. Schizo and XMITS additionally have a streaming
|
|
* buffer, in Schizo version < 5 (i.e. revision < 2.3) it's
|
|
* affected by several errata and basically unusable though.
|
|
*/
|
|
memcpy(&sc->sc_dma_methods, &iommu_dma_methods,
|
|
sizeof(sc->sc_dma_methods));
|
|
sc->sc_is.sis_sc = sc;
|
|
sc->sc_is.sis_is.is_flags = IOMMU_PRESERVE_PROM;
|
|
sc->sc_is.sis_is.is_pmaxaddr = IOMMU_MAXADDR(STX_IOMMU_BITS);
|
|
sc->sc_is.sis_is.is_sb[0] = sc->sc_is.sis_is.is_sb[1] = 0;
|
|
if (OF_getproplen(node, "no-streaming-cache") < 0 &&
|
|
!(sc->sc_mode == SCHIZO_MODE_SCZ && sc->sc_ver < 5))
|
|
sc->sc_is.sis_is.is_sb[0] = STX_PCI_STRBUF;
|
|
|
|
#define TSBCASE(x) \
|
|
case (IOTSB_BASESZ << (x)) << (IO_PAGE_SHIFT - IOTTE_SHIFT): \
|
|
tsbsize = (x); \
|
|
break; \
|
|
|
|
i = OF_getprop(node, "virtual-dma", (void *)prop_array,
|
|
sizeof(prop_array));
|
|
if (i == -1 || i != sizeof(prop_array))
|
|
schizo_iommu_init(sc, 7, -1);
|
|
else {
|
|
switch (prop_array[1]) {
|
|
TSBCASE(1);
|
|
TSBCASE(2);
|
|
TSBCASE(3);
|
|
TSBCASE(4);
|
|
TSBCASE(5);
|
|
TSBCASE(6);
|
|
TSBCASE(7);
|
|
TSBCASE(8);
|
|
default:
|
|
panic("%s: unsupported DVMA size 0x%x",
|
|
__func__, prop_array[1]);
|
|
/* NOTREACHED */
|
|
}
|
|
schizo_iommu_init(sc, tsbsize, prop_array[0]);
|
|
}
|
|
|
|
#undef TSBCASE
|
|
|
|
/* Initialize memory and I/O rmans. */
|
|
sc->sc_pci_io_rman.rm_type = RMAN_ARRAY;
|
|
sc->sc_pci_io_rman.rm_descr = "Schizo PCI I/O Ports";
|
|
if (rman_init(&sc->sc_pci_io_rman) != 0 ||
|
|
rman_manage_region(&sc->sc_pci_io_rman, 0, STX_IO_SIZE) != 0)
|
|
panic("%s: failed to set up I/O rman", __func__);
|
|
sc->sc_pci_mem_rman.rm_type = RMAN_ARRAY;
|
|
sc->sc_pci_mem_rman.rm_descr = "Schizo PCI Memory";
|
|
if (rman_init(&sc->sc_pci_mem_rman) != 0 ||
|
|
rman_manage_region(&sc->sc_pci_mem_rman, 0, STX_MEM_SIZE) != 0)
|
|
panic("%s: failed to set up memory rman", __func__);
|
|
|
|
i = OF_getprop_alloc(node, "ranges", sizeof(*range), (void **)&range);
|
|
/*
|
|
* Make sure that the expected ranges are present. The
|
|
* OFW_PCI_CS_MEM64 one is not currently used though.
|
|
*/
|
|
if (i != STX_NRANGE)
|
|
panic("%s: unsupported number of ranges", __func__);
|
|
/*
|
|
* Find the addresses of the various bus spaces.
|
|
* There should not be multiple ones of one kind.
|
|
* The physical start addresses of the ranges are the configuration,
|
|
* memory and I/O handles.
|
|
*/
|
|
for (i = 0; i < STX_NRANGE; i++) {
|
|
j = OFW_PCI_RANGE_CS(&range[i]);
|
|
if (sc->sc_pci_bh[j] != 0)
|
|
panic("%s: duplicate range for space %d",
|
|
__func__, j);
|
|
sc->sc_pci_bh[j] = OFW_PCI_RANGE_PHYS(&range[i]);
|
|
}
|
|
free(range, M_OFWPROP);
|
|
|
|
/* Register the softc, this is needed for paired Schizos. */
|
|
SLIST_INSERT_HEAD(&schizo_softcs, sc, sc_link);
|
|
|
|
/* Allocate our tags. */
|
|
sc->sc_pci_memt = schizo_alloc_bus_tag(sc, PCI_MEMORY_BUS_SPACE);
|
|
sc->sc_pci_iot = schizo_alloc_bus_tag(sc, PCI_IO_BUS_SPACE);
|
|
sc->sc_pci_cfgt = schizo_alloc_bus_tag(sc, PCI_CONFIG_BUS_SPACE);
|
|
if (bus_dma_tag_create(bus_get_dma_tag(dev), 8, 0,
|
|
sc->sc_is.sis_is.is_pmaxaddr, ~0, NULL, NULL,
|
|
sc->sc_is.sis_is.is_pmaxaddr, 0xff, 0xffffffff, 0, NULL, NULL,
|
|
&sc->sc_pci_dmat) != 0)
|
|
panic("%s: bus_dma_tag_create failed", __func__);
|
|
/* Customize the tag. */
|
|
sc->sc_pci_dmat->dt_cookie = &sc->sc_is;
|
|
sc->sc_pci_dmat->dt_mt = &sc->sc_dma_methods;
|
|
|
|
/*
|
|
* Get the bus range from the firmware.
|
|
* NB: Tomatillos don't support PCI bus reenumeration.
|
|
*/
|
|
i = OF_getprop(node, "bus-range", (void *)prop_array,
|
|
sizeof(prop_array));
|
|
if (i == -1)
|
|
panic("%s: could not get bus-range", __func__);
|
|
if (i != sizeof(prop_array))
|
|
panic("%s: broken bus-range (%d)", __func__, i);
|
|
sc->sc_pci_secbus = prop_array[0];
|
|
sc->sc_pci_subbus = prop_array[1];
|
|
if (bootverbose)
|
|
device_printf(dev, "bus range %u to %u; PCI bus %d\n",
|
|
sc->sc_pci_secbus, sc->sc_pci_subbus, sc->sc_pci_secbus);
|
|
|
|
/* Clear any pending PCI error bits. */
|
|
PCIB_WRITE_CONFIG(dev, sc->sc_pci_secbus, STX_CS_DEVICE, STX_CS_FUNC,
|
|
PCIR_STATUS, PCIB_READ_CONFIG(dev, sc->sc_pci_secbus,
|
|
STX_CS_DEVICE, STX_CS_FUNC, PCIR_STATUS, 2), 2);
|
|
SCHIZO_PCI_SET(sc, STX_PCI_CTRL, SCHIZO_PCI_READ_8(sc, STX_PCI_CTRL));
|
|
SCHIZO_PCI_SET(sc, STX_PCI_AFSR, SCHIZO_PCI_READ_8(sc, STX_PCI_AFSR));
|
|
|
|
/*
|
|
* Establish handlers for interesting interrupts...
|
|
* Someone at Sun clearly was smoking crack; with Schizos PCI
|
|
* bus error interrupts for one PBM can be routed to the other
|
|
* PBM though we obviously need to use the softc of the former
|
|
* as the argument for the interrupt handler and the softc of
|
|
* the latter as the argument for the interrupt controller.
|
|
*/
|
|
if (sc->sc_half == 0) {
|
|
if ((ino_bitmap & (1ULL << STX_PCIERR_A_INO)) != 0 ||
|
|
(osc != NULL && ((struct schizo_icarg *)intr_vectors[
|
|
INTMAP_VEC(sc->sc_ign, STX_PCIERR_A_INO)].iv_icarg)->
|
|
sica_sc == osc))
|
|
/*
|
|
* We are the driver for PBM A and either also
|
|
* registered the interrupt controller for us or
|
|
* the driver for PBM B has probed first and
|
|
* registered it for us.
|
|
*/
|
|
schizo_set_intr(sc, 0, STX_PCIERR_A_INO,
|
|
schizo_pci_bus);
|
|
if ((ino_bitmap & (1ULL << STX_PCIERR_B_INO)) != 0 &&
|
|
osc != NULL)
|
|
/*
|
|
* We are the driver for PBM A but registered
|
|
* the interrupt controller for PBM B, i.e. the
|
|
* driver for PBM B attached first but couldn't
|
|
* set up a handler for PBM B.
|
|
*/
|
|
schizo_set_intr(osc, 0, STX_PCIERR_B_INO,
|
|
schizo_pci_bus);
|
|
} else {
|
|
if ((ino_bitmap & (1ULL << STX_PCIERR_B_INO)) != 0 ||
|
|
(osc != NULL && ((struct schizo_icarg *)intr_vectors[
|
|
INTMAP_VEC(sc->sc_ign, STX_PCIERR_B_INO)].iv_icarg)->
|
|
sica_sc == osc))
|
|
/*
|
|
* We are the driver for PBM B and either also
|
|
* registered the interrupt controller for us or
|
|
* the driver for PBM A has probed first and
|
|
* registered it for us.
|
|
*/
|
|
schizo_set_intr(sc, 0, STX_PCIERR_B_INO,
|
|
schizo_pci_bus);
|
|
if ((ino_bitmap & (1ULL << STX_PCIERR_A_INO)) != 0 &&
|
|
osc != NULL)
|
|
/*
|
|
* We are the driver for PBM B but registered
|
|
* the interrupt controller for PBM A, i.e. the
|
|
* driver for PBM A attached first but couldn't
|
|
* set up a handler for PBM A.
|
|
*/
|
|
schizo_set_intr(osc, 0, STX_PCIERR_A_INO,
|
|
schizo_pci_bus);
|
|
}
|
|
if ((ino_bitmap & (1ULL << STX_UE_INO)) != 0)
|
|
schizo_set_intr(sc, 1, STX_UE_INO, schizo_ue);
|
|
if ((ino_bitmap & (1ULL << STX_CE_INO)) != 0)
|
|
schizo_set_intr(sc, 2, STX_CE_INO, schizo_ce);
|
|
if ((ino_bitmap & (1ULL << STX_BUS_INO)) != 0)
|
|
schizo_set_intr(sc, 3, STX_BUS_INO, schizo_host_bus);
|
|
|
|
/*
|
|
* According to the Schizo Errata I-13, consistent DMA flushing/
|
|
* syncing is FUBAR in version < 5 (i.e. revision < 2.3) bridges,
|
|
* so we can't use it and need to live with the consequences. With
|
|
* Schizo version >= 5, CDMA flushing/syncing is usable but requires
|
|
* the workaround described in Schizo Errata I-23. With Tomatillo
|
|
* and XMITS, CDMA flushing/syncing works as expected, Tomatillo
|
|
* version <= 4 (i.e. revision <= 2.3) bridges additionally require
|
|
* a block store after a write to TOMXMS_PCI_DMA_SYNC_PEND though.
|
|
*/
|
|
if ((sc->sc_mode == SCHIZO_MODE_SCZ && sc->sc_ver >= 5) ||
|
|
sc->sc_mode == SCHIZO_MODE_TOM ||
|
|
sc->sc_mode == SCHIZO_MODE_XMS) {
|
|
if (sc->sc_mode == SCHIZO_MODE_SCZ) {
|
|
sc->sc_dma_methods.dm_dmamap_sync =
|
|
schizo_dmamap_sync;
|
|
sc->sc_cdma_state = SCHIZO_CDMA_STATE_IDLE;
|
|
/*
|
|
* Some firmware versions include the CDMA interrupt
|
|
* at RID 4 but most don't. With the latter we add
|
|
* it ourselves at the spare RID 5.
|
|
*/
|
|
i = INTINO(bus_get_resource_start(dev, SYS_RES_IRQ,
|
|
4));
|
|
if (i == STX_CDMA_A_INO || i == STX_CDMA_B_INO) {
|
|
(void)schizo_get_intrmap(sc, i, NULL,
|
|
&sc->sc_cdma_clr);
|
|
schizo_set_intr(sc, 4, i, schizo_cdma);
|
|
} else {
|
|
i = STX_CDMA_A_INO + sc->sc_half;
|
|
if (bus_set_resource(dev, SYS_RES_IRQ, 5,
|
|
INTMAP_VEC(sc->sc_ign, i), 1) != 0)
|
|
panic("%s: failed to add CDMA "
|
|
"interrupt", __func__);
|
|
j = schizo_intr_register(sc, i);
|
|
if (j != 0)
|
|
panic("%s: could not register "
|
|
"interrupt controller for CDMA "
|
|
"(%d)", __func__, j);
|
|
(void)schizo_get_intrmap(sc, i, NULL,
|
|
&sc->sc_cdma_clr);
|
|
schizo_set_intr(sc, 5, i, schizo_cdma);
|
|
}
|
|
} else {
|
|
if (sc->sc_mode == SCHIZO_MODE_XMS)
|
|
mtx_init(&sc->sc_sync_mtx, "pcib_sync_mtx",
|
|
NULL, MTX_SPIN);
|
|
sc->sc_sync_val = 1ULL << (STX_PCIERR_A_INO +
|
|
sc->sc_half);
|
|
sc->sc_dma_methods.dm_dmamap_sync =
|
|
ichip_dmamap_sync;
|
|
}
|
|
if (sc->sc_mode == SCHIZO_MODE_TOM && sc->sc_ver <= 4)
|
|
sc->sc_flags |= SCHIZO_FLAGS_BSWAR;
|
|
}
|
|
|
|
/*
|
|
* Set the latency timer register as this isn't always done by the
|
|
* firmware.
|
|
*/
|
|
PCIB_WRITE_CONFIG(dev, sc->sc_pci_secbus, STX_CS_DEVICE, STX_CS_FUNC,
|
|
PCIR_LATTIMER, OFW_PCI_LATENCY, 1);
|
|
|
|
ofw_bus_setup_iinfo(node, &sc->sc_pci_iinfo, sizeof(ofw_pci_intr_t));
|
|
|
|
#define SCHIZO_SYSCTL_ADD_UINT(name, arg, desc) \
|
|
SYSCTL_ADD_UINT(device_get_sysctl_ctx(dev), \
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)), OID_AUTO, \
|
|
(name), CTLFLAG_RD, (arg), 0, (desc))
|
|
|
|
SCHIZO_SYSCTL_ADD_UINT("dma_ce", &sc->sc_stats_dma_ce,
|
|
"DMA correctable errors");
|
|
SCHIZO_SYSCTL_ADD_UINT("pci_non_fatal", &sc->sc_stats_pci_non_fatal,
|
|
"PCI bus non-fatal errors");
|
|
|
|
#undef SCHIZO_SYSCTL_ADD_UINT
|
|
|
|
device_add_child(dev, "pci", -1);
|
|
return (bus_generic_attach(dev));
|
|
}
|
|
|
|
static void
|
|
schizo_set_intr(struct schizo_softc *sc, u_int index, u_int ino,
|
|
driver_filter_t handler)
|
|
{
|
|
u_long vec;
|
|
int rid;
|
|
|
|
rid = index;
|
|
sc->sc_irq_res[index] = bus_alloc_resource_any(sc->sc_dev,
|
|
SYS_RES_IRQ, &rid, RF_ACTIVE);
|
|
if (sc->sc_irq_res[index] == NULL ||
|
|
INTINO(vec = rman_get_start(sc->sc_irq_res[index])) != ino ||
|
|
INTIGN(vec) != sc->sc_ign ||
|
|
intr_vectors[vec].iv_ic != &schizo_ic ||
|
|
bus_setup_intr(sc->sc_dev, sc->sc_irq_res[index],
|
|
INTR_TYPE_MISC | INTR_BRIDGE, handler, NULL, sc,
|
|
&sc->sc_ihand[index]) != 0)
|
|
panic("%s: failed to set up interrupt %d", __func__, index);
|
|
}
|
|
|
|
static int
|
|
schizo_intr_register(struct schizo_softc *sc, u_int ino)
|
|
{
|
|
struct schizo_icarg *sica;
|
|
bus_addr_t intrclr, intrmap;
|
|
int error;
|
|
|
|
if (schizo_get_intrmap(sc, ino, &intrmap, &intrclr) == 0)
|
|
return (ENXIO);
|
|
sica = malloc(sizeof(*sica), M_DEVBUF, M_NOWAIT);
|
|
if (sica == NULL)
|
|
return (ENOMEM);
|
|
sica->sica_sc = sc;
|
|
sica->sica_map = intrmap;
|
|
sica->sica_clr = intrclr;
|
|
#ifdef SCHIZO_DEBUG
|
|
device_printf(sc->sc_dev, "intr map (INO %d) %#lx: %#lx, clr: %#lx\n",
|
|
ino, (u_long)intrmap, (u_long)SCHIZO_PCI_READ_8(sc, intrmap),
|
|
(u_long)intrclr);
|
|
#endif
|
|
error = (intr_controller_register(INTMAP_VEC(sc->sc_ign, ino),
|
|
&schizo_ic, sica));
|
|
if (error != 0)
|
|
free(sica, M_DEVBUF);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
schizo_get_intrmap(struct schizo_softc *sc, u_int ino,
|
|
bus_addr_t *intrmapptr, bus_addr_t *intrclrptr)
|
|
{
|
|
bus_addr_t intrclr, intrmap;
|
|
uint64_t mr;
|
|
|
|
/*
|
|
* XXX we only look for INOs rather than INRs since the firmware
|
|
* may not provide the IGN and the IGN is constant for all devices
|
|
* on that PCI controller.
|
|
*/
|
|
|
|
if (ino > STX_MAX_INO) {
|
|
device_printf(sc->sc_dev, "out of range INO %d requested\n",
|
|
ino);
|
|
return (0);
|
|
}
|
|
|
|
intrmap = STX_PCI_IMAP_BASE + (ino << 3);
|
|
intrclr = STX_PCI_ICLR_BASE + (ino << 3);
|
|
mr = SCHIZO_PCI_READ_8(sc, intrmap);
|
|
if (INTINO(mr) != ino) {
|
|
device_printf(sc->sc_dev,
|
|
"interrupt map entry does not match INO (%d != %d)\n",
|
|
(int)INTINO(mr), ino);
|
|
return (0);
|
|
}
|
|
|
|
if (intrmapptr != NULL)
|
|
*intrmapptr = intrmap;
|
|
if (intrclrptr != NULL)
|
|
*intrclrptr = intrclr;
|
|
return (1);
|
|
}
|
|
|
|
/*
|
|
* Interrupt handlers
|
|
*/
|
|
static int
|
|
schizo_pci_bus(void *arg)
|
|
{
|
|
struct schizo_softc *sc = arg;
|
|
uint64_t afar, afsr, csr, iommu, xstat;
|
|
uint32_t status;
|
|
u_int fatal;
|
|
|
|
fatal = 0;
|
|
|
|
mtx_lock_spin(sc->sc_mtx);
|
|
|
|
afar = SCHIZO_PCI_READ_8(sc, STX_PCI_AFAR);
|
|
afsr = SCHIZO_PCI_READ_8(sc, STX_PCI_AFSR);
|
|
csr = SCHIZO_PCI_READ_8(sc, STX_PCI_CTRL);
|
|
iommu = SCHIZO_PCI_READ_8(sc, STX_PCI_IOMMU);
|
|
if ((sc->sc_flags & SCHIZO_FLAGS_XMODE) != 0)
|
|
xstat = SCHIZO_PCI_READ_8(sc, XMS_PCI_X_ERR_STAT);
|
|
else
|
|
xstat = 0;
|
|
status = PCIB_READ_CONFIG(sc->sc_dev, sc->sc_pci_secbus,
|
|
STX_CS_DEVICE, STX_CS_FUNC, PCIR_STATUS, 2);
|
|
|
|
/*
|
|
* IOMMU errors are only fatal on Tomatillo and there also only if
|
|
* target abort was not signaled.
|
|
*/
|
|
if ((csr & STX_PCI_CTRL_MMU_ERR) != 0 &&
|
|
(iommu & TOM_PCI_IOMMU_ERR) != 0 &&
|
|
((status & PCIM_STATUS_STABORT) == 0 ||
|
|
((iommu & TOM_PCI_IOMMU_ERRMASK) != TOM_PCI_IOMMU_INVALID_ERR &&
|
|
(iommu & TOM_PCI_IOMMU_ERR_ILLTSBTBW) == 0 &&
|
|
(iommu & TOM_PCI_IOMMU_ERR_BAD_VA) == 0)))
|
|
fatal = 1;
|
|
else if ((status & PCIM_STATUS_STABORT) != 0)
|
|
fatal = 1;
|
|
if ((status & (PCIM_STATUS_PERR | PCIM_STATUS_SERR |
|
|
PCIM_STATUS_RMABORT | PCIM_STATUS_RTABORT |
|
|
PCIM_STATUS_MDPERR)) != 0 ||
|
|
(csr & (SCZ_PCI_CTRL_BUS_UNUS | TOM_PCI_CTRL_DTO_ERR |
|
|
STX_PCI_CTRL_TTO_ERR | STX_PCI_CTRL_RTRY_ERR |
|
|
SCZ_PCI_CTRL_SBH_ERR | STX_PCI_CTRL_SERR)) != 0 ||
|
|
(afsr & (STX_PCI_AFSR_P_MA | STX_PCI_AFSR_P_TA |
|
|
STX_PCI_AFSR_P_RTRY | STX_PCI_AFSR_P_PERR | STX_PCI_AFSR_P_TTO |
|
|
STX_PCI_AFSR_P_UNUS)) != 0)
|
|
fatal = 1;
|
|
if (xstat & (XMS_PCI_X_ERR_STAT_P_SC_DSCRD |
|
|
XMS_PCI_X_ERR_STAT_P_SC_TTO | XMS_PCI_X_ERR_STAT_P_SDSTAT |
|
|
XMS_PCI_X_ERR_STAT_P_SMMU | XMS_PCI_X_ERR_STAT_P_CDSTAT |
|
|
XMS_PCI_X_ERR_STAT_P_CMMU | XMS_PCI_X_ERR_STAT_PERR_RCV))
|
|
fatal = 1;
|
|
if (fatal == 0)
|
|
sc->sc_stats_pci_non_fatal++;
|
|
|
|
device_printf(sc->sc_dev, "PCI bus %c error AFAR %#llx AFSR %#llx "
|
|
"PCI CSR %#llx IOMMU %#llx PCI-X %#llx STATUS %#x\n",
|
|
'A' + sc->sc_half, (unsigned long long)afar,
|
|
(unsigned long long)afsr, (unsigned long long)csr,
|
|
(unsigned long long)iommu, (unsigned long long)xstat, status);
|
|
|
|
/* Clear the error bits that we caught. */
|
|
PCIB_WRITE_CONFIG(sc->sc_dev, sc->sc_pci_secbus, STX_CS_DEVICE,
|
|
STX_CS_FUNC, PCIR_STATUS, status, 2);
|
|
SCHIZO_PCI_WRITE_8(sc, STX_PCI_CTRL, csr);
|
|
SCHIZO_PCI_WRITE_8(sc, STX_PCI_AFSR, afsr);
|
|
SCHIZO_PCI_WRITE_8(sc, STX_PCI_IOMMU, iommu);
|
|
if ((sc->sc_flags & SCHIZO_FLAGS_XMODE) != 0)
|
|
SCHIZO_PCI_WRITE_8(sc, XMS_PCI_X_ERR_STAT, xstat);
|
|
|
|
mtx_unlock_spin(sc->sc_mtx);
|
|
|
|
if (fatal != 0)
|
|
panic("%s: fatal PCI bus error",
|
|
device_get_nameunit(sc->sc_dev));
|
|
return (FILTER_HANDLED);
|
|
}
|
|
|
|
static int
|
|
schizo_ue(void *arg)
|
|
{
|
|
struct schizo_softc *sc = arg;
|
|
uint64_t afar, afsr;
|
|
int i;
|
|
|
|
afar = SCHIZO_CTRL_READ_8(sc, STX_CTRL_UE_AFAR);
|
|
for (i = 0; i < 1000; i++)
|
|
if (((afsr = SCHIZO_CTRL_READ_8(sc, STX_CTRL_UE_AFSR)) &
|
|
STX_CTRL_CE_AFSR_ERRPNDG) == 0)
|
|
break;
|
|
panic("%s: uncorrectable DMA error AFAR %#llx AFSR %#llx",
|
|
device_get_nameunit(sc->sc_dev), (unsigned long long)afar,
|
|
(unsigned long long)afsr);
|
|
return (FILTER_HANDLED);
|
|
}
|
|
|
|
static int
|
|
schizo_ce(void *arg)
|
|
{
|
|
struct schizo_softc *sc = arg;
|
|
uint64_t afar, afsr;
|
|
int i;
|
|
|
|
mtx_lock_spin(sc->sc_mtx);
|
|
|
|
afar = SCHIZO_CTRL_READ_8(sc, STX_CTRL_CE_AFAR);
|
|
for (i = 0; i < 1000; i++)
|
|
if (((afsr = SCHIZO_CTRL_READ_8(sc, STX_CTRL_UE_AFSR)) &
|
|
STX_CTRL_CE_AFSR_ERRPNDG) == 0)
|
|
break;
|
|
sc->sc_stats_dma_ce++;
|
|
device_printf(sc->sc_dev,
|
|
"correctable DMA error AFAR %#llx AFSR %#llx\n",
|
|
(unsigned long long)afar, (unsigned long long)afsr);
|
|
|
|
/* Clear the error bits that we caught. */
|
|
SCHIZO_CTRL_WRITE_8(sc, STX_CTRL_UE_AFSR, afsr);
|
|
|
|
mtx_unlock_spin(sc->sc_mtx);
|
|
|
|
return (FILTER_HANDLED);
|
|
}
|
|
|
|
static int
|
|
schizo_host_bus(void *arg)
|
|
{
|
|
struct schizo_softc *sc = arg;
|
|
uint64_t errlog;
|
|
|
|
errlog = SCHIZO_CTRL_READ_8(sc, STX_CTRL_BUS_ERRLOG);
|
|
panic("%s: %s error %#llx", device_get_nameunit(sc->sc_dev),
|
|
sc->sc_mode == SCHIZO_MODE_TOM ? "JBus" : "Safari",
|
|
(unsigned long long)errlog);
|
|
return (FILTER_HANDLED);
|
|
}
|
|
|
|
static int
|
|
schizo_cdma(void *arg)
|
|
{
|
|
struct schizo_softc *sc = arg;
|
|
|
|
atomic_store_rel_32(&sc->sc_cdma_state, SCHIZO_CDMA_STATE_RECEIVED);
|
|
return (FILTER_HANDLED);
|
|
}
|
|
|
|
static void
|
|
schizo_iommu_init(struct schizo_softc *sc, int tsbsize, uint32_t dvmabase)
|
|
{
|
|
|
|
/* Punch in our copies. */
|
|
sc->sc_is.sis_is.is_bustag = rman_get_bustag(sc->sc_mem_res[STX_PCI]);
|
|
sc->sc_is.sis_is.is_bushandle =
|
|
rman_get_bushandle(sc->sc_mem_res[STX_PCI]);
|
|
sc->sc_is.sis_is.is_iommu = STX_PCI_IOMMU;
|
|
sc->sc_is.sis_is.is_dtag = STX_PCI_IOMMU_TLB_TAG_DIAG;
|
|
sc->sc_is.sis_is.is_ddram = STX_PCI_IOMMU_TLB_DATA_DIAG;
|
|
sc->sc_is.sis_is.is_dqueue = STX_PCI_IOMMU_QUEUE_DIAG;
|
|
sc->sc_is.sis_is.is_dva = STX_PCI_IOMMU_SVADIAG;
|
|
sc->sc_is.sis_is.is_dtcmp = STX_PCI_IOMMU_TLB_CMP_DIAG;
|
|
|
|
iommu_init(device_get_nameunit(sc->sc_dev),
|
|
(struct iommu_state *)&sc->sc_is, tsbsize, dvmabase, 0);
|
|
}
|
|
|
|
static int
|
|
schizo_maxslots(device_t dev)
|
|
{
|
|
struct schizo_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
if (sc->sc_mode == SCHIZO_MODE_SCZ)
|
|
return (sc->sc_half == 0 ? 4 : 6);
|
|
|
|
/* XXX: is this correct? */
|
|
return (PCI_SLOTMAX);
|
|
}
|
|
|
|
static uint32_t
|
|
schizo_read_config(device_t dev, u_int bus, u_int slot, u_int func, u_int reg,
|
|
int width)
|
|
{
|
|
struct schizo_softc *sc;
|
|
bus_space_handle_t bh;
|
|
u_long offset = 0;
|
|
uint32_t r, wrd;
|
|
int i;
|
|
uint16_t shrt;
|
|
uint8_t byte;
|
|
|
|
sc = device_get_softc(dev);
|
|
if (bus < sc->sc_pci_secbus || bus > sc->sc_pci_subbus ||
|
|
slot > PCI_SLOTMAX || func > PCI_FUNCMAX || reg > PCI_REGMAX)
|
|
return (-1);
|
|
|
|
/*
|
|
* The Schizo bridges contain a dupe of their header at 0x80.
|
|
*/
|
|
if (sc->sc_mode == SCHIZO_MODE_SCZ && bus == sc->sc_pci_secbus &&
|
|
slot == STX_CS_DEVICE && func == STX_CS_FUNC &&
|
|
reg + width > 0x80)
|
|
return (0);
|
|
|
|
offset = STX_CONF_OFF(bus, slot, func, reg);
|
|
bh = sc->sc_pci_bh[OFW_PCI_CS_CONFIG];
|
|
switch (width) {
|
|
case 1:
|
|
i = bus_space_peek_1(sc->sc_pci_cfgt, bh, offset, &byte);
|
|
r = byte;
|
|
break;
|
|
case 2:
|
|
i = bus_space_peek_2(sc->sc_pci_cfgt, bh, offset, &shrt);
|
|
r = shrt;
|
|
break;
|
|
case 4:
|
|
i = bus_space_peek_4(sc->sc_pci_cfgt, bh, offset, &wrd);
|
|
r = wrd;
|
|
break;
|
|
default:
|
|
panic("%s: bad width", __func__);
|
|
/* NOTREACHED */
|
|
}
|
|
|
|
if (i) {
|
|
#ifdef SCHIZO_DEBUG
|
|
printf("%s: read data error reading: %d.%d.%d: 0x%x\n",
|
|
__func__, bus, slot, func, reg);
|
|
#endif
|
|
r = -1;
|
|
}
|
|
return (r);
|
|
}
|
|
|
|
static void
|
|
schizo_write_config(device_t dev, u_int bus, u_int slot, u_int func,
|
|
u_int reg, uint32_t val, int width)
|
|
{
|
|
struct schizo_softc *sc;
|
|
bus_space_handle_t bh;
|
|
u_long offset = 0;
|
|
|
|
sc = device_get_softc(dev);
|
|
if (bus < sc->sc_pci_secbus || bus > sc->sc_pci_subbus ||
|
|
slot > PCI_SLOTMAX || func > PCI_FUNCMAX || reg > PCI_REGMAX)
|
|
return;
|
|
|
|
offset = STX_CONF_OFF(bus, slot, func, reg);
|
|
bh = sc->sc_pci_bh[OFW_PCI_CS_CONFIG];
|
|
switch (width) {
|
|
case 1:
|
|
bus_space_write_1(sc->sc_pci_cfgt, bh, offset, val);
|
|
break;
|
|
case 2:
|
|
bus_space_write_2(sc->sc_pci_cfgt, bh, offset, val);
|
|
break;
|
|
case 4:
|
|
bus_space_write_4(sc->sc_pci_cfgt, bh, offset, val);
|
|
break;
|
|
default:
|
|
panic("%s: bad width", __func__);
|
|
/* NOTREACHED */
|
|
}
|
|
}
|
|
|
|
static int
|
|
schizo_route_interrupt(device_t bridge, device_t dev, int pin)
|
|
{
|
|
struct schizo_softc *sc;
|
|
struct ofw_pci_register reg;
|
|
ofw_pci_intr_t pintr, mintr;
|
|
uint8_t maskbuf[sizeof(reg) + sizeof(pintr)];
|
|
|
|
sc = device_get_softc(bridge);
|
|
pintr = pin;
|
|
if (ofw_bus_lookup_imap(ofw_bus_get_node(dev), &sc->sc_pci_iinfo,
|
|
®, sizeof(reg), &pintr, sizeof(pintr), &mintr, sizeof(mintr),
|
|
NULL, maskbuf))
|
|
return (mintr);
|
|
|
|
device_printf(bridge, "could not route pin %d for device %d.%d\n",
|
|
pin, pci_get_slot(dev), pci_get_function(dev));
|
|
return (PCI_INVALID_IRQ);
|
|
}
|
|
|
|
static int
|
|
schizo_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
|
|
{
|
|
struct schizo_softc *sc;
|
|
|
|
sc = device_get_softc(dev);
|
|
switch (which) {
|
|
case PCIB_IVAR_DOMAIN:
|
|
*result = device_get_unit(dev);
|
|
return (0);
|
|
case PCIB_IVAR_BUS:
|
|
*result = sc->sc_pci_secbus;
|
|
return (0);
|
|
}
|
|
return (ENOENT);
|
|
}
|
|
|
|
static void
|
|
schizo_dmamap_sync(bus_dma_tag_t dt, bus_dmamap_t map, bus_dmasync_op_t op)
|
|
{
|
|
struct timeval cur, end;
|
|
struct schizo_iommu_state *sis = dt->dt_cookie;
|
|
struct schizo_softc *sc = sis->sis_sc;
|
|
int res;
|
|
|
|
if ((map->dm_flags & DMF_STREAMED) != 0) {
|
|
iommu_dma_methods.dm_dmamap_sync(dt, map, op);
|
|
return;
|
|
}
|
|
|
|
if ((map->dm_flags & DMF_LOADED) == 0)
|
|
return;
|
|
|
|
if ((op & BUS_DMASYNC_POSTREAD) != 0) {
|
|
/*
|
|
* Note that in order to allow this function to be called from
|
|
* filters we would need to use a spin mutex for serialization
|
|
* but given that these disable interrupts we have to emulate
|
|
* one.
|
|
*/
|
|
for (; atomic_cmpset_acq_32(&sc->sc_cdma_state,
|
|
SCHIZO_CDMA_STATE_IDLE, SCHIZO_CDMA_STATE_PENDING) == 0;)
|
|
;
|
|
SCHIZO_PCI_WRITE_8(sc, sc->sc_cdma_clr, INTCLR_RECEIVED);
|
|
microuptime(&cur);
|
|
end.tv_sec = 1;
|
|
end.tv_usec = 0;
|
|
timevaladd(&end, &cur);
|
|
for (; (res = atomic_cmpset_rel_32(&sc->sc_cdma_state,
|
|
SCHIZO_CDMA_STATE_RECEIVED, SCHIZO_CDMA_STATE_IDLE)) ==
|
|
0 && timevalcmp(&cur, &end, <=);)
|
|
microuptime(&cur);
|
|
if (res == 0)
|
|
panic("%s: DMA does not sync", __func__);
|
|
}
|
|
|
|
if ((op & BUS_DMASYNC_PREWRITE) != 0)
|
|
membar(Sync);
|
|
}
|
|
|
|
#define VIS_BLOCKSIZE 64
|
|
|
|
static void
|
|
ichip_dmamap_sync(bus_dma_tag_t dt, bus_dmamap_t map, bus_dmasync_op_t op)
|
|
{
|
|
static u_char buf[VIS_BLOCKSIZE] __aligned(VIS_BLOCKSIZE);
|
|
struct timeval cur, end;
|
|
struct schizo_iommu_state *sis = dt->dt_cookie;
|
|
struct schizo_softc *sc = sis->sis_sc;
|
|
register_t reg, s;
|
|
|
|
if ((map->dm_flags & DMF_STREAMED) != 0) {
|
|
iommu_dma_methods.dm_dmamap_sync(dt, map, op);
|
|
return;
|
|
}
|
|
|
|
if ((map->dm_flags & DMF_LOADED) == 0)
|
|
return;
|
|
|
|
if ((op & BUS_DMASYNC_POSTREAD) != 0) {
|
|
if (sc->sc_mode == SCHIZO_MODE_XMS)
|
|
mtx_lock_spin(&sc->sc_sync_mtx);
|
|
SCHIZO_PCI_WRITE_8(sc, TOMXMS_PCI_DMA_SYNC_PEND,
|
|
sc->sc_sync_val);
|
|
microuptime(&cur);
|
|
end.tv_sec = 1;
|
|
end.tv_usec = 0;
|
|
timevaladd(&end, &cur);
|
|
for (; ((reg = SCHIZO_PCI_READ_8(sc,
|
|
TOMXMS_PCI_DMA_SYNC_PEND)) & sc->sc_sync_val) != 0 &&
|
|
timevalcmp(&cur, &end, <=);)
|
|
microuptime(&cur);
|
|
if ((reg & sc->sc_sync_val) != 0)
|
|
panic("%s: DMA does not sync", __func__);
|
|
if (sc->sc_mode == SCHIZO_MODE_XMS)
|
|
mtx_unlock_spin(&sc->sc_sync_mtx);
|
|
else if ((sc->sc_flags & SCHIZO_FLAGS_BSWAR) != 0) {
|
|
s = intr_disable();
|
|
reg = rd(fprs);
|
|
wr(fprs, reg | FPRS_FEF, 0);
|
|
__asm __volatile("stda %%f0, [%0] %1"
|
|
: : "r" (buf), "n" (ASI_BLK_COMMIT_S));
|
|
membar(Sync);
|
|
wr(fprs, reg, 0);
|
|
intr_restore(s);
|
|
return;
|
|
}
|
|
}
|
|
|
|
if ((op & BUS_DMASYNC_PREWRITE) != 0)
|
|
membar(Sync);
|
|
}
|
|
|
|
static void
|
|
schizo_intr_enable(void *arg)
|
|
{
|
|
struct intr_vector *iv = arg;
|
|
struct schizo_icarg *sica = iv->iv_icarg;
|
|
|
|
SCHIZO_PCI_WRITE_8(sica->sica_sc, sica->sica_map,
|
|
INTMAP_ENABLE(iv->iv_vec, iv->iv_mid));
|
|
}
|
|
|
|
static void
|
|
schizo_intr_disable(void *arg)
|
|
{
|
|
struct intr_vector *iv = arg;
|
|
struct schizo_icarg *sica = iv->iv_icarg;
|
|
|
|
SCHIZO_PCI_WRITE_8(sica->sica_sc, sica->sica_map, iv->iv_vec);
|
|
}
|
|
|
|
static void
|
|
schizo_intr_assign(void *arg)
|
|
{
|
|
struct intr_vector *iv = arg;
|
|
struct schizo_icarg *sica = iv->iv_icarg;
|
|
|
|
SCHIZO_PCI_WRITE_8(sica->sica_sc, sica->sica_map, INTMAP_TID(
|
|
SCHIZO_PCI_READ_8(sica->sica_sc, sica->sica_map), iv->iv_mid));
|
|
}
|
|
|
|
static void
|
|
schizo_intr_clear(void *arg)
|
|
{
|
|
struct intr_vector *iv = arg;
|
|
struct schizo_icarg *sica = iv->iv_icarg;
|
|
|
|
SCHIZO_PCI_WRITE_8(sica->sica_sc, sica->sica_clr, INTCLR_IDLE);
|
|
}
|
|
|
|
static int
|
|
schizo_setup_intr(device_t dev, device_t child, struct resource *ires,
|
|
int flags, driver_filter_t *filt, driver_intr_t *intr, void *arg,
|
|
void **cookiep)
|
|
{
|
|
struct schizo_softc *sc;
|
|
u_long vec;
|
|
int error;
|
|
|
|
sc = device_get_softc(dev);
|
|
/*
|
|
* Make sure the vector is fully specified.
|
|
*/
|
|
vec = rman_get_start(ires);
|
|
if (INTIGN(vec) != sc->sc_ign) {
|
|
device_printf(dev, "invalid interrupt vector 0x%lx\n", vec);
|
|
return (EINVAL);
|
|
}
|
|
|
|
if (intr_vectors[vec].iv_ic == &schizo_ic) {
|
|
/*
|
|
* Ensure we use the right softc in case the interrupt
|
|
* is routed to our companion PBM for some odd reason.
|
|
*/
|
|
sc = ((struct schizo_icarg *)intr_vectors[vec].iv_icarg)->
|
|
sica_sc;
|
|
} else if (intr_vectors[vec].iv_ic == NULL) {
|
|
/*
|
|
* Work around broken firmware which misses entries in
|
|
* the ino-bitmap.
|
|
*/
|
|
error = schizo_intr_register(sc, INTINO(vec));
|
|
if (error != 0) {
|
|
device_printf(dev, "could not register interrupt "
|
|
"controller for vector 0x%lx (%d)\n", vec, error);
|
|
return (error);
|
|
}
|
|
if (bootverbose)
|
|
device_printf(dev, "belatedly registered as "
|
|
"interrupt controller for vector 0x%lx\n", vec);
|
|
} else {
|
|
device_printf(dev,
|
|
"invalid interrupt controller for vector 0x%lx\n", vec);
|
|
return (EINVAL);
|
|
}
|
|
return (bus_generic_setup_intr(dev, child, ires, flags, filt, intr,
|
|
arg, cookiep));
|
|
}
|
|
|
|
static struct resource *
|
|
schizo_alloc_resource(device_t bus, device_t child, int type, int *rid,
|
|
u_long start, u_long end, u_long count, u_int flags)
|
|
{
|
|
struct schizo_softc *sc;
|
|
struct resource *rv;
|
|
struct rman *rm;
|
|
bus_space_tag_t bt;
|
|
bus_space_handle_t bh;
|
|
int needactivate = flags & RF_ACTIVE;
|
|
|
|
flags &= ~RF_ACTIVE;
|
|
|
|
sc = device_get_softc(bus);
|
|
if (type == SYS_RES_IRQ) {
|
|
/*
|
|
* XXX: Don't accept blank ranges for now, only single
|
|
* interrupts. The other case should not happen with
|
|
* the MI PCI code...
|
|
* XXX: This may return a resource that is out of the
|
|
* range that was specified. Is this correct...?
|
|
*/
|
|
if (start != end)
|
|
panic("%s: XXX: interrupt range", __func__);
|
|
start = end = INTMAP_VEC(sc->sc_ign, end);
|
|
return (BUS_ALLOC_RESOURCE(device_get_parent(bus), child,
|
|
type, rid, start, end, count, flags));
|
|
}
|
|
switch (type) {
|
|
case SYS_RES_MEMORY:
|
|
rm = &sc->sc_pci_mem_rman;
|
|
bt = sc->sc_pci_memt;
|
|
bh = sc->sc_pci_bh[OFW_PCI_CS_MEM32];
|
|
break;
|
|
case SYS_RES_IOPORT:
|
|
rm = &sc->sc_pci_io_rman;
|
|
bt = sc->sc_pci_iot;
|
|
bh = sc->sc_pci_bh[OFW_PCI_CS_IO];
|
|
break;
|
|
default:
|
|
return (NULL);
|
|
/* NOTREACHED */
|
|
}
|
|
|
|
rv = rman_reserve_resource(rm, start, end, count, flags, child);
|
|
if (rv == NULL)
|
|
return (NULL);
|
|
rman_set_rid(rv, *rid);
|
|
bh += rman_get_start(rv);
|
|
rman_set_bustag(rv, bt);
|
|
rman_set_bushandle(rv, bh);
|
|
|
|
if (needactivate) {
|
|
if (bus_activate_resource(child, type, *rid, rv)) {
|
|
rman_release_resource(rv);
|
|
return (NULL);
|
|
}
|
|
}
|
|
return (rv);
|
|
}
|
|
|
|
static int
|
|
schizo_activate_resource(device_t bus, device_t child, int type, int rid,
|
|
struct resource *r)
|
|
{
|
|
void *p;
|
|
int error;
|
|
|
|
if (type == SYS_RES_IRQ)
|
|
return (BUS_ACTIVATE_RESOURCE(device_get_parent(bus), child,
|
|
type, rid, r));
|
|
if (type == SYS_RES_MEMORY) {
|
|
/*
|
|
* Need to memory-map the device space, as some drivers
|
|
* depend on the virtual address being set and usable.
|
|
*/
|
|
error = sparc64_bus_mem_map(rman_get_bustag(r),
|
|
rman_get_bushandle(r), rman_get_size(r), 0, 0, &p);
|
|
if (error != 0)
|
|
return (error);
|
|
rman_set_virtual(r, p);
|
|
}
|
|
return (rman_activate_resource(r));
|
|
}
|
|
|
|
static int
|
|
schizo_deactivate_resource(device_t bus, device_t child, int type, int rid,
|
|
struct resource *r)
|
|
{
|
|
|
|
if (type == SYS_RES_IRQ)
|
|
return (BUS_DEACTIVATE_RESOURCE(device_get_parent(bus), child,
|
|
type, rid, r));
|
|
if (type == SYS_RES_MEMORY) {
|
|
sparc64_bus_mem_unmap(rman_get_virtual(r), rman_get_size(r));
|
|
rman_set_virtual(r, NULL);
|
|
}
|
|
return (rman_deactivate_resource(r));
|
|
}
|
|
|
|
static int
|
|
schizo_release_resource(device_t bus, device_t child, int type, int rid,
|
|
struct resource *r)
|
|
{
|
|
int error;
|
|
|
|
if (type == SYS_RES_IRQ)
|
|
return (BUS_RELEASE_RESOURCE(device_get_parent(bus), child,
|
|
type, rid, r));
|
|
if (rman_get_flags(r) & RF_ACTIVE) {
|
|
error = bus_deactivate_resource(child, type, rid, r);
|
|
if (error)
|
|
return (error);
|
|
}
|
|
return (rman_release_resource(r));
|
|
}
|
|
|
|
static bus_dma_tag_t
|
|
schizo_get_dma_tag(device_t bus, device_t child __unused)
|
|
{
|
|
struct schizo_softc *sc;
|
|
|
|
sc = device_get_softc(bus);
|
|
return (sc->sc_pci_dmat);
|
|
}
|
|
|
|
static phandle_t
|
|
schizo_get_node(device_t bus, device_t child __unused)
|
|
{
|
|
struct schizo_softc *sc;
|
|
|
|
sc = device_get_softc(bus);
|
|
/* We only have one child, the PCI bus, which needs our own node. */
|
|
return (sc->sc_node);
|
|
}
|
|
|
|
static void
|
|
schizo_setup_device(device_t bus, device_t child)
|
|
{
|
|
struct schizo_softc *sc;
|
|
uint64_t reg;
|
|
int capreg;
|
|
|
|
sc = device_get_softc(bus);
|
|
/*
|
|
* Disable bus parking in order to work around a bus hang caused by
|
|
* Casinni/Skyhawk combinations.
|
|
*/
|
|
if (OF_getproplen(ofw_bus_get_node(child), "pci-req-removal") >= 0)
|
|
SCHIZO_PCI_SET(sc, STX_PCI_CTRL, SCHIZO_PCI_READ_8(sc,
|
|
STX_PCI_CTRL) & ~STX_PCI_CTRL_ARB_PARK);
|
|
|
|
if (sc->sc_mode == SCHIZO_MODE_XMS) {
|
|
/* XMITS NCPQ WAR: set outstanding split transactions to 1. */
|
|
if ((sc->sc_flags & SCHIZO_FLAGS_XMODE) != 0 &&
|
|
(pci_read_config(child, PCIR_HDRTYPE, 1) &
|
|
PCIM_HDRTYPE) != PCIM_HDRTYPE_BRIDGE &&
|
|
pci_find_cap(child, PCIY_PCIX, &capreg) == 0)
|
|
pci_write_config(child, capreg + PCIXR_COMMAND,
|
|
pci_read_config(child, capreg + PCIXR_COMMAND,
|
|
2) & 0x7c, 2);
|
|
/* XMITS 3.x WAR: set BUGCNTL iff value is unexpected. */
|
|
if (sc->sc_mrev >= 4) {
|
|
reg = ((sc->sc_flags & SCHIZO_FLAGS_XMODE) != 0 ?
|
|
0xa0UL : 0xffUL) << XMS_PCI_X_DIAG_BUGCNTL_SHIFT;
|
|
if ((SCHIZO_PCI_READ_8(sc, XMS_PCI_X_DIAG) &
|
|
XMS_PCI_X_DIAG_BUGCNTL_MASK) != reg)
|
|
SCHIZO_PCI_SET(sc, XMS_PCI_X_DIAG, reg);
|
|
}
|
|
}
|
|
}
|
|
|
|
static bus_space_tag_t
|
|
schizo_alloc_bus_tag(struct schizo_softc *sc, int type)
|
|
{
|
|
bus_space_tag_t bt;
|
|
|
|
bt = malloc(sizeof(struct bus_space_tag), M_DEVBUF,
|
|
M_NOWAIT | M_ZERO);
|
|
if (bt == NULL)
|
|
panic("%s: out of memory", __func__);
|
|
|
|
bt->bst_cookie = sc;
|
|
bt->bst_parent = rman_get_bustag(sc->sc_mem_res[STX_PCI]);
|
|
bt->bst_type = type;
|
|
return (bt);
|
|
}
|
|
|
|
static u_int
|
|
schizo_get_timecount(struct timecounter *tc)
|
|
{
|
|
struct schizo_softc *sc;
|
|
|
|
sc = tc->tc_priv;
|
|
return (SCHIZO_CTRL_READ_8(sc, STX_CTRL_PERF_CNT) &
|
|
(STX_CTRL_PERF_CNT_MASK << STX_CTRL_PERF_CNT_CNT0_SHIFT));
|
|
}
|