freebsd-skq/sys/dev/ata/chipsets/ata-cyrix.c
marius cc444f6cf5 - First pass at const'ifying ata(4) as appropriate.
- Use DEVMETHOD_END.
- Use NULL instead of 0 for pointers

MFC after:	1 week
2012-03-21 16:59:39 +00:00

135 lines
4.3 KiB
C

/*-
* Copyright (c) 1998 - 2008 Søren Schmidt <sos@FreeBSD.org>
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_ata.h"
#include <sys/param.h>
#include <sys/module.h>
#include <sys/systm.h>
#include <sys/kernel.h>
#include <sys/ata.h>
#include <sys/bus.h>
#include <sys/endian.h>
#include <sys/malloc.h>
#include <sys/lock.h>
#include <sys/mutex.h>
#include <sys/sema.h>
#include <sys/taskqueue.h>
#include <vm/uma.h>
#include <machine/stdarg.h>
#include <machine/resource.h>
#include <machine/bus.h>
#include <sys/rman.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <dev/ata/ata-all.h>
#include <dev/ata/ata-pci.h>
#include <ata_if.h>
/* local prototypes */
static int ata_cyrix_chipinit(device_t dev);
static int ata_cyrix_ch_attach(device_t dev);
static int ata_cyrix_setmode(device_t dev, int target, int mode);
/*
* Cyrix chipset support functions
*/
static int
ata_cyrix_probe(device_t dev)
{
struct ata_pci_controller *ctlr = device_get_softc(dev);
if (pci_get_devid(dev) == ATA_CYRIX_5530) {
device_set_desc(dev, "Cyrix 5530 ATA33 controller");
ctlr->chipinit = ata_cyrix_chipinit;
return (BUS_PROBE_DEFAULT);
}
return ENXIO;
}
static int
ata_cyrix_chipinit(device_t dev)
{
struct ata_pci_controller *ctlr = device_get_softc(dev);
if (ata_setup_interrupt(dev, ata_generic_intr))
return ENXIO;
ctlr->ch_attach = ata_cyrix_ch_attach;
ctlr->setmode = ata_cyrix_setmode;
return 0;
}
static int
ata_cyrix_ch_attach(device_t dev)
{
struct ata_channel *ch = device_get_softc(dev);
ch->dma.alignment = 16;
ch->dma.max_iosize = 64 * DEV_BSIZE;
return (ata_pci_ch_attach(dev));
}
static int
ata_cyrix_setmode(device_t dev, int target, int mode)
{
struct ata_pci_controller *ctlr = device_get_softc(device_get_parent(dev));
struct ata_channel *ch = device_get_softc(dev);
int devno = (ch->unit << 1) + target;
int piomode;
static const uint32_t piotiming[] =
{ 0x00009172, 0x00012171, 0x00020080, 0x00032010, 0x00040010 };
static const uint32_t dmatiming[] =
{ 0x00077771, 0x00012121, 0x00002020 };
static const uint32_t udmatiming[] =
{ 0x00921250, 0x00911140, 0x00911030 };
mode = min(mode, ATA_UDMA2);
/* dont try to set the mode if we dont have the resource */
if (ctlr->r_res1) {
if (mode >= ATA_UDMA0) {
/* Set UDMA timings, and PIO4. */
ATA_OUTL(ch->r_io[ATA_BMCMD_PORT].res,
0x24 + (devno << 3), udmatiming[mode & ATA_MODE_MASK]);
piomode = ATA_PIO4;
} else if (mode >= ATA_WDMA0) {
/* Set WDMA timings, and respective PIO mode. */
ATA_OUTL(ch->r_io[ATA_BMCMD_PORT].res,
0x24 + (devno << 3), dmatiming[mode & ATA_MODE_MASK]);
piomode = (mode == ATA_WDMA0) ? ATA_PIO0 :
(mode == ATA_WDMA1) ? ATA_PIO3 : ATA_PIO4;
} else
piomode = mode;
/* Set PIO mode calculated above. */
ATA_OUTL(ch->r_io[ATA_BMCMD_PORT].res,
0x20 + (devno << 3), piotiming[ata_mode2idx(piomode)]);
}
return (mode);
}
ATA_DECLARE_DRIVER(ata_cyrix);