freebsd-skq/sys/dev/acpica/acpi_pcib_pci.c
John Baldwin 5fe82bca57 Expand the MSI/MSI-X API to address some deficiencies in the MSI-X support.
- First off, device drivers really do need to know if they are allocating
  MSI or MSI-X messages.  MSI requires allocating powerof2() messages for
  example where MSI-X does not.  To address this, split out the MSI-X
  support from pci_msi_count() and pci_alloc_msi() into new driver-visible
  functions pci_msix_count() and pci_alloc_msix().  As a result,
  pci_msi_count() now just returns a count of the max supported MSI
  messages for the device, and pci_alloc_msi() only tries to allocate MSI
  messages.  To get a count of the max supported MSI-X messages, use
  pci_msix_count().  To allocate MSI-X messages, use pci_alloc_msix().
  pci_release_msi() still handles both MSI and MSI-X messages, however.
  As a result of this change, drivers using the existing API will only
  use MSI messages and will no longer try to use MSI-X messages.
- Because MSI-X allows for each message to have its own data and address
  values (and thus does not require all of the messages to have their
  MD vectors allocated as a group), some devices allow for "sparse" use
  of MSI-X message slots.  For example, if a device supports 8 messages
  but the OS is only able to allocate 2 messages, the device may make the
  best use of 2 IRQs if it enables the messages at slots 1 and 4 rather
  than default of using the first N slots (or indicies) at 1 and 2.  To
  support this, add a new pci_remap_msix() function that a driver may call
  after a successful pci_alloc_msix() (but before allocating any of the
  SYS_RES_IRQ resources) to allow the allocated IRQ resources to be
  assigned to different message indices.  For example, from the earlier
  example, after pci_alloc_msix() returned a value of 2, the driver would
  call pci_remap_msix() passing in array of integers { 1, 4 } as the
  new message indices to use.  The rid's for the SYS_RES_IRQ resources
  will always match the message indices.  Thus, after the call to
  pci_remap_msix() the driver would be able to access the first message
  in slot 1 at SYS_RES_IRQ rid 1, and the second message at slot 4 at
  SYS_RES_IRQ rid 4.  Note that the message slots/indices are 1-based
  rather than 0-based so that they will always correspond to the rid
  values (SYS_RES_IRQ rid 0 is reserved for the legacy INTx interrupt).
  To support this API, a new PCIB_REMAP_MSIX() method was added to the
  pcib interface to change the message index for a single IRQ.

Tested by:	scottl
2007-01-22 21:48:44 +00:00

178 lines
5.5 KiB
C

/*-
* Copyright (c) 2000 Michael Smith
* Copyright (c) 2000 BSDi
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*/
#include <sys/cdefs.h>
__FBSDID("$FreeBSD$");
#include "opt_acpi.h"
#include <sys/param.h>
#include <sys/bus.h>
#include <sys/kernel.h>
#include <sys/malloc.h>
#include <sys/module.h>
#include <contrib/dev/acpica/acpi.h>
#include <dev/acpica/acpivar.h>
#include <dev/acpica/acpi_pcibvar.h>
#include <machine/pci_cfgreg.h>
#include <dev/pci/pcivar.h>
#include <dev/pci/pcireg.h>
#include <dev/pci/pcib_private.h>
#include "pcib_if.h"
/* Hooks for the ACPI CA debugging infrastructure. */
#define _COMPONENT ACPI_BUS
ACPI_MODULE_NAME("PCI_PCI")
struct acpi_pcib_softc {
struct pcib_softc ap_pcibsc;
ACPI_HANDLE ap_handle;
ACPI_BUFFER ap_prt; /* interrupt routing table */
};
struct acpi_pcib_lookup_info {
UINT32 address;
ACPI_HANDLE handle;
};
static int acpi_pcib_pci_probe(device_t bus);
static int acpi_pcib_pci_attach(device_t bus);
static int acpi_pcib_pci_resume(device_t bus);
static int acpi_pcib_read_ivar(device_t dev, device_t child,
int which, uintptr_t *result);
static int acpi_pcib_pci_route_interrupt(device_t pcib,
device_t dev, int pin);
static device_method_t acpi_pcib_pci_methods[] = {
/* Device interface */
DEVMETHOD(device_probe, acpi_pcib_pci_probe),
DEVMETHOD(device_attach, acpi_pcib_pci_attach),
DEVMETHOD(device_shutdown, bus_generic_shutdown),
DEVMETHOD(device_suspend, bus_generic_suspend),
DEVMETHOD(device_resume, acpi_pcib_pci_resume),
/* Bus interface */
DEVMETHOD(bus_print_child, bus_generic_print_child),
DEVMETHOD(bus_read_ivar, acpi_pcib_read_ivar),
DEVMETHOD(bus_write_ivar, pcib_write_ivar),
DEVMETHOD(bus_alloc_resource, pcib_alloc_resource),
DEVMETHOD(bus_release_resource, bus_generic_release_resource),
DEVMETHOD(bus_activate_resource, bus_generic_activate_resource),
DEVMETHOD(bus_deactivate_resource, bus_generic_deactivate_resource),
DEVMETHOD(bus_setup_intr, bus_generic_setup_intr),
DEVMETHOD(bus_teardown_intr, bus_generic_teardown_intr),
/* pcib interface */
DEVMETHOD(pcib_maxslots, pcib_maxslots),
DEVMETHOD(pcib_read_config, pcib_read_config),
DEVMETHOD(pcib_write_config, pcib_write_config),
DEVMETHOD(pcib_route_interrupt, acpi_pcib_pci_route_interrupt),
DEVMETHOD(pcib_alloc_msi, pcib_alloc_msi),
DEVMETHOD(pcib_release_msi, pcib_release_msi),
DEVMETHOD(pcib_alloc_msix, pcib_alloc_msix),
DEVMETHOD(pcib_remap_msix, pcib_remap_msix),
DEVMETHOD(pcib_release_msix, pcib_release_msix),
{0, 0}
};
static devclass_t pcib_devclass;
DEFINE_CLASS_0(pcib, acpi_pcib_pci_driver, acpi_pcib_pci_methods,
sizeof(struct acpi_pcib_softc));
DRIVER_MODULE(acpi_pcib, pci, acpi_pcib_pci_driver, pcib_devclass, 0, 0);
MODULE_DEPEND(acpi_pcib, acpi, 1, 1, 1);
static int
acpi_pcib_pci_probe(device_t dev)
{
if (pci_get_class(dev) != PCIC_BRIDGE ||
pci_get_subclass(dev) != PCIS_BRIDGE_PCI ||
acpi_disabled("pci"))
return (ENXIO);
if (acpi_get_handle(dev) == NULL)
return (ENXIO);
if (pci_cfgregopen() == 0)
return (ENXIO);
device_set_desc(dev, "ACPI PCI-PCI bridge");
return (-1000);
}
static int
acpi_pcib_pci_attach(device_t dev)
{
struct acpi_pcib_softc *sc;
ACPI_FUNCTION_TRACE((char *)(uintptr_t)__func__);
pcib_attach_common(dev);
sc = device_get_softc(dev);
sc->ap_handle = acpi_get_handle(dev);
return (acpi_pcib_attach(dev, &sc->ap_prt, sc->ap_pcibsc.secbus));
}
static int
acpi_pcib_pci_resume(device_t dev)
{
return (acpi_pcib_resume(dev));
}
static int
acpi_pcib_read_ivar(device_t dev, device_t child, int which, uintptr_t *result)
{
struct acpi_pcib_softc *sc = device_get_softc(dev);
switch (which) {
case ACPI_IVAR_HANDLE:
*result = (uintptr_t)sc->ap_handle;
return (0);
}
return (pcib_read_ivar(dev, child, which, result));
}
static int
acpi_pcib_pci_route_interrupt(device_t pcib, device_t dev, int pin)
{
struct acpi_pcib_softc *sc;
sc = device_get_softc(pcib);
/*
* If we don't have a _PRT, fall back to the swizzle method
* for routing interrupts.
*/
if (sc->ap_prt.Pointer == NULL)
return (pcib_route_interrupt(pcib, dev, pin));
else
return (acpi_pcib_route_interrupt(pcib, dev, pin, &sc->ap_prt));
}