405ada37fb
This is needed with the pl011 driver. Before this change it would default to a shift of 0, however the hardware places the registers at 4-byte addresses meaning the value should be 2. This patch fixes this for the pl011 when configured using the fdt. The other drivers have a default value of 0 to keep this a no-op. MFC after: 1 week
739 lines
17 KiB
C
739 lines
17 KiB
C
/*-
|
|
* Copyright (c) 2013 Adrian Chadd <adrian@FreeBSD.org>
|
|
* All rights reserved.
|
|
*
|
|
* Redistribution and use in source and binary forms, with or without
|
|
* modification, are permitted provided that the following conditions
|
|
* are met:
|
|
*
|
|
* 1. Redistributions of source code must retain the above copyright
|
|
* notice, this list of conditions and the following disclaimer.
|
|
* 2. Redistributions in binary form must reproduce the above copyright
|
|
* notice, this list of conditions and the following disclaimer in the
|
|
* documentation and/or other materials provided with the distribution.
|
|
*
|
|
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
|
|
* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
|
|
* OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
|
|
* IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
|
|
* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
|
|
* NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
|
|
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
|
|
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
|
|
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
|
|
* THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
|
*/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/conf.h>
|
|
#include <machine/bus.h>
|
|
|
|
#include <dev/uart/uart.h>
|
|
#include <dev/uart/uart_cpu.h>
|
|
#include <dev/uart/uart_bus.h>
|
|
|
|
#include <mips/atheros/ar933x_uart.h>
|
|
|
|
#include "uart_if.h"
|
|
|
|
/*
|
|
* Default system clock is 25MHz; see ar933x_chip.c for how
|
|
* the startup process determines whether it's 25MHz or 40MHz.
|
|
*/
|
|
#define DEFAULT_RCLK (25 * 1000 * 1000)
|
|
|
|
#define ar933x_getreg(bas, reg) \
|
|
bus_space_read_4((bas)->bst, (bas)->bsh, reg)
|
|
#define ar933x_setreg(bas, reg, value) \
|
|
bus_space_write_4((bas)->bst, (bas)->bsh, reg, value)
|
|
|
|
|
|
|
|
static int
|
|
ar933x_drain(struct uart_bas *bas, int what)
|
|
{
|
|
int limit;
|
|
|
|
if (what & UART_DRAIN_TRANSMITTER) {
|
|
limit = 10*1024;
|
|
|
|
/* Loop over until the TX FIFO shows entirely clear */
|
|
while (--limit) {
|
|
if ((ar933x_getreg(bas, AR933X_UART_CS_REG)
|
|
& AR933X_UART_CS_TX_BUSY) == 0)
|
|
break;
|
|
}
|
|
if (limit == 0) {
|
|
return (EIO);
|
|
}
|
|
}
|
|
|
|
if (what & UART_DRAIN_RECEIVER) {
|
|
limit=10*4096;
|
|
while (--limit) {
|
|
|
|
/* XXX duplicated from ar933x_getc() */
|
|
/* XXX TODO: refactor! */
|
|
|
|
/* If there's nothing to read, stop! */
|
|
if ((ar933x_getreg(bas, AR933X_UART_DATA_REG) &
|
|
AR933X_UART_DATA_RX_CSR) == 0) {
|
|
break;
|
|
}
|
|
|
|
/* Read the top of the RX FIFO */
|
|
(void) ar933x_getreg(bas, AR933X_UART_DATA_REG);
|
|
|
|
/* Remove that entry from said RX FIFO */
|
|
ar933x_setreg(bas, AR933X_UART_DATA_REG,
|
|
AR933X_UART_DATA_RX_CSR);
|
|
|
|
uart_barrier(bas);
|
|
DELAY(2);
|
|
}
|
|
if (limit == 0) {
|
|
return (EIO);
|
|
}
|
|
}
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Calculate the baud from the given chip configuration parameters.
|
|
*/
|
|
static unsigned long
|
|
ar933x_uart_get_baud(unsigned int clk, unsigned int scale,
|
|
unsigned int step)
|
|
{
|
|
uint64_t t;
|
|
uint32_t div;
|
|
|
|
div = (2 << 16) * (scale + 1);
|
|
t = clk;
|
|
t *= step;
|
|
t += (div / 2);
|
|
t = t / div;
|
|
|
|
return (t);
|
|
}
|
|
|
|
/*
|
|
* Calculate the scale/step with the lowest possible deviation from
|
|
* the target baudrate.
|
|
*/
|
|
static void
|
|
ar933x_uart_get_scale_step(struct uart_bas *bas, unsigned int baud,
|
|
unsigned int *scale, unsigned int *step)
|
|
{
|
|
unsigned int tscale;
|
|
uint32_t clk;
|
|
long min_diff;
|
|
|
|
clk = bas->rclk;
|
|
*scale = 0;
|
|
*step = 0;
|
|
|
|
min_diff = baud;
|
|
for (tscale = 0; tscale < AR933X_UART_MAX_SCALE; tscale++) {
|
|
uint64_t tstep;
|
|
int diff;
|
|
|
|
tstep = baud * (tscale + 1);
|
|
tstep *= (2 << 16);
|
|
tstep = tstep / clk;
|
|
|
|
if (tstep > AR933X_UART_MAX_STEP)
|
|
break;
|
|
|
|
diff = abs(ar933x_uart_get_baud(clk, tscale, tstep) - baud);
|
|
if (diff < min_diff) {
|
|
min_diff = diff;
|
|
*scale = tscale;
|
|
*step = tstep;
|
|
}
|
|
}
|
|
}
|
|
|
|
static int
|
|
ar933x_param(struct uart_bas *bas, int baudrate, int databits, int stopbits,
|
|
int parity)
|
|
{
|
|
/* UART always 8 bits */
|
|
|
|
/* UART always 1 stop bit */
|
|
|
|
/* UART parity is controllable by bits 0:1, ignore for now */
|
|
|
|
/* Set baudrate if required. */
|
|
if (baudrate > 0) {
|
|
uint32_t clock_scale, clock_step;
|
|
|
|
/* Find the best fit for the given baud rate */
|
|
ar933x_uart_get_scale_step(bas, baudrate, &clock_scale,
|
|
&clock_step);
|
|
|
|
/*
|
|
* Program the clock register in its entirety - no need
|
|
* for Read-Modify-Write.
|
|
*/
|
|
ar933x_setreg(bas, AR933X_UART_CLOCK_REG,
|
|
((clock_scale & AR933X_UART_CLOCK_SCALE_M)
|
|
<< AR933X_UART_CLOCK_SCALE_S) |
|
|
(clock_step & AR933X_UART_CLOCK_STEP_M));
|
|
}
|
|
|
|
uart_barrier(bas);
|
|
return (0);
|
|
}
|
|
|
|
|
|
/*
|
|
* Low-level UART interface.
|
|
*/
|
|
static int ar933x_probe(struct uart_bas *bas);
|
|
static void ar933x_init(struct uart_bas *bas, int, int, int, int);
|
|
static void ar933x_term(struct uart_bas *bas);
|
|
static void ar933x_putc(struct uart_bas *bas, int);
|
|
static int ar933x_rxready(struct uart_bas *bas);
|
|
static int ar933x_getc(struct uart_bas *bas, struct mtx *);
|
|
|
|
static struct uart_ops uart_ar933x_ops = {
|
|
.probe = ar933x_probe,
|
|
.init = ar933x_init,
|
|
.term = ar933x_term,
|
|
.putc = ar933x_putc,
|
|
.rxready = ar933x_rxready,
|
|
.getc = ar933x_getc,
|
|
};
|
|
|
|
static int
|
|
ar933x_probe(struct uart_bas *bas)
|
|
{
|
|
|
|
/* We always know this will be here */
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ar933x_init(struct uart_bas *bas, int baudrate, int databits, int stopbits,
|
|
int parity)
|
|
{
|
|
uint32_t reg;
|
|
|
|
/* Setup default parameters */
|
|
ar933x_param(bas, baudrate, databits, stopbits, parity);
|
|
|
|
/* XXX Force enable UART in case it was disabled */
|
|
|
|
/* Disable all interrupts */
|
|
ar933x_setreg(bas, AR933X_UART_INT_EN_REG, 0x00000000);
|
|
|
|
/* Disable the host interrupt */
|
|
reg = ar933x_getreg(bas, AR933X_UART_CS_REG);
|
|
reg &= ~AR933X_UART_CS_HOST_INT_EN;
|
|
ar933x_setreg(bas, AR933X_UART_CS_REG, reg);
|
|
|
|
uart_barrier(bas);
|
|
|
|
/* XXX Set RTS/DTR? */
|
|
}
|
|
|
|
/*
|
|
* Detach from console.
|
|
*/
|
|
static void
|
|
ar933x_term(struct uart_bas *bas)
|
|
{
|
|
|
|
/* XXX TODO */
|
|
}
|
|
|
|
static void
|
|
ar933x_putc(struct uart_bas *bas, int c)
|
|
{
|
|
int limit;
|
|
|
|
limit = 250000;
|
|
|
|
/* Wait for space in the TX FIFO */
|
|
while ( ((ar933x_getreg(bas, AR933X_UART_DATA_REG) &
|
|
AR933X_UART_DATA_TX_CSR) == 0) && --limit)
|
|
DELAY(4);
|
|
|
|
/* Write the actual byte */
|
|
ar933x_setreg(bas, AR933X_UART_DATA_REG,
|
|
(c & 0xff) | AR933X_UART_DATA_TX_CSR);
|
|
}
|
|
|
|
static int
|
|
ar933x_rxready(struct uart_bas *bas)
|
|
{
|
|
|
|
/* Wait for a character to come ready */
|
|
return (!!(ar933x_getreg(bas, AR933X_UART_DATA_REG)
|
|
& AR933X_UART_DATA_RX_CSR));
|
|
}
|
|
|
|
static int
|
|
ar933x_getc(struct uart_bas *bas, struct mtx *hwmtx)
|
|
{
|
|
int c;
|
|
|
|
uart_lock(hwmtx);
|
|
|
|
/* Wait for a character to come ready */
|
|
while ((ar933x_getreg(bas, AR933X_UART_DATA_REG) &
|
|
AR933X_UART_DATA_RX_CSR) == 0) {
|
|
uart_unlock(hwmtx);
|
|
DELAY(4);
|
|
uart_lock(hwmtx);
|
|
}
|
|
|
|
/* Read the top of the RX FIFO */
|
|
c = ar933x_getreg(bas, AR933X_UART_DATA_REG) & 0xff;
|
|
|
|
/* Remove that entry from said RX FIFO */
|
|
ar933x_setreg(bas, AR933X_UART_DATA_REG, AR933X_UART_DATA_RX_CSR);
|
|
|
|
uart_unlock(hwmtx);
|
|
|
|
return (c);
|
|
}
|
|
|
|
/*
|
|
* High-level UART interface.
|
|
*/
|
|
struct ar933x_softc {
|
|
struct uart_softc base;
|
|
|
|
uint32_t u_ier;
|
|
};
|
|
|
|
static int ar933x_bus_attach(struct uart_softc *);
|
|
static int ar933x_bus_detach(struct uart_softc *);
|
|
static int ar933x_bus_flush(struct uart_softc *, int);
|
|
static int ar933x_bus_getsig(struct uart_softc *);
|
|
static int ar933x_bus_ioctl(struct uart_softc *, int, intptr_t);
|
|
static int ar933x_bus_ipend(struct uart_softc *);
|
|
static int ar933x_bus_param(struct uart_softc *, int, int, int, int);
|
|
static int ar933x_bus_probe(struct uart_softc *);
|
|
static int ar933x_bus_receive(struct uart_softc *);
|
|
static int ar933x_bus_setsig(struct uart_softc *, int);
|
|
static int ar933x_bus_transmit(struct uart_softc *);
|
|
static void ar933x_bus_grab(struct uart_softc *);
|
|
static void ar933x_bus_ungrab(struct uart_softc *);
|
|
|
|
static kobj_method_t ar933x_methods[] = {
|
|
KOBJMETHOD(uart_attach, ar933x_bus_attach),
|
|
KOBJMETHOD(uart_detach, ar933x_bus_detach),
|
|
KOBJMETHOD(uart_flush, ar933x_bus_flush),
|
|
KOBJMETHOD(uart_getsig, ar933x_bus_getsig),
|
|
KOBJMETHOD(uart_ioctl, ar933x_bus_ioctl),
|
|
KOBJMETHOD(uart_ipend, ar933x_bus_ipend),
|
|
KOBJMETHOD(uart_param, ar933x_bus_param),
|
|
KOBJMETHOD(uart_probe, ar933x_bus_probe),
|
|
KOBJMETHOD(uart_receive, ar933x_bus_receive),
|
|
KOBJMETHOD(uart_setsig, ar933x_bus_setsig),
|
|
KOBJMETHOD(uart_transmit, ar933x_bus_transmit),
|
|
KOBJMETHOD(uart_grab, ar933x_bus_grab),
|
|
KOBJMETHOD(uart_ungrab, ar933x_bus_ungrab),
|
|
{ 0, 0 }
|
|
};
|
|
|
|
struct uart_class uart_ar933x_class = {
|
|
"ar933x",
|
|
ar933x_methods,
|
|
sizeof(struct ar933x_softc),
|
|
.uc_ops = &uart_ar933x_ops,
|
|
.uc_range = 8,
|
|
.uc_rclk = DEFAULT_RCLK,
|
|
.uc_rshift = 0
|
|
};
|
|
|
|
#define SIGCHG(c, i, s, d) \
|
|
if (c) { \
|
|
i |= (i & s) ? s : s | d; \
|
|
} else { \
|
|
i = (i & s) ? (i & ~s) | d : i; \
|
|
}
|
|
|
|
static int
|
|
ar933x_bus_attach(struct uart_softc *sc)
|
|
{
|
|
struct ar933x_softc *u = (struct ar933x_softc *)sc;
|
|
struct uart_bas *bas = &sc->sc_bas;
|
|
uint32_t reg;
|
|
|
|
/* XXX TODO: flush transmitter */
|
|
|
|
/*
|
|
* Setup initial interrupt notifications.
|
|
*
|
|
* XXX for now, just RX FIFO valid.
|
|
* Later on (when they're handled), also handle
|
|
* RX errors/overflow.
|
|
*/
|
|
u->u_ier = AR933X_UART_INT_RX_VALID;
|
|
|
|
/* Enable RX interrupts to kick-start things */
|
|
ar933x_setreg(bas, AR933X_UART_INT_EN_REG, u->u_ier);
|
|
|
|
/* Enable the host interrupt now */
|
|
reg = ar933x_getreg(bas, AR933X_UART_CS_REG);
|
|
reg |= AR933X_UART_CS_HOST_INT_EN;
|
|
ar933x_setreg(bas, AR933X_UART_CS_REG, reg);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ar933x_bus_detach(struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas = &sc->sc_bas;
|
|
uint32_t reg;
|
|
|
|
/* Disable all interrupts */
|
|
ar933x_setreg(bas, AR933X_UART_INT_EN_REG, 0x00000000);
|
|
|
|
/* Disable the host interrupt */
|
|
reg = ar933x_getreg(bas, AR933X_UART_CS_REG);
|
|
reg &= ~AR933X_UART_CS_HOST_INT_EN;
|
|
ar933x_setreg(bas, AR933X_UART_CS_REG, reg);
|
|
uart_barrier(bas);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ar933x_bus_flush(struct uart_softc *sc, int what)
|
|
{
|
|
struct uart_bas *bas;
|
|
|
|
bas = &sc->sc_bas;
|
|
uart_lock(sc->sc_hwmtx);
|
|
ar933x_drain(bas, what);
|
|
uart_unlock(sc->sc_hwmtx);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ar933x_bus_getsig(struct uart_softc *sc)
|
|
{
|
|
uint32_t sig = sc->sc_hwsig;
|
|
|
|
/*
|
|
* For now, let's just return that DSR/DCD/CTS is asserted.
|
|
*/
|
|
SIGCHG(1, sig, SER_DSR, SER_DDSR);
|
|
SIGCHG(1, sig, SER_CTS, SER_DCTS);
|
|
SIGCHG(1, sig, SER_DCD, SER_DDCD);
|
|
SIGCHG(1, sig, SER_RI, SER_DRI);
|
|
|
|
sc->sc_hwsig = sig & ~SER_MASK_DELTA;
|
|
|
|
return (sig);
|
|
}
|
|
|
|
/*
|
|
* XXX TODO: actually implement the rest of this!
|
|
*/
|
|
static int
|
|
ar933x_bus_ioctl(struct uart_softc *sc, int request, intptr_t data)
|
|
{
|
|
int error = 0;
|
|
|
|
/* XXX lock */
|
|
switch (request) {
|
|
case UART_IOCTL_BREAK:
|
|
case UART_IOCTL_IFLOW:
|
|
case UART_IOCTL_OFLOW:
|
|
break;
|
|
case UART_IOCTL_BAUD:
|
|
*(int*)data = 115200;
|
|
break;
|
|
default:
|
|
error = EINVAL;
|
|
break;
|
|
}
|
|
|
|
/* XXX unlock */
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
* Bus interrupt handler.
|
|
*
|
|
* For now, system interrupts are disabled.
|
|
* So this is just called from a callout in uart_core.c
|
|
* to poll various state.
|
|
*/
|
|
static int
|
|
ar933x_bus_ipend(struct uart_softc *sc)
|
|
{
|
|
struct ar933x_softc *u = (struct ar933x_softc *)sc;
|
|
struct uart_bas *bas = &sc->sc_bas;
|
|
int ipend = 0;
|
|
uint32_t isr;
|
|
|
|
uart_lock(sc->sc_hwmtx);
|
|
|
|
/*
|
|
* Fetch/ACK the ISR status.
|
|
*/
|
|
isr = ar933x_getreg(bas, AR933X_UART_INT_REG);
|
|
ar933x_setreg(bas, AR933X_UART_INT_REG, isr);
|
|
uart_barrier(bas);
|
|
|
|
/*
|
|
* RX ready - notify upper layer.
|
|
*/
|
|
if (isr & AR933X_UART_INT_RX_VALID) {
|
|
ipend |= SER_INT_RXREADY;
|
|
}
|
|
|
|
/*
|
|
* If we get this interrupt, we should disable
|
|
* it from the interrupt mask and inform the uart
|
|
* driver appropriately.
|
|
*
|
|
* We can't keep setting SER_INT_TXIDLE or SER_INT_SIGCHG
|
|
* all the time or IO stops working. So we will always
|
|
* clear this interrupt if we get it, then we only signal
|
|
* the upper layer if we were doing active TX in the
|
|
* first place.
|
|
*
|
|
* Also, the name is misleading. This actually means
|
|
* "the FIFO is almost empty." So if we just write some
|
|
* more data to the FIFO without checking whether it can
|
|
* take said data, we'll overflow the thing.
|
|
*
|
|
* Unfortunately the FreeBSD uart device has no concept of
|
|
* partial UART writes - it expects that the whole buffer
|
|
* is written to the hardware. Thus for now, ar933x_bus_transmit()
|
|
* will wait for the FIFO to finish draining before it pushes
|
|
* more frames into it.
|
|
*/
|
|
if (isr & AR933X_UART_INT_TX_EMPTY) {
|
|
/*
|
|
* Update u_ier to disable TX notifications; update hardware
|
|
*/
|
|
u->u_ier &= ~AR933X_UART_INT_TX_EMPTY;
|
|
ar933x_setreg(bas, AR933X_UART_INT_EN_REG, u->u_ier);
|
|
uart_barrier(bas);
|
|
}
|
|
|
|
/*
|
|
* Only signal TX idle if we're not busy transmitting.
|
|
*
|
|
* XXX I never get _out_ of txbusy? Debug that!
|
|
*/
|
|
if (sc->sc_txbusy) {
|
|
if (isr & AR933X_UART_INT_TX_EMPTY) {
|
|
ipend |= SER_INT_TXIDLE;
|
|
} else {
|
|
ipend |= SER_INT_SIGCHG;
|
|
}
|
|
}
|
|
|
|
uart_unlock(sc->sc_hwmtx);
|
|
return (ipend);
|
|
}
|
|
|
|
static int
|
|
ar933x_bus_param(struct uart_softc *sc, int baudrate, int databits,
|
|
int stopbits, int parity)
|
|
{
|
|
struct uart_bas *bas;
|
|
int error;
|
|
|
|
bas = &sc->sc_bas;
|
|
uart_lock(sc->sc_hwmtx);
|
|
error = ar933x_param(bas, baudrate, databits, stopbits, parity);
|
|
uart_unlock(sc->sc_hwmtx);
|
|
return (error);
|
|
}
|
|
|
|
static int
|
|
ar933x_bus_probe(struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas;
|
|
int error;
|
|
|
|
bas = &sc->sc_bas;
|
|
|
|
error = ar933x_probe(bas);
|
|
if (error)
|
|
return (error);
|
|
|
|
/* Reset FIFOs. */
|
|
ar933x_drain(bas, UART_FLUSH_RECEIVER|UART_FLUSH_TRANSMITTER);
|
|
|
|
/* XXX TODO: actually find out what the FIFO depth is! */
|
|
sc->sc_rxfifosz = 16;
|
|
sc->sc_txfifosz = 16;
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ar933x_bus_receive(struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas = &sc->sc_bas;
|
|
int xc;
|
|
|
|
uart_lock(sc->sc_hwmtx);
|
|
|
|
/* Loop over until we are full, or no data is available */
|
|
while (ar933x_rxready(bas)) {
|
|
if (uart_rx_full(sc)) {
|
|
sc->sc_rxbuf[sc->sc_rxput] = UART_STAT_OVERRUN;
|
|
break;
|
|
}
|
|
|
|
/* Read the top of the RX FIFO */
|
|
xc = ar933x_getreg(bas, AR933X_UART_DATA_REG) & 0xff;
|
|
|
|
/* Remove that entry from said RX FIFO */
|
|
ar933x_setreg(bas, AR933X_UART_DATA_REG,
|
|
AR933X_UART_DATA_RX_CSR);
|
|
uart_barrier(bas);
|
|
|
|
/* XXX frame, parity error */
|
|
uart_rx_put(sc, xc);
|
|
}
|
|
|
|
/*
|
|
* XXX TODO: Discard everything left in the Rx FIFO?
|
|
* XXX only if we've hit an overrun condition?
|
|
*/
|
|
|
|
uart_unlock(sc->sc_hwmtx);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
ar933x_bus_setsig(struct uart_softc *sc, int sig)
|
|
{
|
|
#if 0
|
|
struct ar933x_softc *ns8250 = (struct ar933x_softc*)sc;
|
|
struct uart_bas *bas;
|
|
uint32_t new, old;
|
|
|
|
bas = &sc->sc_bas;
|
|
do {
|
|
old = sc->sc_hwsig;
|
|
new = old;
|
|
if (sig & SER_DDTR) {
|
|
SIGCHG(sig & SER_DTR, new, SER_DTR,
|
|
SER_DDTR);
|
|
}
|
|
if (sig & SER_DRTS) {
|
|
SIGCHG(sig & SER_RTS, new, SER_RTS,
|
|
SER_DRTS);
|
|
}
|
|
} while (!atomic_cmpset_32(&sc->sc_hwsig, old, new));
|
|
uart_lock(sc->sc_hwmtx);
|
|
ns8250->mcr &= ~(MCR_DTR|MCR_RTS);
|
|
if (new & SER_DTR)
|
|
ns8250->mcr |= MCR_DTR;
|
|
if (new & SER_RTS)
|
|
ns8250->mcr |= MCR_RTS;
|
|
uart_setreg(bas, REG_MCR, ns8250->mcr);
|
|
uart_barrier(bas);
|
|
uart_unlock(sc->sc_hwmtx);
|
|
#endif
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Write the current transmit buffer to the TX FIFO.
|
|
*
|
|
* Unfortunately the FreeBSD uart device has no concept of
|
|
* partial UART writes - it expects that the whole buffer
|
|
* is written to the hardware. Thus for now, this will wait for
|
|
* the FIFO to finish draining before it pushes more frames into it.
|
|
*
|
|
* If non-blocking operation is truely needed here, either
|
|
* the FreeBSD uart device will need to handle partial writes
|
|
* in xxx_bus_transmit(), or we'll need to do TX FIFO buffering
|
|
* of our own here.
|
|
*/
|
|
static int
|
|
ar933x_bus_transmit(struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas = &sc->sc_bas;
|
|
struct ar933x_softc *u = (struct ar933x_softc *)sc;
|
|
int i;
|
|
|
|
uart_lock(sc->sc_hwmtx);
|
|
|
|
/* Wait for the FIFO to be clear - see above */
|
|
while (ar933x_getreg(bas, AR933X_UART_CS_REG) &
|
|
AR933X_UART_CS_TX_BUSY)
|
|
;
|
|
|
|
/*
|
|
* Write some data!
|
|
*/
|
|
for (i = 0; i < sc->sc_txdatasz; i++) {
|
|
/* Write the TX data */
|
|
ar933x_setreg(bas, AR933X_UART_DATA_REG,
|
|
(sc->sc_txbuf[i] & 0xff) | AR933X_UART_DATA_TX_CSR);
|
|
uart_barrier(bas);
|
|
}
|
|
|
|
/*
|
|
* Now that we're transmitting, get interrupt notification
|
|
* when the FIFO is (almost) empty - see above.
|
|
*/
|
|
u->u_ier |= AR933X_UART_INT_TX_EMPTY;
|
|
ar933x_setreg(bas, AR933X_UART_INT_EN_REG, u->u_ier);
|
|
uart_barrier(bas);
|
|
|
|
/*
|
|
* Inform the upper layer that we are presently transmitting
|
|
* data to the hardware; this will be cleared when the
|
|
* TXIDLE interrupt occurs.
|
|
*/
|
|
sc->sc_txbusy = 1;
|
|
uart_unlock(sc->sc_hwmtx);
|
|
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ar933x_bus_grab(struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas = &sc->sc_bas;
|
|
uint32_t reg;
|
|
|
|
/* Disable the host interrupt now */
|
|
uart_lock(sc->sc_hwmtx);
|
|
reg = ar933x_getreg(bas, AR933X_UART_CS_REG);
|
|
reg &= ~AR933X_UART_CS_HOST_INT_EN;
|
|
ar933x_setreg(bas, AR933X_UART_CS_REG, reg);
|
|
uart_unlock(sc->sc_hwmtx);
|
|
}
|
|
|
|
static void
|
|
ar933x_bus_ungrab(struct uart_softc *sc)
|
|
{
|
|
struct uart_bas *bas = &sc->sc_bas;
|
|
uint32_t reg;
|
|
|
|
/* Enable the host interrupt now */
|
|
uart_lock(sc->sc_hwmtx);
|
|
reg = ar933x_getreg(bas, AR933X_UART_CS_REG);
|
|
reg |= AR933X_UART_CS_HOST_INT_EN;
|
|
ar933x_setreg(bas, AR933X_UART_CS_REG, reg);
|
|
uart_unlock(sc->sc_hwmtx);
|
|
}
|