155 lines
3.0 KiB
Plaintext
155 lines
3.0 KiB
Plaintext
# Firmware configuration file.
|
|
#
|
|
# Global limits (some are hardware limits, others are due to the firmware).
|
|
# nvi = 128 virtual interfaces
|
|
# niqflint = 1023 ingress queues with freelists and/or interrupts
|
|
# nethctrl = 64K Ethernet or ctrl egress queues
|
|
# neq = 64K egress queues of all kinds, including freelists
|
|
# nexactf = 336 MPS TCAM entries, can oversubscribe.
|
|
#
|
|
|
|
[global]
|
|
rss_glb_config_mode = basicvirtual
|
|
rss_glb_config_options = tnlmapen, hashtoeplitz, tnlalllkp
|
|
|
|
sge_timer_value = 1, 5, 10, 50, 100, 200 # usecs
|
|
|
|
# enable TP_OUT_CONFIG.IPIDSPLITMODE
|
|
reg[0x7d04] = 0x00010000/0x00010000
|
|
|
|
# TP_SHIFT_CNT
|
|
reg[0x7dc0] = 0x62f8849
|
|
|
|
filterMode = fragmentation, mpshittype, protocol, vlan, port, fcoe
|
|
filterMask = protocol, fcoe
|
|
|
|
# TP rx and tx channels (0 = auto).
|
|
tp_nrxch = 0
|
|
tp_ntxch = 0
|
|
|
|
# TP rx and tx payload memory (% of the total EDRAM + DDR3).
|
|
tp_pmrx = 38
|
|
tp_pmtx = 60
|
|
tp_pmrx_pagesize = 64K
|
|
tp_pmtx_pagesize = 64K
|
|
|
|
# TP OFLD MTUs
|
|
tp_mtus = 88, 256, 512, 576, 808, 1024, 1280, 1488, 1500, 2002, 2048, 4096, 4352, 8192, 9000, 9600
|
|
|
|
# PFs 0-3. These get 8 MSI/8 MSI-X vectors each. VFs are supported by
|
|
# these 4 PFs only. Not used here at all.
|
|
[function "0"]
|
|
nvf = 16
|
|
nvi = 1
|
|
[function "0/*"]
|
|
nvi = 1
|
|
|
|
[function "1"]
|
|
nvf = 16
|
|
nvi = 1
|
|
[function "1/*"]
|
|
nvi = 1
|
|
|
|
[function "2"]
|
|
nvf = 16
|
|
nvi = 1
|
|
[function "2/*"]
|
|
nvi = 1
|
|
|
|
[function "3"]
|
|
nvf = 16
|
|
nvi = 1
|
|
[function "3/*"]
|
|
nvi = 1
|
|
|
|
# PF4 is the resource-rich PF that the bus/nexus driver attaches to.
|
|
# It gets 32 MSI/128 MSI-X vectors.
|
|
[function "4"]
|
|
wx_caps = all
|
|
r_caps = all
|
|
nvi = 32
|
|
niqflint = 256
|
|
nethctrl = 128
|
|
neq = 256
|
|
nexactf = 328
|
|
cmask = all
|
|
pmask = all
|
|
|
|
# driver will mask off features it won't use
|
|
protocol = ofld
|
|
|
|
tp_l2t = 4096
|
|
tp_ddp = 2
|
|
|
|
# TCAM has 8K cells; each region must start at a multiple of 128 cell.
|
|
# Each entry in these categories takes 4 cells each. nhash will use the
|
|
# TCAM iff there is room left (that is, the rest don't add up to 2048).
|
|
nroute = 32
|
|
nclip = 32
|
|
nfilter = 1456
|
|
nserver = 512
|
|
nhash = 16384
|
|
|
|
# PF5 is the SCSI Controller PF. It gets 32 MSI/40 MSI-X vectors.
|
|
# Not used right now.
|
|
[function "5"]
|
|
nvi = 1
|
|
|
|
# PF6 is the FCoE Controller PF. It gets 32 MSI/40 MSI-X vectors.
|
|
# Not used right now.
|
|
[function "6"]
|
|
nvi = 1
|
|
|
|
# The following function, 1023, is not an actual PCIE function but is used to
|
|
# configure and reserve firmware internal resources that come from the global
|
|
# resource pool.
|
|
[function "1023"]
|
|
wx_caps = all
|
|
r_caps = all
|
|
nvi = 4
|
|
cmask = all
|
|
pmask = all
|
|
nexactf = 8
|
|
nfilter = 16
|
|
|
|
# MPS has 192K buffer space for ingress packets from the wire as well as
|
|
# loopback path of the L2 switch.
|
|
[port "0"]
|
|
dcb = none
|
|
bg_mem = 25
|
|
lpbk_mem = 25
|
|
hwm = 30
|
|
lwm = 15
|
|
dwm = 30
|
|
|
|
[port "1"]
|
|
dcb = none
|
|
bg_mem = 25
|
|
lpbk_mem = 25
|
|
hwm = 30
|
|
lwm = 15
|
|
dwm = 30
|
|
|
|
[port "2"]
|
|
dcb = none
|
|
bg_mem = 25
|
|
lpbk_mem = 25
|
|
hwm = 30
|
|
lwm = 15
|
|
dwm = 30
|
|
|
|
[port "3"]
|
|
dcb = none
|
|
bg_mem = 25
|
|
lpbk_mem = 25
|
|
hwm = 30
|
|
lwm = 15
|
|
dwm = 30
|
|
|
|
[fini]
|
|
version = 0x1
|
|
checksum = 0x6f516705
|
|
#
|
|
# $FreeBSD$
|
|
#
|