mckusick ce1bca43e9 Continuing efforts to provide hardening of FFS, this change adds a ... check hash to the superblock. If a check hash fails when an attempt is made to mount a filesystem, the mount fails with EINVAL (Invalid argument). This avoids a class of filesystem panics related to corrupted superblocks. The hash is done using crc32c. Check hases are added only to UFS2 and not to UFS1 as UFS1 is primarily used in embedded systems with small memories and low-powered processors which need as light-weight a filesystem as possible. Reviewed by: kib Tested by: Peter Holm Sponsored by: Netflix		2018-10-23 21:10:06 +00:00
..
adjkerntz
bectl	libbe(3)/bectl(8): Make consistent with beadm	2018-08-24 20:44:58 +00:00
bsdlabel	Move disktab to sbin/bsdlabel/	2018-09-18 20:52:24 +00:00
camcontrol	NVME support is only for x86 and powerpc64.	2018-06-14 01:15:19 +00:00
ccdconfig
clri
comcontrol
conscontrol
ddb	Move ddb.conf to sbin/ddb/ and switch to CONFS.	2018-08-11 13:25:39 +00:00
decryptcore	Make decryptcore(8) buildable.	2018-09-19 07:07:03 +00:00
devd	We don't need shell protection for when we're expanding matches.	2018-09-22 15:32:53 +00:00
devfs	Move all devfs related files to sbin/devfs/	2018-08-22 15:55:23 +00:00
devmatch	Add in a missing newline	2018-08-25 15:47:52 +00:00
dhclient	Move dhclient.conf to sbin/dhclient/.	2018-09-18 00:11:45 +00:00
dmesg
dump	Move dumpdates creation to CONFS=	2018-07-26 16:45:25 +00:00
dumpfs
dumpon	Convert cap_enter() < 0 && errno != ENOSYS to caph_enter() < 0.	2018-06-19 23:43:14 +00:00
etherswitchcfg
fdisk
ffsinfo
fsck
fsck_ffs	Continuing efforts to provide hardening of FFS, this change adds a	2018-10-23 21:10:06 +00:00
fsck_msdosfs	Detect and handle invalid number of FATs	2018-07-13 02:02:16 +00:00
fsdb
fsirand
gbde
geom	Add the "-t" option to geom(8) utility, to display geoms hierarchy.	2018-09-14 15:29:45 +00:00
ggate
growfs
gvinum	gvinum: revert WARNS change in Makefile	2018-06-17 01:39:22 +00:00
hastctl
hastd	Revert 335888 ("Ensure va_list is declared by including stdarg.h.")	2018-07-03 15:48:34 +00:00
ifconfig	Fix grammar.	2018-10-21 14:48:40 +00:00
init	Move the rc framework out of sbin/init into libexec/rc.	2018-10-17 16:49:11 +00:00
ipf
ipfw	Retire IPFIREWALL_NAT64_DIRECT_OUTPUT kernel option. And add ability	2018-10-21 16:29:12 +00:00
iscontrol
kldconfig
kldload
kldstat	Allow three digits of module id without breaking table alignment.	2018-07-02 09:14:00 +00:00
kldunload
ldconfig	Make ldconfig(8) atomic, by removing an unneccessary call to unlink(2)	2018-08-09 11:46:12 +00:00
md5	Allow bootstrapping md5 on Linux, MacOS and FreeBSD < 12	2018-08-23 18:19:01 +00:00
mdconfig
mdmfs	mdmfs(8): Check for other types of helper-program failure	2018-10-20 21:33:00 +00:00
mknod
mksnap_ffs
mount	When getting mount information for all filesystems, mount uses the	2018-08-07 21:17:45 +00:00
mount_cd9660	Advise reader to also see mdconfig(8) in mount_cd9660(8).	2018-08-11 08:34:24 +00:00
mount_fusefs
mount_msdosfs
mount_nfs
mount_nullfs
mount_udf
mount_unionfs
nandfs
natd
newfs	Continuing efforts to provide hardening of FFS, this change adds a	2018-10-23 21:10:06 +00:00
newfs_msdos	Added option to cluster-align the start of the root directory.	2018-06-15 06:03:40 +00:00
newfs_nandfs
nfsiod
nos-tun	various: general adoption of SPDX licensing ID tags.	2017-11-27 15:37:16 +00:00
nvmecontrol	Fix typo	2018-10-20 21:13:57 +00:00
pfctl	pf tests: Fix incorrect test for PR 231323	2018-10-22 23:33:48 +00:00
pflogd
ping	Allow dhclient and ping to build WITHOUT_DYNAMICROOT	2018-09-09 17:26:44 +00:00
ping6
quotacheck	quotacheck: build with WARNS=3	2018-06-16 23:47:59 +00:00
rcorder
reboot	Fix "fasthalt" to halt instead of reboot	2018-09-14 18:12:30 +00:00
recoverdisk
resolvconf	sbin: normalize paths using SRCTOP-relative paths or :H when possible	2017-03-04 11:33:01 +00:00
restore	Re-enable reading byte swapped NFS_MAGIC dumps.	2018-08-11 16:12:23 +00:00
route
routed
rtsol
savecore	Move etc/minfree to sbin/savecore/.	2018-08-04 22:15:59 +00:00
sconfig
setkey
shutdown
spppcontrol
sunlabel
swapon
sysctl	sysctl(8): Add a standard exit status section.	2018-09-24 20:46:45 +00:00
tests
tunefs	Fix spelling of an error message and add warning to another error	2018-10-17 16:54:13 +00:00
umount	umount: remove sync(2) call when used with -f	2018-09-13 13:57:42 +00:00
zfsbootcfg
Makefile	Rename be(1) to bectl(8); continues to live in /sbin	2018-07-24 13:21:44 +00:00
Makefile.amd64	NVME support is only for x86 and powerpc64.	2018-06-14 01:15:19 +00:00
Makefile.arm
Makefile.i386	NVME support is only for x86 and powerpc64.	2018-06-14 01:15:19 +00:00
Makefile.inc
Makefile.mips
Makefile.powerpc64	NVME support is only for x86 and powerpc64.	2018-06-14 01:15:19 +00:00
Makefile.sparc64