4b29d585cf
tree used it incorrectly, which lead to inaccurate overrated if_obytes accounting. The drbr(9) used to update ifnet stats on drbr_enqueue(), which is not accurate since enqueuing doesn't imply successful processing by driver. Dequeuing neither mean that. Most drivers also called drbr_stats_update() which did accounting again, leading to doubled if_obytes statistics. And in case of severe transmitting, when a packet could be several times enqueued and dequeued it could have been accounted several times. o Thus, make drbr(9) API thinner. Now drbr(9) merely chooses between ALTQ queueing or buf_ring(9) queueing. - It doesn't touch the buf_ring stats any more. - It doesn't touch ifnet stats anymore. - drbr_stats_update() no longer exists. o buf_ring(9) handles its stats itself: - It handles br_drops itself. - br_prod_bytes stats are dropped. Rationale: no one ever reads them but update of a common counter on every packet negatively affects performance due to excessive cache invalidation. - buf_ring_enqueue_bytes() reduced to buf_ring_enqueue(), since we no longer account bytes. o Drivers handle their stats theirselves: if_obytes, if_omcasts. o mlx4(4), igb(4), em(4), vxge(4), oce(4) and ixv(4) no longer use drbr_stats_update(), and update ifnet stats theirselves. o bxe(4) was the most correct driver, it didn't call drbr_stats_update(), thus it was the only driver accurate under moderate load. Now it also maintains stats itself. o ixgbe(4) had already taken stats from hardware, so just - drop software stats updating. - take multicast packet count from hardware as well. o mxge(4) just no longer needs NO_SLOW_STATS define. o cxgb(4), cxgbe(4) need no change, since they obtain stats from hardware. Reviewed by: jfv, gnn
4913 lines
123 KiB
C
4913 lines
123 KiB
C
/******************************************************************************
|
|
|
|
Copyright (c) 2006-2009, Myricom Inc.
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice,
|
|
this list of conditions and the following disclaimer.
|
|
|
|
2. Neither the name of the Myricom Inc, nor the names of its
|
|
contributors may be used to endorse or promote products derived from
|
|
this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
***************************************************************************/
|
|
|
|
#include <sys/cdefs.h>
|
|
__FBSDID("$FreeBSD$");
|
|
|
|
#include <sys/param.h>
|
|
#include <sys/systm.h>
|
|
#include <sys/linker.h>
|
|
#include <sys/firmware.h>
|
|
#include <sys/endian.h>
|
|
#include <sys/sockio.h>
|
|
#include <sys/mbuf.h>
|
|
#include <sys/malloc.h>
|
|
#include <sys/kdb.h>
|
|
#include <sys/kernel.h>
|
|
#include <sys/lock.h>
|
|
#include <sys/module.h>
|
|
#include <sys/socket.h>
|
|
#include <sys/sysctl.h>
|
|
#include <sys/sx.h>
|
|
#include <sys/taskqueue.h>
|
|
|
|
#include <net/if.h>
|
|
#include <net/if_arp.h>
|
|
#include <net/ethernet.h>
|
|
#include <net/if_dl.h>
|
|
#include <net/if_media.h>
|
|
|
|
#include <net/bpf.h>
|
|
|
|
#include <net/if_types.h>
|
|
#include <net/if_vlan_var.h>
|
|
#include <net/zlib.h>
|
|
|
|
#include <netinet/in_systm.h>
|
|
#include <netinet/in.h>
|
|
#include <netinet/ip.h>
|
|
#include <netinet/tcp.h>
|
|
|
|
#include <machine/bus.h>
|
|
#include <machine/in_cksum.h>
|
|
#include <machine/resource.h>
|
|
#include <sys/bus.h>
|
|
#include <sys/rman.h>
|
|
#include <sys/smp.h>
|
|
|
|
#include <dev/pci/pcireg.h>
|
|
#include <dev/pci/pcivar.h>
|
|
#include <dev/pci/pci_private.h> /* XXX for pci_cfg_restore */
|
|
|
|
#include <vm/vm.h> /* for pmap_mapdev() */
|
|
#include <vm/pmap.h>
|
|
|
|
#if defined(__i386) || defined(__amd64)
|
|
#include <machine/specialreg.h>
|
|
#endif
|
|
|
|
#include <dev/mxge/mxge_mcp.h>
|
|
#include <dev/mxge/mcp_gen_header.h>
|
|
/*#define MXGE_FAKE_IFP*/
|
|
#include <dev/mxge/if_mxge_var.h>
|
|
#ifdef IFNET_BUF_RING
|
|
#include <sys/buf_ring.h>
|
|
#endif
|
|
|
|
#include "opt_inet.h"
|
|
|
|
/* tunable params */
|
|
static int mxge_nvidia_ecrc_enable = 1;
|
|
static int mxge_force_firmware = 0;
|
|
static int mxge_intr_coal_delay = 30;
|
|
static int mxge_deassert_wait = 1;
|
|
static int mxge_flow_control = 1;
|
|
static int mxge_verbose = 0;
|
|
static int mxge_lro_cnt = 8;
|
|
static int mxge_ticks;
|
|
static int mxge_max_slices = 1;
|
|
static int mxge_rss_hash_type = MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT;
|
|
static int mxge_always_promisc = 0;
|
|
static int mxge_initial_mtu = ETHERMTU_JUMBO;
|
|
static int mxge_throttle = 0;
|
|
static char *mxge_fw_unaligned = "mxge_ethp_z8e";
|
|
static char *mxge_fw_aligned = "mxge_eth_z8e";
|
|
static char *mxge_fw_rss_aligned = "mxge_rss_eth_z8e";
|
|
static char *mxge_fw_rss_unaligned = "mxge_rss_ethp_z8e";
|
|
|
|
static int mxge_probe(device_t dev);
|
|
static int mxge_attach(device_t dev);
|
|
static int mxge_detach(device_t dev);
|
|
static int mxge_shutdown(device_t dev);
|
|
static void mxge_intr(void *arg);
|
|
|
|
static device_method_t mxge_methods[] =
|
|
{
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, mxge_probe),
|
|
DEVMETHOD(device_attach, mxge_attach),
|
|
DEVMETHOD(device_detach, mxge_detach),
|
|
DEVMETHOD(device_shutdown, mxge_shutdown),
|
|
{0, 0}
|
|
};
|
|
|
|
static driver_t mxge_driver =
|
|
{
|
|
"mxge",
|
|
mxge_methods,
|
|
sizeof(mxge_softc_t),
|
|
};
|
|
|
|
static devclass_t mxge_devclass;
|
|
|
|
/* Declare ourselves to be a child of the PCI bus.*/
|
|
DRIVER_MODULE(mxge, pci, mxge_driver, mxge_devclass, 0, 0);
|
|
MODULE_DEPEND(mxge, firmware, 1, 1, 1);
|
|
MODULE_DEPEND(mxge, zlib, 1, 1, 1);
|
|
|
|
static int mxge_load_firmware(mxge_softc_t *sc, int adopt);
|
|
static int mxge_send_cmd(mxge_softc_t *sc, uint32_t cmd, mxge_cmd_t *data);
|
|
static int mxge_close(mxge_softc_t *sc, int down);
|
|
static int mxge_open(mxge_softc_t *sc);
|
|
static void mxge_tick(void *arg);
|
|
|
|
static int
|
|
mxge_probe(device_t dev)
|
|
{
|
|
int rev;
|
|
|
|
|
|
if ((pci_get_vendor(dev) == MXGE_PCI_VENDOR_MYRICOM) &&
|
|
((pci_get_device(dev) == MXGE_PCI_DEVICE_Z8E) ||
|
|
(pci_get_device(dev) == MXGE_PCI_DEVICE_Z8E_9))) {
|
|
rev = pci_get_revid(dev);
|
|
switch (rev) {
|
|
case MXGE_PCI_REV_Z8E:
|
|
device_set_desc(dev, "Myri10G-PCIE-8A");
|
|
break;
|
|
case MXGE_PCI_REV_Z8ES:
|
|
device_set_desc(dev, "Myri10G-PCIE-8B");
|
|
break;
|
|
default:
|
|
device_set_desc(dev, "Myri10G-PCIE-8??");
|
|
device_printf(dev, "Unrecognized rev %d NIC\n",
|
|
rev);
|
|
break;
|
|
}
|
|
return 0;
|
|
}
|
|
return ENXIO;
|
|
}
|
|
|
|
static void
|
|
mxge_enable_wc(mxge_softc_t *sc)
|
|
{
|
|
#if defined(__i386) || defined(__amd64)
|
|
vm_offset_t len;
|
|
int err;
|
|
|
|
sc->wc = 1;
|
|
len = rman_get_size(sc->mem_res);
|
|
err = pmap_change_attr((vm_offset_t) sc->sram,
|
|
len, PAT_WRITE_COMBINING);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "pmap_change_attr failed, %d\n",
|
|
err);
|
|
sc->wc = 0;
|
|
}
|
|
#endif
|
|
}
|
|
|
|
|
|
/* callback to get our DMA address */
|
|
static void
|
|
mxge_dmamap_callback(void *arg, bus_dma_segment_t *segs, int nsegs,
|
|
int error)
|
|
{
|
|
if (error == 0) {
|
|
*(bus_addr_t *) arg = segs->ds_addr;
|
|
}
|
|
}
|
|
|
|
static int
|
|
mxge_dma_alloc(mxge_softc_t *sc, mxge_dma_t *dma, size_t bytes,
|
|
bus_size_t alignment)
|
|
{
|
|
int err;
|
|
device_t dev = sc->dev;
|
|
bus_size_t boundary, maxsegsize;
|
|
|
|
if (bytes > 4096 && alignment == 4096) {
|
|
boundary = 0;
|
|
maxsegsize = bytes;
|
|
} else {
|
|
boundary = 4096;
|
|
maxsegsize = 4096;
|
|
}
|
|
|
|
/* allocate DMAable memory tags */
|
|
err = bus_dma_tag_create(sc->parent_dmat, /* parent */
|
|
alignment, /* alignment */
|
|
boundary, /* boundary */
|
|
BUS_SPACE_MAXADDR, /* low */
|
|
BUS_SPACE_MAXADDR, /* high */
|
|
NULL, NULL, /* filter */
|
|
bytes, /* maxsize */
|
|
1, /* num segs */
|
|
maxsegsize, /* maxsegsize */
|
|
BUS_DMA_COHERENT, /* flags */
|
|
NULL, NULL, /* lock */
|
|
&dma->dmat); /* tag */
|
|
if (err != 0) {
|
|
device_printf(dev, "couldn't alloc tag (err = %d)\n", err);
|
|
return err;
|
|
}
|
|
|
|
/* allocate DMAable memory & map */
|
|
err = bus_dmamem_alloc(dma->dmat, &dma->addr,
|
|
(BUS_DMA_WAITOK | BUS_DMA_COHERENT
|
|
| BUS_DMA_ZERO), &dma->map);
|
|
if (err != 0) {
|
|
device_printf(dev, "couldn't alloc mem (err = %d)\n", err);
|
|
goto abort_with_dmat;
|
|
}
|
|
|
|
/* load the memory */
|
|
err = bus_dmamap_load(dma->dmat, dma->map, dma->addr, bytes,
|
|
mxge_dmamap_callback,
|
|
(void *)&dma->bus_addr, 0);
|
|
if (err != 0) {
|
|
device_printf(dev, "couldn't load map (err = %d)\n", err);
|
|
goto abort_with_mem;
|
|
}
|
|
return 0;
|
|
|
|
abort_with_mem:
|
|
bus_dmamem_free(dma->dmat, dma->addr, dma->map);
|
|
abort_with_dmat:
|
|
(void)bus_dma_tag_destroy(dma->dmat);
|
|
return err;
|
|
}
|
|
|
|
|
|
static void
|
|
mxge_dma_free(mxge_dma_t *dma)
|
|
{
|
|
bus_dmamap_unload(dma->dmat, dma->map);
|
|
bus_dmamem_free(dma->dmat, dma->addr, dma->map);
|
|
(void)bus_dma_tag_destroy(dma->dmat);
|
|
}
|
|
|
|
/*
|
|
* The eeprom strings on the lanaiX have the format
|
|
* SN=x\0
|
|
* MAC=x:x:x:x:x:x\0
|
|
* PC=text\0
|
|
*/
|
|
|
|
static int
|
|
mxge_parse_strings(mxge_softc_t *sc)
|
|
{
|
|
#define MXGE_NEXT_STRING(p) while(ptr < limit && *ptr++)
|
|
|
|
char *ptr, *limit;
|
|
int i, found_mac;
|
|
|
|
ptr = sc->eeprom_strings;
|
|
limit = sc->eeprom_strings + MXGE_EEPROM_STRINGS_SIZE;
|
|
found_mac = 0;
|
|
while (ptr < limit && *ptr != '\0') {
|
|
if (memcmp(ptr, "MAC=", 4) == 0) {
|
|
ptr += 1;
|
|
sc->mac_addr_string = ptr;
|
|
for (i = 0; i < 6; i++) {
|
|
ptr += 3;
|
|
if ((ptr + 2) > limit)
|
|
goto abort;
|
|
sc->mac_addr[i] = strtoul(ptr, NULL, 16);
|
|
found_mac = 1;
|
|
}
|
|
} else if (memcmp(ptr, "PC=", 3) == 0) {
|
|
ptr += 3;
|
|
strncpy(sc->product_code_string, ptr,
|
|
sizeof (sc->product_code_string) - 1);
|
|
} else if (memcmp(ptr, "SN=", 3) == 0) {
|
|
ptr += 3;
|
|
strncpy(sc->serial_number_string, ptr,
|
|
sizeof (sc->serial_number_string) - 1);
|
|
}
|
|
MXGE_NEXT_STRING(ptr);
|
|
}
|
|
|
|
if (found_mac)
|
|
return 0;
|
|
|
|
abort:
|
|
device_printf(sc->dev, "failed to parse eeprom_strings\n");
|
|
|
|
return ENXIO;
|
|
}
|
|
|
|
#if defined __i386 || defined i386 || defined __i386__ || defined __x86_64__
|
|
static void
|
|
mxge_enable_nvidia_ecrc(mxge_softc_t *sc)
|
|
{
|
|
uint32_t val;
|
|
unsigned long base, off;
|
|
char *va, *cfgptr;
|
|
device_t pdev, mcp55;
|
|
uint16_t vendor_id, device_id, word;
|
|
uintptr_t bus, slot, func, ivend, idev;
|
|
uint32_t *ptr32;
|
|
|
|
|
|
if (!mxge_nvidia_ecrc_enable)
|
|
return;
|
|
|
|
pdev = device_get_parent(device_get_parent(sc->dev));
|
|
if (pdev == NULL) {
|
|
device_printf(sc->dev, "could not find parent?\n");
|
|
return;
|
|
}
|
|
vendor_id = pci_read_config(pdev, PCIR_VENDOR, 2);
|
|
device_id = pci_read_config(pdev, PCIR_DEVICE, 2);
|
|
|
|
if (vendor_id != 0x10de)
|
|
return;
|
|
|
|
base = 0;
|
|
|
|
if (device_id == 0x005d) {
|
|
/* ck804, base address is magic */
|
|
base = 0xe0000000UL;
|
|
} else if (device_id >= 0x0374 && device_id <= 0x378) {
|
|
/* mcp55, base address stored in chipset */
|
|
mcp55 = pci_find_bsf(0, 0, 0);
|
|
if (mcp55 &&
|
|
0x10de == pci_read_config(mcp55, PCIR_VENDOR, 2) &&
|
|
0x0369 == pci_read_config(mcp55, PCIR_DEVICE, 2)) {
|
|
word = pci_read_config(mcp55, 0x90, 2);
|
|
base = ((unsigned long)word & 0x7ffeU) << 25;
|
|
}
|
|
}
|
|
if (!base)
|
|
return;
|
|
|
|
/* XXXX
|
|
Test below is commented because it is believed that doing
|
|
config read/write beyond 0xff will access the config space
|
|
for the next larger function. Uncomment this and remove
|
|
the hacky pmap_mapdev() way of accessing config space when
|
|
FreeBSD grows support for extended pcie config space access
|
|
*/
|
|
#if 0
|
|
/* See if we can, by some miracle, access the extended
|
|
config space */
|
|
val = pci_read_config(pdev, 0x178, 4);
|
|
if (val != 0xffffffff) {
|
|
val |= 0x40;
|
|
pci_write_config(pdev, 0x178, val, 4);
|
|
return;
|
|
}
|
|
#endif
|
|
/* Rather than using normal pci config space writes, we must
|
|
* map the Nvidia config space ourselves. This is because on
|
|
* opteron/nvidia class machine the 0xe000000 mapping is
|
|
* handled by the nvidia chipset, that means the internal PCI
|
|
* device (the on-chip northbridge), or the amd-8131 bridge
|
|
* and things behind them are not visible by this method.
|
|
*/
|
|
|
|
BUS_READ_IVAR(device_get_parent(pdev), pdev,
|
|
PCI_IVAR_BUS, &bus);
|
|
BUS_READ_IVAR(device_get_parent(pdev), pdev,
|
|
PCI_IVAR_SLOT, &slot);
|
|
BUS_READ_IVAR(device_get_parent(pdev), pdev,
|
|
PCI_IVAR_FUNCTION, &func);
|
|
BUS_READ_IVAR(device_get_parent(pdev), pdev,
|
|
PCI_IVAR_VENDOR, &ivend);
|
|
BUS_READ_IVAR(device_get_parent(pdev), pdev,
|
|
PCI_IVAR_DEVICE, &idev);
|
|
|
|
off = base
|
|
+ 0x00100000UL * (unsigned long)bus
|
|
+ 0x00001000UL * (unsigned long)(func
|
|
+ 8 * slot);
|
|
|
|
/* map it into the kernel */
|
|
va = pmap_mapdev(trunc_page((vm_paddr_t)off), PAGE_SIZE);
|
|
|
|
|
|
if (va == NULL) {
|
|
device_printf(sc->dev, "pmap_kenter_temporary didn't\n");
|
|
return;
|
|
}
|
|
/* get a pointer to the config space mapped into the kernel */
|
|
cfgptr = va + (off & PAGE_MASK);
|
|
|
|
/* make sure that we can really access it */
|
|
vendor_id = *(uint16_t *)(cfgptr + PCIR_VENDOR);
|
|
device_id = *(uint16_t *)(cfgptr + PCIR_DEVICE);
|
|
if (! (vendor_id == ivend && device_id == idev)) {
|
|
device_printf(sc->dev, "mapping failed: 0x%x:0x%x\n",
|
|
vendor_id, device_id);
|
|
pmap_unmapdev((vm_offset_t)va, PAGE_SIZE);
|
|
return;
|
|
}
|
|
|
|
ptr32 = (uint32_t*)(cfgptr + 0x178);
|
|
val = *ptr32;
|
|
|
|
if (val == 0xffffffff) {
|
|
device_printf(sc->dev, "extended mapping failed\n");
|
|
pmap_unmapdev((vm_offset_t)va, PAGE_SIZE);
|
|
return;
|
|
}
|
|
*ptr32 = val | 0x40;
|
|
pmap_unmapdev((vm_offset_t)va, PAGE_SIZE);
|
|
if (mxge_verbose)
|
|
device_printf(sc->dev,
|
|
"Enabled ECRC on upstream Nvidia bridge "
|
|
"at %d:%d:%d\n",
|
|
(int)bus, (int)slot, (int)func);
|
|
return;
|
|
}
|
|
#else
|
|
static void
|
|
mxge_enable_nvidia_ecrc(mxge_softc_t *sc)
|
|
{
|
|
device_printf(sc->dev,
|
|
"Nforce 4 chipset on non-x86/amd64!?!?!\n");
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
|
|
static int
|
|
mxge_dma_test(mxge_softc_t *sc, int test_type)
|
|
{
|
|
mxge_cmd_t cmd;
|
|
bus_addr_t dmatest_bus = sc->dmabench_dma.bus_addr;
|
|
int status;
|
|
uint32_t len;
|
|
char *test = " ";
|
|
|
|
|
|
/* Run a small DMA test.
|
|
* The magic multipliers to the length tell the firmware
|
|
* to do DMA read, write, or read+write tests. The
|
|
* results are returned in cmd.data0. The upper 16
|
|
* bits of the return is the number of transfers completed.
|
|
* The lower 16 bits is the time in 0.5us ticks that the
|
|
* transfers took to complete.
|
|
*/
|
|
|
|
len = sc->tx_boundary;
|
|
|
|
cmd.data0 = MXGE_LOWPART_TO_U32(dmatest_bus);
|
|
cmd.data1 = MXGE_HIGHPART_TO_U32(dmatest_bus);
|
|
cmd.data2 = len * 0x10000;
|
|
status = mxge_send_cmd(sc, test_type, &cmd);
|
|
if (status != 0) {
|
|
test = "read";
|
|
goto abort;
|
|
}
|
|
sc->read_dma = ((cmd.data0>>16) * len * 2) /
|
|
(cmd.data0 & 0xffff);
|
|
cmd.data0 = MXGE_LOWPART_TO_U32(dmatest_bus);
|
|
cmd.data1 = MXGE_HIGHPART_TO_U32(dmatest_bus);
|
|
cmd.data2 = len * 0x1;
|
|
status = mxge_send_cmd(sc, test_type, &cmd);
|
|
if (status != 0) {
|
|
test = "write";
|
|
goto abort;
|
|
}
|
|
sc->write_dma = ((cmd.data0>>16) * len * 2) /
|
|
(cmd.data0 & 0xffff);
|
|
|
|
cmd.data0 = MXGE_LOWPART_TO_U32(dmatest_bus);
|
|
cmd.data1 = MXGE_HIGHPART_TO_U32(dmatest_bus);
|
|
cmd.data2 = len * 0x10001;
|
|
status = mxge_send_cmd(sc, test_type, &cmd);
|
|
if (status != 0) {
|
|
test = "read/write";
|
|
goto abort;
|
|
}
|
|
sc->read_write_dma = ((cmd.data0>>16) * len * 2 * 2) /
|
|
(cmd.data0 & 0xffff);
|
|
|
|
abort:
|
|
if (status != 0 && test_type != MXGEFW_CMD_UNALIGNED_TEST)
|
|
device_printf(sc->dev, "DMA %s benchmark failed: %d\n",
|
|
test, status);
|
|
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* The Lanai Z8E PCI-E interface achieves higher Read-DMA throughput
|
|
* when the PCI-E Completion packets are aligned on an 8-byte
|
|
* boundary. Some PCI-E chip sets always align Completion packets; on
|
|
* the ones that do not, the alignment can be enforced by enabling
|
|
* ECRC generation (if supported).
|
|
*
|
|
* When PCI-E Completion packets are not aligned, it is actually more
|
|
* efficient to limit Read-DMA transactions to 2KB, rather than 4KB.
|
|
*
|
|
* If the driver can neither enable ECRC nor verify that it has
|
|
* already been enabled, then it must use a firmware image which works
|
|
* around unaligned completion packets (ethp_z8e.dat), and it should
|
|
* also ensure that it never gives the device a Read-DMA which is
|
|
* larger than 2KB by setting the tx_boundary to 2KB. If ECRC is
|
|
* enabled, then the driver should use the aligned (eth_z8e.dat)
|
|
* firmware image, and set tx_boundary to 4KB.
|
|
*/
|
|
|
|
static int
|
|
mxge_firmware_probe(mxge_softc_t *sc)
|
|
{
|
|
device_t dev = sc->dev;
|
|
int reg, status;
|
|
uint16_t pectl;
|
|
|
|
sc->tx_boundary = 4096;
|
|
/*
|
|
* Verify the max read request size was set to 4KB
|
|
* before trying the test with 4KB.
|
|
*/
|
|
if (pci_find_cap(dev, PCIY_EXPRESS, ®) == 0) {
|
|
pectl = pci_read_config(dev, reg + 0x8, 2);
|
|
if ((pectl & (5 << 12)) != (5 << 12)) {
|
|
device_printf(dev, "Max Read Req. size != 4k (0x%x\n",
|
|
pectl);
|
|
sc->tx_boundary = 2048;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* load the optimized firmware (which assumes aligned PCIe
|
|
* completions) in order to see if it works on this host.
|
|
*/
|
|
sc->fw_name = mxge_fw_aligned;
|
|
status = mxge_load_firmware(sc, 1);
|
|
if (status != 0) {
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* Enable ECRC if possible
|
|
*/
|
|
mxge_enable_nvidia_ecrc(sc);
|
|
|
|
/*
|
|
* Run a DMA test which watches for unaligned completions and
|
|
* aborts on the first one seen.
|
|
*/
|
|
|
|
status = mxge_dma_test(sc, MXGEFW_CMD_UNALIGNED_TEST);
|
|
if (status == 0)
|
|
return 0; /* keep the aligned firmware */
|
|
|
|
if (status != E2BIG)
|
|
device_printf(dev, "DMA test failed: %d\n", status);
|
|
if (status == ENOSYS)
|
|
device_printf(dev, "Falling back to ethp! "
|
|
"Please install up to date fw\n");
|
|
return status;
|
|
}
|
|
|
|
static int
|
|
mxge_select_firmware(mxge_softc_t *sc)
|
|
{
|
|
int aligned = 0;
|
|
int force_firmware = mxge_force_firmware;
|
|
|
|
if (sc->throttle)
|
|
force_firmware = sc->throttle;
|
|
|
|
if (force_firmware != 0) {
|
|
if (force_firmware == 1)
|
|
aligned = 1;
|
|
else
|
|
aligned = 0;
|
|
if (mxge_verbose)
|
|
device_printf(sc->dev,
|
|
"Assuming %s completions (forced)\n",
|
|
aligned ? "aligned" : "unaligned");
|
|
goto abort;
|
|
}
|
|
|
|
/* if the PCIe link width is 4 or less, we can use the aligned
|
|
firmware and skip any checks */
|
|
if (sc->link_width != 0 && sc->link_width <= 4) {
|
|
device_printf(sc->dev,
|
|
"PCIe x%d Link, expect reduced performance\n",
|
|
sc->link_width);
|
|
aligned = 1;
|
|
goto abort;
|
|
}
|
|
|
|
if (0 == mxge_firmware_probe(sc))
|
|
return 0;
|
|
|
|
abort:
|
|
if (aligned) {
|
|
sc->fw_name = mxge_fw_aligned;
|
|
sc->tx_boundary = 4096;
|
|
} else {
|
|
sc->fw_name = mxge_fw_unaligned;
|
|
sc->tx_boundary = 2048;
|
|
}
|
|
return (mxge_load_firmware(sc, 0));
|
|
}
|
|
|
|
union qualhack
|
|
{
|
|
const char *ro_char;
|
|
char *rw_char;
|
|
};
|
|
|
|
static int
|
|
mxge_validate_firmware(mxge_softc_t *sc, const mcp_gen_header_t *hdr)
|
|
{
|
|
|
|
|
|
if (be32toh(hdr->mcp_type) != MCP_TYPE_ETH) {
|
|
device_printf(sc->dev, "Bad firmware type: 0x%x\n",
|
|
be32toh(hdr->mcp_type));
|
|
return EIO;
|
|
}
|
|
|
|
/* save firmware version for sysctl */
|
|
strncpy(sc->fw_version, hdr->version, sizeof (sc->fw_version));
|
|
if (mxge_verbose)
|
|
device_printf(sc->dev, "firmware id: %s\n", hdr->version);
|
|
|
|
sscanf(sc->fw_version, "%d.%d.%d", &sc->fw_ver_major,
|
|
&sc->fw_ver_minor, &sc->fw_ver_tiny);
|
|
|
|
if (!(sc->fw_ver_major == MXGEFW_VERSION_MAJOR
|
|
&& sc->fw_ver_minor == MXGEFW_VERSION_MINOR)) {
|
|
device_printf(sc->dev, "Found firmware version %s\n",
|
|
sc->fw_version);
|
|
device_printf(sc->dev, "Driver needs %d.%d\n",
|
|
MXGEFW_VERSION_MAJOR, MXGEFW_VERSION_MINOR);
|
|
return EINVAL;
|
|
}
|
|
return 0;
|
|
|
|
}
|
|
|
|
static void *
|
|
z_alloc(void *nil, u_int items, u_int size)
|
|
{
|
|
void *ptr;
|
|
|
|
ptr = malloc(items * size, M_TEMP, M_NOWAIT);
|
|
return ptr;
|
|
}
|
|
|
|
static void
|
|
z_free(void *nil, void *ptr)
|
|
{
|
|
free(ptr, M_TEMP);
|
|
}
|
|
|
|
|
|
static int
|
|
mxge_load_firmware_helper(mxge_softc_t *sc, uint32_t *limit)
|
|
{
|
|
z_stream zs;
|
|
char *inflate_buffer;
|
|
const struct firmware *fw;
|
|
const mcp_gen_header_t *hdr;
|
|
unsigned hdr_offset;
|
|
int status;
|
|
unsigned int i;
|
|
char dummy;
|
|
size_t fw_len;
|
|
|
|
fw = firmware_get(sc->fw_name);
|
|
if (fw == NULL) {
|
|
device_printf(sc->dev, "Could not find firmware image %s\n",
|
|
sc->fw_name);
|
|
return ENOENT;
|
|
}
|
|
|
|
|
|
|
|
/* setup zlib and decompress f/w */
|
|
bzero(&zs, sizeof (zs));
|
|
zs.zalloc = z_alloc;
|
|
zs.zfree = z_free;
|
|
status = inflateInit(&zs);
|
|
if (status != Z_OK) {
|
|
status = EIO;
|
|
goto abort_with_fw;
|
|
}
|
|
|
|
/* the uncompressed size is stored as the firmware version,
|
|
which would otherwise go unused */
|
|
fw_len = (size_t) fw->version;
|
|
inflate_buffer = malloc(fw_len, M_TEMP, M_NOWAIT);
|
|
if (inflate_buffer == NULL)
|
|
goto abort_with_zs;
|
|
zs.avail_in = fw->datasize;
|
|
zs.next_in = __DECONST(char *, fw->data);
|
|
zs.avail_out = fw_len;
|
|
zs.next_out = inflate_buffer;
|
|
status = inflate(&zs, Z_FINISH);
|
|
if (status != Z_STREAM_END) {
|
|
device_printf(sc->dev, "zlib %d\n", status);
|
|
status = EIO;
|
|
goto abort_with_buffer;
|
|
}
|
|
|
|
/* check id */
|
|
hdr_offset = htobe32(*(const uint32_t *)
|
|
(inflate_buffer + MCP_HEADER_PTR_OFFSET));
|
|
if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > fw_len) {
|
|
device_printf(sc->dev, "Bad firmware file");
|
|
status = EIO;
|
|
goto abort_with_buffer;
|
|
}
|
|
hdr = (const void*)(inflate_buffer + hdr_offset);
|
|
|
|
status = mxge_validate_firmware(sc, hdr);
|
|
if (status != 0)
|
|
goto abort_with_buffer;
|
|
|
|
/* Copy the inflated firmware to NIC SRAM. */
|
|
for (i = 0; i < fw_len; i += 256) {
|
|
mxge_pio_copy(sc->sram + MXGE_FW_OFFSET + i,
|
|
inflate_buffer + i,
|
|
min(256U, (unsigned)(fw_len - i)));
|
|
wmb();
|
|
dummy = *sc->sram;
|
|
wmb();
|
|
}
|
|
|
|
*limit = fw_len;
|
|
status = 0;
|
|
abort_with_buffer:
|
|
free(inflate_buffer, M_TEMP);
|
|
abort_with_zs:
|
|
inflateEnd(&zs);
|
|
abort_with_fw:
|
|
firmware_put(fw, FIRMWARE_UNLOAD);
|
|
return status;
|
|
}
|
|
|
|
/*
|
|
* Enable or disable periodic RDMAs from the host to make certain
|
|
* chipsets resend dropped PCIe messages
|
|
*/
|
|
|
|
static void
|
|
mxge_dummy_rdma(mxge_softc_t *sc, int enable)
|
|
{
|
|
char buf_bytes[72];
|
|
volatile uint32_t *confirm;
|
|
volatile char *submit;
|
|
uint32_t *buf, dma_low, dma_high;
|
|
int i;
|
|
|
|
buf = (uint32_t *)((unsigned long)(buf_bytes + 7) & ~7UL);
|
|
|
|
/* clear confirmation addr */
|
|
confirm = (volatile uint32_t *)sc->cmd;
|
|
*confirm = 0;
|
|
wmb();
|
|
|
|
/* send an rdma command to the PCIe engine, and wait for the
|
|
response in the confirmation address. The firmware should
|
|
write a -1 there to indicate it is alive and well
|
|
*/
|
|
|
|
dma_low = MXGE_LOWPART_TO_U32(sc->cmd_dma.bus_addr);
|
|
dma_high = MXGE_HIGHPART_TO_U32(sc->cmd_dma.bus_addr);
|
|
buf[0] = htobe32(dma_high); /* confirm addr MSW */
|
|
buf[1] = htobe32(dma_low); /* confirm addr LSW */
|
|
buf[2] = htobe32(0xffffffff); /* confirm data */
|
|
dma_low = MXGE_LOWPART_TO_U32(sc->zeropad_dma.bus_addr);
|
|
dma_high = MXGE_HIGHPART_TO_U32(sc->zeropad_dma.bus_addr);
|
|
buf[3] = htobe32(dma_high); /* dummy addr MSW */
|
|
buf[4] = htobe32(dma_low); /* dummy addr LSW */
|
|
buf[5] = htobe32(enable); /* enable? */
|
|
|
|
|
|
submit = (volatile char *)(sc->sram + MXGEFW_BOOT_DUMMY_RDMA);
|
|
|
|
mxge_pio_copy(submit, buf, 64);
|
|
wmb();
|
|
DELAY(1000);
|
|
wmb();
|
|
i = 0;
|
|
while (*confirm != 0xffffffff && i < 20) {
|
|
DELAY(1000);
|
|
i++;
|
|
}
|
|
if (*confirm != 0xffffffff) {
|
|
device_printf(sc->dev, "dummy rdma %s failed (%p = 0x%x)",
|
|
(enable ? "enable" : "disable"), confirm,
|
|
*confirm);
|
|
}
|
|
return;
|
|
}
|
|
|
|
static int
|
|
mxge_send_cmd(mxge_softc_t *sc, uint32_t cmd, mxge_cmd_t *data)
|
|
{
|
|
mcp_cmd_t *buf;
|
|
char buf_bytes[sizeof(*buf) + 8];
|
|
volatile mcp_cmd_response_t *response = sc->cmd;
|
|
volatile char *cmd_addr = sc->sram + MXGEFW_ETH_CMD;
|
|
uint32_t dma_low, dma_high;
|
|
int err, sleep_total = 0;
|
|
|
|
/* ensure buf is aligned to 8 bytes */
|
|
buf = (mcp_cmd_t *)((unsigned long)(buf_bytes + 7) & ~7UL);
|
|
|
|
buf->data0 = htobe32(data->data0);
|
|
buf->data1 = htobe32(data->data1);
|
|
buf->data2 = htobe32(data->data2);
|
|
buf->cmd = htobe32(cmd);
|
|
dma_low = MXGE_LOWPART_TO_U32(sc->cmd_dma.bus_addr);
|
|
dma_high = MXGE_HIGHPART_TO_U32(sc->cmd_dma.bus_addr);
|
|
|
|
buf->response_addr.low = htobe32(dma_low);
|
|
buf->response_addr.high = htobe32(dma_high);
|
|
mtx_lock(&sc->cmd_mtx);
|
|
response->result = 0xffffffff;
|
|
wmb();
|
|
mxge_pio_copy((volatile void *)cmd_addr, buf, sizeof (*buf));
|
|
|
|
/* wait up to 20ms */
|
|
err = EAGAIN;
|
|
for (sleep_total = 0; sleep_total < 20; sleep_total++) {
|
|
bus_dmamap_sync(sc->cmd_dma.dmat,
|
|
sc->cmd_dma.map, BUS_DMASYNC_POSTREAD);
|
|
wmb();
|
|
switch (be32toh(response->result)) {
|
|
case 0:
|
|
data->data0 = be32toh(response->data);
|
|
err = 0;
|
|
break;
|
|
case 0xffffffff:
|
|
DELAY(1000);
|
|
break;
|
|
case MXGEFW_CMD_UNKNOWN:
|
|
err = ENOSYS;
|
|
break;
|
|
case MXGEFW_CMD_ERROR_UNALIGNED:
|
|
err = E2BIG;
|
|
break;
|
|
case MXGEFW_CMD_ERROR_BUSY:
|
|
err = EBUSY;
|
|
break;
|
|
case MXGEFW_CMD_ERROR_I2C_ABSENT:
|
|
err = ENXIO;
|
|
break;
|
|
default:
|
|
device_printf(sc->dev,
|
|
"mxge: command %d "
|
|
"failed, result = %d\n",
|
|
cmd, be32toh(response->result));
|
|
err = ENXIO;
|
|
break;
|
|
}
|
|
if (err != EAGAIN)
|
|
break;
|
|
}
|
|
if (err == EAGAIN)
|
|
device_printf(sc->dev, "mxge: command %d timed out"
|
|
"result = %d\n",
|
|
cmd, be32toh(response->result));
|
|
mtx_unlock(&sc->cmd_mtx);
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
mxge_adopt_running_firmware(mxge_softc_t *sc)
|
|
{
|
|
struct mcp_gen_header *hdr;
|
|
const size_t bytes = sizeof (struct mcp_gen_header);
|
|
size_t hdr_offset;
|
|
int status;
|
|
|
|
/* find running firmware header */
|
|
hdr_offset = htobe32(*(volatile uint32_t *)
|
|
(sc->sram + MCP_HEADER_PTR_OFFSET));
|
|
|
|
if ((hdr_offset & 3) || hdr_offset + sizeof(*hdr) > sc->sram_size) {
|
|
device_printf(sc->dev,
|
|
"Running firmware has bad header offset (%d)\n",
|
|
(int)hdr_offset);
|
|
return EIO;
|
|
}
|
|
|
|
/* copy header of running firmware from SRAM to host memory to
|
|
* validate firmware */
|
|
hdr = malloc(bytes, M_DEVBUF, M_NOWAIT);
|
|
if (hdr == NULL) {
|
|
device_printf(sc->dev, "could not malloc firmware hdr\n");
|
|
return ENOMEM;
|
|
}
|
|
bus_space_read_region_1(rman_get_bustag(sc->mem_res),
|
|
rman_get_bushandle(sc->mem_res),
|
|
hdr_offset, (char *)hdr, bytes);
|
|
status = mxge_validate_firmware(sc, hdr);
|
|
free(hdr, M_DEVBUF);
|
|
|
|
/*
|
|
* check to see if adopted firmware has bug where adopting
|
|
* it will cause broadcasts to be filtered unless the NIC
|
|
* is kept in ALLMULTI mode
|
|
*/
|
|
if (sc->fw_ver_major == 1 && sc->fw_ver_minor == 4 &&
|
|
sc->fw_ver_tiny >= 4 && sc->fw_ver_tiny <= 11) {
|
|
sc->adopted_rx_filter_bug = 1;
|
|
device_printf(sc->dev, "Adopting fw %d.%d.%d: "
|
|
"working around rx filter bug\n",
|
|
sc->fw_ver_major, sc->fw_ver_minor,
|
|
sc->fw_ver_tiny);
|
|
}
|
|
|
|
return status;
|
|
}
|
|
|
|
|
|
static int
|
|
mxge_load_firmware(mxge_softc_t *sc, int adopt)
|
|
{
|
|
volatile uint32_t *confirm;
|
|
volatile char *submit;
|
|
char buf_bytes[72];
|
|
uint32_t *buf, size, dma_low, dma_high;
|
|
int status, i;
|
|
|
|
buf = (uint32_t *)((unsigned long)(buf_bytes + 7) & ~7UL);
|
|
|
|
size = sc->sram_size;
|
|
status = mxge_load_firmware_helper(sc, &size);
|
|
if (status) {
|
|
if (!adopt)
|
|
return status;
|
|
/* Try to use the currently running firmware, if
|
|
it is new enough */
|
|
status = mxge_adopt_running_firmware(sc);
|
|
if (status) {
|
|
device_printf(sc->dev,
|
|
"failed to adopt running firmware\n");
|
|
return status;
|
|
}
|
|
device_printf(sc->dev,
|
|
"Successfully adopted running firmware\n");
|
|
if (sc->tx_boundary == 4096) {
|
|
device_printf(sc->dev,
|
|
"Using firmware currently running on NIC"
|
|
". For optimal\n");
|
|
device_printf(sc->dev,
|
|
"performance consider loading optimized "
|
|
"firmware\n");
|
|
}
|
|
sc->fw_name = mxge_fw_unaligned;
|
|
sc->tx_boundary = 2048;
|
|
return 0;
|
|
}
|
|
/* clear confirmation addr */
|
|
confirm = (volatile uint32_t *)sc->cmd;
|
|
*confirm = 0;
|
|
wmb();
|
|
/* send a reload command to the bootstrap MCP, and wait for the
|
|
response in the confirmation address. The firmware should
|
|
write a -1 there to indicate it is alive and well
|
|
*/
|
|
|
|
dma_low = MXGE_LOWPART_TO_U32(sc->cmd_dma.bus_addr);
|
|
dma_high = MXGE_HIGHPART_TO_U32(sc->cmd_dma.bus_addr);
|
|
|
|
buf[0] = htobe32(dma_high); /* confirm addr MSW */
|
|
buf[1] = htobe32(dma_low); /* confirm addr LSW */
|
|
buf[2] = htobe32(0xffffffff); /* confirm data */
|
|
|
|
/* FIX: All newest firmware should un-protect the bottom of
|
|
the sram before handoff. However, the very first interfaces
|
|
do not. Therefore the handoff copy must skip the first 8 bytes
|
|
*/
|
|
/* where the code starts*/
|
|
buf[3] = htobe32(MXGE_FW_OFFSET + 8);
|
|
buf[4] = htobe32(size - 8); /* length of code */
|
|
buf[5] = htobe32(8); /* where to copy to */
|
|
buf[6] = htobe32(0); /* where to jump to */
|
|
|
|
submit = (volatile char *)(sc->sram + MXGEFW_BOOT_HANDOFF);
|
|
mxge_pio_copy(submit, buf, 64);
|
|
wmb();
|
|
DELAY(1000);
|
|
wmb();
|
|
i = 0;
|
|
while (*confirm != 0xffffffff && i < 20) {
|
|
DELAY(1000*10);
|
|
i++;
|
|
bus_dmamap_sync(sc->cmd_dma.dmat,
|
|
sc->cmd_dma.map, BUS_DMASYNC_POSTREAD);
|
|
}
|
|
if (*confirm != 0xffffffff) {
|
|
device_printf(sc->dev,"handoff failed (%p = 0x%x)",
|
|
confirm, *confirm);
|
|
|
|
return ENXIO;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mxge_update_mac_address(mxge_softc_t *sc)
|
|
{
|
|
mxge_cmd_t cmd;
|
|
uint8_t *addr = sc->mac_addr;
|
|
int status;
|
|
|
|
|
|
cmd.data0 = ((addr[0] << 24) | (addr[1] << 16)
|
|
| (addr[2] << 8) | addr[3]);
|
|
|
|
cmd.data1 = ((addr[4] << 8) | (addr[5]));
|
|
|
|
status = mxge_send_cmd(sc, MXGEFW_SET_MAC_ADDRESS, &cmd);
|
|
return status;
|
|
}
|
|
|
|
static int
|
|
mxge_change_pause(mxge_softc_t *sc, int pause)
|
|
{
|
|
mxge_cmd_t cmd;
|
|
int status;
|
|
|
|
if (pause)
|
|
status = mxge_send_cmd(sc, MXGEFW_ENABLE_FLOW_CONTROL,
|
|
&cmd);
|
|
else
|
|
status = mxge_send_cmd(sc, MXGEFW_DISABLE_FLOW_CONTROL,
|
|
&cmd);
|
|
|
|
if (status) {
|
|
device_printf(sc->dev, "Failed to set flow control mode\n");
|
|
return ENXIO;
|
|
}
|
|
sc->pause = pause;
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
mxge_change_promisc(mxge_softc_t *sc, int promisc)
|
|
{
|
|
mxge_cmd_t cmd;
|
|
int status;
|
|
|
|
if (mxge_always_promisc)
|
|
promisc = 1;
|
|
|
|
if (promisc)
|
|
status = mxge_send_cmd(sc, MXGEFW_ENABLE_PROMISC,
|
|
&cmd);
|
|
else
|
|
status = mxge_send_cmd(sc, MXGEFW_DISABLE_PROMISC,
|
|
&cmd);
|
|
|
|
if (status) {
|
|
device_printf(sc->dev, "Failed to set promisc mode\n");
|
|
}
|
|
}
|
|
|
|
static void
|
|
mxge_set_multicast_list(mxge_softc_t *sc)
|
|
{
|
|
mxge_cmd_t cmd;
|
|
struct ifmultiaddr *ifma;
|
|
struct ifnet *ifp = sc->ifp;
|
|
int err;
|
|
|
|
/* This firmware is known to not support multicast */
|
|
if (!sc->fw_multicast_support)
|
|
return;
|
|
|
|
/* Disable multicast filtering while we play with the lists*/
|
|
err = mxge_send_cmd(sc, MXGEFW_ENABLE_ALLMULTI, &cmd);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Failed MXGEFW_ENABLE_ALLMULTI,"
|
|
" error status: %d\n", err);
|
|
return;
|
|
}
|
|
|
|
if (sc->adopted_rx_filter_bug)
|
|
return;
|
|
|
|
if (ifp->if_flags & IFF_ALLMULTI)
|
|
/* request to disable multicast filtering, so quit here */
|
|
return;
|
|
|
|
/* Flush all the filters */
|
|
|
|
err = mxge_send_cmd(sc, MXGEFW_LEAVE_ALL_MULTICAST_GROUPS, &cmd);
|
|
if (err != 0) {
|
|
device_printf(sc->dev,
|
|
"Failed MXGEFW_LEAVE_ALL_MULTICAST_GROUPS"
|
|
", error status: %d\n", err);
|
|
return;
|
|
}
|
|
|
|
/* Walk the multicast list, and add each address */
|
|
|
|
if_maddr_rlock(ifp);
|
|
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
bcopy(LLADDR((struct sockaddr_dl *)ifma->ifma_addr),
|
|
&cmd.data0, 4);
|
|
bcopy(LLADDR((struct sockaddr_dl *)ifma->ifma_addr) + 4,
|
|
&cmd.data1, 2);
|
|
cmd.data0 = htonl(cmd.data0);
|
|
cmd.data1 = htonl(cmd.data1);
|
|
err = mxge_send_cmd(sc, MXGEFW_JOIN_MULTICAST_GROUP, &cmd);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Failed "
|
|
"MXGEFW_JOIN_MULTICAST_GROUP, error status:"
|
|
"%d\t", err);
|
|
/* abort, leaving multicast filtering off */
|
|
if_maddr_runlock(ifp);
|
|
return;
|
|
}
|
|
}
|
|
if_maddr_runlock(ifp);
|
|
/* Enable multicast filtering */
|
|
err = mxge_send_cmd(sc, MXGEFW_DISABLE_ALLMULTI, &cmd);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Failed MXGEFW_DISABLE_ALLMULTI"
|
|
", error status: %d\n", err);
|
|
}
|
|
}
|
|
|
|
static int
|
|
mxge_max_mtu(mxge_softc_t *sc)
|
|
{
|
|
mxge_cmd_t cmd;
|
|
int status;
|
|
|
|
if (MJUMPAGESIZE - MXGEFW_PAD > MXGEFW_MAX_MTU)
|
|
return MXGEFW_MAX_MTU - MXGEFW_PAD;
|
|
|
|
/* try to set nbufs to see if it we can
|
|
use virtually contiguous jumbos */
|
|
cmd.data0 = 0;
|
|
status = mxge_send_cmd(sc, MXGEFW_CMD_ALWAYS_USE_N_BIG_BUFFERS,
|
|
&cmd);
|
|
if (status == 0)
|
|
return MXGEFW_MAX_MTU - MXGEFW_PAD;
|
|
|
|
/* otherwise, we're limited to MJUMPAGESIZE */
|
|
return MJUMPAGESIZE - MXGEFW_PAD;
|
|
}
|
|
|
|
static int
|
|
mxge_reset(mxge_softc_t *sc, int interrupts_setup)
|
|
{
|
|
struct mxge_slice_state *ss;
|
|
mxge_rx_done_t *rx_done;
|
|
volatile uint32_t *irq_claim;
|
|
mxge_cmd_t cmd;
|
|
int slice, status;
|
|
|
|
/* try to send a reset command to the card to see if it
|
|
is alive */
|
|
memset(&cmd, 0, sizeof (cmd));
|
|
status = mxge_send_cmd(sc, MXGEFW_CMD_RESET, &cmd);
|
|
if (status != 0) {
|
|
device_printf(sc->dev, "failed reset\n");
|
|
return ENXIO;
|
|
}
|
|
|
|
mxge_dummy_rdma(sc, 1);
|
|
|
|
|
|
/* set the intrq size */
|
|
cmd.data0 = sc->rx_ring_size;
|
|
status = mxge_send_cmd(sc, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd);
|
|
|
|
/*
|
|
* Even though we already know how many slices are supported
|
|
* via mxge_slice_probe(), MXGEFW_CMD_GET_MAX_RSS_QUEUES
|
|
* has magic side effects, and must be called after a reset.
|
|
* It must be called prior to calling any RSS related cmds,
|
|
* including assigning an interrupt queue for anything but
|
|
* slice 0. It must also be called *after*
|
|
* MXGEFW_CMD_SET_INTRQ_SIZE, since the intrq size is used by
|
|
* the firmware to compute offsets.
|
|
*/
|
|
|
|
if (sc->num_slices > 1) {
|
|
/* ask the maximum number of slices it supports */
|
|
status = mxge_send_cmd(sc, MXGEFW_CMD_GET_MAX_RSS_QUEUES,
|
|
&cmd);
|
|
if (status != 0) {
|
|
device_printf(sc->dev,
|
|
"failed to get number of slices\n");
|
|
return status;
|
|
}
|
|
/*
|
|
* MXGEFW_CMD_ENABLE_RSS_QUEUES must be called prior
|
|
* to setting up the interrupt queue DMA
|
|
*/
|
|
cmd.data0 = sc->num_slices;
|
|
cmd.data1 = MXGEFW_SLICE_INTR_MODE_ONE_PER_SLICE;
|
|
#ifdef IFNET_BUF_RING
|
|
cmd.data1 |= MXGEFW_SLICE_ENABLE_MULTIPLE_TX_QUEUES;
|
|
#endif
|
|
status = mxge_send_cmd(sc, MXGEFW_CMD_ENABLE_RSS_QUEUES,
|
|
&cmd);
|
|
if (status != 0) {
|
|
device_printf(sc->dev,
|
|
"failed to set number of slices\n");
|
|
return status;
|
|
}
|
|
}
|
|
|
|
|
|
if (interrupts_setup) {
|
|
/* Now exchange information about interrupts */
|
|
for (slice = 0; slice < sc->num_slices; slice++) {
|
|
rx_done = &sc->ss[slice].rx_done;
|
|
memset(rx_done->entry, 0, sc->rx_ring_size);
|
|
cmd.data0 = MXGE_LOWPART_TO_U32(rx_done->dma.bus_addr);
|
|
cmd.data1 = MXGE_HIGHPART_TO_U32(rx_done->dma.bus_addr);
|
|
cmd.data2 = slice;
|
|
status |= mxge_send_cmd(sc,
|
|
MXGEFW_CMD_SET_INTRQ_DMA,
|
|
&cmd);
|
|
}
|
|
}
|
|
|
|
status |= mxge_send_cmd(sc,
|
|
MXGEFW_CMD_GET_INTR_COAL_DELAY_OFFSET, &cmd);
|
|
|
|
|
|
sc->intr_coal_delay_ptr = (volatile uint32_t *)(sc->sram + cmd.data0);
|
|
|
|
status |= mxge_send_cmd(sc, MXGEFW_CMD_GET_IRQ_ACK_OFFSET, &cmd);
|
|
irq_claim = (volatile uint32_t *)(sc->sram + cmd.data0);
|
|
|
|
|
|
status |= mxge_send_cmd(sc, MXGEFW_CMD_GET_IRQ_DEASSERT_OFFSET,
|
|
&cmd);
|
|
sc->irq_deassert = (volatile uint32_t *)(sc->sram + cmd.data0);
|
|
if (status != 0) {
|
|
device_printf(sc->dev, "failed set interrupt parameters\n");
|
|
return status;
|
|
}
|
|
|
|
|
|
*sc->intr_coal_delay_ptr = htobe32(sc->intr_coal_delay);
|
|
|
|
|
|
/* run a DMA benchmark */
|
|
(void) mxge_dma_test(sc, MXGEFW_DMA_TEST);
|
|
|
|
for (slice = 0; slice < sc->num_slices; slice++) {
|
|
ss = &sc->ss[slice];
|
|
|
|
ss->irq_claim = irq_claim + (2 * slice);
|
|
/* reset mcp/driver shared state back to 0 */
|
|
ss->rx_done.idx = 0;
|
|
ss->rx_done.cnt = 0;
|
|
ss->tx.req = 0;
|
|
ss->tx.done = 0;
|
|
ss->tx.pkt_done = 0;
|
|
ss->tx.queue_active = 0;
|
|
ss->tx.activate = 0;
|
|
ss->tx.deactivate = 0;
|
|
ss->tx.wake = 0;
|
|
ss->tx.defrag = 0;
|
|
ss->tx.stall = 0;
|
|
ss->rx_big.cnt = 0;
|
|
ss->rx_small.cnt = 0;
|
|
ss->lro_bad_csum = 0;
|
|
ss->lro_queued = 0;
|
|
ss->lro_flushed = 0;
|
|
if (ss->fw_stats != NULL) {
|
|
bzero(ss->fw_stats, sizeof *ss->fw_stats);
|
|
}
|
|
}
|
|
sc->rdma_tags_available = 15;
|
|
status = mxge_update_mac_address(sc);
|
|
mxge_change_promisc(sc, sc->ifp->if_flags & IFF_PROMISC);
|
|
mxge_change_pause(sc, sc->pause);
|
|
mxge_set_multicast_list(sc);
|
|
if (sc->throttle) {
|
|
cmd.data0 = sc->throttle;
|
|
if (mxge_send_cmd(sc, MXGEFW_CMD_SET_THROTTLE_FACTOR,
|
|
&cmd)) {
|
|
device_printf(sc->dev,
|
|
"can't enable throttle\n");
|
|
}
|
|
}
|
|
return status;
|
|
}
|
|
|
|
static int
|
|
mxge_change_throttle(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
mxge_cmd_t cmd;
|
|
mxge_softc_t *sc;
|
|
int err;
|
|
unsigned int throttle;
|
|
|
|
sc = arg1;
|
|
throttle = sc->throttle;
|
|
err = sysctl_handle_int(oidp, &throttle, arg2, req);
|
|
if (err != 0) {
|
|
return err;
|
|
}
|
|
|
|
if (throttle == sc->throttle)
|
|
return 0;
|
|
|
|
if (throttle < MXGE_MIN_THROTTLE || throttle > MXGE_MAX_THROTTLE)
|
|
return EINVAL;
|
|
|
|
mtx_lock(&sc->driver_mtx);
|
|
cmd.data0 = throttle;
|
|
err = mxge_send_cmd(sc, MXGEFW_CMD_SET_THROTTLE_FACTOR, &cmd);
|
|
if (err == 0)
|
|
sc->throttle = throttle;
|
|
mtx_unlock(&sc->driver_mtx);
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
mxge_change_intr_coal(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
mxge_softc_t *sc;
|
|
unsigned int intr_coal_delay;
|
|
int err;
|
|
|
|
sc = arg1;
|
|
intr_coal_delay = sc->intr_coal_delay;
|
|
err = sysctl_handle_int(oidp, &intr_coal_delay, arg2, req);
|
|
if (err != 0) {
|
|
return err;
|
|
}
|
|
if (intr_coal_delay == sc->intr_coal_delay)
|
|
return 0;
|
|
|
|
if (intr_coal_delay == 0 || intr_coal_delay > 1000*1000)
|
|
return EINVAL;
|
|
|
|
mtx_lock(&sc->driver_mtx);
|
|
*sc->intr_coal_delay_ptr = htobe32(intr_coal_delay);
|
|
sc->intr_coal_delay = intr_coal_delay;
|
|
|
|
mtx_unlock(&sc->driver_mtx);
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
mxge_change_flow_control(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
mxge_softc_t *sc;
|
|
unsigned int enabled;
|
|
int err;
|
|
|
|
sc = arg1;
|
|
enabled = sc->pause;
|
|
err = sysctl_handle_int(oidp, &enabled, arg2, req);
|
|
if (err != 0) {
|
|
return err;
|
|
}
|
|
if (enabled == sc->pause)
|
|
return 0;
|
|
|
|
mtx_lock(&sc->driver_mtx);
|
|
err = mxge_change_pause(sc, enabled);
|
|
mtx_unlock(&sc->driver_mtx);
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
mxge_change_lro_locked(mxge_softc_t *sc, int lro_cnt)
|
|
{
|
|
struct ifnet *ifp;
|
|
int err = 0;
|
|
|
|
ifp = sc->ifp;
|
|
if (lro_cnt == 0)
|
|
ifp->if_capenable &= ~IFCAP_LRO;
|
|
else
|
|
ifp->if_capenable |= IFCAP_LRO;
|
|
sc->lro_cnt = lro_cnt;
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
mxge_close(sc, 0);
|
|
err = mxge_open(sc);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
mxge_change_lro(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
mxge_softc_t *sc;
|
|
unsigned int lro_cnt;
|
|
int err;
|
|
|
|
sc = arg1;
|
|
lro_cnt = sc->lro_cnt;
|
|
err = sysctl_handle_int(oidp, &lro_cnt, arg2, req);
|
|
if (err != 0)
|
|
return err;
|
|
|
|
if (lro_cnt == sc->lro_cnt)
|
|
return 0;
|
|
|
|
if (lro_cnt > 128)
|
|
return EINVAL;
|
|
|
|
mtx_lock(&sc->driver_mtx);
|
|
err = mxge_change_lro_locked(sc, lro_cnt);
|
|
mtx_unlock(&sc->driver_mtx);
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
mxge_handle_be32(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int err;
|
|
|
|
if (arg1 == NULL)
|
|
return EFAULT;
|
|
arg2 = be32toh(*(int *)arg1);
|
|
arg1 = NULL;
|
|
err = sysctl_handle_int(oidp, arg1, arg2, req);
|
|
|
|
return err;
|
|
}
|
|
|
|
static void
|
|
mxge_rem_sysctls(mxge_softc_t *sc)
|
|
{
|
|
struct mxge_slice_state *ss;
|
|
int slice;
|
|
|
|
if (sc->slice_sysctl_tree == NULL)
|
|
return;
|
|
|
|
for (slice = 0; slice < sc->num_slices; slice++) {
|
|
ss = &sc->ss[slice];
|
|
if (ss == NULL || ss->sysctl_tree == NULL)
|
|
continue;
|
|
sysctl_ctx_free(&ss->sysctl_ctx);
|
|
ss->sysctl_tree = NULL;
|
|
}
|
|
sysctl_ctx_free(&sc->slice_sysctl_ctx);
|
|
sc->slice_sysctl_tree = NULL;
|
|
}
|
|
|
|
static void
|
|
mxge_add_sysctls(mxge_softc_t *sc)
|
|
{
|
|
struct sysctl_ctx_list *ctx;
|
|
struct sysctl_oid_list *children;
|
|
mcp_irq_data_t *fw;
|
|
struct mxge_slice_state *ss;
|
|
int slice;
|
|
char slice_num[8];
|
|
|
|
ctx = device_get_sysctl_ctx(sc->dev);
|
|
children = SYSCTL_CHILDREN(device_get_sysctl_tree(sc->dev));
|
|
fw = sc->ss[0].fw_stats;
|
|
|
|
/* random information */
|
|
SYSCTL_ADD_STRING(ctx, children, OID_AUTO,
|
|
"firmware_version",
|
|
CTLFLAG_RD, &sc->fw_version,
|
|
0, "firmware version");
|
|
SYSCTL_ADD_STRING(ctx, children, OID_AUTO,
|
|
"serial_number",
|
|
CTLFLAG_RD, &sc->serial_number_string,
|
|
0, "serial number");
|
|
SYSCTL_ADD_STRING(ctx, children, OID_AUTO,
|
|
"product_code",
|
|
CTLFLAG_RD, &sc->product_code_string,
|
|
0, "product_code");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"pcie_link_width",
|
|
CTLFLAG_RD, &sc->link_width,
|
|
0, "tx_boundary");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"tx_boundary",
|
|
CTLFLAG_RD, &sc->tx_boundary,
|
|
0, "tx_boundary");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"write_combine",
|
|
CTLFLAG_RD, &sc->wc,
|
|
0, "write combining PIO?");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"read_dma_MBs",
|
|
CTLFLAG_RD, &sc->read_dma,
|
|
0, "DMA Read speed in MB/s");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"write_dma_MBs",
|
|
CTLFLAG_RD, &sc->write_dma,
|
|
0, "DMA Write speed in MB/s");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"read_write_dma_MBs",
|
|
CTLFLAG_RD, &sc->read_write_dma,
|
|
0, "DMA concurrent Read/Write speed in MB/s");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"watchdog_resets",
|
|
CTLFLAG_RD, &sc->watchdog_resets,
|
|
0, "Number of times NIC was reset");
|
|
|
|
|
|
/* performance related tunables */
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"intr_coal_delay",
|
|
CTLTYPE_INT|CTLFLAG_RW, sc,
|
|
0, mxge_change_intr_coal,
|
|
"I", "interrupt coalescing delay in usecs");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"throttle",
|
|
CTLTYPE_INT|CTLFLAG_RW, sc,
|
|
0, mxge_change_throttle,
|
|
"I", "transmit throttling");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"flow_control_enabled",
|
|
CTLTYPE_INT|CTLFLAG_RW, sc,
|
|
0, mxge_change_flow_control,
|
|
"I", "interrupt coalescing delay in usecs");
|
|
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"deassert_wait",
|
|
CTLFLAG_RW, &mxge_deassert_wait,
|
|
0, "Wait for IRQ line to go low in ihandler");
|
|
|
|
/* stats block from firmware is in network byte order.
|
|
Need to swap it */
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"link_up",
|
|
CTLTYPE_INT|CTLFLAG_RD, &fw->link_up,
|
|
0, mxge_handle_be32,
|
|
"I", "link up");
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"rdma_tags_available",
|
|
CTLTYPE_INT|CTLFLAG_RD, &fw->rdma_tags_available,
|
|
0, mxge_handle_be32,
|
|
"I", "rdma_tags_available");
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dropped_bad_crc32",
|
|
CTLTYPE_INT|CTLFLAG_RD,
|
|
&fw->dropped_bad_crc32,
|
|
0, mxge_handle_be32,
|
|
"I", "dropped_bad_crc32");
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dropped_bad_phy",
|
|
CTLTYPE_INT|CTLFLAG_RD,
|
|
&fw->dropped_bad_phy,
|
|
0, mxge_handle_be32,
|
|
"I", "dropped_bad_phy");
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dropped_link_error_or_filtered",
|
|
CTLTYPE_INT|CTLFLAG_RD,
|
|
&fw->dropped_link_error_or_filtered,
|
|
0, mxge_handle_be32,
|
|
"I", "dropped_link_error_or_filtered");
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dropped_link_overflow",
|
|
CTLTYPE_INT|CTLFLAG_RD, &fw->dropped_link_overflow,
|
|
0, mxge_handle_be32,
|
|
"I", "dropped_link_overflow");
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dropped_multicast_filtered",
|
|
CTLTYPE_INT|CTLFLAG_RD,
|
|
&fw->dropped_multicast_filtered,
|
|
0, mxge_handle_be32,
|
|
"I", "dropped_multicast_filtered");
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dropped_no_big_buffer",
|
|
CTLTYPE_INT|CTLFLAG_RD, &fw->dropped_no_big_buffer,
|
|
0, mxge_handle_be32,
|
|
"I", "dropped_no_big_buffer");
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dropped_no_small_buffer",
|
|
CTLTYPE_INT|CTLFLAG_RD,
|
|
&fw->dropped_no_small_buffer,
|
|
0, mxge_handle_be32,
|
|
"I", "dropped_no_small_buffer");
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dropped_overrun",
|
|
CTLTYPE_INT|CTLFLAG_RD, &fw->dropped_overrun,
|
|
0, mxge_handle_be32,
|
|
"I", "dropped_overrun");
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dropped_pause",
|
|
CTLTYPE_INT|CTLFLAG_RD,
|
|
&fw->dropped_pause,
|
|
0, mxge_handle_be32,
|
|
"I", "dropped_pause");
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dropped_runt",
|
|
CTLTYPE_INT|CTLFLAG_RD, &fw->dropped_runt,
|
|
0, mxge_handle_be32,
|
|
"I", "dropped_runt");
|
|
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"dropped_unicast_filtered",
|
|
CTLTYPE_INT|CTLFLAG_RD, &fw->dropped_unicast_filtered,
|
|
0, mxge_handle_be32,
|
|
"I", "dropped_unicast_filtered");
|
|
|
|
/* verbose printing? */
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"verbose",
|
|
CTLFLAG_RW, &mxge_verbose,
|
|
0, "verbose printing");
|
|
|
|
/* lro */
|
|
SYSCTL_ADD_PROC(ctx, children, OID_AUTO,
|
|
"lro_cnt",
|
|
CTLTYPE_INT|CTLFLAG_RW, sc,
|
|
0, mxge_change_lro,
|
|
"I", "number of lro merge queues");
|
|
|
|
|
|
/* add counters exported for debugging from all slices */
|
|
sysctl_ctx_init(&sc->slice_sysctl_ctx);
|
|
sc->slice_sysctl_tree =
|
|
SYSCTL_ADD_NODE(&sc->slice_sysctl_ctx, children, OID_AUTO,
|
|
"slice", CTLFLAG_RD, 0, "");
|
|
|
|
for (slice = 0; slice < sc->num_slices; slice++) {
|
|
ss = &sc->ss[slice];
|
|
sysctl_ctx_init(&ss->sysctl_ctx);
|
|
ctx = &ss->sysctl_ctx;
|
|
children = SYSCTL_CHILDREN(sc->slice_sysctl_tree);
|
|
sprintf(slice_num, "%d", slice);
|
|
ss->sysctl_tree =
|
|
SYSCTL_ADD_NODE(ctx, children, OID_AUTO, slice_num,
|
|
CTLFLAG_RD, 0, "");
|
|
children = SYSCTL_CHILDREN(ss->sysctl_tree);
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"rx_small_cnt",
|
|
CTLFLAG_RD, &ss->rx_small.cnt,
|
|
0, "rx_small_cnt");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"rx_big_cnt",
|
|
CTLFLAG_RD, &ss->rx_big.cnt,
|
|
0, "rx_small_cnt");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"lro_flushed", CTLFLAG_RD, &ss->lro_flushed,
|
|
0, "number of lro merge queues flushed");
|
|
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"lro_queued", CTLFLAG_RD, &ss->lro_queued,
|
|
0, "number of frames appended to lro merge"
|
|
"queues");
|
|
|
|
#ifndef IFNET_BUF_RING
|
|
/* only transmit from slice 0 for now */
|
|
if (slice > 0)
|
|
continue;
|
|
#endif
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"tx_req",
|
|
CTLFLAG_RD, &ss->tx.req,
|
|
0, "tx_req");
|
|
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"tx_done",
|
|
CTLFLAG_RD, &ss->tx.done,
|
|
0, "tx_done");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"tx_pkt_done",
|
|
CTLFLAG_RD, &ss->tx.pkt_done,
|
|
0, "tx_done");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"tx_stall",
|
|
CTLFLAG_RD, &ss->tx.stall,
|
|
0, "tx_stall");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"tx_wake",
|
|
CTLFLAG_RD, &ss->tx.wake,
|
|
0, "tx_wake");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"tx_defrag",
|
|
CTLFLAG_RD, &ss->tx.defrag,
|
|
0, "tx_defrag");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"tx_queue_active",
|
|
CTLFLAG_RD, &ss->tx.queue_active,
|
|
0, "tx_queue_active");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"tx_activate",
|
|
CTLFLAG_RD, &ss->tx.activate,
|
|
0, "tx_activate");
|
|
SYSCTL_ADD_INT(ctx, children, OID_AUTO,
|
|
"tx_deactivate",
|
|
CTLFLAG_RD, &ss->tx.deactivate,
|
|
0, "tx_deactivate");
|
|
}
|
|
}
|
|
|
|
/* copy an array of mcp_kreq_ether_send_t's to the mcp. Copy
|
|
backwards one at a time and handle ring wraps */
|
|
|
|
static inline void
|
|
mxge_submit_req_backwards(mxge_tx_ring_t *tx,
|
|
mcp_kreq_ether_send_t *src, int cnt)
|
|
{
|
|
int idx, starting_slot;
|
|
starting_slot = tx->req;
|
|
while (cnt > 1) {
|
|
cnt--;
|
|
idx = (starting_slot + cnt) & tx->mask;
|
|
mxge_pio_copy(&tx->lanai[idx],
|
|
&src[cnt], sizeof(*src));
|
|
wmb();
|
|
}
|
|
}
|
|
|
|
/*
|
|
* copy an array of mcp_kreq_ether_send_t's to the mcp. Copy
|
|
* at most 32 bytes at a time, so as to avoid involving the software
|
|
* pio handler in the nic. We re-write the first segment's flags
|
|
* to mark them valid only after writing the entire chain
|
|
*/
|
|
|
|
static inline void
|
|
mxge_submit_req(mxge_tx_ring_t *tx, mcp_kreq_ether_send_t *src,
|
|
int cnt)
|
|
{
|
|
int idx, i;
|
|
uint32_t *src_ints;
|
|
volatile uint32_t *dst_ints;
|
|
mcp_kreq_ether_send_t *srcp;
|
|
volatile mcp_kreq_ether_send_t *dstp, *dst;
|
|
uint8_t last_flags;
|
|
|
|
idx = tx->req & tx->mask;
|
|
|
|
last_flags = src->flags;
|
|
src->flags = 0;
|
|
wmb();
|
|
dst = dstp = &tx->lanai[idx];
|
|
srcp = src;
|
|
|
|
if ((idx + cnt) < tx->mask) {
|
|
for (i = 0; i < (cnt - 1); i += 2) {
|
|
mxge_pio_copy(dstp, srcp, 2 * sizeof(*src));
|
|
wmb(); /* force write every 32 bytes */
|
|
srcp += 2;
|
|
dstp += 2;
|
|
}
|
|
} else {
|
|
/* submit all but the first request, and ensure
|
|
that it is submitted below */
|
|
mxge_submit_req_backwards(tx, src, cnt);
|
|
i = 0;
|
|
}
|
|
if (i < cnt) {
|
|
/* submit the first request */
|
|
mxge_pio_copy(dstp, srcp, sizeof(*src));
|
|
wmb(); /* barrier before setting valid flag */
|
|
}
|
|
|
|
/* re-write the last 32-bits with the valid flags */
|
|
src->flags = last_flags;
|
|
src_ints = (uint32_t *)src;
|
|
src_ints+=3;
|
|
dst_ints = (volatile uint32_t *)dst;
|
|
dst_ints+=3;
|
|
*dst_ints = *src_ints;
|
|
tx->req += cnt;
|
|
wmb();
|
|
}
|
|
|
|
#if IFCAP_TSO4
|
|
|
|
static void
|
|
mxge_encap_tso(struct mxge_slice_state *ss, struct mbuf *m,
|
|
int busdma_seg_cnt, int ip_off)
|
|
{
|
|
mxge_tx_ring_t *tx;
|
|
mcp_kreq_ether_send_t *req;
|
|
bus_dma_segment_t *seg;
|
|
struct ip *ip;
|
|
struct tcphdr *tcp;
|
|
uint32_t low, high_swapped;
|
|
int len, seglen, cum_len, cum_len_next;
|
|
int next_is_first, chop, cnt, rdma_count, small;
|
|
uint16_t pseudo_hdr_offset, cksum_offset, mss;
|
|
uint8_t flags, flags_next;
|
|
static int once;
|
|
|
|
mss = m->m_pkthdr.tso_segsz;
|
|
|
|
/* negative cum_len signifies to the
|
|
* send loop that we are still in the
|
|
* header portion of the TSO packet.
|
|
*/
|
|
|
|
/* ensure we have the ethernet, IP and TCP
|
|
header together in the first mbuf, copy
|
|
it to a scratch buffer if not */
|
|
if (__predict_false(m->m_len < ip_off + sizeof (*ip))) {
|
|
m_copydata(m, 0, ip_off + sizeof (*ip),
|
|
ss->scratch);
|
|
ip = (struct ip *)(ss->scratch + ip_off);
|
|
} else {
|
|
ip = (struct ip *)(mtod(m, char *) + ip_off);
|
|
}
|
|
if (__predict_false(m->m_len < ip_off + (ip->ip_hl << 2)
|
|
+ sizeof (*tcp))) {
|
|
m_copydata(m, 0, ip_off + (ip->ip_hl << 2)
|
|
+ sizeof (*tcp), ss->scratch);
|
|
ip = (struct ip *)(mtod(m, char *) + ip_off);
|
|
}
|
|
|
|
tcp = (struct tcphdr *)((char *)ip + (ip->ip_hl << 2));
|
|
cum_len = -(ip_off + ((ip->ip_hl + tcp->th_off) << 2));
|
|
cksum_offset = ip_off + (ip->ip_hl << 2);
|
|
|
|
/* TSO implies checksum offload on this hardware */
|
|
if (__predict_false((m->m_pkthdr.csum_flags & (CSUM_TCP)) == 0)) {
|
|
/*
|
|
* If packet has full TCP csum, replace it with pseudo hdr
|
|
* sum that the NIC expects, otherwise the NIC will emit
|
|
* packets with bad TCP checksums.
|
|
*/
|
|
m->m_pkthdr.csum_flags = CSUM_TCP;
|
|
m->m_pkthdr.csum_data = offsetof(struct tcphdr, th_sum);
|
|
tcp->th_sum = in_pseudo(ip->ip_src.s_addr, ip->ip_dst.s_addr,
|
|
htons(IPPROTO_TCP + (m->m_pkthdr.len - cksum_offset)));
|
|
}
|
|
flags = MXGEFW_FLAGS_TSO_HDR | MXGEFW_FLAGS_FIRST;
|
|
|
|
|
|
/* for TSO, pseudo_hdr_offset holds mss.
|
|
* The firmware figures out where to put
|
|
* the checksum by parsing the header. */
|
|
pseudo_hdr_offset = htobe16(mss);
|
|
|
|
tx = &ss->tx;
|
|
req = tx->req_list;
|
|
seg = tx->seg_list;
|
|
cnt = 0;
|
|
rdma_count = 0;
|
|
/* "rdma_count" is the number of RDMAs belonging to the
|
|
* current packet BEFORE the current send request. For
|
|
* non-TSO packets, this is equal to "count".
|
|
* For TSO packets, rdma_count needs to be reset
|
|
* to 0 after a segment cut.
|
|
*
|
|
* The rdma_count field of the send request is
|
|
* the number of RDMAs of the packet starting at
|
|
* that request. For TSO send requests with one ore more cuts
|
|
* in the middle, this is the number of RDMAs starting
|
|
* after the last cut in the request. All previous
|
|
* segments before the last cut implicitly have 1 RDMA.
|
|
*
|
|
* Since the number of RDMAs is not known beforehand,
|
|
* it must be filled-in retroactively - after each
|
|
* segmentation cut or at the end of the entire packet.
|
|
*/
|
|
|
|
while (busdma_seg_cnt) {
|
|
/* Break the busdma segment up into pieces*/
|
|
low = MXGE_LOWPART_TO_U32(seg->ds_addr);
|
|
high_swapped = htobe32(MXGE_HIGHPART_TO_U32(seg->ds_addr));
|
|
len = seg->ds_len;
|
|
|
|
while (len) {
|
|
flags_next = flags & ~MXGEFW_FLAGS_FIRST;
|
|
seglen = len;
|
|
cum_len_next = cum_len + seglen;
|
|
(req-rdma_count)->rdma_count = rdma_count + 1;
|
|
if (__predict_true(cum_len >= 0)) {
|
|
/* payload */
|
|
chop = (cum_len_next > mss);
|
|
cum_len_next = cum_len_next % mss;
|
|
next_is_first = (cum_len_next == 0);
|
|
flags |= chop * MXGEFW_FLAGS_TSO_CHOP;
|
|
flags_next |= next_is_first *
|
|
MXGEFW_FLAGS_FIRST;
|
|
rdma_count |= -(chop | next_is_first);
|
|
rdma_count += chop & !next_is_first;
|
|
} else if (cum_len_next >= 0) {
|
|
/* header ends */
|
|
rdma_count = -1;
|
|
cum_len_next = 0;
|
|
seglen = -cum_len;
|
|
small = (mss <= MXGEFW_SEND_SMALL_SIZE);
|
|
flags_next = MXGEFW_FLAGS_TSO_PLD |
|
|
MXGEFW_FLAGS_FIRST |
|
|
(small * MXGEFW_FLAGS_SMALL);
|
|
}
|
|
|
|
req->addr_high = high_swapped;
|
|
req->addr_low = htobe32(low);
|
|
req->pseudo_hdr_offset = pseudo_hdr_offset;
|
|
req->pad = 0;
|
|
req->rdma_count = 1;
|
|
req->length = htobe16(seglen);
|
|
req->cksum_offset = cksum_offset;
|
|
req->flags = flags | ((cum_len & 1) *
|
|
MXGEFW_FLAGS_ALIGN_ODD);
|
|
low += seglen;
|
|
len -= seglen;
|
|
cum_len = cum_len_next;
|
|
flags = flags_next;
|
|
req++;
|
|
cnt++;
|
|
rdma_count++;
|
|
if (__predict_false(cksum_offset > seglen))
|
|
cksum_offset -= seglen;
|
|
else
|
|
cksum_offset = 0;
|
|
if (__predict_false(cnt > tx->max_desc))
|
|
goto drop;
|
|
}
|
|
busdma_seg_cnt--;
|
|
seg++;
|
|
}
|
|
(req-rdma_count)->rdma_count = rdma_count;
|
|
|
|
do {
|
|
req--;
|
|
req->flags |= MXGEFW_FLAGS_TSO_LAST;
|
|
} while (!(req->flags & (MXGEFW_FLAGS_TSO_CHOP | MXGEFW_FLAGS_FIRST)));
|
|
|
|
tx->info[((cnt - 1) + tx->req) & tx->mask].flag = 1;
|
|
mxge_submit_req(tx, tx->req_list, cnt);
|
|
#ifdef IFNET_BUF_RING
|
|
if ((ss->sc->num_slices > 1) && tx->queue_active == 0) {
|
|
/* tell the NIC to start polling this slice */
|
|
*tx->send_go = 1;
|
|
tx->queue_active = 1;
|
|
tx->activate++;
|
|
wmb();
|
|
}
|
|
#endif
|
|
return;
|
|
|
|
drop:
|
|
bus_dmamap_unload(tx->dmat, tx->info[tx->req & tx->mask].map);
|
|
m_freem(m);
|
|
ss->oerrors++;
|
|
if (!once) {
|
|
printf("tx->max_desc exceeded via TSO!\n");
|
|
printf("mss = %d, %ld, %d!\n", mss,
|
|
(long)seg - (long)tx->seg_list, tx->max_desc);
|
|
once = 1;
|
|
}
|
|
return;
|
|
|
|
}
|
|
|
|
#endif /* IFCAP_TSO4 */
|
|
|
|
#ifdef MXGE_NEW_VLAN_API
|
|
/*
|
|
* We reproduce the software vlan tag insertion from
|
|
* net/if_vlan.c:vlan_start() here so that we can advertise "hardware"
|
|
* vlan tag insertion. We need to advertise this in order to have the
|
|
* vlan interface respect our csum offload flags.
|
|
*/
|
|
static struct mbuf *
|
|
mxge_vlan_tag_insert(struct mbuf *m)
|
|
{
|
|
struct ether_vlan_header *evl;
|
|
|
|
M_PREPEND(m, ETHER_VLAN_ENCAP_LEN, M_DONTWAIT);
|
|
if (__predict_false(m == NULL))
|
|
return NULL;
|
|
if (m->m_len < sizeof(*evl)) {
|
|
m = m_pullup(m, sizeof(*evl));
|
|
if (__predict_false(m == NULL))
|
|
return NULL;
|
|
}
|
|
/*
|
|
* Transform the Ethernet header into an Ethernet header
|
|
* with 802.1Q encapsulation.
|
|
*/
|
|
evl = mtod(m, struct ether_vlan_header *);
|
|
bcopy((char *)evl + ETHER_VLAN_ENCAP_LEN,
|
|
(char *)evl, ETHER_HDR_LEN - ETHER_TYPE_LEN);
|
|
evl->evl_encap_proto = htons(ETHERTYPE_VLAN);
|
|
evl->evl_tag = htons(m->m_pkthdr.ether_vtag);
|
|
m->m_flags &= ~M_VLANTAG;
|
|
return m;
|
|
}
|
|
#endif /* MXGE_NEW_VLAN_API */
|
|
|
|
static void
|
|
mxge_encap(struct mxge_slice_state *ss, struct mbuf *m)
|
|
{
|
|
mxge_softc_t *sc;
|
|
mcp_kreq_ether_send_t *req;
|
|
bus_dma_segment_t *seg;
|
|
struct mbuf *m_tmp;
|
|
struct ifnet *ifp;
|
|
mxge_tx_ring_t *tx;
|
|
struct ip *ip;
|
|
int cnt, cum_len, err, i, idx, odd_flag, ip_off;
|
|
uint16_t pseudo_hdr_offset;
|
|
uint8_t flags, cksum_offset;
|
|
|
|
|
|
sc = ss->sc;
|
|
ifp = sc->ifp;
|
|
tx = &ss->tx;
|
|
|
|
ip_off = sizeof (struct ether_header);
|
|
#ifdef MXGE_NEW_VLAN_API
|
|
if (m->m_flags & M_VLANTAG) {
|
|
m = mxge_vlan_tag_insert(m);
|
|
if (__predict_false(m == NULL))
|
|
goto drop;
|
|
ip_off += ETHER_VLAN_ENCAP_LEN;
|
|
}
|
|
#endif
|
|
/* (try to) map the frame for DMA */
|
|
idx = tx->req & tx->mask;
|
|
err = bus_dmamap_load_mbuf_sg(tx->dmat, tx->info[idx].map,
|
|
m, tx->seg_list, &cnt,
|
|
BUS_DMA_NOWAIT);
|
|
if (__predict_false(err == EFBIG)) {
|
|
/* Too many segments in the chain. Try
|
|
to defrag */
|
|
m_tmp = m_defrag(m, M_NOWAIT);
|
|
if (m_tmp == NULL) {
|
|
goto drop;
|
|
}
|
|
ss->tx.defrag++;
|
|
m = m_tmp;
|
|
err = bus_dmamap_load_mbuf_sg(tx->dmat,
|
|
tx->info[idx].map,
|
|
m, tx->seg_list, &cnt,
|
|
BUS_DMA_NOWAIT);
|
|
}
|
|
if (__predict_false(err != 0)) {
|
|
device_printf(sc->dev, "bus_dmamap_load_mbuf_sg returned %d"
|
|
" packet len = %d\n", err, m->m_pkthdr.len);
|
|
goto drop;
|
|
}
|
|
bus_dmamap_sync(tx->dmat, tx->info[idx].map,
|
|
BUS_DMASYNC_PREWRITE);
|
|
tx->info[idx].m = m;
|
|
|
|
#if IFCAP_TSO4
|
|
/* TSO is different enough, we handle it in another routine */
|
|
if (m->m_pkthdr.csum_flags & (CSUM_TSO)) {
|
|
mxge_encap_tso(ss, m, cnt, ip_off);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
req = tx->req_list;
|
|
cksum_offset = 0;
|
|
pseudo_hdr_offset = 0;
|
|
flags = MXGEFW_FLAGS_NO_TSO;
|
|
|
|
/* checksum offloading? */
|
|
if (m->m_pkthdr.csum_flags & (CSUM_DELAY_DATA)) {
|
|
/* ensure ip header is in first mbuf, copy
|
|
it to a scratch buffer if not */
|
|
if (__predict_false(m->m_len < ip_off + sizeof (*ip))) {
|
|
m_copydata(m, 0, ip_off + sizeof (*ip),
|
|
ss->scratch);
|
|
ip = (struct ip *)(ss->scratch + ip_off);
|
|
} else {
|
|
ip = (struct ip *)(mtod(m, char *) + ip_off);
|
|
}
|
|
cksum_offset = ip_off + (ip->ip_hl << 2);
|
|
pseudo_hdr_offset = cksum_offset + m->m_pkthdr.csum_data;
|
|
pseudo_hdr_offset = htobe16(pseudo_hdr_offset);
|
|
req->cksum_offset = cksum_offset;
|
|
flags |= MXGEFW_FLAGS_CKSUM;
|
|
odd_flag = MXGEFW_FLAGS_ALIGN_ODD;
|
|
} else {
|
|
odd_flag = 0;
|
|
}
|
|
if (m->m_pkthdr.len < MXGEFW_SEND_SMALL_SIZE)
|
|
flags |= MXGEFW_FLAGS_SMALL;
|
|
|
|
/* convert segments into a request list */
|
|
cum_len = 0;
|
|
seg = tx->seg_list;
|
|
req->flags = MXGEFW_FLAGS_FIRST;
|
|
for (i = 0; i < cnt; i++) {
|
|
req->addr_low =
|
|
htobe32(MXGE_LOWPART_TO_U32(seg->ds_addr));
|
|
req->addr_high =
|
|
htobe32(MXGE_HIGHPART_TO_U32(seg->ds_addr));
|
|
req->length = htobe16(seg->ds_len);
|
|
req->cksum_offset = cksum_offset;
|
|
if (cksum_offset > seg->ds_len)
|
|
cksum_offset -= seg->ds_len;
|
|
else
|
|
cksum_offset = 0;
|
|
req->pseudo_hdr_offset = pseudo_hdr_offset;
|
|
req->pad = 0; /* complete solid 16-byte block */
|
|
req->rdma_count = 1;
|
|
req->flags |= flags | ((cum_len & 1) * odd_flag);
|
|
cum_len += seg->ds_len;
|
|
seg++;
|
|
req++;
|
|
req->flags = 0;
|
|
}
|
|
req--;
|
|
/* pad runts to 60 bytes */
|
|
if (cum_len < 60) {
|
|
req++;
|
|
req->addr_low =
|
|
htobe32(MXGE_LOWPART_TO_U32(sc->zeropad_dma.bus_addr));
|
|
req->addr_high =
|
|
htobe32(MXGE_HIGHPART_TO_U32(sc->zeropad_dma.bus_addr));
|
|
req->length = htobe16(60 - cum_len);
|
|
req->cksum_offset = 0;
|
|
req->pseudo_hdr_offset = pseudo_hdr_offset;
|
|
req->pad = 0; /* complete solid 16-byte block */
|
|
req->rdma_count = 1;
|
|
req->flags |= flags | ((cum_len & 1) * odd_flag);
|
|
cnt++;
|
|
}
|
|
|
|
tx->req_list[0].rdma_count = cnt;
|
|
#if 0
|
|
/* print what the firmware will see */
|
|
for (i = 0; i < cnt; i++) {
|
|
printf("%d: addr: 0x%x 0x%x len:%d pso%d,"
|
|
"cso:%d, flags:0x%x, rdma:%d\n",
|
|
i, (int)ntohl(tx->req_list[i].addr_high),
|
|
(int)ntohl(tx->req_list[i].addr_low),
|
|
(int)ntohs(tx->req_list[i].length),
|
|
(int)ntohs(tx->req_list[i].pseudo_hdr_offset),
|
|
tx->req_list[i].cksum_offset, tx->req_list[i].flags,
|
|
tx->req_list[i].rdma_count);
|
|
}
|
|
printf("--------------\n");
|
|
#endif
|
|
tx->info[((cnt - 1) + tx->req) & tx->mask].flag = 1;
|
|
mxge_submit_req(tx, tx->req_list, cnt);
|
|
#ifdef IFNET_BUF_RING
|
|
if ((ss->sc->num_slices > 1) && tx->queue_active == 0) {
|
|
/* tell the NIC to start polling this slice */
|
|
*tx->send_go = 1;
|
|
tx->queue_active = 1;
|
|
tx->activate++;
|
|
wmb();
|
|
}
|
|
#endif
|
|
return;
|
|
|
|
drop:
|
|
m_freem(m);
|
|
ss->oerrors++;
|
|
return;
|
|
}
|
|
|
|
#ifdef IFNET_BUF_RING
|
|
static void
|
|
mxge_qflush(struct ifnet *ifp)
|
|
{
|
|
mxge_softc_t *sc = ifp->if_softc;
|
|
mxge_tx_ring_t *tx;
|
|
struct mbuf *m;
|
|
int slice;
|
|
|
|
for (slice = 0; slice < sc->num_slices; slice++) {
|
|
tx = &sc->ss[slice].tx;
|
|
mtx_lock(&tx->mtx);
|
|
while ((m = buf_ring_dequeue_sc(tx->br)) != NULL)
|
|
m_freem(m);
|
|
mtx_unlock(&tx->mtx);
|
|
}
|
|
if_qflush(ifp);
|
|
}
|
|
|
|
static inline void
|
|
mxge_start_locked(struct mxge_slice_state *ss)
|
|
{
|
|
mxge_softc_t *sc;
|
|
struct mbuf *m;
|
|
struct ifnet *ifp;
|
|
mxge_tx_ring_t *tx;
|
|
|
|
sc = ss->sc;
|
|
ifp = sc->ifp;
|
|
tx = &ss->tx;
|
|
|
|
while ((tx->mask - (tx->req - tx->done)) > tx->max_desc) {
|
|
m = drbr_dequeue(ifp, tx->br);
|
|
if (m == NULL) {
|
|
return;
|
|
}
|
|
/* let BPF see it */
|
|
BPF_MTAP(ifp, m);
|
|
|
|
/* give it to the nic */
|
|
mxge_encap(ss, m);
|
|
}
|
|
/* ran out of transmit slots */
|
|
if (((ss->if_drv_flags & IFF_DRV_OACTIVE) == 0)
|
|
&& (!drbr_empty(ifp, tx->br))) {
|
|
ss->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
tx->stall++;
|
|
}
|
|
}
|
|
|
|
static int
|
|
mxge_transmit_locked(struct mxge_slice_state *ss, struct mbuf *m)
|
|
{
|
|
mxge_softc_t *sc;
|
|
struct ifnet *ifp;
|
|
mxge_tx_ring_t *tx;
|
|
int err;
|
|
|
|
sc = ss->sc;
|
|
ifp = sc->ifp;
|
|
tx = &ss->tx;
|
|
|
|
if ((ss->if_drv_flags & (IFF_DRV_RUNNING|IFF_DRV_OACTIVE)) !=
|
|
IFF_DRV_RUNNING) {
|
|
err = drbr_enqueue(ifp, tx->br, m);
|
|
return (err);
|
|
}
|
|
|
|
if (!drbr_needs_enqueue(ifp, tx->br) &&
|
|
((tx->mask - (tx->req - tx->done)) > tx->max_desc)) {
|
|
/* let BPF see it */
|
|
BPF_MTAP(ifp, m);
|
|
/* give it to the nic */
|
|
mxge_encap(ss, m);
|
|
} else if ((err = drbr_enqueue(ifp, tx->br, m)) != 0) {
|
|
return (err);
|
|
}
|
|
if (!drbr_empty(ifp, tx->br))
|
|
mxge_start_locked(ss);
|
|
return (0);
|
|
}
|
|
|
|
static int
|
|
mxge_transmit(struct ifnet *ifp, struct mbuf *m)
|
|
{
|
|
mxge_softc_t *sc = ifp->if_softc;
|
|
struct mxge_slice_state *ss;
|
|
mxge_tx_ring_t *tx;
|
|
int err = 0;
|
|
int slice;
|
|
|
|
slice = m->m_pkthdr.flowid;
|
|
slice &= (sc->num_slices - 1); /* num_slices always power of 2 */
|
|
|
|
ss = &sc->ss[slice];
|
|
tx = &ss->tx;
|
|
|
|
if (mtx_trylock(&tx->mtx)) {
|
|
err = mxge_transmit_locked(ss, m);
|
|
mtx_unlock(&tx->mtx);
|
|
} else {
|
|
err = drbr_enqueue(ifp, tx->br, m);
|
|
}
|
|
|
|
return (err);
|
|
}
|
|
|
|
#else
|
|
|
|
static inline void
|
|
mxge_start_locked(struct mxge_slice_state *ss)
|
|
{
|
|
mxge_softc_t *sc;
|
|
struct mbuf *m;
|
|
struct ifnet *ifp;
|
|
mxge_tx_ring_t *tx;
|
|
|
|
sc = ss->sc;
|
|
ifp = sc->ifp;
|
|
tx = &ss->tx;
|
|
while ((tx->mask - (tx->req - tx->done)) > tx->max_desc) {
|
|
IFQ_DRV_DEQUEUE(&ifp->if_snd, m);
|
|
if (m == NULL) {
|
|
return;
|
|
}
|
|
/* let BPF see it */
|
|
BPF_MTAP(ifp, m);
|
|
|
|
/* give it to the nic */
|
|
mxge_encap(ss, m);
|
|
}
|
|
/* ran out of transmit slots */
|
|
if ((sc->ifp->if_drv_flags & IFF_DRV_OACTIVE) == 0) {
|
|
sc->ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
tx->stall++;
|
|
}
|
|
}
|
|
#endif
|
|
static void
|
|
mxge_start(struct ifnet *ifp)
|
|
{
|
|
mxge_softc_t *sc = ifp->if_softc;
|
|
struct mxge_slice_state *ss;
|
|
|
|
/* only use the first slice for now */
|
|
ss = &sc->ss[0];
|
|
mtx_lock(&ss->tx.mtx);
|
|
mxge_start_locked(ss);
|
|
mtx_unlock(&ss->tx.mtx);
|
|
}
|
|
|
|
/*
|
|
* copy an array of mcp_kreq_ether_recv_t's to the mcp. Copy
|
|
* at most 32 bytes at a time, so as to avoid involving the software
|
|
* pio handler in the nic. We re-write the first segment's low
|
|
* DMA address to mark it valid only after we write the entire chunk
|
|
* in a burst
|
|
*/
|
|
static inline void
|
|
mxge_submit_8rx(volatile mcp_kreq_ether_recv_t *dst,
|
|
mcp_kreq_ether_recv_t *src)
|
|
{
|
|
uint32_t low;
|
|
|
|
low = src->addr_low;
|
|
src->addr_low = 0xffffffff;
|
|
mxge_pio_copy(dst, src, 4 * sizeof (*src));
|
|
wmb();
|
|
mxge_pio_copy(dst + 4, src + 4, 4 * sizeof (*src));
|
|
wmb();
|
|
src->addr_low = low;
|
|
dst->addr_low = low;
|
|
wmb();
|
|
}
|
|
|
|
static int
|
|
mxge_get_buf_small(struct mxge_slice_state *ss, bus_dmamap_t map, int idx)
|
|
{
|
|
bus_dma_segment_t seg;
|
|
struct mbuf *m;
|
|
mxge_rx_ring_t *rx = &ss->rx_small;
|
|
int cnt, err;
|
|
|
|
m = m_gethdr(M_DONTWAIT, MT_DATA);
|
|
if (m == NULL) {
|
|
rx->alloc_fail++;
|
|
err = ENOBUFS;
|
|
goto done;
|
|
}
|
|
m->m_len = MHLEN;
|
|
err = bus_dmamap_load_mbuf_sg(rx->dmat, map, m,
|
|
&seg, &cnt, BUS_DMA_NOWAIT);
|
|
if (err != 0) {
|
|
m_free(m);
|
|
goto done;
|
|
}
|
|
rx->info[idx].m = m;
|
|
rx->shadow[idx].addr_low =
|
|
htobe32(MXGE_LOWPART_TO_U32(seg.ds_addr));
|
|
rx->shadow[idx].addr_high =
|
|
htobe32(MXGE_HIGHPART_TO_U32(seg.ds_addr));
|
|
|
|
done:
|
|
if ((idx & 7) == 7)
|
|
mxge_submit_8rx(&rx->lanai[idx - 7], &rx->shadow[idx - 7]);
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
mxge_get_buf_big(struct mxge_slice_state *ss, bus_dmamap_t map, int idx)
|
|
{
|
|
bus_dma_segment_t seg[3];
|
|
struct mbuf *m;
|
|
mxge_rx_ring_t *rx = &ss->rx_big;
|
|
int cnt, err, i;
|
|
|
|
m = m_getjcl(M_DONTWAIT, MT_DATA, M_PKTHDR, rx->cl_size);
|
|
if (m == NULL) {
|
|
rx->alloc_fail++;
|
|
err = ENOBUFS;
|
|
goto done;
|
|
}
|
|
m->m_len = rx->mlen;
|
|
err = bus_dmamap_load_mbuf_sg(rx->dmat, map, m,
|
|
seg, &cnt, BUS_DMA_NOWAIT);
|
|
if (err != 0) {
|
|
m_free(m);
|
|
goto done;
|
|
}
|
|
rx->info[idx].m = m;
|
|
rx->shadow[idx].addr_low =
|
|
htobe32(MXGE_LOWPART_TO_U32(seg->ds_addr));
|
|
rx->shadow[idx].addr_high =
|
|
htobe32(MXGE_HIGHPART_TO_U32(seg->ds_addr));
|
|
|
|
#if MXGE_VIRT_JUMBOS
|
|
for (i = 1; i < cnt; i++) {
|
|
rx->shadow[idx + i].addr_low =
|
|
htobe32(MXGE_LOWPART_TO_U32(seg[i].ds_addr));
|
|
rx->shadow[idx + i].addr_high =
|
|
htobe32(MXGE_HIGHPART_TO_U32(seg[i].ds_addr));
|
|
}
|
|
#endif
|
|
|
|
done:
|
|
for (i = 0; i < rx->nbufs; i++) {
|
|
if ((idx & 7) == 7) {
|
|
mxge_submit_8rx(&rx->lanai[idx - 7],
|
|
&rx->shadow[idx - 7]);
|
|
}
|
|
idx++;
|
|
}
|
|
return err;
|
|
}
|
|
|
|
/*
|
|
* Myri10GE hardware checksums are not valid if the sender
|
|
* padded the frame with non-zero padding. This is because
|
|
* the firmware just does a simple 16-bit 1s complement
|
|
* checksum across the entire frame, excluding the first 14
|
|
* bytes. It is best to simply to check the checksum and
|
|
* tell the stack about it only if the checksum is good
|
|
*/
|
|
|
|
static inline uint16_t
|
|
mxge_rx_csum(struct mbuf *m, int csum)
|
|
{
|
|
struct ether_header *eh;
|
|
struct ip *ip;
|
|
uint16_t c;
|
|
|
|
eh = mtod(m, struct ether_header *);
|
|
|
|
/* only deal with IPv4 TCP & UDP for now */
|
|
if (__predict_false(eh->ether_type != htons(ETHERTYPE_IP)))
|
|
return 1;
|
|
ip = (struct ip *)(eh + 1);
|
|
if (__predict_false(ip->ip_p != IPPROTO_TCP &&
|
|
ip->ip_p != IPPROTO_UDP))
|
|
return 1;
|
|
#ifdef INET
|
|
c = in_pseudo(ip->ip_src.s_addr, ip->ip_dst.s_addr,
|
|
htonl(ntohs(csum) + ntohs(ip->ip_len) +
|
|
- (ip->ip_hl << 2) + ip->ip_p));
|
|
#else
|
|
c = 1;
|
|
#endif
|
|
c ^= 0xffff;
|
|
return (c);
|
|
}
|
|
|
|
static void
|
|
mxge_vlan_tag_remove(struct mbuf *m, uint32_t *csum)
|
|
{
|
|
struct ether_vlan_header *evl;
|
|
struct ether_header *eh;
|
|
uint32_t partial;
|
|
|
|
evl = mtod(m, struct ether_vlan_header *);
|
|
eh = mtod(m, struct ether_header *);
|
|
|
|
/*
|
|
* fix checksum by subtracting ETHER_VLAN_ENCAP_LEN bytes
|
|
* after what the firmware thought was the end of the ethernet
|
|
* header.
|
|
*/
|
|
|
|
/* put checksum into host byte order */
|
|
*csum = ntohs(*csum);
|
|
partial = ntohl(*(uint32_t *)(mtod(m, char *) + ETHER_HDR_LEN));
|
|
(*csum) += ~partial;
|
|
(*csum) += ((*csum) < ~partial);
|
|
(*csum) = ((*csum) >> 16) + ((*csum) & 0xFFFF);
|
|
(*csum) = ((*csum) >> 16) + ((*csum) & 0xFFFF);
|
|
|
|
/* restore checksum to network byte order;
|
|
later consumers expect this */
|
|
*csum = htons(*csum);
|
|
|
|
/* save the tag */
|
|
#ifdef MXGE_NEW_VLAN_API
|
|
m->m_pkthdr.ether_vtag = ntohs(evl->evl_tag);
|
|
#else
|
|
{
|
|
struct m_tag *mtag;
|
|
mtag = m_tag_alloc(MTAG_VLAN, MTAG_VLAN_TAG, sizeof(u_int),
|
|
M_NOWAIT);
|
|
if (mtag == NULL)
|
|
return;
|
|
VLAN_TAG_VALUE(mtag) = ntohs(evl->evl_tag);
|
|
m_tag_prepend(m, mtag);
|
|
}
|
|
|
|
#endif
|
|
m->m_flags |= M_VLANTAG;
|
|
|
|
/*
|
|
* Remove the 802.1q header by copying the Ethernet
|
|
* addresses over it and adjusting the beginning of
|
|
* the data in the mbuf. The encapsulated Ethernet
|
|
* type field is already in place.
|
|
*/
|
|
bcopy((char *)evl, (char *)evl + ETHER_VLAN_ENCAP_LEN,
|
|
ETHER_HDR_LEN - ETHER_TYPE_LEN);
|
|
m_adj(m, ETHER_VLAN_ENCAP_LEN);
|
|
}
|
|
|
|
|
|
static inline void
|
|
mxge_rx_done_big(struct mxge_slice_state *ss, uint32_t len, uint32_t csum)
|
|
{
|
|
mxge_softc_t *sc;
|
|
struct ifnet *ifp;
|
|
struct mbuf *m;
|
|
struct ether_header *eh;
|
|
mxge_rx_ring_t *rx;
|
|
bus_dmamap_t old_map;
|
|
int idx;
|
|
uint16_t tcpudp_csum;
|
|
|
|
sc = ss->sc;
|
|
ifp = sc->ifp;
|
|
rx = &ss->rx_big;
|
|
idx = rx->cnt & rx->mask;
|
|
rx->cnt += rx->nbufs;
|
|
/* save a pointer to the received mbuf */
|
|
m = rx->info[idx].m;
|
|
/* try to replace the received mbuf */
|
|
if (mxge_get_buf_big(ss, rx->extra_map, idx)) {
|
|
/* drop the frame -- the old mbuf is re-cycled */
|
|
ifp->if_ierrors++;
|
|
return;
|
|
}
|
|
|
|
/* unmap the received buffer */
|
|
old_map = rx->info[idx].map;
|
|
bus_dmamap_sync(rx->dmat, old_map, BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(rx->dmat, old_map);
|
|
|
|
/* swap the bus_dmamap_t's */
|
|
rx->info[idx].map = rx->extra_map;
|
|
rx->extra_map = old_map;
|
|
|
|
/* mcp implicitly skips 1st 2 bytes so that packet is properly
|
|
* aligned */
|
|
m->m_data += MXGEFW_PAD;
|
|
|
|
m->m_pkthdr.rcvif = ifp;
|
|
m->m_len = m->m_pkthdr.len = len;
|
|
ss->ipackets++;
|
|
eh = mtod(m, struct ether_header *);
|
|
if (eh->ether_type == htons(ETHERTYPE_VLAN)) {
|
|
mxge_vlan_tag_remove(m, &csum);
|
|
}
|
|
/* if the checksum is valid, mark it in the mbuf header */
|
|
if (sc->csum_flag && (0 == (tcpudp_csum = mxge_rx_csum(m, csum)))) {
|
|
if (sc->lro_cnt && (0 == mxge_lro_rx(ss, m, csum)))
|
|
return;
|
|
/* otherwise, it was a UDP frame, or a TCP frame which
|
|
we could not do LRO on. Tell the stack that the
|
|
checksum is good */
|
|
m->m_pkthdr.csum_data = 0xffff;
|
|
m->m_pkthdr.csum_flags = CSUM_PSEUDO_HDR | CSUM_DATA_VALID;
|
|
}
|
|
/* flowid only valid if RSS hashing is enabled */
|
|
if (sc->num_slices > 1) {
|
|
m->m_pkthdr.flowid = (ss - sc->ss);
|
|
m->m_flags |= M_FLOWID;
|
|
}
|
|
/* pass the frame up the stack */
|
|
(*ifp->if_input)(ifp, m);
|
|
}
|
|
|
|
static inline void
|
|
mxge_rx_done_small(struct mxge_slice_state *ss, uint32_t len, uint32_t csum)
|
|
{
|
|
mxge_softc_t *sc;
|
|
struct ifnet *ifp;
|
|
struct ether_header *eh;
|
|
struct mbuf *m;
|
|
mxge_rx_ring_t *rx;
|
|
bus_dmamap_t old_map;
|
|
int idx;
|
|
uint16_t tcpudp_csum;
|
|
|
|
sc = ss->sc;
|
|
ifp = sc->ifp;
|
|
rx = &ss->rx_small;
|
|
idx = rx->cnt & rx->mask;
|
|
rx->cnt++;
|
|
/* save a pointer to the received mbuf */
|
|
m = rx->info[idx].m;
|
|
/* try to replace the received mbuf */
|
|
if (mxge_get_buf_small(ss, rx->extra_map, idx)) {
|
|
/* drop the frame -- the old mbuf is re-cycled */
|
|
ifp->if_ierrors++;
|
|
return;
|
|
}
|
|
|
|
/* unmap the received buffer */
|
|
old_map = rx->info[idx].map;
|
|
bus_dmamap_sync(rx->dmat, old_map, BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(rx->dmat, old_map);
|
|
|
|
/* swap the bus_dmamap_t's */
|
|
rx->info[idx].map = rx->extra_map;
|
|
rx->extra_map = old_map;
|
|
|
|
/* mcp implicitly skips 1st 2 bytes so that packet is properly
|
|
* aligned */
|
|
m->m_data += MXGEFW_PAD;
|
|
|
|
m->m_pkthdr.rcvif = ifp;
|
|
m->m_len = m->m_pkthdr.len = len;
|
|
ss->ipackets++;
|
|
eh = mtod(m, struct ether_header *);
|
|
if (eh->ether_type == htons(ETHERTYPE_VLAN)) {
|
|
mxge_vlan_tag_remove(m, &csum);
|
|
}
|
|
/* if the checksum is valid, mark it in the mbuf header */
|
|
if (sc->csum_flag && (0 == (tcpudp_csum = mxge_rx_csum(m, csum)))) {
|
|
if (sc->lro_cnt && (0 == mxge_lro_rx(ss, m, csum)))
|
|
return;
|
|
/* otherwise, it was a UDP frame, or a TCP frame which
|
|
we could not do LRO on. Tell the stack that the
|
|
checksum is good */
|
|
m->m_pkthdr.csum_data = 0xffff;
|
|
m->m_pkthdr.csum_flags = CSUM_PSEUDO_HDR | CSUM_DATA_VALID;
|
|
}
|
|
/* flowid only valid if RSS hashing is enabled */
|
|
if (sc->num_slices > 1) {
|
|
m->m_pkthdr.flowid = (ss - sc->ss);
|
|
m->m_flags |= M_FLOWID;
|
|
}
|
|
/* pass the frame up the stack */
|
|
(*ifp->if_input)(ifp, m);
|
|
}
|
|
|
|
static inline void
|
|
mxge_clean_rx_done(struct mxge_slice_state *ss)
|
|
{
|
|
mxge_rx_done_t *rx_done = &ss->rx_done;
|
|
int limit = 0;
|
|
uint16_t length;
|
|
uint16_t checksum;
|
|
|
|
|
|
while (rx_done->entry[rx_done->idx].length != 0) {
|
|
length = ntohs(rx_done->entry[rx_done->idx].length);
|
|
rx_done->entry[rx_done->idx].length = 0;
|
|
checksum = rx_done->entry[rx_done->idx].checksum;
|
|
if (length <= (MHLEN - MXGEFW_PAD))
|
|
mxge_rx_done_small(ss, length, checksum);
|
|
else
|
|
mxge_rx_done_big(ss, length, checksum);
|
|
rx_done->cnt++;
|
|
rx_done->idx = rx_done->cnt & rx_done->mask;
|
|
|
|
/* limit potential for livelock */
|
|
if (__predict_false(++limit > rx_done->mask / 2))
|
|
break;
|
|
}
|
|
#ifdef INET
|
|
while (!SLIST_EMPTY(&ss->lro_active)) {
|
|
struct lro_entry *lro = SLIST_FIRST(&ss->lro_active);
|
|
SLIST_REMOVE_HEAD(&ss->lro_active, next);
|
|
mxge_lro_flush(ss, lro);
|
|
}
|
|
#endif
|
|
}
|
|
|
|
|
|
static inline void
|
|
mxge_tx_done(struct mxge_slice_state *ss, uint32_t mcp_idx)
|
|
{
|
|
struct ifnet *ifp;
|
|
mxge_tx_ring_t *tx;
|
|
struct mbuf *m;
|
|
bus_dmamap_t map;
|
|
int idx;
|
|
int *flags;
|
|
|
|
tx = &ss->tx;
|
|
ifp = ss->sc->ifp;
|
|
while (tx->pkt_done != mcp_idx) {
|
|
idx = tx->done & tx->mask;
|
|
tx->done++;
|
|
m = tx->info[idx].m;
|
|
/* mbuf and DMA map only attached to the first
|
|
segment per-mbuf */
|
|
if (m != NULL) {
|
|
ss->obytes += m->m_pkthdr.len;
|
|
if (m->m_flags & M_MCAST)
|
|
ss->omcasts++;
|
|
ss->opackets++;
|
|
tx->info[idx].m = NULL;
|
|
map = tx->info[idx].map;
|
|
bus_dmamap_unload(tx->dmat, map);
|
|
m_freem(m);
|
|
}
|
|
if (tx->info[idx].flag) {
|
|
tx->info[idx].flag = 0;
|
|
tx->pkt_done++;
|
|
}
|
|
}
|
|
|
|
/* If we have space, clear IFF_OACTIVE to tell the stack that
|
|
its OK to send packets */
|
|
#ifdef IFNET_BUF_RING
|
|
flags = &ss->if_drv_flags;
|
|
#else
|
|
flags = &ifp->if_drv_flags;
|
|
#endif
|
|
mtx_lock(&ss->tx.mtx);
|
|
if ((*flags) & IFF_DRV_OACTIVE &&
|
|
tx->req - tx->done < (tx->mask + 1)/4) {
|
|
*(flags) &= ~IFF_DRV_OACTIVE;
|
|
ss->tx.wake++;
|
|
mxge_start_locked(ss);
|
|
}
|
|
#ifdef IFNET_BUF_RING
|
|
if ((ss->sc->num_slices > 1) && (tx->req == tx->done)) {
|
|
/* let the NIC stop polling this queue, since there
|
|
* are no more transmits pending */
|
|
if (tx->req == tx->done) {
|
|
*tx->send_stop = 1;
|
|
tx->queue_active = 0;
|
|
tx->deactivate++;
|
|
wmb();
|
|
}
|
|
}
|
|
#endif
|
|
mtx_unlock(&ss->tx.mtx);
|
|
|
|
}
|
|
|
|
static struct mxge_media_type mxge_xfp_media_types[] =
|
|
{
|
|
{IFM_10G_CX4, 0x7f, "10GBASE-CX4 (module)"},
|
|
{IFM_10G_SR, (1 << 7), "10GBASE-SR"},
|
|
{IFM_10G_LR, (1 << 6), "10GBASE-LR"},
|
|
{0, (1 << 5), "10GBASE-ER"},
|
|
{IFM_10G_LRM, (1 << 4), "10GBASE-LRM"},
|
|
{0, (1 << 3), "10GBASE-SW"},
|
|
{0, (1 << 2), "10GBASE-LW"},
|
|
{0, (1 << 1), "10GBASE-EW"},
|
|
{0, (1 << 0), "Reserved"}
|
|
};
|
|
static struct mxge_media_type mxge_sfp_media_types[] =
|
|
{
|
|
{IFM_10G_TWINAX, 0, "10GBASE-Twinax"},
|
|
{0, (1 << 7), "Reserved"},
|
|
{IFM_10G_LRM, (1 << 6), "10GBASE-LRM"},
|
|
{IFM_10G_LR, (1 << 5), "10GBASE-LR"},
|
|
{IFM_10G_SR, (1 << 4), "10GBASE-SR"},
|
|
{IFM_10G_TWINAX,(1 << 0), "10GBASE-Twinax"}
|
|
};
|
|
|
|
static void
|
|
mxge_media_set(mxge_softc_t *sc, int media_type)
|
|
{
|
|
|
|
|
|
ifmedia_add(&sc->media, IFM_ETHER | IFM_FDX | media_type,
|
|
0, NULL);
|
|
ifmedia_set(&sc->media, IFM_ETHER | IFM_FDX | media_type);
|
|
sc->current_media = media_type;
|
|
sc->media.ifm_media = sc->media.ifm_cur->ifm_media;
|
|
}
|
|
|
|
static void
|
|
mxge_media_init(mxge_softc_t *sc)
|
|
{
|
|
char *ptr;
|
|
int i;
|
|
|
|
ifmedia_removeall(&sc->media);
|
|
mxge_media_set(sc, IFM_AUTO);
|
|
|
|
/*
|
|
* parse the product code to deterimine the interface type
|
|
* (CX4, XFP, Quad Ribbon Fiber) by looking at the character
|
|
* after the 3rd dash in the driver's cached copy of the
|
|
* EEPROM's product code string.
|
|
*/
|
|
ptr = sc->product_code_string;
|
|
if (ptr == NULL) {
|
|
device_printf(sc->dev, "Missing product code\n");
|
|
return;
|
|
}
|
|
|
|
for (i = 0; i < 3; i++, ptr++) {
|
|
ptr = strchr(ptr, '-');
|
|
if (ptr == NULL) {
|
|
device_printf(sc->dev,
|
|
"only %d dashes in PC?!?\n", i);
|
|
return;
|
|
}
|
|
}
|
|
if (*ptr == 'C' || *(ptr +1) == 'C') {
|
|
/* -C is CX4 */
|
|
sc->connector = MXGE_CX4;
|
|
mxge_media_set(sc, IFM_10G_CX4);
|
|
} else if (*ptr == 'Q') {
|
|
/* -Q is Quad Ribbon Fiber */
|
|
sc->connector = MXGE_QRF;
|
|
device_printf(sc->dev, "Quad Ribbon Fiber Media\n");
|
|
/* FreeBSD has no media type for Quad ribbon fiber */
|
|
} else if (*ptr == 'R') {
|
|
/* -R is XFP */
|
|
sc->connector = MXGE_XFP;
|
|
} else if (*ptr == 'S' || *(ptr +1) == 'S') {
|
|
/* -S or -2S is SFP+ */
|
|
sc->connector = MXGE_SFP;
|
|
} else {
|
|
device_printf(sc->dev, "Unknown media type: %c\n", *ptr);
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Determine the media type for a NIC. Some XFPs will identify
|
|
* themselves only when their link is up, so this is initiated via a
|
|
* link up interrupt. However, this can potentially take up to
|
|
* several milliseconds, so it is run via the watchdog routine, rather
|
|
* than in the interrupt handler itself.
|
|
*/
|
|
static void
|
|
mxge_media_probe(mxge_softc_t *sc)
|
|
{
|
|
mxge_cmd_t cmd;
|
|
char *cage_type;
|
|
|
|
struct mxge_media_type *mxge_media_types = NULL;
|
|
int i, err, ms, mxge_media_type_entries;
|
|
uint32_t byte;
|
|
|
|
sc->need_media_probe = 0;
|
|
|
|
if (sc->connector == MXGE_XFP) {
|
|
/* -R is XFP */
|
|
mxge_media_types = mxge_xfp_media_types;
|
|
mxge_media_type_entries =
|
|
sizeof (mxge_xfp_media_types) /
|
|
sizeof (mxge_xfp_media_types[0]);
|
|
byte = MXGE_XFP_COMPLIANCE_BYTE;
|
|
cage_type = "XFP";
|
|
} else if (sc->connector == MXGE_SFP) {
|
|
/* -S or -2S is SFP+ */
|
|
mxge_media_types = mxge_sfp_media_types;
|
|
mxge_media_type_entries =
|
|
sizeof (mxge_sfp_media_types) /
|
|
sizeof (mxge_sfp_media_types[0]);
|
|
cage_type = "SFP+";
|
|
byte = 3;
|
|
} else {
|
|
/* nothing to do; media type cannot change */
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* At this point we know the NIC has an XFP cage, so now we
|
|
* try to determine what is in the cage by using the
|
|
* firmware's XFP I2C commands to read the XFP 10GbE compilance
|
|
* register. We read just one byte, which may take over
|
|
* a millisecond
|
|
*/
|
|
|
|
cmd.data0 = 0; /* just fetch 1 byte, not all 256 */
|
|
cmd.data1 = byte;
|
|
err = mxge_send_cmd(sc, MXGEFW_CMD_I2C_READ, &cmd);
|
|
if (err == MXGEFW_CMD_ERROR_I2C_FAILURE) {
|
|
device_printf(sc->dev, "failed to read XFP\n");
|
|
}
|
|
if (err == MXGEFW_CMD_ERROR_I2C_ABSENT) {
|
|
device_printf(sc->dev, "Type R/S with no XFP!?!?\n");
|
|
}
|
|
if (err != MXGEFW_CMD_OK) {
|
|
return;
|
|
}
|
|
|
|
/* now we wait for the data to be cached */
|
|
cmd.data0 = byte;
|
|
err = mxge_send_cmd(sc, MXGEFW_CMD_I2C_BYTE, &cmd);
|
|
for (ms = 0; (err == EBUSY) && (ms < 50); ms++) {
|
|
DELAY(1000);
|
|
cmd.data0 = byte;
|
|
err = mxge_send_cmd(sc, MXGEFW_CMD_I2C_BYTE, &cmd);
|
|
}
|
|
if (err != MXGEFW_CMD_OK) {
|
|
device_printf(sc->dev, "failed to read %s (%d, %dms)\n",
|
|
cage_type, err, ms);
|
|
return;
|
|
}
|
|
|
|
if (cmd.data0 == mxge_media_types[0].bitmask) {
|
|
if (mxge_verbose)
|
|
device_printf(sc->dev, "%s:%s\n", cage_type,
|
|
mxge_media_types[0].name);
|
|
if (sc->current_media != mxge_media_types[0].flag) {
|
|
mxge_media_init(sc);
|
|
mxge_media_set(sc, mxge_media_types[0].flag);
|
|
}
|
|
return;
|
|
}
|
|
for (i = 1; i < mxge_media_type_entries; i++) {
|
|
if (cmd.data0 & mxge_media_types[i].bitmask) {
|
|
if (mxge_verbose)
|
|
device_printf(sc->dev, "%s:%s\n",
|
|
cage_type,
|
|
mxge_media_types[i].name);
|
|
|
|
if (sc->current_media != mxge_media_types[i].flag) {
|
|
mxge_media_init(sc);
|
|
mxge_media_set(sc, mxge_media_types[i].flag);
|
|
}
|
|
return;
|
|
}
|
|
}
|
|
if (mxge_verbose)
|
|
device_printf(sc->dev, "%s media 0x%x unknown\n",
|
|
cage_type, cmd.data0);
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
mxge_intr(void *arg)
|
|
{
|
|
struct mxge_slice_state *ss = arg;
|
|
mxge_softc_t *sc = ss->sc;
|
|
mcp_irq_data_t *stats = ss->fw_stats;
|
|
mxge_tx_ring_t *tx = &ss->tx;
|
|
mxge_rx_done_t *rx_done = &ss->rx_done;
|
|
uint32_t send_done_count;
|
|
uint8_t valid;
|
|
|
|
|
|
#ifndef IFNET_BUF_RING
|
|
/* an interrupt on a non-zero slice is implicitly valid
|
|
since MSI-X irqs are not shared */
|
|
if (ss != sc->ss) {
|
|
mxge_clean_rx_done(ss);
|
|
*ss->irq_claim = be32toh(3);
|
|
return;
|
|
}
|
|
#endif
|
|
|
|
/* make sure the DMA has finished */
|
|
if (!stats->valid) {
|
|
return;
|
|
}
|
|
valid = stats->valid;
|
|
|
|
if (sc->legacy_irq) {
|
|
/* lower legacy IRQ */
|
|
*sc->irq_deassert = 0;
|
|
if (!mxge_deassert_wait)
|
|
/* don't wait for conf. that irq is low */
|
|
stats->valid = 0;
|
|
} else {
|
|
stats->valid = 0;
|
|
}
|
|
|
|
/* loop while waiting for legacy irq deassertion */
|
|
do {
|
|
/* check for transmit completes and receives */
|
|
send_done_count = be32toh(stats->send_done_count);
|
|
while ((send_done_count != tx->pkt_done) ||
|
|
(rx_done->entry[rx_done->idx].length != 0)) {
|
|
if (send_done_count != tx->pkt_done)
|
|
mxge_tx_done(ss, (int)send_done_count);
|
|
mxge_clean_rx_done(ss);
|
|
send_done_count = be32toh(stats->send_done_count);
|
|
}
|
|
if (sc->legacy_irq && mxge_deassert_wait)
|
|
wmb();
|
|
} while (*((volatile uint8_t *) &stats->valid));
|
|
|
|
/* fw link & error stats meaningful only on the first slice */
|
|
if (__predict_false((ss == sc->ss) && stats->stats_updated)) {
|
|
if (sc->link_state != stats->link_up) {
|
|
sc->link_state = stats->link_up;
|
|
if (sc->link_state) {
|
|
if_link_state_change(sc->ifp, LINK_STATE_UP);
|
|
sc->ifp->if_baudrate = IF_Gbps(10UL);
|
|
if (mxge_verbose)
|
|
device_printf(sc->dev, "link up\n");
|
|
} else {
|
|
if_link_state_change(sc->ifp, LINK_STATE_DOWN);
|
|
sc->ifp->if_baudrate = 0;
|
|
if (mxge_verbose)
|
|
device_printf(sc->dev, "link down\n");
|
|
}
|
|
sc->need_media_probe = 1;
|
|
}
|
|
if (sc->rdma_tags_available !=
|
|
be32toh(stats->rdma_tags_available)) {
|
|
sc->rdma_tags_available =
|
|
be32toh(stats->rdma_tags_available);
|
|
device_printf(sc->dev, "RDMA timed out! %d tags "
|
|
"left\n", sc->rdma_tags_available);
|
|
}
|
|
|
|
if (stats->link_down) {
|
|
sc->down_cnt += stats->link_down;
|
|
sc->link_state = 0;
|
|
if_link_state_change(sc->ifp, LINK_STATE_DOWN);
|
|
}
|
|
}
|
|
|
|
/* check to see if we have rx token to pass back */
|
|
if (valid & 0x1)
|
|
*ss->irq_claim = be32toh(3);
|
|
*(ss->irq_claim + 1) = be32toh(3);
|
|
}
|
|
|
|
static void
|
|
mxge_init(void *arg)
|
|
{
|
|
mxge_softc_t *sc = arg;
|
|
struct ifnet *ifp = sc->ifp;
|
|
|
|
|
|
mtx_lock(&sc->driver_mtx);
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
|
|
(void) mxge_open(sc);
|
|
mtx_unlock(&sc->driver_mtx);
|
|
}
|
|
|
|
|
|
|
|
static void
|
|
mxge_free_slice_mbufs(struct mxge_slice_state *ss)
|
|
{
|
|
struct lro_entry *lro_entry;
|
|
int i;
|
|
|
|
while (!SLIST_EMPTY(&ss->lro_free)) {
|
|
lro_entry = SLIST_FIRST(&ss->lro_free);
|
|
SLIST_REMOVE_HEAD(&ss->lro_free, next);
|
|
free(lro_entry, M_DEVBUF);
|
|
}
|
|
|
|
for (i = 0; i <= ss->rx_big.mask; i++) {
|
|
if (ss->rx_big.info[i].m == NULL)
|
|
continue;
|
|
bus_dmamap_unload(ss->rx_big.dmat,
|
|
ss->rx_big.info[i].map);
|
|
m_freem(ss->rx_big.info[i].m);
|
|
ss->rx_big.info[i].m = NULL;
|
|
}
|
|
|
|
for (i = 0; i <= ss->rx_small.mask; i++) {
|
|
if (ss->rx_small.info[i].m == NULL)
|
|
continue;
|
|
bus_dmamap_unload(ss->rx_small.dmat,
|
|
ss->rx_small.info[i].map);
|
|
m_freem(ss->rx_small.info[i].m);
|
|
ss->rx_small.info[i].m = NULL;
|
|
}
|
|
|
|
/* transmit ring used only on the first slice */
|
|
if (ss->tx.info == NULL)
|
|
return;
|
|
|
|
for (i = 0; i <= ss->tx.mask; i++) {
|
|
ss->tx.info[i].flag = 0;
|
|
if (ss->tx.info[i].m == NULL)
|
|
continue;
|
|
bus_dmamap_unload(ss->tx.dmat,
|
|
ss->tx.info[i].map);
|
|
m_freem(ss->tx.info[i].m);
|
|
ss->tx.info[i].m = NULL;
|
|
}
|
|
}
|
|
|
|
static void
|
|
mxge_free_mbufs(mxge_softc_t *sc)
|
|
{
|
|
int slice;
|
|
|
|
for (slice = 0; slice < sc->num_slices; slice++)
|
|
mxge_free_slice_mbufs(&sc->ss[slice]);
|
|
}
|
|
|
|
static void
|
|
mxge_free_slice_rings(struct mxge_slice_state *ss)
|
|
{
|
|
int i;
|
|
|
|
|
|
if (ss->rx_done.entry != NULL)
|
|
mxge_dma_free(&ss->rx_done.dma);
|
|
ss->rx_done.entry = NULL;
|
|
|
|
if (ss->tx.req_bytes != NULL)
|
|
free(ss->tx.req_bytes, M_DEVBUF);
|
|
ss->tx.req_bytes = NULL;
|
|
|
|
if (ss->tx.seg_list != NULL)
|
|
free(ss->tx.seg_list, M_DEVBUF);
|
|
ss->tx.seg_list = NULL;
|
|
|
|
if (ss->rx_small.shadow != NULL)
|
|
free(ss->rx_small.shadow, M_DEVBUF);
|
|
ss->rx_small.shadow = NULL;
|
|
|
|
if (ss->rx_big.shadow != NULL)
|
|
free(ss->rx_big.shadow, M_DEVBUF);
|
|
ss->rx_big.shadow = NULL;
|
|
|
|
if (ss->tx.info != NULL) {
|
|
if (ss->tx.dmat != NULL) {
|
|
for (i = 0; i <= ss->tx.mask; i++) {
|
|
bus_dmamap_destroy(ss->tx.dmat,
|
|
ss->tx.info[i].map);
|
|
}
|
|
bus_dma_tag_destroy(ss->tx.dmat);
|
|
}
|
|
free(ss->tx.info, M_DEVBUF);
|
|
}
|
|
ss->tx.info = NULL;
|
|
|
|
if (ss->rx_small.info != NULL) {
|
|
if (ss->rx_small.dmat != NULL) {
|
|
for (i = 0; i <= ss->rx_small.mask; i++) {
|
|
bus_dmamap_destroy(ss->rx_small.dmat,
|
|
ss->rx_small.info[i].map);
|
|
}
|
|
bus_dmamap_destroy(ss->rx_small.dmat,
|
|
ss->rx_small.extra_map);
|
|
bus_dma_tag_destroy(ss->rx_small.dmat);
|
|
}
|
|
free(ss->rx_small.info, M_DEVBUF);
|
|
}
|
|
ss->rx_small.info = NULL;
|
|
|
|
if (ss->rx_big.info != NULL) {
|
|
if (ss->rx_big.dmat != NULL) {
|
|
for (i = 0; i <= ss->rx_big.mask; i++) {
|
|
bus_dmamap_destroy(ss->rx_big.dmat,
|
|
ss->rx_big.info[i].map);
|
|
}
|
|
bus_dmamap_destroy(ss->rx_big.dmat,
|
|
ss->rx_big.extra_map);
|
|
bus_dma_tag_destroy(ss->rx_big.dmat);
|
|
}
|
|
free(ss->rx_big.info, M_DEVBUF);
|
|
}
|
|
ss->rx_big.info = NULL;
|
|
}
|
|
|
|
static void
|
|
mxge_free_rings(mxge_softc_t *sc)
|
|
{
|
|
int slice;
|
|
|
|
for (slice = 0; slice < sc->num_slices; slice++)
|
|
mxge_free_slice_rings(&sc->ss[slice]);
|
|
}
|
|
|
|
static int
|
|
mxge_alloc_slice_rings(struct mxge_slice_state *ss, int rx_ring_entries,
|
|
int tx_ring_entries)
|
|
{
|
|
mxge_softc_t *sc = ss->sc;
|
|
size_t bytes;
|
|
int err, i;
|
|
|
|
err = ENOMEM;
|
|
|
|
/* allocate per-slice receive resources */
|
|
|
|
ss->rx_small.mask = ss->rx_big.mask = rx_ring_entries - 1;
|
|
ss->rx_done.mask = (2 * rx_ring_entries) - 1;
|
|
|
|
/* allocate the rx shadow rings */
|
|
bytes = rx_ring_entries * sizeof (*ss->rx_small.shadow);
|
|
ss->rx_small.shadow = malloc(bytes, M_DEVBUF, M_ZERO|M_WAITOK);
|
|
if (ss->rx_small.shadow == NULL)
|
|
return err;
|
|
|
|
bytes = rx_ring_entries * sizeof (*ss->rx_big.shadow);
|
|
ss->rx_big.shadow = malloc(bytes, M_DEVBUF, M_ZERO|M_WAITOK);
|
|
if (ss->rx_big.shadow == NULL)
|
|
return err;
|
|
|
|
/* allocate the rx host info rings */
|
|
bytes = rx_ring_entries * sizeof (*ss->rx_small.info);
|
|
ss->rx_small.info = malloc(bytes, M_DEVBUF, M_ZERO|M_WAITOK);
|
|
if (ss->rx_small.info == NULL)
|
|
return err;
|
|
|
|
bytes = rx_ring_entries * sizeof (*ss->rx_big.info);
|
|
ss->rx_big.info = malloc(bytes, M_DEVBUF, M_ZERO|M_WAITOK);
|
|
if (ss->rx_big.info == NULL)
|
|
return err;
|
|
|
|
/* allocate the rx busdma resources */
|
|
err = bus_dma_tag_create(sc->parent_dmat, /* parent */
|
|
1, /* alignment */
|
|
4096, /* boundary */
|
|
BUS_SPACE_MAXADDR, /* low */
|
|
BUS_SPACE_MAXADDR, /* high */
|
|
NULL, NULL, /* filter */
|
|
MHLEN, /* maxsize */
|
|
1, /* num segs */
|
|
MHLEN, /* maxsegsize */
|
|
BUS_DMA_ALLOCNOW, /* flags */
|
|
NULL, NULL, /* lock */
|
|
&ss->rx_small.dmat); /* tag */
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Err %d allocating rx_small dmat\n",
|
|
err);
|
|
return err;
|
|
}
|
|
|
|
err = bus_dma_tag_create(sc->parent_dmat, /* parent */
|
|
1, /* alignment */
|
|
#if MXGE_VIRT_JUMBOS
|
|
4096, /* boundary */
|
|
#else
|
|
0, /* boundary */
|
|
#endif
|
|
BUS_SPACE_MAXADDR, /* low */
|
|
BUS_SPACE_MAXADDR, /* high */
|
|
NULL, NULL, /* filter */
|
|
3*4096, /* maxsize */
|
|
#if MXGE_VIRT_JUMBOS
|
|
3, /* num segs */
|
|
4096, /* maxsegsize*/
|
|
#else
|
|
1, /* num segs */
|
|
MJUM9BYTES, /* maxsegsize*/
|
|
#endif
|
|
BUS_DMA_ALLOCNOW, /* flags */
|
|
NULL, NULL, /* lock */
|
|
&ss->rx_big.dmat); /* tag */
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Err %d allocating rx_big dmat\n",
|
|
err);
|
|
return err;
|
|
}
|
|
for (i = 0; i <= ss->rx_small.mask; i++) {
|
|
err = bus_dmamap_create(ss->rx_small.dmat, 0,
|
|
&ss->rx_small.info[i].map);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Err %d rx_small dmamap\n",
|
|
err);
|
|
return err;
|
|
}
|
|
}
|
|
err = bus_dmamap_create(ss->rx_small.dmat, 0,
|
|
&ss->rx_small.extra_map);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Err %d extra rx_small dmamap\n",
|
|
err);
|
|
return err;
|
|
}
|
|
|
|
for (i = 0; i <= ss->rx_big.mask; i++) {
|
|
err = bus_dmamap_create(ss->rx_big.dmat, 0,
|
|
&ss->rx_big.info[i].map);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Err %d rx_big dmamap\n",
|
|
err);
|
|
return err;
|
|
}
|
|
}
|
|
err = bus_dmamap_create(ss->rx_big.dmat, 0,
|
|
&ss->rx_big.extra_map);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Err %d extra rx_big dmamap\n",
|
|
err);
|
|
return err;
|
|
}
|
|
|
|
/* now allocate TX resouces */
|
|
|
|
#ifndef IFNET_BUF_RING
|
|
/* only use a single TX ring for now */
|
|
if (ss != ss->sc->ss)
|
|
return 0;
|
|
#endif
|
|
|
|
ss->tx.mask = tx_ring_entries - 1;
|
|
ss->tx.max_desc = MIN(MXGE_MAX_SEND_DESC, tx_ring_entries / 4);
|
|
|
|
|
|
/* allocate the tx request copy block */
|
|
bytes = 8 +
|
|
sizeof (*ss->tx.req_list) * (ss->tx.max_desc + 4);
|
|
ss->tx.req_bytes = malloc(bytes, M_DEVBUF, M_WAITOK);
|
|
if (ss->tx.req_bytes == NULL)
|
|
return err;
|
|
/* ensure req_list entries are aligned to 8 bytes */
|
|
ss->tx.req_list = (mcp_kreq_ether_send_t *)
|
|
((unsigned long)(ss->tx.req_bytes + 7) & ~7UL);
|
|
|
|
/* allocate the tx busdma segment list */
|
|
bytes = sizeof (*ss->tx.seg_list) * ss->tx.max_desc;
|
|
ss->tx.seg_list = (bus_dma_segment_t *)
|
|
malloc(bytes, M_DEVBUF, M_WAITOK);
|
|
if (ss->tx.seg_list == NULL)
|
|
return err;
|
|
|
|
/* allocate the tx host info ring */
|
|
bytes = tx_ring_entries * sizeof (*ss->tx.info);
|
|
ss->tx.info = malloc(bytes, M_DEVBUF, M_ZERO|M_WAITOK);
|
|
if (ss->tx.info == NULL)
|
|
return err;
|
|
|
|
/* allocate the tx busdma resources */
|
|
err = bus_dma_tag_create(sc->parent_dmat, /* parent */
|
|
1, /* alignment */
|
|
sc->tx_boundary, /* boundary */
|
|
BUS_SPACE_MAXADDR, /* low */
|
|
BUS_SPACE_MAXADDR, /* high */
|
|
NULL, NULL, /* filter */
|
|
65536 + 256, /* maxsize */
|
|
ss->tx.max_desc - 2, /* num segs */
|
|
sc->tx_boundary, /* maxsegsz */
|
|
BUS_DMA_ALLOCNOW, /* flags */
|
|
NULL, NULL, /* lock */
|
|
&ss->tx.dmat); /* tag */
|
|
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Err %d allocating tx dmat\n",
|
|
err);
|
|
return err;
|
|
}
|
|
|
|
/* now use these tags to setup dmamaps for each slot
|
|
in the ring */
|
|
for (i = 0; i <= ss->tx.mask; i++) {
|
|
err = bus_dmamap_create(ss->tx.dmat, 0,
|
|
&ss->tx.info[i].map);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Err %d tx dmamap\n",
|
|
err);
|
|
return err;
|
|
}
|
|
}
|
|
return 0;
|
|
|
|
}
|
|
|
|
static int
|
|
mxge_alloc_rings(mxge_softc_t *sc)
|
|
{
|
|
mxge_cmd_t cmd;
|
|
int tx_ring_size;
|
|
int tx_ring_entries, rx_ring_entries;
|
|
int err, slice;
|
|
|
|
/* get ring sizes */
|
|
err = mxge_send_cmd(sc, MXGEFW_CMD_GET_SEND_RING_SIZE, &cmd);
|
|
tx_ring_size = cmd.data0;
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Cannot determine tx ring sizes\n");
|
|
goto abort;
|
|
}
|
|
|
|
tx_ring_entries = tx_ring_size / sizeof (mcp_kreq_ether_send_t);
|
|
rx_ring_entries = sc->rx_ring_size / sizeof (mcp_dma_addr_t);
|
|
IFQ_SET_MAXLEN(&sc->ifp->if_snd, tx_ring_entries - 1);
|
|
sc->ifp->if_snd.ifq_drv_maxlen = sc->ifp->if_snd.ifq_maxlen;
|
|
IFQ_SET_READY(&sc->ifp->if_snd);
|
|
|
|
for (slice = 0; slice < sc->num_slices; slice++) {
|
|
err = mxge_alloc_slice_rings(&sc->ss[slice],
|
|
rx_ring_entries,
|
|
tx_ring_entries);
|
|
if (err != 0)
|
|
goto abort;
|
|
}
|
|
return 0;
|
|
|
|
abort:
|
|
mxge_free_rings(sc);
|
|
return err;
|
|
|
|
}
|
|
|
|
|
|
static void
|
|
mxge_choose_params(int mtu, int *big_buf_size, int *cl_size, int *nbufs)
|
|
{
|
|
int bufsize = mtu + ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN + MXGEFW_PAD;
|
|
|
|
if (bufsize < MCLBYTES) {
|
|
/* easy, everything fits in a single buffer */
|
|
*big_buf_size = MCLBYTES;
|
|
*cl_size = MCLBYTES;
|
|
*nbufs = 1;
|
|
return;
|
|
}
|
|
|
|
if (bufsize < MJUMPAGESIZE) {
|
|
/* still easy, everything still fits in a single buffer */
|
|
*big_buf_size = MJUMPAGESIZE;
|
|
*cl_size = MJUMPAGESIZE;
|
|
*nbufs = 1;
|
|
return;
|
|
}
|
|
#if MXGE_VIRT_JUMBOS
|
|
/* now we need to use virtually contiguous buffers */
|
|
*cl_size = MJUM9BYTES;
|
|
*big_buf_size = 4096;
|
|
*nbufs = mtu / 4096 + 1;
|
|
/* needs to be a power of two, so round up */
|
|
if (*nbufs == 3)
|
|
*nbufs = 4;
|
|
#else
|
|
*cl_size = MJUM9BYTES;
|
|
*big_buf_size = MJUM9BYTES;
|
|
*nbufs = 1;
|
|
#endif
|
|
}
|
|
|
|
static int
|
|
mxge_slice_open(struct mxge_slice_state *ss, int nbufs, int cl_size)
|
|
{
|
|
mxge_softc_t *sc;
|
|
mxge_cmd_t cmd;
|
|
bus_dmamap_t map;
|
|
struct lro_entry *lro_entry;
|
|
int err, i, slice;
|
|
|
|
|
|
sc = ss->sc;
|
|
slice = ss - sc->ss;
|
|
|
|
SLIST_INIT(&ss->lro_free);
|
|
SLIST_INIT(&ss->lro_active);
|
|
|
|
for (i = 0; i < sc->lro_cnt; i++) {
|
|
lro_entry = (struct lro_entry *)
|
|
malloc(sizeof (*lro_entry), M_DEVBUF,
|
|
M_NOWAIT | M_ZERO);
|
|
if (lro_entry == NULL) {
|
|
sc->lro_cnt = i;
|
|
break;
|
|
}
|
|
SLIST_INSERT_HEAD(&ss->lro_free, lro_entry, next);
|
|
}
|
|
/* get the lanai pointers to the send and receive rings */
|
|
|
|
err = 0;
|
|
#ifndef IFNET_BUF_RING
|
|
/* We currently only send from the first slice */
|
|
if (slice == 0) {
|
|
#endif
|
|
cmd.data0 = slice;
|
|
err = mxge_send_cmd(sc, MXGEFW_CMD_GET_SEND_OFFSET, &cmd);
|
|
ss->tx.lanai =
|
|
(volatile mcp_kreq_ether_send_t *)(sc->sram + cmd.data0);
|
|
ss->tx.send_go = (volatile uint32_t *)
|
|
(sc->sram + MXGEFW_ETH_SEND_GO + 64 * slice);
|
|
ss->tx.send_stop = (volatile uint32_t *)
|
|
(sc->sram + MXGEFW_ETH_SEND_STOP + 64 * slice);
|
|
#ifndef IFNET_BUF_RING
|
|
}
|
|
#endif
|
|
cmd.data0 = slice;
|
|
err |= mxge_send_cmd(sc,
|
|
MXGEFW_CMD_GET_SMALL_RX_OFFSET, &cmd);
|
|
ss->rx_small.lanai =
|
|
(volatile mcp_kreq_ether_recv_t *)(sc->sram + cmd.data0);
|
|
cmd.data0 = slice;
|
|
err |= mxge_send_cmd(sc, MXGEFW_CMD_GET_BIG_RX_OFFSET, &cmd);
|
|
ss->rx_big.lanai =
|
|
(volatile mcp_kreq_ether_recv_t *)(sc->sram + cmd.data0);
|
|
|
|
if (err != 0) {
|
|
device_printf(sc->dev,
|
|
"failed to get ring sizes or locations\n");
|
|
return EIO;
|
|
}
|
|
|
|
/* stock receive rings */
|
|
for (i = 0; i <= ss->rx_small.mask; i++) {
|
|
map = ss->rx_small.info[i].map;
|
|
err = mxge_get_buf_small(ss, map, i);
|
|
if (err) {
|
|
device_printf(sc->dev, "alloced %d/%d smalls\n",
|
|
i, ss->rx_small.mask + 1);
|
|
return ENOMEM;
|
|
}
|
|
}
|
|
for (i = 0; i <= ss->rx_big.mask; i++) {
|
|
ss->rx_big.shadow[i].addr_low = 0xffffffff;
|
|
ss->rx_big.shadow[i].addr_high = 0xffffffff;
|
|
}
|
|
ss->rx_big.nbufs = nbufs;
|
|
ss->rx_big.cl_size = cl_size;
|
|
ss->rx_big.mlen = ss->sc->ifp->if_mtu + ETHER_HDR_LEN +
|
|
ETHER_VLAN_ENCAP_LEN + MXGEFW_PAD;
|
|
for (i = 0; i <= ss->rx_big.mask; i += ss->rx_big.nbufs) {
|
|
map = ss->rx_big.info[i].map;
|
|
err = mxge_get_buf_big(ss, map, i);
|
|
if (err) {
|
|
device_printf(sc->dev, "alloced %d/%d bigs\n",
|
|
i, ss->rx_big.mask + 1);
|
|
return ENOMEM;
|
|
}
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mxge_open(mxge_softc_t *sc)
|
|
{
|
|
mxge_cmd_t cmd;
|
|
int err, big_bytes, nbufs, slice, cl_size, i;
|
|
bus_addr_t bus;
|
|
volatile uint8_t *itable;
|
|
struct mxge_slice_state *ss;
|
|
|
|
/* Copy the MAC address in case it was overridden */
|
|
bcopy(IF_LLADDR(sc->ifp), sc->mac_addr, ETHER_ADDR_LEN);
|
|
|
|
err = mxge_reset(sc, 1);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "failed to reset\n");
|
|
return EIO;
|
|
}
|
|
|
|
if (sc->num_slices > 1) {
|
|
/* setup the indirection table */
|
|
cmd.data0 = sc->num_slices;
|
|
err = mxge_send_cmd(sc, MXGEFW_CMD_SET_RSS_TABLE_SIZE,
|
|
&cmd);
|
|
|
|
err |= mxge_send_cmd(sc, MXGEFW_CMD_GET_RSS_TABLE_OFFSET,
|
|
&cmd);
|
|
if (err != 0) {
|
|
device_printf(sc->dev,
|
|
"failed to setup rss tables\n");
|
|
return err;
|
|
}
|
|
|
|
/* just enable an identity mapping */
|
|
itable = sc->sram + cmd.data0;
|
|
for (i = 0; i < sc->num_slices; i++)
|
|
itable[i] = (uint8_t)i;
|
|
|
|
cmd.data0 = 1;
|
|
cmd.data1 = mxge_rss_hash_type;
|
|
err = mxge_send_cmd(sc, MXGEFW_CMD_SET_RSS_ENABLE, &cmd);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "failed to enable slices\n");
|
|
return err;
|
|
}
|
|
}
|
|
|
|
|
|
mxge_choose_params(sc->ifp->if_mtu, &big_bytes, &cl_size, &nbufs);
|
|
|
|
cmd.data0 = nbufs;
|
|
err = mxge_send_cmd(sc, MXGEFW_CMD_ALWAYS_USE_N_BIG_BUFFERS,
|
|
&cmd);
|
|
/* error is only meaningful if we're trying to set
|
|
MXGEFW_CMD_ALWAYS_USE_N_BIG_BUFFERS > 1 */
|
|
if (err && nbufs > 1) {
|
|
device_printf(sc->dev,
|
|
"Failed to set alway-use-n to %d\n",
|
|
nbufs);
|
|
return EIO;
|
|
}
|
|
/* Give the firmware the mtu and the big and small buffer
|
|
sizes. The firmware wants the big buf size to be a power
|
|
of two. Luckily, FreeBSD's clusters are powers of two */
|
|
cmd.data0 = sc->ifp->if_mtu + ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN;
|
|
err = mxge_send_cmd(sc, MXGEFW_CMD_SET_MTU, &cmd);
|
|
cmd.data0 = MHLEN - MXGEFW_PAD;
|
|
err |= mxge_send_cmd(sc, MXGEFW_CMD_SET_SMALL_BUFFER_SIZE,
|
|
&cmd);
|
|
cmd.data0 = big_bytes;
|
|
err |= mxge_send_cmd(sc, MXGEFW_CMD_SET_BIG_BUFFER_SIZE, &cmd);
|
|
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "failed to setup params\n");
|
|
goto abort;
|
|
}
|
|
|
|
/* Now give him the pointer to the stats block */
|
|
for (slice = 0;
|
|
#ifdef IFNET_BUF_RING
|
|
slice < sc->num_slices;
|
|
#else
|
|
slice < 1;
|
|
#endif
|
|
slice++) {
|
|
ss = &sc->ss[slice];
|
|
cmd.data0 =
|
|
MXGE_LOWPART_TO_U32(ss->fw_stats_dma.bus_addr);
|
|
cmd.data1 =
|
|
MXGE_HIGHPART_TO_U32(ss->fw_stats_dma.bus_addr);
|
|
cmd.data2 = sizeof(struct mcp_irq_data);
|
|
cmd.data2 |= (slice << 16);
|
|
err |= mxge_send_cmd(sc, MXGEFW_CMD_SET_STATS_DMA_V2, &cmd);
|
|
}
|
|
|
|
if (err != 0) {
|
|
bus = sc->ss->fw_stats_dma.bus_addr;
|
|
bus += offsetof(struct mcp_irq_data, send_done_count);
|
|
cmd.data0 = MXGE_LOWPART_TO_U32(bus);
|
|
cmd.data1 = MXGE_HIGHPART_TO_U32(bus);
|
|
err = mxge_send_cmd(sc,
|
|
MXGEFW_CMD_SET_STATS_DMA_OBSOLETE,
|
|
&cmd);
|
|
/* Firmware cannot support multicast without STATS_DMA_V2 */
|
|
sc->fw_multicast_support = 0;
|
|
} else {
|
|
sc->fw_multicast_support = 1;
|
|
}
|
|
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "failed to setup params\n");
|
|
goto abort;
|
|
}
|
|
|
|
for (slice = 0; slice < sc->num_slices; slice++) {
|
|
err = mxge_slice_open(&sc->ss[slice], nbufs, cl_size);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "couldn't open slice %d\n",
|
|
slice);
|
|
goto abort;
|
|
}
|
|
}
|
|
|
|
/* Finally, start the firmware running */
|
|
err = mxge_send_cmd(sc, MXGEFW_CMD_ETHERNET_UP, &cmd);
|
|
if (err) {
|
|
device_printf(sc->dev, "Couldn't bring up link\n");
|
|
goto abort;
|
|
}
|
|
#ifdef IFNET_BUF_RING
|
|
for (slice = 0; slice < sc->num_slices; slice++) {
|
|
ss = &sc->ss[slice];
|
|
ss->if_drv_flags |= IFF_DRV_RUNNING;
|
|
ss->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
}
|
|
#endif
|
|
sc->ifp->if_drv_flags |= IFF_DRV_RUNNING;
|
|
sc->ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
|
|
return 0;
|
|
|
|
|
|
abort:
|
|
mxge_free_mbufs(sc);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
mxge_close(mxge_softc_t *sc, int down)
|
|
{
|
|
mxge_cmd_t cmd;
|
|
int err, old_down_cnt;
|
|
#ifdef IFNET_BUF_RING
|
|
struct mxge_slice_state *ss;
|
|
int slice;
|
|
#endif
|
|
|
|
#ifdef IFNET_BUF_RING
|
|
for (slice = 0; slice < sc->num_slices; slice++) {
|
|
ss = &sc->ss[slice];
|
|
ss->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
}
|
|
#endif
|
|
sc->ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
if (!down) {
|
|
old_down_cnt = sc->down_cnt;
|
|
wmb();
|
|
err = mxge_send_cmd(sc, MXGEFW_CMD_ETHERNET_DOWN, &cmd);
|
|
if (err) {
|
|
device_printf(sc->dev,
|
|
"Couldn't bring down link\n");
|
|
}
|
|
if (old_down_cnt == sc->down_cnt) {
|
|
/* wait for down irq */
|
|
DELAY(10 * sc->intr_coal_delay);
|
|
}
|
|
wmb();
|
|
if (old_down_cnt == sc->down_cnt) {
|
|
device_printf(sc->dev, "never got down irq\n");
|
|
}
|
|
}
|
|
mxge_free_mbufs(sc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void
|
|
mxge_setup_cfg_space(mxge_softc_t *sc)
|
|
{
|
|
device_t dev = sc->dev;
|
|
int reg;
|
|
uint16_t cmd, lnk, pectl;
|
|
|
|
/* find the PCIe link width and set max read request to 4KB*/
|
|
if (pci_find_cap(dev, PCIY_EXPRESS, ®) == 0) {
|
|
lnk = pci_read_config(dev, reg + 0x12, 2);
|
|
sc->link_width = (lnk >> 4) & 0x3f;
|
|
|
|
if (sc->pectl == 0) {
|
|
pectl = pci_read_config(dev, reg + 0x8, 2);
|
|
pectl = (pectl & ~0x7000) | (5 << 12);
|
|
pci_write_config(dev, reg + 0x8, pectl, 2);
|
|
sc->pectl = pectl;
|
|
} else {
|
|
/* restore saved pectl after watchdog reset */
|
|
pci_write_config(dev, reg + 0x8, sc->pectl, 2);
|
|
}
|
|
}
|
|
|
|
/* Enable DMA and Memory space access */
|
|
pci_enable_busmaster(dev);
|
|
cmd = pci_read_config(dev, PCIR_COMMAND, 2);
|
|
cmd |= PCIM_CMD_MEMEN;
|
|
pci_write_config(dev, PCIR_COMMAND, cmd, 2);
|
|
}
|
|
|
|
static uint32_t
|
|
mxge_read_reboot(mxge_softc_t *sc)
|
|
{
|
|
device_t dev = sc->dev;
|
|
uint32_t vs;
|
|
|
|
/* find the vendor specific offset */
|
|
if (pci_find_cap(dev, PCIY_VENDOR, &vs) != 0) {
|
|
device_printf(sc->dev,
|
|
"could not find vendor specific offset\n");
|
|
return (uint32_t)-1;
|
|
}
|
|
/* enable read32 mode */
|
|
pci_write_config(dev, vs + 0x10, 0x3, 1);
|
|
/* tell NIC which register to read */
|
|
pci_write_config(dev, vs + 0x18, 0xfffffff0, 4);
|
|
return (pci_read_config(dev, vs + 0x14, 4));
|
|
}
|
|
|
|
static void
|
|
mxge_watchdog_reset(mxge_softc_t *sc)
|
|
{
|
|
struct pci_devinfo *dinfo;
|
|
struct mxge_slice_state *ss;
|
|
int err, running, s, num_tx_slices = 1;
|
|
uint32_t reboot;
|
|
uint16_t cmd;
|
|
|
|
err = ENXIO;
|
|
|
|
device_printf(sc->dev, "Watchdog reset!\n");
|
|
|
|
/*
|
|
* check to see if the NIC rebooted. If it did, then all of
|
|
* PCI config space has been reset, and things like the
|
|
* busmaster bit will be zero. If this is the case, then we
|
|
* must restore PCI config space before the NIC can be used
|
|
* again
|
|
*/
|
|
cmd = pci_read_config(sc->dev, PCIR_COMMAND, 2);
|
|
if (cmd == 0xffff) {
|
|
/*
|
|
* maybe the watchdog caught the NIC rebooting; wait
|
|
* up to 100ms for it to finish. If it does not come
|
|
* back, then give up
|
|
*/
|
|
DELAY(1000*100);
|
|
cmd = pci_read_config(sc->dev, PCIR_COMMAND, 2);
|
|
if (cmd == 0xffff) {
|
|
device_printf(sc->dev, "NIC disappeared!\n");
|
|
}
|
|
}
|
|
if ((cmd & PCIM_CMD_BUSMASTEREN) == 0) {
|
|
/* print the reboot status */
|
|
reboot = mxge_read_reboot(sc);
|
|
device_printf(sc->dev, "NIC rebooted, status = 0x%x\n",
|
|
reboot);
|
|
running = sc->ifp->if_drv_flags & IFF_DRV_RUNNING;
|
|
if (running) {
|
|
|
|
/*
|
|
* quiesce NIC so that TX routines will not try to
|
|
* xmit after restoration of BAR
|
|
*/
|
|
|
|
/* Mark the link as down */
|
|
if (sc->link_state) {
|
|
sc->link_state = 0;
|
|
if_link_state_change(sc->ifp,
|
|
LINK_STATE_DOWN);
|
|
}
|
|
#ifdef IFNET_BUF_RING
|
|
num_tx_slices = sc->num_slices;
|
|
#endif
|
|
/* grab all TX locks to ensure no tx */
|
|
for (s = 0; s < num_tx_slices; s++) {
|
|
ss = &sc->ss[s];
|
|
mtx_lock(&ss->tx.mtx);
|
|
}
|
|
mxge_close(sc, 1);
|
|
}
|
|
/* restore PCI configuration space */
|
|
dinfo = device_get_ivars(sc->dev);
|
|
pci_cfg_restore(sc->dev, dinfo);
|
|
|
|
/* and redo any changes we made to our config space */
|
|
mxge_setup_cfg_space(sc);
|
|
|
|
/* reload f/w */
|
|
err = mxge_load_firmware(sc, 0);
|
|
if (err) {
|
|
device_printf(sc->dev,
|
|
"Unable to re-load f/w\n");
|
|
}
|
|
if (running) {
|
|
if (!err)
|
|
err = mxge_open(sc);
|
|
/* release all TX locks */
|
|
for (s = 0; s < num_tx_slices; s++) {
|
|
ss = &sc->ss[s];
|
|
#ifdef IFNET_BUF_RING
|
|
mxge_start_locked(ss);
|
|
#endif
|
|
mtx_unlock(&ss->tx.mtx);
|
|
}
|
|
}
|
|
sc->watchdog_resets++;
|
|
} else {
|
|
device_printf(sc->dev,
|
|
"NIC did not reboot, not resetting\n");
|
|
err = 0;
|
|
}
|
|
if (err) {
|
|
device_printf(sc->dev, "watchdog reset failed\n");
|
|
} else {
|
|
if (sc->dying == 2)
|
|
sc->dying = 0;
|
|
callout_reset(&sc->co_hdl, mxge_ticks, mxge_tick, sc);
|
|
}
|
|
}
|
|
|
|
static void
|
|
mxge_watchdog_task(void *arg, int pending)
|
|
{
|
|
mxge_softc_t *sc = arg;
|
|
|
|
|
|
mtx_lock(&sc->driver_mtx);
|
|
mxge_watchdog_reset(sc);
|
|
mtx_unlock(&sc->driver_mtx);
|
|
}
|
|
|
|
static void
|
|
mxge_warn_stuck(mxge_softc_t *sc, mxge_tx_ring_t *tx, int slice)
|
|
{
|
|
tx = &sc->ss[slice].tx;
|
|
device_printf(sc->dev, "slice %d struck? ring state:\n", slice);
|
|
device_printf(sc->dev,
|
|
"tx.req=%d tx.done=%d, tx.queue_active=%d\n",
|
|
tx->req, tx->done, tx->queue_active);
|
|
device_printf(sc->dev, "tx.activate=%d tx.deactivate=%d\n",
|
|
tx->activate, tx->deactivate);
|
|
device_printf(sc->dev, "pkt_done=%d fw=%d\n",
|
|
tx->pkt_done,
|
|
be32toh(sc->ss->fw_stats->send_done_count));
|
|
}
|
|
|
|
static int
|
|
mxge_watchdog(mxge_softc_t *sc)
|
|
{
|
|
mxge_tx_ring_t *tx;
|
|
uint32_t rx_pause = be32toh(sc->ss->fw_stats->dropped_pause);
|
|
int i, err = 0;
|
|
|
|
/* see if we have outstanding transmits, which
|
|
have been pending for more than mxge_ticks */
|
|
for (i = 0;
|
|
#ifdef IFNET_BUF_RING
|
|
(i < sc->num_slices) && (err == 0);
|
|
#else
|
|
(i < 1) && (err == 0);
|
|
#endif
|
|
i++) {
|
|
tx = &sc->ss[i].tx;
|
|
if (tx->req != tx->done &&
|
|
tx->watchdog_req != tx->watchdog_done &&
|
|
tx->done == tx->watchdog_done) {
|
|
/* check for pause blocking before resetting */
|
|
if (tx->watchdog_rx_pause == rx_pause) {
|
|
mxge_warn_stuck(sc, tx, i);
|
|
taskqueue_enqueue(sc->tq, &sc->watchdog_task);
|
|
return (ENXIO);
|
|
}
|
|
else
|
|
device_printf(sc->dev, "Flow control blocking "
|
|
"xmits, check link partner\n");
|
|
}
|
|
|
|
tx->watchdog_req = tx->req;
|
|
tx->watchdog_done = tx->done;
|
|
tx->watchdog_rx_pause = rx_pause;
|
|
}
|
|
|
|
if (sc->need_media_probe)
|
|
mxge_media_probe(sc);
|
|
return (err);
|
|
}
|
|
|
|
static u_long
|
|
mxge_update_stats(mxge_softc_t *sc)
|
|
{
|
|
struct mxge_slice_state *ss;
|
|
u_long pkts = 0;
|
|
u_long ipackets = 0;
|
|
u_long opackets = 0;
|
|
#ifdef IFNET_BUF_RING
|
|
u_long obytes = 0;
|
|
u_long omcasts = 0;
|
|
u_long odrops = 0;
|
|
#endif
|
|
u_long oerrors = 0;
|
|
int slice;
|
|
|
|
for (slice = 0; slice < sc->num_slices; slice++) {
|
|
ss = &sc->ss[slice];
|
|
ipackets += ss->ipackets;
|
|
opackets += ss->opackets;
|
|
#ifdef IFNET_BUF_RING
|
|
obytes += ss->obytes;
|
|
omcasts += ss->omcasts;
|
|
odrops += ss->tx.br->br_drops;
|
|
#endif
|
|
oerrors += ss->oerrors;
|
|
}
|
|
pkts = (ipackets - sc->ifp->if_ipackets);
|
|
pkts += (opackets - sc->ifp->if_opackets);
|
|
sc->ifp->if_ipackets = ipackets;
|
|
sc->ifp->if_opackets = opackets;
|
|
#ifdef IFNET_BUF_RING
|
|
sc->ifp->if_obytes = obytes;
|
|
sc->ifp->if_omcasts = omcasts;
|
|
sc->ifp->if_snd.ifq_drops = odrops;
|
|
#endif
|
|
sc->ifp->if_oerrors = oerrors;
|
|
return pkts;
|
|
}
|
|
|
|
static void
|
|
mxge_tick(void *arg)
|
|
{
|
|
mxge_softc_t *sc = arg;
|
|
u_long pkts = 0;
|
|
int err = 0;
|
|
int running, ticks;
|
|
uint16_t cmd;
|
|
|
|
ticks = mxge_ticks;
|
|
running = sc->ifp->if_drv_flags & IFF_DRV_RUNNING;
|
|
if (running) {
|
|
/* aggregate stats from different slices */
|
|
pkts = mxge_update_stats(sc);
|
|
if (!sc->watchdog_countdown) {
|
|
err = mxge_watchdog(sc);
|
|
sc->watchdog_countdown = 4;
|
|
}
|
|
sc->watchdog_countdown--;
|
|
}
|
|
if (pkts == 0) {
|
|
/* ensure NIC did not suffer h/w fault while idle */
|
|
cmd = pci_read_config(sc->dev, PCIR_COMMAND, 2);
|
|
if ((cmd & PCIM_CMD_BUSMASTEREN) == 0) {
|
|
sc->dying = 2;
|
|
taskqueue_enqueue(sc->tq, &sc->watchdog_task);
|
|
err = ENXIO;
|
|
}
|
|
/* look less often if NIC is idle */
|
|
ticks *= 4;
|
|
}
|
|
|
|
if (err == 0)
|
|
callout_reset(&sc->co_hdl, ticks, mxge_tick, sc);
|
|
|
|
}
|
|
|
|
static int
|
|
mxge_media_change(struct ifnet *ifp)
|
|
{
|
|
return EINVAL;
|
|
}
|
|
|
|
static int
|
|
mxge_change_mtu(mxge_softc_t *sc, int mtu)
|
|
{
|
|
struct ifnet *ifp = sc->ifp;
|
|
int real_mtu, old_mtu;
|
|
int err = 0;
|
|
|
|
|
|
real_mtu = mtu + ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN;
|
|
if ((real_mtu > sc->max_mtu) || real_mtu < 60)
|
|
return EINVAL;
|
|
mtx_lock(&sc->driver_mtx);
|
|
old_mtu = ifp->if_mtu;
|
|
ifp->if_mtu = mtu;
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
mxge_close(sc, 0);
|
|
err = mxge_open(sc);
|
|
if (err != 0) {
|
|
ifp->if_mtu = old_mtu;
|
|
mxge_close(sc, 0);
|
|
(void) mxge_open(sc);
|
|
}
|
|
}
|
|
mtx_unlock(&sc->driver_mtx);
|
|
return err;
|
|
}
|
|
|
|
static void
|
|
mxge_media_status(struct ifnet *ifp, struct ifmediareq *ifmr)
|
|
{
|
|
mxge_softc_t *sc = ifp->if_softc;
|
|
|
|
|
|
if (sc == NULL)
|
|
return;
|
|
ifmr->ifm_status = IFM_AVALID;
|
|
ifmr->ifm_active = IFM_ETHER | IFM_FDX;
|
|
ifmr->ifm_status |= sc->link_state ? IFM_ACTIVE : 0;
|
|
ifmr->ifm_active |= sc->current_media;
|
|
}
|
|
|
|
static int
|
|
mxge_ioctl(struct ifnet *ifp, u_long command, caddr_t data)
|
|
{
|
|
mxge_softc_t *sc = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *)data;
|
|
int err, mask;
|
|
|
|
err = 0;
|
|
switch (command) {
|
|
case SIOCSIFADDR:
|
|
case SIOCGIFADDR:
|
|
err = ether_ioctl(ifp, command, data);
|
|
break;
|
|
|
|
case SIOCSIFMTU:
|
|
err = mxge_change_mtu(sc, ifr->ifr_mtu);
|
|
break;
|
|
|
|
case SIOCSIFFLAGS:
|
|
mtx_lock(&sc->driver_mtx);
|
|
if (sc->dying) {
|
|
mtx_unlock(&sc->driver_mtx);
|
|
return EINVAL;
|
|
}
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) {
|
|
err = mxge_open(sc);
|
|
} else {
|
|
/* take care of promis can allmulti
|
|
flag chages */
|
|
mxge_change_promisc(sc,
|
|
ifp->if_flags & IFF_PROMISC);
|
|
mxge_set_multicast_list(sc);
|
|
}
|
|
} else {
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
mxge_close(sc, 0);
|
|
}
|
|
}
|
|
mtx_unlock(&sc->driver_mtx);
|
|
break;
|
|
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
mtx_lock(&sc->driver_mtx);
|
|
mxge_set_multicast_list(sc);
|
|
mtx_unlock(&sc->driver_mtx);
|
|
break;
|
|
|
|
case SIOCSIFCAP:
|
|
mtx_lock(&sc->driver_mtx);
|
|
mask = ifr->ifr_reqcap ^ ifp->if_capenable;
|
|
if (mask & IFCAP_TXCSUM) {
|
|
if (IFCAP_TXCSUM & ifp->if_capenable) {
|
|
ifp->if_capenable &= ~(IFCAP_TXCSUM|IFCAP_TSO4);
|
|
ifp->if_hwassist &= ~(CSUM_TCP | CSUM_UDP
|
|
| CSUM_TSO);
|
|
} else {
|
|
ifp->if_capenable |= IFCAP_TXCSUM;
|
|
ifp->if_hwassist |= (CSUM_TCP | CSUM_UDP);
|
|
}
|
|
} else if (mask & IFCAP_RXCSUM) {
|
|
if (IFCAP_RXCSUM & ifp->if_capenable) {
|
|
ifp->if_capenable &= ~IFCAP_RXCSUM;
|
|
sc->csum_flag = 0;
|
|
} else {
|
|
ifp->if_capenable |= IFCAP_RXCSUM;
|
|
sc->csum_flag = 1;
|
|
}
|
|
}
|
|
if (mask & IFCAP_TSO4) {
|
|
if (IFCAP_TSO4 & ifp->if_capenable) {
|
|
ifp->if_capenable &= ~IFCAP_TSO4;
|
|
ifp->if_hwassist &= ~CSUM_TSO;
|
|
} else if (IFCAP_TXCSUM & ifp->if_capenable) {
|
|
ifp->if_capenable |= IFCAP_TSO4;
|
|
ifp->if_hwassist |= CSUM_TSO;
|
|
} else {
|
|
printf("mxge requires tx checksum offload"
|
|
" be enabled to use TSO\n");
|
|
err = EINVAL;
|
|
}
|
|
}
|
|
if (mask & IFCAP_LRO) {
|
|
if (IFCAP_LRO & ifp->if_capenable)
|
|
err = mxge_change_lro_locked(sc, 0);
|
|
else
|
|
err = mxge_change_lro_locked(sc, mxge_lro_cnt);
|
|
}
|
|
if (mask & IFCAP_VLAN_HWTAGGING)
|
|
ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING;
|
|
if (mask & IFCAP_VLAN_HWTSO)
|
|
ifp->if_capenable ^= IFCAP_VLAN_HWTSO;
|
|
|
|
if (!(ifp->if_capabilities & IFCAP_VLAN_HWTSO) ||
|
|
!(ifp->if_capenable & IFCAP_VLAN_HWTAGGING))
|
|
ifp->if_capenable &= ~IFCAP_VLAN_HWTSO;
|
|
|
|
mtx_unlock(&sc->driver_mtx);
|
|
VLAN_CAPABILITIES(ifp);
|
|
|
|
break;
|
|
|
|
case SIOCGIFMEDIA:
|
|
mtx_lock(&sc->driver_mtx);
|
|
mxge_media_probe(sc);
|
|
mtx_unlock(&sc->driver_mtx);
|
|
err = ifmedia_ioctl(ifp, (struct ifreq *)data,
|
|
&sc->media, command);
|
|
break;
|
|
|
|
default:
|
|
err = ENOTTY;
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static void
|
|
mxge_fetch_tunables(mxge_softc_t *sc)
|
|
{
|
|
|
|
TUNABLE_INT_FETCH("hw.mxge.max_slices", &mxge_max_slices);
|
|
TUNABLE_INT_FETCH("hw.mxge.flow_control_enabled",
|
|
&mxge_flow_control);
|
|
TUNABLE_INT_FETCH("hw.mxge.intr_coal_delay",
|
|
&mxge_intr_coal_delay);
|
|
TUNABLE_INT_FETCH("hw.mxge.nvidia_ecrc_enable",
|
|
&mxge_nvidia_ecrc_enable);
|
|
TUNABLE_INT_FETCH("hw.mxge.force_firmware",
|
|
&mxge_force_firmware);
|
|
TUNABLE_INT_FETCH("hw.mxge.deassert_wait",
|
|
&mxge_deassert_wait);
|
|
TUNABLE_INT_FETCH("hw.mxge.verbose",
|
|
&mxge_verbose);
|
|
TUNABLE_INT_FETCH("hw.mxge.ticks", &mxge_ticks);
|
|
TUNABLE_INT_FETCH("hw.mxge.lro_cnt", &sc->lro_cnt);
|
|
TUNABLE_INT_FETCH("hw.mxge.always_promisc", &mxge_always_promisc);
|
|
TUNABLE_INT_FETCH("hw.mxge.rss_hash_type", &mxge_rss_hash_type);
|
|
TUNABLE_INT_FETCH("hw.mxge.rss_hashtype", &mxge_rss_hash_type);
|
|
TUNABLE_INT_FETCH("hw.mxge.initial_mtu", &mxge_initial_mtu);
|
|
TUNABLE_INT_FETCH("hw.mxge.throttle", &mxge_throttle);
|
|
if (sc->lro_cnt != 0)
|
|
mxge_lro_cnt = sc->lro_cnt;
|
|
|
|
if (bootverbose)
|
|
mxge_verbose = 1;
|
|
if (mxge_intr_coal_delay < 0 || mxge_intr_coal_delay > 10*1000)
|
|
mxge_intr_coal_delay = 30;
|
|
if (mxge_ticks == 0)
|
|
mxge_ticks = hz / 2;
|
|
sc->pause = mxge_flow_control;
|
|
if (mxge_rss_hash_type < MXGEFW_RSS_HASH_TYPE_IPV4
|
|
|| mxge_rss_hash_type > MXGEFW_RSS_HASH_TYPE_MAX) {
|
|
mxge_rss_hash_type = MXGEFW_RSS_HASH_TYPE_SRC_DST_PORT;
|
|
}
|
|
if (mxge_initial_mtu > ETHERMTU_JUMBO ||
|
|
mxge_initial_mtu < ETHER_MIN_LEN)
|
|
mxge_initial_mtu = ETHERMTU_JUMBO;
|
|
|
|
if (mxge_throttle && mxge_throttle > MXGE_MAX_THROTTLE)
|
|
mxge_throttle = MXGE_MAX_THROTTLE;
|
|
if (mxge_throttle && mxge_throttle < MXGE_MIN_THROTTLE)
|
|
mxge_throttle = MXGE_MIN_THROTTLE;
|
|
sc->throttle = mxge_throttle;
|
|
}
|
|
|
|
|
|
static void
|
|
mxge_free_slices(mxge_softc_t *sc)
|
|
{
|
|
struct mxge_slice_state *ss;
|
|
int i;
|
|
|
|
|
|
if (sc->ss == NULL)
|
|
return;
|
|
|
|
for (i = 0; i < sc->num_slices; i++) {
|
|
ss = &sc->ss[i];
|
|
if (ss->fw_stats != NULL) {
|
|
mxge_dma_free(&ss->fw_stats_dma);
|
|
ss->fw_stats = NULL;
|
|
#ifdef IFNET_BUF_RING
|
|
if (ss->tx.br != NULL) {
|
|
drbr_free(ss->tx.br, M_DEVBUF);
|
|
ss->tx.br = NULL;
|
|
}
|
|
#endif
|
|
mtx_destroy(&ss->tx.mtx);
|
|
}
|
|
if (ss->rx_done.entry != NULL) {
|
|
mxge_dma_free(&ss->rx_done.dma);
|
|
ss->rx_done.entry = NULL;
|
|
}
|
|
}
|
|
free(sc->ss, M_DEVBUF);
|
|
sc->ss = NULL;
|
|
}
|
|
|
|
static int
|
|
mxge_alloc_slices(mxge_softc_t *sc)
|
|
{
|
|
mxge_cmd_t cmd;
|
|
struct mxge_slice_state *ss;
|
|
size_t bytes;
|
|
int err, i, max_intr_slots;
|
|
|
|
err = mxge_send_cmd(sc, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Cannot determine rx ring size\n");
|
|
return err;
|
|
}
|
|
sc->rx_ring_size = cmd.data0;
|
|
max_intr_slots = 2 * (sc->rx_ring_size / sizeof (mcp_dma_addr_t));
|
|
|
|
bytes = sizeof (*sc->ss) * sc->num_slices;
|
|
sc->ss = malloc(bytes, M_DEVBUF, M_NOWAIT | M_ZERO);
|
|
if (sc->ss == NULL)
|
|
return (ENOMEM);
|
|
for (i = 0; i < sc->num_slices; i++) {
|
|
ss = &sc->ss[i];
|
|
|
|
ss->sc = sc;
|
|
|
|
/* allocate per-slice rx interrupt queues */
|
|
|
|
bytes = max_intr_slots * sizeof (*ss->rx_done.entry);
|
|
err = mxge_dma_alloc(sc, &ss->rx_done.dma, bytes, 4096);
|
|
if (err != 0)
|
|
goto abort;
|
|
ss->rx_done.entry = ss->rx_done.dma.addr;
|
|
bzero(ss->rx_done.entry, bytes);
|
|
|
|
/*
|
|
* allocate the per-slice firmware stats; stats
|
|
* (including tx) are used used only on the first
|
|
* slice for now
|
|
*/
|
|
#ifndef IFNET_BUF_RING
|
|
if (i > 0)
|
|
continue;
|
|
#endif
|
|
|
|
bytes = sizeof (*ss->fw_stats);
|
|
err = mxge_dma_alloc(sc, &ss->fw_stats_dma,
|
|
sizeof (*ss->fw_stats), 64);
|
|
if (err != 0)
|
|
goto abort;
|
|
ss->fw_stats = (mcp_irq_data_t *)ss->fw_stats_dma.addr;
|
|
snprintf(ss->tx.mtx_name, sizeof(ss->tx.mtx_name),
|
|
"%s:tx(%d)", device_get_nameunit(sc->dev), i);
|
|
mtx_init(&ss->tx.mtx, ss->tx.mtx_name, NULL, MTX_DEF);
|
|
#ifdef IFNET_BUF_RING
|
|
ss->tx.br = buf_ring_alloc(2048, M_DEVBUF, M_WAITOK,
|
|
&ss->tx.mtx);
|
|
#endif
|
|
}
|
|
|
|
return (0);
|
|
|
|
abort:
|
|
mxge_free_slices(sc);
|
|
return (ENOMEM);
|
|
}
|
|
|
|
static void
|
|
mxge_slice_probe(mxge_softc_t *sc)
|
|
{
|
|
mxge_cmd_t cmd;
|
|
char *old_fw;
|
|
int msix_cnt, status, max_intr_slots;
|
|
|
|
sc->num_slices = 1;
|
|
/*
|
|
* don't enable multiple slices if they are not enabled,
|
|
* or if this is not an SMP system
|
|
*/
|
|
|
|
if (mxge_max_slices == 0 || mxge_max_slices == 1 || mp_ncpus < 2)
|
|
return;
|
|
|
|
/* see how many MSI-X interrupts are available */
|
|
msix_cnt = pci_msix_count(sc->dev);
|
|
if (msix_cnt < 2)
|
|
return;
|
|
|
|
/* now load the slice aware firmware see what it supports */
|
|
old_fw = sc->fw_name;
|
|
if (old_fw == mxge_fw_aligned)
|
|
sc->fw_name = mxge_fw_rss_aligned;
|
|
else
|
|
sc->fw_name = mxge_fw_rss_unaligned;
|
|
status = mxge_load_firmware(sc, 0);
|
|
if (status != 0) {
|
|
device_printf(sc->dev, "Falling back to a single slice\n");
|
|
return;
|
|
}
|
|
|
|
/* try to send a reset command to the card to see if it
|
|
is alive */
|
|
memset(&cmd, 0, sizeof (cmd));
|
|
status = mxge_send_cmd(sc, MXGEFW_CMD_RESET, &cmd);
|
|
if (status != 0) {
|
|
device_printf(sc->dev, "failed reset\n");
|
|
goto abort_with_fw;
|
|
}
|
|
|
|
/* get rx ring size */
|
|
status = mxge_send_cmd(sc, MXGEFW_CMD_GET_RX_RING_SIZE, &cmd);
|
|
if (status != 0) {
|
|
device_printf(sc->dev, "Cannot determine rx ring size\n");
|
|
goto abort_with_fw;
|
|
}
|
|
max_intr_slots = 2 * (cmd.data0 / sizeof (mcp_dma_addr_t));
|
|
|
|
/* tell it the size of the interrupt queues */
|
|
cmd.data0 = max_intr_slots * sizeof (struct mcp_slot);
|
|
status = mxge_send_cmd(sc, MXGEFW_CMD_SET_INTRQ_SIZE, &cmd);
|
|
if (status != 0) {
|
|
device_printf(sc->dev, "failed MXGEFW_CMD_SET_INTRQ_SIZE\n");
|
|
goto abort_with_fw;
|
|
}
|
|
|
|
/* ask the maximum number of slices it supports */
|
|
status = mxge_send_cmd(sc, MXGEFW_CMD_GET_MAX_RSS_QUEUES, &cmd);
|
|
if (status != 0) {
|
|
device_printf(sc->dev,
|
|
"failed MXGEFW_CMD_GET_MAX_RSS_QUEUES\n");
|
|
goto abort_with_fw;
|
|
}
|
|
sc->num_slices = cmd.data0;
|
|
if (sc->num_slices > msix_cnt)
|
|
sc->num_slices = msix_cnt;
|
|
|
|
if (mxge_max_slices == -1) {
|
|
/* cap to number of CPUs in system */
|
|
if (sc->num_slices > mp_ncpus)
|
|
sc->num_slices = mp_ncpus;
|
|
} else {
|
|
if (sc->num_slices > mxge_max_slices)
|
|
sc->num_slices = mxge_max_slices;
|
|
}
|
|
/* make sure it is a power of two */
|
|
while (sc->num_slices & (sc->num_slices - 1))
|
|
sc->num_slices--;
|
|
|
|
if (mxge_verbose)
|
|
device_printf(sc->dev, "using %d slices\n",
|
|
sc->num_slices);
|
|
|
|
return;
|
|
|
|
abort_with_fw:
|
|
sc->fw_name = old_fw;
|
|
(void) mxge_load_firmware(sc, 0);
|
|
}
|
|
|
|
static int
|
|
mxge_add_msix_irqs(mxge_softc_t *sc)
|
|
{
|
|
size_t bytes;
|
|
int count, err, i, rid;
|
|
|
|
rid = PCIR_BAR(2);
|
|
sc->msix_table_res = bus_alloc_resource_any(sc->dev, SYS_RES_MEMORY,
|
|
&rid, RF_ACTIVE);
|
|
|
|
if (sc->msix_table_res == NULL) {
|
|
device_printf(sc->dev, "couldn't alloc MSIX table res\n");
|
|
return ENXIO;
|
|
}
|
|
|
|
count = sc->num_slices;
|
|
err = pci_alloc_msix(sc->dev, &count);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "pci_alloc_msix: failed, wanted %d"
|
|
"err = %d \n", sc->num_slices, err);
|
|
goto abort_with_msix_table;
|
|
}
|
|
if (count < sc->num_slices) {
|
|
device_printf(sc->dev, "pci_alloc_msix: need %d, got %d\n",
|
|
count, sc->num_slices);
|
|
device_printf(sc->dev,
|
|
"Try setting hw.mxge.max_slices to %d\n",
|
|
count);
|
|
err = ENOSPC;
|
|
goto abort_with_msix;
|
|
}
|
|
bytes = sizeof (*sc->msix_irq_res) * sc->num_slices;
|
|
sc->msix_irq_res = malloc(bytes, M_DEVBUF, M_NOWAIT|M_ZERO);
|
|
if (sc->msix_irq_res == NULL) {
|
|
err = ENOMEM;
|
|
goto abort_with_msix;
|
|
}
|
|
|
|
for (i = 0; i < sc->num_slices; i++) {
|
|
rid = i + 1;
|
|
sc->msix_irq_res[i] = bus_alloc_resource_any(sc->dev,
|
|
SYS_RES_IRQ,
|
|
&rid, RF_ACTIVE);
|
|
if (sc->msix_irq_res[i] == NULL) {
|
|
device_printf(sc->dev, "couldn't allocate IRQ res"
|
|
" for message %d\n", i);
|
|
err = ENXIO;
|
|
goto abort_with_res;
|
|
}
|
|
}
|
|
|
|
bytes = sizeof (*sc->msix_ih) * sc->num_slices;
|
|
sc->msix_ih = malloc(bytes, M_DEVBUF, M_NOWAIT|M_ZERO);
|
|
|
|
for (i = 0; i < sc->num_slices; i++) {
|
|
err = bus_setup_intr(sc->dev, sc->msix_irq_res[i],
|
|
INTR_TYPE_NET | INTR_MPSAFE,
|
|
#if __FreeBSD_version > 700030
|
|
NULL,
|
|
#endif
|
|
mxge_intr, &sc->ss[i], &sc->msix_ih[i]);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "couldn't setup intr for "
|
|
"message %d\n", i);
|
|
goto abort_with_intr;
|
|
}
|
|
bus_describe_intr(sc->dev, sc->msix_irq_res[i],
|
|
sc->msix_ih[i], "s%d", i);
|
|
}
|
|
|
|
if (mxge_verbose) {
|
|
device_printf(sc->dev, "using %d msix IRQs:",
|
|
sc->num_slices);
|
|
for (i = 0; i < sc->num_slices; i++)
|
|
printf(" %ld", rman_get_start(sc->msix_irq_res[i]));
|
|
printf("\n");
|
|
}
|
|
return (0);
|
|
|
|
abort_with_intr:
|
|
for (i = 0; i < sc->num_slices; i++) {
|
|
if (sc->msix_ih[i] != NULL) {
|
|
bus_teardown_intr(sc->dev, sc->msix_irq_res[i],
|
|
sc->msix_ih[i]);
|
|
sc->msix_ih[i] = NULL;
|
|
}
|
|
}
|
|
free(sc->msix_ih, M_DEVBUF);
|
|
|
|
|
|
abort_with_res:
|
|
for (i = 0; i < sc->num_slices; i++) {
|
|
rid = i + 1;
|
|
if (sc->msix_irq_res[i] != NULL)
|
|
bus_release_resource(sc->dev, SYS_RES_IRQ, rid,
|
|
sc->msix_irq_res[i]);
|
|
sc->msix_irq_res[i] = NULL;
|
|
}
|
|
free(sc->msix_irq_res, M_DEVBUF);
|
|
|
|
|
|
abort_with_msix:
|
|
pci_release_msi(sc->dev);
|
|
|
|
abort_with_msix_table:
|
|
bus_release_resource(sc->dev, SYS_RES_MEMORY, PCIR_BAR(2),
|
|
sc->msix_table_res);
|
|
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
mxge_add_single_irq(mxge_softc_t *sc)
|
|
{
|
|
int count, err, rid;
|
|
|
|
count = pci_msi_count(sc->dev);
|
|
if (count == 1 && pci_alloc_msi(sc->dev, &count) == 0) {
|
|
rid = 1;
|
|
} else {
|
|
rid = 0;
|
|
sc->legacy_irq = 1;
|
|
}
|
|
sc->irq_res = bus_alloc_resource(sc->dev, SYS_RES_IRQ, &rid, 0, ~0,
|
|
1, RF_SHAREABLE | RF_ACTIVE);
|
|
if (sc->irq_res == NULL) {
|
|
device_printf(sc->dev, "could not alloc interrupt\n");
|
|
return ENXIO;
|
|
}
|
|
if (mxge_verbose)
|
|
device_printf(sc->dev, "using %s irq %ld\n",
|
|
sc->legacy_irq ? "INTx" : "MSI",
|
|
rman_get_start(sc->irq_res));
|
|
err = bus_setup_intr(sc->dev, sc->irq_res,
|
|
INTR_TYPE_NET | INTR_MPSAFE,
|
|
#if __FreeBSD_version > 700030
|
|
NULL,
|
|
#endif
|
|
mxge_intr, &sc->ss[0], &sc->ih);
|
|
if (err != 0) {
|
|
bus_release_resource(sc->dev, SYS_RES_IRQ,
|
|
sc->legacy_irq ? 0 : 1, sc->irq_res);
|
|
if (!sc->legacy_irq)
|
|
pci_release_msi(sc->dev);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
static void
|
|
mxge_rem_msix_irqs(mxge_softc_t *sc)
|
|
{
|
|
int i, rid;
|
|
|
|
for (i = 0; i < sc->num_slices; i++) {
|
|
if (sc->msix_ih[i] != NULL) {
|
|
bus_teardown_intr(sc->dev, sc->msix_irq_res[i],
|
|
sc->msix_ih[i]);
|
|
sc->msix_ih[i] = NULL;
|
|
}
|
|
}
|
|
free(sc->msix_ih, M_DEVBUF);
|
|
|
|
for (i = 0; i < sc->num_slices; i++) {
|
|
rid = i + 1;
|
|
if (sc->msix_irq_res[i] != NULL)
|
|
bus_release_resource(sc->dev, SYS_RES_IRQ, rid,
|
|
sc->msix_irq_res[i]);
|
|
sc->msix_irq_res[i] = NULL;
|
|
}
|
|
free(sc->msix_irq_res, M_DEVBUF);
|
|
|
|
bus_release_resource(sc->dev, SYS_RES_MEMORY, PCIR_BAR(2),
|
|
sc->msix_table_res);
|
|
|
|
pci_release_msi(sc->dev);
|
|
return;
|
|
}
|
|
|
|
static void
|
|
mxge_rem_single_irq(mxge_softc_t *sc)
|
|
{
|
|
bus_teardown_intr(sc->dev, sc->irq_res, sc->ih);
|
|
bus_release_resource(sc->dev, SYS_RES_IRQ,
|
|
sc->legacy_irq ? 0 : 1, sc->irq_res);
|
|
if (!sc->legacy_irq)
|
|
pci_release_msi(sc->dev);
|
|
}
|
|
|
|
static void
|
|
mxge_rem_irq(mxge_softc_t *sc)
|
|
{
|
|
if (sc->num_slices > 1)
|
|
mxge_rem_msix_irqs(sc);
|
|
else
|
|
mxge_rem_single_irq(sc);
|
|
}
|
|
|
|
static int
|
|
mxge_add_irq(mxge_softc_t *sc)
|
|
{
|
|
int err;
|
|
|
|
if (sc->num_slices > 1)
|
|
err = mxge_add_msix_irqs(sc);
|
|
else
|
|
err = mxge_add_single_irq(sc);
|
|
|
|
if (0 && err == 0 && sc->num_slices > 1) {
|
|
mxge_rem_msix_irqs(sc);
|
|
err = mxge_add_msix_irqs(sc);
|
|
}
|
|
return err;
|
|
}
|
|
|
|
|
|
static int
|
|
mxge_attach(device_t dev)
|
|
{
|
|
mxge_softc_t *sc = device_get_softc(dev);
|
|
struct ifnet *ifp;
|
|
int err, rid;
|
|
|
|
sc->dev = dev;
|
|
mxge_fetch_tunables(sc);
|
|
|
|
TASK_INIT(&sc->watchdog_task, 1, mxge_watchdog_task, sc);
|
|
sc->tq = taskqueue_create("mxge_taskq", M_WAITOK,
|
|
taskqueue_thread_enqueue, &sc->tq);
|
|
if (sc->tq == NULL) {
|
|
err = ENOMEM;
|
|
goto abort_with_nothing;
|
|
}
|
|
|
|
err = bus_dma_tag_create(bus_get_dma_tag(dev), /* parent */
|
|
1, /* alignment */
|
|
0, /* boundary */
|
|
BUS_SPACE_MAXADDR, /* low */
|
|
BUS_SPACE_MAXADDR, /* high */
|
|
NULL, NULL, /* filter */
|
|
65536 + 256, /* maxsize */
|
|
MXGE_MAX_SEND_DESC, /* num segs */
|
|
65536, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, NULL, /* lock */
|
|
&sc->parent_dmat); /* tag */
|
|
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "Err %d allocating parent dmat\n",
|
|
err);
|
|
goto abort_with_tq;
|
|
}
|
|
|
|
ifp = sc->ifp = if_alloc(IFT_ETHER);
|
|
if (ifp == NULL) {
|
|
device_printf(dev, "can not if_alloc()\n");
|
|
err = ENOSPC;
|
|
goto abort_with_parent_dmat;
|
|
}
|
|
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
|
|
|
|
snprintf(sc->cmd_mtx_name, sizeof(sc->cmd_mtx_name), "%s:cmd",
|
|
device_get_nameunit(dev));
|
|
mtx_init(&sc->cmd_mtx, sc->cmd_mtx_name, NULL, MTX_DEF);
|
|
snprintf(sc->driver_mtx_name, sizeof(sc->driver_mtx_name),
|
|
"%s:drv", device_get_nameunit(dev));
|
|
mtx_init(&sc->driver_mtx, sc->driver_mtx_name,
|
|
MTX_NETWORK_LOCK, MTX_DEF);
|
|
|
|
callout_init_mtx(&sc->co_hdl, &sc->driver_mtx, 0);
|
|
|
|
mxge_setup_cfg_space(sc);
|
|
|
|
/* Map the board into the kernel */
|
|
rid = PCIR_BARS;
|
|
sc->mem_res = bus_alloc_resource(dev, SYS_RES_MEMORY, &rid, 0,
|
|
~0, 1, RF_ACTIVE);
|
|
if (sc->mem_res == NULL) {
|
|
device_printf(dev, "could not map memory\n");
|
|
err = ENXIO;
|
|
goto abort_with_lock;
|
|
}
|
|
sc->sram = rman_get_virtual(sc->mem_res);
|
|
sc->sram_size = 2*1024*1024 - (2*(48*1024)+(32*1024)) - 0x100;
|
|
if (sc->sram_size > rman_get_size(sc->mem_res)) {
|
|
device_printf(dev, "impossible memory region size %ld\n",
|
|
rman_get_size(sc->mem_res));
|
|
err = ENXIO;
|
|
goto abort_with_mem_res;
|
|
}
|
|
|
|
/* make NULL terminated copy of the EEPROM strings section of
|
|
lanai SRAM */
|
|
bzero(sc->eeprom_strings, MXGE_EEPROM_STRINGS_SIZE);
|
|
bus_space_read_region_1(rman_get_bustag(sc->mem_res),
|
|
rman_get_bushandle(sc->mem_res),
|
|
sc->sram_size - MXGE_EEPROM_STRINGS_SIZE,
|
|
sc->eeprom_strings,
|
|
MXGE_EEPROM_STRINGS_SIZE - 2);
|
|
err = mxge_parse_strings(sc);
|
|
if (err != 0)
|
|
goto abort_with_mem_res;
|
|
|
|
/* Enable write combining for efficient use of PCIe bus */
|
|
mxge_enable_wc(sc);
|
|
|
|
/* Allocate the out of band dma memory */
|
|
err = mxge_dma_alloc(sc, &sc->cmd_dma,
|
|
sizeof (mxge_cmd_t), 64);
|
|
if (err != 0)
|
|
goto abort_with_mem_res;
|
|
sc->cmd = (mcp_cmd_response_t *) sc->cmd_dma.addr;
|
|
err = mxge_dma_alloc(sc, &sc->zeropad_dma, 64, 64);
|
|
if (err != 0)
|
|
goto abort_with_cmd_dma;
|
|
|
|
err = mxge_dma_alloc(sc, &sc->dmabench_dma, 4096, 4096);
|
|
if (err != 0)
|
|
goto abort_with_zeropad_dma;
|
|
|
|
/* select & load the firmware */
|
|
err = mxge_select_firmware(sc);
|
|
if (err != 0)
|
|
goto abort_with_dmabench;
|
|
sc->intr_coal_delay = mxge_intr_coal_delay;
|
|
|
|
mxge_slice_probe(sc);
|
|
err = mxge_alloc_slices(sc);
|
|
if (err != 0)
|
|
goto abort_with_dmabench;
|
|
|
|
err = mxge_reset(sc, 0);
|
|
if (err != 0)
|
|
goto abort_with_slices;
|
|
|
|
err = mxge_alloc_rings(sc);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "failed to allocate rings\n");
|
|
goto abort_with_slices;
|
|
}
|
|
|
|
err = mxge_add_irq(sc);
|
|
if (err != 0) {
|
|
device_printf(sc->dev, "failed to add irq\n");
|
|
goto abort_with_rings;
|
|
}
|
|
|
|
ifp->if_baudrate = IF_Gbps(10UL);
|
|
ifp->if_capabilities = IFCAP_RXCSUM | IFCAP_TXCSUM | IFCAP_TSO4 |
|
|
IFCAP_VLAN_MTU | IFCAP_LINKSTATE;
|
|
#ifdef INET
|
|
ifp->if_capabilities |= IFCAP_LRO;
|
|
#endif
|
|
|
|
#ifdef MXGE_NEW_VLAN_API
|
|
ifp->if_capabilities |= IFCAP_VLAN_HWTAGGING | IFCAP_VLAN_HWCSUM;
|
|
|
|
/* Only FW 1.4.32 and newer can do TSO over vlans */
|
|
if (sc->fw_ver_major == 1 && sc->fw_ver_minor == 4 &&
|
|
sc->fw_ver_tiny >= 32)
|
|
ifp->if_capabilities |= IFCAP_VLAN_HWTSO;
|
|
#endif
|
|
|
|
sc->max_mtu = mxge_max_mtu(sc);
|
|
if (sc->max_mtu >= 9000)
|
|
ifp->if_capabilities |= IFCAP_JUMBO_MTU;
|
|
else
|
|
device_printf(dev, "MTU limited to %d. Install "
|
|
"latest firmware for 9000 byte jumbo support\n",
|
|
sc->max_mtu - ETHER_HDR_LEN);
|
|
ifp->if_hwassist = CSUM_TCP | CSUM_UDP | CSUM_TSO;
|
|
ifp->if_capenable = ifp->if_capabilities;
|
|
if (sc->lro_cnt == 0)
|
|
ifp->if_capenable &= ~IFCAP_LRO;
|
|
sc->csum_flag = 1;
|
|
ifp->if_init = mxge_init;
|
|
ifp->if_softc = sc;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = mxge_ioctl;
|
|
ifp->if_start = mxge_start;
|
|
/* Initialise the ifmedia structure */
|
|
ifmedia_init(&sc->media, 0, mxge_media_change,
|
|
mxge_media_status);
|
|
mxge_media_init(sc);
|
|
mxge_media_probe(sc);
|
|
sc->dying = 0;
|
|
ether_ifattach(ifp, sc->mac_addr);
|
|
/* ether_ifattach sets mtu to ETHERMTU */
|
|
if (mxge_initial_mtu != ETHERMTU)
|
|
mxge_change_mtu(sc, mxge_initial_mtu);
|
|
|
|
mxge_add_sysctls(sc);
|
|
#ifdef IFNET_BUF_RING
|
|
ifp->if_transmit = mxge_transmit;
|
|
ifp->if_qflush = mxge_qflush;
|
|
#endif
|
|
taskqueue_start_threads(&sc->tq, 1, PI_NET, "%s taskq",
|
|
device_get_nameunit(sc->dev));
|
|
callout_reset(&sc->co_hdl, mxge_ticks, mxge_tick, sc);
|
|
return 0;
|
|
|
|
abort_with_rings:
|
|
mxge_free_rings(sc);
|
|
abort_with_slices:
|
|
mxge_free_slices(sc);
|
|
abort_with_dmabench:
|
|
mxge_dma_free(&sc->dmabench_dma);
|
|
abort_with_zeropad_dma:
|
|
mxge_dma_free(&sc->zeropad_dma);
|
|
abort_with_cmd_dma:
|
|
mxge_dma_free(&sc->cmd_dma);
|
|
abort_with_mem_res:
|
|
bus_release_resource(dev, SYS_RES_MEMORY, PCIR_BARS, sc->mem_res);
|
|
abort_with_lock:
|
|
pci_disable_busmaster(dev);
|
|
mtx_destroy(&sc->cmd_mtx);
|
|
mtx_destroy(&sc->driver_mtx);
|
|
if_free(ifp);
|
|
abort_with_parent_dmat:
|
|
bus_dma_tag_destroy(sc->parent_dmat);
|
|
abort_with_tq:
|
|
if (sc->tq != NULL) {
|
|
taskqueue_drain(sc->tq, &sc->watchdog_task);
|
|
taskqueue_free(sc->tq);
|
|
sc->tq = NULL;
|
|
}
|
|
abort_with_nothing:
|
|
return err;
|
|
}
|
|
|
|
static int
|
|
mxge_detach(device_t dev)
|
|
{
|
|
mxge_softc_t *sc = device_get_softc(dev);
|
|
|
|
if (mxge_vlans_active(sc)) {
|
|
device_printf(sc->dev,
|
|
"Detach vlans before removing module\n");
|
|
return EBUSY;
|
|
}
|
|
mtx_lock(&sc->driver_mtx);
|
|
sc->dying = 1;
|
|
if (sc->ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
mxge_close(sc, 0);
|
|
mtx_unlock(&sc->driver_mtx);
|
|
ether_ifdetach(sc->ifp);
|
|
if (sc->tq != NULL) {
|
|
taskqueue_drain(sc->tq, &sc->watchdog_task);
|
|
taskqueue_free(sc->tq);
|
|
sc->tq = NULL;
|
|
}
|
|
callout_drain(&sc->co_hdl);
|
|
ifmedia_removeall(&sc->media);
|
|
mxge_dummy_rdma(sc, 0);
|
|
mxge_rem_sysctls(sc);
|
|
mxge_rem_irq(sc);
|
|
mxge_free_rings(sc);
|
|
mxge_free_slices(sc);
|
|
mxge_dma_free(&sc->dmabench_dma);
|
|
mxge_dma_free(&sc->zeropad_dma);
|
|
mxge_dma_free(&sc->cmd_dma);
|
|
bus_release_resource(dev, SYS_RES_MEMORY, PCIR_BARS, sc->mem_res);
|
|
pci_disable_busmaster(dev);
|
|
mtx_destroy(&sc->cmd_mtx);
|
|
mtx_destroy(&sc->driver_mtx);
|
|
if_free(sc->ifp);
|
|
bus_dma_tag_destroy(sc->parent_dmat);
|
|
return 0;
|
|
}
|
|
|
|
static int
|
|
mxge_shutdown(device_t dev)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
This file uses Myri10GE driver indentation.
|
|
|
|
Local Variables:
|
|
c-file-style:"linux"
|
|
tab-width:8
|
|
End:
|
|
*/
|