freebsd-skq/sys/arm/sa11x0/sa11x0_reg.h
cognet a1e9e6f052 Use pmap_devmap_bootstrap(), instead of mapping the SACOM1 registers
with pmap_map_entry.
More use of macros instead of hardcoding the addr.

Submitted by:	kevlo
2006-05-23 12:14:14 +00:00

84 lines
3.5 KiB
C

/* $NetBSD: sa11x0_reg.h,v 1.4 2002/07/19 18:26:56 ichiro Exp $ */
/*-
* Copyright (c) 2001 The NetBSD Foundation, Inc. All rights reserved.
*
* This code is derived from software contributed to The NetBSD Foundation
* by IWAMOTO Toshihiro.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. All advertising materials mentioning features or use of this software
* must display the following acknowledgement:
* This product includes software developed by the NetBSD
* Foundation, Inc. and its contributors.
* 4. Neither the name of The NetBSD Foundation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE NETBSD FOUNDATION, INC. AND CONTRIBUTORS
* ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED
* TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
* PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS
* BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*
* $FreeBSD$
*
*/
#ifndef _ARM_SA11X0_REG_H_
#define _ARM_SA11X0_REG_H_
/* Physical register base addresses */
#define SAOST_BASE 0x90000000 /* OS Timer */
#define SARTC_BASE 0x90010000 /* Real-Time Clock */
#define SAPMR_BASE 0x90020000 /* Power Manager */
#define SARCR_BASE 0x90030000 /* Reset Controller */
#define SAGPIO_BASE 0x90040000 /* GPIO */
#define SAIPIC_BASE 0x90050000 /* Interrupt Controller */
#define SAIPIC_SIZE 0x24
#define SAPPC_BASE 0x90060000 /* Peripheral Pin Controller */
#define SAUDC_BASE 0x80000000 /* USB Device Controller*/
#define SACOM1_BASE 0x80010000 /* GPCLK/UART 1 */
#define SACOM1_SIZE 0x24
#define SACOM3_HW_BASE 0x80050000 /* UART 3 */
#define SAMCP_BASE 0x80060000 /* MCP Controller */
#define SASSP_BASE 0x80070000 /* Synchronous serial port */
#define SADMAC_BASE 0xB0000000 /* DMA Controller */
#define SALCD_BASE 0xB0100000 /* LCD */
/* Register base virtual addresses mapped by initarm() */
#define SACOM1_VBASE 0xd000d000
/* Interrupt controller registers */
#define SAIPIC_NPORTS 9
#define SAIPIC_IP 0x00 /* IRQ pending register */
#define SAIPIC_MR 0x04 /* Mask register */
#define SAIPIC_LR 0x08 /* Level register */
#define SAIPIC_FP 0x10 /* FIQ pending register */
#define SAIPIC_PR 0x20 /* Pending register */
#define SAIPIC_CR 0x0C /* Control register */
/* width of interrupt controller */
#define ICU_LEN 32
/* Reset controller registers */
#define SARCR_RSRR 0x0 /* Software reset register */
#define SARCR_RCSR 0x4 /* Reset status register */
#define SARCR_TUCR 0x8 /* Test Unit control reg */
#endif /* _ARM_SA11X0_REG_H_ */