freebsd-skq/usr.sbin/pkg_install/version/pkg_version.1
Florent Thoumie 0b99032d09 - Add long options to pkg_install.
- Remove check for '-?' as it's not listed in authorized options.
- Bump PKG_INSTALL_VERSION to 20080530.
2008-05-30 14:26:09 +00:00

257 lines
7.5 KiB
Groff

.\"
.\" Copyright 1998 Bruce A. Mah
.\"
.\" All rights reserved.
.\"
.\" Redistribution and use in source and binary forms, with or without
.\" modification, are permitted provided that the following conditions
.\" are met:
.\" 1. Redistributions of source code must retain the above copyright
.\" notice, this list of conditions and the following disclaimer.
.\" 2. Redistributions in binary form must reproduce the above copyright
.\" notice, this list of conditions and the following disclaimer in the
.\" documentation and/or other materials provided with the distribution.
.\"
.\" THIS SOFTWARE IS PROVIDED BY THE DEVELOPERS ``AS IS'' AND ANY EXPRESS OR
.\" IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
.\" OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
.\" IN NO EVENT SHALL THE DEVELOPERS BE LIABLE FOR ANY DIRECT, INDIRECT,
.\" INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
.\" NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
.\" DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
.\" THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
.\" (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
.\" THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
.\"
.\" $FreeBSD$
.\"
.Dd May 30, 2008
.Dt PKG_VERSION 1
.Os
.Sh NAME
.Nm pkg_version
.Nd summarize installed versions of packages
.Sh SYNOPSIS
.Nm
.Op Fl hIoqv
.Op Fl l Ar limchar
.Op Fl L Ar limchar
.Oo
.Op Fl X
.Fl s Ar string
.Oc
.Op Fl O Ar origin
.Op Ar index
.Nm
.Fl t Ar version1 version2
.Nm
.Fl T Ar pkgname pattern
.Sh DESCRIPTION
The
.Nm
command is used to produce a report of non-base software packages
installed using the
.Xr pkg_add 1
command.
.Pp
Each package's version number is checked against one of two sources to
see if that package may require updating.
If the package contains
information about its origin in the
.Fx
ports tree, and a version number can be determined from the port's
.Pa Makefile ,
then the version number from the
.Pa Makefile
will be used to determine whether the installed package is up-to-date
or requires updating.
.Pp
If no origin for a package can be found, or if the port's
.Pa Makefile
cannot be located,
.Nm
will search for the package in the ports collection index file
(typically
.Pa /usr/ports/INDEX-8 ) .
Any matching version number(s) there will be used to determine whether
the installed package is up-to-date or requires updating.
.Pp
Generally, using the version number from a port's
.Pa Makefile
will provide a more accurate result, since, unlike the index file, it
provides an unambiguous current version number, even when multiple
versions of a port exist in the ports collection.
Moreover, the ports collection index file is only updated at
intervals, meaning that it may not completely reflect the version
numbers of the software contained in the ports collection.
.Pp
Each package name is printed, along with a one-character status flag:
.Bl -tag -width indent
.It Li =
The installed version of the package is current.
.It Li \&<
The installed version of the package is older than the current version.
.It Li \&>
The installed version of the package is newer than the current version.
This situation can arise with an out-of-date index file, or when
testing new ports.
.It Li \&?
The installed package does not appear in the index.
This could be due to an out of date index or a package taken from a PR
that has not yet been committed.
.It Li *
There are multiple versions of a particular software package
listed in the index file.
Examples from the
.Fx
ports collection are the Tcl toolkit or the
.Tn EMACS
editor.
.It Li \&!
The installed package exists in the index but for some reason,
.Nm
was unable to compare the version number of the installed package
with the corresponding entry in the index.
.El
.Sh OPTIONS
The
.Nm
utility supports several command-line arguments:
.Bl -tag -width indent
.It Fl h , -help
Print help message.
.It Fl I , -index-only
Use only the index file for determining if a package is out of date.
This is much faster than using the version number from a port's
Makefile, at the expense of potentially giving an incorrect result if
the index file is out of date.
.It Fl l , -status Ar limchar
Limit the output to those packages whose status flag matches the
character(s) in
.Ar limchar .
More than one character can be specified in
.Ar limchar .
Note that because some of the status flag characters are also special
to the shell, it is best to quote
.Ar limchar
with single quotes.
.It Fl L , -no-status Ar limchar
Limit the output to those packages whose status flag does not match
.Ar limchar .
You may specify more than one character to match in
.Ar limchar .
Note that because some of the status flag characters are also special
to the shell, it is best to quote
.Ar limchar
with single quotes.
.It Fl o , -show-origin
Show the origin recorded on package generation instead of the package
name.
.It Fl O , -origin Ar origin
Only list packages whose registered origin is
.Ar origin .
.It Fl q , -quiet
Enable quiet output.
Quiet output precludes printing the
.Ar limchar
when used with
.Fl l
or
.Fl L .
This is useful when used as the input to
.Xr portupgrade 8 .
.It Fl s , -match Ar string
Limit the output to those packages whose names match a given
.Ar string .
.It Fl X , -extended
Interpret
.Ar string
as a extended regular expression.
.It Fl t
Test a pair of version number strings and exit.
The output consists of one of the single characters
.Li =
(equal),
.Li \&<
(right-hand number greater), or
.Li \&>
(left-hand number greater) on standard output.
This flag is mostly useful for scripts or for testing.
.It Fl T
Test whether
.Ar pkgname
is matched by
.Ar pattern
and set the exit code accordingly.
.Fl T
can also be used in `filter mode':
When one of the arguments is `-', standard input is used, and lines
with matching package names/patterns are echoed to standard output.
.It Fl v
Enable verbose output.
Verbose output includes some English-text
interpretations of the version number comparisons, as well as the
version numbers compared for each package.
Non-verbose output is
probably easier for programs or scripts to parse.
.It Ar index
Specify the index to be used as a basis of comparison.
This index can
be specified as a filename (in the local file system) or a URL.
Any
URL understandable by
.Xr fetch 1
can be used here.
If no
.Ar index
file is specified on the command line,
.Pa /usr/ports/INDEX-8
is used.
.El
.Sh FILES
.Bl -tag -width /usr/ports/INDEX-8 -compact
.It Pa /usr/ports/INDEX-8
Default index file.
.El
.Sh EXAMPLES
The following is a typical invocation of the
.Nm
command, which checks the installed packages against the local ports
index file:
.Pp
.Dl % pkg_version -v
.Pp
The command below generates a report against
the version numbers in the on-line ports collection:
.Pp
.Dl % pkg_version http://www.FreeBSD.org/ports/INDEX-8
.Pp
The following command compares two package version strings:
.Pp
.Dl % pkg_version -t 1.5 1.5.1
.Sh COMPATIBILITY
The
.Fl c
option has been deprecated and is no longer supported.
.Sh SEE ALSO
.Xr fetch 1 ,
.Xr pkg_add 1 ,
.Xr pkg_create 1 ,
.Xr pkg_delete 1 ,
.Xr pkg_info 1 ,
.Xr portupgrade 8
.Sh AUTHORS
The
.Nm
utility was written by
.An Jeremy D. Lea Aq reg@FreeBSD.org ,
partially based on a Perl script written by
.An Bruce A. Mah Aq bmah@FreeBSD.org .
.Sh CONTRIBUTORS
.An Nik Clayton Aq nik@FreeBSD.org ,
.An Dominic Mitchell Aq dom@palmerharvey.co.uk ,
.An Mark Ovens Aq marko@FreeBSD.org ,
.An Doug Barton Aq DougB@gorean.org ,
.An Akinori MUSHA Aq knu@FreeBSD.org ,
.An Oliver Eikemeier Aq eik@FreeBSD.org