d166ef5286
and remove from its dependency on LRO, my tests have shown that its always beneficial, even when doing bridging. Second, fix up a few problems in the statistics code, the adapter dependencies had gotten lost so some code that should only run on 82599 was always running, this resulted in bogus flow control numbers on 82598.
4928 lines
137 KiB
C
4928 lines
137 KiB
C
/******************************************************************************
|
|
|
|
Copyright (c) 2001-2009, Intel Corporation
|
|
All rights reserved.
|
|
|
|
Redistribution and use in source and binary forms, with or without
|
|
modification, are permitted provided that the following conditions are met:
|
|
|
|
1. Redistributions of source code must retain the above copyright notice,
|
|
this list of conditions and the following disclaimer.
|
|
|
|
2. Redistributions in binary form must reproduce the above copyright
|
|
notice, this list of conditions and the following disclaimer in the
|
|
documentation and/or other materials provided with the distribution.
|
|
|
|
3. Neither the name of the Intel Corporation nor the names of its
|
|
contributors may be used to endorse or promote products derived from
|
|
this software without specific prior written permission.
|
|
|
|
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
|
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
|
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
|
|
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
|
|
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
|
|
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
|
|
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
|
|
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
|
|
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
|
|
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
|
|
POSSIBILITY OF SUCH DAMAGE.
|
|
|
|
******************************************************************************/
|
|
/*$FreeBSD$*/
|
|
|
|
#ifdef HAVE_KERNEL_OPTION_HEADERS
|
|
#include "opt_device_polling.h"
|
|
#endif
|
|
|
|
#include "ixgbe.h"
|
|
|
|
/*********************************************************************
|
|
* Set this to one to display debug statistics
|
|
*********************************************************************/
|
|
int ixgbe_display_debug_stats = 0;
|
|
|
|
/*********************************************************************
|
|
* Driver version
|
|
*********************************************************************/
|
|
char ixgbe_driver_version[] = "1.8.9";
|
|
|
|
/*********************************************************************
|
|
* PCI Device ID Table
|
|
*
|
|
* Used by probe to select devices to load on
|
|
* Last field stores an index into ixgbe_strings
|
|
* Last entry must be all 0s
|
|
*
|
|
* { Vendor ID, Device ID, SubVendor ID, SubDevice ID, String Index }
|
|
*********************************************************************/
|
|
|
|
static ixgbe_vendor_info_t ixgbe_vendor_info_array[] =
|
|
{
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598AF_DUAL_PORT, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598AF_SINGLE_PORT, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598EB_CX4, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598AT, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598_DA_DUAL_PORT, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598_CX4_DUAL_PORT, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598EB_XF_LR, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598AT, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598_SR_DUAL_PORT_EM, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82598EB_SFP_LOM, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_KX4, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_SFP, 0, 0, 0},
|
|
{IXGBE_INTEL_VENDOR_ID, IXGBE_DEV_ID_82599_XAUI_LOM, 0, 0, 0},
|
|
/* required last entry */
|
|
{0, 0, 0, 0, 0}
|
|
};
|
|
|
|
/*********************************************************************
|
|
* Table of branding strings
|
|
*********************************************************************/
|
|
|
|
static char *ixgbe_strings[] = {
|
|
"Intel(R) PRO/10GbE PCI-Express Network Driver"
|
|
};
|
|
|
|
/*********************************************************************
|
|
* Function prototypes
|
|
*********************************************************************/
|
|
static int ixgbe_probe(device_t);
|
|
static int ixgbe_attach(device_t);
|
|
static int ixgbe_detach(device_t);
|
|
static int ixgbe_shutdown(device_t);
|
|
static void ixgbe_start(struct ifnet *);
|
|
static void ixgbe_start_locked(struct tx_ring *, struct ifnet *);
|
|
#if __FreeBSD_version >= 800000
|
|
static int ixgbe_mq_start(struct ifnet *, struct mbuf *);
|
|
static int ixgbe_mq_start_locked(struct ifnet *,
|
|
struct tx_ring *, struct mbuf *);
|
|
static void ixgbe_qflush(struct ifnet *);
|
|
#endif
|
|
static int ixgbe_ioctl(struct ifnet *, u_long, caddr_t);
|
|
static void ixgbe_watchdog(struct adapter *);
|
|
static void ixgbe_init(void *);
|
|
static void ixgbe_init_locked(struct adapter *);
|
|
static void ixgbe_stop(void *);
|
|
static void ixgbe_media_status(struct ifnet *, struct ifmediareq *);
|
|
static int ixgbe_media_change(struct ifnet *);
|
|
static void ixgbe_identify_hardware(struct adapter *);
|
|
static int ixgbe_allocate_pci_resources(struct adapter *);
|
|
static int ixgbe_allocate_msix(struct adapter *);
|
|
static int ixgbe_allocate_legacy(struct adapter *);
|
|
static int ixgbe_allocate_queues(struct adapter *);
|
|
static int ixgbe_setup_msix(struct adapter *);
|
|
static void ixgbe_free_pci_resources(struct adapter *);
|
|
static void ixgbe_local_timer(void *);
|
|
static int ixgbe_hardware_init(struct adapter *);
|
|
static void ixgbe_setup_interface(device_t, struct adapter *);
|
|
|
|
static int ixgbe_allocate_transmit_buffers(struct tx_ring *);
|
|
static int ixgbe_setup_transmit_structures(struct adapter *);
|
|
static void ixgbe_setup_transmit_ring(struct tx_ring *);
|
|
static void ixgbe_initialize_transmit_units(struct adapter *);
|
|
static void ixgbe_free_transmit_structures(struct adapter *);
|
|
static void ixgbe_free_transmit_buffers(struct tx_ring *);
|
|
|
|
static int ixgbe_allocate_receive_buffers(struct rx_ring *);
|
|
static int ixgbe_setup_receive_structures(struct adapter *);
|
|
static int ixgbe_setup_receive_ring(struct rx_ring *);
|
|
static void ixgbe_initialize_receive_units(struct adapter *);
|
|
static void ixgbe_free_receive_structures(struct adapter *);
|
|
static void ixgbe_free_receive_buffers(struct rx_ring *);
|
|
|
|
static void ixgbe_init_moderation(struct adapter *);
|
|
static void ixgbe_enable_intr(struct adapter *);
|
|
static void ixgbe_disable_intr(struct adapter *);
|
|
static void ixgbe_update_stats_counters(struct adapter *);
|
|
static bool ixgbe_txeof(struct tx_ring *);
|
|
static bool ixgbe_rxeof(struct rx_ring *, int);
|
|
static void ixgbe_rx_checksum(u32, struct mbuf *);
|
|
static void ixgbe_set_promisc(struct adapter *);
|
|
static void ixgbe_disable_promisc(struct adapter *);
|
|
static void ixgbe_set_multi(struct adapter *);
|
|
static void ixgbe_print_hw_stats(struct adapter *);
|
|
static void ixgbe_print_debug_info(struct adapter *);
|
|
static void ixgbe_update_link_status(struct adapter *);
|
|
static int ixgbe_get_buf(struct rx_ring *, int, u8);
|
|
static int ixgbe_xmit(struct tx_ring *, struct mbuf **);
|
|
static int ixgbe_sysctl_stats(SYSCTL_HANDLER_ARGS);
|
|
static int ixgbe_sysctl_debug(SYSCTL_HANDLER_ARGS);
|
|
static int ixgbe_set_flowcntl(SYSCTL_HANDLER_ARGS);
|
|
static int ixgbe_dma_malloc(struct adapter *, bus_size_t,
|
|
struct ixgbe_dma_alloc *, int);
|
|
static void ixgbe_dma_free(struct adapter *, struct ixgbe_dma_alloc *);
|
|
static void ixgbe_add_rx_process_limit(struct adapter *, const char *,
|
|
const char *, int *, int);
|
|
static bool ixgbe_tx_ctx_setup(struct tx_ring *, struct mbuf *);
|
|
static bool ixgbe_tso_setup(struct tx_ring *, struct mbuf *, u32 *);
|
|
static void ixgbe_set_ivar(struct adapter *, u8, u8, s8);
|
|
static void ixgbe_configure_ivars(struct adapter *);
|
|
static u8 * ixgbe_mc_array_itr(struct ixgbe_hw *, u8 **, u32 *);
|
|
|
|
static void ixgbe_setup_vlan_hw_support(struct adapter *);
|
|
static void ixgbe_register_vlan(void *, struct ifnet *, u16);
|
|
static void ixgbe_unregister_vlan(void *, struct ifnet *, u16);
|
|
|
|
static void ixgbe_update_aim(struct rx_ring *);
|
|
|
|
/* Support for pluggable optic modules */
|
|
static bool ixgbe_sfp_probe(struct adapter *);
|
|
|
|
/* Legacy (single vector interrupt handler */
|
|
static void ixgbe_legacy_irq(void *);
|
|
|
|
/* The MSI/X Interrupt handlers */
|
|
static void ixgbe_msix_tx(void *);
|
|
static void ixgbe_msix_rx(void *);
|
|
static void ixgbe_msix_link(void *);
|
|
|
|
/* Deferred interrupt tasklets */
|
|
static void ixgbe_handle_tx(void *, int);
|
|
static void ixgbe_handle_rx(void *, int);
|
|
static void ixgbe_handle_link(void *, int);
|
|
static void ixgbe_handle_msf(void *, int);
|
|
static void ixgbe_handle_mod(void *, int);
|
|
|
|
|
|
/*********************************************************************
|
|
* FreeBSD Device Interface Entry Points
|
|
*********************************************************************/
|
|
|
|
static device_method_t ixgbe_methods[] = {
|
|
/* Device interface */
|
|
DEVMETHOD(device_probe, ixgbe_probe),
|
|
DEVMETHOD(device_attach, ixgbe_attach),
|
|
DEVMETHOD(device_detach, ixgbe_detach),
|
|
DEVMETHOD(device_shutdown, ixgbe_shutdown),
|
|
{0, 0}
|
|
};
|
|
|
|
static driver_t ixgbe_driver = {
|
|
"ix", ixgbe_methods, sizeof(struct adapter),
|
|
};
|
|
|
|
static devclass_t ixgbe_devclass;
|
|
DRIVER_MODULE(ixgbe, pci, ixgbe_driver, ixgbe_devclass, 0, 0);
|
|
|
|
MODULE_DEPEND(ixgbe, pci, 1, 1, 1);
|
|
MODULE_DEPEND(ixgbe, ether, 1, 1, 1);
|
|
|
|
/*
|
|
** TUNEABLE PARAMETERS:
|
|
*/
|
|
|
|
/*
|
|
** These parameters are used in Adaptive
|
|
** Interrupt Moderation. The value is set
|
|
** into EITR and controls the interrupt
|
|
** frequency. They can be modified but
|
|
** be careful in tuning them.
|
|
*/
|
|
static int ixgbe_enable_aim = TRUE;
|
|
TUNABLE_INT("hw.ixgbe.enable_aim", &ixgbe_enable_aim);
|
|
static int ixgbe_low_latency = IXGBE_LOW_LATENCY;
|
|
TUNABLE_INT("hw.ixgbe.low_latency", &ixgbe_low_latency);
|
|
static int ixgbe_ave_latency = IXGBE_AVE_LATENCY;
|
|
TUNABLE_INT("hw.ixgbe.ave_latency", &ixgbe_ave_latency);
|
|
static int ixgbe_bulk_latency = IXGBE_BULK_LATENCY;
|
|
TUNABLE_INT("hw.ixgbe.bulk_latency", &ixgbe_bulk_latency);
|
|
|
|
/* How many packets rxeof tries to clean at a time */
|
|
static int ixgbe_rx_process_limit = 100;
|
|
TUNABLE_INT("hw.ixgbe.rx_process_limit", &ixgbe_rx_process_limit);
|
|
|
|
/* Flow control setting, default to full */
|
|
static int ixgbe_flow_control = ixgbe_fc_full;
|
|
TUNABLE_INT("hw.ixgbe.flow_control", &ixgbe_flow_control);
|
|
|
|
/*
|
|
* MSIX should be the default for best performance,
|
|
* but this allows it to be forced off for testing.
|
|
*/
|
|
static int ixgbe_enable_msix = 1;
|
|
TUNABLE_INT("hw.ixgbe.enable_msix", &ixgbe_enable_msix);
|
|
|
|
/*
|
|
* Header split has seemed to be beneficial in
|
|
* all circumstances tested, so its on by default
|
|
* however this variable will allow it to be disabled
|
|
* for some debug purposes.
|
|
*/
|
|
static bool ixgbe_header_split = TRUE;
|
|
TUNABLE_INT("hw.ixgbe.hdr_split", &ixgbe_header_split);
|
|
|
|
/*
|
|
* Number of Queues, should normally
|
|
* be left at 0, it then autoconfigures to
|
|
* the number of cpus. Each queue is a pair
|
|
* of RX and TX rings with a dedicated interrupt
|
|
*/
|
|
static int ixgbe_num_queues = 0;
|
|
TUNABLE_INT("hw.ixgbe.num_queues", &ixgbe_num_queues);
|
|
|
|
/* Number of TX descriptors per ring */
|
|
static int ixgbe_txd = DEFAULT_TXD;
|
|
TUNABLE_INT("hw.ixgbe.txd", &ixgbe_txd);
|
|
|
|
/* Number of RX descriptors per ring */
|
|
static int ixgbe_rxd = DEFAULT_RXD;
|
|
TUNABLE_INT("hw.ixgbe.rxd", &ixgbe_rxd);
|
|
|
|
/* Total number of Interfaces - need for config sanity check */
|
|
static int ixgbe_total_ports;
|
|
|
|
/*
|
|
** Shadow VFTA table, this is needed because
|
|
** the real filter table gets cleared during
|
|
** a soft reset and we need to repopulate it.
|
|
*/
|
|
static u32 ixgbe_shadow_vfta[IXGBE_VFTA_SIZE];
|
|
|
|
/*
|
|
** The number of scatter-gather segments
|
|
** differs for 82598 and 82599, default to
|
|
** the former.
|
|
*/
|
|
static int ixgbe_num_segs = IXGBE_82598_SCATTER;
|
|
|
|
/*********************************************************************
|
|
* Device identification routine
|
|
*
|
|
* ixgbe_probe determines if the driver should be loaded on
|
|
* adapter based on PCI vendor/device id of the adapter.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
*********************************************************************/
|
|
|
|
static int
|
|
ixgbe_probe(device_t dev)
|
|
{
|
|
ixgbe_vendor_info_t *ent;
|
|
|
|
u16 pci_vendor_id = 0;
|
|
u16 pci_device_id = 0;
|
|
u16 pci_subvendor_id = 0;
|
|
u16 pci_subdevice_id = 0;
|
|
char adapter_name[256];
|
|
|
|
INIT_DEBUGOUT("ixgbe_probe: begin");
|
|
|
|
pci_vendor_id = pci_get_vendor(dev);
|
|
if (pci_vendor_id != IXGBE_INTEL_VENDOR_ID)
|
|
return (ENXIO);
|
|
|
|
pci_device_id = pci_get_device(dev);
|
|
pci_subvendor_id = pci_get_subvendor(dev);
|
|
pci_subdevice_id = pci_get_subdevice(dev);
|
|
|
|
ent = ixgbe_vendor_info_array;
|
|
while (ent->vendor_id != 0) {
|
|
if ((pci_vendor_id == ent->vendor_id) &&
|
|
(pci_device_id == ent->device_id) &&
|
|
|
|
((pci_subvendor_id == ent->subvendor_id) ||
|
|
(ent->subvendor_id == 0)) &&
|
|
|
|
((pci_subdevice_id == ent->subdevice_id) ||
|
|
(ent->subdevice_id == 0))) {
|
|
sprintf(adapter_name, "%s, Version - %s",
|
|
ixgbe_strings[ent->index],
|
|
ixgbe_driver_version);
|
|
device_set_desc_copy(dev, adapter_name);
|
|
++ixgbe_total_ports;
|
|
return (0);
|
|
}
|
|
ent++;
|
|
}
|
|
return (ENXIO);
|
|
}
|
|
|
|
/*********************************************************************
|
|
* Device initialization routine
|
|
*
|
|
* The attach entry point is called when the driver is being loaded.
|
|
* This routine identifies the type of hardware, allocates all resources
|
|
* and initializes the hardware.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
*********************************************************************/
|
|
|
|
static int
|
|
ixgbe_attach(device_t dev)
|
|
{
|
|
struct adapter *adapter;
|
|
struct ixgbe_hw *hw;
|
|
int error = 0;
|
|
u16 pci_device_id;
|
|
u32 ctrl_ext;
|
|
|
|
INIT_DEBUGOUT("ixgbe_attach: begin");
|
|
|
|
/* Allocate, clear, and link in our adapter structure */
|
|
adapter = device_get_softc(dev);
|
|
adapter->dev = adapter->osdep.dev = dev;
|
|
hw = &adapter->hw;
|
|
|
|
/* Core Lock Init*/
|
|
IXGBE_CORE_LOCK_INIT(adapter, device_get_nameunit(dev));
|
|
|
|
/* Keep track of optics */
|
|
pci_device_id = pci_get_device(dev);
|
|
switch (pci_device_id) {
|
|
case IXGBE_DEV_ID_82598_CX4_DUAL_PORT :
|
|
case IXGBE_DEV_ID_82598EB_CX4 :
|
|
adapter->optics = IFM_10G_CX4;
|
|
break;
|
|
case IXGBE_DEV_ID_82598AF_DUAL_PORT :
|
|
case IXGBE_DEV_ID_82598_DA_DUAL_PORT :
|
|
case IXGBE_DEV_ID_82598AF_SINGLE_PORT :
|
|
case IXGBE_DEV_ID_82598AT :
|
|
adapter->optics = IFM_10G_SR;
|
|
break;
|
|
case IXGBE_DEV_ID_82598EB_XF_LR :
|
|
adapter->optics = IFM_10G_LR;
|
|
break;
|
|
case IXGBE_DEV_ID_82599_SFP :
|
|
adapter->optics = IFM_10G_SR;
|
|
ixgbe_num_segs = IXGBE_82599_SCATTER;
|
|
break;
|
|
case IXGBE_DEV_ID_82599_KX4 :
|
|
adapter->optics = IFM_10G_CX4;
|
|
ixgbe_num_segs = IXGBE_82599_SCATTER;
|
|
break;
|
|
case IXGBE_DEV_ID_82599_XAUI_LOM :
|
|
ixgbe_num_segs = IXGBE_82599_SCATTER;
|
|
default:
|
|
break;
|
|
}
|
|
|
|
/* SYSCTL APIs */
|
|
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "stats", CTLTYPE_INT | CTLFLAG_RW,
|
|
adapter, 0, ixgbe_sysctl_stats, "I", "Statistics");
|
|
|
|
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "debug", CTLTYPE_INT | CTLFLAG_RW,
|
|
adapter, 0, ixgbe_sysctl_debug, "I", "Debug Info");
|
|
|
|
SYSCTL_ADD_PROC(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "flow_control", CTLTYPE_INT | CTLFLAG_RW,
|
|
adapter, 0, ixgbe_set_flowcntl, "I", "Flow Control");
|
|
|
|
SYSCTL_ADD_INT(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "enable_aim", CTLTYPE_INT|CTLFLAG_RW,
|
|
&ixgbe_enable_aim, 1, "Interrupt Moderation");
|
|
|
|
SYSCTL_ADD_INT(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "low_latency", CTLTYPE_INT|CTLFLAG_RW,
|
|
&ixgbe_low_latency, 1, "Low Latency");
|
|
|
|
SYSCTL_ADD_INT(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "ave_latency", CTLTYPE_INT|CTLFLAG_RW,
|
|
&ixgbe_ave_latency, 1, "Average Latency");
|
|
|
|
SYSCTL_ADD_INT(device_get_sysctl_ctx(dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(dev)),
|
|
OID_AUTO, "bulk_latency", CTLTYPE_INT|CTLFLAG_RW,
|
|
&ixgbe_bulk_latency, 1, "Bulk Latency");
|
|
|
|
/* Set up the timer callout */
|
|
callout_init_mtx(&adapter->timer, &adapter->core_mtx, 0);
|
|
|
|
/* Determine hardware revision */
|
|
ixgbe_identify_hardware(adapter);
|
|
|
|
/* Do base PCI setup - map BAR0 */
|
|
if (ixgbe_allocate_pci_resources(adapter)) {
|
|
device_printf(dev, "Allocation of PCI resources failed\n");
|
|
error = ENXIO;
|
|
goto err_out;
|
|
}
|
|
|
|
/* Do descriptor calc and sanity checks */
|
|
if (((ixgbe_txd * sizeof(union ixgbe_adv_tx_desc)) % DBA_ALIGN) != 0 ||
|
|
ixgbe_txd < MIN_TXD || ixgbe_txd > MAX_TXD) {
|
|
device_printf(dev, "TXD config issue, using default!\n");
|
|
adapter->num_tx_desc = DEFAULT_TXD;
|
|
} else
|
|
adapter->num_tx_desc = ixgbe_txd;
|
|
|
|
/*
|
|
** With many RX rings it is easy to exceed the
|
|
** system mbuf allocation. Tuning nmbclusters
|
|
** can alleviate this.
|
|
*/
|
|
if (nmbclusters > 0 ) {
|
|
int s;
|
|
s = (ixgbe_rxd * adapter->num_queues) * ixgbe_total_ports;
|
|
if (s > nmbclusters) {
|
|
device_printf(dev, "RX Descriptors exceed "
|
|
"system mbuf max, using default instead!\n");
|
|
ixgbe_rxd = DEFAULT_RXD;
|
|
}
|
|
}
|
|
|
|
if (((ixgbe_rxd * sizeof(union ixgbe_adv_rx_desc)) % DBA_ALIGN) != 0 ||
|
|
ixgbe_rxd < MIN_TXD || ixgbe_rxd > MAX_TXD) {
|
|
device_printf(dev, "RXD config issue, using default!\n");
|
|
adapter->num_rx_desc = DEFAULT_RXD;
|
|
} else
|
|
adapter->num_rx_desc = ixgbe_rxd;
|
|
|
|
/* Allocate our TX/RX Queues */
|
|
if (ixgbe_allocate_queues(adapter)) {
|
|
error = ENOMEM;
|
|
goto err_out;
|
|
}
|
|
|
|
/* Initialize the shared code */
|
|
error = ixgbe_init_shared_code(hw);
|
|
if (error == IXGBE_ERR_SFP_NOT_PRESENT) {
|
|
/*
|
|
** No optics in this port, set up
|
|
** so the timer routine will probe
|
|
** for later insertion.
|
|
*/
|
|
adapter->sfp_probe = TRUE;
|
|
error = 0;
|
|
} else if (error == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
device_printf(dev,"Unsupported SFP+ module detected!\n");
|
|
error = EIO;
|
|
goto err_late;
|
|
} else if (error) {
|
|
device_printf(dev,"Unable to initialize the shared code\n");
|
|
error = EIO;
|
|
goto err_late;
|
|
}
|
|
|
|
/* Initialize the hardware */
|
|
if (ixgbe_hardware_init(adapter)) {
|
|
device_printf(dev,"Unable to initialize the hardware\n");
|
|
error = EIO;
|
|
goto err_late;
|
|
}
|
|
|
|
if ((adapter->msix > 1) && (ixgbe_enable_msix))
|
|
error = ixgbe_allocate_msix(adapter);
|
|
else
|
|
error = ixgbe_allocate_legacy(adapter);
|
|
if (error)
|
|
goto err_late;
|
|
|
|
/* Setup OS specific network interface */
|
|
ixgbe_setup_interface(dev, adapter);
|
|
|
|
#ifdef IXGBE_IEEE1588
|
|
/*
|
|
** Setup the timer: IEEE 1588 support
|
|
*/
|
|
adapter->cycles.read = ixgbe_read_clock;
|
|
adapter->cycles.mask = (u64)-1;
|
|
adapter->cycles.mult = 1;
|
|
adapter->cycles.shift = IXGBE_TSYNC_SHIFT;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_TIMINCA, (1<<24) |
|
|
IXGBE_TSYNC_CYCLE_TIME * IXGBE_TSYNC_SHIFT);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_SYSTIML, 0x00000000);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_SYSTIMH, 0xFF800000);
|
|
|
|
// JFV - this is not complete yet
|
|
#endif
|
|
|
|
/* Sysctl for limiting the amount of work done in the taskqueue */
|
|
ixgbe_add_rx_process_limit(adapter, "rx_processing_limit",
|
|
"max number of rx packets to process", &adapter->rx_process_limit,
|
|
ixgbe_rx_process_limit);
|
|
|
|
/* Initialize statistics */
|
|
ixgbe_update_stats_counters(adapter);
|
|
|
|
/* Register for VLAN events */
|
|
adapter->vlan_attach = EVENTHANDLER_REGISTER(vlan_config,
|
|
ixgbe_register_vlan, adapter, EVENTHANDLER_PRI_FIRST);
|
|
adapter->vlan_detach = EVENTHANDLER_REGISTER(vlan_unconfig,
|
|
ixgbe_unregister_vlan, adapter, EVENTHANDLER_PRI_FIRST);
|
|
|
|
/* let hardware know driver is loaded */
|
|
ctrl_ext = IXGBE_READ_REG(hw, IXGBE_CTRL_EXT);
|
|
ctrl_ext |= IXGBE_CTRL_EXT_DRV_LOAD;
|
|
IXGBE_WRITE_REG(hw, IXGBE_CTRL_EXT, ctrl_ext);
|
|
|
|
INIT_DEBUGOUT("ixgbe_attach: end");
|
|
return (0);
|
|
err_late:
|
|
ixgbe_free_transmit_structures(adapter);
|
|
ixgbe_free_receive_structures(adapter);
|
|
err_out:
|
|
ixgbe_free_pci_resources(adapter);
|
|
return (error);
|
|
|
|
}
|
|
|
|
/*********************************************************************
|
|
* Device removal routine
|
|
*
|
|
* The detach entry point is called when the driver is being removed.
|
|
* This routine stops the adapter and deallocates all the resources
|
|
* that were allocated for driver operation.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
*********************************************************************/
|
|
|
|
static int
|
|
ixgbe_detach(device_t dev)
|
|
{
|
|
struct adapter *adapter = device_get_softc(dev);
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
u32 ctrl_ext;
|
|
|
|
INIT_DEBUGOUT("ixgbe_detach: begin");
|
|
|
|
/* Make sure VLANS are not using driver */
|
|
if (adapter->ifp->if_vlantrunk != NULL) {
|
|
device_printf(dev,"Vlan in use, detach first\n");
|
|
return (EBUSY);
|
|
}
|
|
|
|
IXGBE_CORE_LOCK(adapter);
|
|
ixgbe_stop(adapter);
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
if (txr->tq) {
|
|
taskqueue_drain(txr->tq, &txr->tx_task);
|
|
taskqueue_free(txr->tq);
|
|
}
|
|
}
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, rxr++) {
|
|
if (rxr->tq) {
|
|
taskqueue_drain(rxr->tq, &rxr->rx_task);
|
|
taskqueue_free(rxr->tq);
|
|
}
|
|
}
|
|
|
|
/* Drain the Link queue */
|
|
if (adapter->tq) {
|
|
taskqueue_drain(adapter->tq, &adapter->link_task);
|
|
taskqueue_drain(adapter->tq, &adapter->mod_task);
|
|
taskqueue_drain(adapter->tq, &adapter->msf_task);
|
|
taskqueue_free(adapter->tq);
|
|
}
|
|
|
|
/* let hardware know driver is unloading */
|
|
ctrl_ext = IXGBE_READ_REG(&adapter->hw, IXGBE_CTRL_EXT);
|
|
ctrl_ext &= ~IXGBE_CTRL_EXT_DRV_LOAD;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_CTRL_EXT, ctrl_ext);
|
|
|
|
/* Unregister VLAN events */
|
|
if (adapter->vlan_attach != NULL)
|
|
EVENTHANDLER_DEREGISTER(vlan_config, adapter->vlan_attach);
|
|
if (adapter->vlan_detach != NULL)
|
|
EVENTHANDLER_DEREGISTER(vlan_unconfig, adapter->vlan_detach);
|
|
|
|
ether_ifdetach(adapter->ifp);
|
|
callout_drain(&adapter->timer);
|
|
ixgbe_free_pci_resources(adapter);
|
|
bus_generic_detach(dev);
|
|
if_free(adapter->ifp);
|
|
|
|
ixgbe_free_transmit_structures(adapter);
|
|
ixgbe_free_receive_structures(adapter);
|
|
|
|
IXGBE_CORE_LOCK_DESTROY(adapter);
|
|
return (0);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Shutdown entry point
|
|
*
|
|
**********************************************************************/
|
|
|
|
static int
|
|
ixgbe_shutdown(device_t dev)
|
|
{
|
|
struct adapter *adapter = device_get_softc(dev);
|
|
IXGBE_CORE_LOCK(adapter);
|
|
ixgbe_stop(adapter);
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
return (0);
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
* Transmit entry point
|
|
*
|
|
* ixgbe_start is called by the stack to initiate a transmit.
|
|
* The driver will remain in this routine as long as there are
|
|
* packets to transmit and transmit resources are available.
|
|
* In case resources are not available stack is notified and
|
|
* the packet is requeued.
|
|
**********************************************************************/
|
|
|
|
static void
|
|
ixgbe_start_locked(struct tx_ring *txr, struct ifnet * ifp)
|
|
{
|
|
struct mbuf *m_head;
|
|
struct adapter *adapter = txr->adapter;
|
|
|
|
IXGBE_TX_LOCK_ASSERT(txr);
|
|
|
|
if ((ifp->if_drv_flags & (IFF_DRV_RUNNING|IFF_DRV_OACTIVE)) !=
|
|
IFF_DRV_RUNNING)
|
|
return;
|
|
if (!adapter->link_active)
|
|
return;
|
|
|
|
while (!IFQ_DRV_IS_EMPTY(&ifp->if_snd)) {
|
|
|
|
IFQ_DRV_DEQUEUE(&ifp->if_snd, m_head);
|
|
if (m_head == NULL)
|
|
break;
|
|
|
|
if (ixgbe_xmit(txr, &m_head)) {
|
|
if (m_head == NULL)
|
|
break;
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
IFQ_DRV_PREPEND(&ifp->if_snd, m_head);
|
|
break;
|
|
}
|
|
/* Send a copy of the frame to the BPF listener */
|
|
ETHER_BPF_MTAP(ifp, m_head);
|
|
|
|
/* Set timeout in case hardware has problems transmitting */
|
|
txr->watchdog_timer = IXGBE_TX_TIMEOUT;
|
|
|
|
}
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* Legacy TX start - called by the stack, this
|
|
* always uses the first tx ring, and should
|
|
* not be used with multiqueue tx enabled.
|
|
*/
|
|
static void
|
|
ixgbe_start(struct ifnet *ifp)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
IXGBE_TX_LOCK(txr);
|
|
ixgbe_start_locked(txr, ifp);
|
|
IXGBE_TX_UNLOCK(txr);
|
|
}
|
|
return;
|
|
}
|
|
|
|
#if __FreeBSD_version >= 800000
|
|
/*
|
|
** Multiqueue Transmit driver
|
|
**
|
|
*/
|
|
static int
|
|
ixgbe_mq_start(struct ifnet *ifp, struct mbuf *m)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
struct tx_ring *txr;
|
|
int i = 0, err = 0;
|
|
|
|
/* Which queue to use */
|
|
if ((m->m_flags & M_FLOWID) != 0)
|
|
i = m->m_pkthdr.flowid % adapter->num_queues;
|
|
txr = &adapter->tx_rings[i];
|
|
|
|
if (IXGBE_TX_TRYLOCK(txr)) {
|
|
err = ixgbe_mq_start_locked(ifp, txr, m);
|
|
IXGBE_TX_UNLOCK(txr);
|
|
} else
|
|
err = drbr_enqueue(ifp, txr->br, m);
|
|
|
|
return (err);
|
|
}
|
|
|
|
static int
|
|
ixgbe_mq_start_locked(struct ifnet *ifp, struct tx_ring *txr, struct mbuf *m)
|
|
{
|
|
struct adapter *adapter = txr->adapter;
|
|
struct mbuf *next;
|
|
int err = 0;
|
|
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0) {
|
|
err = drbr_enqueue(ifp, txr->br, m);
|
|
return (err);
|
|
}
|
|
|
|
if (m == NULL) /* Called by tasklet */
|
|
goto process;
|
|
|
|
/* If nothing queued go right to xmit */
|
|
if (drbr_empty(ifp, txr->br)) {
|
|
if (ixgbe_xmit(txr, &m)) {
|
|
if (m && (err = drbr_enqueue(ifp, txr->br, m)) != 0)
|
|
return (err);
|
|
} else {
|
|
/* Success, update stats */
|
|
drbr_stats_update(ifp, m->m_pkthdr.len, m->m_flags);
|
|
/* Send a copy of the frame to the BPF listener */
|
|
ETHER_BPF_MTAP(ifp, m);
|
|
/* Set the watchdog */
|
|
txr->watchdog_timer = IXGBE_TX_TIMEOUT;
|
|
}
|
|
|
|
} else if ((err = drbr_enqueue(ifp, txr->br, m)) != 0)
|
|
return (err);
|
|
|
|
process:
|
|
if (drbr_empty(ifp, txr->br))
|
|
return (err);
|
|
|
|
/* Process the queue */
|
|
while (TRUE) {
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING) == 0)
|
|
break;
|
|
next = drbr_dequeue(ifp, txr->br);
|
|
if (next == NULL)
|
|
break;
|
|
if (ixgbe_xmit(txr, &next))
|
|
break;
|
|
ETHER_BPF_MTAP(ifp, next);
|
|
/* Set the watchdog */
|
|
txr->watchdog_timer = IXGBE_TX_TIMEOUT;
|
|
}
|
|
|
|
if (txr->tx_avail <= IXGBE_TX_OP_THRESHOLD)
|
|
ifp->if_drv_flags |= IFF_DRV_OACTIVE;
|
|
|
|
return (err);
|
|
}
|
|
|
|
/*
|
|
** Flush all ring buffers
|
|
*/
|
|
static void
|
|
ixgbe_qflush(struct ifnet *ifp)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct mbuf *m;
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
IXGBE_TX_LOCK(txr);
|
|
while ((m = buf_ring_dequeue_sc(txr->br)) != NULL)
|
|
m_freem(m);
|
|
IXGBE_TX_UNLOCK(txr);
|
|
}
|
|
if_qflush(ifp);
|
|
}
|
|
#endif /* __FreeBSD_version >= 800000 */
|
|
|
|
/*********************************************************************
|
|
* Ioctl entry point
|
|
*
|
|
* ixgbe_ioctl is called when the user wants to configure the
|
|
* interface.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
**********************************************************************/
|
|
|
|
static int
|
|
ixgbe_ioctl(struct ifnet * ifp, u_long command, caddr_t data)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
struct ifreq *ifr = (struct ifreq *) data;
|
|
#ifdef INET
|
|
struct ifaddr *ifa = (struct ifaddr *) data;
|
|
#endif
|
|
int error = 0;
|
|
|
|
switch (command) {
|
|
case SIOCSIFADDR:
|
|
#ifdef INET
|
|
IOCTL_DEBUGOUT("ioctl: SIOCxIFADDR (Get/Set Interface Addr)");
|
|
if (ifa->ifa_addr->sa_family == AF_INET) {
|
|
ifp->if_flags |= IFF_UP;
|
|
if (!(ifp->if_drv_flags & IFF_DRV_RUNNING)) {
|
|
IXGBE_CORE_LOCK(adapter);
|
|
ixgbe_init_locked(adapter);
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
}
|
|
arp_ifinit(ifp, ifa);
|
|
} else
|
|
#endif
|
|
ether_ioctl(ifp, command, data);
|
|
break;
|
|
case SIOCSIFMTU:
|
|
IOCTL_DEBUGOUT("ioctl: SIOCSIFMTU (Set Interface MTU)");
|
|
if (ifr->ifr_mtu > IXGBE_MAX_FRAME_SIZE - ETHER_HDR_LEN) {
|
|
error = EINVAL;
|
|
} else {
|
|
IXGBE_CORE_LOCK(adapter);
|
|
ifp->if_mtu = ifr->ifr_mtu;
|
|
adapter->max_frame_size =
|
|
ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
|
|
ixgbe_init_locked(adapter);
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
}
|
|
break;
|
|
case SIOCSIFFLAGS:
|
|
IOCTL_DEBUGOUT("ioctl: SIOCSIFFLAGS (Set Interface Flags)");
|
|
IXGBE_CORE_LOCK(adapter);
|
|
if (ifp->if_flags & IFF_UP) {
|
|
if ((ifp->if_drv_flags & IFF_DRV_RUNNING)) {
|
|
if ((ifp->if_flags ^ adapter->if_flags) &
|
|
(IFF_PROMISC | IFF_ALLMULTI)) {
|
|
ixgbe_disable_promisc(adapter);
|
|
ixgbe_set_promisc(adapter);
|
|
}
|
|
} else
|
|
ixgbe_init_locked(adapter);
|
|
} else
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
ixgbe_stop(adapter);
|
|
adapter->if_flags = ifp->if_flags;
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
break;
|
|
case SIOCADDMULTI:
|
|
case SIOCDELMULTI:
|
|
IOCTL_DEBUGOUT("ioctl: SIOC(ADD|DEL)MULTI");
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
IXGBE_CORE_LOCK(adapter);
|
|
ixgbe_disable_intr(adapter);
|
|
ixgbe_set_multi(adapter);
|
|
ixgbe_enable_intr(adapter);
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
}
|
|
break;
|
|
case SIOCSIFMEDIA:
|
|
case SIOCGIFMEDIA:
|
|
IOCTL_DEBUGOUT("ioctl: SIOCxIFMEDIA (Get/Set Interface Media)");
|
|
error = ifmedia_ioctl(ifp, ifr, &adapter->media, command);
|
|
break;
|
|
case SIOCSIFCAP:
|
|
{
|
|
int mask = ifr->ifr_reqcap ^ ifp->if_capenable;
|
|
IOCTL_DEBUGOUT("ioctl: SIOCSIFCAP (Set Capabilities)");
|
|
if (mask & IFCAP_HWCSUM)
|
|
ifp->if_capenable ^= IFCAP_HWCSUM;
|
|
if (mask & IFCAP_TSO4)
|
|
ifp->if_capenable ^= IFCAP_TSO4;
|
|
if (mask & IFCAP_LRO)
|
|
ifp->if_capenable ^= IFCAP_LRO;
|
|
if (mask & IFCAP_VLAN_HWTAGGING)
|
|
ifp->if_capenable ^= IFCAP_VLAN_HWTAGGING;
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING)
|
|
ixgbe_init(adapter);
|
|
VLAN_CAPABILITIES(ifp);
|
|
break;
|
|
}
|
|
|
|
#ifdef IXGBE_IEEE1588
|
|
/*
|
|
** IOCTL support for Precision Time (IEEE 1588) Support
|
|
*/
|
|
case SIOCSHWTSTAMP:
|
|
error = ixgbe_hwtstamp_ioctl(adapter, ifp);
|
|
break;
|
|
#endif
|
|
|
|
default:
|
|
IOCTL_DEBUGOUT1("ioctl: UNKNOWN (0x%X)\n", (int)command);
|
|
error = ether_ioctl(ifp, command, data);
|
|
break;
|
|
}
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*********************************************************************
|
|
* Watchdog entry point
|
|
*
|
|
* This routine is called by the local timer
|
|
* to detect hardware hangs .
|
|
*
|
|
**********************************************************************/
|
|
|
|
static void
|
|
ixgbe_watchdog(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
bool tx_hang = FALSE;
|
|
|
|
IXGBE_CORE_LOCK_ASSERT(adapter);
|
|
|
|
/*
|
|
* The timer is set to 5 every time ixgbe_start() queues a packet.
|
|
* Then ixgbe_txeof() keeps resetting to 5 as long as it cleans at
|
|
* least one descriptor.
|
|
* Finally, anytime all descriptors are clean the timer is
|
|
* set to 0.
|
|
*/
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
u32 head, tail;
|
|
|
|
IXGBE_TX_LOCK(txr);
|
|
if (txr->watchdog_timer == 0 || --txr->watchdog_timer) {
|
|
IXGBE_TX_UNLOCK(txr);
|
|
continue;
|
|
} else {
|
|
head = IXGBE_READ_REG(hw, IXGBE_TDH(i));
|
|
tail = IXGBE_READ_REG(hw, IXGBE_TDT(i));
|
|
if (head == tail) { /* last minute check */
|
|
IXGBE_TX_UNLOCK(txr);
|
|
continue;
|
|
}
|
|
/* Well, seems something is really hung */
|
|
tx_hang = TRUE;
|
|
IXGBE_TX_UNLOCK(txr);
|
|
break;
|
|
}
|
|
}
|
|
if (tx_hang == FALSE)
|
|
return;
|
|
|
|
/*
|
|
* If we are in this routine because of pause frames, then don't
|
|
* reset the hardware.
|
|
*/
|
|
if (IXGBE_READ_REG(hw, IXGBE_TFCS) & IXGBE_TFCS_TXOFF) {
|
|
txr = adapter->tx_rings; /* reset pointer */
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
IXGBE_TX_LOCK(txr);
|
|
txr->watchdog_timer = IXGBE_TX_TIMEOUT;
|
|
IXGBE_TX_UNLOCK(txr);
|
|
}
|
|
return;
|
|
}
|
|
|
|
|
|
device_printf(adapter->dev, "Watchdog timeout -- resetting\n");
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
device_printf(dev,"Queue(%d) tdh = %d, hw tdt = %d\n", i,
|
|
IXGBE_READ_REG(hw, IXGBE_TDH(i)),
|
|
IXGBE_READ_REG(hw, IXGBE_TDT(i)));
|
|
device_printf(dev,"TX(%d) desc avail = %d,"
|
|
"Next TX to Clean = %d\n",
|
|
i, txr->tx_avail, txr->next_tx_to_clean);
|
|
}
|
|
adapter->ifp->if_drv_flags &= ~IFF_DRV_RUNNING;
|
|
adapter->watchdog_events++;
|
|
|
|
ixgbe_init_locked(adapter);
|
|
}
|
|
|
|
/*********************************************************************
|
|
* Init entry point
|
|
*
|
|
* This routine is used in two ways. It is used by the stack as
|
|
* init entry point in network interface structure. It is also used
|
|
* by the driver as a hw/sw initialization routine to get to a
|
|
* consistent state.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
**********************************************************************/
|
|
#define IXGBE_MHADD_MFS_SHIFT 16
|
|
|
|
static void
|
|
ixgbe_init_locked(struct adapter *adapter)
|
|
{
|
|
struct ifnet *ifp = adapter->ifp;
|
|
device_t dev = adapter->dev;
|
|
struct ixgbe_hw *hw;
|
|
u32 k, txdctl, mhadd, gpie;
|
|
u32 rxdctl, rxctrl;
|
|
int err;
|
|
|
|
INIT_DEBUGOUT("ixgbe_init: begin");
|
|
|
|
hw = &adapter->hw;
|
|
mtx_assert(&adapter->core_mtx, MA_OWNED);
|
|
|
|
ixgbe_stop(adapter);
|
|
|
|
/* Get the latest mac address, User can use a LAA */
|
|
bcopy(IF_LLADDR(adapter->ifp), adapter->hw.mac.addr,
|
|
IXGBE_ETH_LENGTH_OF_ADDRESS);
|
|
ixgbe_set_rar(&adapter->hw, 0, adapter->hw.mac.addr, 0, 1);
|
|
adapter->hw.addr_ctrl.rar_used_count = 1;
|
|
|
|
/* Initialize the hardware */
|
|
if (ixgbe_hardware_init(adapter)) {
|
|
device_printf(dev, "Unable to initialize the hardware\n");
|
|
return;
|
|
}
|
|
|
|
/* Prepare transmit descriptors and buffers */
|
|
if (ixgbe_setup_transmit_structures(adapter)) {
|
|
device_printf(dev,"Could not setup transmit structures\n");
|
|
ixgbe_stop(adapter);
|
|
return;
|
|
}
|
|
|
|
ixgbe_initialize_transmit_units(adapter);
|
|
|
|
/* Setup Multicast table */
|
|
ixgbe_set_multi(adapter);
|
|
|
|
/*
|
|
** Determine the correct mbuf pool
|
|
** for doing jumbo/headersplit
|
|
*/
|
|
if (ifp->if_mtu > ETHERMTU)
|
|
adapter->rx_mbuf_sz = MJUMPAGESIZE;
|
|
else
|
|
adapter->rx_mbuf_sz = MCLBYTES;
|
|
|
|
/* Prepare receive descriptors and buffers */
|
|
if (ixgbe_setup_receive_structures(adapter)) {
|
|
device_printf(dev,"Could not setup receive structures\n");
|
|
ixgbe_stop(adapter);
|
|
return;
|
|
}
|
|
|
|
/* Configure RX settings */
|
|
ixgbe_initialize_receive_units(adapter);
|
|
|
|
/* Configure Interrupt Moderation */
|
|
ixgbe_init_moderation(adapter);
|
|
|
|
gpie = IXGBE_READ_REG(&adapter->hw, IXGBE_GPIE);
|
|
|
|
if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
|
|
gpie |= IXGBE_SDP1_GPIEN;
|
|
gpie |= IXGBE_SDP2_GPIEN;
|
|
}
|
|
|
|
/* Enable Fan Failure Interrupt */
|
|
if (hw->device_id == IXGBE_DEV_ID_82598AT)
|
|
gpie |= IXGBE_SDP1_GPIEN;
|
|
|
|
if (adapter->msix > 1) {
|
|
/* Enable Enhanced MSIX mode */
|
|
gpie |= IXGBE_GPIE_MSIX_MODE;
|
|
gpie |= IXGBE_GPIE_EIAME | IXGBE_GPIE_PBA_SUPPORT |
|
|
IXGBE_GPIE_OCD;
|
|
}
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_GPIE, gpie);
|
|
|
|
/* Set the various hardware offload abilities */
|
|
ifp->if_hwassist = 0;
|
|
if (ifp->if_capenable & IFCAP_TSO4)
|
|
ifp->if_hwassist |= CSUM_TSO;
|
|
if (ifp->if_capenable & IFCAP_TXCSUM)
|
|
ifp->if_hwassist = (CSUM_TCP | CSUM_UDP);
|
|
|
|
/* Set MTU size */
|
|
if (ifp->if_mtu > ETHERMTU) {
|
|
mhadd = IXGBE_READ_REG(&adapter->hw, IXGBE_MHADD);
|
|
mhadd &= ~IXGBE_MHADD_MFS_MASK;
|
|
mhadd |= adapter->max_frame_size << IXGBE_MHADD_MFS_SHIFT;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_MHADD, mhadd);
|
|
}
|
|
|
|
/* Now enable all the queues */
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++) {
|
|
txdctl = IXGBE_READ_REG(&adapter->hw, IXGBE_TXDCTL(i));
|
|
txdctl |= IXGBE_TXDCTL_ENABLE;
|
|
/* Set WTHRESH to 8, burst writeback */
|
|
txdctl |= (8 << 16);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_TXDCTL(i), txdctl);
|
|
}
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++) {
|
|
rxdctl = IXGBE_READ_REG(&adapter->hw, IXGBE_RXDCTL(i));
|
|
/* PTHRESH set to 32 */
|
|
rxdctl |= 0x0020;
|
|
rxdctl |= IXGBE_RXDCTL_ENABLE;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_RXDCTL(i), rxdctl);
|
|
for (k = 0; k < 10; k++) {
|
|
if (IXGBE_READ_REG(hw, IXGBE_RXDCTL(i)) &
|
|
IXGBE_RXDCTL_ENABLE)
|
|
break;
|
|
else
|
|
msec_delay(1);
|
|
}
|
|
wmb();
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDT(i), adapter->num_rx_desc - 1);
|
|
}
|
|
|
|
/* Set up VLAN offloads and filter */
|
|
ixgbe_setup_vlan_hw_support(adapter);
|
|
|
|
/* Enable Receive engine */
|
|
rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB)
|
|
rxctrl |= IXGBE_RXCTRL_DMBYPS;
|
|
rxctrl |= IXGBE_RXCTRL_RXEN;
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXCTRL, rxctrl);
|
|
|
|
callout_reset(&adapter->timer, hz, ixgbe_local_timer, adapter);
|
|
|
|
/* Set up MSI/X routing */
|
|
if (ixgbe_enable_msix)
|
|
ixgbe_configure_ivars(adapter);
|
|
else { /* Simple settings for Legacy/MSI */
|
|
ixgbe_set_ivar(adapter, 0, 0, 0);
|
|
ixgbe_set_ivar(adapter, 0, 0, 1);
|
|
}
|
|
|
|
ixgbe_enable_intr(adapter);
|
|
|
|
/*
|
|
** Check on any SFP devices that
|
|
** need to be kick-started
|
|
*/
|
|
err = hw->phy.ops.identify(hw);
|
|
if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
device_printf(dev,
|
|
"Unsupported SFP+ module type was detected.\n");
|
|
ixgbe_detach(dev);
|
|
return;
|
|
}
|
|
if (ixgbe_is_sfp(hw)) {
|
|
if (hw->phy.multispeed_fiber) {
|
|
hw->mac.ops.setup_sfp(hw);
|
|
taskqueue_enqueue(adapter->tq, &adapter->msf_task);
|
|
} else
|
|
taskqueue_enqueue(adapter->tq, &adapter->mod_task);
|
|
} else
|
|
taskqueue_enqueue(adapter->tq, &adapter->link_task);
|
|
|
|
/* Now inform the stack we're ready */
|
|
ifp->if_drv_flags |= IFF_DRV_RUNNING;
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
ixgbe_init(void *arg)
|
|
{
|
|
struct adapter *adapter = arg;
|
|
|
|
IXGBE_CORE_LOCK(adapter);
|
|
ixgbe_init_locked(adapter);
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
return;
|
|
}
|
|
|
|
|
|
/*
|
|
**
|
|
** MSIX Interrupt Handlers and Tasklets
|
|
**
|
|
*/
|
|
|
|
static inline void
|
|
ixgbe_enable_queue(struct adapter *adapter, u32 vector)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u64 queue = (u64)(1 << vector);
|
|
u32 mask;
|
|
|
|
if (hw->mac.type == ixgbe_mac_82598EB) {
|
|
mask = (IXGBE_EIMS_RTX_QUEUE & queue);
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS, mask);
|
|
} else {
|
|
mask = (queue & 0xFFFFFFFF);
|
|
if (mask)
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(0), mask);
|
|
mask = (queue >> 32);
|
|
if (mask)
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS_EX(1), mask);
|
|
}
|
|
}
|
|
|
|
static inline void
|
|
ixgbe_disable_queue(struct adapter *adapter, u32 vector)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u64 queue = (u64)(1 << vector);
|
|
u32 mask;
|
|
|
|
if (hw->mac.type == ixgbe_mac_82598EB) {
|
|
mask = (IXGBE_EIMS_RTX_QUEUE & queue);
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMC, mask);
|
|
} else {
|
|
mask = (queue & 0xFFFFFFFF);
|
|
if (mask)
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(0), mask);
|
|
mask = (queue >> 32);
|
|
if (mask)
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMC_EX(1), mask);
|
|
}
|
|
}
|
|
|
|
static inline void
|
|
ixgbe_rearm_rx_queues(struct adapter *adapter, u64 queues)
|
|
{
|
|
u32 mask;
|
|
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
|
|
mask = (IXGBE_EIMS_RTX_QUEUE & queues);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS, mask);
|
|
} else {
|
|
mask = (queues & 0xFFFFFFFF);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(0), mask);
|
|
mask = (queues >> 32);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EICS_EX(1), mask);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ixgbe_handle_rx(void *context, int pending)
|
|
{
|
|
struct rx_ring *rxr = context;
|
|
struct adapter *adapter = rxr->adapter;
|
|
u32 loop = MAX_LOOP;
|
|
bool more;
|
|
|
|
do {
|
|
more = ixgbe_rxeof(rxr, -1);
|
|
} while (loop-- && more);
|
|
/* Reenable this interrupt */
|
|
ixgbe_enable_queue(adapter, rxr->msix);
|
|
}
|
|
|
|
static void
|
|
ixgbe_handle_tx(void *context, int pending)
|
|
{
|
|
struct tx_ring *txr = context;
|
|
struct adapter *adapter = txr->adapter;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
u32 loop = MAX_LOOP;
|
|
bool more;
|
|
|
|
IXGBE_TX_LOCK(txr);
|
|
do {
|
|
more = ixgbe_txeof(txr);
|
|
} while (loop-- && more);
|
|
|
|
if (ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
#if __FreeBSD_version >= 800000
|
|
if (!drbr_empty(ifp, txr->br))
|
|
ixgbe_mq_start_locked(ifp, txr, NULL);
|
|
#else
|
|
if (!IFQ_DRV_IS_EMPTY(&ifp->if_snd))
|
|
ixgbe_start_locked(txr, ifp);
|
|
#endif
|
|
}
|
|
|
|
IXGBE_TX_UNLOCK(txr);
|
|
/* Reenable this interrupt */
|
|
ixgbe_enable_queue(adapter, txr->msix);
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Legacy Interrupt Service routine
|
|
*
|
|
**********************************************************************/
|
|
|
|
static void
|
|
ixgbe_legacy_irq(void *arg)
|
|
{
|
|
struct adapter *adapter = arg;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
bool more;
|
|
u32 reg_eicr, loop = MAX_LOOP;
|
|
|
|
|
|
reg_eicr = IXGBE_READ_REG(hw, IXGBE_EICR);
|
|
|
|
if (reg_eicr == 0) {
|
|
ixgbe_enable_intr(adapter);
|
|
return;
|
|
}
|
|
|
|
if (ixgbe_rxeof(rxr, adapter->rx_process_limit))
|
|
taskqueue_enqueue(rxr->tq, &rxr->rx_task);
|
|
|
|
IXGBE_TX_LOCK(txr);
|
|
++txr->tx_irq;
|
|
do {
|
|
more = ixgbe_txeof(txr);
|
|
} while (loop-- && more);
|
|
IXGBE_TX_UNLOCK(txr);
|
|
|
|
if (more)
|
|
taskqueue_enqueue(txr->tq, &txr->tx_task);
|
|
|
|
/* Check for fan failure */
|
|
if ((hw->phy.media_type == ixgbe_media_type_copper) &&
|
|
(reg_eicr & IXGBE_EICR_GPI_SDP1)) {
|
|
device_printf(adapter->dev, "\nCRITICAL: FAN FAILURE!! "
|
|
"REPLACE IMMEDIATELY!!\n");
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS, IXGBE_EICR_GPI_SDP1);
|
|
}
|
|
|
|
/* Link status change */
|
|
if (reg_eicr & IXGBE_EICR_LSC) {
|
|
ixgbe_check_link(&adapter->hw,
|
|
&adapter->link_speed, &adapter->link_up, 0);
|
|
ixgbe_update_link_status(adapter);
|
|
}
|
|
|
|
/* Update interrupt rate */
|
|
if (ixgbe_enable_aim == TRUE)
|
|
ixgbe_update_aim(rxr);
|
|
|
|
ixgbe_enable_intr(adapter);
|
|
return;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* MSI TX Interrupt Service routine
|
|
*
|
|
**********************************************************************/
|
|
void
|
|
ixgbe_msix_tx(void *arg)
|
|
{
|
|
struct tx_ring *txr = arg;
|
|
struct adapter *adapter = txr->adapter;
|
|
bool more;
|
|
|
|
ixgbe_disable_queue(adapter, txr->msix);
|
|
|
|
IXGBE_TX_LOCK(txr);
|
|
++txr->tx_irq;
|
|
more = ixgbe_txeof(txr);
|
|
IXGBE_TX_UNLOCK(txr);
|
|
if (more)
|
|
taskqueue_enqueue(txr->tq, &txr->tx_task);
|
|
else /* Reenable this interrupt */
|
|
ixgbe_enable_queue(adapter, txr->msix);
|
|
return;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* MSIX RX Interrupt Service routine
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_msix_rx(void *arg)
|
|
{
|
|
struct rx_ring *rxr = arg;
|
|
struct adapter *adapter = rxr->adapter;
|
|
bool more;
|
|
|
|
ixgbe_disable_queue(adapter, rxr->msix);
|
|
|
|
++rxr->rx_irq;
|
|
more = ixgbe_rxeof(rxr, adapter->rx_process_limit);
|
|
|
|
/* Update interrupt rate */
|
|
if (ixgbe_enable_aim == TRUE)
|
|
ixgbe_update_aim(rxr);
|
|
|
|
if (more)
|
|
taskqueue_enqueue(rxr->tq, &rxr->rx_task);
|
|
else
|
|
ixgbe_enable_queue(adapter, rxr->msix);
|
|
return;
|
|
}
|
|
|
|
|
|
static void
|
|
ixgbe_msix_link(void *arg)
|
|
{
|
|
struct adapter *adapter = arg;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 reg_eicr;
|
|
|
|
++adapter->link_irq;
|
|
|
|
/* First get the cause */
|
|
reg_eicr = IXGBE_READ_REG(hw, IXGBE_EICS);
|
|
/* Clear interrupt with write */
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, reg_eicr);
|
|
|
|
/* Link status change */
|
|
if (reg_eicr & IXGBE_EICR_LSC)
|
|
taskqueue_enqueue(adapter->tq, &adapter->link_task);
|
|
|
|
if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
|
|
if (reg_eicr & IXGBE_EICR_ECC) {
|
|
device_printf(adapter->dev, "\nCRITICAL: ECC ERROR!! "
|
|
"Please Reboot!!\n");
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_ECC);
|
|
} else if (reg_eicr & IXGBE_EICR_GPI_SDP1) {
|
|
/* Clear the interrupt */
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
|
|
taskqueue_enqueue(adapter->tq, &adapter->msf_task);
|
|
} else if (reg_eicr & IXGBE_EICR_GPI_SDP2) {
|
|
/* Clear the interrupt */
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP2);
|
|
taskqueue_enqueue(adapter->tq, &adapter->mod_task);
|
|
}
|
|
}
|
|
|
|
/* Check for fan failure */
|
|
if ((hw->device_id == IXGBE_DEV_ID_82598AT) &&
|
|
(reg_eicr & IXGBE_EICR_GPI_SDP1)) {
|
|
device_printf(adapter->dev, "\nCRITICAL: FAN FAILURE!! "
|
|
"REPLACE IMMEDIATELY!!\n");
|
|
IXGBE_WRITE_REG(hw, IXGBE_EICR, IXGBE_EICR_GPI_SDP1);
|
|
}
|
|
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMS, IXGBE_EIMS_OTHER);
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** Routine to do adjust the RX EITR value based on traffic,
|
|
** its a simple three state model, but seems to help.
|
|
**
|
|
** Note that the three EITR values are tuneable using
|
|
** sysctl in real time. The feature can be effectively
|
|
** nullified by setting them equal.
|
|
*/
|
|
#define BULK_THRESHOLD 10000
|
|
#define AVE_THRESHOLD 1600
|
|
|
|
static void
|
|
ixgbe_update_aim(struct rx_ring *rxr)
|
|
{
|
|
struct adapter *adapter = rxr->adapter;
|
|
u32 olditr, newitr;
|
|
|
|
/* Update interrupt moderation based on traffic */
|
|
olditr = rxr->eitr_setting;
|
|
newitr = olditr;
|
|
|
|
/* Idle, don't change setting */
|
|
if (rxr->bytes == 0)
|
|
return;
|
|
|
|
if (olditr == ixgbe_low_latency) {
|
|
if (rxr->bytes > AVE_THRESHOLD)
|
|
newitr = ixgbe_ave_latency;
|
|
} else if (olditr == ixgbe_ave_latency) {
|
|
if (rxr->bytes < AVE_THRESHOLD)
|
|
newitr = ixgbe_low_latency;
|
|
else if (rxr->bytes > BULK_THRESHOLD)
|
|
newitr = ixgbe_bulk_latency;
|
|
} else if (olditr == ixgbe_bulk_latency) {
|
|
if (rxr->bytes < BULK_THRESHOLD)
|
|
newitr = ixgbe_ave_latency;
|
|
}
|
|
|
|
if (olditr != newitr) {
|
|
/* Change interrupt rate */
|
|
rxr->eitr_setting = newitr;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(rxr->me),
|
|
newitr | (newitr << 16));
|
|
}
|
|
|
|
rxr->bytes = 0;
|
|
return;
|
|
}
|
|
|
|
static void
|
|
ixgbe_init_moderation(struct adapter *adapter)
|
|
{
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
|
|
/* Single interrupt - MSI or Legacy? */
|
|
if (adapter->msix < 2) {
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EITR(0), 100);
|
|
return;
|
|
}
|
|
|
|
/* TX irq moderation rate is fixed */
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
IXGBE_WRITE_REG(&adapter->hw,
|
|
IXGBE_EITR(txr->msix), ixgbe_ave_latency);
|
|
txr->watchdog_timer = FALSE;
|
|
}
|
|
|
|
/* RX moderation will be adapted over time, set default */
|
|
for (int i = 0; i < adapter->num_queues; i++, rxr++) {
|
|
IXGBE_WRITE_REG(&adapter->hw,
|
|
IXGBE_EITR(rxr->msix), ixgbe_low_latency);
|
|
}
|
|
|
|
/* Set Link moderation */
|
|
IXGBE_WRITE_REG(&adapter->hw,
|
|
IXGBE_EITR(adapter->linkvec), IXGBE_LINK_ITR);
|
|
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Media Ioctl callback
|
|
*
|
|
* This routine is called whenever the user queries the status of
|
|
* the interface using ifconfig.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_media_status(struct ifnet * ifp, struct ifmediareq * ifmr)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
|
|
INIT_DEBUGOUT("ixgbe_media_status: begin");
|
|
IXGBE_CORE_LOCK(adapter);
|
|
ixgbe_update_link_status(adapter);
|
|
|
|
ifmr->ifm_status = IFM_AVALID;
|
|
ifmr->ifm_active = IFM_ETHER;
|
|
|
|
if (!adapter->link_active) {
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
return;
|
|
}
|
|
|
|
ifmr->ifm_status |= IFM_ACTIVE;
|
|
|
|
switch (adapter->link_speed) {
|
|
case IXGBE_LINK_SPEED_1GB_FULL:
|
|
ifmr->ifm_active |= IFM_1000_T | IFM_FDX;
|
|
break;
|
|
case IXGBE_LINK_SPEED_10GB_FULL:
|
|
ifmr->ifm_active |= adapter->optics | IFM_FDX;
|
|
break;
|
|
}
|
|
|
|
IXGBE_CORE_UNLOCK(adapter);
|
|
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Media Ioctl callback
|
|
*
|
|
* This routine is called when the user changes speed/duplex using
|
|
* media/mediopt option with ifconfig.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_media_change(struct ifnet * ifp)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
struct ifmedia *ifm = &adapter->media;
|
|
|
|
INIT_DEBUGOUT("ixgbe_media_change: begin");
|
|
|
|
if (IFM_TYPE(ifm->ifm_media) != IFM_ETHER)
|
|
return (EINVAL);
|
|
|
|
switch (IFM_SUBTYPE(ifm->ifm_media)) {
|
|
case IFM_AUTO:
|
|
adapter->hw.mac.autoneg = TRUE;
|
|
adapter->hw.phy.autoneg_advertised =
|
|
IXGBE_LINK_SPEED_1GB_FULL | IXGBE_LINK_SPEED_10GB_FULL;
|
|
break;
|
|
default:
|
|
device_printf(adapter->dev, "Only auto media type\n");
|
|
return (EINVAL);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* This routine maps the mbufs to tx descriptors.
|
|
* WARNING: while this code is using an MQ style infrastructure,
|
|
* it would NOT work as is with more than 1 queue.
|
|
*
|
|
* return 0 on success, positive on failure
|
|
**********************************************************************/
|
|
|
|
static int
|
|
ixgbe_xmit(struct tx_ring *txr, struct mbuf **m_headp)
|
|
{
|
|
struct adapter *adapter = txr->adapter;
|
|
u32 olinfo_status = 0, cmd_type_len;
|
|
u32 paylen = 0;
|
|
int i, j, error, nsegs;
|
|
int first, last = 0;
|
|
struct mbuf *m_head;
|
|
bus_dma_segment_t segs[ixgbe_num_segs];
|
|
bus_dmamap_t map;
|
|
struct ixgbe_tx_buf *txbuf, *txbuf_mapped;
|
|
union ixgbe_adv_tx_desc *txd = NULL;
|
|
|
|
m_head = *m_headp;
|
|
|
|
/* Basic descriptor defines */
|
|
cmd_type_len = (IXGBE_ADVTXD_DTYP_DATA |
|
|
IXGBE_ADVTXD_DCMD_IFCS | IXGBE_ADVTXD_DCMD_DEXT);
|
|
|
|
if (m_head->m_flags & M_VLANTAG)
|
|
cmd_type_len |= IXGBE_ADVTXD_DCMD_VLE;
|
|
|
|
/* Do a clean if descriptors are low */
|
|
if (txr->tx_avail <= IXGBE_TX_CLEANUP_THRESHOLD) {
|
|
ixgbe_txeof(txr);
|
|
/* Now do we at least have a minimal? */
|
|
if (txr->tx_avail <= IXGBE_TX_OP_THRESHOLD)
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
/*
|
|
* Important to capture the first descriptor
|
|
* used because it will contain the index of
|
|
* the one we tell the hardware to report back
|
|
*/
|
|
first = txr->next_avail_tx_desc;
|
|
txbuf = &txr->tx_buffers[first];
|
|
txbuf_mapped = txbuf;
|
|
map = txbuf->map;
|
|
|
|
/*
|
|
* Map the packet for DMA.
|
|
*/
|
|
error = bus_dmamap_load_mbuf_sg(txr->txtag, map,
|
|
*m_headp, segs, &nsegs, BUS_DMA_NOWAIT);
|
|
|
|
if (error == EFBIG) {
|
|
struct mbuf *m;
|
|
|
|
m = m_defrag(*m_headp, M_DONTWAIT);
|
|
if (m == NULL) {
|
|
adapter->mbuf_defrag_failed++;
|
|
m_freem(*m_headp);
|
|
*m_headp = NULL;
|
|
return (ENOBUFS);
|
|
}
|
|
*m_headp = m;
|
|
|
|
/* Try it again */
|
|
error = bus_dmamap_load_mbuf_sg(txr->txtag, map,
|
|
*m_headp, segs, &nsegs, BUS_DMA_NOWAIT);
|
|
|
|
if (error == ENOMEM) {
|
|
adapter->no_tx_dma_setup++;
|
|
return (error);
|
|
} else if (error != 0) {
|
|
adapter->no_tx_dma_setup++;
|
|
m_freem(*m_headp);
|
|
*m_headp = NULL;
|
|
return (error);
|
|
}
|
|
} else if (error == ENOMEM) {
|
|
adapter->no_tx_dma_setup++;
|
|
return (error);
|
|
} else if (error != 0) {
|
|
adapter->no_tx_dma_setup++;
|
|
m_freem(*m_headp);
|
|
*m_headp = NULL;
|
|
return (error);
|
|
}
|
|
|
|
/* Make certain there are enough descriptors */
|
|
if (nsegs > txr->tx_avail - 2) {
|
|
txr->no_tx_desc_avail++;
|
|
error = ENOBUFS;
|
|
goto xmit_fail;
|
|
}
|
|
m_head = *m_headp;
|
|
|
|
/*
|
|
** Set up the appropriate offload context
|
|
** this becomes the first descriptor of
|
|
** a packet.
|
|
*/
|
|
if (m_head->m_pkthdr.csum_flags & CSUM_TSO) {
|
|
if (ixgbe_tso_setup(txr, m_head, &paylen)) {
|
|
cmd_type_len |= IXGBE_ADVTXD_DCMD_TSE;
|
|
olinfo_status |= IXGBE_TXD_POPTS_IXSM << 8;
|
|
olinfo_status |= IXGBE_TXD_POPTS_TXSM << 8;
|
|
olinfo_status |= paylen << IXGBE_ADVTXD_PAYLEN_SHIFT;
|
|
++adapter->tso_tx;
|
|
} else
|
|
return (ENXIO);
|
|
} else if (ixgbe_tx_ctx_setup(txr, m_head))
|
|
olinfo_status |= IXGBE_TXD_POPTS_TXSM << 8;
|
|
|
|
#ifdef IXGBE_IEEE1588
|
|
/* This is changing soon to an mtag detection */
|
|
if (we detect this mbuf has a TSTAMP mtag)
|
|
cmd_type_len |= IXGBE_ADVTXD_MAC_TSTAMP;
|
|
#endif
|
|
|
|
/* Record payload length */
|
|
if (paylen == 0)
|
|
olinfo_status |= m_head->m_pkthdr.len <<
|
|
IXGBE_ADVTXD_PAYLEN_SHIFT;
|
|
|
|
i = txr->next_avail_tx_desc;
|
|
for (j = 0; j < nsegs; j++) {
|
|
bus_size_t seglen;
|
|
bus_addr_t segaddr;
|
|
|
|
txbuf = &txr->tx_buffers[i];
|
|
txd = &txr->tx_base[i];
|
|
seglen = segs[j].ds_len;
|
|
segaddr = htole64(segs[j].ds_addr);
|
|
|
|
txd->read.buffer_addr = segaddr;
|
|
txd->read.cmd_type_len = htole32(txr->txd_cmd |
|
|
cmd_type_len |seglen);
|
|
txd->read.olinfo_status = htole32(olinfo_status);
|
|
last = i; /* Next descriptor that will get completed */
|
|
|
|
if (++i == adapter->num_tx_desc)
|
|
i = 0;
|
|
|
|
txbuf->m_head = NULL;
|
|
txbuf->eop_index = -1;
|
|
}
|
|
|
|
txd->read.cmd_type_len |=
|
|
htole32(IXGBE_TXD_CMD_EOP | IXGBE_TXD_CMD_RS);
|
|
txr->tx_avail -= nsegs;
|
|
txr->next_avail_tx_desc = i;
|
|
|
|
txbuf->m_head = m_head;
|
|
txbuf->map = map;
|
|
bus_dmamap_sync(txr->txtag, map, BUS_DMASYNC_PREWRITE);
|
|
|
|
/* Set the index of the descriptor that will be marked done */
|
|
txbuf = &txr->tx_buffers[first];
|
|
txbuf->eop_index = last;
|
|
|
|
bus_dmamap_sync(txr->txdma.dma_tag, txr->txdma.dma_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
/*
|
|
* Advance the Transmit Descriptor Tail (Tdt), this tells the
|
|
* hardware that this frame is available to transmit.
|
|
*/
|
|
++txr->total_packets;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_TDT(txr->me), i);
|
|
return (0);
|
|
|
|
xmit_fail:
|
|
bus_dmamap_unload(txr->txtag, txbuf->map);
|
|
return (error);
|
|
|
|
}
|
|
|
|
static void
|
|
ixgbe_set_promisc(struct adapter *adapter)
|
|
{
|
|
|
|
u_int32_t reg_rctl;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
|
|
reg_rctl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL);
|
|
|
|
if (ifp->if_flags & IFF_PROMISC) {
|
|
reg_rctl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, reg_rctl);
|
|
} else if (ifp->if_flags & IFF_ALLMULTI) {
|
|
reg_rctl |= IXGBE_FCTRL_MPE;
|
|
reg_rctl &= ~IXGBE_FCTRL_UPE;
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, reg_rctl);
|
|
}
|
|
return;
|
|
}
|
|
|
|
static void
|
|
ixgbe_disable_promisc(struct adapter * adapter)
|
|
{
|
|
u_int32_t reg_rctl;
|
|
|
|
reg_rctl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL);
|
|
|
|
reg_rctl &= (~IXGBE_FCTRL_UPE);
|
|
reg_rctl &= (~IXGBE_FCTRL_MPE);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, reg_rctl);
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
* Multicast Update
|
|
*
|
|
* This routine is called whenever multicast address list is updated.
|
|
*
|
|
**********************************************************************/
|
|
#define IXGBE_RAR_ENTRIES 16
|
|
|
|
static void
|
|
ixgbe_set_multi(struct adapter *adapter)
|
|
{
|
|
u32 fctrl;
|
|
u8 mta[MAX_NUM_MULTICAST_ADDRESSES * IXGBE_ETH_LENGTH_OF_ADDRESS];
|
|
u8 *update_ptr;
|
|
struct ifmultiaddr *ifma;
|
|
int mcnt = 0;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
|
|
IOCTL_DEBUGOUT("ixgbe_set_multi: begin");
|
|
|
|
fctrl = IXGBE_READ_REG(&adapter->hw, IXGBE_FCTRL);
|
|
fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
|
|
if (ifp->if_flags & IFF_PROMISC)
|
|
fctrl |= (IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
|
|
else if (ifp->if_flags & IFF_ALLMULTI) {
|
|
fctrl |= IXGBE_FCTRL_MPE;
|
|
fctrl &= ~IXGBE_FCTRL_UPE;
|
|
} else
|
|
fctrl &= ~(IXGBE_FCTRL_UPE | IXGBE_FCTRL_MPE);
|
|
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_FCTRL, fctrl);
|
|
|
|
#if __FreeBSD_version < 800000
|
|
IF_ADDR_LOCK(ifp);
|
|
#else
|
|
if_maddr_rlock(ifp);
|
|
#endif
|
|
TAILQ_FOREACH(ifma, &ifp->if_multiaddrs, ifma_link) {
|
|
if (ifma->ifma_addr->sa_family != AF_LINK)
|
|
continue;
|
|
bcopy(LLADDR((struct sockaddr_dl *) ifma->ifma_addr),
|
|
&mta[mcnt * IXGBE_ETH_LENGTH_OF_ADDRESS],
|
|
IXGBE_ETH_LENGTH_OF_ADDRESS);
|
|
mcnt++;
|
|
}
|
|
#if __FreeBSD_version < 800000
|
|
IF_ADDR_UNLOCK(ifp);
|
|
#else
|
|
if_maddr_runlock(ifp);
|
|
#endif
|
|
|
|
update_ptr = mta;
|
|
ixgbe_update_mc_addr_list(&adapter->hw,
|
|
update_ptr, mcnt, ixgbe_mc_array_itr);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
* This is an iterator function now needed by the multicast
|
|
* shared code. It simply feeds the shared code routine the
|
|
* addresses in the array of ixgbe_set_multi() one by one.
|
|
*/
|
|
static u8 *
|
|
ixgbe_mc_array_itr(struct ixgbe_hw *hw, u8 **update_ptr, u32 *vmdq)
|
|
{
|
|
u8 *addr = *update_ptr;
|
|
u8 *newptr;
|
|
*vmdq = 0;
|
|
|
|
newptr = addr + IXGBE_ETH_LENGTH_OF_ADDRESS;
|
|
*update_ptr = newptr;
|
|
return addr;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
* Timer routine
|
|
*
|
|
* This routine checks for link status,updates statistics,
|
|
* and runs the watchdog timer.
|
|
*
|
|
**********************************************************************/
|
|
|
|
static void
|
|
ixgbe_local_timer(void *arg)
|
|
{
|
|
struct adapter *adapter = arg;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
|
|
mtx_assert(&adapter->core_mtx, MA_OWNED);
|
|
|
|
/* Check for pluggable optics */
|
|
if (adapter->sfp_probe)
|
|
if (!ixgbe_sfp_probe(adapter))
|
|
goto out; /* Nothing to do */
|
|
|
|
ixgbe_update_link_status(adapter);
|
|
ixgbe_update_stats_counters(adapter);
|
|
if (ixgbe_display_debug_stats && ifp->if_drv_flags & IFF_DRV_RUNNING) {
|
|
ixgbe_print_hw_stats(adapter);
|
|
}
|
|
/*
|
|
* Each tick we check the watchdog
|
|
* to protect against hardware hangs.
|
|
*/
|
|
ixgbe_watchdog(adapter);
|
|
|
|
out:
|
|
/* Trigger an RX interrupt on all queues */
|
|
ixgbe_rearm_rx_queues(adapter, adapter->rx_mask);
|
|
|
|
callout_reset(&adapter->timer, hz, ixgbe_local_timer, adapter);
|
|
}
|
|
|
|
/*
|
|
** Note: this routine updates the OS on the link state
|
|
** the real check of the hardware only happens with
|
|
** a link interrupt.
|
|
*/
|
|
static void
|
|
ixgbe_update_link_status(struct adapter *adapter)
|
|
{
|
|
struct ifnet *ifp = adapter->ifp;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
device_t dev = adapter->dev;
|
|
|
|
|
|
if (adapter->link_up){
|
|
if (adapter->link_active == FALSE) {
|
|
if (bootverbose)
|
|
device_printf(dev,"Link is up %d Gbps %s \n",
|
|
((adapter->link_speed == 128)? 10:1),
|
|
"Full Duplex");
|
|
adapter->link_active = TRUE;
|
|
if_link_state_change(ifp, LINK_STATE_UP);
|
|
}
|
|
} else { /* Link down */
|
|
if (adapter->link_active == TRUE) {
|
|
if (bootverbose)
|
|
device_printf(dev,"Link is Down\n");
|
|
if_link_state_change(ifp, LINK_STATE_DOWN);
|
|
adapter->link_active = FALSE;
|
|
for (int i = 0; i < adapter->num_queues;
|
|
i++, txr++)
|
|
txr->watchdog_timer = FALSE;
|
|
}
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* This routine disables all traffic on the adapter by issuing a
|
|
* global reset on the MAC and deallocates TX/RX buffers.
|
|
*
|
|
**********************************************************************/
|
|
|
|
static void
|
|
ixgbe_stop(void *arg)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct adapter *adapter = arg;
|
|
ifp = adapter->ifp;
|
|
|
|
mtx_assert(&adapter->core_mtx, MA_OWNED);
|
|
|
|
INIT_DEBUGOUT("ixgbe_stop: begin\n");
|
|
ixgbe_disable_intr(adapter);
|
|
|
|
/* Tell the stack that the interface is no longer active */
|
|
ifp->if_drv_flags &= ~(IFF_DRV_RUNNING | IFF_DRV_OACTIVE);
|
|
|
|
ixgbe_reset_hw(&adapter->hw);
|
|
adapter->hw.adapter_stopped = FALSE;
|
|
ixgbe_stop_adapter(&adapter->hw);
|
|
callout_stop(&adapter->timer);
|
|
|
|
/* reprogram the RAR[0] in case user changed it. */
|
|
ixgbe_set_rar(&adapter->hw, 0, adapter->hw.mac.addr, 0, IXGBE_RAH_AV);
|
|
|
|
return;
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Determine hardware revision.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_identify_hardware(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
|
|
/* Save off the information about this board */
|
|
adapter->hw.vendor_id = pci_get_vendor(dev);
|
|
adapter->hw.device_id = pci_get_device(dev);
|
|
adapter->hw.revision_id = pci_read_config(dev, PCIR_REVID, 1);
|
|
adapter->hw.subsystem_vendor_id =
|
|
pci_read_config(dev, PCIR_SUBVEND_0, 2);
|
|
adapter->hw.subsystem_device_id =
|
|
pci_read_config(dev, PCIR_SUBDEV_0, 2);
|
|
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Setup the Legacy or MSI Interrupt handler
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_allocate_legacy(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
int error, rid = 0;
|
|
|
|
/* MSI RID at 1 */
|
|
if (adapter->msix == 1)
|
|
rid = 1;
|
|
|
|
/* We allocate a single interrupt resource */
|
|
adapter->res = bus_alloc_resource_any(dev,
|
|
SYS_RES_IRQ, &rid, RF_SHAREABLE | RF_ACTIVE);
|
|
if (adapter->res == NULL) {
|
|
device_printf(dev, "Unable to allocate bus resource: "
|
|
"interrupt\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
/*
|
|
* Try allocating a fast interrupt and the associated deferred
|
|
* processing contexts.
|
|
*/
|
|
TASK_INIT(&txr->tx_task, 0, ixgbe_handle_tx, txr);
|
|
TASK_INIT(&rxr->rx_task, 0, ixgbe_handle_rx, rxr);
|
|
txr->tq = taskqueue_create_fast("ixgbe_txq", M_NOWAIT,
|
|
taskqueue_thread_enqueue, &txr->tq);
|
|
rxr->tq = taskqueue_create_fast("ixgbe_rxq", M_NOWAIT,
|
|
taskqueue_thread_enqueue, &rxr->tq);
|
|
taskqueue_start_threads(&txr->tq, 1, PI_NET, "%s txq",
|
|
device_get_nameunit(adapter->dev));
|
|
taskqueue_start_threads(&rxr->tq, 1, PI_NET, "%s rxq",
|
|
device_get_nameunit(adapter->dev));
|
|
|
|
/* Tasklets for Link, SFP and Multispeed Fiber */
|
|
TASK_INIT(&adapter->link_task, 0, ixgbe_handle_link, adapter);
|
|
TASK_INIT(&adapter->mod_task, 0, ixgbe_handle_mod, adapter);
|
|
TASK_INIT(&adapter->msf_task, 0, ixgbe_handle_msf, adapter);
|
|
adapter->tq = taskqueue_create_fast("ixgbe_link", M_NOWAIT,
|
|
taskqueue_thread_enqueue, &adapter->tq);
|
|
taskqueue_start_threads(&adapter->tq, 1, PI_NET, "%s linkq",
|
|
device_get_nameunit(adapter->dev));
|
|
|
|
if ((error = bus_setup_intr(dev, adapter->res,
|
|
INTR_TYPE_NET | INTR_MPSAFE, NULL, ixgbe_legacy_irq,
|
|
adapter, &adapter->tag)) != 0) {
|
|
device_printf(dev, "Failed to register fast interrupt "
|
|
"handler: %d\n", error);
|
|
taskqueue_free(txr->tq);
|
|
taskqueue_free(rxr->tq);
|
|
txr->tq = NULL;
|
|
rxr->tq = NULL;
|
|
return (error);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Setup MSIX Interrupt resources and handlers
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_allocate_msix(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
int error, rid, vector = 0;
|
|
|
|
/* TX setup: the code is here for multi tx,
|
|
there are other parts of the driver not ready for it */
|
|
for (int i = 0; i < adapter->num_queues; i++, vector++, txr++) {
|
|
rid = vector + 1;
|
|
txr->res = bus_alloc_resource_any(dev, SYS_RES_IRQ, &rid,
|
|
RF_SHAREABLE | RF_ACTIVE);
|
|
if (!txr->res) {
|
|
device_printf(dev,"Unable to allocate"
|
|
" bus resource: tx interrupt [%d]\n", vector);
|
|
return (ENXIO);
|
|
}
|
|
/* Set the handler function */
|
|
error = bus_setup_intr(dev, txr->res,
|
|
INTR_TYPE_NET | INTR_MPSAFE, NULL,
|
|
ixgbe_msix_tx, txr, &txr->tag);
|
|
if (error) {
|
|
txr->res = NULL;
|
|
device_printf(dev, "Failed to register TX handler");
|
|
return (error);
|
|
}
|
|
txr->msix = vector;
|
|
/*
|
|
** Bind the msix vector, and thus the
|
|
** ring to the corresponding cpu.
|
|
*/
|
|
if (adapter->num_queues > 1)
|
|
bus_bind_intr(dev, txr->res, i);
|
|
|
|
TASK_INIT(&txr->tx_task, 0, ixgbe_handle_tx, txr);
|
|
txr->tq = taskqueue_create_fast("ixgbe_txq", M_NOWAIT,
|
|
taskqueue_thread_enqueue, &txr->tq);
|
|
taskqueue_start_threads(&txr->tq, 1, PI_NET, "%s txq",
|
|
device_get_nameunit(adapter->dev));
|
|
}
|
|
|
|
/* RX setup */
|
|
for (int i = 0; i < adapter->num_queues; i++, vector++, rxr++) {
|
|
rid = vector + 1;
|
|
rxr->res = bus_alloc_resource_any(dev,
|
|
SYS_RES_IRQ, &rid, RF_SHAREABLE | RF_ACTIVE);
|
|
if (!rxr->res) {
|
|
device_printf(dev,"Unable to allocate"
|
|
" bus resource: rx interrupt [%d],"
|
|
"rid = %d\n", i, rid);
|
|
return (ENXIO);
|
|
}
|
|
/* Set the handler function */
|
|
error = bus_setup_intr(dev, rxr->res,
|
|
INTR_TYPE_NET | INTR_MPSAFE, NULL,
|
|
ixgbe_msix_rx, rxr, &rxr->tag);
|
|
if (error) {
|
|
rxr->res = NULL;
|
|
device_printf(dev, "Failed to register RX handler");
|
|
return (error);
|
|
}
|
|
rxr->msix = vector;
|
|
/* used in local timer */
|
|
adapter->rx_mask |= (u64)(1 << vector);
|
|
/*
|
|
** Bind the msix vector, and thus the
|
|
** ring to the corresponding cpu.
|
|
*/
|
|
if (adapter->num_queues > 1)
|
|
bus_bind_intr(dev, rxr->res, i);
|
|
|
|
TASK_INIT(&rxr->rx_task, 0, ixgbe_handle_rx, rxr);
|
|
rxr->tq = taskqueue_create_fast("ixgbe_rxq", M_NOWAIT,
|
|
taskqueue_thread_enqueue, &rxr->tq);
|
|
taskqueue_start_threads(&rxr->tq, 1, PI_NET, "%s rxq",
|
|
device_get_nameunit(adapter->dev));
|
|
}
|
|
|
|
/* Now for Link changes */
|
|
rid = vector + 1;
|
|
adapter->res = bus_alloc_resource_any(dev,
|
|
SYS_RES_IRQ, &rid, RF_SHAREABLE | RF_ACTIVE);
|
|
if (!adapter->res) {
|
|
device_printf(dev,"Unable to allocate"
|
|
" bus resource: Link interrupt [%d]\n", rid);
|
|
return (ENXIO);
|
|
}
|
|
/* Set the link handler function */
|
|
error = bus_setup_intr(dev, adapter->res,
|
|
INTR_TYPE_NET | INTR_MPSAFE, NULL,
|
|
ixgbe_msix_link, adapter, &adapter->tag);
|
|
if (error) {
|
|
adapter->res = NULL;
|
|
device_printf(dev, "Failed to register LINK handler");
|
|
return (error);
|
|
}
|
|
adapter->linkvec = vector;
|
|
/* Tasklets for Link, SFP and Multispeed Fiber */
|
|
TASK_INIT(&adapter->link_task, 0, ixgbe_handle_link, adapter);
|
|
TASK_INIT(&adapter->mod_task, 0, ixgbe_handle_mod, adapter);
|
|
TASK_INIT(&adapter->msf_task, 0, ixgbe_handle_msf, adapter);
|
|
adapter->tq = taskqueue_create_fast("ixgbe_link", M_NOWAIT,
|
|
taskqueue_thread_enqueue, &adapter->tq);
|
|
taskqueue_start_threads(&adapter->tq, 1, PI_NET, "%s linkq",
|
|
device_get_nameunit(adapter->dev));
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*
|
|
* Setup Either MSI/X or MSI
|
|
*/
|
|
static int
|
|
ixgbe_setup_msix(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
int rid, want, queues, msgs;
|
|
|
|
/* Override by tuneable */
|
|
if (ixgbe_enable_msix == 0)
|
|
goto msi;
|
|
|
|
/* First try MSI/X */
|
|
rid = PCIR_BAR(MSIX_82598_BAR);
|
|
adapter->msix_mem = bus_alloc_resource_any(dev,
|
|
SYS_RES_MEMORY, &rid, RF_ACTIVE);
|
|
if (!adapter->msix_mem) {
|
|
rid += 4; /* 82599 maps in higher BAR */
|
|
adapter->msix_mem = bus_alloc_resource_any(dev,
|
|
SYS_RES_MEMORY, &rid, RF_ACTIVE);
|
|
}
|
|
if (!adapter->msix_mem) {
|
|
/* May not be enabled */
|
|
device_printf(adapter->dev,
|
|
"Unable to map MSIX table \n");
|
|
goto msi;
|
|
}
|
|
|
|
msgs = pci_msix_count(dev);
|
|
if (msgs == 0) { /* system has msix disabled */
|
|
bus_release_resource(dev, SYS_RES_MEMORY,
|
|
rid, adapter->msix_mem);
|
|
adapter->msix_mem = NULL;
|
|
goto msi;
|
|
}
|
|
|
|
/* Figure out a reasonable auto config value */
|
|
queues = (mp_ncpus > ((msgs-1)/2)) ? (msgs-1)/2 : mp_ncpus;
|
|
|
|
if (ixgbe_num_queues == 0)
|
|
ixgbe_num_queues = queues;
|
|
/*
|
|
** Want two vectors (RX/TX) per queue
|
|
** plus an additional for Link.
|
|
*/
|
|
want = (ixgbe_num_queues * 2) + 1;
|
|
if (msgs >= want)
|
|
msgs = want;
|
|
else {
|
|
device_printf(adapter->dev,
|
|
"MSIX Configuration Problem, "
|
|
"%d vectors but %d queues wanted!\n",
|
|
msgs, want);
|
|
return (0); /* Will go to Legacy setup */
|
|
}
|
|
if ((msgs) && pci_alloc_msix(dev, &msgs) == 0) {
|
|
device_printf(adapter->dev,
|
|
"Using MSIX interrupts with %d vectors\n", msgs);
|
|
adapter->num_queues = ixgbe_num_queues;
|
|
return (msgs);
|
|
}
|
|
msi:
|
|
msgs = pci_msi_count(dev);
|
|
if (msgs == 1 && pci_alloc_msi(dev, &msgs) == 0)
|
|
device_printf(adapter->dev,"Using MSI interrupt\n");
|
|
return (msgs);
|
|
}
|
|
|
|
|
|
static int
|
|
ixgbe_allocate_pci_resources(struct adapter *adapter)
|
|
{
|
|
int rid;
|
|
device_t dev = adapter->dev;
|
|
|
|
rid = PCIR_BAR(0);
|
|
adapter->pci_mem = bus_alloc_resource_any(dev, SYS_RES_MEMORY,
|
|
&rid, RF_ACTIVE);
|
|
|
|
if (!(adapter->pci_mem)) {
|
|
device_printf(dev,"Unable to allocate bus resource: memory\n");
|
|
return (ENXIO);
|
|
}
|
|
|
|
adapter->osdep.mem_bus_space_tag =
|
|
rman_get_bustag(adapter->pci_mem);
|
|
adapter->osdep.mem_bus_space_handle =
|
|
rman_get_bushandle(adapter->pci_mem);
|
|
adapter->hw.hw_addr = (u8 *) &adapter->osdep.mem_bus_space_handle;
|
|
|
|
/* Legacy defaults */
|
|
adapter->num_queues = 1;
|
|
adapter->hw.back = &adapter->osdep;
|
|
|
|
/*
|
|
** Now setup MSI or MSI/X, should
|
|
** return us the number of supported
|
|
** vectors. (Will be 1 for MSI)
|
|
*/
|
|
adapter->msix = ixgbe_setup_msix(adapter);
|
|
return (0);
|
|
}
|
|
|
|
static void
|
|
ixgbe_free_pci_resources(struct adapter * adapter)
|
|
{
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
device_t dev = adapter->dev;
|
|
int rid, memrid;
|
|
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB)
|
|
memrid = PCIR_BAR(MSIX_82598_BAR);
|
|
else
|
|
memrid = PCIR_BAR(MSIX_82599_BAR);
|
|
|
|
/*
|
|
** There is a slight possibility of a failure mode
|
|
** in attach that will result in entering this function
|
|
** before interrupt resources have been initialized, and
|
|
** in that case we do not want to execute the loops below
|
|
** We can detect this reliably by the state of the adapter
|
|
** res pointer.
|
|
*/
|
|
if (adapter->res == NULL)
|
|
goto mem;
|
|
|
|
/*
|
|
** Release all the interrupt resources:
|
|
** notice this is harmless for Legacy or
|
|
** MSI since pointers will always be NULL
|
|
*/
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
rid = txr->msix + 1;
|
|
if (txr->tag != NULL) {
|
|
bus_teardown_intr(dev, txr->res, txr->tag);
|
|
txr->tag = NULL;
|
|
}
|
|
if (txr->res != NULL)
|
|
bus_release_resource(dev, SYS_RES_IRQ, rid, txr->res);
|
|
}
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, rxr++) {
|
|
rid = rxr->msix + 1;
|
|
if (rxr->tag != NULL) {
|
|
bus_teardown_intr(dev, rxr->res, rxr->tag);
|
|
rxr->tag = NULL;
|
|
}
|
|
if (rxr->res != NULL)
|
|
bus_release_resource(dev, SYS_RES_IRQ, rid, rxr->res);
|
|
}
|
|
|
|
/* Clean the Legacy or Link interrupt last */
|
|
if (adapter->linkvec) /* we are doing MSIX */
|
|
rid = adapter->linkvec + 1;
|
|
else
|
|
(adapter->msix != 0) ? (rid = 1):(rid = 0);
|
|
|
|
if (adapter->tag != NULL) {
|
|
bus_teardown_intr(dev, adapter->res, adapter->tag);
|
|
adapter->tag = NULL;
|
|
}
|
|
if (adapter->res != NULL)
|
|
bus_release_resource(dev, SYS_RES_IRQ, rid, adapter->res);
|
|
mem:
|
|
if (adapter->msix)
|
|
pci_release_msi(dev);
|
|
|
|
if (adapter->msix_mem != NULL)
|
|
bus_release_resource(dev, SYS_RES_MEMORY,
|
|
memrid, adapter->msix_mem);
|
|
|
|
if (adapter->pci_mem != NULL)
|
|
bus_release_resource(dev, SYS_RES_MEMORY,
|
|
PCIR_BAR(0), adapter->pci_mem);
|
|
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Initialize the hardware to a configuration as specified by the
|
|
* adapter structure. The controller is reset, the EEPROM is
|
|
* verified, the MAC address is set, then the shared initialization
|
|
* routines are called.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_hardware_init(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
u32 ret;
|
|
u16 csum;
|
|
|
|
csum = 0;
|
|
/* Issue a global reset */
|
|
adapter->hw.adapter_stopped = FALSE;
|
|
ixgbe_stop_adapter(&adapter->hw);
|
|
|
|
/* Make sure we have a good EEPROM before we read from it */
|
|
if (ixgbe_validate_eeprom_checksum(&adapter->hw, &csum) < 0) {
|
|
device_printf(dev,"The EEPROM Checksum Is Not Valid\n");
|
|
return (EIO);
|
|
}
|
|
|
|
/* Get Hardware Flow Control setting */
|
|
adapter->hw.fc.requested_mode = ixgbe_fc_full;
|
|
adapter->hw.fc.pause_time = IXGBE_FC_PAUSE;
|
|
adapter->hw.fc.low_water = IXGBE_FC_LO;
|
|
adapter->hw.fc.high_water = IXGBE_FC_HI;
|
|
adapter->hw.fc.send_xon = TRUE;
|
|
|
|
ret = ixgbe_init_hw(&adapter->hw);
|
|
if (ret == IXGBE_ERR_EEPROM_VERSION) {
|
|
device_printf(dev, "This device is a pre-production adapter/"
|
|
"LOM. Please be aware there may be issues associated "
|
|
"with your hardware.\n If you are experiencing problems "
|
|
"please contact your Intel or hardware representative "
|
|
"who provided you with this hardware.\n");
|
|
} else if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
device_printf(dev,"Unsupported SFP+ Module\n");
|
|
return (EIO);
|
|
} else if (ret != 0 ) {
|
|
device_printf(dev,"Hardware Initialization Failure\n");
|
|
return (EIO);
|
|
}
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Setup networking device structure and register an interface.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_setup_interface(device_t dev, struct adapter *adapter)
|
|
{
|
|
struct ifnet *ifp;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
INIT_DEBUGOUT("ixgbe_setup_interface: begin");
|
|
|
|
ifp = adapter->ifp = if_alloc(IFT_ETHER);
|
|
if (ifp == NULL)
|
|
panic("%s: can not if_alloc()\n", device_get_nameunit(dev));
|
|
if_initname(ifp, device_get_name(dev), device_get_unit(dev));
|
|
ifp->if_mtu = ETHERMTU;
|
|
ifp->if_baudrate = 1000000000;
|
|
ifp->if_init = ixgbe_init;
|
|
ifp->if_softc = adapter;
|
|
ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX | IFF_MULTICAST;
|
|
ifp->if_ioctl = ixgbe_ioctl;
|
|
ifp->if_start = ixgbe_start;
|
|
#if __FreeBSD_version >= 800000
|
|
ifp->if_transmit = ixgbe_mq_start;
|
|
ifp->if_qflush = ixgbe_qflush;
|
|
#endif
|
|
ifp->if_timer = 0;
|
|
ifp->if_watchdog = NULL;
|
|
ifp->if_snd.ifq_maxlen = adapter->num_tx_desc - 2;
|
|
|
|
ether_ifattach(ifp, adapter->hw.mac.addr);
|
|
|
|
adapter->max_frame_size =
|
|
ifp->if_mtu + ETHER_HDR_LEN + ETHER_CRC_LEN;
|
|
|
|
/*
|
|
* Tell the upper layer(s) we support long frames.
|
|
*/
|
|
ifp->if_data.ifi_hdrlen = sizeof(struct ether_vlan_header);
|
|
|
|
ifp->if_capabilities |= IFCAP_HWCSUM | IFCAP_TSO4 | IFCAP_VLAN_HWCSUM;
|
|
ifp->if_capabilities |= IFCAP_VLAN_HWTAGGING | IFCAP_VLAN_MTU;
|
|
ifp->if_capabilities |= IFCAP_JUMBO_MTU | IFCAP_LRO;
|
|
|
|
ifp->if_capenable = ifp->if_capabilities;
|
|
|
|
if (hw->device_id == IXGBE_DEV_ID_82598AT)
|
|
ixgbe_setup_link_speed(hw, (IXGBE_LINK_SPEED_10GB_FULL |
|
|
IXGBE_LINK_SPEED_1GB_FULL), TRUE, TRUE);
|
|
else
|
|
ixgbe_setup_link_speed(hw, IXGBE_LINK_SPEED_10GB_FULL,
|
|
TRUE, FALSE);
|
|
|
|
/*
|
|
* Specify the media types supported by this adapter and register
|
|
* callbacks to update media and link information
|
|
*/
|
|
ifmedia_init(&adapter->media, IFM_IMASK, ixgbe_media_change,
|
|
ixgbe_media_status);
|
|
ifmedia_add(&adapter->media, IFM_ETHER | adapter->optics |
|
|
IFM_FDX, 0, NULL);
|
|
if (hw->device_id == IXGBE_DEV_ID_82598AT) {
|
|
ifmedia_add(&adapter->media,
|
|
IFM_ETHER | IFM_1000_T | IFM_FDX, 0, NULL);
|
|
ifmedia_add(&adapter->media,
|
|
IFM_ETHER | IFM_1000_T, 0, NULL);
|
|
}
|
|
ifmedia_add(&adapter->media, IFM_ETHER | IFM_AUTO, 0, NULL);
|
|
ifmedia_set(&adapter->media, IFM_ETHER | IFM_AUTO);
|
|
|
|
return;
|
|
}
|
|
|
|
/********************************************************************
|
|
* Manage DMA'able memory.
|
|
*******************************************************************/
|
|
static void
|
|
ixgbe_dmamap_cb(void *arg, bus_dma_segment_t * segs, int nseg, int error)
|
|
{
|
|
if (error)
|
|
return;
|
|
*(bus_addr_t *) arg = segs->ds_addr;
|
|
return;
|
|
}
|
|
|
|
static int
|
|
ixgbe_dma_malloc(struct adapter *adapter, bus_size_t size,
|
|
struct ixgbe_dma_alloc *dma, int mapflags)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
int r;
|
|
|
|
r = bus_dma_tag_create(NULL, /* parent */
|
|
1, 0, /* alignment, bounds */
|
|
BUS_SPACE_MAXADDR, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
size, /* maxsize */
|
|
1, /* nsegments */
|
|
size, /* maxsegsize */
|
|
BUS_DMA_ALLOCNOW, /* flags */
|
|
NULL, /* lockfunc */
|
|
NULL, /* lockfuncarg */
|
|
&dma->dma_tag);
|
|
if (r != 0) {
|
|
device_printf(dev,"ixgbe_dma_malloc: bus_dma_tag_create failed; "
|
|
"error %u\n", r);
|
|
goto fail_0;
|
|
}
|
|
r = bus_dmamem_alloc(dma->dma_tag, (void **)&dma->dma_vaddr,
|
|
BUS_DMA_NOWAIT, &dma->dma_map);
|
|
if (r != 0) {
|
|
device_printf(dev,"ixgbe_dma_malloc: bus_dmamem_alloc failed; "
|
|
"error %u\n", r);
|
|
goto fail_1;
|
|
}
|
|
r = bus_dmamap_load(dma->dma_tag, dma->dma_map, dma->dma_vaddr,
|
|
size,
|
|
ixgbe_dmamap_cb,
|
|
&dma->dma_paddr,
|
|
mapflags | BUS_DMA_NOWAIT);
|
|
if (r != 0) {
|
|
device_printf(dev,"ixgbe_dma_malloc: bus_dmamap_load failed; "
|
|
"error %u\n", r);
|
|
goto fail_2;
|
|
}
|
|
dma->dma_size = size;
|
|
return (0);
|
|
fail_2:
|
|
bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map);
|
|
fail_1:
|
|
bus_dma_tag_destroy(dma->dma_tag);
|
|
fail_0:
|
|
dma->dma_map = NULL;
|
|
dma->dma_tag = NULL;
|
|
return (r);
|
|
}
|
|
|
|
static void
|
|
ixgbe_dma_free(struct adapter *adapter, struct ixgbe_dma_alloc *dma)
|
|
{
|
|
bus_dmamap_sync(dma->dma_tag, dma->dma_map,
|
|
BUS_DMASYNC_POSTREAD | BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(dma->dma_tag, dma->dma_map);
|
|
bus_dmamem_free(dma->dma_tag, dma->dma_vaddr, dma->dma_map);
|
|
bus_dma_tag_destroy(dma->dma_tag);
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Allocate memory for the transmit and receive rings, and then
|
|
* the descriptors associated with each, called only once at attach.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_allocate_queues(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
struct tx_ring *txr;
|
|
struct rx_ring *rxr;
|
|
int rsize, tsize, error = IXGBE_SUCCESS;
|
|
int txconf = 0, rxconf = 0;
|
|
|
|
/* First allocate the TX ring struct memory */
|
|
if (!(adapter->tx_rings =
|
|
(struct tx_ring *) malloc(sizeof(struct tx_ring) *
|
|
adapter->num_queues, M_DEVBUF, M_NOWAIT | M_ZERO))) {
|
|
device_printf(dev, "Unable to allocate TX ring memory\n");
|
|
error = ENOMEM;
|
|
goto fail;
|
|
}
|
|
txr = adapter->tx_rings;
|
|
|
|
/* Next allocate the RX */
|
|
if (!(adapter->rx_rings =
|
|
(struct rx_ring *) malloc(sizeof(struct rx_ring) *
|
|
adapter->num_queues, M_DEVBUF, M_NOWAIT | M_ZERO))) {
|
|
device_printf(dev, "Unable to allocate RX ring memory\n");
|
|
error = ENOMEM;
|
|
goto rx_fail;
|
|
}
|
|
rxr = adapter->rx_rings;
|
|
|
|
/* For the ring itself */
|
|
tsize = roundup2(adapter->num_tx_desc *
|
|
sizeof(union ixgbe_adv_tx_desc), 4096);
|
|
|
|
/*
|
|
* Now set up the TX queues, txconf is needed to handle the
|
|
* possibility that things fail midcourse and we need to
|
|
* undo memory gracefully
|
|
*/
|
|
for (int i = 0; i < adapter->num_queues; i++, txconf++) {
|
|
/* Set up some basics */
|
|
txr = &adapter->tx_rings[i];
|
|
txr->adapter = adapter;
|
|
txr->me = i;
|
|
|
|
/* Initialize the TX side lock */
|
|
snprintf(txr->mtx_name, sizeof(txr->mtx_name), "%s:tx(%d)",
|
|
device_get_nameunit(dev), txr->me);
|
|
mtx_init(&txr->tx_mtx, txr->mtx_name, NULL, MTX_DEF);
|
|
|
|
if (ixgbe_dma_malloc(adapter, tsize,
|
|
&txr->txdma, BUS_DMA_NOWAIT)) {
|
|
device_printf(dev,
|
|
"Unable to allocate TX Descriptor memory\n");
|
|
error = ENOMEM;
|
|
goto err_tx_desc;
|
|
}
|
|
txr->tx_base = (union ixgbe_adv_tx_desc *)txr->txdma.dma_vaddr;
|
|
bzero((void *)txr->tx_base, tsize);
|
|
|
|
/* Now allocate transmit buffers for the ring */
|
|
if (ixgbe_allocate_transmit_buffers(txr)) {
|
|
device_printf(dev,
|
|
"Critical Failure setting up transmit buffers\n");
|
|
error = ENOMEM;
|
|
goto err_tx_desc;
|
|
}
|
|
#if __FreeBSD_version >= 800000
|
|
/* Allocate a buf ring */
|
|
txr->br = buf_ring_alloc(IXGBE_BR_SIZE, M_DEVBUF,
|
|
M_WAITOK, &txr->tx_mtx);
|
|
#endif
|
|
}
|
|
|
|
/*
|
|
* Next the RX queues...
|
|
*/
|
|
rsize = roundup2(adapter->num_rx_desc *
|
|
sizeof(union ixgbe_adv_rx_desc), 4096);
|
|
for (int i = 0; i < adapter->num_queues; i++, rxconf++) {
|
|
rxr = &adapter->rx_rings[i];
|
|
/* Set up some basics */
|
|
rxr->adapter = adapter;
|
|
rxr->me = i;
|
|
|
|
/* Initialize the RX side lock */
|
|
snprintf(rxr->mtx_name, sizeof(rxr->mtx_name), "%s:rx(%d)",
|
|
device_get_nameunit(dev), rxr->me);
|
|
mtx_init(&rxr->rx_mtx, rxr->mtx_name, NULL, MTX_DEF);
|
|
|
|
if (ixgbe_dma_malloc(adapter, rsize,
|
|
&rxr->rxdma, BUS_DMA_NOWAIT)) {
|
|
device_printf(dev,
|
|
"Unable to allocate RxDescriptor memory\n");
|
|
error = ENOMEM;
|
|
goto err_rx_desc;
|
|
}
|
|
rxr->rx_base = (union ixgbe_adv_rx_desc *)rxr->rxdma.dma_vaddr;
|
|
bzero((void *)rxr->rx_base, rsize);
|
|
|
|
/* Allocate receive buffers for the ring*/
|
|
if (ixgbe_allocate_receive_buffers(rxr)) {
|
|
device_printf(dev,
|
|
"Critical Failure setting up receive buffers\n");
|
|
error = ENOMEM;
|
|
goto err_rx_desc;
|
|
}
|
|
}
|
|
|
|
return (0);
|
|
|
|
err_rx_desc:
|
|
for (rxr = adapter->rx_rings; rxconf > 0; rxr++, rxconf--)
|
|
ixgbe_dma_free(adapter, &rxr->rxdma);
|
|
err_tx_desc:
|
|
for (txr = adapter->tx_rings; txconf > 0; txr++, txconf--)
|
|
ixgbe_dma_free(adapter, &txr->txdma);
|
|
free(adapter->rx_rings, M_DEVBUF);
|
|
rx_fail:
|
|
free(adapter->tx_rings, M_DEVBUF);
|
|
fail:
|
|
return (error);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Allocate memory for tx_buffer structures. The tx_buffer stores all
|
|
* the information needed to transmit a packet on the wire. This is
|
|
* called only once at attach, setup is done every reset.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_allocate_transmit_buffers(struct tx_ring *txr)
|
|
{
|
|
struct adapter *adapter = txr->adapter;
|
|
device_t dev = adapter->dev;
|
|
struct ixgbe_tx_buf *txbuf;
|
|
int error, i;
|
|
|
|
/*
|
|
* Setup DMA descriptor areas.
|
|
*/
|
|
if ((error = bus_dma_tag_create(NULL, /* parent */
|
|
1, 0, /* alignment, bounds */
|
|
BUS_SPACE_MAXADDR, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
IXGBE_TSO_SIZE, /* maxsize */
|
|
ixgbe_num_segs, /* nsegments */
|
|
PAGE_SIZE, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, /* lockfunc */
|
|
NULL, /* lockfuncarg */
|
|
&txr->txtag))) {
|
|
device_printf(dev,"Unable to allocate TX DMA tag\n");
|
|
goto fail;
|
|
}
|
|
|
|
if (!(txr->tx_buffers =
|
|
(struct ixgbe_tx_buf *) malloc(sizeof(struct ixgbe_tx_buf) *
|
|
adapter->num_tx_desc, M_DEVBUF, M_NOWAIT | M_ZERO))) {
|
|
device_printf(dev, "Unable to allocate tx_buffer memory\n");
|
|
error = ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
/* Create the descriptor buffer dma maps */
|
|
txbuf = txr->tx_buffers;
|
|
for (i = 0; i < adapter->num_tx_desc; i++, txbuf++) {
|
|
error = bus_dmamap_create(txr->txtag, 0, &txbuf->map);
|
|
if (error != 0) {
|
|
device_printf(dev, "Unable to create TX DMA map\n");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
fail:
|
|
/* We free all, it handles case where we are in the middle */
|
|
ixgbe_free_transmit_structures(adapter);
|
|
return (error);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Initialize a transmit ring.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_setup_transmit_ring(struct tx_ring *txr)
|
|
{
|
|
struct adapter *adapter = txr->adapter;
|
|
struct ixgbe_tx_buf *txbuf;
|
|
int i;
|
|
|
|
/* Clear the old ring contents */
|
|
bzero((void *)txr->tx_base,
|
|
(sizeof(union ixgbe_adv_tx_desc)) * adapter->num_tx_desc);
|
|
/* Reset indices */
|
|
txr->next_avail_tx_desc = 0;
|
|
txr->next_tx_to_clean = 0;
|
|
|
|
/* Free any existing tx buffers. */
|
|
txbuf = txr->tx_buffers;
|
|
for (i = 0; i < adapter->num_tx_desc; i++, txbuf++) {
|
|
if (txbuf->m_head != NULL) {
|
|
bus_dmamap_sync(txr->txtag, txbuf->map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(txr->txtag, txbuf->map);
|
|
m_freem(txbuf->m_head);
|
|
txbuf->m_head = NULL;
|
|
}
|
|
/* Clear the EOP index */
|
|
txbuf->eop_index = -1;
|
|
}
|
|
|
|
/* Set number of descriptors available */
|
|
txr->tx_avail = adapter->num_tx_desc;
|
|
|
|
bus_dmamap_sync(txr->txdma.dma_tag, txr->txdma.dma_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Initialize all transmit rings.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_setup_transmit_structures(struct adapter *adapter)
|
|
{
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++)
|
|
ixgbe_setup_transmit_ring(txr);
|
|
|
|
return (0);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Enable transmit unit.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_initialize_transmit_units(struct adapter *adapter)
|
|
{
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
/* Setup the Base and Length of the Tx Descriptor Ring */
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
u64 tdba = txr->txdma.dma_paddr;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDBAL(i),
|
|
(tdba & 0x00000000ffffffffULL));
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDBAH(i), (tdba >> 32));
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDLEN(i),
|
|
adapter->num_tx_desc * sizeof(struct ixgbe_legacy_tx_desc));
|
|
|
|
/* Setup the HW Tx Head and Tail descriptor pointers */
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDH(i), 0);
|
|
IXGBE_WRITE_REG(hw, IXGBE_TDT(i), 0);
|
|
|
|
/* Setup Transmit Descriptor Cmd Settings */
|
|
txr->txd_cmd = IXGBE_TXD_CMD_IFCS;
|
|
|
|
txr->watchdog_timer = 0;
|
|
}
|
|
|
|
if (hw->mac.type == ixgbe_mac_82599EB) {
|
|
u32 dmatxctl;
|
|
dmatxctl = IXGBE_READ_REG(hw, IXGBE_DMATXCTL);
|
|
dmatxctl |= IXGBE_DMATXCTL_TE;
|
|
IXGBE_WRITE_REG(hw, IXGBE_DMATXCTL, dmatxctl);
|
|
}
|
|
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Free all transmit rings.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_free_transmit_structures(struct adapter *adapter)
|
|
{
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
IXGBE_TX_LOCK(txr);
|
|
ixgbe_free_transmit_buffers(txr);
|
|
ixgbe_dma_free(adapter, &txr->txdma);
|
|
IXGBE_TX_UNLOCK(txr);
|
|
IXGBE_TX_LOCK_DESTROY(txr);
|
|
}
|
|
free(adapter->tx_rings, M_DEVBUF);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Free transmit ring related data structures.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_free_transmit_buffers(struct tx_ring *txr)
|
|
{
|
|
struct adapter *adapter = txr->adapter;
|
|
struct ixgbe_tx_buf *tx_buffer;
|
|
int i;
|
|
|
|
INIT_DEBUGOUT("free_transmit_ring: begin");
|
|
|
|
if (txr->tx_buffers == NULL)
|
|
return;
|
|
|
|
tx_buffer = txr->tx_buffers;
|
|
for (i = 0; i < adapter->num_tx_desc; i++, tx_buffer++) {
|
|
if (tx_buffer->m_head != NULL) {
|
|
bus_dmamap_sync(txr->txtag, tx_buffer->map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(txr->txtag,
|
|
tx_buffer->map);
|
|
m_freem(tx_buffer->m_head);
|
|
tx_buffer->m_head = NULL;
|
|
if (tx_buffer->map != NULL) {
|
|
bus_dmamap_destroy(txr->txtag,
|
|
tx_buffer->map);
|
|
tx_buffer->map = NULL;
|
|
}
|
|
} else if (tx_buffer->map != NULL) {
|
|
bus_dmamap_unload(txr->txtag,
|
|
tx_buffer->map);
|
|
bus_dmamap_destroy(txr->txtag,
|
|
tx_buffer->map);
|
|
tx_buffer->map = NULL;
|
|
}
|
|
}
|
|
#if __FreeBSD_version >= 800000
|
|
if (txr->br != NULL)
|
|
buf_ring_free(txr->br, M_DEVBUF);
|
|
#endif
|
|
if (txr->tx_buffers != NULL) {
|
|
free(txr->tx_buffers, M_DEVBUF);
|
|
txr->tx_buffers = NULL;
|
|
}
|
|
if (txr->txtag != NULL) {
|
|
bus_dma_tag_destroy(txr->txtag);
|
|
txr->txtag = NULL;
|
|
}
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Advanced Context Descriptor setup for VLAN or CSUM
|
|
*
|
|
**********************************************************************/
|
|
|
|
static boolean_t
|
|
ixgbe_tx_ctx_setup(struct tx_ring *txr, struct mbuf *mp)
|
|
{
|
|
struct adapter *adapter = txr->adapter;
|
|
struct ixgbe_adv_tx_context_desc *TXD;
|
|
struct ixgbe_tx_buf *tx_buffer;
|
|
u32 vlan_macip_lens = 0, type_tucmd_mlhl = 0;
|
|
struct ether_vlan_header *eh;
|
|
struct ip *ip;
|
|
struct ip6_hdr *ip6;
|
|
int ehdrlen, ip_hlen = 0;
|
|
u16 etype;
|
|
u8 ipproto = 0;
|
|
bool offload = TRUE;
|
|
int ctxd = txr->next_avail_tx_desc;
|
|
u16 vtag = 0;
|
|
|
|
|
|
if ((mp->m_pkthdr.csum_flags & CSUM_OFFLOAD) == 0)
|
|
offload = FALSE;
|
|
|
|
tx_buffer = &txr->tx_buffers[ctxd];
|
|
TXD = (struct ixgbe_adv_tx_context_desc *) &txr->tx_base[ctxd];
|
|
|
|
/*
|
|
** In advanced descriptors the vlan tag must
|
|
** be placed into the descriptor itself.
|
|
*/
|
|
if (mp->m_flags & M_VLANTAG) {
|
|
vtag = htole16(mp->m_pkthdr.ether_vtag);
|
|
vlan_macip_lens |= (vtag << IXGBE_ADVTXD_VLAN_SHIFT);
|
|
} else if (offload == FALSE)
|
|
return FALSE;
|
|
|
|
/*
|
|
* Determine where frame payload starts.
|
|
* Jump over vlan headers if already present,
|
|
* helpful for QinQ too.
|
|
*/
|
|
eh = mtod(mp, struct ether_vlan_header *);
|
|
if (eh->evl_encap_proto == htons(ETHERTYPE_VLAN)) {
|
|
etype = ntohs(eh->evl_proto);
|
|
ehdrlen = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN;
|
|
} else {
|
|
etype = ntohs(eh->evl_encap_proto);
|
|
ehdrlen = ETHER_HDR_LEN;
|
|
}
|
|
|
|
/* Set the ether header length */
|
|
vlan_macip_lens |= ehdrlen << IXGBE_ADVTXD_MACLEN_SHIFT;
|
|
|
|
switch (etype) {
|
|
case ETHERTYPE_IP:
|
|
ip = (struct ip *)(mp->m_data + ehdrlen);
|
|
ip_hlen = ip->ip_hl << 2;
|
|
if (mp->m_len < ehdrlen + ip_hlen)
|
|
return (FALSE);
|
|
ipproto = ip->ip_p;
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4;
|
|
break;
|
|
case ETHERTYPE_IPV6:
|
|
ip6 = (struct ip6_hdr *)(mp->m_data + ehdrlen);
|
|
ip_hlen = sizeof(struct ip6_hdr);
|
|
if (mp->m_len < ehdrlen + ip_hlen)
|
|
return (FALSE);
|
|
ipproto = ip6->ip6_nxt;
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV6;
|
|
break;
|
|
default:
|
|
offload = FALSE;
|
|
break;
|
|
}
|
|
|
|
vlan_macip_lens |= ip_hlen;
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_DCMD_DEXT | IXGBE_ADVTXD_DTYP_CTXT;
|
|
|
|
switch (ipproto) {
|
|
case IPPROTO_TCP:
|
|
if (mp->m_pkthdr.csum_flags & CSUM_TCP)
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_TCP;
|
|
break;
|
|
|
|
case IPPROTO_UDP:
|
|
if (mp->m_pkthdr.csum_flags & CSUM_UDP)
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_UDP;
|
|
break;
|
|
|
|
default:
|
|
offload = FALSE;
|
|
break;
|
|
}
|
|
|
|
/* Now copy bits into descriptor */
|
|
TXD->vlan_macip_lens |= htole32(vlan_macip_lens);
|
|
TXD->type_tucmd_mlhl |= htole32(type_tucmd_mlhl);
|
|
TXD->seqnum_seed = htole32(0);
|
|
TXD->mss_l4len_idx = htole32(0);
|
|
|
|
tx_buffer->m_head = NULL;
|
|
tx_buffer->eop_index = -1;
|
|
|
|
/* We've consumed the first desc, adjust counters */
|
|
if (++ctxd == adapter->num_tx_desc)
|
|
ctxd = 0;
|
|
txr->next_avail_tx_desc = ctxd;
|
|
--txr->tx_avail;
|
|
|
|
return (offload);
|
|
}
|
|
|
|
/**********************************************************************
|
|
*
|
|
* Setup work for hardware segmentation offload (TSO) on
|
|
* adapters using advanced tx descriptors
|
|
*
|
|
**********************************************************************/
|
|
static boolean_t
|
|
ixgbe_tso_setup(struct tx_ring *txr, struct mbuf *mp, u32 *paylen)
|
|
{
|
|
struct adapter *adapter = txr->adapter;
|
|
struct ixgbe_adv_tx_context_desc *TXD;
|
|
struct ixgbe_tx_buf *tx_buffer;
|
|
u32 vlan_macip_lens = 0, type_tucmd_mlhl = 0;
|
|
u32 mss_l4len_idx = 0;
|
|
u16 vtag = 0;
|
|
int ctxd, ehdrlen, hdrlen, ip_hlen, tcp_hlen;
|
|
struct ether_vlan_header *eh;
|
|
struct ip *ip;
|
|
struct tcphdr *th;
|
|
|
|
|
|
/*
|
|
* Determine where frame payload starts.
|
|
* Jump over vlan headers if already present
|
|
*/
|
|
eh = mtod(mp, struct ether_vlan_header *);
|
|
if (eh->evl_encap_proto == htons(ETHERTYPE_VLAN))
|
|
ehdrlen = ETHER_HDR_LEN + ETHER_VLAN_ENCAP_LEN;
|
|
else
|
|
ehdrlen = ETHER_HDR_LEN;
|
|
|
|
/* Ensure we have at least the IP+TCP header in the first mbuf. */
|
|
if (mp->m_len < ehdrlen + sizeof(struct ip) + sizeof(struct tcphdr))
|
|
return FALSE;
|
|
|
|
ctxd = txr->next_avail_tx_desc;
|
|
tx_buffer = &txr->tx_buffers[ctxd];
|
|
TXD = (struct ixgbe_adv_tx_context_desc *) &txr->tx_base[ctxd];
|
|
|
|
ip = (struct ip *)(mp->m_data + ehdrlen);
|
|
if (ip->ip_p != IPPROTO_TCP)
|
|
return FALSE; /* 0 */
|
|
ip->ip_sum = 0;
|
|
ip_hlen = ip->ip_hl << 2;
|
|
th = (struct tcphdr *)((caddr_t)ip + ip_hlen);
|
|
th->th_sum = in_pseudo(ip->ip_src.s_addr,
|
|
ip->ip_dst.s_addr, htons(IPPROTO_TCP));
|
|
tcp_hlen = th->th_off << 2;
|
|
hdrlen = ehdrlen + ip_hlen + tcp_hlen;
|
|
|
|
/* This is used in the transmit desc in encap */
|
|
*paylen = mp->m_pkthdr.len - hdrlen;
|
|
|
|
/* VLAN MACLEN IPLEN */
|
|
if (mp->m_flags & M_VLANTAG) {
|
|
vtag = htole16(mp->m_pkthdr.ether_vtag);
|
|
vlan_macip_lens |= (vtag << IXGBE_ADVTXD_VLAN_SHIFT);
|
|
}
|
|
|
|
vlan_macip_lens |= ehdrlen << IXGBE_ADVTXD_MACLEN_SHIFT;
|
|
vlan_macip_lens |= ip_hlen;
|
|
TXD->vlan_macip_lens |= htole32(vlan_macip_lens);
|
|
|
|
/* ADV DTYPE TUCMD */
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_DCMD_DEXT | IXGBE_ADVTXD_DTYP_CTXT;
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_L4T_TCP;
|
|
type_tucmd_mlhl |= IXGBE_ADVTXD_TUCMD_IPV4;
|
|
TXD->type_tucmd_mlhl |= htole32(type_tucmd_mlhl);
|
|
|
|
|
|
/* MSS L4LEN IDX */
|
|
mss_l4len_idx |= (mp->m_pkthdr.tso_segsz << IXGBE_ADVTXD_MSS_SHIFT);
|
|
mss_l4len_idx |= (tcp_hlen << IXGBE_ADVTXD_L4LEN_SHIFT);
|
|
TXD->mss_l4len_idx = htole32(mss_l4len_idx);
|
|
|
|
TXD->seqnum_seed = htole32(0);
|
|
tx_buffer->m_head = NULL;
|
|
tx_buffer->eop_index = -1;
|
|
|
|
if (++ctxd == adapter->num_tx_desc)
|
|
ctxd = 0;
|
|
|
|
txr->tx_avail--;
|
|
txr->next_avail_tx_desc = ctxd;
|
|
return TRUE;
|
|
}
|
|
|
|
|
|
/**********************************************************************
|
|
*
|
|
* Examine each tx_buffer in the used queue. If the hardware is done
|
|
* processing the packet then free associated resources. The
|
|
* tx_buffer is put back on the free queue.
|
|
*
|
|
**********************************************************************/
|
|
static boolean_t
|
|
ixgbe_txeof(struct tx_ring *txr)
|
|
{
|
|
struct adapter * adapter = txr->adapter;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
u32 first, last, done, num_avail;
|
|
u32 cleaned = 0;
|
|
struct ixgbe_tx_buf *tx_buffer;
|
|
struct ixgbe_legacy_tx_desc *tx_desc, *eop_desc;
|
|
|
|
mtx_assert(&txr->tx_mtx, MA_OWNED);
|
|
|
|
if (txr->tx_avail == adapter->num_tx_desc)
|
|
return FALSE;
|
|
|
|
num_avail = txr->tx_avail;
|
|
first = txr->next_tx_to_clean;
|
|
|
|
tx_buffer = &txr->tx_buffers[first];
|
|
/* For cleanup we just use legacy struct */
|
|
tx_desc = (struct ixgbe_legacy_tx_desc *)&txr->tx_base[first];
|
|
last = tx_buffer->eop_index;
|
|
if (last == -1)
|
|
return FALSE;
|
|
|
|
eop_desc = (struct ixgbe_legacy_tx_desc *)&txr->tx_base[last];
|
|
/*
|
|
** Get the index of the first descriptor
|
|
** BEYOND the EOP and call that 'done'.
|
|
** I do this so the comparison in the
|
|
** inner while loop below can be simple
|
|
*/
|
|
if (++last == adapter->num_tx_desc) last = 0;
|
|
done = last;
|
|
|
|
bus_dmamap_sync(txr->txdma.dma_tag, txr->txdma.dma_map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
/*
|
|
** Only the EOP descriptor of a packet now has the DD
|
|
** bit set, this is what we look for...
|
|
*/
|
|
while (eop_desc->upper.fields.status & IXGBE_TXD_STAT_DD) {
|
|
/* We clean the range of the packet */
|
|
while (first != done) {
|
|
tx_desc->upper.data = 0;
|
|
tx_desc->lower.data = 0;
|
|
tx_desc->buffer_addr = 0;
|
|
num_avail++; cleaned++;
|
|
|
|
if (tx_buffer->m_head) {
|
|
ifp->if_opackets++;
|
|
bus_dmamap_sync(txr->txtag,
|
|
tx_buffer->map,
|
|
BUS_DMASYNC_POSTWRITE);
|
|
bus_dmamap_unload(txr->txtag,
|
|
tx_buffer->map);
|
|
m_freem(tx_buffer->m_head);
|
|
tx_buffer->m_head = NULL;
|
|
tx_buffer->map = NULL;
|
|
}
|
|
tx_buffer->eop_index = -1;
|
|
|
|
if (++first == adapter->num_tx_desc)
|
|
first = 0;
|
|
|
|
tx_buffer = &txr->tx_buffers[first];
|
|
tx_desc =
|
|
(struct ixgbe_legacy_tx_desc *)&txr->tx_base[first];
|
|
}
|
|
/* See if there is more work now */
|
|
last = tx_buffer->eop_index;
|
|
if (last != -1) {
|
|
eop_desc =
|
|
(struct ixgbe_legacy_tx_desc *)&txr->tx_base[last];
|
|
/* Get next done point */
|
|
if (++last == adapter->num_tx_desc) last = 0;
|
|
done = last;
|
|
} else
|
|
break;
|
|
}
|
|
bus_dmamap_sync(txr->txdma.dma_tag, txr->txdma.dma_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
txr->next_tx_to_clean = first;
|
|
|
|
/*
|
|
* If we have enough room, clear IFF_DRV_OACTIVE to tell the stack that
|
|
* it is OK to send packets. If there are no pending descriptors,
|
|
* clear the timeout. Otherwise, if some descriptors have been freed,
|
|
* restart the timeout.
|
|
*/
|
|
if (num_avail > IXGBE_TX_CLEANUP_THRESHOLD) {
|
|
ifp->if_drv_flags &= ~IFF_DRV_OACTIVE;
|
|
/* If all are clean turn off the timer */
|
|
if (num_avail == adapter->num_tx_desc) {
|
|
txr->watchdog_timer = 0;
|
|
txr->tx_avail = num_avail;
|
|
return FALSE;
|
|
}
|
|
}
|
|
|
|
/* Some were cleaned, so reset timer */
|
|
if (cleaned)
|
|
txr->watchdog_timer = IXGBE_TX_TIMEOUT;
|
|
txr->tx_avail = num_avail;
|
|
return TRUE;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Get a buffer from system mbuf buffer pool.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_get_buf(struct rx_ring *rxr, int i, u8 clean)
|
|
{
|
|
struct adapter *adapter = rxr->adapter;
|
|
bus_dma_segment_t seg[2];
|
|
struct ixgbe_rx_buf *rxbuf;
|
|
struct mbuf *mh, *mp;
|
|
bus_dmamap_t map;
|
|
int nsegs, error;
|
|
int merr = 0;
|
|
|
|
|
|
rxbuf = &rxr->rx_buffers[i];
|
|
|
|
/* First get our header and payload mbuf */
|
|
if (clean & IXGBE_CLEAN_HDR) {
|
|
mh = m_gethdr(M_DONTWAIT, MT_DATA);
|
|
if (mh == NULL)
|
|
goto remap;
|
|
} else /* reuse */
|
|
mh = rxr->rx_buffers[i].m_head;
|
|
|
|
mh->m_len = MHLEN;
|
|
mh->m_flags |= M_PKTHDR;
|
|
|
|
if (clean & IXGBE_CLEAN_PKT) {
|
|
mp = m_getjcl(M_DONTWAIT, MT_DATA,
|
|
M_PKTHDR, adapter->rx_mbuf_sz);
|
|
if (mp == NULL)
|
|
goto remap;
|
|
mp->m_len = adapter->rx_mbuf_sz;
|
|
mp->m_flags &= ~M_PKTHDR;
|
|
} else { /* reusing */
|
|
mp = rxr->rx_buffers[i].m_pack;
|
|
mp->m_len = adapter->rx_mbuf_sz;
|
|
mp->m_flags &= ~M_PKTHDR;
|
|
}
|
|
/*
|
|
** Need to create a chain for the following
|
|
** dmamap call at this point.
|
|
*/
|
|
mh->m_next = mp;
|
|
mh->m_pkthdr.len = mh->m_len + mp->m_len;
|
|
|
|
/* Get the memory mapping */
|
|
error = bus_dmamap_load_mbuf_sg(rxr->rxtag,
|
|
rxr->spare_map, mh, seg, &nsegs, BUS_DMA_NOWAIT);
|
|
if (error != 0) {
|
|
printf("GET BUF: dmamap load failure - %d\n", error);
|
|
m_free(mh);
|
|
return (error);
|
|
}
|
|
|
|
/* Unload old mapping and update buffer struct */
|
|
if (rxbuf->m_head != NULL)
|
|
bus_dmamap_unload(rxr->rxtag, rxbuf->map);
|
|
map = rxbuf->map;
|
|
rxbuf->map = rxr->spare_map;
|
|
rxr->spare_map = map;
|
|
rxbuf->m_head = mh;
|
|
rxbuf->m_pack = mp;
|
|
bus_dmamap_sync(rxr->rxtag,
|
|
rxbuf->map, BUS_DMASYNC_PREREAD);
|
|
|
|
/* Update descriptor */
|
|
rxr->rx_base[i].read.hdr_addr = htole64(seg[0].ds_addr);
|
|
rxr->rx_base[i].read.pkt_addr = htole64(seg[1].ds_addr);
|
|
|
|
return (0);
|
|
|
|
/*
|
|
** If we get here, we have an mbuf resource
|
|
** issue, so we discard the incoming packet
|
|
** and attempt to reuse existing mbufs next
|
|
** pass thru the ring, but to do so we must
|
|
** fix up the descriptor which had the address
|
|
** clobbered with writeback info.
|
|
*/
|
|
remap:
|
|
adapter->mbuf_header_failed++;
|
|
merr = ENOBUFS;
|
|
/* Is there a reusable buffer? */
|
|
mh = rxr->rx_buffers[i].m_head;
|
|
if (mh == NULL) /* Nope, init error */
|
|
return (merr);
|
|
mp = rxr->rx_buffers[i].m_pack;
|
|
if (mp == NULL) /* Nope, init error */
|
|
return (merr);
|
|
/* Get our old mapping */
|
|
rxbuf = &rxr->rx_buffers[i];
|
|
error = bus_dmamap_load_mbuf_sg(rxr->rxtag,
|
|
rxbuf->map, mh, seg, &nsegs, BUS_DMA_NOWAIT);
|
|
if (error != 0) {
|
|
/* We really have a problem */
|
|
m_free(mh);
|
|
return (error);
|
|
}
|
|
/* Now fix the descriptor as needed */
|
|
rxr->rx_base[i].read.hdr_addr = htole64(seg[0].ds_addr);
|
|
rxr->rx_base[i].read.pkt_addr = htole64(seg[1].ds_addr);
|
|
|
|
return (merr);
|
|
}
|
|
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Allocate memory for rx_buffer structures. Since we use one
|
|
* rx_buffer per received packet, the maximum number of rx_buffer's
|
|
* that we'll need is equal to the number of receive descriptors
|
|
* that we've allocated.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_allocate_receive_buffers(struct rx_ring *rxr)
|
|
{
|
|
struct adapter *adapter = rxr->adapter;
|
|
device_t dev = adapter->dev;
|
|
struct ixgbe_rx_buf *rxbuf;
|
|
int i, bsize, error;
|
|
|
|
bsize = sizeof(struct ixgbe_rx_buf) * adapter->num_rx_desc;
|
|
if (!(rxr->rx_buffers =
|
|
(struct ixgbe_rx_buf *) malloc(bsize,
|
|
M_DEVBUF, M_NOWAIT | M_ZERO))) {
|
|
device_printf(dev, "Unable to allocate rx_buffer memory\n");
|
|
error = ENOMEM;
|
|
goto fail;
|
|
}
|
|
|
|
/*
|
|
** The tag is made to accomodate the largest buffer size
|
|
** with packet split (hence the two segments, even though
|
|
** it may not always use this.
|
|
*/
|
|
if ((error = bus_dma_tag_create(NULL, /* parent */
|
|
1, 0, /* alignment, bounds */
|
|
BUS_SPACE_MAXADDR, /* lowaddr */
|
|
BUS_SPACE_MAXADDR, /* highaddr */
|
|
NULL, NULL, /* filter, filterarg */
|
|
MJUM16BYTES, /* maxsize */
|
|
2, /* nsegments */
|
|
MJUMPAGESIZE, /* maxsegsize */
|
|
0, /* flags */
|
|
NULL, /* lockfunc */
|
|
NULL, /* lockfuncarg */
|
|
&rxr->rxtag))) {
|
|
device_printf(dev, "Unable to create RX DMA tag\n");
|
|
goto fail;
|
|
}
|
|
|
|
/* Create the spare map (used by getbuf) */
|
|
error = bus_dmamap_create(rxr->rxtag, BUS_DMA_NOWAIT,
|
|
&rxr->spare_map);
|
|
if (error) {
|
|
device_printf(dev, "%s: bus_dmamap_create failed: %d\n",
|
|
__func__, error);
|
|
goto fail;
|
|
}
|
|
|
|
for (i = 0; i < adapter->num_rx_desc; i++, rxbuf++) {
|
|
rxbuf = &rxr->rx_buffers[i];
|
|
error = bus_dmamap_create(rxr->rxtag,
|
|
BUS_DMA_NOWAIT, &rxbuf->map);
|
|
if (error) {
|
|
device_printf(dev, "Unable to create RX DMA map\n");
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
return (0);
|
|
|
|
fail:
|
|
/* Frees all, but can handle partial completion */
|
|
ixgbe_free_receive_structures(adapter);
|
|
return (error);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Initialize a receive ring and its buffers.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_setup_receive_ring(struct rx_ring *rxr)
|
|
{
|
|
struct adapter *adapter;
|
|
struct ifnet *ifp;
|
|
device_t dev;
|
|
struct ixgbe_rx_buf *rxbuf;
|
|
struct lro_ctrl *lro = &rxr->lro;
|
|
int j, rsize;
|
|
|
|
adapter = rxr->adapter;
|
|
ifp = adapter->ifp;
|
|
dev = adapter->dev;
|
|
|
|
/* Clear the ring contents */
|
|
rsize = roundup2(adapter->num_rx_desc *
|
|
sizeof(union ixgbe_adv_rx_desc), DBA_ALIGN);
|
|
bzero((void *)rxr->rx_base, rsize);
|
|
|
|
/*
|
|
** Free current RX buffer structs and their mbufs
|
|
*/
|
|
for (int i = 0; i < adapter->num_rx_desc; i++) {
|
|
rxbuf = &rxr->rx_buffers[i];
|
|
if (rxbuf->m_head != NULL) {
|
|
bus_dmamap_sync(rxr->rxtag, rxbuf->map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(rxr->rxtag, rxbuf->map);
|
|
if (rxbuf->m_head) {
|
|
rxbuf->m_head->m_next = rxbuf->m_pack;
|
|
m_freem(rxbuf->m_head);
|
|
}
|
|
rxbuf->m_head = NULL;
|
|
rxbuf->m_pack = NULL;
|
|
}
|
|
}
|
|
|
|
/* Now refresh the mbufs */
|
|
for (j = 0; j < adapter->num_rx_desc; j++) {
|
|
if (ixgbe_get_buf(rxr, j, IXGBE_CLEAN_ALL) == ENOBUFS) {
|
|
rxr->rx_buffers[j].m_head = NULL;
|
|
rxr->rx_buffers[j].m_pack = NULL;
|
|
rxr->rx_base[j].read.hdr_addr = 0;
|
|
rxr->rx_base[j].read.pkt_addr = 0;
|
|
goto fail;
|
|
}
|
|
}
|
|
|
|
/* Setup our descriptor indices */
|
|
rxr->next_to_check = 0;
|
|
rxr->last_cleaned = 0;
|
|
rxr->lro_enabled = FALSE;
|
|
|
|
/* Use header split if configured */
|
|
if (ixgbe_header_split)
|
|
rxr->hdr_split = TRUE;
|
|
|
|
bus_dmamap_sync(rxr->rxdma.dma_tag, rxr->rxdma.dma_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
/*
|
|
** Now set up the LRO interface, we
|
|
** also only do head split when LRO
|
|
** is enabled, since so often they
|
|
** are undesireable in similar setups.
|
|
*/
|
|
if (ifp->if_capenable & IFCAP_LRO) {
|
|
int err = tcp_lro_init(lro);
|
|
if (err) {
|
|
INIT_DEBUGOUT("LRO Initialization failed!\n");
|
|
goto fail;
|
|
}
|
|
INIT_DEBUGOUT("RX LRO Initialized\n");
|
|
rxr->lro_enabled = TRUE;
|
|
lro->ifp = adapter->ifp;
|
|
}
|
|
|
|
return (0);
|
|
|
|
fail:
|
|
/*
|
|
* We need to clean up any buffers allocated
|
|
* so far, 'j' is the failing index.
|
|
*/
|
|
for (int i = 0; i < j; i++) {
|
|
rxbuf = &rxr->rx_buffers[i];
|
|
if (rxbuf->m_head != NULL) {
|
|
bus_dmamap_sync(rxr->rxtag, rxbuf->map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(rxr->rxtag, rxbuf->map);
|
|
m_freem(rxbuf->m_head);
|
|
rxbuf->m_head = NULL;
|
|
}
|
|
}
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Initialize all receive rings.
|
|
*
|
|
**********************************************************************/
|
|
static int
|
|
ixgbe_setup_receive_structures(struct adapter *adapter)
|
|
{
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
int j;
|
|
|
|
for (j = 0; j < adapter->num_queues; j++, rxr++)
|
|
if (ixgbe_setup_receive_ring(rxr))
|
|
goto fail;
|
|
|
|
return (0);
|
|
fail:
|
|
/*
|
|
* Free RX buffers allocated so far, we will only handle
|
|
* the rings that completed, the failing case will have
|
|
* cleaned up for itself. 'j' failed, so its the terminus.
|
|
*/
|
|
for (int i = 0; i < j; ++i) {
|
|
rxr = &adapter->rx_rings[i];
|
|
for (int n = 0; n < adapter->num_rx_desc; n++) {
|
|
struct ixgbe_rx_buf *rxbuf;
|
|
rxbuf = &rxr->rx_buffers[n];
|
|
if (rxbuf->m_head != NULL) {
|
|
bus_dmamap_sync(rxr->rxtag, rxbuf->map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(rxr->rxtag, rxbuf->map);
|
|
m_freem(rxbuf->m_head);
|
|
rxbuf->m_head = NULL;
|
|
}
|
|
}
|
|
}
|
|
|
|
return (ENOBUFS);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Setup receive registers and features.
|
|
*
|
|
**********************************************************************/
|
|
#define IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT 2
|
|
|
|
static void
|
|
ixgbe_initialize_receive_units(struct adapter *adapter)
|
|
{
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
u32 bufsz, rxctrl, fctrl, srrctl, rxcsum;
|
|
u32 reta, mrqc = 0, hlreg, random[10];
|
|
|
|
|
|
/*
|
|
* Make sure receives are disabled while
|
|
* setting up the descriptor ring
|
|
*/
|
|
rxctrl = IXGBE_READ_REG(hw, IXGBE_RXCTRL);
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXCTRL,
|
|
rxctrl & ~IXGBE_RXCTRL_RXEN);
|
|
|
|
/* Enable broadcasts */
|
|
fctrl = IXGBE_READ_REG(hw, IXGBE_FCTRL);
|
|
fctrl |= IXGBE_FCTRL_BAM;
|
|
fctrl |= IXGBE_FCTRL_DPF;
|
|
fctrl |= IXGBE_FCTRL_PMCF;
|
|
IXGBE_WRITE_REG(hw, IXGBE_FCTRL, fctrl);
|
|
|
|
/* Set for Jumbo Frames? */
|
|
hlreg = IXGBE_READ_REG(hw, IXGBE_HLREG0);
|
|
if (ifp->if_mtu > ETHERMTU) {
|
|
hlreg |= IXGBE_HLREG0_JUMBOEN;
|
|
bufsz = 4096 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
|
|
} else {
|
|
hlreg &= ~IXGBE_HLREG0_JUMBOEN;
|
|
bufsz = 2048 >> IXGBE_SRRCTL_BSIZEPKT_SHIFT;
|
|
}
|
|
IXGBE_WRITE_REG(hw, IXGBE_HLREG0, hlreg);
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, rxr++) {
|
|
u64 rdba = rxr->rxdma.dma_paddr;
|
|
|
|
/* Setup the Base and Length of the Rx Descriptor Ring */
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDBAL(i),
|
|
(rdba & 0x00000000ffffffffULL));
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDBAH(i), (rdba >> 32));
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDLEN(i),
|
|
adapter->num_rx_desc * sizeof(union ixgbe_adv_rx_desc));
|
|
|
|
/* Set up the SRRCTL register */
|
|
srrctl = IXGBE_READ_REG(hw, IXGBE_SRRCTL(i));
|
|
srrctl &= ~IXGBE_SRRCTL_BSIZEHDR_MASK;
|
|
srrctl &= ~IXGBE_SRRCTL_BSIZEPKT_MASK;
|
|
srrctl |= bufsz;
|
|
if (rxr->hdr_split) {
|
|
/* Use a standard mbuf for the header */
|
|
srrctl |= ((IXGBE_RX_HDR <<
|
|
IXGBE_SRRCTL_BSIZEHDRSIZE_SHIFT)
|
|
& IXGBE_SRRCTL_BSIZEHDR_MASK);
|
|
srrctl |= IXGBE_SRRCTL_DESCTYPE_HDR_SPLIT_ALWAYS;
|
|
if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
|
|
/* PSRTYPE must be initialized in 82599 */
|
|
u32 psrtype = IXGBE_PSRTYPE_TCPHDR |
|
|
IXGBE_PSRTYPE_UDPHDR |
|
|
IXGBE_PSRTYPE_IPV4HDR |
|
|
IXGBE_PSRTYPE_IPV6HDR;
|
|
IXGBE_WRITE_REG(hw, IXGBE_PSRTYPE(0), psrtype);
|
|
}
|
|
} else
|
|
srrctl |= IXGBE_SRRCTL_DESCTYPE_ADV_ONEBUF;
|
|
IXGBE_WRITE_REG(hw, IXGBE_SRRCTL(i), srrctl);
|
|
|
|
/* Setup the HW Rx Head and Tail Descriptor Pointers */
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDH(i), 0);
|
|
IXGBE_WRITE_REG(hw, IXGBE_RDT(i), 0);
|
|
}
|
|
|
|
rxcsum = IXGBE_READ_REG(hw, IXGBE_RXCSUM);
|
|
|
|
/* Setup RSS */
|
|
if (adapter->num_queues > 1) {
|
|
int i, j;
|
|
reta = 0;
|
|
|
|
/* set up random bits */
|
|
arc4rand(&random, sizeof(random), 0);
|
|
|
|
/* Set up the redirection table */
|
|
for (i = 0, j = 0; i < 128; i++, j++) {
|
|
if (j == adapter->num_queues) j = 0;
|
|
reta = (reta << 8) | (j * 0x11);
|
|
if ((i & 3) == 3)
|
|
IXGBE_WRITE_REG(hw, IXGBE_RETA(i >> 2), reta);
|
|
}
|
|
|
|
/* Now fill our hash function seeds */
|
|
for (int i = 0; i < 10; i++)
|
|
IXGBE_WRITE_REG(hw, IXGBE_RSSRK(i), random[i]);
|
|
|
|
/* Perform hash on these packet types */
|
|
mrqc = IXGBE_MRQC_RSSEN
|
|
| IXGBE_MRQC_RSS_FIELD_IPV4
|
|
| IXGBE_MRQC_RSS_FIELD_IPV4_TCP
|
|
| IXGBE_MRQC_RSS_FIELD_IPV4_UDP
|
|
| IXGBE_MRQC_RSS_FIELD_IPV6_EX_TCP
|
|
| IXGBE_MRQC_RSS_FIELD_IPV6_EX
|
|
| IXGBE_MRQC_RSS_FIELD_IPV6
|
|
| IXGBE_MRQC_RSS_FIELD_IPV6_TCP
|
|
| IXGBE_MRQC_RSS_FIELD_IPV6_UDP
|
|
| IXGBE_MRQC_RSS_FIELD_IPV6_EX_UDP;
|
|
IXGBE_WRITE_REG(hw, IXGBE_MRQC, mrqc);
|
|
|
|
/* RSS and RX IPP Checksum are mutually exclusive */
|
|
rxcsum |= IXGBE_RXCSUM_PCSD;
|
|
}
|
|
|
|
if (ifp->if_capenable & IFCAP_RXCSUM)
|
|
rxcsum |= IXGBE_RXCSUM_PCSD;
|
|
|
|
if (!(rxcsum & IXGBE_RXCSUM_PCSD))
|
|
rxcsum |= IXGBE_RXCSUM_IPPCSE;
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum);
|
|
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Free all receive rings.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_free_receive_structures(struct adapter *adapter)
|
|
{
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, rxr++) {
|
|
struct lro_ctrl *lro = &rxr->lro;
|
|
ixgbe_free_receive_buffers(rxr);
|
|
/* Free LRO memory */
|
|
tcp_lro_free(lro);
|
|
/* Free the ring memory as well */
|
|
ixgbe_dma_free(adapter, &rxr->rxdma);
|
|
}
|
|
|
|
free(adapter->rx_rings, M_DEVBUF);
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Free receive ring data structures
|
|
*
|
|
**********************************************************************/
|
|
void
|
|
ixgbe_free_receive_buffers(struct rx_ring *rxr)
|
|
{
|
|
struct adapter *adapter = NULL;
|
|
struct ixgbe_rx_buf *rxbuf = NULL;
|
|
|
|
INIT_DEBUGOUT("free_receive_buffers: begin");
|
|
adapter = rxr->adapter;
|
|
if (rxr->rx_buffers != NULL) {
|
|
rxbuf = &rxr->rx_buffers[0];
|
|
for (int i = 0; i < adapter->num_rx_desc; i++) {
|
|
if (rxbuf->map != NULL) {
|
|
bus_dmamap_sync(rxr->rxtag, rxbuf->map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
bus_dmamap_unload(rxr->rxtag, rxbuf->map);
|
|
bus_dmamap_destroy(rxr->rxtag, rxbuf->map);
|
|
}
|
|
if (rxbuf->m_head != NULL) {
|
|
m_freem(rxbuf->m_head);
|
|
}
|
|
rxbuf->m_head = NULL;
|
|
++rxbuf;
|
|
}
|
|
}
|
|
if (rxr->rx_buffers != NULL) {
|
|
free(rxr->rx_buffers, M_DEVBUF);
|
|
rxr->rx_buffers = NULL;
|
|
}
|
|
if (rxr->rxtag != NULL) {
|
|
bus_dma_tag_destroy(rxr->rxtag);
|
|
rxr->rxtag = NULL;
|
|
}
|
|
return;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* This routine executes in interrupt context. It replenishes
|
|
* the mbufs in the descriptor and sends data which has been
|
|
* dma'ed into host memory to upper layer.
|
|
*
|
|
* We loop at most count times if count is > 0, or until done if
|
|
* count < 0.
|
|
*
|
|
* Return TRUE for more work, FALSE for all clean.
|
|
*********************************************************************/
|
|
static bool
|
|
ixgbe_rxeof(struct rx_ring *rxr, int count)
|
|
{
|
|
struct adapter *adapter = rxr->adapter;
|
|
struct ifnet *ifp = adapter->ifp;
|
|
struct lro_ctrl *lro = &rxr->lro;
|
|
struct lro_entry *queued;
|
|
int i;
|
|
u32 staterr;
|
|
union ixgbe_adv_rx_desc *cur;
|
|
|
|
|
|
IXGBE_RX_LOCK(rxr);
|
|
i = rxr->next_to_check;
|
|
cur = &rxr->rx_base[i];
|
|
staterr = cur->wb.upper.status_error;
|
|
|
|
if (!(staterr & IXGBE_RXD_STAT_DD)) {
|
|
IXGBE_RX_UNLOCK(rxr);
|
|
return FALSE;
|
|
}
|
|
|
|
/* Sync the ring */
|
|
bus_dmamap_sync(rxr->rxdma.dma_tag, rxr->rxdma.dma_map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
|
|
while ((staterr & IXGBE_RXD_STAT_DD) && (count != 0) &&
|
|
(ifp->if_drv_flags & IFF_DRV_RUNNING)) {
|
|
struct mbuf *sendmp, *mh, *mp;
|
|
u16 hlen, plen, hdr, vtag;
|
|
u8 dopayload, accept_frame, eop;
|
|
|
|
|
|
accept_frame = 1;
|
|
hlen = plen = vtag = 0;
|
|
sendmp = mh = mp = NULL;
|
|
|
|
/* Sync the buffers */
|
|
bus_dmamap_sync(rxr->rxtag, rxr->rx_buffers[i].map,
|
|
BUS_DMASYNC_POSTREAD);
|
|
|
|
/*
|
|
** The way the hardware is configured to
|
|
** split, it will ONLY use the header buffer
|
|
** when header split is enabled, otherwise we
|
|
** get normal behavior, ie, both header and
|
|
** payload are DMA'd into the payload buffer.
|
|
**
|
|
** The fmp test is to catch the case where a
|
|
** packet spans multiple descriptors, in that
|
|
** case only the first header is valid.
|
|
*/
|
|
if ((rxr->hdr_split) && (rxr->fmp == NULL)){
|
|
hdr = le16toh(cur->
|
|
wb.lower.lo_dword.hs_rss.hdr_info);
|
|
hlen = (hdr & IXGBE_RXDADV_HDRBUFLEN_MASK) >>
|
|
IXGBE_RXDADV_HDRBUFLEN_SHIFT;
|
|
if (hlen > IXGBE_RX_HDR)
|
|
hlen = IXGBE_RX_HDR;
|
|
plen = le16toh(cur->wb.upper.length);
|
|
/* Handle the header mbuf */
|
|
mh = rxr->rx_buffers[i].m_head;
|
|
mh->m_len = hlen;
|
|
dopayload = IXGBE_CLEAN_HDR;
|
|
/*
|
|
** Get the payload length, this
|
|
** could be zero if its a small
|
|
** packet.
|
|
*/
|
|
if (plen) {
|
|
mp = rxr->rx_buffers[i].m_pack;
|
|
mp->m_len = plen;
|
|
mp->m_next = NULL;
|
|
mp->m_flags &= ~M_PKTHDR;
|
|
mh->m_next = mp;
|
|
mh->m_flags |= M_PKTHDR;
|
|
dopayload = IXGBE_CLEAN_ALL;
|
|
rxr->rx_split_packets++;
|
|
} else { /* small packets */
|
|
mh->m_flags &= ~M_PKTHDR;
|
|
mh->m_next = NULL;
|
|
}
|
|
} else {
|
|
/*
|
|
** Either no header split, or a
|
|
** secondary piece of a fragmented
|
|
** split packet.
|
|
*/
|
|
mh = rxr->rx_buffers[i].m_pack;
|
|
mh->m_flags |= M_PKTHDR;
|
|
mh->m_len = le16toh(cur->wb.upper.length);
|
|
dopayload = IXGBE_CLEAN_PKT;
|
|
}
|
|
|
|
if (staterr & IXGBE_RXD_STAT_EOP) {
|
|
count--;
|
|
eop = 1;
|
|
} else
|
|
eop = 0;
|
|
|
|
#ifdef IXGBE_IEEE1588
|
|
This code needs to be converted to work here
|
|
-----------------------------------------------------
|
|
if (unlikely(staterr & IXGBE_RXD_STAT_TS)) {
|
|
u64 regval;
|
|
u64 ns;
|
|
// Create an mtag and set it up
|
|
struct skb_shared_hwtstamps *shhwtstamps =
|
|
skb_hwtstamps(skb);
|
|
|
|
rd32(IXGBE_TSYNCRXCTL) & IXGBE_TSYNCRXCTL_VALID),
|
|
"igb: no RX time stamp available for time stamped packet");
|
|
regval = rd32(IXGBE_RXSTMPL);
|
|
regval |= (u64)rd32(IXGBE_RXSTMPH) << 32;
|
|
// Do time conversion from the register
|
|
ns = timecounter_cyc2time(&adapter->clock, regval);
|
|
clocksync_update(&adapter->sync, ns);
|
|
memset(shhwtstamps, 0, sizeof(*shhwtstamps));
|
|
shhwtstamps->hwtstamp = ns_to_ktime(ns);
|
|
shhwtstamps->syststamp =
|
|
clocksync_hw2sys(&adapter->sync, ns);
|
|
}
|
|
#endif
|
|
|
|
if (staterr & IXGBE_RXDADV_ERR_FRAME_ERR_MASK)
|
|
accept_frame = 0;
|
|
|
|
if (accept_frame) {
|
|
/*
|
|
** Save the vlan id, because get_buf will
|
|
** clobber the writeback descriptor...
|
|
*/
|
|
vtag = le16toh(cur->wb.upper.vlan);
|
|
if (ixgbe_get_buf(rxr, i, dopayload) != 0) {
|
|
ifp->if_iqdrops++;
|
|
goto discard;
|
|
}
|
|
/* Initial frame - setup */
|
|
if (rxr->fmp == NULL) {
|
|
mh->m_flags |= M_PKTHDR;
|
|
mh->m_pkthdr.len = mh->m_len;
|
|
rxr->fmp = mh; /* Store the first mbuf */
|
|
rxr->lmp = mh;
|
|
if (mp) { /* Add payload if split */
|
|
mh->m_pkthdr.len += mp->m_len;
|
|
rxr->lmp = mh->m_next;
|
|
}
|
|
} else {
|
|
/* Chain mbuf's together */
|
|
mh->m_flags &= ~M_PKTHDR;
|
|
rxr->lmp->m_next = mh;
|
|
rxr->lmp = rxr->lmp->m_next;
|
|
rxr->fmp->m_pkthdr.len += mh->m_len;
|
|
}
|
|
|
|
if (eop) {
|
|
rxr->fmp->m_pkthdr.rcvif = ifp;
|
|
ifp->if_ipackets++;
|
|
rxr->rx_packets++;
|
|
/* capture data for AIM */
|
|
rxr->bytes += rxr->fmp->m_pkthdr.len;
|
|
rxr->rx_bytes += rxr->bytes;
|
|
if (ifp->if_capenable & IFCAP_RXCSUM)
|
|
ixgbe_rx_checksum(staterr, rxr->fmp);
|
|
else
|
|
rxr->fmp->m_pkthdr.csum_flags = 0;
|
|
if (staterr & IXGBE_RXD_STAT_VP) {
|
|
rxr->fmp->m_pkthdr.ether_vtag = vtag;
|
|
rxr->fmp->m_flags |= M_VLANTAG;
|
|
}
|
|
#if __FreeBSD_version >= 800000
|
|
rxr->fmp->m_pkthdr.flowid = curcpu;
|
|
rxr->fmp->m_flags |= M_FLOWID;
|
|
#endif
|
|
sendmp = rxr->fmp;
|
|
rxr->fmp = NULL;
|
|
rxr->lmp = NULL;
|
|
}
|
|
} else {
|
|
ifp->if_ierrors++;
|
|
discard:
|
|
/* Reuse loaded DMA map and just update mbuf chain */
|
|
if (hlen) {
|
|
mh = rxr->rx_buffers[i].m_head;
|
|
mh->m_len = MHLEN;
|
|
mh->m_next = NULL;
|
|
}
|
|
mp = rxr->rx_buffers[i].m_pack;
|
|
mp->m_len = mp->m_pkthdr.len = adapter->rx_mbuf_sz;
|
|
mp->m_data = mp->m_ext.ext_buf;
|
|
mp->m_next = NULL;
|
|
if (adapter->max_frame_size <=
|
|
(MCLBYTES - ETHER_ALIGN))
|
|
m_adj(mp, ETHER_ALIGN);
|
|
if (rxr->fmp != NULL) {
|
|
/* handles the whole chain */
|
|
m_freem(rxr->fmp);
|
|
rxr->fmp = NULL;
|
|
rxr->lmp = NULL;
|
|
}
|
|
sendmp = NULL;
|
|
}
|
|
bus_dmamap_sync(rxr->rxdma.dma_tag, rxr->rxdma.dma_map,
|
|
BUS_DMASYNC_PREREAD | BUS_DMASYNC_PREWRITE);
|
|
|
|
rxr->last_cleaned = i; /* for updating tail */
|
|
|
|
if (++i == adapter->num_rx_desc)
|
|
i = 0;
|
|
|
|
/*
|
|
** Now send up to the stack,
|
|
** note the the value of next_to_check
|
|
** is safe because we keep the RX lock
|
|
** thru this call.
|
|
*/
|
|
if (sendmp != NULL) {
|
|
/*
|
|
** Send to the stack if:
|
|
** - LRO not enabled, or
|
|
** - no LRO resources, or
|
|
** - lro enqueue fails
|
|
*/
|
|
if ((!rxr->lro_enabled) ||
|
|
((!lro->lro_cnt) || (tcp_lro_rx(lro, sendmp, 0))))
|
|
(*ifp->if_input)(ifp, sendmp);
|
|
}
|
|
|
|
/* Get next descriptor */
|
|
cur = &rxr->rx_base[i];
|
|
staterr = cur->wb.upper.status_error;
|
|
}
|
|
rxr->next_to_check = i;
|
|
|
|
/* Advance the IXGB's Receive Queue "Tail Pointer" */
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_RDT(rxr->me), rxr->last_cleaned);
|
|
|
|
/*
|
|
* Flush any outstanding LRO work
|
|
*/
|
|
while (!SLIST_EMPTY(&lro->lro_active)) {
|
|
queued = SLIST_FIRST(&lro->lro_active);
|
|
SLIST_REMOVE_HEAD(&lro->lro_active, next);
|
|
tcp_lro_flush(lro, queued);
|
|
}
|
|
|
|
IXGBE_RX_UNLOCK(rxr);
|
|
|
|
/*
|
|
** Leaving with more to clean?
|
|
** then schedule another interrupt.
|
|
*/
|
|
if (staterr & IXGBE_RXD_STAT_DD) {
|
|
ixgbe_rearm_rx_queues(adapter, (u64)(1 << rxr->msix));
|
|
return TRUE;
|
|
}
|
|
|
|
return FALSE;
|
|
}
|
|
|
|
/*********************************************************************
|
|
*
|
|
* Verify that the hardware indicated that the checksum is valid.
|
|
* Inform the stack about the status of checksum so that stack
|
|
* doesn't spend time verifying the checksum.
|
|
*
|
|
*********************************************************************/
|
|
static void
|
|
ixgbe_rx_checksum(u32 staterr, struct mbuf * mp)
|
|
{
|
|
u16 status = (u16) staterr;
|
|
u8 errors = (u8) (staterr >> 24);
|
|
|
|
if (status & IXGBE_RXD_STAT_IPCS) {
|
|
/* Did it pass? */
|
|
if (!(errors & IXGBE_RXD_ERR_IPE)) {
|
|
/* IP Checksum Good */
|
|
mp->m_pkthdr.csum_flags = CSUM_IP_CHECKED;
|
|
mp->m_pkthdr.csum_flags |= CSUM_IP_VALID;
|
|
|
|
} else
|
|
mp->m_pkthdr.csum_flags = 0;
|
|
}
|
|
if (status & IXGBE_RXD_STAT_L4CS) {
|
|
/* Did it pass? */
|
|
if (!(errors & IXGBE_RXD_ERR_TCPE)) {
|
|
mp->m_pkthdr.csum_flags |=
|
|
(CSUM_DATA_VALID | CSUM_PSEUDO_HDR);
|
|
mp->m_pkthdr.csum_data = htons(0xffff);
|
|
}
|
|
}
|
|
return;
|
|
}
|
|
|
|
|
|
/*
|
|
** This routine is run via an vlan config EVENT,
|
|
** it enables us to use the HW Filter table since
|
|
** we can get the vlan id. This just creates the
|
|
** entry in the soft version of the VFTA, init will
|
|
** repopulate the real table.
|
|
*/
|
|
static void
|
|
ixgbe_register_vlan(void *arg, struct ifnet *ifp, u16 vtag)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
u16 index, bit;
|
|
|
|
if (ifp->if_softc != arg) /* Not our event */
|
|
return;
|
|
|
|
if ((vtag == 0) || (vtag > 4095)) /* Invalid */
|
|
return;
|
|
|
|
index = (vtag >> 5) & 0x7F;
|
|
bit = vtag & 0x1F;
|
|
ixgbe_shadow_vfta[index] |= (1 << bit);
|
|
++adapter->num_vlans;
|
|
/* Re-init to load the changes */
|
|
ixgbe_init(adapter);
|
|
}
|
|
|
|
/*
|
|
** This routine is run via an vlan
|
|
** unconfig EVENT, remove our entry
|
|
** in the soft vfta.
|
|
*/
|
|
static void
|
|
ixgbe_unregister_vlan(void *arg, struct ifnet *ifp, u16 vtag)
|
|
{
|
|
struct adapter *adapter = ifp->if_softc;
|
|
u16 index, bit;
|
|
|
|
if (ifp->if_softc != arg)
|
|
return;
|
|
|
|
if ((vtag == 0) || (vtag > 4095)) /* Invalid */
|
|
return;
|
|
|
|
index = (vtag >> 5) & 0x7F;
|
|
bit = vtag & 0x1F;
|
|
ixgbe_shadow_vfta[index] &= ~(1 << bit);
|
|
--adapter->num_vlans;
|
|
/* Re-init to load the changes */
|
|
ixgbe_init(adapter);
|
|
}
|
|
|
|
static void
|
|
ixgbe_setup_vlan_hw_support(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 ctrl;
|
|
|
|
|
|
/*
|
|
** We get here thru init_locked, meaning
|
|
** a soft reset, this has already cleared
|
|
** the VFTA and other state, so if there
|
|
** have been no vlan's registered do nothing.
|
|
*/
|
|
if (adapter->num_vlans == 0)
|
|
return;
|
|
|
|
/*
|
|
** A soft reset zero's out the VFTA, so
|
|
** we need to repopulate it now.
|
|
*/
|
|
for (int i = 0; i < IXGBE_VFTA_SIZE; i++)
|
|
if (ixgbe_shadow_vfta[i] != 0)
|
|
IXGBE_WRITE_REG(hw, IXGBE_VFTA(i),
|
|
ixgbe_shadow_vfta[i]);
|
|
|
|
/* Enable the Filter Table */
|
|
ctrl = IXGBE_READ_REG(hw, IXGBE_VLNCTRL);
|
|
ctrl &= ~IXGBE_VLNCTRL_CFIEN;
|
|
ctrl |= IXGBE_VLNCTRL_VFE;
|
|
if (hw->mac.type == ixgbe_mac_82598EB)
|
|
ctrl |= IXGBE_VLNCTRL_VME;
|
|
IXGBE_WRITE_REG(hw, IXGBE_VLNCTRL, ctrl);
|
|
|
|
/* On 82599 the VLAN enable is per/queue in RXDCTL */
|
|
if (hw->mac.type == ixgbe_mac_82599EB)
|
|
for (int i = 0; i < adapter->num_queues; i++) {
|
|
ctrl = IXGBE_READ_REG(hw, IXGBE_RXDCTL(i));
|
|
ctrl |= IXGBE_RXDCTL_VME;
|
|
IXGBE_WRITE_REG(hw, IXGBE_RXDCTL(i), ctrl);
|
|
}
|
|
}
|
|
|
|
static void
|
|
ixgbe_enable_intr(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
u32 mask = (IXGBE_EIMS_ENABLE_MASK & ~IXGBE_EIMS_RTX_QUEUE);
|
|
|
|
|
|
/* Enable Fan Failure detection */
|
|
if (hw->device_id == IXGBE_DEV_ID_82598AT)
|
|
mask |= IXGBE_EIMS_GPI_SDP1;
|
|
|
|
/* 82599 specific interrupts */
|
|
if (adapter->hw.mac.type == ixgbe_mac_82599EB) {
|
|
mask |= IXGBE_EIMS_ECC;
|
|
mask |= IXGBE_EIMS_GPI_SDP1;
|
|
mask |= IXGBE_EIMS_GPI_SDP2;
|
|
}
|
|
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIMS, mask);
|
|
|
|
/* With RSS we use auto clear */
|
|
if (adapter->msix_mem) {
|
|
mask = IXGBE_EIMS_ENABLE_MASK;
|
|
/* Dont autoclear Link */
|
|
mask &= ~IXGBE_EIMS_OTHER;
|
|
mask &= ~IXGBE_EIMS_LSC;
|
|
IXGBE_WRITE_REG(hw, IXGBE_EIAC, mask);
|
|
}
|
|
|
|
/*
|
|
** Now enable all queues, this is done seperately to
|
|
** allow for handling the extended (beyond 32) MSIX
|
|
** vectors that can be used by 82599
|
|
*/
|
|
for (int i = 0; i < adapter->num_queues; i++, rxr++)
|
|
ixgbe_enable_queue(adapter, rxr->msix);
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++)
|
|
ixgbe_enable_queue(adapter, txr->msix);
|
|
|
|
IXGBE_WRITE_FLUSH(hw);
|
|
|
|
return;
|
|
}
|
|
|
|
static void
|
|
ixgbe_disable_intr(struct adapter *adapter)
|
|
{
|
|
if (adapter->msix_mem)
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIAC, 0);
|
|
if (adapter->hw.mac.type == ixgbe_mac_82598EB) {
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, ~0);
|
|
} else {
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC, 0xFFFF0000);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(0), ~0);
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_EIMC_EX(1), ~0);
|
|
}
|
|
IXGBE_WRITE_FLUSH(&adapter->hw);
|
|
return;
|
|
}
|
|
|
|
u16
|
|
ixgbe_read_pci_cfg(struct ixgbe_hw *hw, u32 reg)
|
|
{
|
|
u16 value;
|
|
|
|
value = pci_read_config(((struct ixgbe_osdep *)hw->back)->dev,
|
|
reg, 2);
|
|
|
|
return (value);
|
|
}
|
|
|
|
void
|
|
ixgbe_write_pci_cfg(struct ixgbe_hw *hw, u32 reg, u16 value)
|
|
{
|
|
pci_write_config(((struct ixgbe_osdep *)hw->back)->dev,
|
|
reg, value, 2);
|
|
|
|
return;
|
|
}
|
|
|
|
/*
|
|
** Setup the correct IVAR register for a particular MSIX interrupt
|
|
** (yes this is all very magic and confusing :)
|
|
** - entry is the register array entry
|
|
** - vector is the MSIX vector for this queue
|
|
** - type is RX/TX/MISC
|
|
*/
|
|
static void
|
|
ixgbe_set_ivar(struct adapter *adapter, u8 entry, u8 vector, s8 type)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 ivar, index;
|
|
|
|
vector |= IXGBE_IVAR_ALLOC_VAL;
|
|
|
|
switch (hw->mac.type) {
|
|
|
|
case ixgbe_mac_82598EB:
|
|
if (type == -1)
|
|
entry = IXGBE_IVAR_OTHER_CAUSES_INDEX;
|
|
else
|
|
entry += (type * 64);
|
|
index = (entry >> 2) & 0x1F;
|
|
ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(index));
|
|
ivar &= ~(0xFF << (8 * (entry & 0x3)));
|
|
ivar |= (vector << (8 * (entry & 0x3)));
|
|
IXGBE_WRITE_REG(&adapter->hw, IXGBE_IVAR(index), ivar);
|
|
break;
|
|
|
|
case ixgbe_mac_82599EB:
|
|
if (type == -1) { /* MISC IVAR */
|
|
index = (entry & 1) * 8;
|
|
ivar = IXGBE_READ_REG(hw, IXGBE_IVAR_MISC);
|
|
ivar &= ~(0xFF << index);
|
|
ivar |= (vector << index);
|
|
IXGBE_WRITE_REG(hw, IXGBE_IVAR_MISC, ivar);
|
|
} else { /* RX/TX IVARS */
|
|
index = (16 * (entry & 1)) + (8 * type);
|
|
ivar = IXGBE_READ_REG(hw, IXGBE_IVAR(entry >> 1));
|
|
ivar &= ~(0xFF << index);
|
|
ivar |= (vector << index);
|
|
IXGBE_WRITE_REG(hw, IXGBE_IVAR(entry >> 1), ivar);
|
|
}
|
|
|
|
default:
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
ixgbe_configure_ivars(struct adapter *adapter)
|
|
{
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, rxr++)
|
|
ixgbe_set_ivar(adapter, i, rxr->msix, 0);
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++)
|
|
ixgbe_set_ivar(adapter, i, txr->msix, 1);
|
|
|
|
/* For the Link interrupt */
|
|
ixgbe_set_ivar(adapter, 1, adapter->linkvec, -1);
|
|
}
|
|
|
|
/*
|
|
** ixgbe_sfp_probe - called in the local timer to
|
|
** determine if a port had optics inserted.
|
|
*/
|
|
static bool ixgbe_sfp_probe(struct adapter *adapter)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
device_t dev = adapter->dev;
|
|
bool result = FALSE;
|
|
|
|
if ((hw->phy.type == ixgbe_phy_nl) &&
|
|
(hw->phy.sfp_type == ixgbe_sfp_type_not_present)) {
|
|
s32 ret = hw->phy.ops.identify_sfp(hw);
|
|
if (ret)
|
|
goto out;
|
|
ret = hw->phy.ops.reset(hw);
|
|
if (ret == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
device_printf(dev,"Unsupported SFP+ module detected!");
|
|
printf(" Reload driver with supported module.\n");
|
|
adapter->sfp_probe = FALSE;
|
|
goto out;
|
|
} else
|
|
device_printf(dev,"SFP+ module detected!\n");
|
|
/* We now have supported optics */
|
|
adapter->sfp_probe = FALSE;
|
|
result = TRUE;
|
|
}
|
|
out:
|
|
return (result);
|
|
}
|
|
|
|
/*
|
|
** Tasklet handler for MSIX Link interrupts
|
|
** - do outside interrupt since it might sleep
|
|
*/
|
|
static void
|
|
ixgbe_handle_link(void *context, int pending)
|
|
{
|
|
struct adapter *adapter = context;
|
|
|
|
ixgbe_check_link(&adapter->hw,
|
|
&adapter->link_speed, &adapter->link_up, 0);
|
|
ixgbe_update_link_status(adapter);
|
|
}
|
|
|
|
/*
|
|
** Tasklet for handling SFP module interrupts
|
|
*/
|
|
static void
|
|
ixgbe_handle_mod(void *context, int pending)
|
|
{
|
|
struct adapter *adapter = context;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
device_t dev = adapter->dev;
|
|
u32 err;
|
|
|
|
err = hw->phy.ops.identify_sfp(hw);
|
|
if (err == IXGBE_ERR_SFP_NOT_SUPPORTED) {
|
|
device_printf(dev,
|
|
"Unsupported SFP+ module type was detected.\n");
|
|
return;
|
|
}
|
|
hw->mac.ops.setup_sfp(hw);
|
|
taskqueue_enqueue(adapter->tq, &adapter->msf_task);
|
|
return;
|
|
}
|
|
|
|
|
|
/*
|
|
** Tasklet for handling MSF (multispeed fiber) interrupts
|
|
*/
|
|
static void
|
|
ixgbe_handle_msf(void *context, int pending)
|
|
{
|
|
struct adapter *adapter = context;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 autoneg;
|
|
|
|
if (hw->mac.ops.get_link_capabilities)
|
|
hw->mac.ops.get_link_capabilities(hw, &autoneg,
|
|
&hw->mac.autoneg);
|
|
if (hw->mac.ops.setup_link_speed)
|
|
hw->mac.ops.setup_link_speed(hw, autoneg, TRUE, TRUE);
|
|
ixgbe_check_link(&adapter->hw,
|
|
&adapter->link_speed, &adapter->link_up, 0);
|
|
ixgbe_update_link_status(adapter);
|
|
return;
|
|
}
|
|
|
|
/**********************************************************************
|
|
*
|
|
* Update the board statistics counters.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_update_stats_counters(struct adapter *adapter)
|
|
{
|
|
struct ifnet *ifp = adapter->ifp;;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u32 missed_rx = 0, bprc, lxon, lxoff, total;
|
|
u64 total_missed_rx = 0;
|
|
|
|
adapter->stats.crcerrs += IXGBE_READ_REG(hw, IXGBE_CRCERRS);
|
|
|
|
for (int i = 0; i < 8; i++) {
|
|
/* missed_rx tallies misses for the gprc workaround */
|
|
missed_rx += IXGBE_READ_REG(hw, IXGBE_MPC(i));
|
|
adapter->stats.mpc[i] += missed_rx;
|
|
/* Running comprehensive total for stats display */
|
|
total_missed_rx += adapter->stats.mpc[i];
|
|
if (hw->mac.type == ixgbe_mac_82598EB)
|
|
adapter->stats.rnbc[i] +=
|
|
IXGBE_READ_REG(hw, IXGBE_RNBC(i));
|
|
}
|
|
|
|
/* Hardware workaround, gprc counts missed packets */
|
|
adapter->stats.gprc += IXGBE_READ_REG(hw, IXGBE_GPRC);
|
|
adapter->stats.gprc -= missed_rx;
|
|
|
|
if (hw->mac.type == ixgbe_mac_82599EB) {
|
|
adapter->stats.gorc += IXGBE_READ_REG(hw, IXGBE_GORCL);
|
|
IXGBE_READ_REG(hw, IXGBE_GORCH); /* clears register */
|
|
adapter->stats.gotc += IXGBE_READ_REG(hw, IXGBE_GOTCL);
|
|
IXGBE_READ_REG(hw, IXGBE_GOTCH); /* clears register */
|
|
adapter->stats.tor += IXGBE_READ_REG(hw, IXGBE_TORL);
|
|
IXGBE_READ_REG(hw, IXGBE_TORH); /* clears register */
|
|
adapter->stats.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXCNT);
|
|
adapter->stats.lxoffrxc += IXGBE_READ_REG(hw, IXGBE_LXOFFRXCNT);
|
|
} else {
|
|
adapter->stats.lxonrxc += IXGBE_READ_REG(hw, IXGBE_LXONRXC);
|
|
adapter->stats.lxoffrxc += IXGBE_READ_REG(hw, IXGBE_LXOFFRXC);
|
|
/* 82598 only has a counter in the high register */
|
|
adapter->stats.gorc += IXGBE_READ_REG(hw, IXGBE_GORCH);
|
|
adapter->stats.gorc += IXGBE_READ_REG(hw, IXGBE_GOTCH);
|
|
adapter->stats.tor += IXGBE_READ_REG(hw, IXGBE_TORH);
|
|
}
|
|
|
|
/*
|
|
* Workaround: mprc hardware is incorrectly counting
|
|
* broadcasts, so for now we subtract those.
|
|
*/
|
|
bprc = IXGBE_READ_REG(hw, IXGBE_BPRC);
|
|
adapter->stats.bprc += bprc;
|
|
adapter->stats.mprc += IXGBE_READ_REG(hw, IXGBE_MPRC);
|
|
adapter->stats.mprc -= bprc;
|
|
|
|
adapter->stats.roc += IXGBE_READ_REG(hw, IXGBE_ROC);
|
|
adapter->stats.prc64 += IXGBE_READ_REG(hw, IXGBE_PRC64);
|
|
adapter->stats.prc127 += IXGBE_READ_REG(hw, IXGBE_PRC127);
|
|
adapter->stats.prc255 += IXGBE_READ_REG(hw, IXGBE_PRC255);
|
|
adapter->stats.prc511 += IXGBE_READ_REG(hw, IXGBE_PRC511);
|
|
adapter->stats.prc1023 += IXGBE_READ_REG(hw, IXGBE_PRC1023);
|
|
adapter->stats.prc1522 += IXGBE_READ_REG(hw, IXGBE_PRC1522);
|
|
adapter->stats.rlec += IXGBE_READ_REG(hw, IXGBE_RLEC);
|
|
|
|
lxon = IXGBE_READ_REG(hw, IXGBE_LXONTXC);
|
|
adapter->stats.lxontxc += lxon;
|
|
lxoff = IXGBE_READ_REG(hw, IXGBE_LXOFFTXC);
|
|
adapter->stats.lxofftxc += lxoff;
|
|
total = lxon + lxoff;
|
|
|
|
adapter->stats.gptc += IXGBE_READ_REG(hw, IXGBE_GPTC);
|
|
adapter->stats.mptc += IXGBE_READ_REG(hw, IXGBE_MPTC);
|
|
adapter->stats.ptc64 += IXGBE_READ_REG(hw, IXGBE_PTC64);
|
|
adapter->stats.gptc -= total;
|
|
adapter->stats.mptc -= total;
|
|
adapter->stats.ptc64 -= total;
|
|
adapter->stats.gotc -= total * ETHER_MIN_LEN;
|
|
|
|
adapter->stats.ruc += IXGBE_READ_REG(hw, IXGBE_RUC);
|
|
adapter->stats.rfc += IXGBE_READ_REG(hw, IXGBE_RFC);
|
|
adapter->stats.rjc += IXGBE_READ_REG(hw, IXGBE_RJC);
|
|
adapter->stats.tpr += IXGBE_READ_REG(hw, IXGBE_TPR);
|
|
adapter->stats.ptc127 += IXGBE_READ_REG(hw, IXGBE_PTC127);
|
|
adapter->stats.ptc255 += IXGBE_READ_REG(hw, IXGBE_PTC255);
|
|
adapter->stats.ptc511 += IXGBE_READ_REG(hw, IXGBE_PTC511);
|
|
adapter->stats.ptc1023 += IXGBE_READ_REG(hw, IXGBE_PTC1023);
|
|
adapter->stats.ptc1522 += IXGBE_READ_REG(hw, IXGBE_PTC1522);
|
|
adapter->stats.bptc += IXGBE_READ_REG(hw, IXGBE_BPTC);
|
|
|
|
|
|
/* Fill out the OS statistics structure */
|
|
ifp->if_ipackets = adapter->stats.gprc;
|
|
ifp->if_opackets = adapter->stats.gptc;
|
|
ifp->if_ibytes = adapter->stats.gorc;
|
|
ifp->if_obytes = adapter->stats.gotc;
|
|
ifp->if_imcasts = adapter->stats.mprc;
|
|
ifp->if_collisions = 0;
|
|
|
|
/* Rx Errors */
|
|
ifp->if_ierrors = total_missed_rx + adapter->stats.crcerrs +
|
|
adapter->stats.rlec;
|
|
}
|
|
|
|
|
|
/**********************************************************************
|
|
*
|
|
* This routine is called only when ixgbe_display_debug_stats is enabled.
|
|
* This routine provides a way to take a look at important statistics
|
|
* maintained by the driver and hardware.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_print_hw_stats(struct adapter * adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
|
|
|
|
device_printf(dev,"Std Mbuf Failed = %lu\n",
|
|
adapter->mbuf_defrag_failed);
|
|
device_printf(dev,"Missed Packets = %llu\n",
|
|
(long long)adapter->stats.mpc[0]);
|
|
device_printf(dev,"Receive length errors = %llu\n",
|
|
((long long)adapter->stats.roc +
|
|
(long long)adapter->stats.ruc));
|
|
device_printf(dev,"Crc errors = %llu\n",
|
|
(long long)adapter->stats.crcerrs);
|
|
device_printf(dev,"Driver dropped packets = %lu\n",
|
|
adapter->dropped_pkts);
|
|
device_printf(dev, "watchdog timeouts = %ld\n",
|
|
adapter->watchdog_events);
|
|
|
|
device_printf(dev,"XON Rcvd = %llu\n",
|
|
(long long)adapter->stats.lxonrxc);
|
|
device_printf(dev,"XON Xmtd = %llu\n",
|
|
(long long)adapter->stats.lxontxc);
|
|
device_printf(dev,"XOFF Rcvd = %llu\n",
|
|
(long long)adapter->stats.lxoffrxc);
|
|
device_printf(dev,"XOFF Xmtd = %llu\n",
|
|
(long long)adapter->stats.lxofftxc);
|
|
|
|
device_printf(dev,"Total Packets Rcvd = %llu\n",
|
|
(long long)adapter->stats.tpr);
|
|
device_printf(dev,"Good Packets Rcvd = %llu\n",
|
|
(long long)adapter->stats.gprc);
|
|
device_printf(dev,"Good Packets Xmtd = %llu\n",
|
|
(long long)adapter->stats.gptc);
|
|
device_printf(dev,"TSO Transmissions = %lu\n",
|
|
adapter->tso_tx);
|
|
|
|
return;
|
|
}
|
|
|
|
/**********************************************************************
|
|
*
|
|
* This routine is called only when em_display_debug_stats is enabled.
|
|
* This routine provides a way to take a look at important statistics
|
|
* maintained by the driver and hardware.
|
|
*
|
|
**********************************************************************/
|
|
static void
|
|
ixgbe_print_debug_info(struct adapter *adapter)
|
|
{
|
|
device_t dev = adapter->dev;
|
|
struct rx_ring *rxr = adapter->rx_rings;
|
|
struct tx_ring *txr = adapter->tx_rings;
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
|
|
device_printf(dev,"Error Byte Count = %u \n",
|
|
IXGBE_READ_REG(hw, IXGBE_ERRBC));
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, rxr++) {
|
|
struct lro_ctrl *lro = &rxr->lro;
|
|
device_printf(dev,"Queue[%d]: rdh = %d, hw rdt = %d\n",
|
|
i, IXGBE_READ_REG(hw, IXGBE_RDH(i)),
|
|
IXGBE_READ_REG(hw, IXGBE_RDT(i)));
|
|
device_printf(dev,"RX(%d) Packets Received: %lld\n",
|
|
rxr->me, (long long)rxr->rx_packets);
|
|
device_printf(dev,"RX(%d) Split RX Packets: %lld\n",
|
|
rxr->me, (long long)rxr->rx_split_packets);
|
|
device_printf(dev,"RX(%d) Bytes Received: %lu\n",
|
|
rxr->me, (long)rxr->rx_bytes);
|
|
device_printf(dev,"RX(%d) IRQ Handled: %lu\n",
|
|
rxr->me, (long)rxr->rx_irq);
|
|
device_printf(dev,"RX(%d) LRO Queued= %d\n",
|
|
rxr->me, lro->lro_queued);
|
|
device_printf(dev,"RX(%d) LRO Flushed= %d\n",
|
|
rxr->me, lro->lro_flushed);
|
|
}
|
|
|
|
for (int i = 0; i < adapter->num_queues; i++, txr++) {
|
|
device_printf(dev,"Queue(%d) tdh = %d, hw tdt = %d\n", i,
|
|
IXGBE_READ_REG(hw, IXGBE_TDH(i)),
|
|
IXGBE_READ_REG(hw, IXGBE_TDT(i)));
|
|
device_printf(dev,"TX(%d) Packets Sent: %lu\n",
|
|
txr->me, (long)txr->total_packets);
|
|
device_printf(dev,"TX(%d) IRQ Handled: %lu\n",
|
|
txr->me, (long)txr->tx_irq);
|
|
device_printf(dev,"TX(%d) NO Desc Avail: %lu\n",
|
|
txr->me, (long)txr->no_tx_desc_avail);
|
|
}
|
|
|
|
device_printf(dev,"Link IRQ Handled: %lu\n",
|
|
(long)adapter->link_irq);
|
|
return;
|
|
}
|
|
|
|
static int
|
|
ixgbe_sysctl_stats(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
int result;
|
|
struct adapter *adapter;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
adapter = (struct adapter *) arg1;
|
|
ixgbe_print_hw_stats(adapter);
|
|
}
|
|
return error;
|
|
}
|
|
|
|
static int
|
|
ixgbe_sysctl_debug(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error, result;
|
|
struct adapter *adapter;
|
|
|
|
result = -1;
|
|
error = sysctl_handle_int(oidp, &result, 0, req);
|
|
|
|
if (error || !req->newptr)
|
|
return (error);
|
|
|
|
if (result == 1) {
|
|
adapter = (struct adapter *) arg1;
|
|
ixgbe_print_debug_info(adapter);
|
|
}
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
** Set flow control using sysctl:
|
|
** Flow control values:
|
|
** 0 - off
|
|
** 1 - rx pause
|
|
** 2 - tx pause
|
|
** 3 - full
|
|
*/
|
|
static int
|
|
ixgbe_set_flowcntl(SYSCTL_HANDLER_ARGS)
|
|
{
|
|
int error;
|
|
struct adapter *adapter;
|
|
|
|
error = sysctl_handle_int(oidp, &ixgbe_flow_control, 0, req);
|
|
|
|
if (error)
|
|
return (error);
|
|
|
|
adapter = (struct adapter *) arg1;
|
|
switch (ixgbe_flow_control) {
|
|
case ixgbe_fc_rx_pause:
|
|
case ixgbe_fc_tx_pause:
|
|
case ixgbe_fc_full:
|
|
adapter->hw.fc.requested_mode = ixgbe_flow_control;
|
|
break;
|
|
case ixgbe_fc_none:
|
|
default:
|
|
adapter->hw.fc.requested_mode = ixgbe_fc_none;
|
|
}
|
|
|
|
ixgbe_fc_enable(&adapter->hw, 0);
|
|
return error;
|
|
}
|
|
|
|
static void
|
|
ixgbe_add_rx_process_limit(struct adapter *adapter, const char *name,
|
|
const char *description, int *limit, int value)
|
|
{
|
|
*limit = value;
|
|
SYSCTL_ADD_INT(device_get_sysctl_ctx(adapter->dev),
|
|
SYSCTL_CHILDREN(device_get_sysctl_tree(adapter->dev)),
|
|
OID_AUTO, name, CTLTYPE_INT|CTLFLAG_RW, limit, value, description);
|
|
}
|
|
|
|
#ifdef IXGBE_IEEE1588
|
|
|
|
/*
|
|
** ixgbe_hwtstamp_ioctl - control hardware time stamping
|
|
**
|
|
** Outgoing time stamping can be enabled and disabled. Play nice and
|
|
** disable it when requested, although it shouldn't case any overhead
|
|
** when no packet needs it. At most one packet in the queue may be
|
|
** marked for time stamping, otherwise it would be impossible to tell
|
|
** for sure to which packet the hardware time stamp belongs.
|
|
**
|
|
** Incoming time stamping has to be configured via the hardware
|
|
** filters. Not all combinations are supported, in particular event
|
|
** type has to be specified. Matching the kind of event packet is
|
|
** not supported, with the exception of "all V2 events regardless of
|
|
** level 2 or 4".
|
|
**
|
|
*/
|
|
static int
|
|
ixgbe_hwtstamp_ioctl(struct adapter *adapter, struct ifreq *ifr)
|
|
{
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
struct hwtstamp_ctrl *config;
|
|
u32 tsync_tx_ctl_bit = IXGBE_TSYNCTXCTL_ENABLED;
|
|
u32 tsync_rx_ctl_bit = IXGBE_TSYNCRXCTL_ENABLED;
|
|
u32 tsync_rx_ctl_type = 0;
|
|
u32 tsync_rx_cfg = 0;
|
|
int is_l4 = 0;
|
|
int is_l2 = 0;
|
|
u16 port = 319; /* PTP */
|
|
u32 regval;
|
|
|
|
config = (struct hwtstamp_ctrl *) ifr->ifr_data;
|
|
|
|
/* reserved for future extensions */
|
|
if (config->flags)
|
|
return (EINVAL);
|
|
|
|
switch (config->tx_type) {
|
|
case HWTSTAMP_TX_OFF:
|
|
tsync_tx_ctl_bit = 0;
|
|
break;
|
|
case HWTSTAMP_TX_ON:
|
|
tsync_tx_ctl_bit = IXGBE_TSYNCTXCTL_ENABLED;
|
|
break;
|
|
default:
|
|
return (ERANGE);
|
|
}
|
|
|
|
switch (config->rx_filter) {
|
|
case HWTSTAMP_FILTER_NONE:
|
|
tsync_rx_ctl_bit = 0;
|
|
break;
|
|
case HWTSTAMP_FILTER_PTP_V1_L4_EVENT:
|
|
case HWTSTAMP_FILTER_PTP_V2_L4_EVENT:
|
|
case HWTSTAMP_FILTER_PTP_V2_L2_EVENT:
|
|
case HWTSTAMP_FILTER_ALL:
|
|
/*
|
|
* register TSYNCRXCFG must be set, therefore it is not
|
|
* possible to time stamp both Sync and Delay_Req messages
|
|
* => fall back to time stamping all packets
|
|
*/
|
|
tsync_rx_ctl_type = IXGBE_TSYNCRXCTL_TYPE_ALL;
|
|
config->rx_filter = HWTSTAMP_FILTER_ALL;
|
|
break;
|
|
case HWTSTAMP_FILTER_PTP_V1_L4_SYNC:
|
|
tsync_rx_ctl_type = IXGBE_TSYNCRXCTL_TYPE_L4_V1;
|
|
tsync_rx_cfg = IXGBE_TSYNCRXCFG_PTP_V1_SYNC_MESSAGE;
|
|
is_l4 = 1;
|
|
break;
|
|
case HWTSTAMP_FILTER_PTP_V1_L4_DELAY_REQ:
|
|
tsync_rx_ctl_type = IXGBE_TSYNCRXCTL_TYPE_L4_V1;
|
|
tsync_rx_cfg = IXGBE_TSYNCRXCFG_PTP_V1_DELAY_REQ_MESSAGE;
|
|
is_l4 = 1;
|
|
break;
|
|
case HWTSTAMP_FILTER_PTP_V2_L2_SYNC:
|
|
case HWTSTAMP_FILTER_PTP_V2_L4_SYNC:
|
|
tsync_rx_ctl_type = IXGBE_TSYNCRXCTL_TYPE_L2_L4_V2;
|
|
tsync_rx_cfg = IXGBE_TSYNCRXCFG_PTP_V2_SYNC_MESSAGE;
|
|
is_l2 = 1;
|
|
is_l4 = 1;
|
|
config->rx_filter = HWTSTAMP_FILTER_SOME;
|
|
break;
|
|
case HWTSTAMP_FILTER_PTP_V2_L2_DELAY_REQ:
|
|
case HWTSTAMP_FILTER_PTP_V2_L4_DELAY_REQ:
|
|
tsync_rx_ctl_type = IXGBE_TSYNCRXCTL_TYPE_L2_L4_V2;
|
|
tsync_rx_cfg = IXGBE_TSYNCRXCFG_PTP_V2_DELAY_REQ_MESSAGE;
|
|
is_l2 = 1;
|
|
is_l4 = 1;
|
|
config->rx_filter = HWTSTAMP_FILTER_SOME;
|
|
break;
|
|
case HWTSTAMP_FILTER_PTP_V2_EVENT:
|
|
case HWTSTAMP_FILTER_PTP_V2_SYNC:
|
|
case HWTSTAMP_FILTER_PTP_V2_DELAY_REQ:
|
|
tsync_rx_ctl_type = IXGBE_TSYNCRXCTL_TYPE_EVENT_V2;
|
|
config->rx_filter = HWTSTAMP_FILTER_PTP_V2_EVENT;
|
|
is_l2 = 1;
|
|
break;
|
|
default:
|
|
return -ERANGE;
|
|
}
|
|
|
|
/* enable/disable TX */
|
|
regval = IXGBE_READ_REG(hw, IXGBE_TSYNCTXCTL);
|
|
regval = (regval & ~IXGBE_TSYNCTXCTL_ENABLED) | tsync_tx_ctl_bit;
|
|
IXGBE_WRITE_REG(hw, IXGBE_TSYNCTXCTL, regval);
|
|
|
|
/* enable/disable RX, define which PTP packets are time stamped */
|
|
regval = IXGBE_READ_REG(hw, IXGBE_TSYNCRXCTL);
|
|
regval = (regval & ~IXGBE_TSYNCRXCTL_ENABLED) | tsync_rx_ctl_bit;
|
|
regval = (regval & ~0xE) | tsync_rx_ctl_type;
|
|
IXGBE_WRITE_REG(hw, IXGBE_TSYNCRXCTL, regval);
|
|
IXGBE_WRITE_REG(hw, IXGBE_TSYNCRXCFG, tsync_rx_cfg);
|
|
|
|
/*
|
|
* Ethertype Filter Queue Filter[0][15:0] = 0x88F7
|
|
* (Ethertype to filter on)
|
|
* Ethertype Filter Queue Filter[0][26] = 0x1 (Enable filter)
|
|
* Ethertype Filter Queue Filter[0][30] = 0x1 (Enable Timestamping)
|
|
*/
|
|
IXGBE_WRITE_REG(hw, IXGBE_ETQF0, is_l2 ? 0x440088f7 : 0);
|
|
|
|
/* L4 Queue Filter[0]: only filter by source and destination port */
|
|
IXGBE_WRITE_REG(hw, IXGBE_SPQF0, htons(port));
|
|
IXGBE_WRITE_REG(hw, IXGBE_IMIREXT(0), is_l4 ?
|
|
((1<<12) | (1<<19) /* bypass size and control flags */) : 0);
|
|
IXGBE_WRITE_REG(hw, IXGBE_IMIR(0), is_l4 ?
|
|
(htons(port)
|
|
| (0<<16) /* immediate interrupt disabled */
|
|
| 0 /* (1<<17) bit cleared: do not bypass
|
|
destination port check */)
|
|
: 0);
|
|
IXGBE_WRITE_REG(hw, IXGBE_FTQF0, is_l4 ?
|
|
(0x11 /* UDP */
|
|
| (1<<15) /* VF not compared */
|
|
| (1<<27) /* Enable Timestamping */
|
|
| (7<<28) /* only source port filter enabled,
|
|
source/target address and protocol
|
|
masked */)
|
|
: ((1<<15) | (15<<28) /* all mask bits set = filter not
|
|
enabled */));
|
|
|
|
wrfl();
|
|
|
|
adapter->hwtstamp_ctrl = config;
|
|
|
|
/* clear TX/RX time stamp registers, just to be sure */
|
|
regval = IXGBE_READ_REG(hw, IXGBE_TXSTMPH);
|
|
regval = IXGBE_READ_REG(hw, IXGBE_RXSTMPH);
|
|
|
|
return (error);
|
|
}
|
|
|
|
/*
|
|
** ixgbe_read_clock - read raw cycle counter (to be used by time counter)
|
|
*/
|
|
static cycle_t ixgbe_read_clock(const struct cyclecounter *tc)
|
|
{
|
|
struct adapter *adapter =
|
|
container_of(tc, struct igb_adapter, cycles);
|
|
struct ixgbe_hw *hw = &adapter->hw;
|
|
u64 stamp;
|
|
|
|
stamp = IXGBE_READ_REG(hw, IXGBE_SYSTIML);
|
|
stamp |= (u64)IXGBE_READ_REG(hw, IXGBE_SYSTIMH) << 32ULL;
|
|
|
|
return (stamp);
|
|
}
|
|
|
|
#endif /* IXGBE_IEEE1588 */
|